feat: add OrcaCloud webview pane and session handoff from the app

Its inline suggestions rarely apply: clang-tidy adds a missing include
to the include block at the top of the file, which a PR seldom touches,
and GitHub only accepts review suggestions on lines in the PR's diff.

resources/images/score_star_outline.svg

@@ -0,0 +1,3 @@
+<svg width="28" height="27" viewBox="0 0 28 27" fill="none" xmlns="http://www.w3.org/2000/svg">
+<path transform="matrix(0.9 0 0 0.9 1.4 1.35)" d="M11.9888 2.01601C12.8984 0.494662 15.1024 0.494662 16.012 2.01601L18.8677 6.79237C19.1958 7.34113 19.7339 7.73201 20.3572 7.87447L25.7821 9.11446C27.5101 9.50943 28.1913 11.6056 27.0254 12.9408L23.3652 17.1327C22.9449 17.6143 22.7394 18.2469 22.7964 18.8836L23.2936 24.4263C23.4519 26.1918 21.6687 27.4873 20.0386 26.7911L14.9209 24.6056C14.3329 24.3545 13.6679 24.3545 13.0799 24.6056L7.96209 26.7911C6.33196 27.4873 4.54887 26.1918 4.70722 24.4263L5.20434 18.8836C5.26145 18.2469 5.05595 17.6143 4.63544 17.1327L0.97533 12.9408C-0.19048 11.6056 0.490599 9.50943 2.21859 9.11446L7.64364 7.87447C8.2669 7.73201 8.80494 7.34113 9.13302 6.79237L11.9888 2.01601Z" stroke="#949494" stroke-width="2.4" stroke-linejoin="round"/>
+</svg>

resources/profiles/Qidi.json

@@ -1,6 +1,6 @@
 {
 	"name": "Qidi",
-	"version": "02.04.00.16",
+	"version": "02.04.00.17",
 	"force_update": "0",
 	"description": "Qidi configurations",
 	"machine_model_list": [

resources/profiles/Qidi/machine/Qidi Q1 Pro 0.4 nozzle.json

@@ -83,7 +83,7 @@
 	"extruder_clearance_height_to_lid": "120",
 	"layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nLOG_Z\nG92 E0\n",
 	"machine_end_gcode": "M141 S0\nM104 S0\nM140 S0\nG1 E-3 F1800\nG0 Z{min(max_print_height, max_layer_z + 3)} F600\nG0 X0 Y0 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}",
-	"machine_start_gcode": "PRINT_START BED=[hot_plate_temp_initial_layer] HOTEND=[nozzle_temperature_initial_layer] CHAMBER=[chamber_temperature]\nM83\nM140 S[hot_plate_temp_initial_layer]\nM104 S[nozzle_temperature_initial_layer]\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0) + 3} Z0\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0) + 6}\nG1 Z1 F600\n",
+	"machine_start_gcode": "PRINT_START BED=[bed_temperature_initial_layer_single] HOTEND=[nozzle_temperature_initial_layer] CHAMBER=[chamber_temperature]\nM83\nM140 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0) + 3} Z0\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0) + 6}\nG1 Z1 F600\n",
 	"thumbnails_format": "PNG",
 	"default_filament_profile": [
 		"Generic PLA @Qidi Q1 Pro 0.4 nozzle"

resources/profiles/Qidi/machine/Qidi X-CF Pro 0.4 nozzle.json

@@ -100,7 +100,7 @@
 	"default_filament_profile": [
 		"Generic PLA @Qidi"
 	],
-	"machine_start_gcode": "G28\nM140 S[hot_plate_temp_initial_layer]\nM190 S[hot_plate_temp_initial_layer]\nM109 S[nozzle_temperature_initial_layer]\nG92 E-19\nG0 Y5 Z0.3 F3600\nG1 X5 E0 F2400\n",
+	"machine_start_gcode": "G28\nM140 S[bed_temperature_initial_layer_single]\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nG92 E-19\nG0 Y5 Z0.3 F3600\nG1 X5 E0 F2400\n",
 	"machine_end_gcode": "M104 S0\nM140 S0\n;Retract the filament\nG92 E0\nG1 E-3 F300\nG28\nM84\n",
 	"scan_first_layer": "0"
 }

resources/profiles/Qidi/machine/fdm_qidi_x3_common.json

@@ -24,7 +24,7 @@
 		"210x210/COLPIC",
 		"110x110/PNG"
 	],
-	"machine_start_gcode": "PRINT_START\nG28\nM141 S0\nG0 Z50 F600\nM190 S[hot_plate_temp_initial_layer]\nG28 Z\nG29; mesh bed leveling ,comment this code to close it\nG0 X0 Y0 Z50 F6000\nM141 S{overall_chamber_temperature}\nM109 S[nozzle_temperature_initial_layer]\nM106 P3 S255\nM83\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 12} E{-10 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 E{10 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\n",
+	"machine_start_gcode": "PRINT_START\nG28\nM141 S0\nG0 Z50 F600\nM190 S[bed_temperature_initial_layer_single]\nG28 Z\nG29; mesh bed leveling ,comment this code to close it\nG0 X0 Y0 Z50 F6000\nM141 S{overall_chamber_temperature}\nM109 S[nozzle_temperature_initial_layer]\nM106 P3 S255\nM83\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 12} E{-10 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 E{10 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\n",
 	"machine_end_gcode": "M141 S0\nM104 S0\nM140 S0\nG1 E-3 F1800\nG0 Z{min(max_print_height, max_layer_z + 3)} F600\nG0 X0 Y0 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}",
 	"scan_first_layer": "0"
 }

resources/web/homepage/css/home.css

@@ -548,6 +548,20 @@ body
 	overflow-y:auto;
 }
 
+/*---- Cloud mode: OrcaCloud is a native pane to the right of the app panel, so this page
+      is reduced to its left nav column (the class is toggled by SetCloudMode in js/home.js). ----*/
+body.cloud-mode #RightBoard
+{
+	display: none;
+}
+
+body.cloud-mode #LeftBoard
+{
+	/*---- 262px of column plus its 1px separator is the width the app gives the nav. ----*/
+	height: 100%;
+	overflow-y: auto;
+}
+
 #ContentBoard
 {
 	overflow-y:auto;

resources/web/homepage/index.html

@@ -90,7 +90,7 @@
 			<div class="BtnIcon "><img class="LeftIcon" src="img/i2.png" /></div>
 			<div data-i18n="recent">Recent</div> 
 		</div>
-	    <div class="BtnItem BtnShortcut" onClick="OpenUrlInLocalBrowser('https://cloud.orcaslicer.com')">
+	    <div class="BtnItem BtnShortcut" onClick="GotoCloud()">
 			<div class="BtnIcon "><img class="ShortcutBrandIcon" src="../image/logo.png" /></div>
 			<div class="ShortcutTextRow">
 				<div>OrcaCloud</div>

resources/web/homepage/js/home.js

@@ -145,8 +145,36 @@ function HandleStudio( pVal )
   }
 }
 
+/*---- OrcaCloud opens as a native pane beside this page, so the shell only switches its
+      own cloud-mode state and asks the app to show or hide that pane (WebViewPanel::set_cloud_mode). ----*/
+var m_CloudMode=false;
+
+function SetCloudMode( bOn )
+{
+	if( m_CloudMode==bOn )
+		return;
+
+	m_CloudMode=bOn;
+	$("body").toggleClass("cloud-mode", bOn);
+}
+
+function GotoCloud()
+{
+	$(".BtnItem").removeClass("BtnItemSelected");
+	$(".BtnShortcut").addClass("BtnItemSelected");
+	SetCloudMode(true);
+	SendSimpleCommand("homepage_open_cloud");
+}
+
 function GotoMenu( strMenu )
 {
+	/*---- Any board in the right region means leaving the cloud pane. ----*/
+	if( m_CloudMode )
+	{
+		SetCloudMode(false);
+		SendSimpleCommand("homepage_close_cloud");
+	}
+
 	let MenuList=$(".BtnItem");
 	let nAll=MenuList.length;
 	

src/libslic3r/Format/bbs_3mf.cpp

@@ -1729,8 +1729,8 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result)
             //plate->pattern_file = it->second->pattern_file;
             plate->no_light_thumbnail_file = it->second->no_light_thumbnail_file;
             plate->top_file = it->second->top_file;
-            plate->pick_file = it->second->pick_file.empty();
-            plate->pattern_bbox_file = it->second->pattern_bbox_file.empty();
+            plate->pick_file = it->second->pick_file;
+            plate->pattern_bbox_file = it->second->pattern_bbox_file;
             plate->config = it->second->config;
 
             if (!plate->thumbnail_file.empty())

src/libslic3r/GCode.cpp

@@ -3295,7 +3295,7 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato
     m_is_role_based_fan_on.fill(false);
     m_role_based_fan_marker_layer.fill(-1);
 
-    m_fan_mover.release();
+    m_fan_mover.reset();
     m_ordering_cache.clear();
 
     // Belt printer: initialize belt-specific writer via virtual hook.

src/slic3r/GUI/AMSMaterialsSetting.cpp

@@ -16,6 +16,7 @@
 #include <wx/checklst.h>
 #include "slic3r/GUI/GUI_Utils.hpp"
 #include "slic3r/GUI/Widgets/Button.hpp"
+#include "slic3r/GUI/Widgets/DropDown.hpp"
 #include "slic3r/GUI/Widgets/Label.hpp"
 #include <utility>
 #include "slic3r/GUI/wxExtensions.hpp"
@@ -172,7 +173,26 @@ void AMSMaterialsSetting::create()
 
     Bind(wxEVT_PAINT, &AMSMaterialsSetting::paintEvent, this);
     Bind(EVT_SELECTED_COLOR, &AMSMaterialsSetting::on_picker_color, this);
-     m_comboBox_filament->Connect(wxEVT_COMMAND_COMBOBOX_SELECTED, wxCommandEventHandler(AMSMaterialsSetting::on_select_filament), NULL, this);
+    m_comboBox_filament->Connect(wxEVT_COMMAND_COMBOBOX_SELECTED, wxCommandEventHandler(AMSMaterialsSetting::on_select_filament), NULL, this);
+    m_comboBox_filament->Bind(EVT_DROPDOWN_ITEM_ACTION, &AMSMaterialsSetting::on_toggle_favorite_filament, this);
+
+    // Favorites toggled in the open list are regrouped just before it opens again, so rows never move
+    // under the cursor. These handlers run ahead of ComboBox's own, which then measure and show the
+    // rebuilt rows; wxEVT_COMBOBOX_DROPDOWN would be too late, as ComboBox sends it after showing the list.
+    auto regroup_favorites = [this]() {
+        if (!m_favorites_regroup || m_comboBox_filament->is_drop_down())
+            return;
+        const FilamentInfos* info        = selected_filament_info();
+        const std::string    filament_id = info ? info->filament_id : std::string();
+        rebuild_filament_dropdown_items(filament_id);
+    };
+    m_comboBox_filament->Bind(wxEVT_LEFT_DOWN, [regroup_favorites](wxMouseEvent& e) { regroup_favorites(); e.Skip(); });
+    m_comboBox_filament->Bind(wxEVT_LEFT_DCLICK, [regroup_favorites](wxMouseEvent& e) { regroup_favorites(); e.Skip(); });
+    m_comboBox_filament->Bind(wxEVT_KEY_DOWN, [regroup_favorites](wxKeyEvent& e) {
+        if (e.GetKeyCode() == WXK_RETURN || e.GetKeyCode() == WXK_SPACE) // the keys that open the list
+            regroup_favorites();
+        e.Skip();
+    });
 
     m_comboBox_cali_result->Connect(wxEVT_COMMAND_COMBOBOX_SELECTED, wxCommandEventHandler(AMSMaterialsSetting::on_select_cali_result), NULL, this);
 }
@@ -191,11 +211,9 @@ void AMSMaterialsSetting::create_panel_normal(wxWindow* parent)
 
     m_sizer_filament->Add(0, 0, 0, wxEXPAND, 0);
 
-#ifdef __APPLE__
-    m_comboBox_filament = new wxComboBox(parent, wxID_ANY, wxEmptyString, wxDefaultPosition, AMS_MATERIALS_SETTING_COMBOX_WIDTH, 0, nullptr, wxCB_READONLY);
-#else
     m_comboBox_filament = new ::ComboBox(parent, wxID_ANY, wxEmptyString, wxDefaultPosition, AMS_MATERIALS_SETTING_COMBOX_WIDTH, 0, nullptr, wxCB_READONLY);
-#endif
+    m_star_filled = ScalableBitmap(this, "score_star_light", 16);
+    m_star_empty  = ScalableBitmap(this, "score_star_outline", 16);
 
     m_sizer_filament->Add(m_comboBox_filament, 1, wxALIGN_CENTER, 0);
 
@@ -420,6 +438,7 @@ void AMSMaterialsSetting::paintEvent(wxPaintEvent &evt)
 AMSMaterialsSetting::~AMSMaterialsSetting()
 {
     m_comboBox_filament->Disconnect(wxEVT_COMMAND_COMBOBOX_SELECTED, wxCommandEventHandler(AMSMaterialsSetting::on_select_filament), NULL, this);
+    m_comboBox_filament->Unbind(EVT_DROPDOWN_ITEM_ACTION, &AMSMaterialsSetting::on_toggle_favorite_filament, this);
     m_comboBox_cali_result->Disconnect(wxEVT_COMMAND_COMBOBOX_SELECTED, wxCommandEventHandler(AMSMaterialsSetting::on_select_cali_result), NULL, this);
 }
 
@@ -531,10 +550,9 @@ void AMSMaterialsSetting::on_select_reset(wxCommandEvent& event) {
     std::string   selected_ams_id;
     PresetBundle *preset_bundle = wxGetApp().preset_bundle;
     if (preset_bundle) {
+        const FilamentInfos* selected_info = selected_filament_info();
         for (auto it = preset_bundle->filaments.begin(); it != preset_bundle->filaments.end(); it++) {
-            auto        filament_item = map_filament_items[m_comboBox_filament->GetValue().ToStdString()];
-            std::string filament_id   = filament_item.filament_id;
-            if (it->filament_id.compare(filament_id) == 0) {
+            if (selected_info && it->filament_id.compare(selected_info->filament_id) == 0) {
                 selected_ams_id = it->filament_id;
                 break;
             }
@@ -682,12 +700,13 @@ void AMSMaterialsSetting::on_select_ok(wxCommandEvent &event)
     ams_setting_id = "";
 
     // the combobox item
-    auto filament_item = map_filament_items[m_comboBox_filament->GetValue().ToStdString()];
+    const FilamentInfos* selected_info = selected_filament_info();
+    const std::string    filament_id   = selected_info ? selected_info->filament_id : std::string();
 
     // check filament info (rack-gated per-nozzle blacklist evaluation)
     PresetBundle* preset_bundle = wxGetApp().preset_bundle;
     const auto& fila_check_res = sCheckFilamentInfo(preset_bundle, obj, ams_id, slot_id,
-                                                    filament_item.filament_id, ams_filament_id, ams_setting_id);
+                                                    filament_id, ams_filament_id, ams_setting_id);
 
     if (const auto& prohibit_items = fila_check_res.get_items_by_action("prohibition"); !prohibit_items.empty()) {
         wxString info_msg;
@@ -986,6 +1005,133 @@ static void _collect_filament_info(const wxString& shown_name,
     query_filament_types[shown_name] = filament.config.get_filament_type();
 }
 
+static const char* AMS_FAVORITE_FILAMENT_IDS_KEY = "ams_favorite_filament_ids";
+
+const AMSMaterialsSetting::FilamentInfos* AMSMaterialsSetting::selected_filament_info() const
+{
+    const int selection = m_comboBox_filament->GetSelection();
+    if (selection < 0 || selection >= int(m_filament_list_items.size()) || !m_filament_list_items[selection].is_filament)
+        return nullptr;
+    return &m_filament_list_items[selection].filament;
+}
+
+std::set<std::string> AMSMaterialsSetting::load_favorite_filament_ids() const
+{
+    std::set<std::string> favorite_ids;
+    std::vector<std::string> values;
+    const std::string serialized = wxGetApp().app_config->get(AMS_FAVORITE_FILAMENT_IDS_KEY);
+    if (!serialized.empty() && Slic3r::unescape_strings_cstyle(serialized, values)) {
+        favorite_ids.insert(values.begin(), values.end());
+    }
+    return favorite_ids;
+}
+
+void AMSMaterialsSetting::save_favorite_filament_ids(const std::set<std::string>& favorite_ids)
+{
+    std::vector<std::string> values(favorite_ids.begin(), favorite_ids.end());
+    wxGetApp().app_config->set(AMS_FAVORITE_FILAMENT_IDS_KEY, Slic3r::escape_strings_cstyle(values));
+    wxGetApp().app_config->save();
+}
+
+void AMSMaterialsSetting::rebuild_filament_dropdown_items(const std::string& selected_filament_id)
+{
+    std::vector<DropDown::Item> items;
+    m_filament_list_items.clear();
+
+    auto append_header = [&items, this](const wxString& label) {
+        DropDown::Item item;
+        item.text = label;
+        item.style = DD_ITEM_STYLE_SPLIT_ITEM | DD_ITEM_STYLE_DISABLED;
+        items.push_back(item);
+        m_filament_list_items.push_back(FilamentListItem{});
+    };
+
+    auto append_filament = [&items, this](const wxString& name) {
+        auto info_it = map_filament_items.find(name);
+        if (info_it == map_filament_items.end())
+            return;
+
+        DropDown::Item item;
+        item.text = name;
+        items.push_back(item);
+        m_filament_list_items.push_back(FilamentListItem{info_it->second, true});
+    };
+
+    // Favorites are listed again at the top under their own header. Without any, the list is the
+    // plain filament list.
+    const std::set<std::string> favorite_ids = load_favorite_filament_ids();
+    std::vector<wxString>       favorites;
+    for (const wxString& name : m_sorted_filament_items) {
+        auto info_it = map_filament_items.find(name);
+        if (info_it != map_filament_items.end() && favorite_ids.count(info_it->second.filament_id) > 0)
+            favorites.push_back(name);
+    }
+    if (!favorites.empty()) {
+        append_header(_L("Favorite filaments"));
+        for (const wxString& name : favorites)
+            append_filament(name);
+        append_header(_L("All filaments"));
+    }
+    for (const wxString& name : m_sorted_filament_items)
+        append_filament(name);
+
+    int selection_idx = -1;
+    if (!selected_filament_id.empty()) {
+        for (int i = 0; i < int(m_filament_list_items.size()); ++i) {
+            if (m_filament_list_items[i].is_filament && m_filament_list_items[i].filament.filament_id == selected_filament_id) {
+                selection_idx = i;
+                break;
+            }
+        }
+    }
+
+    // Clear() first: SetItems() keeps the old selection, and SetSelection() ignores an index equal to it,
+    // which would leave the previous filament's name on the combo.
+    m_comboBox_filament->Clear();
+    m_comboBox_filament->SetItems(items);
+    update_favorite_stars();
+    m_comboBox_filament->SetSelection(selection_idx);
+    m_favorites_regroup = false;
+}
+
+void AMSMaterialsSetting::update_favorite_stars()
+{
+    const std::set<std::string> favorite_ids = load_favorite_filament_ids();
+    for (size_t i = 0; i < m_filament_list_items.size(); ++i) {
+        const FilamentListItem& row = m_filament_list_items[i];
+        if (row.is_filament) {
+            const bool favorite = favorite_ids.count(row.filament.filament_id) > 0;
+            m_comboBox_filament->SetItemActionBitmap(i, favorite ? m_star_filled.bmp() : m_star_empty.bmp());
+        }
+    }
+}
+
+void AMSMaterialsSetting::toggle_favorite_filament(const std::string& filament_id)
+{
+    if (filament_id.empty())
+        return;
+
+    std::set<std::string> favorite_ids = load_favorite_filament_ids();
+    auto iter = favorite_ids.find(filament_id);
+    if (iter == favorite_ids.end())
+        favorite_ids.insert(filament_id);
+    else
+        favorite_ids.erase(iter);
+
+    save_favorite_filament_ids(favorite_ids);
+}
+
+void AMSMaterialsSetting::on_toggle_favorite_filament(wxCommandEvent& evt)
+{
+    const int index = evt.GetInt();
+    if (index < 0 || index >= int(m_filament_list_items.size()) || !m_filament_list_items[index].is_filament)
+        return;
+
+    toggle_favorite_filament(m_filament_list_items[index].filament.filament_id);
+    update_favorite_stars();
+    m_favorites_regroup = true;
+}
+
 void AMSMaterialsSetting::Popup(wxString filament, wxString sn, wxString temp_min, wxString temp_max, wxString k, wxString n)
 {
     if (!obj) return;
@@ -999,13 +1145,12 @@ void AMSMaterialsSetting::Popup(wxString filament, wxString sn, wxString temp_mi
     m_input_k_val->GetTextCtrl()->SetValue(k);
     m_input_n_val->GetTextCtrl()->SetValue(n);
 
-    wxArrayString filament_items;
     wxString bambu_filament_name;
-    wxString hint_filament_name; // the hint type to be selected
     std::unordered_map<wxString, wxString> query_filament_vendors;// some information for sort
     std::unordered_map<wxString, wxString> query_filament_types;  //
 
     std::set<std::string> filament_id_set;
+    m_sorted_filament_items.clear();
     // The alias keyed map has to start empty: it is a member, so a stale alias left by an earlier
     // popup (a different printer, a different nozzle) would resolve to that printer's filament_id.
     map_filament_items.clear();
@@ -1035,7 +1180,7 @@ void AMSMaterialsSetting::Popup(wxString filament, wxString sn, wxString temp_mi
             if (alias.empty())
                 continue;
 
-            filament_items.push_back(alias);
+            m_sorted_filament_items.push_back(alias);
             _collect_filament_info(alias, *filament_it, query_filament_vendors, query_filament_types);
 
             FilamentInfos filament_infos;
@@ -1044,7 +1189,6 @@ void AMSMaterialsSetting::Popup(wxString filament, wxString sn, wxString temp_mi
             map_filament_items[alias]  = filament_infos;
 
             if (filament_it->filament_id == ams_filament_id) {
-                hint_filament_name = from_u8(alias);
                 bambu_filament_name = from_u8(alias);
 
 
@@ -1215,24 +1359,11 @@ void AMSMaterialsSetting::Popup(wxString filament, wxString sn, wxString temp_mi
             return name_compare != 0 ? name_compare < 0 : left < right;
         };
 
-        std::sort(filament_items.begin(), filament_items.end(), _filament_sorter);
+        std::sort(m_sorted_filament_items.begin(), m_sorted_filament_items.end(), _filament_sorter);
     }
 
-    // traverse the hint selection idx
-    int selection_idx = -1;
-    {
-        for(int i = 0; i < filament_items.size(); i++)
-        {
-            if (hint_filament_name == filament_items[i])
-            {
-                selection_idx = i;
-                break;
-            }
-        }
-    }
-
-    m_comboBox_filament->Set(filament_items);
-    m_comboBox_filament->SetSelection(selection_idx);
+    rebuild_filament_dropdown_items(ams_filament_id);
+    int selection_idx = m_comboBox_filament->GetSelection();
     post_select_event(selection_idx);
 
     if (selection_idx < 0) {
@@ -1289,6 +1420,7 @@ void AMSMaterialsSetting::on_select_filament(wxCommandEvent &evt)
     int* from_printer = static_cast<int*>(m_comboBox_filament->GetClientData());
 
     m_filament_type = "";
+    const FilamentInfos* selected_info = selected_filament_info();
     PresetBundle* preset_bundle = wxGetApp().preset_bundle;
     if (preset_bundle) {
         std::ostringstream stream;
@@ -1309,9 +1441,8 @@ void AMSMaterialsSetting::on_select_filament(wxCommandEvent &evt)
         std::string nozzle_diameter_str = stream.str();
         // Resolve the selection against the same list Popup() built the dropdown from, so the two
         // halves of the dialog cannot disagree about which filaments this machine can use.
-        const std::string selected = m_comboBox_filament->GetValue().ToStdString();
-        if (!selected.empty()) {
-            const std::string filament_id = map_filament_items[selected].filament_id;
+        if (selected_info) {
+            const std::string& filament_id = selected_info->filament_id;
             for (Preset *it : preset_bundle->get_filament_presets_for_machine(
                      DevPrinterConfigUtil::get_printer_display_name(obj->printer_type), nozzle_diameter_str, obj->is_support_user_preset)) {
                 if (it->filament_id != filament_id)
@@ -1364,7 +1495,7 @@ void AMSMaterialsSetting::on_select_filament(wxCommandEvent &evt)
     //reset cali
     int cali_select_idx = -1;
 
-    if ( !this->obj || m_filament_selection < 0) {
+    if ( !this->obj || m_filament_selection < 0 || !selected_info) {
         m_input_k_val->Enable(false);
         m_input_n_val->Enable(false);
         m_button_confirm->Disable(); // ORCA No need to change style
@@ -1383,21 +1514,9 @@ void AMSMaterialsSetting::on_select_filament(wxCommandEvent &evt)
     ams_filament_id = "";
     ams_setting_id = "";
 
-    if (preset_bundle) {
-        for (auto it = preset_bundle->filaments.begin(); it != preset_bundle->filaments.end(); it++) {
-            auto itor = map_filament_items.find(m_comboBox_filament->GetValue().ToStdString());
-            if ( itor != map_filament_items.end()) {
-                ams_filament_id = itor->second.filament_id;
-                ams_setting_id  = itor->second.setting_id;
-                break;
-            }
-
-            if (it->alias.compare(m_comboBox_filament->GetValue().ToStdString()) == 0) {
-                ams_filament_id = it->filament_id;
-                ams_setting_id = it->setting_id;
-                break;
-            }
-        }
+    if (selected_info) {
+        ams_filament_id = selected_info->filament_id;
+        ams_setting_id  = selected_info->setting_id;
     }
 
     wxArrayString items;
@@ -1529,6 +1648,11 @@ void AMSMaterialsSetting::on_dpi_changed(const wxRect &suggested_rect)
     m_button_reset->Rescale(); // ORCA
     m_button_confirm->Rescale(); // ORCA
     m_button_close->Rescale(); // ORCA
+    // An open list would keep the measurements of the old stars, so close it before replacing them.
+    m_comboBox_filament->CloseDropdown();
+    m_star_filled.msw_rescale();
+    m_star_empty.msw_rescale();
+    update_favorite_stars();
     this->Refresh();
 }
 

src/slic3r/GUI/AMSMaterialsSetting.hpp

@@ -31,6 +31,7 @@
 #include "slic3r/GUI/Widgets/StateColor.hpp"
 #include <wx/panel.h>
 #include <map>
+#include <set>
 
 #define AMS_MATERIALS_SETTING_DEF_COLOUR wxColour(255, 255, 255)
 #define AMS_MATERIALS_SETTING_GREY900 wxColour(38, 46, 48)
@@ -156,6 +157,7 @@ protected:
     void create_panel_kn(wxWindow* parent);
     void on_dpi_changed(const wxRect &suggested_rect) override;
     void on_select_filament(wxCommandEvent& evt);
+    void on_toggle_favorite_filament(wxCommandEvent& evt);
     void on_select_cali_result(wxCommandEvent &evt);
     void on_select_ok(wxCommandEvent &event);
     void on_select_reset(wxCommandEvent &event);
@@ -163,6 +165,11 @@ protected:
     void on_clr_picker(wxMouseEvent &event);
     bool is_virtual_tray();
     void update_widgets();
+    void rebuild_filament_dropdown_items(const std::string& selected_filament_id);
+    void update_favorite_stars();
+    std::set<std::string> load_favorite_filament_ids() const;
+    void save_favorite_filament_ids(const std::set<std::string>& favorite_ids);
+    void toggle_favorite_filament(const std::string& filament_id);
 
     void update_filament_editing(bool is_printing);
     // Orca: the variant index of the filament's per-variant options on the nozzle this tray feeds
@@ -202,12 +209,7 @@ protected:
 
     int m_pa_cali_select_id = 0;
 
-// Orca: native wxComboBox on macOS (the custom ComboBox mis-renders the filament dropdown there)
-#ifdef __APPLE__
-    wxComboBox *m_comboBox_filament;
-#else
     ComboBox *m_comboBox_filament;
-#endif
     ComboBox * m_comboBox_cali_result;
     TextInput*       m_readonly_filament;
 
@@ -215,7 +217,20 @@ protected:
         std::string filament_id;
         std::string setting_id;
     };
-    std::map<std::string, FilamentInfos> map_filament_items;
+    struct FilamentListItem {
+        FilamentInfos filament;
+        bool          is_filament{false};
+    };
+    const FilamentInfos* selected_filament_info() const;
+
+    // Keyed by the same wxString the dropdown shows, so a row's name never has to be converted back.
+    std::map<wxString, FilamentInfos>    map_filament_items;
+    std::vector<wxString>                m_sorted_filament_items;
+    std::vector<FilamentListItem>        m_filament_list_items;
+    ScalableBitmap                       m_star_filled;
+    ScalableBitmap                       m_star_empty;
+    // Favorites changed while the list was open; their rows are regrouped before it opens again.
+    bool                                 m_favorites_regroup{false};
 };
 
 wxDECLARE_EVENT(EVT_SELECTED_COLOR, wxCommandEvent);

src/slic3r/GUI/GUI_App.cpp

@@ -3232,9 +3232,16 @@ bool GUI_App::on_init_inner()
 #ifdef _MSW_DARK_MODE
 
 #ifndef __WINDOWS__
+    // The label colours and the dark mode flag were set above from the saved mode. When the system theme
+    // differs from it, refresh them, or dialogs that map their colours stay in the old mode for this session.
+    const bool saved_dark_mode = dark_mode();
     wxSystemAppearance app = wxSystemSettings::GetAppearance();
     GUI::wxGetApp().app_config->set("dark_color_mode", app.IsDark() ? "1" : "0");
     GUI::wxGetApp().app_config->save();
+    if (dark_mode() != saved_dark_mode) {
+        init_label_colours();
+        Update_dark_mode_flag();
+    }
 #endif // __APPLE__
 
 
@@ -5412,6 +5419,20 @@ std::string GUI_App::handle_web_request(std::string cmd)
             else if (command_str.compare("homepage_openproject") == 0) {
                 this->request_open_project({});
             }
+            else if (command_str.compare("homepage_open_cloud") == 0) {
+                // Deferred: set_cloud_mode() may create a second native webview, which must
+                // not run inside this webview's script-message callback.
+                CallAfter([this]() {
+                    if (WebViewPanel* home = WebViewPanel::if_built())
+                        home->set_cloud_mode(true, cloud_webview_handoff());
+                });
+            }
+            else if (command_str.compare("homepage_close_cloud") == 0) {
+                CallAfter([]() {
+                    if (WebViewPanel* home = WebViewPanel::if_built())
+                        home->set_cloud_mode(false);
+                });
+            }
             else if (command_str.compare("get_recent_projects") == 0) {
                 if (mainframe) {
                     if (WebViewPanel* home = WebViewPanel::if_built()) {
@@ -5828,6 +5849,22 @@ void GUI_App::on_update_machine_list(wxCommandEvent &evt)
      }*/
 }
 
+wxString GUI_App::cloud_webview_handoff()
+{
+    auto orca = m_agent ? std::dynamic_pointer_cast<OrcaCloudServiceAgent>(m_agent->get_cloud_agent()) : nullptr;
+    if (!orca || !orca->is_user_login())
+        return {};
+    // Never block the UI thread on a token refresh: that can take a cross-process lock plus a
+    // synchronous POST and retry. If the access token is missing or within a minute of expiry,
+    // skip the handoff for this open — set_cloud_mode then loads the plain cloud page and the next
+    // open retries. The pane is the app's guest: the app owns the session and re-injects a
+    // freshly-refreshed copy on each open (Supabase rotates refresh tokens, so a concurrent
+    // refresh by the SPA can invalidate the app's copy — a known, accepted trade-off).
+    if (orca->access_token_needs_refresh(std::chrono::seconds(60)))
+        return {};
+    return from_u8(orca->build_webview_handoff_url());
+}
+
 void GUI_App::on_user_login_handle(wxCommandEvent &evt)
 {
     if (!m_agent) { return; }
@@ -5883,6 +5920,12 @@ void GUI_App::on_user_login_handle(wxCommandEvent &evt)
     if (app_config->get("sync_user_preset") == "true") {
         start_sync_user_preset();
     }
+
+    // Re-seed the embedded OrcaCloud pane if it is already open, so it picks up the new session
+    // without waiting for the next open. A closed pane is seeded when it is next opened.
+    if (WebViewPanel* home = WebViewPanel::if_built())
+        if (home->cloud_mode_active())
+            home->set_cloud_mode(true, cloud_webview_handoff());
 }
 
 

src/slic3r/GUI/GUI_App.hpp

@@ -557,6 +557,9 @@ public:
     void            on_update_machine_list(wxCommandEvent& evt);
     void            on_user_login(wxCommandEvent &evt);
     void            on_user_login_handle(wxCommandEvent& evt);
+    // Returns the fragment handoff URL for the signed-in Orca Cloud session, refreshing the
+    // token first if needed. Empty when not signed in.
+    wxString        cloud_webview_handoff();
     void            enable_user_preset_folder(bool enable);
 
     // BBS

src/slic3r/GUI/GUI_ObjectList.cpp

@@ -1617,7 +1617,7 @@ void ObjectList::list_manipulation(const wxPoint& mouse_pos, bool evt_context_me
             int obj_idx, vol_idx;
             get_selected_item_indexes(obj_idx, vol_idx, item);
             if (obj_idx != -1) {
-                Plater::TakeSnapshot(plater, _u8L("Shift objects to bed"));
+                Plater::TakeSnapshot snapshot(plater, _u8L("Shift objects to bed"));
                 (*m_objects)[obj_idx]->ensure_on_bed();
                 cnv->reload_scene(true, true);
                 update_info_items(obj_idx);
@@ -2779,12 +2779,13 @@ void ObjectList::del_info_item(const int obj_idx, InfoItemType type)
     GLCanvas3D* cnv = plater->canvas3D();
 
     switch (type) {
-    case InfoItemType::CustomSupports:
+    case InfoItemType::CustomSupports: {
         cnv->get_gizmos_manager().reset_all_states();
-        Plater::TakeSnapshot(plater, "Remove support painting");
+        Plater::TakeSnapshot snapshot(plater, "Remove support painting");
         for (ModelVolume* mv : (*m_objects)[obj_idx]->volumes)
             mv->supported_facets.reset();
         break;
+    }
 
     // BBS: remove CustomSeam
 
@@ -2795,19 +2796,21 @@ void ObjectList::del_info_item(const int obj_idx, InfoItemType type)
         }
         break;
 
-    case InfoItemType::MmSegmentation:
+    case InfoItemType::MmSegmentation: {
         cnv->get_gizmos_manager().reset_all_states();
-        Plater::TakeSnapshot(plater, "Remove color painting");
+        Plater::TakeSnapshot snapshot(plater, "Remove color painting");
         for (ModelVolume* mv : (*m_objects)[obj_idx]->volumes)
             mv->mmu_segmentation_facets.reset();
         break;
+    }
 
-    case InfoItemType::FuzzySkin:
+    case InfoItemType::FuzzySkin: {
         cnv->get_gizmos_manager().reset_all_states();
-        Plater::TakeSnapshot(plater, _u8L("Remove paint-on fuzzy skin"));
+        Plater::TakeSnapshot snapshot(plater, _u8L("Remove paint-on fuzzy skin"));
         for (ModelVolume* mv : (*m_objects)[obj_idx]->volumes)
             mv->fuzzy_skin_facets.reset();
         break;
+    }
 
     // BBS: remove Sinking
     case InfoItemType::Undef : assert(false); break;
@@ -6718,7 +6721,7 @@ void ObjectList::OnEditingStarted(wxDataViewEvent &event)
     else if (col == colSinking) {
         Plater *    plater = wxGetApp().plater();
         GLCanvas3D *cnv    = plater->canvas3D();
-        Plater::TakeSnapshot(plater, _u8L("Shift objects to bed"));
+        Plater::TakeSnapshot snapshot(plater, _u8L("Shift objects to bed"));
         int obj_idx, vol_idx;
         get_selected_item_indexes(obj_idx, vol_idx, item);
         (*m_objects)[obj_idx]->ensure_on_bed();

src/slic3r/GUI/WebViewDialog.cpp

@@ -55,6 +55,13 @@ namespace GUI {
 
     #define LOGIN_INFO_UPDATE_TIMER_ID 10002
 
+// OrcaCloud is a native pane of its own: the site refuses to be framed
+// (x-frame-options: DENY / CSP frame-ancestors 'none').
+static const char *const kCloudUrl = "https://cloud.orcaslicer.com";
+// #LeftBoard in resources/web/homepage/css/home.css is a 262px column plus a 1px right
+// border; the homepage keeps that width as the nav column while the cloud pane is open.
+static const int kLeftNavWidth = 263;
+
 // The home page's strings (resources/web/homepage), keyed by their data-i18n and T() ids.
 static json home_page_strings()
 {
@@ -134,7 +141,11 @@ WebViewPanel::WebViewPanel(wxWindow *parent)
     m_reset_on_show = WebView::NeedsRecreateOnShow();
     SetSizer(topsizer);
 
-    topsizer->Add(m_browser, wxSizerFlags().Expand().Proportion(1));
+    // The homepage shell is the left nav column; when OrcaCloud opens, its page lives in a
+    // second native pane beside it (the site refuses to be framed).
+    m_content_sizer = new wxBoxSizer(wxHORIZONTAL);
+    m_content_sizer->Add(m_browser, wxSizerFlags().Expand().Proportion(1));
+    topsizer->Add(m_content_sizer, wxSizerFlags().Expand().Proportion(1));
 
     // Log backend information
     /* m_browser->GetUserAgent() may lead crash
@@ -290,12 +301,98 @@ void WebViewPanel::create_browser()
     m_browser->Hide();
 }
 
+// The cloud page gets its own native view, created on first use and kept alive afterwards
+// so its session and scroll position survive hiding.
+void WebViewPanel::create_cloud_browser()
+{
+    m_cloud_browser = WebView::CreateWebView(this, wxEmptyString);
+
+    // Webview events are command events, so they would otherwise propagate up to the
+    // panel's handlers, which drive the homepage view. Keep the cloud pane's events here.
+    m_cloud_browser->Bind(wxEVT_WEBVIEW_NAVIGATING, &WebViewPanel::OnCloudWebViewEvent, this);
+    m_cloud_browser->Bind(wxEVT_WEBVIEW_NAVIGATED, &WebViewPanel::OnCloudWebViewEvent, this);
+    m_cloud_browser->Bind(wxEVT_WEBVIEW_LOADED, &WebViewPanel::OnCloudWebViewEvent, this);
+    m_cloud_browser->Bind(wxEVT_WEBVIEW_TITLE_CHANGED, &WebViewPanel::OnCloudWebViewEvent, this);
+    m_cloud_browser->Bind(wxEVT_WEBVIEW_ERROR, &WebViewPanel::OnCloudWebViewEvent, this);
+    m_cloud_browser->Bind(wxEVT_WEBVIEW_NEWWINDOW, &WebViewPanel::OnCloudWebViewEvent, this);
+    m_cloud_browser->Bind(wxEVT_WEBVIEW_SCRIPT_MESSAGE_RECEIVED, &WebViewPanel::OnCloudWebViewEvent, this);
+
+    m_cloud_browser->Hide();
+    if (m_content_sizer)
+        m_content_sizer->Add(m_cloud_browser, wxSizerFlags().Expand().Proportion(1));
+}
+
+// Consumed on the cloud view so it never reaches the homepage handlers; new windows open in
+// the system browser, the same way PrinterWebView treats them.
+void WebViewPanel::OnCloudWebViewEvent(wxWebViewEvent& evt)
+{
+    if (evt.GetEventType() == wxEVT_WEBVIEW_NEWWINDOW) {
+        const wxString url = evt.GetURL();
+        if (!url.empty())
+            wxLaunchDefaultBrowser(url);
+        evt.Veto();
+    }
+}
+
+void WebViewPanel::apply_cloud_layout(bool cloud_on)
+{
+    if (!m_content_sizer)
+        return;
+
+    // Cloud mode pins the homepage to the nav column width; otherwise it fills the panel.
+    if (m_browser) {
+        if (wxSizerItem* item = m_content_sizer->GetItem(m_browser))
+            item->SetProportion(cloud_on ? 0 : 1);
+        // kLeftNavWidth is in DIP: the web view's CSS px are DIP, so scale to physical pixels.
+        m_browser->SetMinSize(cloud_on ? m_browser->FromDIP(wxSize(kLeftNavWidth, -1)) : wxDefaultSize);
+    }
+    Layout();
+}
+
+void WebViewPanel::set_cloud_mode(bool on, const wxString& url)
+{
+    if (on) {
+        if (!m_cloud_browser) {
+            create_cloud_browser();
+            if (url.empty()) {
+                WebView::LoadUrl(m_cloud_browser, wxString(kCloudUrl));
+            } else {
+                // Load the handoff directly: WebView::LoadUrl re-serializes through wxURI, which
+                // could alter the fragment that carries the session.
+                m_cloud_browser->LoadURL(url);
+            }
+        } else if (!url.empty()) {
+            // Re-inject a freshly-refreshed session whenever the pane is (re)opened.
+            m_cloud_browser->LoadURL(url);
+        }
+        m_cloud_browser->Show();
+    } else if (m_cloud_browser) {
+        m_cloud_browser->Hide();
+        // Supabase scrubs with window.location.hash='', so the token fragment can remain in
+        // history; drop it when the pane is closed.
+        m_cloud_browser->ClearHistory();
+    }
+    apply_cloud_layout(on && m_cloud_browser != nullptr);
+}
+
 void WebViewPanel::reset_browser()
 {
+    // Rebuild both views the same way, keeping the cloud pane's open/closed state.
+    const bool cloud_on = m_cloud_browser && m_cloud_browser->IsShown();
+
     m_browser->Destroy(); // also removes it from the sizer
     create_browser();
-    GetSizer()->Add(m_browser, wxSizerFlags().Expand().Proportion(1));
-    Layout();
+    m_content_sizer->Insert(size_t(0), m_browser, wxSizerFlags().Expand().Proportion(1));
+
+    if (m_cloud_browser) {
+        m_cloud_browser->Destroy();
+        m_cloud_browser = nullptr;
+        create_cloud_browser();
+        WebView::LoadUrl(m_cloud_browser, kCloudUrl);
+        m_cloud_browser->Show(cloud_on);
+    }
+
+    apply_cloud_layout(cloud_on);
 }
 
 bool WebViewPanel::Show(bool show)
@@ -645,7 +742,7 @@ void WebViewPanel::update_mode()
     */
 void WebViewPanel::OnNavigationRequest(wxWebViewEvent& evt)
 {
-    BOOST_LOG_TRIVIAL(trace) << __FUNCTION__ << ": " << evt.GetURL().ToUTF8().data();
+    BOOST_LOG_TRIVIAL(trace) << __FUNCTION__ << ": " << WebView::RedactUrl(evt.GetURL()).ToUTF8().data();
     const wxString &url = evt.GetURL();
     if (url.StartsWith("File://") || url.StartsWith("file://")) {
         if (!url.Contains("/web/homepage/index.html")) {
@@ -691,7 +788,7 @@ void WebViewPanel::OnNavigationComplete(wxWebViewEvent& evt)
 {
     m_browser->Show();
     Layout();
-    BOOST_LOG_TRIVIAL(trace) << __FUNCTION__ << ": " << evt.GetURL().ToUTF8().data();
+    BOOST_LOG_TRIVIAL(trace) << __FUNCTION__ << ": " << WebView::RedactUrl(evt.GetURL()).ToUTF8().data();
     if (wxGetApp().get_mode() == comDevelop)
         wxLogMessage("%s", "Navigation complete; url='" + evt.GetURL() + "'");
     UpdateState();
@@ -710,6 +807,9 @@ void WebViewPanel::OnDocumentLoaded(wxWebViewEvent& evt)
         if (wxGetApp().get_mode() == comDevelop)
             wxLogMessage("%s", "Document loaded; url='" + evt.GetURL() + "'");
     }
+    // A reloaded homepage loses its cloud-mode class; restore it if the pane is open.
+    if (m_cloud_browser && m_cloud_browser->IsShown())
+        RunScript("SetCloudMode(true)");
     UpdateState();
     SendCloudProvidersInfo();
 }
@@ -725,7 +825,7 @@ void WebViewPanel::OnTitleChanged(wxWebViewEvent &evt)
     */
 void WebViewPanel::OnNewWindow(wxWebViewEvent& evt)
 {
-    BOOST_LOG_TRIVIAL(trace) << __FUNCTION__ << ": " << evt.GetURL().ToUTF8().data();
+    BOOST_LOG_TRIVIAL(trace) << __FUNCTION__ << ": " << WebView::RedactUrl(evt.GetURL()).ToUTF8().data();
     wxString flag = " (other)";
 
     if (evt.GetNavigationAction() == wxWEBVIEW_NAV_ACTION_USER)

src/slic3r/GUI/WebViewDialog.hpp

@@ -28,6 +28,7 @@
 #include "wx/fs_mem.h"
 #include "wx/stdpaths.h"
 #include <wx/panel.h>
+#include <wx/sizer.h>
 #include <wx/tbarbase.h>
 #include "wx/textctrl.h"
 #include <wx/timer.h>
@@ -114,12 +115,27 @@ public:
 
     void update_mode();
 
+    // Shows/hides the native OrcaCloud pane beside this homepage nav column. When the pane is
+    // created, or when `on` is true with a non-empty `url`, that URL is loaded (the fragment
+    // carries a Supabase session handoff); `url` empty falls back to the cloud home page.
+    void set_cloud_mode(bool on, const wxString& url = wxString());
+
+    // True while the OrcaCloud pane exists and is visible.
+    bool cloud_mode_active() const { return m_cloud_browser && m_cloud_browser->IsShown(); }
+
     bool Show(bool show = true) override;
 private:
     void create_browser();
+    void create_cloud_browser();
     void reset_browser();
+    // Consumes the cloud pane's webview events so they stay off the homepage handlers.
+    void OnCloudWebViewEvent(wxWebViewEvent& evt);
+    // Re-applies the content sizer's proportions and min sizes for the cloud state.
+    void apply_cloud_layout(bool cloud_on);
 
     wxWebView* m_browser;
+    wxWebView* m_cloud_browser{nullptr};
+    wxBoxSizer* m_content_sizer{nullptr};
     wxString m_home_url;
     bool m_reset_on_show{false};
     wxButton *  m_button_stop;

src/slic3r/GUI/Widgets/ComboBox.cpp

@@ -82,6 +82,11 @@ ComboBox::ComboBox(wxWindow *parent,
         e.SetId(GetId());
         GetEventHandler()->ProcessEvent(e);
     });
+    drop.Bind(EVT_DROPDOWN_ITEM_ACTION, [this](wxCommandEvent &e) {
+        e.SetEventObject(this);
+        e.SetId(GetId());
+        GetEventHandler()->ProcessEvent(e);
+    });
     drop.Bind(EVT_DISMISS, [this](auto &) {
         drop_down = false;
         wxCommandEvent e(wxEVT_COMBOBOX_CLOSEUP);
@@ -251,7 +256,7 @@ int ComboBox::Append(const wxString &text,
                      int style)
 {
     auto valid_bit_map = bitmap.IsOk() ? bitmap : wxNullBitmap;
-    Item item{text, wxEmptyString, valid_bit_map, valid_bit_map, clientData, group_key, group_label};
+    Item item{text, wxEmptyString, valid_bit_map, valid_bit_map, wxNullBitmap, clientData, group_key, group_label};
     item.style = style;
     items.push_back(item);
     SetClientDataType(wxClientData_Void);
@@ -297,6 +302,12 @@ void ComboBox::ForceDropdownOpen()
     }
 }
 
+void ComboBox::CloseDropdown()
+{
+    if (drop.IsShown())
+        drop.DismissAndNotify();
+}
+
 unsigned int ComboBox::GetCount() const { return items.size(); }
 
 void ComboBox::set_replace_text(wxString text, wxString image_name)
@@ -350,6 +361,13 @@ void ComboBox::SetItemBitmap(unsigned int n, wxBitmap const &bitmap)
     drop.Invalidate();
 }
 
+void ComboBox::SetItemActionBitmap(unsigned int n, wxBitmap const &bitmap)
+{
+    if (n >= items.size()) return;
+    items[n].action_icon = bitmap.IsOk() ? bitmap : wxNullBitmap;
+    drop.Invalidate();
+}
+
 int ComboBox::DoInsertItems(const wxArrayStringsAdapter &items,
                             unsigned int                 pos,
                             void **                      clientData,
@@ -357,7 +375,7 @@ int ComboBox::DoInsertItems(const wxArrayStringsAdapter &items,
 {
     if (pos > this->items.size()) return -1;
     for (int i = 0; i < items.GetCount(); ++i) {
-        Item item { items[i], wxEmptyString, wxNullBitmap, wxNullBitmap, clientData ? clientData[i] : NULL };
+        Item item { items[i], wxEmptyString, wxNullBitmap, wxNullBitmap, wxNullBitmap, clientData ? clientData[i] : NULL };
         this->items.insert(this->items.begin() + pos, item);
         ++pos;
     }
@@ -419,16 +437,18 @@ void ComboBox::keyDown(wxKeyEvent& event)
         case WXK_UP:
         case WXK_DOWN:
         case WXK_LEFT:
-        case WXK_RIGHT:
-            if ((event.GetKeyCode() == WXK_UP || event.GetKeyCode() == WXK_LEFT) && GetSelection() > 0) {
-                SetSelection(GetSelection() - 1);
-            } else if ((event.GetKeyCode() == WXK_DOWN || event.GetKeyCode() == WXK_RIGHT) && GetSelection() + 1 < items.size()) {
-                SetSelection(GetSelection() + 1);
-            } else {
+        case WXK_RIGHT: {
+            // Step over disabled rows: the mouse cannot select them either.
+            const int step = (event.GetKeyCode() == WXK_UP || event.GetKeyCode() == WXK_LEFT) ? -1 : 1;
+            int       n    = GetSelection() + step;
+            while (n >= 0 && n < int(items.size()) && (items[n].style & DD_ITEM_STYLE_DISABLED))
+                n += step;
+            if (n < 0 || n >= int(items.size()))
                 break;
-            }
+            SetSelection(n);
             sendComboBoxEvent();
             break;
+        }
         case WXK_TAB:
             HandleAsNavigationKey(event);
             break;

src/slic3r/GUI/Widgets/ComboBox.hpp

@@ -96,10 +96,12 @@ public:
 
     wxBitmap GetItemBitmap(unsigned int n);
     void     SetItemBitmap(unsigned int n, wxBitmap const &bitmap);
+    void     SetItemActionBitmap(unsigned int n, wxBitmap const &bitmap);
     bool     is_drop_down(){return drop_down;}
     void     DeleteOneItem(unsigned int pos) { DoDeleteOneItem(pos); }
 
     void ForceDropdownOpen();
+    void CloseDropdown();
 
 protected:
     virtual int  DoInsertItems(const wxArrayStringsAdapter &items,

src/slic3r/GUI/Widgets/DropDown.cpp

@@ -30,6 +30,7 @@
 #include "slic3r/GUI/wxExtensions.hpp"
 
 wxDEFINE_EVENT(EVT_DISMISS, wxCommandEvent);
+wxDEFINE_EVENT(EVT_DROPDOWN_ITEM_ACTION, wxCommandEvent);
 
 BEGIN_EVENT_TABLE(DropDown, PopupWindow)
 
@@ -242,6 +243,19 @@ static wxSize GetBmpSize(wxBitmap & bmp)
 #endif
 }
 
+// The x-range [first, second) of the column at the right of the rows that holds the items' action
+// icons, empty when no item has one. render() draws the icons in it and mouseReleased() hit-tests
+// clicks against it, so the drawn icon and its clickable area always match.
+std::pair<int, int> DropDown::actionColumn() const
+{
+    if (actionIconWidth <= 0)
+        return {0, 0};
+    int right = rowSize.x;
+    if (rowSize.y * count > GetSize().y) // position bar
+        right -= 6;
+    return {right - actionIconWidth - FromDIP(16), right};
+}
+
 static void _DrawSplitItem(const wxWindow* w, wxDC& dc, wxString split_text, wxPoint start_pt, int item_width, int item_height)
 {
     // save dc
@@ -371,6 +385,10 @@ void DropDown::render(wxDC &dc)
         rcContent.width -= szBmp.x + 5;
     }
 
+    const auto action_column = actionColumn();
+    if (action_column.second > action_column.first)
+        rcContent.width = action_column.first - rcContent.x;
+
     std::set<wxString> groups;
     // draw texts & icons
     int index = 0;
@@ -434,13 +452,24 @@ void DropDown::render(wxDC &dc)
         auto text = group.IsEmpty()
                         ? (item.group_key.IsEmpty() ? item.text : item.group_label)
                         : item.text;
+        if (item.action_icon.IsOk()) {
+            auto action_size = GetBmpSize(item.action_icon);
+            wxPoint action_pt(action_column.second - action_size.x - FromDIP(8),
+                              rcContent.y + (rcContent.height - action_size.y) / 2);
+            dc.DrawBitmap(item.action_icon, action_pt);
+        }
+
         if (!text_off && !text.IsEmpty()) {
             wxSize tSize = dc.GetMultiLineTextExtent(text);
             if (pt.x + tSize.x > rcContent.GetRight()) {
-                if (is_hover && item.tip.IsEmpty())
-                    SetToolTip(text);
-                text = wxControl::Ellipsize(text, dc, wxELLIPSIZE_END,
-                                            rcContent.GetRight() - pt.x);
+                int max_text_width = rcContent.GetRight() - pt.x;
+                if (max_text_width <= 0) {
+                    text.clear();
+                } else {
+                    if (is_hover && item.tip.IsEmpty())
+                        SetToolTip(text);
+                    text = wxControl::Ellipsize(text, dc, wxELLIPSIZE_END, max_text_width);
+                }
             }
             pt.y += (rcContent.height - textSize.y) / 2;
             dc.SetFont(GetFont());
@@ -529,6 +558,7 @@ void DropDown::messureSize()
     if (!need_sync) return;
     textSize = wxSize();
     iconSize = wxSize();
+    actionIconWidth = 0;
     count = 0;
     wxClientDC dc(GetParent() ? GetParent() : this);
     dc.SetFont(GetFont());
@@ -565,8 +595,13 @@ void DropDown::messureSize()
                 size1.x += size2.x + (text_off ? 0 : 5);
             }
         }
+        if (item.action_icon.IsOk())
+            actionIconWidth = std::max(actionIconWidth, GetBmpSize(item.action_icon).x);
         if (size1.x > textSize.x) textSize = size1;
     }
+    // Every row leaves room for the action column, as render() and actionColumn() lay it out.
+    if (actionIconWidth > 0)
+        textSize.x += actionIconWidth + FromDIP(16);
     if (!align_icon) iconSize.x = 0;
     wxSize szContent = textSize;
     if (szContent.x < FromDIP(120) && !use_content_width)
@@ -636,6 +671,11 @@ void DropDown::messureSize()
             e.SetId(GetId());
             GetEventHandler()->ProcessEvent(e);
         });
+        subDropDown->Bind(EVT_DROPDOWN_ITEM_ACTION, [this](wxCommandEvent &e) {
+            e.SetEventObject(this);
+            e.SetId(GetId());
+            GetEventHandler()->ProcessEvent(e);
+        });
     }
     need_sync = false;
 }
@@ -714,6 +754,15 @@ void DropDown::mouseReleased(wxMouseEvent& event)
         if (hover_item < 0)
             return;
         if (hover_item >= 0 && (subDropDown == nullptr || subDropDown->group.empty())) { // not moved
+            int index = hoverIndex();
+            if (index >= 0 && items[index].action_icon.IsOk()) {
+                const auto action_column = actionColumn();
+                if (event.GetX() >= action_column.first && event.GetX() < action_column.second) {
+                    sendDropDownActionEvent(index);
+                    paintNow();
+                    return;
+                }
+            }
             sendDropDownEvent();
             if (mainDropDown)
                 mainDropDown->hover_item = -1; // To Dismiss mainDropDown
@@ -830,6 +879,17 @@ void DropDown::sendDropDownEvent()
     GetEventHandler()->ProcessEvent(event);
 }
 
+void DropDown::sendDropDownActionEvent(int index)
+{
+    if (index < 0 || index >= int(items.size()) || (items[index].style & DD_ITEM_STYLE_DISABLED))
+        return;
+    wxCommandEvent event(EVT_DROPDOWN_ITEM_ACTION, GetId());
+    event.SetEventObject(this);
+    event.SetInt(index);
+    event.SetString(items[index].text);
+    GetEventHandler()->ProcessEvent(event);
+}
+
 void DropDown::Dismiss()
 {
     if (subDropDown && subDropDown->IsShown())

src/slic3r/GUI/Widgets/DropDown.hpp

@@ -5,6 +5,7 @@
 #include <wx/event.h>
 #include <vector>
 #include <cstddef>
+#include <utility>
 #include <wx/gdicmn.h>
 #include "slic3r/GUI/Widgets/StateColor.hpp"
 #include <boost/date_time/posix_time/ptime.hpp>
@@ -27,6 +28,7 @@ class wxWindow;
 #define DD_ITEM_STYLE_DIMMED      0x0004 // gray text, but still selectable
 
 wxDECLARE_EVENT(EVT_DISMISS, wxCommandEvent);
+wxDECLARE_EVENT(EVT_DROPDOWN_ITEM_ACTION, wxCommandEvent);
 
 class DropDown : public PopupWindow
 {
@@ -37,6 +39,7 @@ public:
         wxString text_static_tips;// display static tips for TextInput.eg.PrinterInfoBox
         wxBitmap icon;
         wxBitmap icon_textctrl;// display icon for TextInput.eg.PrinterInfoBox
+        wxBitmap action_icon;
         void *   data{nullptr};
         wxString group_key{};
         wxString group_label{};
@@ -65,6 +68,7 @@ private:
 
     wxSize textSize;
     wxSize iconSize;
+    int    actionIconWidth = 0;
     wxSize rowSize;
 
     StateHandler state_handler;
@@ -135,6 +139,7 @@ private:
     int hoverIndex();
 
     int selectedItem();
+    std::pair<int, int> actionColumn() const;
 
     friend class ComboBox;
     void messureSize();
@@ -148,6 +153,7 @@ private:
     void mouseWheelMoved(wxMouseEvent &event);
 
     void sendDropDownEvent();
+    void sendDropDownActionEvent(int index);
 
 
     DECLARE_EVENT_TABLE()

src/slic3r/GUI/Widgets/WebView.cpp

@@ -418,6 +418,12 @@ bool WebView::DownloadAndInstallWebViewRuntime()
     return DownloadAndInstallWV2RT() == 0;
 }
 #endif
+wxString WebView::RedactUrl(const wxString& url)
+{
+    const size_t cut = url.find_first_of(wxString("?#"));
+    return cut == wxString::npos ? url : url.Left(cut);
+}
+
 void WebView::LoadUrl(wxWebView * webView, wxString const &url)
 {
     auto url2  = url;
@@ -425,7 +431,7 @@ void WebView::LoadUrl(wxWebView * webView, wxString const &url)
     url2.Replace("\\", "/");
 #endif
     if (!url2.empty()) { url2 = wxURI(url2).BuildURI(); }
-    BOOST_LOG_TRIVIAL(trace) << __FUNCTION__ << url2.ToUTF8();
+    BOOST_LOG_TRIVIAL(trace) << __FUNCTION__ << RedactUrl(url2).ToUTF8();
     webView->LoadURL(url2);
 }
 

src/slic3r/GUI/Widgets/WebView.hpp

@@ -21,6 +21,10 @@ public:
 #endif
     static void LoadUrl(wxWebView * webView, wxString const &url);
 
+    // Returns the URL truncated at the first '?' or '#', so a query/fragment carrying secrets
+    // (e.g. a session-handoff token) is never written to a log.
+    static wxString RedactUrl(const wxString& url);
+
     static bool RunScript(wxWebView * webView, wxString const & msg);
 
     // Marks "wx" as registered so CreateWebView's deferred add skips the duplicate.

src/slic3r/Utils/OrcaCloudServiceAgent.cpp

@@ -85,6 +85,8 @@ namespace {
 constexpr const char* ORCA_DEFAULT_API_URL   = "https://api.orcaslicer.com";
 constexpr const char* ORCA_DEFAULT_AUTH_URL  = "https://auth.orcaslicer.com";
 constexpr const char* ORCA_DEFAULT_CLOUD_URL = "https://cloud.orcaslicer.com";
+// Host component of ORCA_DEFAULT_CLOUD_URL. The handoff pins to it (build_webview_handoff_url).
+constexpr const char* ORCA_DEFAULT_CLOUD_HOST = "cloud.orcaslicer.com";
 // Orca: This is a public key with no secret, used to identify the client application to the backend.
 constexpr const char* ORCA_DEFAULT_PUB_KEY = "sb_publishable_lvVe_whOi80SU9BPSxM1kA_tbt9AbR_";
 
@@ -3018,6 +3020,82 @@ std::string OrcaCloudServiceAgent::get_cloud_login_url(const std::string& langua
     return url;
 }
 
+// True when the two strings are equal ignoring ASCII case.
+static bool ascii_iequals(const std::string& a, const std::string& b)
+{
+    return a.size() == b.size() &&
+           std::equal(a.begin(), a.end(), b.begin(),
+                      [](char x, char y) { return std::tolower(static_cast<unsigned char>(x)) ==
+                                                  std::tolower(static_cast<unsigned char>(y)); });
+}
+
+// Percent-encodes every byte outside the RFC 3986 unreserved set (A-Za-z0-9-._~), so token values
+// survive fragment parsing intact. Deliberately tiny: no URL-encoder dependency.
+static std::string percent_encode_unreserved(const std::string& s)
+{
+    static const char* const hex = "0123456789ABCDEF";
+    std::string out;
+    out.reserve(s.size());
+    for (unsigned char c : s) {
+        if ((c >= 'A' && c <= 'Z') || (c >= 'a' && c <= 'z') || (c >= '0' && c <= '9') ||
+            c == '-' || c == '.' || c == '_' || c == '~') {
+            out.push_back(static_cast<char>(c));
+        } else {
+            out.push_back('%');
+            out.push_back(hex[c >> 4]);
+            out.push_back(hex[c & 0x0F]);
+        }
+    }
+    return out;
+}
+
+std::string OrcaCloudServiceAgent::build_webview_handoff_url() const
+{
+    if (cloud_base_url.empty())
+        return "";
+
+    // Pin the handoff to the known cloud origin: https, no userinfo, no port (or :443), and the
+    // exact host. The OrcaCloud pane hardcodes the same host as kCloudUrl in WebViewDialog.cpp, so
+    // the handoff must target that host; if the pane ever becomes configurable, both must move
+    // together. Rejecting anything else avoids handing the refresh token to a plaintext or
+    // attacker-controlled base URL.
+    const std::string https_prefix = "https://";
+    const bool https_scheme = cloud_base_url.size() >= https_prefix.size() &&
+                              ascii_iequals(https_prefix, cloud_base_url.substr(0, https_prefix.size()));
+    const std::string authority = https_scheme ? cloud_base_url.substr(https_prefix.size()) : std::string();
+    // host_port = [userinfo@]host[:port], up to the first '/', '?' or '#'.
+    const std::string host_port  = authority.substr(0, authority.find_first_of("/?#"));
+    const bool        has_userinfo = host_port.find('@') != std::string::npos;
+    const size_t      port_sep     = host_port.find(':');
+    const std::string host         = host_port.substr(0, port_sep);
+    const std::string port         = port_sep == std::string::npos ? "" : host_port.substr(port_sep + 1);
+    const bool        host_ok      = ascii_iequals(host, ORCA_DEFAULT_CLOUD_HOST);
+    const bool        port_ok      = port.empty() || port == "443";
+    if (!https_scheme || has_userinfo || !host_ok || !port_ok) {
+        BOOST_LOG_TRIVIAL(warning) << "refusing OrcaCloud webview handoff: cloud URL is not the pinned https origin";
+        return "";
+    }
+
+    std::lock_guard<std::mutex> lock(session_mutex);
+    if (!session.logged_in || session.access_token.empty())
+        return "";
+
+    // Supabase's implicit flow (detectSessionInUrl) requires all four fragment parameters.
+    const auto expires_in = std::max<long long>(0,
+        std::chrono::duration_cast<std::chrono::seconds>(session.expires_at - std::chrono::system_clock::now()).count());
+
+    return cloud_base_url + "/#access_token=" + percent_encode_unreserved(session.access_token) +
+           "&refresh_token=" + percent_encode_unreserved(session.refresh_token) +
+           "&expires_in=" + std::to_string(expires_in) +
+           "&token_type=bearer";
+}
+
+bool OrcaCloudServiceAgent::access_token_needs_refresh(std::chrono::seconds skew) const
+{
+    std::lock_guard<std::mutex> lock(session_mutex);
+    return should_refresh_locked(skew);
+}
+
 int OrcaCloudServiceAgent::get_mw_user_preference(std::function<void(std::string)> callback)
 {
     BOOST_LOG_TRIVIAL(debug) << "OrcaCloudServiceAgent: get_mw_user_preference (stub)";

src/slic3r/Utils/OrcaCloudServiceAgent.hpp

@@ -203,6 +203,11 @@ public:
     // ========================================================================
     std::string get_cloud_service_host() override;
     std::string get_cloud_login_url(const std::string& language = "") override;
+    // URL that hands the current session to the OrcaCloud SPA via the URL fragment
+    // (Supabase implicit flow / detectSessionInUrl). Empty when not signed in or no cloud URL.
+    std::string build_webview_handoff_url() const;
+    // True when the access token is missing or will expire within `skew` (no network).
+    bool access_token_needs_refresh(std::chrono::seconds skew) const;
     int connect_server() override;
     bool is_server_connected() override;
     int refresh_connection() override;

tests/libslic3r/test_3mf.cpp

@@ -2043,3 +2043,40 @@ TEST_CASE("3MF XML entries declaring more than an int can hold fail to load", "[
         CHECK_FALSE(parser.check_3mf_from_prusa(path));
     }
 }
+
+TEST_CASE("Loading a gcode.3mf from a stream keeps the plate's pick and pattern file paths", "[3mf][Regression]")
+{
+    Model model;
+    REQUIRE(load_stl((std::string(TEST_DATA_DIR) + "/test_3mf/Prusa.stl").c_str(), &model));
+    model.add_default_instances();
+    ScopedTemporaryDir backup_dir("orca_pick");
+    model.set_backup_path(backup_dir.string());
+    DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+
+    auto plate = std::make_unique<PlateData>();
+    plate->plate_index       = 0;
+    plate->pick_file         = (backup_dir.path() / "pick.png").string();
+    plate->pattern_bbox_file = (backup_dir.path() / "plate.json").string();
+
+    ScopedTemporaryFile temp(".3mf");
+    const std::string   test_file = temp.string();
+    StoreParams store_params;
+    store_params.path   = test_file.c_str();
+    store_params.model  = &model;
+    store_params.config = &config;
+    store_params.plate_data_list.push_back(plate.get());
+    store_params.strategy = SaveStrategy::Zip64 | SaveStrategy::Silence;
+    REQUIRE(store_bbs_3mf(store_params));
+
+    boost::nowide::ifstream in(test_file, std::ios::binary);
+    Model              dst_model;
+    DynamicPrintConfig dst_config;
+    PlateDataPtrs      dst_plates;
+    Semver             file_version;
+    dst_model.set_backup_path(backup_dir.string());
+    REQUIRE(load_gcode_3mf_from_stream(in, &dst_config, &dst_model, &dst_plates, &file_version));
+    REQUIRE(dst_plates.size() == 1);
+    CHECK(dst_plates.front()->pick_file == "Metadata/pick_1.png");
+    CHECK(dst_plates.front()->pattern_bbox_file == "Metadata/plate_1.json");
+    release_PlateData_list(dst_plates);
+}