fix: restore presets that were renamed based on errors logged by workflow

.github/workflows/check_profiles.yml

@@ -63,11 +63,109 @@ jobs:
         continue-on-error: true
         working-directory: ${{ github.workspace }}
         run: |
-          set +e
-          curl -LJO https://github.com/OrcaSlicer/OrcaSlicer/releases/download/nightly-builds/orca_custom_preset_tests.zip
-          unzip -q ./orca_custom_preset_tests.zip -d ${{ github.workspace }}/resources/profiles
-          ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2 2>&1 | tee ${{ runner.temp }}/validate_custom.log
-          exit ${PIPESTATUS[0]}
+          fixtures_dir="${{ runner.temp }}/profile-fixtures"
+          output_dir="${{ runner.temp }}/custom-preset-validation"
+          combined_log="${{ runner.temp }}/validate_custom.log"
+          summary="${output_dir}/summary.md"
+          release_url="https://github.com/OrcaSlicer/OrcaSlicer-profile-validator/releases/download/fixture-archive"
+
+          rm -rf "${fixtures_dir}" "${output_dir}"
+          mkdir -p "${fixtures_dir}" "${output_dir}"
+
+          curl -fsSL -o "${fixtures_dir}/manifest.json" "${release_url}/manifest.json"
+
+          MANIFEST_PATH="${fixtures_dir}/manifest.json" python3 <<'PY' > "${fixtures_dir}/fixtures.tsv"
+          import json
+          import os
+
+          with open(os.environ["MANIFEST_PATH"], encoding="utf-8") as fh:
+              manifest = json.load(fh)
+
+          if isinstance(manifest, dict):
+              entries = manifest.get("fixtures", [])
+          else:
+              entries = manifest
+
+          for entry in entries:
+              version = entry.get("version", "")
+              asset = entry.get("asset", "")
+              sha256 = entry.get("asset_sha256", "")
+              if not version or not asset:
+                  continue
+              print(f"{version}\t{asset}\t{sha256}")
+          PY
+
+          if [ ! -s "${fixtures_dir}/fixtures.tsv" ]; then
+            echo "No custom preset fixtures found in ${release_url}/manifest.json" | tee "${combined_log}"
+            exit 1
+          fi
+
+          {
+            echo "## Custom Preset Fixture Validation"
+            echo ""
+            echo "| Version | Status | Log |"
+            echo "| --- | --- | --- |"
+          } > "${summary}"
+
+          status=0
+          failed_logs=()
+
+          while IFS=$'\t' read -r version asset expected_sha256; do
+            fixture_zip="${fixtures_dir}/${asset}"
+            asset_url_name="$(python3 -c 'import sys, urllib.parse; print(urllib.parse.quote(sys.argv[1], safe=""))' "${asset}")"
+            profile_tree="${output_dir}/profiles-${version}"
+            log_path="${output_dir}/${version}.log"
+
+            curl -fsSL -o "${fixture_zip}" "${release_url}/${asset_url_name}"
+
+            if [ -n "${expected_sha256}" ] && [ "${expected_sha256}" != "<sha256>" ]; then
+              echo "${expected_sha256}  ${fixture_zip}" | sha256sum -c -
+            fi
+
+            rm -rf "${profile_tree}"
+            mkdir -p "${profile_tree}"
+            cp -a "${{ github.workspace }}/resources/profiles/." "${profile_tree}/"
+            rm -rf "${profile_tree}/user"
+            unzip -q "${fixture_zip}" -d "${profile_tree}"
+
+            set +e
+            ./OrcaSlicer_profile_validator -p "${profile_tree}" -l 2 > "${log_path}" 2>&1
+            result=$?
+            set -e
+
+            if [ "${result}" -eq 0 ]; then
+              echo "| ${version} | PASS | ${version}.log |" >> "${summary}"
+            else
+              echo "| ${version} | FAIL | ${version}.log |" >> "${summary}"
+              failed_logs+=("${log_path}")
+              status=1
+            fi
+          done < "${fixtures_dir}/fixtures.tsv"
+
+          {
+            cat "${summary}"
+            if [ "${#failed_logs[@]}" -gt 0 ]; then
+              echo ""
+              echo "## Failed Fixture Logs"
+              for log_path in "${failed_logs[@]}"; do
+                echo ""
+                echo "### $(basename "${log_path}" .log)"
+                echo '```'
+                head -c 12000 "${log_path}" || echo "No output captured"
+                echo '```'
+              done
+            fi
+          } | tee "${combined_log}"
+
+          exit "${status}"
+
+      - name: Upload custom preset validation logs
+        if: ${{ always() }}
+        uses: actions/upload-artifact@v7
+        with:
+          name: custom-preset-validation-logs
+          path: ${{ runner.temp }}/custom-preset-validation/
+          retention-days: 7
 
       - name: Prepare PR number for comment workflow
         if: ${{ always() && github.event_name == 'pull_request' }}

resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL A1",
+	"renamed_from": "Panchroma PLA Stain @BBL A1",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_00",

resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1M.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL A1M",
+	"renamed_from": "Panchroma PLA Stain @BBL A1M",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_02",

resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL P1P.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL P1P",
+	"renamed_from": "Panchroma PLA Stain @BBL P1P",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_04",

resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Panchroma PLA Satin @BBL X1",
+	"renamed_from": "Panchroma PLA Stain @BBL X1",
 	"inherits": "Panchroma PLA Satin @base",
 	"from": "system",
 	"setting_id": "GFSPM005_06",

resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json

@@ -1,6 +1,7 @@
 {
 	"type": "process",
 	"name": "0.20mm Standard @BBL X1C",
+	"renamed_from": "0.20mm Bambu Support W @BBL X1C",
 	"inherits": "fdm_process_single_0.20",
 	"from": "system",
 	"setting_id": "GP004",

resources/profiles/Ginger Additive/filament/Ginger Generic PETG.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Ginger Generic PETG",
+	"renamed_from": "Ginger Generic rPETG",
 	"inherits": "fdm_filament_common",
 	"from": "system",
 	"setting_id": "ue95N2e65rdp5K6c",

resources/profiles/Ginger Additive/filament/Ginger Generic PLA.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Ginger Generic PLA",
+	"renamed_from": "Ginger Generic rPLA",
 	"inherits": "fdm_filament_common",
 	"from": "system",
 	"setting_id": "Z1scjKDBFoDaTa2C",

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Impact @System.json

@@ -1,6 +1,7 @@
 {
 	"type": "filament",
 	"name": "Bambu PLA Impact @System",
+	"renamed_from": "Bambu PLA Impact @BBL X1C",
 	"inherits": "Bambu PLA Impact @base",
 	"from": "system",
 	"setting_id": "1qdr65SvIErZzxN3",

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG PRO @System.json

@@ -18,5 +18,5 @@
 		"5"
 	],
 	"compatible_printers": [],
-	"renamed_from": "Elegoo PETG PRO"
+	"renamed_from": "Elegoo PETG PRO;Elegoo PETG Pro @System"
 }

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo Rapid PETG @System.json

@@ -33,5 +33,5 @@
 		"250"
 	],
 	"compatible_printers": [],
-	"renamed_from": "Elegoo Rapid PETG;Elegoo Rapid PETG+"
+	"renamed_from": "Elegoo Rapid PETG;Elegoo Rapid PETG+;Elegoo RAPID PETG;Elegoo RAPID PETG+"
 }

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo Rapid PLA+ @System.json

@@ -45,5 +45,5 @@
 		"; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
 	],
 	"compatible_printers": [],
-	"renamed_from": "Elegoo Rapid PLA+"
+	"renamed_from": "Elegoo Rapid PLA+;Elegoo RAPID PLA+"
 }