Pick the Parity Build From the Unfiltered Run List and Allow Pinning One

The nightly found its build with a filtered run listing (branch=main,
status=success) and trusted the first result. GitHub serves filtered
listings from a run search index that has intermittently returned
weeks-old results, so some nights tested a build from weeks earlier and
reported its differences as regressions. The same filter also matched
fork PR builds whose branch is named main.

The build is now picked from the unfiltered listing, which stays
current, and filtered here: a successful build_all run of this
repository on the requested branch. Fork PR builds are excluded by
repository. A feature branch is normally built only for its PR, so this
repository's own PR builds stay eligible, but a PR build compiles the PR
merged into its base rather than the head commit the later jobs check
out, so a push or dispatch build of the branch is preferred when the same
page of the listing has one. A scheduled run fails instead of testing a
build more than 48 hours old, and every run names the build it tested
in the job summary.

Manual runs scan further back, so a branch that last built weeks ago
can still be tested, and a new build_run_id input pins one build_all
run, read directly rather than through a search.

.claude/skills/orca-profiles/references/naming.md

@@ -35,10 +35,9 @@ toolhead, a multi-material build) may drop the suffix — still an exact referen
 ## `process`
 
 `<layer height>mm <quality> @<target>` — [process-profiles.md](process-profiles.md#naming) has the
-quality ladder and the `fdm_process_*` base names. The quality label stays before `@` and the printer
-target after it: a printer model in the quality slot leaves the tier undescribed. The `@<target>` is a
-human label, not a reference: it usually does not equal a real variant, and compatibility comes from the
-resolved `compatible_printers` list or condition.
+quality ladder and the `fdm_process_*` base names. The `@<target>` is a human label, not a reference: it
+usually does not equal a real variant, and compatibility comes from the resolved `compatible_printers`
+list or condition.
 
 ## `filament`
 
@@ -59,30 +58,6 @@ to the first `@`; the target half is a label except for reserved forms:
   chosen at runtime
   ([color is a runtime property](filament-profiles.md#color-is-a-runtime-property)).
 
-## Checking names
-
-Check every newly added profile's `name` against its type and role: model, selectable preset or base.
-Apply the same checks to an intentional name change. The human-readable naming shapes are not enforced
-by `check`: inspect the added or renamed profiles in the diff, using neighbouring names as context and
-following the bundle's established style where the type-specific conventions allow variation.
-
-For bases (`instantiation: "false"`), use the type-specific conventions:
-
-| Type | Base names |
-| --- | --- |
-| `machine` | `fdm_machine_common`, `fdm_<vendor>_common`, or an established machine-family base name |
-| `process` | `fdm_process_*`, including shared roots and per-layer-height / per-nozzle bases such as `fdm_process_single_0.20` |
-| `filament` | `fdm_filament_*` material roots or `<Product> @base` product roots |
-
-Shared base names across bundles are intentional, including product roots such as `Fiberon PA6-CF @base`.
-Investigate a newly authored base that retains an unrelated selectable preset's name from a copy.
-
-**Name uniqueness is checked by CI.** `check_preset_name_uniqueness` checks type + name within each
-bundle. `check_machine_model_name_uniqueness` checks model names across the entire tree, even with
-`--vendor`: `Preset::get_printer_type` matches `printer_model` against all vendors' models and returns
-the first match, so a duplicate makes lookup depend on vendor order. Both run as part of
-`python3 scripts/orca_profile_tool.py check`.
-
 ## Not the same as the filename
 
 The loader keys off `name`, and a filename that disagrees usually still loads. Index `name` must equal the

.claude/skills/orca-profiles/references/review-checklist.md

@@ -17,7 +17,6 @@ The table highlights gaps that need human review. What CI *does* run:
 | A `renamed_from` whose old name is still a live preset | The redirect is inert while a live preset carries that name |
 | A preset differentiated only by color, or an all-printer library preset without `@System` | Per-color presets split one product across ids and the selector fills with near-duplicates; CI stays green |
 | Per-extruder vector length on a multi-nozzle printer | Silently padded (with the **first** value) or truncated |
-| A name that ignores its type's convention — a model in a `process` quality slot, or an unrelated target label left in a copied preset | The selector misrepresents the preset's quality or intended printer |
 
 ## 1. Was the vendor `version` bumped?
 
@@ -170,15 +169,6 @@ vendor, and a filename that disagrees with the preset's `name` (common; the load
 Check for Windows-invalid characters, reserved device names, trailing path-component spaces/dots,
 and case mismatches in `sub_path` or asset paths. See [cross-platform paths](validation.md#cross-platform-paths).
 
-## 16. Do the preset names follow the conventions?
-
-Check **every newly added profile and intentional name change**, including models and bases,
-against [the naming conventions](naming.md#checking-names). Preserve shipped names during
-ordinary tuning; renaming a shipped selectable preset requires the migration in item 4.
-
-*Why:* CI checks name uniqueness, but does not enforce the naming conventions. Catch naming
-mistakes before the names ship and existing projects depend on them.
-
 ---
 
 ## Reporting the review

.github/workflows/build_all.yml

@@ -413,14 +413,6 @@ jobs:
         GH_TOKEN: ${{ github.token }}
       run: |
         api="$GITHUB_API_URL/repos/$GITHUB_REPOSITORY/actions/caches"
-        # The save step reports success even when its tar failed, so keep
-        # the older entries unless the new one is listed.
-        if ! curl -sSf -H "Authorization: Bearer $GH_TOKEN" \
-            "$api?ref=$GITHUB_REF&key=$CCACHE_ENTRY" \
-            | jq -e --arg entry "$CCACHE_ENTRY" 'any(.actions_caches[]; .key == $entry)' > /dev/null; then
-          echo "$CCACHE_ENTRY was not saved; keeping the older entries."
-          exit 0
-        fi
         curl -sSf -H "Authorization: Bearer $GH_TOKEN" \
           "$api?ref=$GITHUB_REF&key=ccache-$CCACHE_LEG-&per_page=100" \
           | jq -r --arg prefix "ccache-$CCACHE_LEG-" --argjson run "$GITHUB_RUN_ID" \

.github/workflows/build_orca.yml

@@ -798,13 +798,6 @@ jobs:
         env:
           GH_TOKEN: ${{ github.token }}
         run: |
-          # The save step reports success even when its tar failed, so keep
-          # the older entries unless the new one is listed.
-          if ! gh cache list --ref "$GITHUB_REF" --key "$CCACHE_ENTRY" --json key \
-              | jq -e --arg entry "$CCACHE_ENTRY" 'any(.[]; .key == $entry)' > /dev/null; then
-            echo "$CCACHE_ENTRY was not saved; keeping the older entries."
-            exit 0
-          fi
           gh cache list --ref "$GITHUB_REF" --key "ccache-$CCACHE_LEG-" --limit 100 --json id,key \
             | jq -r --arg prefix "ccache-$CCACHE_LEG-" --argjson run "$GITHUB_RUN_ID" \
                 '.[] | select((.key | ltrimstr($prefix) | split("-")[0] | tonumber?) < $run) | .id' \

CMakeLists.txt

@@ -1122,6 +1122,7 @@ function(orcaslicer_copy_dlls target config postfix output_dlls)
         ${_out_dir}/swresample-5.dll
         ${_out_dir}/swscale-8.dll
         ${_out_dir}/avutil-59.dll
+        PARENT_SCOPE
     )
     list(APPEND _dll_list ${_occt_staged})
     set(${output_dlls} ${_dll_list} PARENT_SCOPE)

docs/HLSD/deferred-page-construction.md

@@ -1,220 +0,0 @@
-# Deferred Page Construction: High Level Design
-
-## Why it exists
-
-The main window is a notebook of tabs. When the first frame appears, one tab is on
-screen and the others are not; some of them are opened later in the session, some
-never, and some only exist for certain printers. Building a tab before the first frame
-adds its cost to every startup, whether or not the tab is used.
-
-This subsystem builds a tab's panel the first time the tab is shown. It also builds the
-remaining tabs while the user is idle after startup, in units of tens of milliseconds,
-so a click that lands in the middle of one waits for that unit and no longer. Startup
-pays only for what the first frame shows, and the other tabs are usually built before
-anyone opens them.
-
-## The parts
-
-`src/slic3r/GUI/Lazy.hpp`, `LazyPage.hpp`, `StagedBuild.hpp` and `IdleScheduler.hpp/.cpp`
-(with its wx-free `PrebuildQueue.hpp`) are independent. A holder can hold anything a
-factory makes, a page is a holder with a placeholder widget, a staged object can live
-outside a holder, and the scheduler knows none of them; it runs tasks, which `MainFrame`
-makes from the holders.
-
-### Lazy<T>: the holder
-
-Holds an object that a factory makes on first use, under a name for the log and a place
-in the idle queue, both given by the owner. The header has no wx dependency; the busy
-cursor for an on-demand build lives in `Lazy.cpp` and is skipped when there is no app,
-so the holder is unit-tested.
-
-- `get()` is null until the object is completely built; `built()` says the same.
-- `ensure()` builds whatever is left now, under a busy cursor, and returns the object, or
-  null in the two cases below. A click on an unbuilt tab or a first open of a dialog goes
-  through this, and it logs the units and time it took.
-- `build_step()` runs one unit of construction and returns true while more remain. The
-  first unit is the factory call, and each later unit is one `StagedBuild` step if the
-  type has them.
-- `when_built(fn)` runs `fn(object)` now if it exists, otherwise once it is built.
-- `pending()` says whether the idle prebuild has work here: not built, and the factory
-  has not returned null. A null factory result is logged and the holder stays unbuilt.
-- A unit that pumps the event loop cannot re-enter the holder; a nested `build_step()`
-  does nothing and a nested `ensure()` returns null.
-- After a unit throws, the holder and the scheduler still run the next one.
-
-The holder does not own the object; its wx parent does, as for any window. A type with
-one instance in the app derives from `LazyInstance<T>`, which points at that instance's
-holder (the holder registers itself, and a recreated `MainFrame`'s holder replaces the
-old frame's) and gives the type the static entry points the rest of the app uses,
-`T::if_built()`, `T::ensure()` and `T::when_built(fn)`. They return null, or do
-nothing, while no holder exists, so a caller needs no `mainframe` check.
-
-`built()` is an atomic flag, since a job worker reads it through the statics
-(`MainFrame::get_calibration_curr_tab()`); it is set after the object is complete.
-
-`LazyBase` is the holder's type-free interface (`name()`, `built()`, `pending()`,
-`build_step()`, `prebuild_order()`) and is what the scheduler side sees.
-
-### LazyPage<Panel>: the placeholder
-
-A `wxPanel` placed in the parent in place of the real panel, and a `Lazy<Panel>` whose
-factory makes the panel inside it (by default `new Panel(parent)`). The notebook needs a
-page object for the tab to exist and for `show_device()` to insert and remove tabs by
-pointer, and the placeholder is that object. `MainFrame` creates every page once, named
-after its `TAB_ID_*`, and keeps it for the frame's life; `show_device()` only moves
-pages in and out of the book.
-
-- `Show()` is forwarded to the panel, so a panel's own `Show()` override stays its
-  activation hook (refresh timers, machine sync) and `SelectPageByName()` works
-  unchanged. A show builds the panel unless the frame itself is still hidden, because
-  the book selects its first page as it is inserted; `MainFrame::Show()` shows the
-  current page again when the frame becomes visible, which builds it.
-- `in_book()` says whether the parent notebook currently lists the page, and
-  `pending()` is that and not built, so a tab `show_device()` has taken out of the book
-  is not prebuilt.
-- A panel built while its page is hidden stays hidden, and a completed panel gets the
-  dark-mode pass the frame ran before it existed.
-
-The Compare presets dialog is a holder without a page. `MainFrame` keeps a
-`Lazy<DiffPresetDialog>` whose factory constructs the dialog and binds its events, the
-dialog derives from `LazyInstance`, and its callers use
-`DiffPresetDialog::ensure()->show()` and `DiffPresetDialog::if_built()` like a tab's
-callers do. Saving a preset refreshes the dialog only while it is shown, since `show()`
-reloads the presets.
-
-### StagedBuild: construction in units
-
-A mixin for a panel whose constructor is too big to be one unit. The constructor builds
-the skeleton (sizers, and the parts other code may touch) and queues the rest with
-`add_build_step()`. `build_step()` runs one step, and `add_build_steps_of(child)`
-forwards a child's steps so a nested panel is spread the same way; the parent is built
-only once the child is, including steps the child queues later. Steps run in order, on
-the main thread. A `Lazy<T>` recognises a staged type at compile time and runs its steps
-one per unit.
-
-Nothing may touch what a step builds before the last step has run. In practice:
-
-- nothing paints the panel before it is complete, since a panel built at idle is hidden
-  with its page and one built on demand finishes inside `ensure()` before the event loop
-  runs again;
-- members created in steps are initialised to null in the header, so a partially built
-  panel can be destroyed;
-- timers and event handlers that use step content check `built()` first
-  (`MonitorPanel::update_all()`, `CalibrationPanel::update_all()`), and a child's steps
-  are queued before anything in the constructor can fire such a handler;
-- a destructor that disconnects from step content checks `built()` first;
-- a constructor or step does not take focus while the panel is off screen
-  (`IsShownOnScreen()` before `SetFocus()`), since it may run while the user is typing
-  elsewhere;
-- where a step's widgets must keep their place in a sizer that later steps also fill, the
-  constructor adds an empty slot sizer in that position and the step fills the slot
-  (`StatusBasePanel`).
-
-### IdleScheduler: when to build
-
-A task is any `LazyBase`: a name for the log, `pending()`, `build_step()` and
-`prebuild_order()`. `PrebuildQueue` holds the tasks by order (equal order in the order
-added) and runs a slice, the units of the first pending task until it completes, the
-budget is spent on the clock it is given, or the interrupt predicate says input arrived.
-It has no wx dependency and is unit-tested with a fake clock. A task whose work is gone
-is passed over and stays in the queue, so a tab that `show_device()` removes and later
-re-inserts is pending again.
-
-`IdleScheduler` drives the queue with the real clock, the app's input timestamp and the
-Windows queue check, and logs each unit and slice. Each slice is a timer message: a
-period of 250 ms while waiting for the user to go quiet, and a one-shot of zero after a
-slice that left work, so the event loop dispatches whatever it has queued (paint,
-timers, input) before the next slice runs. Chaining slices with `CallAfter` would not do
-this: wx drains pending events fully before the next native message, on every platform.
-On GTK the one-shot is 5 ms, because a due GLib timeout runs ahead of the redraw and
-idle sources that paint and deliver posted events.
-A slice runs only once the user has been idle for the quiet time, and the timer stops
-itself once no task is pending. The tick period, quiet time and slice length are
-constants in `IdleScheduler.cpp`. A unit cannot be interrupted once started, so the
-largest unit bounds click latency on Windows; on the other platforms a click also waits
-for the rest of the slice. A unit that pumps the event loop lets the timer fire inside
-its own slice, and that tick does nothing.
-
-The tasks are made by their owners. `MainFrame::prebuild_pages_when_idle()` registers
-every `LazyPage` the frame created, in or out of the book (`pending()` is false for a
-page out of the book), the Compare presets holder, and the Prepare sidebar's settings
-page from `ParamsPanel::settings_page_prebuild()`, whose first unit selects the default
-tab if none is selected yet and whose later units build one option group each.
-`show_device()` only restarts the timer. `MainFrame` owns the scheduler because it owns
-everything the tasks build, and clearing the queue with the frame is what keeps a task
-from outliving its object.
-
-Idle time comes from `GUI_App::FilterEvent`, which timestamps mouse and keyboard events
-(`wxEVT_CATEGORY_USER_INPUT` minus command events, which all claim that category), and
-`GUI_App::input_idle_ms()` reports it. On Windows a slice additionally refuses to start
-when the message queue holds keyboard, button, touch or pen input. Mouse moves are
-excluded because Windows synthesises one whenever a window appears under the cursor,
-which every unit does. Other platforms use the timestamp alone.
-
-Once every registered page is built the timer is stopped and the subsystem costs
-nothing.
-
-## Rules
-
-**What builds before the first frame.** The Prepare tab's plater, because `post_init()`
-needs its GL canvas on screen to initialise OpenGL in every startup state, and the start
-page the user configured. Home is built by the first `MainFrame::Show()`, Prepare's
-settings page by selecting the tab. `post_init()` passes through the Prepare tab for GL
-init under `Freeze()` with `MainFrame::select_prepare_for_gl_init()`, which changes the
-selection without the page-changed event, so nothing else is built for that pass.
-
-**Reaching a lazy object.** A caller uses the type's own statics. `T::if_built()` may
-return null and is for telling the object something it can live without (a rescale, a
-colour change, a status update). `T::ensure()` builds the object and is for navigating
-to it or for a caller that is about to show it. A caller that tells the object something
-it would not fetch for itself on construction uses `T::when_built()`, which keeps the
-message until the object exists. A panel that pulls its state when constructed (the Home
-page requests the recent list on load, the Device tab reads the device manager on show)
-is reached with `if_built()`; one that cannot pull gets `when_built()`.
-
-**Unit size.** A unit cannot be interrupted, so it should stay within the slice length on
-a fast machine. A constructor above that is staged. A single widget above it is the
-floor unless the widget itself is split.
-
-**Order.** Cheapest and most likely to be opened first, given where `MainFrame` creates
-each holder. The settings page is 0 (the Prepare tab's own content), Home 10, Device 20
-(a Bambu user's usual second stop), Calibration 30, Multi-device 40, the web Device
-view 50, Project 60 (a second WebView2 instance) and the Compare presets dialog 100;
-steps of ten so a new tab takes a value between its neighbours without renumbering
-them. `MainFrame::prebuild_pages_when_idle()` registers the tasks once, from
-`post_init()`.
-
-**Never prebuilt.** A holder with a negative order, for a tab that few sessions open
-and that costs more to build unasked than it saves (the Design tab), and plugin-provided
-tabs, which are Python-side and not lazy pages.
-
-## Adopting it
-
-A lazy tab needs:
-
-1. The panel derived from `LazyInstance<Panel>`, since a tab's panel has one instance.
-2. A `LazyPage<Panel>*` member in `MainFrame`, created once in `init_tabpanel()` with
-   its `TAB_ID_*` as the name, its place by the order rule (and a factory if
-   `new Panel(parent)` is not enough), added to `m_lazy_pages`, and used wherever the
-   tab is added to or looked up in the notebook.
-3. Every use of the panel outside `MainFrame` going through one of the panel's statics,
-   chosen by the rule above. When converting an existing member, `grep` for it; the
-   compiler finds the rest.
-4. A constructor that copes with the frame already existing and the user being busy
-   elsewhere, since `wxGetApp().mainframe` is set, the frame may be shown, and the user
-   may be typing when a lazy panel is built: no `SetFocus()` while off screen, and
-   whatever the constructor did through a `MainFrame` accessor before (a mode update, a
-   deferred URL) done in the constructor itself.
-
-To stage a heavy constructor, inherit `StagedBuild`, keep the skeleton in the constructor,
-move the rest into `add_build_step()` lambdas in the original order, and follow the
-staged-panel rules above. Measure the units. A step that is still one big widget has to
-be split inside that widget or accepted as the floor.
-
-Verification is by log. `MainFrame::prebuild_pages_when_idle` lists the queue it
-registered, `IdleScheduler::tick` reports each completed task by name at info level and
-each slice and unit at debug level, and `Lazy::ensure` reports an object a user built
-on demand with the units and time it took. A run from the configured start
-page shows every registered page complete, in order, with no unit longer than intended.
-A click on a tab mid-prebuild shows the finished panel with an `ensure` line for what was
-left, and the slices resume for the remaining tasks once the user is idle again.

localization/i18n/OrcaSlicer.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 17:02+0800\n"
+"POT-Creation-Date: 2026-09-22 12:39+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -6161,6 +6161,9 @@ msgstr ""
 msgid "Preferences"
 msgstr ""
 
+msgid "Open speed dial"
+msgstr ""
+
 msgctxt "Menu"
 msgid "Edit"
 msgstr ""
@@ -6168,9 +6171,6 @@ msgstr ""
 msgid "View"
 msgstr ""
 
-msgid "Open Speed Dial"
-msgstr ""
-
 msgid "Preset Bundle"
 msgstr ""
 

localization/i18n/ca/OrcaSlicer_ca.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 17:02+0800\n"
+"POT-Creation-Date: 2026-09-22 12:39+0800\n"
 "PO-Revision-Date: 2025-03-15 10:55+0100\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -6637,6 +6637,9 @@ msgstr "Mostrar el contorn al voltant de l'objecte seleccionat a l'escena 3D"
 msgid "Preferences"
 msgstr "Preferències"
 
+msgid "Open speed dial"
+msgstr ""
+
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6645,9 +6648,6 @@ msgstr "Edita"
 msgid "View"
 msgstr "Vista"
 
-msgid "Open Speed Dial"
-msgstr ""
-
 # AI Translated
 msgid "Preset Bundle"
 msgstr "Paquet de perfils"

localization/i18n/cs/OrcaSlicer_cs.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 17:02+0800\n"
+"POT-Creation-Date: 2026-09-22 12:39+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Jakub Hencl\n"
 "Language-Team: \n"
@@ -6602,6 +6602,9 @@ msgstr "Zobrazit obrys kolem vybraného objektu ve 3D scéně."
 msgid "Preferences"
 msgstr "Předvolby"
 
+msgid "Open speed dial"
+msgstr ""
+
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6610,9 +6613,6 @@ msgstr "Upravit"
 msgid "View"
 msgstr "Zobrazit"
 
-msgid "Open Speed Dial"
-msgstr ""
-
 msgid "Preset Bundle"
 msgstr "Balík předvoleb"
 

localization/i18n/de/OrcaSlicer_de.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 17:02+0800\n"
+"POT-Creation-Date: 2026-09-22 12:39+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Heiko Liebscher <hliebschergmail.com>\n"
 "Language-Team: \n"
@@ -6490,6 +6490,9 @@ msgstr "Kontur um das ausgewählte Objekt in der 3D-Szene anzeigen."
 msgid "Preferences"
 msgstr "Einstellungen"
 
+msgid "Open speed dial"
+msgstr ""
+
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6498,9 +6501,6 @@ msgstr "Bearbeiten"
 msgid "View"
 msgstr "Ansicht"
 
-msgid "Open Speed Dial"
-msgstr ""
-
 msgid "Preset Bundle"
 msgstr "Vorlagen-Bundle"
 

localization/i18n/en/OrcaSlicer_en.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 17:02+0800\n"
+"POT-Creation-Date: 2026-09-22 12:39+0800\n"
 "PO-Revision-Date: 2026-06-17 15:44-0300\n"
 "Last-Translator: Alexandre Folle de Menezes\n"
 "Language-Team: \n"
@@ -6157,6 +6157,9 @@ msgstr ""
 msgid "Preferences"
 msgstr ""
 
+msgid "Open speed dial"
+msgstr ""
+
 msgctxt "Menu"
 msgid "Edit"
 msgstr ""
@@ -6164,9 +6167,6 @@ msgstr ""
 msgid "View"
 msgstr ""
 
-msgid "Open Speed Dial"
-msgstr ""
-
 msgid "Preset Bundle"
 msgstr ""
 

localization/i18n/es/OrcaSlicer_es.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 17:02+0800\n"
+"POT-Creation-Date: 2026-09-22 12:39+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Ian A. Bassi <>\n"
 "Language-Team: \n"
@@ -6346,6 +6346,9 @@ msgstr "Mostrar el contorno alrededor del objeto seleccionado en la escena 3D."
 msgid "Preferences"
 msgstr "Preferencias"
 
+msgid "Open speed dial"
+msgstr ""
+
 msgctxt "Menu"
 msgid "Edit"
 msgstr "Edición"
@@ -6353,9 +6356,6 @@ msgstr "Edición"
 msgid "View"
 msgstr "Vista"
 
-msgid "Open Speed Dial"
-msgstr ""
-
 msgid "Preset Bundle"
 msgstr "Paquete de perfiles"
 

localization/i18n/eu/OrcaSlicer_eu.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 17:02+0800\n"
+"POT-Creation-Date: 2026-09-22 12:39+0800\n"
 "PO-Revision-Date: 2026-07-20 13:33+0200\n"
 "Last-Translator: Manu Goiogana <mgoiogana@gmail.com>\n"
 "Language-Team: \n"
@@ -6392,6 +6392,9 @@ msgstr "Erakutsi hautatutako objektuaren inguruko ingerada 3D eszenan."
 msgid "Preferences"
 msgstr "Hobespenak"
 
+msgid "Open speed dial"
+msgstr ""
+
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6400,9 +6403,6 @@ msgstr "Editatu"
 msgid "View"
 msgstr "Bista"
 
-msgid "Open Speed Dial"
-msgstr ""
-
 msgid "Preset Bundle"
 msgstr "Aurrezarpen-paketea"
 

localization/i18n/fr/OrcaSlicer_fr.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 17:02+0800\n"
+"POT-Creation-Date: 2026-09-22 12:39+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: Guislain Cyril, Thomas Lété\n"
@@ -6439,6 +6439,9 @@ msgstr "Afficher le tracé contour de l’objet sélectionné dans la scène 3D.
 msgid "Preferences"
 msgstr "Préférences"
 
+msgid "Open speed dial"
+msgstr ""
+
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6447,9 +6450,6 @@ msgstr "Édition"
 msgid "View"
 msgstr "Affichage"
 
-msgid "Open Speed Dial"
-msgstr ""
-
 msgid "Preset Bundle"
 msgstr "Paquet de préréglages"
 

localization/i18n/hu/OrcaSlicer_hu.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 17:02+0800\n"
+"POT-Creation-Date: 2026-09-22 12:39+0800\n"
 "Language: hu\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -6541,6 +6541,9 @@ msgstr "Körvonal megjelenítése a kijelölt objektum körül a 3D nézetben."
 msgid "Preferences"
 msgstr "Beállítások"
 
+msgid "Open speed dial"
+msgstr ""
+
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6549,9 +6552,6 @@ msgstr "Szerkesztés"
 msgid "View"
 msgstr "Nézet"
 
-msgid "Open Speed Dial"
-msgstr ""
-
 msgid "Preset Bundle"
 msgstr "Beállításcsomag"
 

localization/i18n/it/OrcaSlicer_it.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 17:02+0800\n"
+"POT-Creation-Date: 2026-09-22 12:39+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -6543,6 +6543,9 @@ msgstr "Mostra il contorno attorno all'oggetto selezionato nella scena 3D."
 msgid "Preferences"
 msgstr "Preferenze"
 
+msgid "Open speed dial"
+msgstr ""
+
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6551,9 +6554,6 @@ msgstr "Modifica"
 msgid "View"
 msgstr "Vista"
 
-msgid "Open Speed Dial"
-msgstr ""
-
 msgid "Preset Bundle"
 msgstr "Pacchetto profili"
 

localization/i18n/ja/OrcaSlicer_ja.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 17:02+0800\n"
+"POT-Creation-Date: 2026-09-22 12:39+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -6553,6 +6553,9 @@ msgstr "3Dシーンで選択したオブジェクトの周りにアウトライ
 msgid "Preferences"
 msgstr "設定"
 
+msgid "Open speed dial"
+msgstr ""
+
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6561,9 +6564,6 @@ msgstr "編集"
 msgid "View"
 msgstr "表示"
 
-msgid "Open Speed Dial"
-msgstr ""
-
 # AI Translated
 msgid "Preset Bundle"
 msgstr "プリセットバンドル"

localization/i18n/ko/OrcaSlicer_ko.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 17:02+0800\n"
+"POT-Creation-Date: 2026-09-22 12:39+0800\n"
 "PO-Revision-Date: 2025-06-02 17:12+0900\n"
 "Last-Translator: crwusiz <crwusiz@gmail.com>\n"
 "Language-Team: \n"
@@ -6566,6 +6566,9 @@ msgstr "3D 장면에서 선택한 객체 주변에 윤곽선 표시"
 msgid "Preferences"
 msgstr "기본 설정"
 
+msgid "Open speed dial"
+msgstr ""
+
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6574,9 +6577,6 @@ msgstr "편집"
 msgid "View"
 msgstr "시점"
 
-msgid "Open Speed Dial"
-msgstr ""
-
 # AI Translated
 msgid "Preset Bundle"
 msgstr "사전 설정 번들"

localization/i18n/lt/OrcaSlicer_lt.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 17:02+0800\n"
+"POT-Creation-Date: 2026-09-22 12:39+0800\n"
 "PO-Revision-Date: 2026-07-02 14:13+0300\n"
 "Last-Translator: Gintaras Kučinskas <sharanchius@gmail.com>\n"
 "Language-Team: \n"
@@ -6528,6 +6528,9 @@ msgstr "Rodyti kontūrą aplink pasirinktą objektą 3D scenoje."
 msgid "Preferences"
 msgstr "Parinktys"
 
+msgid "Open speed dial"
+msgstr ""
+
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6536,9 +6539,6 @@ msgstr "Redaguoti"
 msgid "View"
 msgstr "Vaizdas"
 
-msgid "Open Speed Dial"
-msgstr ""
-
 msgid "Preset Bundle"
 msgstr "Profilių rinkinys"
 

localization/i18n/nl/OrcaSlicer_nl.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 17:02+0800\n"
+"POT-Creation-Date: 2026-09-22 12:39+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -7122,6 +7122,9 @@ msgstr "Toon een omtrek rond het geselecteerde object in de 3D-scène."
 msgid "Preferences"
 msgstr "Voorkeuren"
 
+msgid "Open speed dial"
+msgstr ""
+
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -7130,9 +7133,6 @@ msgstr "Bewerken"
 msgid "View"
 msgstr "Weergave"
 
-msgid "Open Speed Dial"
-msgstr ""
-
 # AI Translated
 msgid "Preset Bundle"
 msgstr "Voorinstellingenbundel"

localization/i18n/pl/OrcaSlicer_pl.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: OrcaSlicer 2.3.0-rc\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 17:02+0800\n"
+"POT-Creation-Date: 2026-09-22 12:39+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Krzysztof Morga <<tlumaczeniebs@gmail.com>>\n"
 "Language-Team: \n"
@@ -6689,6 +6689,9 @@ msgstr "Przełącza wyświetlanie konturu wokół zaznaczonego obiektu w scenie
 msgid "Preferences"
 msgstr "Preferencje"
 
+msgid "Open speed dial"
+msgstr ""
+
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6697,9 +6700,6 @@ msgstr "Edycja"
 msgid "View"
 msgstr "Widok"
 
-msgid "Open Speed Dial"
-msgstr ""
-
 # AI Translated
 msgid "Preset Bundle"
 msgstr "Pakiet profili"

localization/i18n/pt_BR/OrcaSlicer_pt_BR.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 17:02+0800\n"
+"POT-Creation-Date: 2026-09-22 12:39+0800\n"
 "PO-Revision-Date: 2026-07-26 11:14-0300\n"
 "Last-Translator: Alexandre Folle de Menezes\n"
 "Language-Team: Portuguese, Brazilian\n"
@@ -6363,6 +6363,9 @@ msgstr "Mostrar contorno ao redor do objeto selecionado na cena 3D."
 msgid "Preferences"
 msgstr "Preferências"
 
+msgid "Open speed dial"
+msgstr ""
+
 msgctxt "Menu"
 msgid "Edit"
 msgstr "Editar"
@@ -6370,9 +6373,6 @@ msgstr "Editar"
 msgid "View"
 msgstr "Visualizar"
 
-msgid "Open Speed Dial"
-msgstr ""
-
 msgid "Preset Bundle"
 msgstr "Pacote de Predefinições"
 

localization/i18n/ru/OrcaSlicer_ru.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: OrcaSlicer V2.5.0\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 17:02+0800\n"
+"POT-Creation-Date: 2026-09-22 12:39+0800\n"
 "PO-Revision-Date: 2026-02-25 13:38+0300\n"
 "Last-Translator: Felix14_v2\n"
 "Language-Team: Felix14_v2 (ДС/ТГ: @felix14_v2, почта: aleks111001@list.ru), Andylg <andylg@yandex.ru>\n"
@@ -6597,6 +6597,9 @@ msgstr "Отображение контура вокруг выбранных м
 msgid "Preferences"
 msgstr "Настройки"
 
+msgid "Open speed dial"
+msgstr ""
+
 msgctxt "Menu"
 msgid "Edit"
 msgstr "Правка"
@@ -6604,9 +6607,6 @@ msgstr "Правка"
 msgid "View"
 msgstr "Вид"
 
-msgid "Open Speed Dial"
-msgstr ""
-
 msgid "Preset Bundle"
 msgstr "Пакет профилей"
 

localization/i18n/sv/OrcaSlicer_sv.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 17:02+0800\n"
+"POT-Creation-Date: 2026-09-22 12:39+0800\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -7205,6 +7205,9 @@ msgstr "Visa en kontur runt det markerade objektet i 3D-scenen."
 msgid "Preferences"
 msgstr "Inställningar"
 
+msgid "Open speed dial"
+msgstr ""
+
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -7213,9 +7216,6 @@ msgstr "Redigera"
 msgid "View"
 msgstr "Vy"
 
-msgid "Open Speed Dial"
-msgstr ""
-
 # AI Translated
 msgid "Preset Bundle"
 msgstr "Förinställningspaket"

localization/i18n/th/OrcaSlicer_th.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 17:02+0800\n"
+"POT-Creation-Date: 2026-09-22 12:39+0800\n"
 "PO-Revision-Date: 2026-06-19 13:40+0700\n"
 "Last-Translator: Icezaza\n"
 "Language-Team: Thai\n"
@@ -6520,6 +6520,9 @@ msgstr "แสดงเค้าร่างรอบๆ วัตถุที
 msgid "Preferences"
 msgstr "การตั้งค่า"
 
+msgid "Open speed dial"
+msgstr ""
+
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6528,9 +6531,6 @@ msgstr "แก้ไข"
 msgid "View"
 msgstr "มุมมอง"
 
-msgid "Open Speed Dial"
-msgstr ""
-
 msgid "Preset Bundle"
 msgstr "ชุดที่ตั้งไว้ล่วงหน้า"
 

localization/i18n/tr/OrcaSlicer_tr.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 17:02+0800\n"
+"POT-Creation-Date: 2026-09-22 12:39+0800\n"
 "PO-Revision-Date: 2026-08-21 23:18+0300\n"
 "Last-Translator: GlauTech\n"
 "Language-Team: \n"
@@ -6588,6 +6588,9 @@ msgstr "3D sahnede seçilen nesnenin etrafındaki ana hatları göster."
 msgid "Preferences"
 msgstr "Tercihler"
 
+msgid "Open speed dial"
+msgstr ""
+
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6596,9 +6599,6 @@ msgstr "Düzen"
 msgid "View"
 msgstr "Görünüm"
 
-msgid "Open Speed Dial"
-msgstr ""
-
 msgid "Preset Bundle"
 msgstr "Ön ayar paketi"
 

localization/i18n/uk/OrcaSlicer_uk.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: orcaslicerua\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 17:02+0800\n"
+"POT-Creation-Date: 2026-09-22 12:39+0800\n"
 "PO-Revision-Date: 2026-07-17 16:25+0300\n"
 "Last-Translator: Andrij Mizyk <andm1zyk@proton.me>\n"
 "Language-Team: Ukrainian\n"
@@ -6557,6 +6557,9 @@ msgstr "Показувати контур навколо виділеного о
 msgid "Preferences"
 msgstr "Налаштування"
 
+msgid "Open speed dial"
+msgstr ""
+
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6565,9 +6568,6 @@ msgstr "Редагування"
 msgid "View"
 msgstr "Вигляд"
 
-msgid "Open Speed Dial"
-msgstr ""
-
 msgid "Preset Bundle"
 msgstr "Набір пресетів"
 

localization/i18n/vi/OrcaSlicer_vi.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 17:02+0800\n"
+"POT-Creation-Date: 2026-09-22 12:39+0800\n"
 "PO-Revision-Date: 2025-10-02 17:43+0700\n"
 "Last-Translator: \n"
 "Language-Team: hainguyen.ts13@gmail.com\n"
@@ -6907,6 +6907,9 @@ msgstr "Hiện đường viền xung quanh vật thể đã chọn trong cảnh
 msgid "Preferences"
 msgstr "Tùy chọn"
 
+msgid "Open speed dial"
+msgstr ""
+
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6915,9 +6918,6 @@ msgstr "Chỉnh sửa"
 msgid "View"
 msgstr "Xem"
 
-msgid "Open Speed Dial"
-msgstr ""
-
 # AI Translated
 msgid "Preset Bundle"
 msgstr "Gói cài đặt sẵn"

localization/i18n/zh_CN/OrcaSlicer_zh_CN.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 17:02+0800\n"
+"POT-Creation-Date: 2026-09-22 12:39+0800\n"
 "PO-Revision-Date: 2026-06-11 12:37-0300\n"
 "Last-Translator: Handle <mail@bysb.net>\n"
 "Language-Team: \n"
@@ -6375,6 +6375,9 @@ msgstr "在3D场景中显示选中对象的轮廓"
 msgid "Preferences"
 msgstr "偏好设置"
 
+msgid "Open speed dial"
+msgstr ""
+
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6383,9 +6386,6 @@ msgstr "编辑"
 msgid "View"
 msgstr "视图"
 
-msgid "Open Speed Dial"
-msgstr ""
-
 msgid "Preset Bundle"
 msgstr "预设包"
 

localization/i18n/zh_TW/OrcaSlicer_zh_TW.po

@@ -9,7 +9,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-09-22 17:02+0800\n"
+"POT-Creation-Date: 2026-09-22 12:39+0800\n"
 "PO-Revision-Date: 2025-11-28 13:48-0600\n"
 "Last-Translator: tntchn <15895303+tntchn@users.noreply.github.com>\n"
 "Language-Team: \n"
@@ -6505,6 +6505,9 @@ msgstr "在 3D 場景中顯示選定物件的輪廓"
 msgid "Preferences"
 msgstr "偏好設定"
 
+msgid "Open speed dial"
+msgstr ""
+
 # AI Translated
 msgctxt "Menu"
 msgid "Edit"
@@ -6513,9 +6516,6 @@ msgstr "編輯"
 msgid "View"
 msgstr "視角"
 
-msgid "Open Speed Dial"
-msgstr ""
-
 msgid "Preset Bundle"
 msgstr "設定檔組"
 

resources/profiles/Anker/machine/fdm_marlin_common.json

@@ -6,7 +6,6 @@
 	"instantiation": "false",
 	"gcode_flavor": "marlin2",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
-	"file_start_gcode": ";TIME:{print_time_sec}s",
 	"machine_start_gcode": "M4899 T3 ; Enable v3 jerk and S-curve acceleration \nM104 S150 ; Set hotend temp to 150 degrees to prevent ooze\nM190 S{first_layer_bed_temperature[0]} ; set and wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; set final nozzle temp to stabilize\nG28 ;Home\n;LAYER_COUNT:{total_layer_count}",
 	"machine_end_gcode": "M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM18",
 	"change_filament_gcode": "M600",

resources/profiles/Anycubic.json

@@ -1,6 +1,6 @@
 {
 	"name": "Anycubic",
-	"version": "02.04.00.07",
+	"version": "02.04.00.05",
 	"force_update": "0",
 	"description": "Anycubic configurations",
 	"machine_model_list": [
@@ -48,10 +48,6 @@
 			"name": "Anycubic Kobra 3 Max",
 			"sub_path": "machine/Anycubic Kobra 3 Max.json"
 		},
-		{
-			"name": "Anycubic Kobra 3 V2",
-			"sub_path": "machine/Anycubic Kobra 3 V2.json"
-		},
 		{
 			"name": "Anycubic Kobra Max",
 			"sub_path": "machine/Anycubic Kobra Max.json"
@@ -106,10 +102,6 @@
 			"name": "0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "process/0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
-		{
-			"name": "0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
-			"sub_path": "process/0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
-		},
 		{
 			"name": "0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
 			"sub_path": "process/0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json"
@@ -126,10 +118,6 @@
 			"name": "0.10mm Detail @Anycubic Kobra 3 0.2 nozzle",
 			"sub_path": "process/0.10mm Detail @Anycubic Kobra 3 0.2 nozzle.json"
 		},
-		{
-			"name": "0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle",
-			"sub_path": "process/0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle.json"
-		},
 		{
 			"name": "0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
 			"sub_path": "process/0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json"
@@ -154,10 +142,6 @@
 			"name": "0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "process/0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
-		{
-			"name": "0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
-			"sub_path": "process/0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
-		},
 		{
 			"name": "0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
 			"sub_path": "process/0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json"
@@ -230,10 +214,6 @@
 			"name": "0.16mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "process/0.16mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
-		{
-			"name": "0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
-			"sub_path": "process/0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
-		},
 		{
 			"name": "0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle",
 			"sub_path": "process/0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle.json"
@@ -306,10 +286,6 @@
 			"name": "0.20mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "process/0.20mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
-		{
-			"name": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
-			"sub_path": "process/0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
-		},
 		{
 			"name": "0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle",
 			"sub_path": "process/0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle.json"
@@ -366,10 +342,6 @@
 			"name": "0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "process/0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
-		{
-			"name": "0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
-			"sub_path": "process/0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
-		},
 		{
 			"name": "0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
 			"sub_path": "process/0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json"
@@ -398,10 +370,6 @@
 			"name": "0.28mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "process/0.28mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
-		{
-			"name": "0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
-			"sub_path": "process/0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
-		},
 		{
 			"name": "0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle",
 			"sub_path": "process/0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle.json"
@@ -458,10 +426,6 @@
 			"name": "0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle",
 			"sub_path": "process/0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json"
 		},
-		{
-			"name": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
-			"sub_path": "process/0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json"
-		},
 		{
 			"name": "0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
 			"sub_path": "process/0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json"
@@ -490,10 +454,6 @@
 			"name": "0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "process/0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
-		{
-			"name": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
-			"sub_path": "process/0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json"
-		},
 		{
 			"name": "0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
 			"sub_path": "process/0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json"
@@ -517,34 +477,6 @@
 		{
 			"name": "0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
 			"sub_path": "process/0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json"
-		},
-		{
-			"name": "0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
-			"sub_path": "process/0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json"
-		},
-		{
-			"name": "0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
-			"sub_path": "process/0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json"
-		},
-		{
-			"name": "0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
-			"sub_path": "process/0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json"
-		},
-		{
-			"name": "0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
-			"sub_path": "process/0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json"
-		},
-		{
-			"name": "0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
-			"sub_path": "process/0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json"
-		},
-		{
-			"name": "0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
-			"sub_path": "process/0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json"
-		},
-		{
-			"name": "0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
-			"sub_path": "process/0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json"
 		}
 	],
 	"filament_list": [
@@ -596,10 +528,6 @@
 			"name": "Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "filament/Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
-		{
-			"name": "Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle",
-			"sub_path": "filament/Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle.json"
-		},
 		{
 			"name": "Anycubic ABS @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic ABS @Anycubic Kobra S1 0.4 nozzle.json"
@@ -636,10 +564,6 @@
 			"name": "Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "filament/Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
-		{
-			"name": "Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle",
-			"sub_path": "filament/Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle.json"
-		},
 		{
 			"name": "Anycubic ASA @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic ASA @Anycubic Kobra S1 0.4 nozzle.json"
@@ -780,10 +704,6 @@
 			"name": "Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
-		{
-			"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle",
-			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle.json"
-		},
 		{
 			"name": "Anycubic PETG @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic PETG @Anycubic Kobra S1 0.4 nozzle.json"
@@ -848,22 +768,6 @@
 			"name": "Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
-		{
-			"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle",
-			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle.json"
-		},
-		{
-			"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle",
-			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle.json"
-		},
-		{
-			"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle",
-			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle.json"
-		},
-		{
-			"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle",
-			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle.json"
-		},
 		{
 			"name": "Anycubic PLA @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA @Anycubic Kobra S1 0.4 nozzle.json"
@@ -888,22 +792,6 @@
 			"name": "Anycubic PLA @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA @Anycubic Kobra X 0.4 nozzle.json"
 		},
-		{
-			"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle",
-			"sub_path": "filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle.json"
-		},
-		{
-			"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle",
-			"sub_path": "filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle.json"
-		},
-		{
-			"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle",
-			"sub_path": "filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle.json"
-		},
-		{
-			"name": "Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle",
-			"sub_path": "filament/Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle.json"
-		},
 		{
 			"name": "Anycubic PLA Glow @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Glow @Anycubic Kobra X 0.4 nozzle.json"
@@ -912,10 +800,6 @@
 			"name": "Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
-		{
-			"name": "Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle",
-			"sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle.json"
-		},
 		{
 			"name": "Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle.json"
@@ -940,26 +824,10 @@
 			"name": "Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
-		{
-			"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle",
-			"sub_path": "filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle.json"
-		},
-		{
-			"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle",
-			"sub_path": "filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle.json"
-		},
-		{
-			"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle",
-			"sub_path": "filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle.json"
-		},
 		{
 			"name": "Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
-		{
-			"name": "Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle",
-			"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle.json"
-		},
 		{
 			"name": "Anycubic PLA Matte @Anycubic Kobra S1 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra S1 Max 0.4 nozzle.json"
@@ -976,30 +844,10 @@
 			"name": "Anycubic PLA Matte @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra X 0.4 nozzle.json"
 		},
-		{
-			"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle",
-			"sub_path": "filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle.json"
-		},
-		{
-			"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle",
-			"sub_path": "filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle.json"
-		},
-		{
-			"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle",
-			"sub_path": "filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle.json"
-		},
-		{
-			"name": "Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle",
-			"sub_path": "filament/Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle.json"
-		},
 		{
 			"name": "Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
-		{
-			"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle",
-			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle.json"
-		},
 		{
 			"name": "Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle.json"
@@ -1020,10 +868,6 @@
 			"name": "Anycubic PLA Silk @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra X 0.4 nozzle.json"
 		},
-		{
-			"name": "Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle",
-			"sub_path": "filament/Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle.json"
-		},
 		{
 			"name": "Anycubic PLA Translucent @Anycubic Kobra S1 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Translucent @Anycubic Kobra S1 Max 0.4 nozzle.json"
@@ -1136,10 +980,6 @@
 			"name": "Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "filament/Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
-		{
-			"name": "Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle",
-			"sub_path": "filament/Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle.json"
-		},
 		{
 			"name": "Anycubic TPU @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic TPU @Anycubic Kobra S1 0.4 nozzle.json"
@@ -1176,22 +1016,6 @@
 			"name": "Anycubic PETG @Anycubic Kobra 3 0.4 nozzle",
 			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 0.4 nozzle.json"
 		},
-		{
-			"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle",
-			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle.json"
-		},
-		{
-			"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle",
-			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle.json"
-		},
-		{
-			"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle",
-			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle.json"
-		},
-		{
-			"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle",
-			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle.json"
-		},
 		{
 			"name": "Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle.json"
@@ -1350,22 +1174,6 @@
 			"name": "Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "machine/Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
-		{
-			"name": "Anycubic Kobra 3 V2 0.2 nozzle",
-			"sub_path": "machine/Anycubic Kobra 3 V2 0.2 nozzle.json"
-		},
-		{
-			"name": "Anycubic Kobra 3 V2 0.4 nozzle",
-			"sub_path": "machine/Anycubic Kobra 3 V2 0.4 nozzle.json"
-		},
-		{
-			"name": "Anycubic Kobra 3 V2 0.6 nozzle",
-			"sub_path": "machine/Anycubic Kobra 3 V2 0.6 nozzle.json"
-		},
-		{
-			"name": "Anycubic Kobra 3 V2 0.8 nozzle",
-			"sub_path": "machine/Anycubic Kobra 3 V2 0.8 nozzle.json"
-		},
 		{
 			"name": "Anycubic Kobra Max 0.4 nozzle",
 			"sub_path": "machine/Anycubic Kobra Max 0.4 nozzle.json"

resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -1,255 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle",
-	"inherits": "fdm_filament_abs",
-	"from": "system",
-	"setting_id": "LXkKhWH9YcYPr3IT",
-	"filament_id": "OF223rZv",
-	"instantiation": "true",
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_settings_id": [
-		"Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"filament_type": [
-		"ABS"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"5"
-	],
-	"nozzle_temperature": [
-		"250"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"bed_type": [
-		"High Temp Plate"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"5"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"80"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"during_print_exhaust_fan_speed": [
-		"60"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"20"
-	],
-	"fan_max_speed": [
-		"15"
-	],
-	"fan_min_speed": [
-		"1"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"0"
-	],
-	"filament_density": [
-		"1.05"
-	],
-	"filament_deretraction_speed": [
-		"80"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"70%"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"1"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"2"
-	],
-	"filament_retraction_minimum_travel": [
-		"1"
-	],
-	"filament_retraction_speed": [
-		"80"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"1"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"100"
-	],
-	"hot_plate_temp": [
-		"90"
-	],
-	"hot_plate_temp_initial_layer": [
-		"90"
-	],
-	"nozzle_temperature_initial_layer": [
-		"250"
-	],
-	"nozzle_temperature_range_high": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"15"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pressure_advance": [
-		"0.05"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"16"
-	],
-	"slow_down_min_speed": [
-		"25"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"90"
-	],
-	"textured_plate_temp_initial_layer": [
-		"90"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -1,255 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle",
-	"inherits": "fdm_filament_asa",
-	"from": "system",
-	"setting_id": "cWBQa7XzDl3czIOs",
-	"filament_id": "OF0yFLkY",
-	"instantiation": "true",
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_settings_id": [
-		"Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"filament_type": [
-		"ASA"
-	],
-	"filament_flow_ratio": [
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"nozzle_temperature": [
-		"270"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"bed_type": [
-		"High Temp Plate"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"5"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"80"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"during_print_exhaust_fan_speed": [
-		"60"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"20"
-	],
-	"fan_max_speed": [
-		"15"
-	],
-	"fan_min_speed": [
-		"1"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"30"
-	],
-	"filament_density": [
-		"1.04"
-	],
-	"filament_deretraction_speed": [
-		"80"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"70%"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"1"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"2"
-	],
-	"filament_retraction_minimum_travel": [
-		"1"
-	],
-	"filament_retraction_speed": [
-		"80"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"1"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"100"
-	],
-	"hot_plate_temp": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"100"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270"
-	],
-	"nozzle_temperature_range_high": [
-		"280"
-	],
-	"nozzle_temperature_range_low": [
-		"240"
-	],
-	"overhang_fan_speed": [
-		"15"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pressure_advance": [
-		"0.05"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"16"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"110"
-	],
-	"textured_plate_temp": [
-		"100"
-	],
-	"textured_plate_temp_initial_layer": [
-		"100"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -1,255 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle",
-	"inherits": "fdm_filament_pet",
-	"from": "system",
-	"setting_id": "suyxKj9qKLtpBhhU",
-	"filament_id": "OFo6n2pB",
-	"instantiation": "true",
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_settings_id": [
-		"Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"filament_type": [
-		"PETG"
-	],
-	"filament_flow_ratio": [
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"8"
-	],
-	"nozzle_temperature": [
-		"230"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"bed_type": [
-		"High Temp Plate"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"5"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"80"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"during_print_exhaust_fan_speed": [
-		"60"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"20"
-	],
-	"fan_max_speed": [
-		"80"
-	],
-	"fan_min_speed": [
-		"15"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"0"
-	],
-	"filament_density": [
-		"1.23"
-	],
-	"filament_deretraction_speed": [
-		"80"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"80%"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"1"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"2"
-	],
-	"filament_retraction_minimum_travel": [
-		"1"
-	],
-	"filament_retraction_speed": [
-		"80"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"1"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"6"
-	],
-	"hot_plate_temp": [
-		"70"
-	],
-	"hot_plate_temp_initial_layer": [
-		"70"
-	],
-	"nozzle_temperature_initial_layer": [
-		"230"
-	],
-	"nozzle_temperature_range_high": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"90"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pressure_advance": [
-		"0.05"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"10"
-	],
-	"slow_down_min_speed": [
-		"25"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"70"
-	],
-	"textured_plate_temp_initial_layer": [
-		"70"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -1,42 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle",
-	"inherits": "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle",
-	"from": "system",
-	"setting_id": "OOOjWFMFhP1fMhFf",
-	"filament_id": "OFo6n2pB",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PETG"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.8 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"filament_retraction_length": [
-		"0.8"
-	],
-	"hot_plate_temp": [
-		"70"
-	],
-	"hot_plate_temp_initial_layer": [
-		"70"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle.json

@@ -1,255 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"setting_id": "uJRZr6orTVm79FeE",
-	"filament_id": "OFmjN2bc",
-	"instantiation": "true",
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_settings_id": [
-		"Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"1.6"
-	],
-	"nozzle_temperature": [
-		"230"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.2 nozzle"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"bed_type": [
-		"High Temp Plate"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"80"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"during_print_exhaust_fan_speed": [
-		"60"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"80"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"nozzle_temperature_initial_layer": [
-		"230"
-	],
-	"nozzle_temperature_range_high": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pressure_advance": [
-		"0.05"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -1,255 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"setting_id": "udLvkeYZ9Av7GkDz",
-	"filament_id": "OFmjN2bc",
-	"instantiation": "true",
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_settings_id": [
-		"Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"nozzle_temperature": [
-		"210"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"bed_type": [
-		"High Temp Plate"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"80"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"during_print_exhaust_fan_speed": [
-		"60"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"80"
-	],
-	"fan_max_speed": [
-		"80"
-	],
-	"fan_min_speed": [
-		"60"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_range_high": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pressure_advance": [
-		"0.05"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -1,255 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"setting_id": "W69H1Vca3f74FfYj",
-	"filament_id": "OFmjN2bc",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.6 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"bed_type": [
-		"High Temp Plate"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"80"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"during_print_exhaust_fan_speed": [
-		"60"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"80"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"65"
-	],
-	"hot_plate_temp_initial_layer": [
-		"65"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_range_high": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pressure_advance": [
-		"0.05"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -1,255 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"setting_id": "TR27JCwXxHeVhVHN",
-	"filament_id": "OFmjN2bc",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.8 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"nozzle_temperature": [
-		"205"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"bed_type": [
-		"High Temp Plate"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"80"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"during_print_exhaust_fan_speed": [
-		"60"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"80"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"fan_min_speed": [
-		"80"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.6"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"60"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"3"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"nozzle_temperature_initial_layer": [
-		"215"
-	],
-	"nozzle_temperature_range_high": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pressure_advance": [
-		"0.05"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -1,255 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"setting_id": "i0FTxiH68CKHiLLT",
-	"filament_id": "OF80Qbpq",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"bed_type": [
-		"High Temp Plate"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"80"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"during_print_exhaust_fan_speed": [
-		"60"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"80"
-	],
-	"fan_max_speed": [
-		"80"
-	],
-	"fan_min_speed": [
-		"60"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"nozzle_temperature": [
-		"210"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_range_high": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pressure_advance": [
-		"0.05"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -1,258 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"setting_id": "XHa1HSjh0RjAo0nz",
-	"filament_id": "OF80Qbpq",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.6 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.94"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"bed_type": [
-		"High Temp Plate"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"80"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"during_print_exhaust_fan_speed": [
-		"60"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"80"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"40"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"1.5"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Slope Lift"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"65"
-	],
-	"hot_plate_temp_initial_layer": [
-		"65"
-	],
-	"nozzle_temperature": [
-		"210"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_range_high": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pressure_advance": [
-		"0.05"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"10"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -1,261 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"setting_id": "iRVPFxNMEfkCDnMh",
-	"filament_id": "OF80Qbpq",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.8 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"bed_type": [
-		"High Temp Plate"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"80"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"during_print_exhaust_fan_speed": [
-		"60"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"80"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"fan_max_speed_BRASS": [
-		"100"
-	],
-	"fan_min_speed": [
-		"80"
-	],
-	"fan_min_speed_BRASS": [
-		"100"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"40"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"1.5"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"3"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"nozzle_temperature": [
-		"205"
-	],
-	"nozzle_temperature_initial_layer": [
-		"215"
-	],
-	"nozzle_temperature_range_high": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pressure_advance": [
-		"0.05"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -1,255 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"setting_id": "itTckVFabfsVbNBK",
-	"filament_id": "OF5PtjTp",
-	"instantiation": "true",
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_settings_id": [
-		"Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"7.2"
-	],
-	"nozzle_temperature": [
-		"210"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"bed_type": [
-		"High Temp Plate"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"80"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"during_print_exhaust_fan_speed": [
-		"60"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"80"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"0"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"40"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"0%"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"1"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.8"
-	],
-	"filament_retraction_minimum_travel": [
-		"2"
-	],
-	"filament_retraction_speed": [
-		"60"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"1"
-	],
-	"filament_wipe_distance": [
-		"2"
-	],
-	"filament_z_hop": [
-		"0.4"
-	],
-	"filament_z_hop_types": [
-		"Auto Lift"
-	],
-	"full_fan_speed_layer": [
-		"3"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_range_high": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pressure_advance": [
-		"0.05"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"9"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -1,255 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"setting_id": "YLxoiuRDXBWLQYw4",
-	"filament_id": "OFjVOWfJ",
-	"instantiation": "true",
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_settings_id": [
-		"Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"18"
-	],
-	"nozzle_temperature": [
-		"205"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"bed_type": [
-		"High Temp Plate"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"80"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"during_print_exhaust_fan_speed": [
-		"60"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"80"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"2"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"nozzle_temperature_initial_layer": [
-		"210"
-	],
-	"nozzle_temperature_range_high": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pressure_advance": [
-		"0.035"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"7"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -1,255 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"setting_id": "JwcCfY4XVCRJaDeS",
-	"filament_id": "OFCSyK66",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"bed_type": [
-		"High Temp Plate"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"80"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"during_print_exhaust_fan_speed": [
-		"60"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"80"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"80"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"1.2"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Slope Lift"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"nozzle_temperature": [
-		"210"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_range_high": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pressure_advance": [
-		"0.05"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -1,255 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"setting_id": "Sjw7irNgwCZMfWS3",
-	"filament_id": "OFCSyK66",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.6 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.94"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"bed_type": [
-		"High Temp Plate"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"80"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"during_print_exhaust_fan_speed": [
-		"60"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"80"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"50"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"1.2"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Slope Lift"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"65"
-	],
-	"hot_plate_temp_initial_layer": [
-		"65"
-	],
-	"nozzle_temperature": [
-		"210"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_range_high": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pressure_advance": [
-		"0.05"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -1,255 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"setting_id": "HeQwxU4T2W1V0LM3",
-	"filament_id": "OFCSyK66",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.8 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"bed_type": [
-		"High Temp Plate"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"80"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"during_print_exhaust_fan_speed": [
-		"60"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"80"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"40"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"1.5"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Slope Lift"
-	],
-	"full_fan_speed_layer": [
-		"3"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"nozzle_temperature": [
-		"205"
-	],
-	"nozzle_temperature_initial_layer": [
-		"210"
-	],
-	"nozzle_temperature_range_high": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pressure_advance": [
-		"0.035"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -1,255 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"setting_id": "H3PIqeTzjvtFQXYv",
-	"filament_id": "OFIE3vOf",
-	"instantiation": "true",
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_settings_id": [
-		"Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"9"
-	],
-	"nozzle_temperature": [
-		"210"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"bed_type": [
-		"High Temp Plate"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"80"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"during_print_exhaust_fan_speed": [
-		"60"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"80"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"0"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.8"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"30"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"3"
-	],
-	"hot_plate_temp": [
-		"65"
-	],
-	"hot_plate_temp_initial_layer": [
-		"65"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_range_high": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pressure_advance": [
-		"0.05"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"10"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -1,255 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"setting_id": "4zmGMIi6jHJhU4c6",
-	"filament_id": "OF5F0S66",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.97"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"bed_type": [
-		"High Temp Plate"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"80"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"during_print_exhaust_fan_speed": [
-		"60"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"100"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"40"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.8"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"30"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"nozzle_temperature": [
-		"210"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_range_high": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pressure_advance": [
-		"0.05"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -1,255 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"setting_id": "wLkJ1CJgdWnT4NoJ",
-	"filament_id": "OF5F0S66",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.6 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.94"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"bed_type": [
-		"High Temp Plate"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"80"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"during_print_exhaust_fan_speed": [
-		"60"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"80"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"50"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"1.2"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Slope Lift"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"65"
-	],
-	"hot_plate_temp_initial_layer": [
-		"65"
-	],
-	"nozzle_temperature": [
-		"210"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_range_high": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pressure_advance": [
-		"0.05"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -1,255 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"setting_id": "kkcDxmDe6F9fwhoJ",
-	"filament_id": "OF5F0S66",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.8 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"bed_type": [
-		"High Temp Plate"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"80"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"during_print_exhaust_fan_speed": [
-		"60"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"80"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"fan_min_speed": [
-		"80"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"40"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"1.5"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Slope Lift"
-	],
-	"full_fan_speed_layer": [
-		"3"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"nozzle_temperature": [
-		"205"
-	],
-	"nozzle_temperature_initial_layer": [
-		"215"
-	],
-	"nozzle_temperature_range_high": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pressure_advance": [
-		"0.035"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -1,255 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"setting_id": "QRl3zpmacQ8D8aNX",
-	"filament_id": "OFCp3Bgo",
-	"instantiation": "true",
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_settings_id": [
-		"Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_flow_ratio": [
-		"0.97"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"nozzle_temperature": [
-		"210"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"bed_type": [
-		"High Temp Plate"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"80"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"during_print_exhaust_fan_speed": [
-		"60"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"80"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.8"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"30"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"3"
-	],
-	"hot_plate_temp": [
-		"65"
-	],
-	"hot_plate_temp_initial_layer": [
-		"65"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_range_high": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pressure_advance": [
-		"0.05"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"14"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -1,255 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"setting_id": "qF5SGZKoINokZfx2",
-	"filament_id": "OFFwJWea",
-	"instantiation": "true",
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_settings_id": [
-		"Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_flow_ratio": [
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"7.2"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"bed_type": [
-		"High Temp Plate"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"80"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"during_print_exhaust_fan_speed": [
-		"60"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"80"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"nil"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.5"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"30"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"3"
-	],
-	"hot_plate_temp": [
-		"65"
-	],
-	"hot_plate_temp_initial_layer": [
-		"65"
-	],
-	"nozzle_temperature_initial_layer": [
-		"230"
-	],
-	"nozzle_temperature_range_high": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pressure_advance": [
-		"0.05"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"10"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"65"
-	],
-	"textured_plate_temp_initial_layer": [
-		"65"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -1,51 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle",
-	"inherits": "Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle",
-	"from": "system",
-	"setting_id": "6aUrszW2Dj8CNYIp",
-	"filament_id": "OFFwJWea",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.6 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"7.2"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"80"
-	],
-	"filament_retraction_length": [
-		"1.2"
-	],
-	"filament_retraction_speed": [
-		"60"
-	],
-	"nozzle_temperature_initial_layer": [
-		"230"
-	],
-	"pressure_advance": [
-		"0.025"
-	],
-	"slow_down_layer_time": [
-		"10"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -1,51 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle",
-	"inherits": "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle",
-	"from": "system",
-	"setting_id": "f8K19ebfxiXji84y",
-	"filament_id": "OFFwJWea",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.8 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"7.2"
-	],
-	"nozzle_temperature": [
-		"220"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"filament_retraction_length": [
-		"1.2"
-	],
-	"filament_retraction_speed": [
-		"80"
-	],
-	"hot_plate_temp": [
-		"65"
-	],
-	"hot_plate_temp_initial_layer": [
-		"65"
-	],
-	"nozzle_temperature_initial_layer": [
-		"230"
-	],
-	"pressure_advance": [
-		"0.025"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -1,273 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"setting_id": "NTs7c6NqAudTl9wk",
-	"filament_id": "OF7c9fln",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"filament_flow_ratio": [
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"bed_type": [
-		"High Temp Plate"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"80"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"dont_slow_down_outer_wall": [
-		"1"
-	],
-	"during_print_exhaust_fan_speed": [
-		"60"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"80"
-	],
-	"fan_cooling_layer_time_BRASS": [
-		"100"
-	],
-	"fan_max_speed": [
-		"80"
-	],
-	"fan_max_speed_BRASS": [
-		"100"
-	],
-	"fan_min_speed": [
-		"60"
-	],
-	"fan_min_speed_BRASS": [
-		"70"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"20"
-	],
-	"filament_density": [
-		"1.24"
-	],
-	"filament_deretraction_speed": [
-		"40"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"nil"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"1.2"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"0"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"nozzle_temperature": [
-		"210"
-	],
-	"nozzle_temperature_BRASS": [
-		"205"
-	],
-	"nozzle_temperature_initial_layer": [
-		"220"
-	],
-	"nozzle_temperature_range_high": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"50%"
-	],
-	"pressure_advance": [
-		"0.05"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"0"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_layer_time_BRASS": [
-		"10"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	]
-}

resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -1,255 +0,0 @@
-{
-	"type": "filament",
-	"name": "Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle",
-	"inherits": "fdm_filament_tpu",
-	"from": "system",
-	"setting_id": "oSWtTJpng3ERixPJ",
-	"filament_id": "OFMsDGbs",
-	"instantiation": "true",
-	"filament_vendor": [
-		"Anycubic"
-	],
-	"filament_settings_id": [
-		"Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"filament_type": [
-		"TPU"
-	],
-	"filament_flow_ratio": [
-		"1"
-	],
-	"filament_max_volumetric_speed": [
-		"3.2"
-	],
-	"nozzle_temperature": [
-		"210"
-	],
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"activate_air_filtration": [
-		"0"
-	],
-	"activate_chamber_temp_control": [
-		"0"
-	],
-	"additional_cooling_fan_speed": [
-		"0"
-	],
-	"bed_type": [
-		"High Temp Plate"
-	],
-	"chamber_temperature": [
-		"0"
-	],
-	"close_fan_the_first_x_layers": [
-		"1"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [],
-	"compatible_prints_condition": "",
-	"complete_print_exhaust_fan_speed": [
-		"80"
-	],
-	"cool_plate_temp": [
-		"35"
-	],
-	"cool_plate_temp_initial_layer": [
-		"35"
-	],
-	"default_filament_colour": [
-		""
-	],
-	"during_print_exhaust_fan_speed": [
-		"60"
-	],
-	"enable_overhang_bridge_fan": [
-		"1"
-	],
-	"enable_pressure_advance": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"0"
-	],
-	"eng_plate_temp_initial_layer": [
-		"0"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"fan_max_speed": [
-		"100"
-	],
-	"fan_min_speed": [
-		"80"
-	],
-	"filament_cooling_final_speed": [
-		"0"
-	],
-	"filament_cooling_initial_speed": [
-		"0"
-	],
-	"filament_cooling_moves": [
-		"0"
-	],
-	"filament_cost": [
-		"0"
-	],
-	"filament_density": [
-		"1.23"
-	],
-	"filament_deretraction_speed": [
-		"25"
-	],
-	"filament_diameter": [
-		"1.75"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode\n"
-	],
-	"filament_is_support": [
-		"0"
-	],
-	"filament_loading_speed": [
-		"0"
-	],
-	"filament_loading_speed_start": [
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil"
-	],
-	"filament_minimal_purge_on_wipe_tower": [
-		"15"
-	],
-	"filament_multitool_ramming": [
-		"0"
-	],
-	"filament_multitool_ramming_flow": [
-		"0"
-	],
-	"filament_multitool_ramming_volume": [
-		"0"
-	],
-	"filament_notes": [
-		""
-	],
-	"filament_ramming_parameters": [
-		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-	],
-	"filament_retract_before_wipe": [
-		"0%"
-	],
-	"filament_retract_lift_above": [
-		"nil"
-	],
-	"filament_retract_lift_below": [
-		"nil"
-	],
-	"filament_retract_lift_enforce": [
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"1"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil"
-	],
-	"filament_retraction_length": [
-		"2"
-	],
-	"filament_retraction_minimum_travel": [
-		"1"
-	],
-	"filament_retraction_speed": [
-		"35"
-	],
-	"filament_shrink": [
-		"100%"
-	],
-	"filament_soluble": [
-		"0"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode"
-	],
-	"filament_toolchange_delay": [
-		"0"
-	],
-	"filament_unloading_speed": [
-		"0"
-	],
-	"filament_unloading_speed_start": [
-		"0"
-	],
-	"filament_wipe": [
-		"1"
-	],
-	"filament_wipe_distance": [
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil"
-	],
-	"full_fan_speed_layer": [
-		"3"
-	],
-	"hot_plate_temp": [
-		"60"
-	],
-	"hot_plate_temp_initial_layer": [
-		"60"
-	],
-	"nozzle_temperature_initial_layer": [
-		"230"
-	],
-	"nozzle_temperature_range_high": [
-		"230"
-	],
-	"nozzle_temperature_range_low": [
-		"190"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"overhang_fan_threshold": [
-		"95%"
-	],
-	"pressure_advance": [
-		"0.05"
-	],
-	"reduce_fan_stop_start_freq": [
-		"1"
-	],
-	"required_nozzle_HRC": [
-		"0"
-	],
-	"slow_down_for_layer_cooling": [
-		"1"
-	],
-	"slow_down_layer_time": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"support_material_interface_fan_speed": [
-		"-1"
-	],
-	"temperature_vitrification": [
-		"60"
-	],
-	"textured_plate_temp": [
-		"60"
-	],
-	"textured_plate_temp_initial_layer": [
-		"60"
-	]
-}

resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.2 nozzle.json

@@ -1,255 +0,0 @@
-{
-	"type": "machine",
-	"name": "Anycubic Kobra 3 V2 0.2 nozzle",
-	"inherits": "fdm_machine_common",
-	"from": "system",
-	"setting_id": "gaQ37xRo6J467j1y",
-	"instantiation": "true",
-	"printer_technology": "FFF",
-	"printer_settings_id": "Anycubic Kobra 3 V2 0.2 nozzle",
-	"printer_model": "Anycubic Kobra 3 V2",
-	"printer_variant": "0.2",
-	"nozzle_diameter": [
-		"0.2"
-	],
-	"default_print_profile": "0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle",
-	"default_filament_profile": [
-		"Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle"
-	],
-	"disable_m73": "0",
-	"gcode_flavor": "klipper",
-	"printable_area": [
-		"0x0",
-		"255x0",
-		"255x255",
-		"0x255"
-	],
-	"printable_height": "260",
-	"thumbnails": [
-		"230x110"
-	],
-	"thumbnails_format": "PNG",
-	"thumbnails_internal": [
-		"512x512/PNG/top"
-	],
-	"thumbnails_internal_switch": "1",
-	"adaptive_bed_mesh_margin": "0",
-	"auxiliary_fan": "0",
-	"bbl_use_printhost": "0",
-	"bed_custom_model": "",
-	"bed_custom_texture": "",
-	"bed_exclude_area": [],
-	"bed_mesh_max": "0,0",
-	"bed_mesh_min": "0,0",
-	"bed_mesh_probe_distance": "0,0",
-	"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
-	"best_object_pos": "0.5,0.5",
-	"change_extrusion_role_gcode": "",
-	"change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G1 E-2 F2400\n;;; G1 Z{max(toolchange_z+0.6, 5.0)} F600\n;;; G1 X271.5 F12000\n;;; G1 E-5 F600\n;;; G1 X278 F600\n;;; M400 P3530\n;;; G1 E-1 F600\n;;; G1 Z{max(toolchange_z+2.6, 7.0)}  F600\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P31050\n;;; M400 P17510\n; 2\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n;;; G1 X250 F1200\n;;; M400 P0\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n; 3.1\n;;; M106 S255\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.2\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.3\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END",
-	"cooling_tube_length": "0",
-	"cooling_tube_retraction": "0",
-	"deretraction_speed": [
-		"40"
-	],
-	"emit_machine_limits_to_gcode": "1",
-	"enable_filament_ramming": "0",
-	"enable_long_retraction_when_cut": "0",
-	"extra_loading_move": "0",
-	"extruder_clearance_height_to_lid": "250",
-	"extruder_clearance_height_to_rod": "20",
-	"extruder_clearance_radius": "65",
-	"extruder_colour": [
-		"FF4D4F"
-	],
-	"extruder_offset": [
-		"0x0"
-	],
-	"fan_kickstart": "0",
-	"fan_speedup_overhangs": "1",
-	"fan_speedup_time": "0",
-	"head_wrap_detect_zone": [],
-	"high_current_on_filament_swap": "0",
-	"host_type": "octoprint",
-	"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
-	"long_retractions_when_cut": [
-		"0"
-	],
-	"machine_end_gcode": "G92 E0\nG1 E-2 F3600\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F900 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors\n\n",
-	"machine_load_filament_time": "42",
-	"machine_max_acceleration_e": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_extruding": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_retracting": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_travel": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_x": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_y": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_z": [
-		"1000",
-		"1000",
-		"1000"
-	],
-	"machine_max_jerk_e": [
-		"20",
-		"20",
-		"20"
-	],
-	"machine_max_jerk_x": [
-		"20",
-		"20",
-		"20"
-	],
-	"machine_max_jerk_y": [
-		"20",
-		"20",
-		"20"
-	],
-	"machine_max_jerk_z": [
-		"20",
-		"20",
-		"20"
-	],
-	"machine_max_speed_e": [
-		"600",
-		"300",
-		"780"
-	],
-	"machine_max_speed_x": [
-		"600",
-		"300",
-		"780"
-	],
-	"machine_max_speed_y": [
-		"600",
-		"300",
-		"780"
-	],
-	"machine_max_speed_z": [
-		"15",
-		"10",
-		"26"
-	],
-	"machine_min_extruding_rate": [
-		"0",
-		"0",
-		"0"
-	],
-	"machine_min_travel_rate": [
-		"0",
-		"0",
-		"0"
-	],
-	"machine_pause_gcode": "M600",
-	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.051\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}",
-	"machine_tool_change_time": "0",
-	"machine_unload_filament_time": "0",
-	"manual_filament_change": "0",
-	"max_layer_height": [
-		"0.14"
-	],
-	"min_layer_height": [
-		"0.08"
-	],
-	"nozzle_height": "4",
-	"nozzle_hrc": "0",
-	"nozzle_type": "brass",
-	"nozzle_volume": "107",
-	"parking_pos_retraction": "0",
-	"pellet_modded_printer": "0",
-	"preferred_orientation": "0",
-	"printer_flush_multiplier": "1",
-	"printer_notes": "",
-	"printer_structure": "i3",
-	"printhost_authorization_type": "key",
-	"printhost_ssl_ignore_revoke": "0",
-	"printing_by_object_gcode": "",
-	"purge_in_prime_tower": "0",
-	"retract_before_wipe": [
-		"0%"
-	],
-	"retract_length_toolchange": [
-		"0"
-	],
-	"retract_lift_above": [
-		"0.3"
-	],
-	"retract_lift_below": [
-		"258"
-	],
-	"retract_lift_enforce": [
-		"All Surfaces"
-	],
-	"retract_on_top_layer": [
-		"1"
-	],
-	"retract_restart_extra": [
-		"0"
-	],
-	"retract_restart_extra_toolchange": [
-		"0"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"retraction_distances_when_cut": [
-		"0"
-	],
-	"retraction_length": [
-		"0.8"
-	],
-	"retraction_minimum_travel": [
-		"0"
-	],
-	"retraction_speed": [
-		"40"
-	],
-	"scan_first_layer": "0",
-	"single_extruder_multi_material": "1",
-	"support_air_filtration": "1",
-	"support_chamber_temp_control": "1",
-	"support_multi_bed_types": "1",
-	"template_custom_gcode": "",
-	"time_cost": "0",
-	"time_lapse_gcode": "",
-	"travel_slope": [
-		"3"
-	],
-	"upward_compatible_machine": [],
-	"use_firmware_retraction": "0",
-	"use_relative_e_distances": "1",
-	"wipe": [
-		"1"
-	],
-	"wipe_distance": [
-		"1"
-	],
-	"z_hop": [
-		"0.4"
-	],
-	"z_hop_types": [
-		"Auto Lift"
-	],
-	"z_offset": "0"
-}

resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -1,251 +0,0 @@
-{
-	"type": "machine",
-	"name": "Anycubic Kobra 3 V2 0.4 nozzle",
-	"inherits": "fdm_machine_common",
-	"from": "system",
-	"setting_id": "l49qdfdrHYEO04bV",
-	"instantiation": "true",
-	"printer_technology": "FFF",
-	"printer_settings_id": "Anycubic Kobra 3 V2 0.4 nozzle",
-	"printer_model": "Anycubic Kobra 3 V2",
-	"printer_variant": "0.4",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"default_print_profile": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
-	"default_filament_profile": [
-		"Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"disable_m73": "0",
-	"gcode_flavor": "klipper",
-	"printable_area": [
-		"0x0",
-		"255x0",
-		"255x255",
-		"0x255"
-	],
-	"printable_height": "260",
-	"thumbnails": "230x110/PNG",
-	"thumbnails_format": "PNG",
-	"thumbnails_internal": "512x512/PNG/top",
-	"thumbnails_internal_switch": "1",
-	"adaptive_bed_mesh_margin": "0",
-	"auxiliary_fan": "0",
-	"bbl_use_printhost": "0",
-	"bed_custom_model": "",
-	"bed_custom_texture": "",
-	"bed_exclude_area": [],
-	"bed_mesh_max": "0,0",
-	"bed_mesh_min": "0,0",
-	"bed_mesh_probe_distance": "0,0",
-	"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
-	"best_object_pos": "0.5,0.5",
-	"change_extrusion_role_gcode": "",
-	"change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G1 E-2 F2400\n;;; G1 Z{max(toolchange_z+0.6, 5.0)} F600\n;;; G1 X271.5 F12000\n;;; G1 E-5 F600\n;;; G1 X278 F600\n;;; M400 P3530\n;;; G1 E-1 F600\n;;; G1 Z{max(toolchange_z+2.6, 7.0)}  F600\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P31050\n;;; M400 P17510\n; 2\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n;;; G1 X250 F1200\n;;; M400 P0\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n; 3.1\n;;; M106 S255\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.2\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.3\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END",
-	"cooling_tube_length": "0",
-	"cooling_tube_retraction": "0",
-	"deretraction_speed": [
-		"60"
-	],
-	"emit_machine_limits_to_gcode": "1",
-	"enable_filament_ramming": "0",
-	"enable_long_retraction_when_cut": "0",
-	"extra_loading_move": "0",
-	"extruder_clearance_height_to_lid": "250",
-	"extruder_clearance_height_to_rod": "20",
-	"extruder_clearance_radius": "65",
-	"extruder_colour": [
-		"FF4D4F"
-	],
-	"extruder_offset": [
-		"0x0"
-	],
-	"fan_kickstart": "0",
-	"fan_speedup_overhangs": "1",
-	"fan_speedup_time": "0",
-	"head_wrap_detect_zone": [],
-	"high_current_on_filament_swap": "0",
-	"host_type": "octoprint",
-	"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
-	"long_retractions_when_cut": [
-		"0"
-	],
-	"machine_end_gcode": "M400\nG92 E0 ; zero the extruder\nG1 E-2 F3600\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F900 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors",
-	"machine_load_filament_time": "42",
-	"machine_max_acceleration_e": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_extruding": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_retracting": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_travel": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_x": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_y": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_z": [
-		"1000",
-		"1000",
-		"1000"
-	],
-	"machine_max_jerk_e": [
-		"20",
-		"20",
-		"20"
-	],
-	"machine_max_jerk_x": [
-		"20",
-		"20",
-		"20"
-	],
-	"machine_max_jerk_y": [
-		"20",
-		"20",
-		"20"
-	],
-	"machine_max_jerk_z": [
-		"20",
-		"20",
-		"20"
-	],
-	"machine_max_speed_e": [
-		"600",
-		"300",
-		"780"
-	],
-	"machine_max_speed_x": [
-		"600",
-		"300",
-		"780"
-	],
-	"machine_max_speed_y": [
-		"600",
-		"300",
-		"780"
-	],
-	"machine_max_speed_z": [
-		"15",
-		"10",
-		"26"
-	],
-	"machine_min_extruding_rate": [
-		"0",
-		"0",
-		"0"
-	],
-	"machine_min_travel_rate": [
-		"0",
-		"0",
-		"0"
-	],
-	"machine_pause_gcode": "M600",
-	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.051\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}",
-	"machine_tool_change_time": "0",
-	"machine_unload_filament_time": "0",
-	"manual_filament_change": "0",
-	"max_layer_height": [
-		"0.28"
-	],
-	"min_layer_height": [
-		"0.08"
-	],
-	"nozzle_height": "4",
-	"nozzle_hrc": "0",
-	"nozzle_type": "brass",
-	"nozzle_volume": "107",
-	"parking_pos_retraction": "0",
-	"pellet_modded_printer": "0",
-	"preferred_orientation": "0",
-	"printer_flush_multiplier": "1",
-	"printer_notes": "",
-	"printer_structure": "i3",
-	"printhost_authorization_type": "key",
-	"printhost_ssl_ignore_revoke": "0",
-	"printing_by_object_gcode": "",
-	"purge_in_prime_tower": "0",
-	"retract_before_wipe": [
-		"0%"
-	],
-	"retract_length_toolchange": [
-		"0"
-	],
-	"retract_lift_above": [
-		"0"
-	],
-	"retract_lift_below": [
-		"259"
-	],
-	"retract_lift_enforce": [
-		"All Surfaces"
-	],
-	"retract_on_top_layer": [
-		"1"
-	],
-	"retract_restart_extra": [
-		"0"
-	],
-	"retract_restart_extra_toolchange": [
-		"0"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"retraction_distances_when_cut": [
-		"0"
-	],
-	"retraction_length": [
-		"1"
-	],
-	"retraction_minimum_travel": [
-		"1"
-	],
-	"retraction_speed": [
-		"60"
-	],
-	"scan_first_layer": "0",
-	"single_extruder_multi_material": "1",
-	"support_air_filtration": "0",
-	"support_chamber_temp_control": "0",
-	"support_multi_bed_types": "1",
-	"template_custom_gcode": "",
-	"time_cost": "0",
-	"time_lapse_gcode": "",
-	"travel_slope": [
-		"3"
-	],
-	"upward_compatible_machine": [],
-	"use_firmware_retraction": "0",
-	"use_relative_e_distances": "1",
-	"wipe": [
-		"1"
-	],
-	"wipe_distance": [
-		"2"
-	],
-	"z_hop": [
-		"0.4"
-	],
-	"z_hop_types": [
-		"Slope Lift"
-	],
-	"z_offset": "0"
-}

resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -1,251 +0,0 @@
-{
-	"type": "machine",
-	"name": "Anycubic Kobra 3 V2 0.6 nozzle",
-	"inherits": "fdm_machine_common",
-	"from": "system",
-	"setting_id": "hQQgQT5HeCVGpBAL",
-	"instantiation": "true",
-	"printer_technology": "FFF",
-	"printer_settings_id": "Anycubic Kobra 3 V2 0.6 nozzle",
-	"printer_model": "Anycubic Kobra 3 V2",
-	"printer_variant": "0.6",
-	"nozzle_diameter": [
-		"0.6"
-	],
-	"default_print_profile": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
-	"default_filament_profile": [
-		"Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle"
-	],
-	"disable_m73": "0",
-	"gcode_flavor": "klipper",
-	"printable_area": [
-		"0x0",
-		"255x0",
-		"255x255",
-		"0x255"
-	],
-	"printable_height": "260",
-	"thumbnails": "230x110/PNG",
-	"thumbnails_format": "PNG",
-	"thumbnails_internal": "512x512/PNG/top",
-	"thumbnails_internal_switch": "1",
-	"adaptive_bed_mesh_margin": "0",
-	"auxiliary_fan": "0",
-	"bbl_use_printhost": "0",
-	"bed_custom_model": "",
-	"bed_custom_texture": "",
-	"bed_exclude_area": [],
-	"bed_mesh_max": "0,0",
-	"bed_mesh_min": "0,0",
-	"bed_mesh_probe_distance": "0,0",
-	"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
-	"best_object_pos": "0.5,0.5",
-	"change_extrusion_role_gcode": "",
-	"change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G1 E-2 F2400\n;;; G1 Z{max(toolchange_z+0.6, 5.0)} F600\n;;; G1 X271.5 F12000\n;;; G1 E-5 F600\n;;; G1 X278 F600\n;;; M400 P3530\n;;; G1 E-1 F600\n;;; G1 Z{max(toolchange_z+2.6, 7.0)}  F600\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P31050\n;;; M400 P17510\n; 2\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n;;; G1 X250 F1200\n;;; M400 P0\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n; 3.1\n;;; M106 S255\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.2\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.3\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END",
-	"cooling_tube_length": "0",
-	"cooling_tube_retraction": "0",
-	"deretraction_speed": [
-		"30"
-	],
-	"emit_machine_limits_to_gcode": "1",
-	"enable_filament_ramming": "0",
-	"enable_long_retraction_when_cut": "0",
-	"extra_loading_move": "0",
-	"extruder_clearance_height_to_lid": "250",
-	"extruder_clearance_height_to_rod": "20",
-	"extruder_clearance_radius": "65",
-	"extruder_colour": [
-		"FF4D4F"
-	],
-	"extruder_offset": [
-		"0x0"
-	],
-	"fan_kickstart": "0",
-	"fan_speedup_overhangs": "1",
-	"fan_speedup_time": "0",
-	"head_wrap_detect_zone": [],
-	"high_current_on_filament_swap": "0",
-	"host_type": "octoprint",
-	"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
-	"long_retractions_when_cut": [
-		"0"
-	],
-	"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-1 F3600 ; retract\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F600 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors\n\n",
-	"machine_load_filament_time": "42",
-	"machine_max_acceleration_e": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_extruding": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_retracting": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_travel": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_x": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_y": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_z": [
-		"1000",
-		"1000",
-		"1000"
-	],
-	"machine_max_jerk_e": [
-		"20",
-		"20",
-		"20"
-	],
-	"machine_max_jerk_x": [
-		"20",
-		"20",
-		"20"
-	],
-	"machine_max_jerk_y": [
-		"20",
-		"20",
-		"20"
-	],
-	"machine_max_jerk_z": [
-		"20",
-		"20",
-		"20"
-	],
-	"machine_max_speed_e": [
-		"600",
-		"300",
-		"780"
-	],
-	"machine_max_speed_x": [
-		"600",
-		"300",
-		"780"
-	],
-	"machine_max_speed_y": [
-		"600",
-		"300",
-		"780"
-	],
-	"machine_max_speed_z": [
-		"15",
-		"10",
-		"26"
-	],
-	"machine_min_extruding_rate": [
-		"0",
-		"0",
-		"0"
-	],
-	"machine_min_travel_rate": [
-		"0",
-		"0",
-		"0"
-	],
-	"machine_pause_gcode": "M600",
-	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.05\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}",
-	"machine_tool_change_time": "0",
-	"machine_unload_filament_time": "0",
-	"manual_filament_change": "0",
-	"max_layer_height": [
-		"0.42"
-	],
-	"min_layer_height": [
-		"0.12"
-	],
-	"nozzle_height": "4",
-	"nozzle_hrc": "0",
-	"nozzle_type": "brass",
-	"nozzle_volume": "107",
-	"parking_pos_retraction": "0",
-	"pellet_modded_printer": "0",
-	"preferred_orientation": "0",
-	"printer_flush_multiplier": "1",
-	"printer_notes": "",
-	"printer_structure": "i3",
-	"printhost_authorization_type": "key",
-	"printhost_ssl_ignore_revoke": "0",
-	"printing_by_object_gcode": "",
-	"purge_in_prime_tower": "0",
-	"retract_before_wipe": [
-		"0%"
-	],
-	"retract_length_toolchange": [
-		"0"
-	],
-	"retract_lift_above": [
-		"0"
-	],
-	"retract_lift_below": [
-		"259"
-	],
-	"retract_lift_enforce": [
-		"All Surfaces"
-	],
-	"retract_on_top_layer": [
-		"1"
-	],
-	"retract_restart_extra": [
-		"0"
-	],
-	"retract_restart_extra_toolchange": [
-		"0"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"retraction_distances_when_cut": [
-		"0"
-	],
-	"retraction_length": [
-		"0.8"
-	],
-	"retraction_minimum_travel": [
-		"1"
-	],
-	"retraction_speed": [
-		"30"
-	],
-	"scan_first_layer": "0",
-	"single_extruder_multi_material": "1",
-	"support_air_filtration": "1",
-	"support_chamber_temp_control": "1",
-	"support_multi_bed_types": "1",
-	"template_custom_gcode": "",
-	"time_cost": "0",
-	"time_lapse_gcode": "",
-	"travel_slope": [
-		"3"
-	],
-	"upward_compatible_machine": [],
-	"use_firmware_retraction": "0",
-	"use_relative_e_distances": "1",
-	"wipe": [
-		"1"
-	],
-	"wipe_distance": [
-		"2"
-	],
-	"z_hop": [
-		"0.4"
-	],
-	"z_hop_types": [
-		"Auto Lift"
-	],
-	"z_offset": "0"
-}

resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -1,255 +0,0 @@
-{
-	"type": "machine",
-	"name": "Anycubic Kobra 3 V2 0.8 nozzle",
-	"inherits": "fdm_machine_common",
-	"from": "system",
-	"setting_id": "LBhbohm7o4jW6OYw",
-	"instantiation": "true",
-	"printer_technology": "FFF",
-	"printer_settings_id": "Anycubic Kobra 3 V2 0.8 nozzle",
-	"printer_model": "Anycubic Kobra 3 V2",
-	"printer_variant": "0.8",
-	"nozzle_diameter": [
-		"0.8"
-	],
-	"default_print_profile": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
-	"default_filament_profile": [
-		"Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle"
-	],
-	"disable_m73": "0",
-	"gcode_flavor": "klipper",
-	"printable_area": [
-		"0x0",
-		"255x0",
-		"255x255",
-		"0x255"
-	],
-	"printable_height": "260",
-	"thumbnails": [
-		"230x110"
-	],
-	"thumbnails_format": "PNG",
-	"thumbnails_internal": [
-		"512x512/PNG/top"
-	],
-	"thumbnails_internal_switch": "1",
-	"adaptive_bed_mesh_margin": "0",
-	"auxiliary_fan": "0",
-	"bbl_use_printhost": "0",
-	"bed_custom_model": "",
-	"bed_custom_texture": "",
-	"bed_exclude_area": [],
-	"bed_mesh_max": "0,0",
-	"bed_mesh_min": "0,0",
-	"bed_mesh_probe_distance": "0,0",
-	"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
-	"best_object_pos": "0.5,0.5",
-	"change_extrusion_role_gcode": "",
-	"change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G1 E-2 F2400\n;;; G1 Z{max(toolchange_z+0.6, 5.0)} F600\n;;; G1 X271.5 F12000\n;;; G1 E-5 F600\n;;; G1 X278 F600\n;;; M400 P3530\n;;; G1 E-1 F600\n;;; G1 Z{max(toolchange_z+2.6, 7.0)}  F600\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P31050\n;;; M400 P17510\n; 2\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n;;; G1 X250 F1200\n;;; M400 P0\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n; 3.1\n;;; M106 S255\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.2\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.3\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END",
-	"cooling_tube_length": "0",
-	"cooling_tube_retraction": "0",
-	"deretraction_speed": [
-		"0"
-	],
-	"emit_machine_limits_to_gcode": "1",
-	"enable_filament_ramming": "0",
-	"enable_long_retraction_when_cut": "0",
-	"extra_loading_move": "0",
-	"extruder_clearance_height_to_lid": "250",
-	"extruder_clearance_height_to_rod": "20",
-	"extruder_clearance_radius": "65",
-	"extruder_colour": [
-		"FF4D4F"
-	],
-	"extruder_offset": [
-		"0x0"
-	],
-	"fan_kickstart": "0",
-	"fan_speedup_overhangs": "1",
-	"fan_speedup_time": "0",
-	"head_wrap_detect_zone": [],
-	"high_current_on_filament_swap": "0",
-	"host_type": "octoprint",
-	"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
-	"long_retractions_when_cut": [
-		"0"
-	],
-	"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-2 F3000 ; retract\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F600 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors\n\n",
-	"machine_load_filament_time": "42",
-	"machine_max_acceleration_e": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_extruding": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_retracting": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_travel": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_x": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_y": [
-		"20000",
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_z": [
-		"1000",
-		"1000",
-		"1000"
-	],
-	"machine_max_jerk_e": [
-		"20",
-		"20",
-		"20"
-	],
-	"machine_max_jerk_x": [
-		"20",
-		"20",
-		"20"
-	],
-	"machine_max_jerk_y": [
-		"20",
-		"20",
-		"20"
-	],
-	"machine_max_jerk_z": [
-		"20",
-		"20",
-		"20"
-	],
-	"machine_max_speed_e": [
-		"600",
-		"300",
-		"780"
-	],
-	"machine_max_speed_x": [
-		"600",
-		"300",
-		"780"
-	],
-	"machine_max_speed_y": [
-		"600",
-		"300",
-		"780"
-	],
-	"machine_max_speed_z": [
-		"15",
-		"10",
-		"26"
-	],
-	"machine_min_extruding_rate": [
-		"0",
-		"0",
-		"0"
-	],
-	"machine_min_travel_rate": [
-		"0",
-		"0",
-		"0"
-	],
-	"machine_pause_gcode": "M600",
-	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.051\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}",
-	"machine_tool_change_time": "0",
-	"machine_unload_filament_time": "0",
-	"manual_filament_change": "0",
-	"max_layer_height": [
-		"0.56"
-	],
-	"min_layer_height": [
-		"0.16"
-	],
-	"nozzle_height": "4",
-	"nozzle_hrc": "0",
-	"nozzle_type": "brass",
-	"nozzle_volume": "107",
-	"parking_pos_retraction": "0",
-	"pellet_modded_printer": "0",
-	"preferred_orientation": "0",
-	"printer_flush_multiplier": "1",
-	"printer_notes": "",
-	"printer_structure": "i3",
-	"printhost_authorization_type": "key",
-	"printhost_ssl_ignore_revoke": "0",
-	"printing_by_object_gcode": "",
-	"purge_in_prime_tower": "0",
-	"retract_before_wipe": [
-		"0%"
-	],
-	"retract_length_toolchange": [
-		"0"
-	],
-	"retract_lift_above": [
-		"0.3"
-	],
-	"retract_lift_below": [
-		"259.6"
-	],
-	"retract_lift_enforce": [
-		"All Surfaces"
-	],
-	"retract_on_top_layer": [
-		"1"
-	],
-	"retract_restart_extra": [
-		"0"
-	],
-	"retract_restart_extra_toolchange": [
-		"0"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"retraction_distances_when_cut": [
-		"0"
-	],
-	"retraction_length": [
-		"1"
-	],
-	"retraction_minimum_travel": [
-		"1"
-	],
-	"retraction_speed": [
-		"40"
-	],
-	"scan_first_layer": "0",
-	"single_extruder_multi_material": "1",
-	"support_air_filtration": "1",
-	"support_chamber_temp_control": "1",
-	"support_multi_bed_types": "1",
-	"template_custom_gcode": "",
-	"time_cost": "0",
-	"time_lapse_gcode": "",
-	"travel_slope": [
-		"3"
-	],
-	"upward_compatible_machine": [],
-	"use_firmware_retraction": "0",
-	"use_relative_e_distances": "1",
-	"wipe": [
-		"1"
-	],
-	"wipe_distance": [
-		"2"
-	],
-	"z_hop": [
-		"0.4"
-	],
-	"z_hop_types": [
-		"Auto Lift"
-	],
-	"z_offset": "0"
-}

resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2.json

@@ -1,12 +0,0 @@
-{
-    "type": "machine_model",
-    "machine_tech": "FFF",
-    "family": "Anycubic",
-    "name": "Anycubic Kobra 3 V2",
-    "model_id": "Anycubic Kobra 3 V2",
-    "nozzle_diameter": "0.4;0.2;0.6;0.8",
-    "bed_model": "Anycubic Kobra 3 V2_buildplate_model.stl",
-    "bed_texture": "Anycubic Kobra 3 V2_buildplate_texture.svg",
-    "hotend_model": "",
-    "default_materials": "Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle;Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle;Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle;Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle"
-}

resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -1,289 +0,0 @@
-{
-	"type": "process",
-	"name": "0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "9yiDozcVDSxKkz4V",
-	"instantiation": "true",
-	"print_settings_id": "0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
-	"layer_height": "0.08",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "7",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "5000",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "1",
-	"bridge_no_support": "0",
-	"bridge_speed": "30",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.15",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "10000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "1",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "250",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400",
-	"infill_anchor_max": "20",
-	"infill_combination": "0",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "45",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.5",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.2",
-	"initial_layer_speed": "45",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "6000",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.45",
-	"inner_wall_speed": "350",
-	"interface_shells": "0",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "5000",
-	"internal_solid_infill_line_width": "0.42",
-	"internal_solid_infill_pattern": "zig-zag",
-	"internal_solid_infill_speed": "200",
-	"ironing_angle": "-1",
-	"ironing_flow": "8%",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.1",
-	"ironing_speed": "15",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"line_width": "0.42",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "3",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "5000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.42",
-	"outer_wall_speed": "200",
-	"overhang_1_4_speed": "60",
-	"overhang_2_4_speed": "30",
-	"overhang_3_4_speed": "10",
-	"overhang_4_4_speed": "10",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_width": "35",
-	"prime_volume": "20",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "1",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "1",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "50%",
-	"small_perimeter_threshold": "0",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "10000",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.45",
-	"sparse_infill_pattern": "grid",
-	"sparse_infill_speed": "450",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "0",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "0.2",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.08",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "-1",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.2",
-	"support_interface_speed": "100%",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.42",
-	"support_object_xy_distance": "60%",
-	"support_on_build_plate_only": "1",
-	"support_remove_small_overhang": "1",
-	"support_speed": "100",
-	"support_style": "default",
-	"support_threshold_angle": "15",
-	"support_top_z_distance": "0.08",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "1",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_shell_layers": "9",
-	"top_shell_thickness": "0.8",
-	"top_solid_infill_flow_ratio": "0.97",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.42",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "200",
-	"travel_acceleration": "10000",
-	"travel_jerk": "9",
-	"travel_speed": "350",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "40",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "5",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_double_wall": "3",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_infill_order": "inner wall/outer wall/infill",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_bridging": "10",
-	"wipe_tower_cone_angle": "15",
-	"wipe_tower_extra_spacing": "120%",
-	"wipe_tower_extruder": "0",
-	"wipe_tower_max_purge_speed": "90",
-	"wipe_tower_no_sparse_layers": "0",
-	"wipe_tower_rotation_angle": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}

resources/profiles/Anycubic/process/0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle.json

@@ -1,289 +0,0 @@
-{
-	"type": "process",
-	"name": "0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "eSyZsnWMuOyokoLr",
-	"instantiation": "true",
-	"print_settings_id": "0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle",
-	"layer_height": "0.1",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.2 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "5",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "50%",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "0.9",
-	"bridge_no_support": "0",
-	"bridge_speed": "30",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.15",
-	"brim_type": "outer_only",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "10000",
-	"default_jerk": "10",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.075",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "1",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "0",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "100",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400",
-	"infill_anchor_max": "10",
-	"infill_combination": "0",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "30",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.25",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.1",
-	"initial_layer_speed": "30",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "6000",
-	"inner_wall_jerk": "10",
-	"inner_wall_line_width": "0.22",
-	"inner_wall_speed": "150",
-	"interface_shells": "0",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "100%",
-	"internal_solid_infill_line_width": "0.22",
-	"internal_solid_infill_pattern": "zig-zag",
-	"internal_solid_infill_speed": "120",
-	"ironing_angle": "-1",
-	"ironing_flow": "15%",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.1",
-	"ironing_speed": "15",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"line_width": "0.22",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "5",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "5000",
-	"outer_wall_jerk": "10",
-	"outer_wall_line_width": "0.22",
-	"outer_wall_speed": "80",
-	"overhang_1_4_speed": "60",
-	"overhang_2_4_speed": "50",
-	"overhang_3_4_speed": "30",
-	"overhang_4_4_speed": "10",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_width": "35",
-	"prime_volume": "20",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "2",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "100%",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "0",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "0",
-	"seam_slope_min_length": "20",
-	"seam_slope_start_height": "0",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "1",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "50%",
-	"small_perimeter_threshold": "0",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "100%",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.22",
-	"sparse_infill_pattern": "3dhoneycomb",
-	"sparse_infill_speed": "150",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "0",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "0.2",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.1",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "-1",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.5",
-	"support_interface_speed": "80",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.22",
-	"support_object_xy_distance": "0.35",
-	"support_on_build_plate_only": "1",
-	"support_remove_small_overhang": "1",
-	"support_speed": "100",
-	"support_style": "default",
-	"support_threshold_angle": "40",
-	"support_top_z_distance": "0.1",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "1",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "25%",
-	"top_shell_layers": "7",
-	"top_shell_thickness": "0.8",
-	"top_solid_infill_flow_ratio": "0.97",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.22",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "120",
-	"travel_acceleration": "15000",
-	"travel_jerk": "12",
-	"travel_speed": "350",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "40",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "5",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_double_wall": "3",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_infill_order": "inner wall/outer wall/infill",
-	"wall_loops": "4",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_bridging": "10",
-	"wipe_tower_cone_angle": "15",
-	"wipe_tower_extra_spacing": "120%",
-	"wipe_tower_extruder": "0",
-	"wipe_tower_max_purge_speed": "90",
-	"wipe_tower_no_sparse_layers": "0",
-	"wipe_tower_rotation_angle": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}

resources/profiles/Anycubic/process/0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -1,58 +0,0 @@
-{
-	"type": "process",
-	"name": "0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
-	"inherits": "0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
-	"from": "system",
-	"setting_id": "HqXRokM0mAA691LV",
-	"instantiation": "true",
-	"print_settings_id": "0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
-	"layer_height": "0.12",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"bottom_shell_thickness": "0",
-	"bridge_acceleration": "2000",
-	"bridge_speed": "30",
-	"brim_type": "auto_brim",
-	"default_acceleration": "5000",
-	"default_jerk": "9",
-	"gap_infill_speed": "180",
-	"initial_layer_infill_speed": "50",
-	"initial_layer_speed": "50",
-	"inner_wall_acceleration": "4000",
-	"inner_wall_jerk": "9",
-	"inner_wall_speed": "150",
-	"internal_solid_infill_acceleration": "5000",
-	"internal_solid_infill_speed": "180",
-	"ironing_flow": "10%",
-	"outer_wall_acceleration": "2000",
-	"outer_wall_jerk": "9",
-	"outer_wall_speed": "60",
-	"overhang_1_4_speed": "60",
-	"overhang_2_4_speed": "30",
-	"overhang_3_4_speed": "10",
-	"overhang_4_4_speed": "10",
-	"prime_tower_width": "35",
-	"raft_first_layer_expansion": "5",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"seam_slope_conditional": "1",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"small_perimeter_speed": "50%",
-	"sparse_infill_acceleration": "5000",
-	"sparse_infill_speed": "180",
-	"support_interface_top_layers": "2",
-	"support_threshold_angle": "20",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_solid_infill_flow_ratio": "0.97",
-	"top_surface_speed": "150",
-	"travel_acceleration": "5000",
-	"travel_jerk": "9",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wipe_on_loops": "0",
-	"wipe_tower_extra_spacing": "120%"
-}

resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -1,289 +0,0 @@
-{
-	"type": "process",
-	"name": "0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "NCKx6glFcaEOhqZC",
-	"instantiation": "true",
-	"print_settings_id": "0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
-	"layer_height": "0.12",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "5",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "5000",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "0.9",
-	"bridge_no_support": "0",
-	"bridge_speed": "30",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.15",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "10000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "1",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "350",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400",
-	"infill_anchor_max": "20",
-	"infill_combination": "0",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "45",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.5",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.2",
-	"initial_layer_speed": "45",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "6000",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.45",
-	"inner_wall_speed": "300",
-	"interface_shells": "0",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "5000",
-	"internal_solid_infill_line_width": "0.42",
-	"internal_solid_infill_pattern": "zig-zag",
-	"internal_solid_infill_speed": "200",
-	"ironing_angle": "-1",
-	"ironing_flow": "10%",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.1",
-	"ironing_speed": "15",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"line_width": "0.42",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "5",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "5000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.42",
-	"outer_wall_speed": "130",
-	"overhang_1_4_speed": "60",
-	"overhang_2_4_speed": "30",
-	"overhang_3_4_speed": "10",
-	"overhang_4_4_speed": "10",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_width": "35",
-	"prime_volume": "20",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "0",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "1",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "30%",
-	"small_perimeter_threshold": "0",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "10000",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.45",
-	"sparse_infill_pattern": "3dhoneycomb",
-	"sparse_infill_speed": "430",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "0",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "0.2",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.12",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "-1",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.2",
-	"support_interface_speed": "100%",
-	"support_interface_top_layers": "3",
-	"support_line_width": "0.42",
-	"support_object_xy_distance": "60%",
-	"support_on_build_plate_only": "1",
-	"support_remove_small_overhang": "1",
-	"support_speed": "100",
-	"support_style": "default",
-	"support_threshold_angle": "20",
-	"support_top_z_distance": "0.12",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "1",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_shell_layers": "5",
-	"top_shell_thickness": "0.6",
-	"top_solid_infill_flow_ratio": "0.97",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.42",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "200",
-	"travel_acceleration": "10000",
-	"travel_jerk": "9",
-	"travel_speed": "350",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "40",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "5",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_double_wall": "3",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_infill_order": "inner wall/outer wall/infill",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_bridging": "10",
-	"wipe_tower_cone_angle": "15",
-	"wipe_tower_extra_spacing": "120%",
-	"wipe_tower_extruder": "0",
-	"wipe_tower_max_purge_speed": "90",
-	"wipe_tower_no_sparse_layers": "0",
-	"wipe_tower_rotation_angle": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}

resources/profiles/Anycubic/process/0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -1,51 +0,0 @@
-{
-	"type": "process",
-	"name": "0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
-	"inherits": "0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
-	"from": "system",
-	"setting_id": "mVDCX89vYKfBA57g",
-	"instantiation": "true",
-	"print_settings_id": "0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
-	"layer_height": "0.16",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"bottom_shell_thickness": "0",
-	"bridge_acceleration": "2000",
-	"default_acceleration": "4000",
-	"default_jerk": "9",
-	"infill_anchor_max": "20",
-	"initial_layer_infill_speed": "50",
-	"initial_layer_speed": "50",
-	"inner_wall_acceleration": "4000",
-	"inner_wall_jerk": "9",
-	"internal_solid_infill_acceleration": "4000",
-	"internal_solid_infill_speed": "200",
-	"outer_wall_acceleration": "2000",
-	"outer_wall_jerk": "9",
-	"outer_wall_speed": "150",
-	"overhang_1_4_speed": "60",
-	"overhang_3_4_speed": "10",
-	"overhang_4_4_speed": "10",
-	"prime_tower_width": "30",
-	"raft_first_layer_expansion": "5",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"seam_slope_conditional": "1",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"small_perimeter_speed": "50%",
-	"sparse_infill_acceleration": "4000",
-	"sparse_infill_speed": "200",
-	"support_line_width": "0.42",
-	"support_threshold_angle": "25",
-	"top_bottom_infill_wall_overlap": "15%",
-	"travel_acceleration": "4000",
-	"travel_jerk": "9",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wipe_on_loops": "0",
-	"wipe_tower_extra_spacing": "120%"
-}

resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -1,289 +0,0 @@
-{
-	"type": "process",
-	"name": "0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "ut3FZjM7h3doFjRg",
-	"instantiation": "true",
-	"print_settings_id": "0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
-	"layer_height": "0.16",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "4",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "5000",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "0.9",
-	"bridge_no_support": "0",
-	"bridge_speed": "30",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.15",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "10000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "1",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "250",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400",
-	"infill_anchor_max": "20",
-	"infill_combination": "0",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "45",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.5",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.2",
-	"initial_layer_speed": "45",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "6000",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.45",
-	"inner_wall_speed": "200",
-	"interface_shells": "0",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "10000",
-	"internal_solid_infill_line_width": "0.42",
-	"internal_solid_infill_pattern": "zig-zag",
-	"internal_solid_infill_speed": "150",
-	"ironing_angle": "-1",
-	"ironing_flow": "10%",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.1",
-	"ironing_speed": "15",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"line_width": "0.42",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "5",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "5000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.42",
-	"outer_wall_speed": "130",
-	"overhang_1_4_speed": "60",
-	"overhang_2_4_speed": "30",
-	"overhang_3_4_speed": "10",
-	"overhang_4_4_speed": "10",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_width": "35",
-	"prime_volume": "20",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "0",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "1",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "30%",
-	"small_perimeter_threshold": "0",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "5000",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.45",
-	"sparse_infill_pattern": "3dhoneycomb",
-	"sparse_infill_speed": "300",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "0",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "0.2",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.16",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "-1",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.2",
-	"support_interface_speed": "100%",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.42",
-	"support_object_xy_distance": "60%",
-	"support_on_build_plate_only": "1",
-	"support_remove_small_overhang": "1",
-	"support_speed": "100",
-	"support_style": "default",
-	"support_threshold_angle": "25",
-	"support_top_z_distance": "0.16",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "1",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_shell_layers": "6",
-	"top_shell_thickness": "1",
-	"top_solid_infill_flow_ratio": "0.97",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.42",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "150",
-	"travel_acceleration": "10000",
-	"travel_jerk": "9",
-	"travel_speed": "350",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "40",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "5",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_double_wall": "3",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_infill_order": "inner wall/outer wall/infill",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_bridging": "10",
-	"wipe_tower_cone_angle": "15",
-	"wipe_tower_extra_spacing": "120%",
-	"wipe_tower_extruder": "0",
-	"wipe_tower_max_purge_speed": "90",
-	"wipe_tower_no_sparse_layers": "0",
-	"wipe_tower_rotation_angle": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}

resources/profiles/Anycubic/process/0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -1,57 +0,0 @@
-{
-	"type": "process",
-	"name": "0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
-	"inherits": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
-	"from": "system",
-	"setting_id": "V7T6yBxuQzWucCpA",
-	"instantiation": "true",
-	"print_settings_id": "0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
-	"layer_height": "0.2",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"bottom_shell_thickness": "0",
-	"bridge_acceleration": "4000",
-	"bridge_speed": "50",
-	"brim_object_gap": "0.1",
-	"brim_width": "5",
-	"default_acceleration": "4000",
-	"default_jerk": "9",
-	"initial_layer_infill_speed": "50",
-	"initial_layer_speed": "50",
-	"inner_wall_acceleration": "4000",
-	"inner_wall_jerk": "9",
-	"inner_wall_speed": "150",
-	"internal_solid_infill_acceleration": "4000",
-	"internal_solid_infill_speed": "250",
-	"ironing_flow": "10%",
-	"outer_wall_acceleration": "2000",
-	"outer_wall_jerk": "9",
-	"outer_wall_speed": "60",
-	"overhang_4_4_speed": "10",
-	"prime_tower_width": "30",
-	"raft_first_layer_expansion": "5",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"seam_slope_conditional": "1",
-	"seam_slope_inner_walls": "1",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"sparse_infill_acceleration": "4000",
-	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "3dhoneycomb",
-	"sparse_infill_speed": "270",
-	"support_line_width": "0.42",
-	"support_threshold_angle": "30",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_solid_infill_flow_ratio": "0.97",
-	"top_surface_speed": "200",
-	"travel_acceleration": "4000",
-	"travel_jerk": "9",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wipe_on_loops": "0",
-	"wipe_tower_extra_spacing": "120%"
-}

resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -1,289 +0,0 @@
-{
-	"type": "process",
-	"name": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "K5se4jnf2XHJNkEQ",
-	"instantiation": "true",
-	"print_settings_id": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
-	"layer_height": "0.2",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "3",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "5000",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "0.9",
-	"bridge_no_support": "0",
-	"bridge_speed": "30",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.15",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "10000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "1",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "250",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400",
-	"infill_anchor_max": "20",
-	"infill_combination": "0",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "45",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.5",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.2",
-	"initial_layer_speed": "45",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "6000",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.45",
-	"inner_wall_speed": "200",
-	"interface_shells": "0",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "10000",
-	"internal_solid_infill_line_width": "0.42",
-	"internal_solid_infill_pattern": "zig-zag",
-	"internal_solid_infill_speed": "130",
-	"ironing_angle": "-1",
-	"ironing_flow": "15%",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.1",
-	"ironing_speed": "15",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"line_width": "0.42",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "5",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "5000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.42",
-	"outer_wall_speed": "130",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "50",
-	"overhang_3_4_speed": "30",
-	"overhang_4_4_speed": "10",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_width": "35",
-	"prime_volume": "20",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "0",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "0",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "1",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "30%",
-	"small_perimeter_threshold": "0",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "5000",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.45",
-	"sparse_infill_pattern": "3dhoneycomb",
-	"sparse_infill_speed": "300",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "0",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "0.2",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.2",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "-1",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.2",
-	"support_interface_speed": "100%",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.4",
-	"support_object_xy_distance": "60%",
-	"support_on_build_plate_only": "1",
-	"support_remove_small_overhang": "1",
-	"support_speed": "100",
-	"support_style": "default",
-	"support_threshold_angle": "30",
-	"support_top_z_distance": "0.25",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "0",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_shell_layers": "5",
-	"top_shell_thickness": "1",
-	"top_solid_infill_flow_ratio": "0.97",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.42",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "130",
-	"travel_acceleration": "10000",
-	"travel_jerk": "9",
-	"travel_speed": "350",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "40",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "5",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_double_wall": "3",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_infill_order": "inner wall/outer wall/infill",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_bridging": "10",
-	"wipe_tower_cone_angle": "15",
-	"wipe_tower_extra_spacing": "120%",
-	"wipe_tower_extruder": "0",
-	"wipe_tower_max_purge_speed": "90",
-	"wipe_tower_no_sparse_layers": "0",
-	"wipe_tower_rotation_angle": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}

resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -1,289 +0,0 @@
-{
-	"type": "process",
-	"name": "0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "cg8f6Q9o8nRePSC9",
-	"instantiation": "true",
-	"print_settings_id": "0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
-	"layer_height": "0.24",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "3",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "5000",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "0.9",
-	"bridge_no_support": "0",
-	"bridge_speed": "30",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.15",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "10000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "1",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "200",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400",
-	"infill_anchor_max": "10",
-	"infill_combination": "0",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "45",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.5",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.2",
-	"initial_layer_speed": "45",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "6000",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.45",
-	"inner_wall_speed": "200",
-	"interface_shells": "0",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "10000",
-	"internal_solid_infill_line_width": "0.45",
-	"internal_solid_infill_pattern": "zig-zag",
-	"internal_solid_infill_speed": "200",
-	"ironing_angle": "-1",
-	"ironing_flow": "10%",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.1",
-	"ironing_speed": "15",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"line_width": "0.42",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "5",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "5000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.42",
-	"outer_wall_speed": "120",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "50",
-	"overhang_3_4_speed": "30",
-	"overhang_4_4_speed": "10",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_width": "35",
-	"prime_volume": "20",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "0",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "0",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "1",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "30%",
-	"small_perimeter_threshold": "0",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "5000",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.45",
-	"sparse_infill_pattern": "3dhoneycomb",
-	"sparse_infill_speed": "200",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "0",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "0.2",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.2",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "-1",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.2",
-	"support_interface_speed": "100%",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.42",
-	"support_object_xy_distance": "60%",
-	"support_on_build_plate_only": "1",
-	"support_remove_small_overhang": "1",
-	"support_speed": "100",
-	"support_style": "default",
-	"support_threshold_angle": "35",
-	"support_top_z_distance": "0.2",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "1",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "15%",
-	"top_shell_layers": "4",
-	"top_shell_thickness": "1",
-	"top_solid_infill_flow_ratio": "0.97",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.42",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "180",
-	"travel_acceleration": "10000",
-	"travel_jerk": "9",
-	"travel_speed": "350",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "40",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "5",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_double_wall": "3",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_infill_order": "inner wall/outer wall/infill",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_bridging": "10",
-	"wipe_tower_cone_angle": "15",
-	"wipe_tower_extra_spacing": "120%",
-	"wipe_tower_extruder": "0",
-	"wipe_tower_max_purge_speed": "90",
-	"wipe_tower_no_sparse_layers": "0",
-	"wipe_tower_rotation_angle": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}

resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -1,24 +0,0 @@
-{
-	"type": "process",
-	"name": "0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
-	"inherits": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
-	"from": "system",
-	"setting_id": "DhqKrBJZh4W22xna",
-	"instantiation": "true",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"print_settings_id": "0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
-	"layer_height": "0.24",
-	"brim_type": "auto_brim",
-	"default_acceleration": "6000",
-	"default_jerk": "9",
-	"elefant_foot_compensation": "0.1",
-	"inner_wall_acceleration": "6000",
-	"inner_wall_jerk": "9",
-	"outer_wall_jerk": "9",
-	"raft_first_layer_expansion": "5",
-	"sparse_infill_acceleration": "6000",
-	"support_threshold_angle": "30",
-	"top_bottom_infill_wall_overlap": "15%",
-	"travel_acceleration": "10000",
-	"travel_jerk": "9"
-}

resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -1,289 +0,0 @@
-{
-	"type": "process",
-	"name": "0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "Qe8XQonRxfA8Jei1",
-	"instantiation": "true",
-	"print_settings_id": "0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
-	"layer_height": "0.28",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.4 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "3",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "2000",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "0.9",
-	"bridge_no_support": "0",
-	"bridge_speed": "30",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.15",
-	"brim_type": "auto_brim",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "10000",
-	"default_jerk": "9",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "1",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "200",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400",
-	"infill_anchor_max": "20",
-	"infill_combination": "0",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "45",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.5",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.2",
-	"initial_layer_speed": "45",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "6000",
-	"inner_wall_jerk": "9",
-	"inner_wall_line_width": "0.45",
-	"inner_wall_speed": "200",
-	"interface_shells": "0",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "10000",
-	"internal_solid_infill_line_width": "0.42",
-	"internal_solid_infill_pattern": "zig-zag",
-	"internal_solid_infill_speed": "180",
-	"ironing_angle": "-1",
-	"ironing_flow": "10%",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.1",
-	"ironing_speed": "15",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"line_width": "0.42",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "5",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "15",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "5000",
-	"outer_wall_jerk": "9",
-	"outer_wall_line_width": "0.42",
-	"outer_wall_speed": "120",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "50",
-	"overhang_3_4_speed": "30",
-	"overhang_4_4_speed": "10",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "0%",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_width": "35",
-	"prime_volume": "20",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "5",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "30",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "0",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "0",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "10%",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "1",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "30%",
-	"small_perimeter_threshold": "0",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "5000",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.45",
-	"sparse_infill_pattern": "grid",
-	"sparse_infill_speed": "200",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "0",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "0.2",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.2",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "-1",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.2",
-	"support_interface_speed": "100%",
-	"support_interface_top_layers": "2",
-	"support_line_width": "0.42",
-	"support_object_xy_distance": "60%",
-	"support_on_build_plate_only": "1",
-	"support_remove_small_overhang": "1",
-	"support_speed": "100",
-	"support_style": "default",
-	"support_threshold_angle": "40",
-	"support_top_z_distance": "0.2",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "1",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "25%",
-	"top_shell_layers": "4",
-	"top_shell_thickness": "1",
-	"top_solid_infill_flow_ratio": "0.97",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.42",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "180",
-	"travel_acceleration": "10000",
-	"travel_jerk": "9",
-	"travel_speed": "350",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "40",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "5",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_double_wall": "3",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_infill_order": "inner wall/outer wall/infill",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_bridging": "10",
-	"wipe_tower_cone_angle": "15",
-	"wipe_tower_extra_spacing": "120%",
-	"wipe_tower_extruder": "0",
-	"wipe_tower_max_purge_speed": "90",
-	"wipe_tower_no_sparse_layers": "0",
-	"wipe_tower_rotation_angle": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}

resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -1,289 +0,0 @@
-{
-	"type": "process",
-	"name": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "13ES5eks7VTR3G2E",
-	"instantiation": "true",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"print_settings_id": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
-	"layer_height": "0.3",
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.6 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "3",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "500",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "0.9",
-	"bridge_no_support": "0",
-	"bridge_speed": "30",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.15",
-	"brim_type": "outer_only",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "5000",
-	"default_jerk": "20",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "0",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.075",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "1",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "50",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400",
-	"infill_anchor_max": "10",
-	"infill_combination": "0",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "30",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.62",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.3",
-	"initial_layer_speed": "30",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "10000",
-	"inner_wall_jerk": "15",
-	"inner_wall_line_width": "0.62",
-	"inner_wall_speed": "150",
-	"interface_shells": "0",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "5000",
-	"internal_solid_infill_line_width": "0.62",
-	"internal_solid_infill_pattern": "monotonic",
-	"internal_solid_infill_speed": "150",
-	"ironing_angle": "-1",
-	"ironing_flow": "15%",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.1",
-	"ironing_speed": "15",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"line_width": "0.62",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "5",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "0",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "5000",
-	"outer_wall_jerk": "15",
-	"outer_wall_line_width": "0.62",
-	"outer_wall_speed": "120",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "50",
-	"overhang_3_4_speed": "15",
-	"overhang_4_4_speed": "10",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_width": "35",
-	"prime_volume": "20",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "2",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "35",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "1",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "0",
-	"seam_slope_min_length": "10",
-	"seam_slope_start_height": "0",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "1",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "50%",
-	"small_perimeter_threshold": "0",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "10000",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.62",
-	"sparse_infill_pattern": "3dhoneycomb",
-	"sparse_infill_speed": "100",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "0",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "0.2",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.2",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "-1",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.2",
-	"support_interface_speed": "80",
-	"support_interface_top_layers": "3",
-	"support_line_width": "0.62",
-	"support_object_xy_distance": "0.35",
-	"support_on_build_plate_only": "1",
-	"support_remove_small_overhang": "1",
-	"support_speed": "100",
-	"support_style": "default",
-	"support_threshold_angle": "40",
-	"support_top_z_distance": "0.25",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "1",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "25%",
-	"top_shell_layers": "3",
-	"top_shell_thickness": "0.6",
-	"top_solid_infill_flow_ratio": "0.97",
-	"top_surface_acceleration": "5000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.62",
-	"top_surface_pattern": "monotonicline",
-	"top_surface_speed": "150",
-	"travel_acceleration": "15000",
-	"travel_jerk": "12",
-	"travel_speed": "350",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "40",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "5",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_double_wall": "3",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "0.8",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_infill_order": "inner wall/outer wall/infill",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_bridging": "10",
-	"wipe_tower_cone_angle": "15",
-	"wipe_tower_extra_spacing": "150%",
-	"wipe_tower_extruder": "0",
-	"wipe_tower_max_purge_speed": "90",
-	"wipe_tower_no_sparse_layers": "0",
-	"wipe_tower_rotation_angle": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}

resources/profiles/Anycubic/process/0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -1,17 +0,0 @@
-{
-	"type": "process",
-	"name": "0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
-	"inherits": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
-	"from": "system",
-	"setting_id": "avPzsOBN3DnXTaol",
-	"instantiation": "true",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"print_settings_id": "0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
-	"layer_height": "0.32",
-	"initial_layer_print_height": "0.32",
-	"inner_wall_speed": "120",
-	"outer_wall_speed": "80",
-	"overhang_2_4_speed": "40",
-	"overhang_3_4_speed": "30",
-	"top_solid_infill_flow_ratio": "0.95"
-}

resources/profiles/Anycubic/process/0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -1,24 +0,0 @@
-{
-	"type": "process",
-	"name": "0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
-	"inherits": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
-	"from": "system",
-	"setting_id": "7pIVSig189FDjOMY",
-	"instantiation": "true",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"print_settings_id": "0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
-	"layer_height": "0.36",
-	"brim_type": "auto_brim",
-	"default_acceleration": "6000",
-	"default_jerk": "9",
-	"elefant_foot_compensation": "0.1",
-	"inner_wall_acceleration": "6000",
-	"inner_wall_jerk": "9",
-	"outer_wall_jerk": "9",
-	"raft_first_layer_expansion": "5",
-	"sparse_infill_acceleration": "6000",
-	"support_threshold_angle": "30",
-	"top_bottom_infill_wall_overlap": "15%",
-	"travel_acceleration": "10000",
-	"travel_jerk": "9"
-}

resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -1,289 +0,0 @@
-{
-	"type": "process",
-	"name": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "0yxg7c5tH07ZMIL4",
-	"instantiation": "true",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"print_settings_id": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
-	"layer_height": "0.4",
-	"compatible_printers": [
-		"Anycubic Kobra 3 V2 0.8 nozzle"
-	],
-	"accel_to_decel_enable": "1",
-	"accel_to_decel_factor": "50%",
-	"alternate_extra_wall": "0",
-	"bottom_shell_layers": "3",
-	"bottom_shell_thickness": "0",
-	"bottom_solid_infill_flow_ratio": "1",
-	"bottom_surface_pattern": "monotonic",
-	"bridge_acceleration": "5000",
-	"bridge_angle": "0",
-	"bridge_density": "100%",
-	"bridge_flow": "0.9",
-	"bridge_no_support": "0",
-	"bridge_speed": "30",
-	"brim_ears_detection_length": "1",
-	"brim_ears_max_angle": "125",
-	"brim_object_gap": "0.15",
-	"brim_type": "outer_only",
-	"brim_width": "5",
-	"compatible_printers_condition": "",
-	"counterbore_hole_bridging": "none",
-	"default_acceleration": "6000",
-	"default_jerk": "20",
-	"detect_narrow_internal_solid_infill": "1",
-	"detect_overhang_wall": "1",
-	"detect_thin_wall": "1",
-	"dont_filter_internal_bridges": "disabled",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0.1",
-	"elefant_foot_compensation_layers": "1",
-	"enable_arc_fitting": "0",
-	"enable_overhang_speed": "1",
-	"enable_prime_tower": "1",
-	"enable_support": "0",
-	"enforce_support_layers": "0",
-	"ensure_vertical_shell_thickness": "ensure_all",
-	"exclude_object": "1",
-	"extra_perimeters_on_overhangs": "1",
-	"filter_out_gap_fill": "0",
-	"flush_into_infill": "0",
-	"flush_into_objects": "0",
-	"flush_into_support": "1",
-	"fuzzy_skin": "none",
-	"fuzzy_skin_first_layer": "0",
-	"fuzzy_skin_point_distance": "0.8",
-	"fuzzy_skin_thickness": "0.3",
-	"gap_fill_target": "topbottom",
-	"gap_infill_speed": "50",
-	"gcode_add_line_number": "0",
-	"gcode_comments": "0",
-	"gcode_label_objects": "1",
-	"hole_to_polyhole": "0",
-	"hole_to_polyhole_threshold": "0.01",
-	"hole_to_polyhole_twisted": "1",
-	"independent_support_layer_height": "1",
-	"infill_anchor": "400",
-	"infill_anchor_max": "10",
-	"infill_combination": "0",
-	"infill_direction": "45",
-	"infill_jerk": "9",
-	"infill_wall_overlap": "15%",
-	"initial_layer_acceleration": "500",
-	"initial_layer_infill_speed": "30",
-	"initial_layer_jerk": "9",
-	"initial_layer_line_width": "0.82",
-	"initial_layer_min_bead_width": "85%",
-	"initial_layer_print_height": "0.4",
-	"initial_layer_speed": "30",
-	"initial_layer_travel_speed": "100%",
-	"inner_wall_acceleration": "0",
-	"inner_wall_jerk": "15",
-	"inner_wall_line_width": "0.82",
-	"inner_wall_speed": "150",
-	"interface_shells": "0",
-	"internal_bridge_flow": "1",
-	"internal_bridge_speed": "150%",
-	"internal_solid_infill_acceleration": "10000",
-	"internal_solid_infill_line_width": "0.82",
-	"internal_solid_infill_pattern": "zig-zag",
-	"internal_solid_infill_speed": "150",
-	"ironing_angle": "-1",
-	"ironing_flow": "15%",
-	"ironing_pattern": "zig-zag",
-	"ironing_spacing": "0.1",
-	"ironing_speed": "15",
-	"ironing_type": "no ironing",
-	"is_infill_first": "0",
-	"line_width": "0.82",
-	"make_overhang_printable": "0",
-	"make_overhang_printable_angle": "55",
-	"make_overhang_printable_hole_size": "0",
-	"max_bridge_length": "10",
-	"max_travel_detour_distance": "0",
-	"max_volumetric_extrusion_rate_slope": "0",
-	"max_volumetric_extrusion_rate_slope_segment_length": "5",
-	"min_bead_width": "85%",
-	"min_feature_size": "25%",
-	"min_length_factor": "0.5",
-	"min_width_top_surface": "300%",
-	"minimum_sparse_infill_area": "0",
-	"mmu_segmented_region_interlocking_depth": "0",
-	"mmu_segmented_region_max_width": "0",
-	"notes": "",
-	"only_one_wall_first_layer": "0",
-	"only_one_wall_top": "1",
-	"ooze_prevention": "0",
-	"outer_wall_acceleration": "5000",
-	"outer_wall_jerk": "15",
-	"outer_wall_line_width": "0.82",
-	"outer_wall_speed": "120",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "50",
-	"overhang_3_4_speed": "25",
-	"overhang_4_4_speed": "5",
-	"overhang_reverse": "0",
-	"overhang_reverse_internal_only": "0",
-	"overhang_reverse_threshold": "50%",
-	"post_process": [],
-	"precise_outer_wall": "0",
-	"precise_z_height": "0",
-	"prime_tower_brim_width": "5",
-	"prime_tower_width": "35",
-	"prime_volume": "20",
-	"print_flow_ratio": "1",
-	"print_order": "default",
-	"print_sequence": "by layer",
-	"raft_contact_distance": "0.1",
-	"raft_expansion": "1.5",
-	"raft_first_layer_density": "90%",
-	"raft_first_layer_expansion": "2",
-	"raft_layers": "0",
-	"reduce_crossing_wall": "0",
-	"reduce_infill_retraction": "1",
-	"resolution": "0.012",
-	"role_based_wipe_speed": "1",
-	"rotate_solid_infill_direction": "1",
-	"scarf_angle_threshold": "155",
-	"scarf_joint_flow_ratio": "1",
-	"scarf_joint_speed": "100%",
-	"scarf_overhang_threshold": "40%",
-	"seam_gap": "10%",
-	"seam_position": "aligned",
-	"seam_slope_conditional": "0",
-	"seam_slope_entire_loop": "0",
-	"seam_slope_inner_walls": "0",
-	"seam_slope_min_length": "20",
-	"seam_slope_start_height": "0",
-	"seam_slope_steps": "10",
-	"seam_slope_type": "none",
-	"single_extruder_multi_material_priming": "0",
-	"skirt_distance": "2",
-	"skirt_height": "1",
-	"skirt_loops": "0",
-	"skirt_speed": "50",
-	"slice_closing_radius": "0.049",
-	"slicing_mode": "regular",
-	"slow_down_layers": "1",
-	"slowdown_for_curled_perimeters": "0",
-	"small_area_infill_flow_compensation": "0",
-	"small_area_infill_flow_compensation_model": [
-		"0,0",
-		"\n0.2,0.4444",
-		"\n0.4,0.6145",
-		"\n0.6,0.7059",
-		"\n0.8,0.7619",
-		"\n1.5,0.8571",
-		"\n2,0.8889",
-		"\n3,0.9231",
-		"\n5,0.9520",
-		"\n10,1"
-	],
-	"small_perimeter_speed": "50%",
-	"small_perimeter_threshold": "0",
-	"solid_infill_direction": "45",
-	"solid_infill_filament": "1",
-	"sparse_infill_acceleration": "5000",
-	"sparse_infill_density": "15%",
-	"sparse_infill_filament": "1",
-	"sparse_infill_line_width": "0.82",
-	"sparse_infill_pattern": "3dhoneycomb",
-	"sparse_infill_speed": "100",
-	"spiral_mode": "0",
-	"spiral_mode_max_xy_smoothing": "200%",
-	"spiral_mode_smooth": "0",
-	"staggered_inner_seams": "0",
-	"standby_temperature_delta": "0",
-	"support_angle": "0",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "0.2",
-	"support_bottom_interface_spacing": "0.5",
-	"support_bottom_z_distance": "0.2",
-	"support_critical_regions_only": "0",
-	"support_expansion": "0",
-	"support_filament": "0",
-	"support_interface_bottom_layers": "-1",
-	"support_interface_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_not_for_body": "1",
-	"support_interface_pattern": "auto",
-	"support_interface_spacing": "0.2",
-	"support_interface_speed": "80",
-	"support_interface_top_layers": "3",
-	"support_line_width": "0.82",
-	"support_object_xy_distance": "0.35",
-	"support_on_build_plate_only": "1",
-	"support_remove_small_overhang": "1",
-	"support_speed": "100",
-	"support_style": "default",
-	"support_threshold_angle": "40",
-	"support_top_z_distance": "0.25",
-	"support_type": "tree(auto)",
-	"thick_bridges": "0",
-	"thick_internal_bridges": "1",
-	"timelapse_type": "0",
-	"top_bottom_infill_wall_overlap": "25%",
-	"top_shell_layers": "3",
-	"top_shell_thickness": "0.8",
-	"top_solid_infill_flow_ratio": "0.97",
-	"top_surface_acceleration": "2000",
-	"top_surface_jerk": "9",
-	"top_surface_line_width": "0.82",
-	"top_surface_pattern": "monotonic",
-	"top_surface_speed": "150",
-	"travel_acceleration": "10000",
-	"travel_jerk": "12",
-	"travel_speed": "350",
-	"travel_speed_z": "0",
-	"tree_support_adaptive_layer_height": "1",
-	"tree_support_angle_slow": "25",
-	"tree_support_auto_brim": "1",
-	"tree_support_branch_angle": "40",
-	"tree_support_branch_angle_organic": "40",
-	"tree_support_branch_diameter": "5",
-	"tree_support_branch_diameter_angle": "5",
-	"tree_support_branch_diameter_double_wall": "3",
-	"tree_support_branch_diameter_organic": "2",
-	"tree_support_branch_distance": "5",
-	"tree_support_branch_distance_organic": "1",
-	"tree_support_brim_width": "3",
-	"tree_support_tip_diameter": "1.5",
-	"tree_support_top_rate": "30%",
-	"tree_support_wall_count": "0",
-	"wall_direction": "auto",
-	"wall_distribution_count": "1",
-	"wall_filament": "1",
-	"wall_generator": "classic",
-	"wall_infill_order": "inner wall/outer wall/infill",
-	"wall_loops": "2",
-	"wall_sequence": "inner wall/outer wall",
-	"wall_transition_angle": "10",
-	"wall_transition_filter_deviation": "25%",
-	"wall_transition_length": "100%",
-	"wipe_before_external_loop": "0",
-	"wipe_on_loops": "0",
-	"wipe_speed": "80%",
-	"wipe_tower_bridging": "10",
-	"wipe_tower_cone_angle": "15",
-	"wipe_tower_extra_spacing": "150%",
-	"wipe_tower_extruder": "0",
-	"wipe_tower_max_purge_speed": "90",
-	"wipe_tower_no_sparse_layers": "0",
-	"wipe_tower_rotation_angle": "0",
-	"wiping_volumes_extruders": [
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70",
-		"70"
-	],
-	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
-}

resources/profiles/Anycubic/process/0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -1,17 +0,0 @@
-{
-	"type": "process",
-	"name": "0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
-	"inherits": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
-	"from": "system",
-	"setting_id": "2cCCPfRX7H33XrMb",
-	"instantiation": "true",
-	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
-	"print_settings_id": "0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
-	"layer_height": "0.48",
-	"initial_layer_print_height": "0.48",
-	"inner_wall_speed": "180",
-	"outer_wall_speed": "140",
-	"overhang_2_4_speed": "40",
-	"overhang_3_4_speed": "30",
-	"top_solid_infill_flow_ratio": "0.95"
-}

resources/profiles/BBL/filament/AliZ/AliZ PA-CF @P1-X1.json

@@ -3,7 +3,7 @@
 	"name": "AliZ PA-CF @P1-X1",
 	"inherits": "AliZ PA-CF @base",
 	"from": "system",
-	"setting_id": "cN0uesF0mZf3KSkj",
+	"setting_id": "AliZ003_00",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"

resources/profiles/BBL/filament/AliZ/AliZ PETG @P1-X1.json

@@ -3,7 +3,7 @@
 	"name": "AliZ PETG @P1-X1",
 	"inherits": "AliZ PETG @base",
 	"from": "system",
-	"setting_id": "cZp23cC4ong9q6dn",
+	"setting_id": "AliZ001_00",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"

resources/profiles/BBL/filament/AliZ/AliZ PETG-CF @P1-X1.json

@@ -3,7 +3,7 @@
 	"name": "AliZ PETG-CF @P1-X1",
 	"inherits": "AliZ PETG-CF @base",
 	"from": "system",
-	"setting_id": "HWW5mejsB0SfEfWw",
+	"setting_id": "AZ01-1_00",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"

resources/profiles/BBL/filament/AliZ/AliZ PETG-Metal @P1-X1.json

@@ -3,7 +3,7 @@
 	"name": "AliZ PETG-Metal @P1-X1",
 	"inherits": "AliZ PETG-Metal @base",
 	"from": "system",
-	"setting_id": "JqD0blE4fxaNfXqB",
+	"setting_id": "AZ01-2_00",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"

resources/profiles/BBL/filament/AliZ/AliZ PLA @P1-X1.json

@@ -3,7 +3,7 @@
 	"name": "AliZ PLA @P1-X1",
 	"inherits": "AliZ PLA @base",
 	"from": "system",
-	"setting_id": "fRELapY8YiP4qrBW",
+	"setting_id": "AliZ002_00",
 	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"

resources/profiles/BBL/filament/BETA/BETA ABS @BBL A1.json

@@ -3,7 +3,7 @@
 	"name": "BETA ABS @BBL A1",
 	"inherits": "BETA ABS @base",
 	"from": "system",
-	"setting_id": "dUGRrmxU89pRaJ2Z",
+	"setting_id": "BABB00_07",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"20"

resources/profiles/BBL/filament/BETA/BETA ABS @BBL H2D.json

@@ -3,7 +3,7 @@
 	"name": "BETA ABS @BBL H2D",
 	"inherits": "BETA ABS @base",
 	"from": "system",
-	"setting_id": "oxZKTEMd8TpyoH39",
+	"setting_id": "BABB00_11",
 	"instantiation": "true",
 	"chamber_temperatures": [
 		"65"

resources/profiles/BBL/filament/BETA/BETA ABS @BBL P1P.json

@@ -3,7 +3,7 @@
 	"name": "BETA ABS @BBL P1P",
 	"inherits": "BETA ABS @base",
 	"from": "system",
-	"setting_id": "MPYyfCKMsJZy8GaY",
+	"setting_id": "BABB00_03",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"20"

resources/profiles/BBL/filament/BETA/BETA ABS @BBL X1C.json

@@ -3,7 +3,7 @@
 	"name": "BETA ABS @BBL X1C",
 	"inherits": "BETA ABS @base",
 	"from": "system",
-	"setting_id": "vMA7EhgNDT4MwMRr",
+	"setting_id": "BABB00",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"60"

resources/profiles/BBL/filament/BETA/BETA ABS @base.json

@@ -0,0 +1,21 @@
+{
+	"type": "filament",
+	"name": "BETA ABS @base",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"filament_id": "OFjUXn67",
+	"instantiation": "false",
+	"description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
+	"filament_cost": [
+		"24.99"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_vendor": [
+		"BETA"
+	],
+	"impact_strength_z": [
+		"7.4"
+	]
+}