Texture displacement: keep a tooltip on screen long enough to be seen

A tooltip appeared only on the next pixel of mouse movement after its wait had finished. ImGui hides a window on the first frame it is submitted, to measure it before showing it, and does so every time a tooltip reappears because those windows are recycled (the Popup|Tooltip branch of Begin()). So the frame a tooltip is decided on is never the frame it is seen on, and one carrying no animation asked for nothing further - leaving it in its hidden measuring frame until some other event happened to produce the next one. Before the hover delay this never showed, because the tooltip was submitted on every mouse-move frame and the movement supplied the second. It now asks for frames until it has been drawn twice in a row.
Texture displacement: no tooltip while a control is being used, and a wait
2026-10-14 11:21:18 +00:00 · 2026-10-13 14:30:53 +02:00 · 2026-10-13 14:21:55 +02:00 · 2026-10-13 13:58:52 +02:00 · 2026-10-13 13:53:06 +02:00 · 2026-10-13 13:33:05 +02:00
294 changed files with 13566 additions and 179 deletions
@@ -0,0 +1,131 @@
+# Tooltip illustrations
+
+The texture-displacement panel's tooltips can carry a picture under their text: a still image, or a
+short animation that loops while the tooltip is open. Several settings in that panel describe a shape
+rather than a number - what Rotation turns, what Tile repeats, what Invert turns inside out - and a
+sentence about a shape is read twice and understood once.
+
+## Where a tooltip is drawn
+
+`GLGizmoTextureDisplacement::panel_tooltip()` replaces `ImGuiWrapper::tooltip()` throughout the panel.
+It differs in two ways.
+
+It places the tooltip beside the panel instead of under the mouse. The panel is pinned to the right
+edge of the canvas, so a tooltip following the mouse covers the control it is explaining, and one
+carrying a picture covers most of the panel with it. The tooltip goes to the left of
+`m_tooltip_anchor_min`/`_max` - the panel's own screen rectangle, or the texture picker's while that
+popup is up and the tooltip comes from inside it - and to the right only when there is no room on the
+left. This is the placement the picker popup itself already uses.
+
+ImGui normally keeps a tooltip glued to the mouse and ignores `SetNextWindowPos()`. Orca's imgui
+branch honours a position set for a tooltip (see the `ImGuiWindowFlags_Tooltip` branch of `Begin()` in
+`deps_src/imgui/imgui.cpp`) and still clamps the result inside the canvas, which is what keeps a tall
+tooltip near the bottom edge on screen.
+
+It also gives the tooltip a fixed width rather than one derived from its text, because a picture has
+to be laid out against something, and a column of tooltips that are all one width is steadier to read.
+
+## Where the pictures live
+
+`resources/images/texture_displacement/`, as PNG, JPG, BMP or GIF. A tooltip names them by file:
+
+```cpp
+hover_tip(_u8L("Repeats the texture across the painted area. ..."),
+          { { "tile_off.png", _L("Off") }, { "tile_on.png", _L("On") } });
+```
+
+Several in one tooltip are laid out side by side at equal widths, which is how a setting is shown as a
+comparison - the same model at two values of it. The caption under each is translated; the file name
+is not.
+
+A file that is missing or will not decode is skipped, and a tooltip whose pictures are all missing is
+exactly the text tooltip it was before. So the art for a tooltip can land after the tooltip does, and
+a half-finished set never breaks the panel.
+
+## When a tooltip appears
+
+A tooltip waits for the pointer to rest on its control for 0.45 s. The panel is dense and the tooltip
+lands on the model beside it, so with no wait a sweep from the top of the panel down to Bake flashes a
+dozen large panels over the scene. Once one has just been up, the wait drops to 0.1 s for 0.7 s
+afterwards, so reading several settings in a row stays quick - but not to zero, or that same sweep
+would flash again the moment one tooltip had been seen.
+
+No tooltip appears at all while a control is being used - a slider dragged, a value typed into one, a
+combo open, a layer card being dragged. The pointer sits on the very thing being edited, so a tooltip
+there covers the model exactly while the user is watching it change. The full wait comes back
+afterwards rather than the short one: having just let go of a slider is not a reason to be shown a
+picture of it.
+
+A pointer resting on a control produces no events, and the canvas only renders when something asks it
+to, so the wait has to ask for its own frames, and so does an animation once one is on screen. So does
+a tooltip that has just appeared, animated or not: ImGui hides a window on the first frame it is
+submitted while it measures it, and does so every time a tooltip reappears because those windows are
+recycled, so the frame a tooltip is decided on is never the frame it is seen on. Both use
+`GLCanvas3D::request_extra_frame()`, which ends `on_idle()` with `evt.RequestMore()` and so obliges wx
+to deliver the next idle. `schedule_extra_frame()` is not enough on its own: it only arranges a timer
+whose event an idle event is assumed to follow, and on_idle renders nothing unless the canvas was
+already dirty when it ran. Asking for frames as fast as they come is safe here because which frame is
+drawn comes from the clock, not from the frame count, so a redraw that arrives early simply draws the
+same frame again.
+
+## Decoding and playback
+
+`slic3r/GUI/AnimatedTexture.hpp` decodes a file once and uploads one GL texture per frame. Stills go
+through `wxImage`; GIFs go through `wxGIFDecoder`, whose raw palette indices are composited here frame
+by frame, replaying the disposal method each frame asks for. That replay is what makes an animation
+look continuous: a GIF frame is a sub-rectangle drawn over what came before it, so an animation that
+only re-sends the pixels that changed draws as a flicker of disconnected patches without it.
+
+A frame delay of 0 or 1 hundredths of a second is read as 100 ms, the convention browsers settle on,
+so an animation authored against that plays at the speed it was authored at.
+
+The animation restarts when its tooltip opens, rather than running off a free-running clock: these are
+short loops of one setting going from one value to another, and joining one halfway through shows the
+end of a change the user never saw the start of.
+
+Which frame is drawn is measured on a real clock, not `ImGui::GetTime()`. Nothing in OrcaSlicer ever sets
+`io.DeltaTime`, so it keeps imgui's default of 1/60 per frame and imgui's clock counts frames rather
+than seconds. On a canvas that renders only when asked, that is not a clock at all: an animation driven
+by it crawls while the canvas is idle and races while a moving mouse is rendering it flat out.
+
+## Making one
+
+`scripts/gen_texture_displacement_tips.py` draws the lot, in four languages, picked by what the
+setting actually is:
+
+- **A shaded relief**, for the settings that are about a pattern: Depth, Tile, Tile size, Rotation,
+  Repeat/Mirror, Smoothing, Edge fade, Invert, Blend and the Normal, Fast, Checker and Distortion
+  views. One motif - a ring inside a square frame - runs through all of them, because using one shape
+  everywhere is what lets two pictures be compared: whatever differs between them is the setting,
+  since nothing else is.
+- **A flat mesh of triangles**, for the settings that are about the mesh or about a tool: the paint
+  tools, brush size, the connected-area fill, subdivision, feature-adaptive refinement, remeshing,
+  hard edges, slivers and the wireframe view. These carry the one accent colour in the set, meaning
+  "painted", because that is the only thing in such a picture that is not geometry.
+- **A section**, for Midlevel and for smoothing the geometry. The reason generalises: shading reads
+  slopes, so a height field moved up or down as a whole shades identically to where it started, and
+  any setting whose meaning is *where the surface sits relative to where it was* is invisible from
+  above and has to be drawn from the side.
+- **A flat ramp of greys**, for Mix filaments, Mixed colors and Denoise. Those are about which
+  filament a spot ends up as; lighting one would only add a second thing changing between two
+  pictures meant to differ in one.
+
+The five Mapping pictures are one ball with a checker laid on it five ways, which is the whole of what
+choosing a projection does - except Unwrap, which is not a projection onto the model at all and so is
+drawn as the flat layout it produces.
+
+Captures of the real tool are still the first choice for anything involving a real model or real
+filament colour: Bake, the mixed-colour count on a photograph, Adjust placement, the frame window and
+the UV editor's seam tool have no picture yet for that reason.
+
+Either way:
+
+- Square, around 256 px (192 for an animation, where every frame ships). The tooltip is about 20 em
+  wide, so that is roughly native size on a 100% display and downscales cleanly above it. A single
+  picture is capped at 10 em tall and centred, two side by side take half the width each.
+- Neutral grey. These say what a shape does; colour in one reads as a third thing the setting does,
+  and has to work against both themes.
+- Animations loop seamlessly and stay short - 16 frames at 100 ms, under about 150 KB. They sit in
+  `resources/`, which ships with every copy of the application. A sweep driven by a cosine over the
+  frame count loops with no step, since it starts and ends at the same value and the same rate.
+- No text in the picture. Captions are translated; pixels are not.
@@ -7478,7 +7478,7 @@ msgid "Update"
 msgstr "更新"

 msgid "Assistant(HMS)"
-msgstr "助理（HMS）"
+msgstr "助手(HMS)"

 #, c-format, boost-format
 msgid "Network plug-in v%s"
@@ -0,0 +1,3 @@
+<svg width="28" height="27" viewBox="0 0 28 27" fill="none" xmlns="http://www.w3.org/2000/svg">
+<path transform="matrix(0.9 0 0 0.9 1.4 1.35)" d="M11.9888 2.01601C12.8984 0.494662 15.1024 0.494662 16.012 2.01601L18.8677 6.79237C19.1958 7.34113 19.7339 7.73201 20.3572 7.87447L25.7821 9.11446C27.5101 9.50943 28.1913 11.6056 27.0254 12.9408L23.3652 17.1327C22.9449 17.6143 22.7394 18.2469 22.7964 18.8836L23.2936 24.4263C23.4519 26.1918 21.6687 27.4873 20.0386 26.7911L14.9209 24.6056C14.3329 24.3545 13.6679 24.3545 13.0799 24.6056L7.96209 26.7911C6.33196 27.4873 4.54887 26.1918 4.70722 24.4263L5.20434 18.8836C5.26145 18.2469 5.05595 17.6143 4.63544 17.1327L0.97533 12.9408C-0.19048 11.6056 0.490599 9.50943 2.21859 9.11446L7.64364 7.87447C8.2669 7.73201 8.80494 7.34113 9.13302 6.79237L11.9888 2.01601Z" stroke="#949494" stroke-width="2.4" stroke-linejoin="round"/>
+</svg>
@@ -0,0 +1,790 @@
+{
+	"name": "FELIX Printers",
+	"version": "1.0.0",
+	"force_update": "0",
+	"description": "Configuration file for printers by FELIX Printers",
+	"machine_model_list": [
+		{
+			"name": "FELIX Food Double",
+			"sub_path": "machine/FELIX Food Double.json"
+		},
+		{
+			"name": "FELIX Food Single",
+			"sub_path": "machine/FELIX Food Single.json"
+		},
+		{
+			"name": "FELIX Food Switch",
+			"sub_path": "machine/FELIX Food Switch.json"
+		},
+		{
+			"name": "FELIX Pro 3",
+			"sub_path": "machine/FELIX Pro 3.json"
+		},
+		{
+			"name": "FELIX Pro L 3.0",
+			"sub_path": "machine/FELIX Pro L 3.0.json"
+		},
+		{
+			"name": "FELIX Pro XL 3.0",
+			"sub_path": "machine/FELIX Pro XL 3.0.json"
+		},
+		{
+			"name": "FELIX Tec 4",
+			"sub_path": "machine/FELIX Tec 4.json"
+		}
+	],
+	"machine_list": [
+		{
+			"name": "fdm_all_machines_common",
+			"sub_path": "machine/fdm_all_machines_common.json"
+		},
+		{
+			"name": "fdm_felix_food_common",
+			"sub_path": "machine/fdm_felix_food_common.json"
+		},
+		{
+			"name": "fdm_felix_food_double_common",
+			"sub_path": "machine/fdm_felix_food_double_common.json"
+		},
+		{
+			"name": "fdm_felix_food_switch_common",
+			"sub_path": "machine/fdm_felix_food_switch_common.json"
+		},
+		{
+			"name": "fdm_felix_plastic_common",
+			"sub_path": "machine/fdm_felix_plastic_common.json"
+		},
+		{
+			"name": "fdm_felix_pro_3_common",
+			"sub_path": "machine/fdm_felix_pro_3_common.json"
+		},
+		{
+			"name": "fdm_felix_pro_l_3_common",
+			"sub_path": "machine/fdm_felix_pro_l_3.json"
+		},
+		{
+			"name": "fdm_felix_pro_xl_3_common",
+			"sub_path": "machine/fdm_felix_pro_xl_3_common.json"
+		},
+		{
+			"name": "fdm_felix_tec_common",
+			"sub_path": "machine/fdm_felix_tec_common.json"
+		},
+		{
+			"name": "FELIX Food Single 0.50mm nozzle",
+			"sub_path": "machine/FELIX Food Single 0.50mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Single 1.00mm nozzle",
+			"sub_path": "machine/FELIX Food Single 1.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Single 2.00mm nozzle",
+			"sub_path": "machine/FELIX Food Single 2.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Single 3.00mm nozzle",
+			"sub_path": "machine/FELIX Food Single 3.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Single 4.00mm nozzle",
+			"sub_path": "machine/FELIX Food Single 4.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Double 0.50mm nozzle",
+			"sub_path": "machine/FELIX Food Double 0.50mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Double 1.00mm nozzle",
+			"sub_path": "machine/FELIX Food Double 1.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Double 2.00mm nozzle",
+			"sub_path": "machine/FELIX Food Double 2.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Double 3.00mm nozzle",
+			"sub_path": "machine/FELIX Food Double 3.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Double 4.00mm nozzle",
+			"sub_path": "machine/FELIX Food Double 4.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Switch 0.50mm nozzle",
+			"sub_path": "machine/FELIX Food Switch 0.50mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Switch 1.00mm nozzle",
+			"sub_path": "machine/FELIX Food Switch 1.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Switch 2.00mm nozzle",
+			"sub_path": "machine/FELIX Food Switch 2.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Switch 3.00mm nozzle",
+			"sub_path": "machine/FELIX Food Switch 3.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Food Switch 4.00mm nozzle",
+			"sub_path": "machine/FELIX Food Switch 4.00mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro 3 0.25mm nozzle",
+			"sub_path": "machine/FELIX Pro 3 0.25mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro 3 0.35mm nozzle",
+			"sub_path": "machine/FELIX Pro 3 0.35mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro 3 0.50mm nozzle",
+			"sub_path": "machine/FELIX Pro 3 0.50mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro 3 0.70mm nozzle",
+			"sub_path": "machine/FELIX Pro 3 0.70mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro L 3.0 0.25mm nozzle",
+			"sub_path": "machine/FELIX Pro L 3.0 0.25mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro L 3.0 0.35mm nozzle",
+			"sub_path": "machine/FELIX Pro L 3.0 0.35mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro L 3.0 0.50mm nozzle",
+			"sub_path": "machine/FELIX Pro L 3.0 0.50mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro L 3.0 0.70mm nozzle",
+			"sub_path": "machine/FELIX Pro L 3.0 0.70mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro XL 3.0 0.25mm nozzle",
+			"sub_path": "machine/FELIX Pro XL 3.0 0.25mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro XL 3.0 0.35mm nozzle",
+			"sub_path": "machine/FELIX Pro XL 3.0 0.35mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro XL 3.0 0.50mm nozzle",
+			"sub_path": "machine/FELIX Pro XL 3.0 0.50mm nozzle.json"
+		},
+		{
+			"name": "FELIX Pro XL 3.0 0.70mm nozzle",
+			"sub_path": "machine/FELIX Pro XL 3.0 0.70mm nozzle.json"
+		},
+		{
+			"name": "FELIX Tec 4 0.25mm nozzle",
+			"sub_path": "machine/FELIX Tec 4 0.25mm nozzle.json"
+		},
+		{
+			"name": "FELIX Tec 4 0.35mm nozzle",
+			"sub_path": "machine/FELIX Tec 4 0.35mm nozzle.json"
+		},
+		{
+			"name": "FELIX Tec 4 0.50mm nozzle",
+			"sub_path": "machine/FELIX Tec 4 0.50mm nozzle.json"
+		},
+		{
+			"name": "FELIX Tec 4 0.70mm nozzle",
+			"sub_path": "machine/FELIX Tec 4 0.70mm nozzle.json"
+		}
+	],
+	"process_list": [
+		{
+			"name": "fdm_process_common",
+			"sub_path": "process/fdm_process_common.json"
+		},
+		{
+			"name": "fdm_process_felix_food_common",
+			"sub_path": "process/fdm_process_felix_food_common.json"
+		},
+		{
+			"name": "fdm_process_felix_plastic_common",
+			"sub_path": "process/fdm_process_felix_plastic_common.json"
+		},
+		{
+			"name": "FELIX Food Coarse @ 0.50mm",
+			"sub_path": "process/FELIX Food Coarse @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Food Coarse @ 1.00mm",
+			"sub_path": "process/FELIX Food Coarse @ 1.00mm.json"
+		},
+		{
+			"name": "FELIX Food Coarse @ 2.00mm",
+			"sub_path": "process/FELIX Food Coarse @ 2.00mm.json"
+		},
+		{
+			"name": "FELIX Food Coarse @ 3.00mm",
+			"sub_path": "process/FELIX Food Coarse @ 3.00mm.json"
+		},
+		{
+			"name": "FELIX Food Coarse @ 4.00mm",
+			"sub_path": "process/FELIX Food Coarse @ 4.00mm.json"
+		},
+		{
+			"name": "FELIX Food Fine @ 0.50mm",
+			"sub_path": "process/FELIX Food Fine @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Food Fine @ 1.00mm",
+			"sub_path": "process/FELIX Food Fine @ 1.00mm.json"
+		},
+		{
+			"name": "FELIX Food Fine @ 2.00mm",
+			"sub_path": "process/FELIX Food Fine @ 2.00mm.json"
+		},
+		{
+			"name": "FELIX Food Fine @ 3.00mm",
+			"sub_path": "process/FELIX Food Fine @ 3.00mm.json"
+		},
+		{
+			"name": "FELIX Food Fine @ 4.00mm",
+			"sub_path": "process/FELIX Food Fine @ 4.00mm.json"
+		},
+		{
+			"name": "FELIX Food Normal @ 0.50mm",
+			"sub_path": "process/FELIX Food Normal @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Food Normal @ 1.00mm",
+			"sub_path": "process/FELIX Food Normal @ 1.00mm.json"
+		},
+		{
+			"name": "FELIX Food Normal @ 2.00mm",
+			"sub_path": "process/FELIX Food Normal @ 2.00mm.json"
+		},
+		{
+			"name": "FELIX Food Normal @ 3.00mm",
+			"sub_path": "process/FELIX Food Normal @ 3.00mm.json"
+		},
+		{
+			"name": "FELIX Food Normal @ 4.00mm",
+			"sub_path": "process/FELIX Food Normal @ 4.00mm.json"
+		},
+		{
+			"name": "FELIX Plastic Coarse @ 0.35mm",
+			"sub_path": "process/FELIX Plastic Coarse @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Plastic Coarse @ 0.50mm",
+			"sub_path": "process/FELIX Plastic Coarse @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Plastic Coarse @ 0.70mm",
+			"sub_path": "process/FELIX Plastic Coarse @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Plastic Fine @ 0.25mm",
+			"sub_path": "process/FELIX Plastic Fine @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX Plastic Fine @ 0.35mm",
+			"sub_path": "process/FELIX Plastic Fine @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Plastic Fine @ 0.50mm",
+			"sub_path": "process/FELIX Plastic Fine @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Plastic Fine @ 0.70mm",
+			"sub_path": "process/FELIX Plastic Fine @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Plastic Normal @ 0.25mm",
+			"sub_path": "process/FELIX Plastic Normal @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX Plastic Normal @ 0.35mm",
+			"sub_path": "process/FELIX Plastic Normal @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Plastic Normal @ 0.50mm",
+			"sub_path": "process/FELIX Plastic Normal @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Plastic Normal @ 0.70mm",
+			"sub_path": "process/FELIX Plastic Normal @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Plastic Slightly Coarse @ 0.35mm",
+			"sub_path": "process/FELIX Plastic Slightly Coarse @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Plastic Slightly Coarse @ 0.50mm",
+			"sub_path": "process/FELIX Plastic Slightly Coarse @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Plastic Slightly Coarse @ 0.70mm",
+			"sub_path": "process/FELIX Plastic Slightly Coarse @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Plastic Super Coarse @ 0.70mm",
+			"sub_path": "process/FELIX Plastic Super Coarse @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Plastic Super Fine @ 0.25mm",
+			"sub_path": "process/FELIX Plastic Super Fine @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX Plastic Super Fine @ 0.35mm",
+			"sub_path": "process/FELIX Plastic Super Fine @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Plastic Very Coarse @ 0.50mm",
+			"sub_path": "process/FELIX Plastic Very Coarse @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Plastic Very Coarse @ 0.70mm",
+			"sub_path": "process/FELIX Plastic Very Coarse @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Plastic Very Fine @ 0.25mm",
+			"sub_path": "process/FELIX Plastic Very Fine @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX Plastic Very Fine @ 0.35mm",
+			"sub_path": "process/FELIX Plastic Very Fine @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Plastic Very Fine @ 0.50mm",
+			"sub_path": "process/FELIX Plastic Very Fine @ 0.50mm.json"
+		}
+	],
+	"filament_list": [
+		{
+			"name": "fdm_filament_common",
+			"sub_path": "filament/fdm_filament_common.json"
+		},
+		{
+			"name": "fdm_filament_food",
+			"sub_path": "filament/fdm_filament_food.json"
+		},
+		{
+			"name": "fdm_filament_abs",
+			"sub_path": "filament/fdm_filament_abs.json"
+		},
+		{
+			"name": "fdm_filament_asa",
+			"sub_path": "filament/fdm_filament_asa.json"
+		},
+		{
+			"name": "fdm_filament_flex",
+			"sub_path": "filament/fdm_filament_flex.json"
+		},
+		{
+			"name": "fdm_filament_pa",
+			"sub_path": "filament/fdm_filament_pa.json"
+		},
+		{
+			"name": "fdm_filament_pa11cf",
+			"sub_path": "filament/fdm_filament_pa11cf.json"
+		},
+		{
+			"name": "fdm_filament_pc",
+			"sub_path": "filament/fdm_filament_pc.json"
+		},
+		{
+			"name": "fdm_filament_pccf",
+			"sub_path": "filament/fdm_filament_pccf.json"
+		},
+		{
+			"name": "fdm_filament_pet",
+			"sub_path": "filament/fdm_filament_pet.json"
+		},
+		{
+			"name": "fdm_filament_pla",
+			"sub_path": "filament/fdm_filament_pla.json"
+		},
+		{
+			"name": "fdm_filament_pva",
+			"sub_path": "filament/fdm_filament_pva.json"
+		},
+		{
+			"name": "fdm_filament_pvb",
+			"sub_path": "filament/fdm_filament_pvb.json"
+		},
+		{
+			"name": "fdm_filament_tpu",
+			"sub_path": "filament/fdm_filament_tpu.json"
+		},
+		{
+			"name": "Food Medium Plastic Syringe @0.50mm",
+			"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @0.50mm.json"
+		},
+		{
+			"name": "Food Medium Plastic Syringe @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @1.00mm.json"
+		},
+		{
+			"name": "Food Medium Plastic Syringe @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @2.00mm.json"
+		},
+		{
+			"name": "Food Medium Plastic Syringe @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @3.00mm.json"
+		},
+		{
+			"name": "Food Medium Plastic Syringe @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Plastic Syringe @4.00mm.json"
+		},
+		{
+			"name": "Food Medium Stainless Steel Syringe @0.50mm",
+			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @0.50mm.json"
+		},
+		{
+			"name": "Food Medium Stainless Steel Syringe @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @1.00mm.json"
+		},
+		{
+			"name": "Food Medium Stainless Steel Syringe @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @2.00mm.json"
+		},
+		{
+			"name": "Food Medium Stainless Steel Syringe @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @3.00mm.json"
+		},
+		{
+			"name": "Food Medium Stainless Steel Syringe @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Medium Stainless Steel Syringe @4.00mm.json"
+		},
+		{
+			"name": "Food Thick Stainless Steel Syringe @0.50mm",
+			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @0.50mm.json"
+		},
+		{
+			"name": "Food Thick Stainless Steel Syringe @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @1.00mm.json"
+		},
+		{
+			"name": "Food Thick Stainless Steel Syringe @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @2.00mm.json"
+		},
+		{
+			"name": "Food Thick Stainless Steel Syringe @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @3.00mm.json"
+		},
+		{
+			"name": "Food Thick Stainless Steel Syringe @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Thick Stainless Steel Syringe @4.00mm.json"
+		},
+		{
+			"name": "Food Thin Plastic Syringe @0.50mm",
+			"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @0.50mm.json"
+		},
+		{
+			"name": "Food Thin Plastic Syringe @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @1.00mm.json"
+		},
+		{
+			"name": "Food Thin Plastic Syringe @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @2.00mm.json"
+		},
+		{
+			"name": "Food Thin Plastic Syringe @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @3.00mm.json"
+		},
+		{
+			"name": "Food Thin Plastic Syringe @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Plastic Syringe @4.00mm.json"
+		},
+		{
+			"name": "Food Thin Stainless Steel Syringe @0.50mm",
+			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @0.50mm.json"
+		},
+		{
+			"name": "Food Thin Stainless Steel Syringe @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @1.00mm.json"
+		},
+		{
+			"name": "Food Thin Stainless Steel Syringe @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @2.00mm.json"
+		},
+		{
+			"name": "Food Thin Stainless Steel Syringe @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @3.00mm.json"
+		},
+		{
+			"name": "Food Thin Stainless Steel Syringe @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Thin Stainless Steel Syringe @4.00mm.json"
+		},
+		{
+			"name": "Food Very Thick Stainless Steel Syringe @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel Syringe @1.00mm.json"
+		},
+		{
+			"name": "Food Very Thick Stainless Steel Syringe @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel Syringe @2.00mm.json"
+		},
+		{
+			"name": "Food Very Thick Stainless Steel Syringe @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel Syringe @3.00mm.json"
+		},
+		{
+			"name": "Food Very Thick Stainless Steel Syringe @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thick Stainless Steel Syringe @4.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Plastic Syringe @0.50mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @0.50mm.json"
+		},
+		{
+			"name": "Food Very Thin Plastic Syringe @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @1.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Plastic Syringe @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @2.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Plastic Syringe @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @3.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Plastic Syringe @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Plastic Syringe @4.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Stainless Steel  Syringe  @1.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel  Syringe  @1.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Stainless Steel  Syringe  @2.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel  Syringe  @2.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Stainless Steel  Syringe  @3.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel  Syringe  @3.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Stainless Steel  Syringe  @4.00mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel  Syringe  @4.00mm.json"
+		},
+		{
+			"name": "Food Very Thin Stainless Steel Syringe @0.50mm",
+			"sub_path": "filament/FELIXFood/Food Very Thin Stainless Steel Syringe @0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA TitanX ABS Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA TitanX ABS Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA TitanX ABS Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA TitanX ABS Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "Ultrafuse ABS Fusion+ Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Brass @ 0.35mm.json"
+		},
+		{
+			"name": "Ultrafuse ABS Fusion+ Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Brass @ 0.50mm.json"
+		},
+		{
+			"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "Ultrafuse ABS Fusion+ Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/Ultrafuse ABS Fusion+ Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "FORMFUTURA AppoloX ASA Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA AppoloX ASA Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA AppoloX ASA Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA AppoloX ASA Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX FLEX  Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX FLEX  Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX FLEX  Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX FLEX  Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX FLEX Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX FLEX Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX FLEX Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX FLEX Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FELIX FLEX Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX PETG Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX PETG Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX PETG Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX PETG Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX PETG Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX PETG Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX PETG Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX PETG Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FELIX PETG Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Premium PLA Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Premium PLA Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Premium PLA Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX Premium PLA Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Premium PLA Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Premium PLA Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Premium PLA Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "FELIX Wood  Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Wood  Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Wood Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Wood Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Wood Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FELIX Wood Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FELIX Wood Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FELIX Wood Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FELIX Wood Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "FORMFUTURA ePLA Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA ePLA Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA ePLA Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FORMFUTURA ePLA Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA ePLA Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA ePLA Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA ePLA Hardened Steel @ 0.70mm.json"
+		},
+		{
+			"name": "FORMFUTURA Aquasolve PVA Brass @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Brass @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA Aquasolve PVA Brass @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Brass @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.25mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.25mm.json"
+		},
+		{
+			"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.35mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.35mm.json"
+		},
+		{
+			"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.50mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.50mm.json"
+		},
+		{
+			"name": "FORMFUTURA Aquasolve PVA Hardened Steel @ 0.70mm",
+			"sub_path": "filament/FELIXPlastic/FORMFUTURA Aquasolve PVA Hardened Steel @ 0.70mm.json"
+		}
+	]
+}
@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 512 512" xmlns:c2pa="http://c2pa.org/manifest">
+  <rect x="0" y="0" width="512" height="512" fill="none"/>
+  <g fill="#ffffff" transform="translate(5,460) scale(0.2)">
+    <g>
+      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
+      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
+      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
+    </g>
+    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
+    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
+    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
+    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
+    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
+    <g>
+      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
+      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
+      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
+      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
+      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
+      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
+      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
+      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
+    </g>
+  </g>
+</svg>
@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 250 195" xmlns:c2pa="http://c2pa.org/manifest">
+  <rect x="0" y="0" width="250" height="195" fill="none"/>
+  <g fill="#ffffff" transform="translate(2,169) scale(0.1)">
+    <g>
+      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
+      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
+      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
+    </g>
+    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
+    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
+    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
+    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
+    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
+    <g>
+      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
+      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
+      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
+      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
+      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
+      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
+      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
+      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
+    </g>
+  </g>
+</svg>
@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 300 400" xmlns:c2pa="http://c2pa.org/manifest">
+  <rect x="0" y="0" width="300" height="400" fill="none"/>
+  <g fill="#ffffff" transform="translate(3,365) scale(0.13)">
+    <g>
+      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
+      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
+      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
+    </g>
+    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
+    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
+    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
+    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
+    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
+    <g>
+      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
+      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
+      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
+      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
+      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
+      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
+      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
+      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
+    </g>
+  </g>
+</svg>
@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 235 244" xmlns:c2pa="http://c2pa.org/manifest">
+  <rect x="0" y="0" width="235" height="244" fill="none"/>
+  <g fill="#ffffff" transform="translate(2,215) scale(0.1)">
+    <g>
+      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
+      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
+      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
+    </g>
+    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
+    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
+    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
+    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
+    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
+    <g>
+      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
+      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
+      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
+      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
+      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
+      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
+      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
+      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
+    </g>
+  </g>
+</svg>
@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 600 400" xmlns:c2pa="http://c2pa.org/manifest">
+  <rect x="0" y="0" width="600" height="400" fill="none"/>
+  <g fill="#ffffff" transform="translate(4,357) scale(0.16)">
+    <g>
+      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
+      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
+      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
+    </g>
+    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
+    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
+    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
+    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
+    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
+    <g>
+      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
+      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
+      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
+      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
+      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
+      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
+      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
+      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
+    </g>
+  </g>
+</svg>
@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="a" xmlns="http://www.w3.org/2000/svg" width="180.62mm" height="180.62mm" viewBox="0 0 205 255" xmlns:c2pa="http://c2pa.org/manifest">
+  <rect x="0" y="0" width="205" height="255" fill="none"/>
+  <g fill="#ffffff" transform="translate(3,228) scale(0.1)">
+    <g>
+      <path d="M139.4.8l-.2,62c-34.3,0-63.4,21.8-73.2,51.9C26.4,141,.2,187.8.2,241.3H0l.2-101.3C.2,63.1,62.4.8,139.4.8Z"/>
+      <path d="M139.1,92.5l-.8,62.5c-42.6,0-77.1,38.6-77.1,86.3l1-103.9c0-7.9,1.3-15.5,3.6-22.7,21.2-14.1,46.3-22.3,73.2-22.3Z"/>
+      <path d="M65.9,114.7c-2.3,7.2-3.6,14.8-3.6,22.7l-1,103.9H.2c0-53.5,26.3-100.3,65.7-126.6Z"/>
+    </g>
+    <polygon points="202.8 .4 202.8 92.9 226.2 92.9 226.2 56 259.8 56 259.8 36.1 226.2 36.1 226.2 19.4 265.7 19.4 265.7 0 202.8 .4"/>
+    <polygon points="282.3 -.3 282.3 93 346.1 93 346.1 72.4 306.8 72.4 306.8 55.6 341.7 55.6 341.7 36.4 306.5 36.4 306.5 19.6 346.2 19.6 346.2 -.3 282.3 -.3"/>
+    <polygon points="365.9 92.8 429.5 92.8 429.5 70.9 389.6 70.9 389.6 .2 365 .2 365.9 92.8"/>
+    <polygon points="448 0 471.9 0 471.9 92.5 447.5 92.5 448 0"/>
+    <path d="M485.1,92.5s34.7-44.3,33.4-46.5S485.7,0,485.7,0h29l18.4,24.8L550.1,0h26.6l-29.9,45.4,33.1,46.8h-28.8l-19.3-27.4-18.9,28.1-27.9-.4Z"/>
+    <g>
+      <path d="M210.9,154.1c-1.9,0-3.7-.2-5.3-.7-1.6-.4-3-1-4.2-1.6v-3.9c1.1.6,2.4,1.1,3.9,1.6,1.5.5,3.2.7,5.1.7,3.1,0,5.5-.6,7.2-1.7,1.7-1.2,2.5-2.8,2.5-5s-.8-3.9-2.5-5c-1.7-1.2-4.2-1.7-7.4-1.7h-3.9v-3.7h4c2.6,0,4.5-.5,5.9-1.5,1.4-1,2-2.4,2-4.2s-.3-2.3-1-3.1c-.6-.8-1.6-1.5-2.8-1.9-1.3-.4-2.8-.7-4.6-.7s-3,.2-4.3.6c-1.3.4-2.4.8-3.3,1.3v-3.9c1.1-.5,2.3-.9,3.6-1.3,1.3-.4,2.8-.5,4.5-.5s4,.3,5.5.8c1.5.5,2.7,1.3,3.6,2.2.9.9,1.6,1.9,2,3.1.4,1.1.6,2.3.6,3.4s-.2,2.4-.7,3.3c-.5.9-1,1.7-1.6,2.2-.6.6-1.4,1.1-2.3,1.6,1.3.7,2.3,1.4,3.2,2.1s1.6,1.7,2.2,2.8c.6,1.1,1,2.5,1,4.2s-.2,2.5-.7,3.8c-.5,1.2-1.2,2.4-2.2,3.4s-2.4,1.8-4,2.4c-1.7.6-3.7.9-6.1.9Z"/>
+      <path d="M232.1,153.7v-35.4h11.1c5.5,0,9.7,1.5,12.4,4.4,2.8,3,4.2,7.4,4.2,13.2s-1.4,10.3-4.2,13.2c-2.8,3-6.9,4.5-12.4,4.5h-11.1ZM235.9,150h7c4.5,0,7.8-1.1,9.9-3.4,2-2.3,3.1-5.8,3.1-10.7s-1-8.4-3.1-10.7c-2-2.3-5.3-3.4-9.9-3.4h-7v28.2Z"/>
+      <path d="M291.9,154.4c-.8,0-1.7-.1-2.6-.3-1-.2-1.9-.5-2.8-.8-.9-.3-1.7-.7-2.4-1l1.3-1.3v14.2h-3.8v-33.2c0-1.1.3-2,1-2.7.7-.7,1.6-1.2,2.7-1.6,1.1-.4,2.3-.6,3.5-.8,1.2-.2,2.4-.2,3.5-.2,2.1,0,4.1.4,6,1.3,1.9.9,3.4,2.4,4.6,4.5s1.7,5,1.7,8.6-.5,5.1-1.5,7.1c-1,2-2.4,3.5-4.3,4.6-1.9,1.1-4.2,1.6-6.9,1.6ZM291.9,150.9c1.9,0,3.5-.4,4.8-1.2,1.3-.8,2.2-2,2.8-3.5.6-1.5,1-3.2,1-5.1s-.2-3.7-.6-5.4c-.4-1.7-1.2-3-2.4-4-1.2-1-3-1.5-5.2-1.5s-3.4.2-4.8.6c-1.4.4-2,1-2,1.8v16.4c1.1.6,2.2,1.1,3.3,1.4s2.2.5,3.3.5Z"/>
+      <path d="M311.1,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1c-.8,0-1.6.2-2.4.3-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M330.5,122.5v-4.2h4.2v4.2h-4.2ZM330.8,153.7v-26.4h3.8v26.4h-3.8Z"/>
+      <path d="M342.7,129.3c.8-.4,1.7-.8,2.6-1.1.9-.3,1.8-.6,2.8-.8.9-.2,1.9-.4,2.9-.5,1-.1,2-.2,2.9-.2,2.6,0,4.6.4,6.1,1.1,1.5.8,2.6,1.9,3.3,3.3.7,1.4,1,3.2,1,5.2v17.2h-3.8v-17.2c0-.6,0-1.3-.2-2-.2-.7-.5-1.4-.9-2-.5-.7-1.2-1.2-2.1-1.6s-2.2-.6-3.8-.6-2.2,0-3.4.3-2.4.4-3.6.8v22.4h-3.8v-24.3Z"/>
+      <path d="M380.7,154.1c-1.9,0-3.4-.6-4.7-1.7-1.3-1.1-1.9-2.9-1.9-5.1v-16.5h-4.6v-3.5h4.6v-7.5h3.8v7.5h6.8v3.5h-6.8v15.3c0,1.5.2,2.6.7,3.3s1.4,1.1,2.8,1.1,1.3,0,1.9-.2,1.1-.3,1.5-.5v3.6c-.5.2-1.1.3-1.9.5s-1.5.2-2.1.2Z"/>
+      <path d="M402,154.4c-2.5,0-4.7-.5-6.5-1.6-1.8-1-3.3-2.6-4.2-4.7-1-2.1-1.5-4.7-1.5-7.8,0-4.6,1-8,3.1-10.3,2.1-2.3,4.9-3.4,8.5-3.4s5.1.6,6.8,1.9c1.7,1.3,2.9,3,3.7,5.1.7,2.2,1.1,4.6,1.1,7.3h-21.3l.3-3.5h18.5l-1.5.5c-.1-2.6-.8-4.6-2-5.9-1.2-1.3-3.1-2-5.6-2s-3.2.3-4.3,1c-1.1.6-2,1.7-2.6,3.3s-.8,3.8-.8,6.6.8,5.7,2.3,7.3c1.5,1.7,3.6,2.5,6.3,2.5s2.5,0,3.6-.3,2.1-.5,3-.8c.9-.4,1.7-.7,2.4-1.2v3.9c-1.3.6-2.7,1.1-4.2,1.4-1.5.3-3.2.5-5.1.5Z"/>
+      <path d="M419.5,153.7v-24.3c.4-.2,1.2-.5,2.5-.9,1.2-.4,2.7-.8,4.4-1.2,1.7-.4,3.5-.5,5.3-.5s.6,0,.8.1c.3,0,.6.1.8.2v3.4c-.9-.1-1.8-.2-2.7-.2s-1.7,0-2.5.1-1.6.2-2.4.3c-.8.1-1.6.3-2.4.4v22.5h-3.8Z"/>
+      <path d="M446.4,154.4c-1.9,0-3.5-.2-4.8-.6s-2.6-.9-4-1.6v-4c1.1.6,2.1,1.1,2.9,1.5s1.7.7,2.6.9c.9.2,1.9.3,3,.3,1.8,0,3.2-.4,4.3-1.2,1.1-.8,1.7-1.8,1.7-3s-.3-1.7-.8-2.3-1.2-1-2.1-1.3c-.8-.4-1.7-.7-2.7-1.1-1-.3-2.1-.6-3.1-.9-1-.3-2-.8-2.9-1.3-.9-.5-1.6-1.3-2.1-2.1-.5-.9-.8-2-.8-3.4s.3-2.5.8-3.4c.5-1,1.3-1.7,2.1-2.4.9-.6,1.9-1.1,3-1.4,1.1-.3,2.2-.4,3.3-.4,1.6,0,2.9.2,4.1.6,1.1.4,2.3.9,3.5,1.4v3.8c-1.3-.7-2.5-1.3-3.6-1.7-1.1-.4-2.3-.7-3.8-.7s-2.7.3-3.9.9c-1.1.6-1.7,1.5-1.7,2.7s.3,1.8.9,2.4,1.4,1,2.3,1.4c1,.3,2,.7,3.1,1,.9.3,1.8.6,2.8.9,1,.3,1.8.8,2.7,1.3.8.5,1.5,1.3,2,2.1.5.9.8,2,.8,3.4s-.5,3.4-1.4,4.6-2.2,2.1-3.6,2.7c-1.5.6-3,.8-4.5.8Z"/>
+    </g>
+  </g>
+</svg>
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Plastic Syringe @0.50mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "IQnumbi0N4BnvMfO",
+	"filament_id": "OFAzgHcF",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 0.50mm nozzle",
+		"FELIX Food Double 0.50mm nozzle",
+		"FELIX Food Switch 0.50mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"3.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"6.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"7.2"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Plastic Syringe @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "p8CG6dHMUxNl7iPL",
+	"filament_id": "OFAzgHcF",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"3.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"6.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"27.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Plastic Syringe @2.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "s5uPS7I3E57tiRRC",
+	"filament_id": "OFAzgHcF",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 2.00mm nozzle",
+		"FELIX Food Double 2.00mm nozzle",
+		"FELIX Food Switch 2.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"3.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"6.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"3.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"108.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Plastic Syringe @3.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "zlZtghh6ytU7N09m",
+	"filament_id": "OFAzgHcF",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 3.00mm nozzle",
+		"FELIX Food Double 3.00mm nozzle",
+		"FELIX Food Switch 3.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"3.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"6.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"4.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"216.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Plastic Syringe @4.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "fvTZEcREMbs3JW1D",
+	"filament_id": "OFAzgHcF",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 4.00mm nozzle",
+		"FELIX Food Double 4.00mm nozzle",
+		"FELIX Food Switch 4.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"3.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"6.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"6.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"432.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Stainless Steel Syringe @0.50mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "2XyqnzMqyuRCqpPq",
+	"filament_id": "OFqZSD1S",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 0.50mm nozzle",
+		"FELIX Food Double 0.50mm nozzle",
+		"FELIX Food Switch 0.50mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"1.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"2.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"7.2"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Stainless Steel Syringe @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "yNxVUGOb1kUbXLiw",
+	"filament_id": "OFqZSD1S",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"1.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"2.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"27.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Stainless Steel Syringe @2.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "4MhgYDnGFKLfurhc",
+	"filament_id": "OFqZSD1S",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 2.00mm nozzle",
+		"FELIX Food Double 2.00mm nozzle",
+		"FELIX Food Switch 2.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"1.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"2.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"3.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"108.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Stainless Steel Syringe @3.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "mEH3Rgzzwjq9iptd",
+	"filament_id": "OFqZSD1S",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 3.00mm nozzle",
+		"FELIX Food Double 3.00mm nozzle",
+		"FELIX Food Switch 3.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"1.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"2.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"4.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"216.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Medium Stainless Steel Syringe @4.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "rJsNSIb8w9kOwhwE",
+	"filament_id": "OFqZSD1S",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 4.00mm nozzle",
+		"FELIX Food Double 4.00mm nozzle",
+		"FELIX Food Switch 4.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.05"
+	],
+	"filament_retraction_length": [
+		"1.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"2.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"6.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"432.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thick Stainless Steel Syringe @0.50mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "dJzDnkh8Kyn3phhF",
+	"filament_id": "OFjXHG0Z",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 0.50mm nozzle",
+		"FELIX Food Double 0.50mm nozzle",
+		"FELIX Food Switch 0.50mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.02"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"4.8"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thick Stainless Steel Syringe @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "QQi61sD4rX2jELMa",
+	"filament_id": "OFjXHG0Z",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.02"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"18.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thick Stainless Steel Syringe @2.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "KUmfC5HZL2hXPfey",
+	"filament_id": "OFjXHG0Z",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 2.00mm nozzle",
+		"FELIX Food Double 2.00mm nozzle",
+		"FELIX Food Switch 2.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.02"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"3.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"72.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thick Stainless Steel Syringe @3.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "0BbaSUre1bztrKB0",
+	"filament_id": "OFjXHG0Z",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 3.00mm nozzle",
+		"FELIX Food Double 3.00mm nozzle",
+		"FELIX Food Switch 3.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.02"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"4.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"144.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thick Stainless Steel Syringe @4.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "b179BTbFqjhnsHPT",
+	"filament_id": "OFjXHG0Z",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 4.00mm nozzle",
+		"FELIX Food Double 4.00mm nozzle",
+		"FELIX Food Switch 4.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.02"
+	],
+	"filament_retraction_length": [
+		"2.0"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"4.0"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"6.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"288.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Plastic Syringe @0.50mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "dBTTG8HJRYb7GHqy",
+	"filament_id": "OF0kP94Y",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 0.50mm nozzle",
+		"FELIX Food Double 0.50mm nozzle",
+		"FELIX Food Switch 0.50mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.75"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.5"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"10.8"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Plastic Syringe @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "FITfR7iepAteWuno",
+	"filament_id": "OF0kP94Y",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.75"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.5"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"40.5"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Plastic Syringe @2.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "i2DZouQfWUnIm4R5",
+	"filament_id": "OF0kP94Y",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 2.00mm nozzle",
+		"FELIX Food Double 2.00mm nozzle",
+		"FELIX Food Switch 2.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.75"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.5"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"3.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"162.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Plastic Syringe @3.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "EzV8T0DVT0NRPa7P",
+	"filament_id": "OF0kP94Y",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 3.00mm nozzle",
+		"FELIX Food Double 3.00mm nozzle",
+		"FELIX Food Switch 3.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.75"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.5"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"4.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"324.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Plastic Syringe @4.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "Q6msqrC9TM0un5qw",
+	"filament_id": "OF0kP94Y",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 4.00mm nozzle",
+		"FELIX Food Double 4.00mm nozzle",
+		"FELIX Food Switch 4.00mm nozzle"
+	],
+	"filament_diameter": [
+		"31.22"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.75"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"5.0"
+	],
+	"filament_deretraction_speed": [
+		"5.0"
+	],
+	"filament_retract_length_toolchange": [
+		"1.5"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"6.0"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"648.0"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Stainless Steel Syringe @0.50mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "I9W6tiEnRSMrkyzl",
+	"filament_id": "OF40XIE8",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 0.50mm nozzle",
+		"FELIX Food Double 0.50mm nozzle",
+		"FELIX Food Switch 0.50mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.2"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.4"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"0.75"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"10.8"
+	]
+}
@@ -0,0 +1,47 @@
+{
+	"type": "filament",
+	"name": "Food Thin Stainless Steel Syringe @1.00mm",
+	"inherits": "fdm_filament_food",
+	"from": "system",
+	"setting_id": "PJpJ8TTlDajNrRJo",
+	"filament_id": "OF40XIE8",
+	"instantiation": "true",
+	"compatible_printers": [
+		"FELIX Food Single 1.00mm nozzle",
+		"FELIX Food Double 1.00mm nozzle",
+		"FELIX Food Switch 1.00mm nozzle"
+	],
+	"filament_diameter": [
+		"25.4"
+	],
+	"filament_flow_ratio": [
+		"1.1"
+	],
+	"filament_retraction_length": [
+		"0.2"
+	],
+	"filament_retract_restart_extra": [
+		"0.0"
+	],
+	"filament_retraction_speed": [
+		"10.0"
+	],
+	"filament_deretraction_speed": [
+		"10.0"
+	],
+	"filament_retract_length_toolchange": [
+		"0.4"
+	],
+	"filament_retract_restart_extra_toolchange": [
+		"0.0"
+	],
+	"filament_wipe_distance": [
+		"1.5"
+	],
+	"filament_vendor": [
+		"FELIX Printers"
+	],
+	"filament_max_volumetric_speed": [
+		"40.5"
+	]
+}
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
ExPikaPaka	4bc300933e	Texture displacement: keep a tooltip on screen long enough to be seen A tooltip appeared only on the next pixel of mouse movement after its wait had finished. ImGui hides a window on the first frame it is submitted, to measure it before showing it, and does so every time a tooltip reappears because those windows are recycled (the Popup\|Tooltip branch of Begin()). So the frame a tooltip is decided on is never the frame it is seen on, and one carrying no animation asked for nothing further - leaving it in its hidden measuring frame until some other event happened to produce the next one. Before the hover delay this never showed, because the tooltip was submitted on every mouse-move frame and the movement supplied the second. It now asks for frames until it has been drawn twice in a row.	2026-10-13 14:30:53 +02:00
ExPikaPaka	5cfd91a309	Texture displacement: no tooltip while a control is being used, and a wait that finishes on its own The hover delay only finished while the mouse was moving: a pointer resting on a control produces no events, so nothing redrew the canvas and the wait never reached its end - the tooltip appeared on the next pixel of movement instead. It asked for its frames with schedule_extra_frame(), which only arranges a timer whose event an idle event is assumed to follow, and on_idle renders nothing unless the canvas was already dirty when it ran. The wait and the animations now both use request_extra_frame(), which ends on_idle with evt.RequestMore() and so obliges wx to deliver the next idle; it is what 3DBed's fade uses. Asking for frames as fast as they come is safe now that which frame is drawn comes from the clock rather than from the frame count - a redraw that arrives early draws the same frame again. Nothing explains a control while the control is being used, so no tooltip appears while a slider is being dragged, a value typed into one, a combo open or a layer card dragged. The pointer sits on the very thing being edited, so a tooltip there covered the model exactly while the user was watching it change. The full wait comes back afterwards rather than the short one: having just let go of a slider is not a reason to be shown a picture of it. AnimatedTexture::texture_id() loses its time-to-next-frame out-parameter, which nothing asks for any more.	2026-10-13 14:21:55 +02:00
ExPikaPaka	db0e788d35	Texture displacement: tooltip timing on a real clock, and a hover delay The animations crawled when left alone and raced while the mouse moved. They were timed by ImGui::GetTime(), and nothing in OrcaSlicer ever sets io.DeltaTime, so it keeps imgui's default of 1/60 per frame: imgui's clock counts frames, not seconds. On a canvas that renders only when something asks it to, that is not a clock. Playback now reads a steady_clock, so a frame is due when it is due whatever the canvas is doing. An animation also restarts when its tooltip opens again, not only when a different one opens: a gap in the frames it was drawn on is what that looks like from here. Tooltips now wait for the pointer to rest on a control for 0.45 s. The panel is dense and a tooltip lands on the model beside it, so with no wait a sweep from the top of the panel down to Bake flashed a dozen large panels over the scene. After one has just been up the wait drops to 0.1 s for 0.7 s, so reading several settings in a row stays quick - but not to zero, or that same sweep would flash again once one tooltip had been seen. A pointer resting on a control produces no events, so the wait asks for the frame it will appear on itself.	2026-10-13 13:58:52 +02:00
ExPikaPaka	d2ba88c93d	Texture displacement: animations that play on their own, and art for the rest of the panel The animations advanced one frame per mouse movement and stood still whenever the mouse did. schedule_extra_frame() only guarantees an idle event at the moment the next frame is due; GLCanvas3D::on_idle() returns without rendering anything unless something marked the canvas dirty by then, and nothing had. set_dirty() on the gizmo is what on_idle reads, through GLGizmoBase::update_items_state(), to find out there are frames still to draw. Thirty-odd more pictures, covering the paint tools, brush size, the connected-area fill, the five views, the five projections, subdivision, feature-adaptive refinement, remeshing, hard edges, slivers, geometry smoothing, filament mixing and denoise. The generator grew three more drawing languages beside the shaded relief, each picked by what the setting is rather than by taste: a flat mesh of triangles where the subject is the mesh or a tool, a section where the subject is where the surface sits relative to where it was, and a flat ramp of greys where the subject is which filament a spot ends up as. Lighting a colour illustration or looking down on a vertical change would both add a second thing moving between two pictures meant to differ in one. Mapping is one ball with the checker laid on it five ways, which is the whole of what choosing a projection does - except Unwrap, which is not a projection onto the model and so is drawn as the flat layout it produces.	2026-10-13 13:53:06 +02:00
ExPikaPaka	fc5ac6d2a5	Texture displacement: illustrate the settings that are a shape Ten more tooltips get a picture: Depth, Tile size, Repeat/Mirror, Invert, Smoothing, Edge fade and Blend as stills, Depth, Rotation and Midlevel as animations. All drawn by scripts/gen_texture_displacement_tips.py from the same arithmetic the feature uses, one motif throughout, so that whatever differs between two of them is the setting and nothing else. Midlevel is drawn in section instead of as a relief. Shading reads slopes, so a height field moved up or down as a whole shades exactly as it did before - and where the relief sits relative to the surface is the entire meaning of that setting. From the side, against the bare surface, it is the one thing visible. A single picture is now capped at 10 em tall and centred in its column, rather than drawn at the tooltip's full width, where a square one came out as tall as the text beside it was long.	2026-10-13 13:33:05 +02:00
ExPikaPaka	64ddc1fbba	Texture displacement: tooltips beside the panel, with illustrations The panel is pinned to the right edge of the canvas, so a tooltip left to follow the mouse covers the very control it explains. panel_tooltip() places every tooltip in the gizmo to the left of the panel instead - or of the texture picker, while a tooltip is coming from inside that popup - the same placement the picker itself already uses. A tooltip can now carry pictures under its text: stills, or GIFs that loop while it is open. Several settings in this panel describe a shape rather than a number, and a sentence about a shape is read twice and understood once. Files live in resources/images/texture_displacement and are named by a tooltip; one that is missing is skipped, so a tooltip without its art yet is exactly the text tooltip it was before. AnimatedTexture decodes a file once and uploads a GL texture per frame - wxImage for stills, wxGIFDecoder for GIFs, whose frames are composited here with the disposal method each one asks for. An animation restarts when its tooltip opens and asks the canvas for a redraw timed to its next frame. Tile and Rotation are wired up as the first two; scripts/ gen_texture_displacement_tips.py draws their relief from the same arithmetic the feature uses. docs/HLSD/tooltip-illustrations.md covers the rest.	2026-10-13 13:21:17 +02:00
SoftFever	d2675f15d1	Fix Qidi start G-code ignoring the selected plate type (#16372 ) # Description With "Support multi bed types" enabled on a Qidi printer, the first-layer bed temperature was always taken from the Smooth PEI / High Temp Plate setting, whichever plate type was selected. The slicer computes the right value (`first_layer_bed_temperature` in the G-code footer follows the selected plate), but the machine start G-code of these presets hardcoded `[hot_plate_temp_initial_layer]`: - `fdm_qidi_x3_common` (base of X-Max 3, X-Plus 3, X-Smart 3, X-Plus 4, Q1 Pro) - `Qidi Q1 Pro 0.4 nozzle` - `Qidi X-CF Pro 0.4 nozzle` They now use `[bed_temperature_initial_layer_single]`, which follows the selected plate type, as most other profiles do. The Qidi bundle version is bumped to `02.04.00.17`. With "Support multi bed types" disabled, these printers use the default plate (Smooth PEI / High Temp Plate), so the temperature is unchanged there. # Screenshots/Recordings/Graphs N/A — profile change only. ## Tests `python3 scripts/orca_profile_tool.py check` passes. Sliced on Qidi X-Max 3 0.4 nozzle with "Support multi bed types" enabled, `0.20mm Standard @Qidi XMax3`, `Generic PLA @Qidi`, with a different bed temperature set for each plate type (first layer / other layers). Before, with first layer set to 50–55 °C: `M190 S54` for every plate type. After, a two-layer print: \| Plate type \| Set (first / other) \| `M190` at start \| `M140` at layer 2 \| \| --- \| --- \| --- \| --- \| \| Cool Plate SuperTack \| 51 / 61 \| 51 \| 61 \| \| Cool Plate \| 52 / 62 \| 52 \| 62 \| \| Textured Cool Plate \| 53 / 63 \| 53 \| 63 \| \| Engineering Plate \| 54 / 64 \| 54 \| 64 \| \| Smooth PEI / High Temp Plate \| 55 / 65 \| 55 \| 65 \| \| Textured PEI Plate \| 56 / 66 \| 56 \| 66 \| 🤖 Generated with [Claude Code](https://claude.com/claude-code)4	2026-10-12 17:14:22 +08:00
HanifKoh	5371c85362	Refresh Dark Mode Colours When the System Theme Differs at Startup (#16390 ) On Linux and macOS the app follows the system theme: at startup it overwrites the saved dark_color_mode with the system appearance. The label colours and the cached dark mode flag were already set from the saved value by then, and the later "changed" check reads the mode only after the overwrite, so it never fires. For that session every dialog that maps its colours through UpdateDlgDarkUI keeps the old mode, e.g. white dialogs on a dark main window after switching the desktop to dark, or on a fresh install on a dark desktop. Refresh the label colours and the flag when the system theme differs from the saved mode.	2026-10-12 17:09:05 +08:00
SoftFever	a243941b72	Add favorite filaments to AMS filament dropdown (#13946 ) # Description ## Summary: Adds favorite filament support to the AMS material selection dropdown. Users can now click a star icon next to a selectable filament in the AMS Materials Setting dialog to mark it as a favorite. Favorited filaments appear in a new `Favorite filaments` section at the top of the dropdown, while all compatible filaments remain available in the `All filaments` section. This PR also adds generic right-side action icon support to Orca's custom dropdown widget: - Adds optional action icons to `DropDown::Item`. - Adds a new `EVT_DROPDOWN_ITEM_ACTION` event for clicks on the action icon. - Relays the action event through `ComboBox`. - Adds `ComboBox::RefreshDropdownIfOpen()` so callers can refresh an already-open dropdown without changing normal `ForceDropdownOpen()` behavior. The AMS favorites implementation: - Uses existing bundled star assets: - `score_star_dark` for non-favorited filaments - `score_star_light` for favorited filaments - Stores favorite filament IDs in app config under `ams_favorite_filament_ids`. - Stores stable filament IDs instead of display names - Uses existing C-style string escaping helpers for persistence. - Keeps Bambu/RFID/read-only slot behavior unchanged No new external dependencies. Note: `AMSMaterialsSetting` now uses Orca's custom `ComboBox` on macOS as well, because the favorite-star UI depends on the custom `DropDown` item renderer. I was able to test this on Windows, but macOS/Linux smoke testing is still needed and would be appreciated. # Screenshots/Recordings: https://github.com/user-attachments/assets/41e881be-d4de-4a7d-8f99-4297567adef2 <img width="494" height="36" alt="Screenshot 2026-05-30 103432" src="https://github.com/user-attachments/assets/e7c34ed3-db7a-4705-a1cd-4bfe7ac1616a" /> ## Tests Tested on Windows: - Built OrcaSlicer locally - Opened the Device tab with Bambu Lab printer with AMS - Opened the AMS Materials Setting dialog from an editable AMS slot - Confirmed clicking a star toggles favorite state. - Star clicks do not select the filament row. - Dropdown remains open after toggling a favorite. - Confirmed favorited filaments appear under `Favorite filaments`. - All compatible filaments remain visible under `All filaments`. - Confirmed Filament still selected as before - Confirmed favorites persist after closing and reopening the dialog. - Confirmed favorites persist after restarting OrcaSlicer. - Confirmed the favorite IDs are saved in `OrcaSlicer.conf` under `ams_favorite_filament_ids`. - Bambu/RFID/read-only filament slots continue using the existing read-only display behavior. Not tested: - macOS - Linux/Wayland These should be tested, `ComboBox` behavior not tested on macOS. [How to Download Pull Requests Artifacts for Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)	2026-10-12 16:37:29 +08:00
SoftFever	6a1a5d51e9	Show an outline star for filaments that are not favorites	2026-10-12 16:03:49 +08:00
HanifKoh	e625845b34	Keep Snapshot Suppression for the Whole Object List Edit (#16388 ) Five Plater::TakeSnapshot guards in GUI_ObjectList were unnamed temporaries, so snapshots were allowed again as soon as the snapshot was taken. Naming them keeps the suppression until the edit is done, as everywhere else.	2026-10-12 16:02:43 +08:00
SoftFever	01b340dee1	Fix regressions in the AMS filament favorites dropdown	2026-10-12 14:54:17 +08:00
HanifKoh	4c2a63e11e	Copy Plate Pick and Pattern File Paths When Loading a G-code 3MF (#16387 ) The importer assigned pick_file.empty() and pattern_bbox_file.empty(), a bool, to the string fields, storing a one-character string instead of the path.	2026-10-12 14:14:28 +08:00
HanifKoh	f8cf34c55b	Reset the Fan Mover Instead of Releasing It (#16386 ) Clearing per-export state called unique_ptr::release(), which gives up ownership without deleting. Every export uses a new GCode, so the pointer is still empty there today and nothing leaks; reset() states the intent and would free the object if a GCode were ever reused.	2026-10-12 13:42:19 +08:00
SoftFever	d007134001	fix: update translation for Assistant(HMS) in Chinese localization	2026-10-12 12:53:16 +08:00
SoftFever	00d11a7ba0	Merge branch 'main' into UI-changes	2026-10-12 12:17:21 +08:00
Šimon	70f518d87a	Added new profiles for the FELIX Printers vendor (#16314 ) * Added new profiles for the FELIX Printers vendor * fixed all errors from profiles	2026-10-12 10:02:56 +08:00
Boris SamorodovandClaude Opus 5.5	546b9c621d	Fix Qidi start G-code ignoring the selected plate type The start G-code of fdm_qidi_x3_common, Qidi Q1 Pro 0.4 nozzle and Qidi X-CF Pro 0.4 nozzle heated the bed to hot_plate_temp_initial_layer, so with "Support multi bed types" enabled every plate type got the Smooth PEI / High Temp Plate temperature. Use bed_temperature_initial_layer_single, which follows the selected plate. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-10-11 00:49:25 +02:00
SoftFever	a13089d357	Merge branch 'main' into UI-changes	2026-06-02 14:40:05 +08:00
KrishManan	fb6c93963d	Add AMS filament favorites	2026-05-30 17:45:03 +08:00
KrishManan	7688f7a16c	Add dropdown item action icons	2026-05-30 17:45:03 +08:00