mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-09-21 16:02:37 +00:00
Compare commits
| Author | SHA1 | Date | |
|---|---|---|---|
 Ian Chua
|
ce41b5a3cb | ||
|
Ian Chua
|
8fd93907fd | ||
|
SoftFever
|
8056b32450 | ||
|
Ian Chua
|
fabd08af1e | ||
|
Ian Chua
|
33a8265a11 | ||
|
Ian Chua
|
d96682a798 | ||
|
Ian Chua
|
64d04a75f3 | ||
|
Ian Chua
|
bf22ef2a82 | ||
|
Ian Chua
|
dfd3444ae7 |
@@ -21,7 +21,6 @@ Paths below are relative to this skill. Commands run from the repository root.
|
||||
| Add a printer or nozzle; change models, variants, assets or extruder vectors | [machine-profiles.md](references/machine-profiles.md) |
|
||||
| Add a quality tier or tune a process | [process-profiles.md](references/process-profiles.md) |
|
||||
| Create a vendor bundle; diagnose loading or inheritance; migrate preset names | [vendor-bundle.md](references/vendor-bundle.md) |
|
||||
| Name a preset; check what a name must equal | [naming.md](references/naming.md) |
|
||||
| Change ids; diagnose AMS identity | [ids.md](references/ids.md), then `docs/HLSD/filament_id.md` for identity changes |
|
||||
| Review a profile diff | [review-checklist.md](references/review-checklist.md) |
|
||||
| Run checks, interpret failures, test another tree or verify in the app | [validation.md](references/validation.md) |
|
||||
@@ -45,10 +44,7 @@ Paths below are relative to this skill. Commands run from the repository root.
|
||||
update in-tree references too. See [migration rules](references/vendor-bundle.md#renamed_from).
|
||||
6. **Compatibility uses exact printer variant names.** Every instantiated non-library filament
|
||||
needs a non-empty `compatible_printers` in its own file. Library fallbacks may omit it;
|
||||
library printer-specific tunes use a non-empty list. One variant may be claimed by only one
|
||||
profile per filament product (`filament_id`); an overlap is resolved by moving the variant to the
|
||||
most specific preset, which is preferred over deleting a profile. See
|
||||
[one variant, one profile](references/filament-profiles.md#overlapping-coverage-one-variant-one-profile-per-product).
|
||||
library printer-specific tunes use a non-empty list. Keep same-product tunes disjoint.
|
||||
7. **Preset values are strings or arrays of strings.** Use `"instantiation": "false"`, not `false`.
|
||||
Model `nozzle_diameter` is a `;`-separated string; machine `nozzle_diameter` is an array.
|
||||
Wrong types can abort loading; see [failure scopes](references/vendor-bundle.md#failure-modes-ranked-by-blast-radius).
|
||||
@@ -91,8 +87,7 @@ Paths below are relative to this skill. Commands run from the repository root.
|
||||
```
|
||||
|
||||
On Windows use `py -3` instead of `python3`, and `scripts\check_profile.bat -Vendor "<Vendor>"`
|
||||
/ `scripts\check_profile.bat`. Logs land in a per-user cache dir (see
|
||||
[validation.md](references/validation.md)).
|
||||
/ `scripts\check_profile.bat`. Logs: `.test/check_profiles/logs/<check>.log`.
|
||||
Id checks remain tree-wide under `--vendor`; filament-only bundles skip the default slice check.
|
||||
See [validation.md](references/validation.md) for flags, coverage and error remedies.
|
||||
5. **Verify the changed behavior.** Slice newly added non-default processes explicitly, and
|
||||
|
||||
@@ -103,57 +103,6 @@ name.
|
||||
- Copying a base's full printer list onto a nozzle-specific variant produces duplicate combobox entries —
|
||||
a real shipped bug twice over.
|
||||
|
||||
## Overlapping coverage: one variant, one profile per product
|
||||
|
||||
`filament_id` is the **product** key, not the preset key — every variant of one product shares it
|
||||
(`<filament_vendor>/<filament_type>/<name-before-@>`). So if one printer variant appears in the
|
||||
`compatible_printers` of two presets of that product, the slicer cannot tell them apart at AMS match time.
|
||||
The C++ validator reports `Ambiguous AMS filament match: N presets share filament_id "X" … printer "Y"`.
|
||||
`orca_profile_tool.py check` does **not** see it and passes. Resolve the overlap by **specificity**: keep
|
||||
the variant on the most specific profile and remove it from every more general one. Deleting a profile is
|
||||
the least preferred fix — moving coverage keeps the tune that users rely on.
|
||||
|
||||
Judge specificity from the profile's `compatible_printers` — how many variants it actually covers — and
|
||||
use the name only as a secondary, easily-vague hint; decide by the lists, with a best judgement call on
|
||||
the name. Naming conventions differ by vendor: BBL's is the reference (`@<Vendor> <Model>` for a whole
|
||||
model, `@<Vendor> <Model> <nozzle> nozzle` for one variant, `@<Vendor>` for a vendor-wide generic), but
|
||||
others vary (`@<printer model>`, a printer serial, or Creality's `@<Model>-all`). A name never overrides
|
||||
the list — see [preset naming](naming.md) for the shapes.
|
||||
|
||||
Specificity, most to least:
|
||||
|
||||
1. **Variant-specialized** — lists a single printer variant (BBL-style
|
||||
`... @<Vendor> <Model> <nozzle> nozzle`).
|
||||
2. **Model-specialized** — lists the variants of one printer model (BBL-style `... @<Vendor> <Model>`).
|
||||
It should cover every variant of its model, not only the nozzle it was authored for.
|
||||
3. **Family / series** — lists variants spanning a printer family or series.
|
||||
4. **Generic / catch-all** — vendor-wide, covering many unrelated models (often the bare
|
||||
`Generic <mat> @<Vendor>`).
|
||||
|
||||
Rules:
|
||||
|
||||
- A model-specialized profile is extended to **all** variants of its model, and each variant it thereby
|
||||
starts covering is removed from the family and generic profiles that also listed it — including variants
|
||||
that had no overlap before. Apply it per nozzle, not just 0.4.
|
||||
- Apply it **per product**: trim only the material that has a specialized profile from the generic; a
|
||||
material whose product has no specialized profile keeps the variant in the generic.
|
||||
- Never strip coverage a variant has nowhere else to get. If a variant has no variant-level specialized
|
||||
profile, the next level down keeps it; when the model has specialized profiles, the model-level one wins
|
||||
over the family/generic.
|
||||
- Moving coverage is preferred over deleting. If a profile must be deleted, remove the more general
|
||||
one, not the specialized profile that carries the tune.
|
||||
- After moving coverage, repoint the affected `default_filament_profile` (machine) and clean the model's
|
||||
`default_materials`: they should name the most specific profile that covers the variant, and should not
|
||||
keep generic entries that no longer cover the model. This rule applies equally when adding or fixing
|
||||
defaults.
|
||||
|
||||
Multiple profiles of one product with **disjoint** `compatible_printers` is the intended end state.
|
||||
Adding coverage to the specialized profile and removing it from the generic is the preferred direction.
|
||||
|
||||
**Detection caveat:** `orca_profile_tool.py check` is blind to this; only the C++ validator behind the full
|
||||
`./scripts/check_profile.sh` reports it (`validate_system`). Always confirm with that, not the vendor-scoped
|
||||
loop.
|
||||
|
||||
## Alias shadowing
|
||||
|
||||
A printer-specific filament in either the library or a vendor bundle supersedes the library fallback
|
||||
|
||||
@@ -1,60 +0,0 @@
|
||||
# Preset naming
|
||||
|
||||
A preset's `name` is the loader's key, not decoration. The index registers it; `inherits`,
|
||||
`compatible_printers` and the `default_*` keys reference it by the exact string; `renamed_from` depends
|
||||
on it; and `setting_id` / `filament_id` hash it (see [ids.md](ids.md)). Two presets of one type in a
|
||||
bundle may not share a name (`check_preset_name_uniqueness`). Treat a name change as an identity change,
|
||||
not a relabel.
|
||||
|
||||
Naming is convention only where the loader does not parse it. What the loader actually acts on:
|
||||
|
||||
| Type | Shape | Acted on |
|
||||
| --- | --- | --- |
|
||||
| `machine_model` | `<Model>` | the exact string, named by a variant's `printer_model` |
|
||||
| `machine` | `<Model> <nozzle> nozzle` | the exact string, named by `compatible_printers`; `printer_variant` must equal a nozzle diameter |
|
||||
| `process` | `<lh>mm <Quality> @<target>` | the exact string when referenced or selected; the `@<target>` half is a label |
|
||||
| `filament` | `<Product> @<target>` | text before the first `@` is the **alias**, used for shadowing; the rest is a label |
|
||||
|
||||
## `machine_model`
|
||||
|
||||
`<Model>` — the vendor-prefixed model name (`Bambu Lab X1 Carbon`, `Creality K1`, `Prusa CORE One`). A
|
||||
variant names it verbatim in `printer_model`; a mismatch makes the variant invalid. `check_name_consistency`
|
||||
forces the index entry to equal the file's `name`, and the variant's `printer_model` targets this string
|
||||
([A `machine_model` is not a config preset](machine-profiles.md#a-machine_model-is-not-a-config-preset)).
|
||||
It is also the `<Model>_cover.png` and bed-asset stem.
|
||||
|
||||
## `machine` (variant)
|
||||
|
||||
`<Model> <nozzle> nozzle` is near-universal (`Bambu Lab X1 Carbon 0.4 nozzle`). `printer_variant` holds
|
||||
the bare nozzle (`0.4`) and must be an exact member of the model's `nozzle_diameter` list — the hard
|
||||
rules are in [The `machine` variant](machine-profiles.md#the-machine-variant). Casing varies
|
||||
(`nozzle` / `Nozzle`): match the bundle, not this page. A variant that is not nozzle-specific (a special
|
||||
toolhead, a multi-material build) may drop the suffix — still an exact reference. Bases are named
|
||||
`fdm_machine_common` / `fdm_<vendor>_common`.
|
||||
|
||||
## `process`
|
||||
|
||||
`<layer height>mm <quality> @<target>` — [process-profiles.md](process-profiles.md#naming) has the
|
||||
quality ladder and the `fdm_process_*` base names. The `@<target>` is a human label, not a reference: it
|
||||
usually does not equal a real variant, and compatibility comes from the resolved `compatible_printers`
|
||||
list or condition.
|
||||
|
||||
## `filament`
|
||||
|
||||
`<Product> @<target>`. The product half is what `filament_id` hashes and what survives as the **alias** up
|
||||
to the first `@`; the target half is a label except for reserved forms:
|
||||
|
||||
- `@base` — a non-instantiated product root. `@base` is convention; a base is really identified by
|
||||
`instantiation: "false"` and no `setting_id` ([the three-part shape](filament-profiles.md#the-three-part-shape)).
|
||||
- `@System` — the OrcaFilamentLibrary selectable shim. The literal `Generic <mat> @System` is
|
||||
load-bearing for 3MF/project recovery, beyond the alias rule ([alias shadowing](filament-profiles.md#alias-shadowing)).
|
||||
- `@<Vendor>`, `@<Vendor> <Model>`, `@<Vendor> <Model> <nozzle> nozzle` — printer tunes, BBL's shape.
|
||||
Other vendors differ (a bare model, a printer serial, Creality's `@<Model>-all`). Specificity is judged
|
||||
from `compatible_printers`, not the name
|
||||
([one variant, one profile](filament-profiles.md#overlapping-coverage-one-variant-one-profile-per-product)).
|
||||
|
||||
## Not the same as the filename
|
||||
|
||||
The loader keys off `name`, and a filename that disagrees usually still loads. Index `name` must equal the
|
||||
file's `name`, and the filename should match `sub_path`; a mismatch that differs only in case breaks
|
||||
another platform ([cross-platform paths](validation.md#cross-platform-paths)).
|
||||
@@ -79,15 +79,8 @@ and written in the preset's own file — golden rule 6, with the flattened-vs-ow
|
||||
inherited or copied the base's full printer list, and for two presets of one product with overlapping
|
||||
lists — duplicate combobox entries and an ambiguous AMS match.
|
||||
|
||||
Two presets of one product (`filament_id`) must not share a variant. Resolve it by specificity: move the
|
||||
variant to the most specific preset and remove it from the more general ones — preferred over deleting a
|
||||
profile. Then repoint the machine's `default_filament_profile` and the model's `default_materials` at the
|
||||
profile that now covers it. See
|
||||
[one variant, one profile](filament-profiles.md#overlapping-coverage-one-variant-one-profile-per-product).
|
||||
|
||||
*Why:* real shipped bugs twice (`b7b3418baf` "showing up everywhere", `ff83aa41ef` duplicate Flashforge
|
||||
entries). The Python `check` passes on an overlap; only the full `check_profile.sh` (`validate_system`)
|
||||
reports `Ambiguous AMS filament match`.
|
||||
entries).
|
||||
|
||||
## 6. Model ↔ variant ↔ process consistency
|
||||
|
||||
@@ -135,11 +128,7 @@ numbers nobody measured.
|
||||
## 11. `default_materials` (checked by CI)
|
||||
|
||||
`check` fails on a `default_materials` / `default_filament_profile` name that resolves to no system
|
||||
filament, so a dangling entry no longer reaches review. When compatibility moves between profiles of a
|
||||
product, the machine's `default_filament_profile` and the model's `default_materials` must be repointed at
|
||||
the most specific profile that still covers the variant, dropping generic entries that no longer apply —
|
||||
the same [specificity rule](filament-profiles.md#overlapping-coverage-one-variant-one-profile-per-product)
|
||||
applies when adding or fixing defaults. Scope the run while working on one vendor:
|
||||
filament, so a dangling entry no longer reaches review. Scope the run while working on one vendor:
|
||||
|
||||
```bash
|
||||
python3 scripts/orca_profile_tool.py check --vendor "<Vendor>" # py -3 on Windows
|
||||
|
||||
@@ -20,11 +20,8 @@ default Windows client refuses to run a checked-out `.ps1` at all. The `.ps1` fi
|
||||
probing `py -3`, then `python`, then `python3`; run the tool by hand with `py -3` for the same reason.
|
||||
|
||||
Every check in the run happens even after an earlier one fails; the script exits non-zero if any did, and writes
|
||||
`logs/<check>.log` plus, on failure, `pr_comment.md` under a per-user cache dir — the same report CI posts on the PR.
|
||||
That dir is `~/Library/Caches/orca-profile-check` on macOS, `${XDG_CACHE_HOME:-~/.cache}/orca-profile-check` on Linux
|
||||
and `%LOCALAPPDATA%\orca-profile-check` on Windows; it is named apart from OrcaSlicer's own per-user dirs and sits
|
||||
outside the checkout, so every worktree shares one copy. `--work-dir` / `-WorkDir` overrides it. A stale `.lock`
|
||||
there after a crash must be removed by hand.
|
||||
`.test/check_profiles/logs/<check>.log` plus, on failure, `.test/check_profiles/pr_comment.md` — the same
|
||||
report CI posts on the PR. A stale `.test/check_profiles/.lock` after a crash must be removed by hand.
|
||||
|
||||
## The five checks
|
||||
|
||||
@@ -153,10 +150,9 @@ Two things it therefore does **not** enforce:
|
||||
|
||||
Built from `src/dev-utils/OrcaSlicer_profile_validator.cpp` (`-DORCA_TOOLS=ON`).
|
||||
Both scripts find a local build under `build*/` — `check_profile.sh` tries Release, RelWithDebInfo, then
|
||||
Debug, and `check_profile.ps1` adds MinSizeRel — else they download the nightly into the
|
||||
`validator` subdirectory of the per-user cache dir (see above). Pass `--download` / `-Download` to
|
||||
match CI exactly, since a stale local build is used silently. Windows looks for
|
||||
`OrcaSlicer_profile_validator.exe`.
|
||||
Debug, and `check_profile.ps1` adds MinSizeRel — else they download the nightly into
|
||||
`.test/check_profiles/validator`. Pass `--download` / `-Download` to match CI exactly, since a stale
|
||||
local build is used silently. Windows looks for `OrcaSlicer_profile_validator.exe`.
|
||||
|
||||
If your build lives somewhere else entirely, point at it with `--validator` / `-Validator`, or set
|
||||
`ORCA_PROFILE_VALIDATOR` (`$env:ORCA_PROFILE_VALIDATOR` in PowerShell).
|
||||
@@ -227,7 +223,7 @@ Keep stems tidy too, but a space immediately before `.json` is not a trailing pa
|
||||
| `references unknown compatible_printers "<p>"` | the printer was renamed or deleted; fix the reference |
|
||||
| `references renamed compatible_printers "<old>" (now "<new>")` | in-tree references must name the current preset; `renamed_from` does not excuse them |
|
||||
| `Filament preset "<f>" is missing compatible_printers setting` | non-library filaments need a non-empty list in their **own** file — the flattened-vs-own-key trap is in [filament-profiles.md](filament-profiles.md#compatible_printers) |
|
||||
| `Ambiguous AMS filament match: N presets share filament_id "X" … printer "Y"` | make the lists disjoint by [specificity](filament-profiles.md#overlapping-coverage-one-variant-one-profile-per-product) — the specialized profile keeps the variant, the general ones drop it; prefer this over deleting a profile — or fix an `inherits` pointing at another material's `@base`. `orca_profile_tool.py check` does not catch this; only `validate_system` here does |
|
||||
| `Ambiguous AMS filament match: N presets share filament_id "X" … printer "Y"` | make the lists disjoint, or fix an `inherits` pointing at another material's `@base` |
|
||||
| `Layer height cannot exceed nozzle diameter.` / `Line width too small` | `Print::validate()` flow rules |
|
||||
| `[ERROR] … no <V>.json list references it, so it never loads` | `update-index`, or delete the file |
|
||||
| `[ERROR] … references it and it declares no profile type` | set the correct `type` explicitly, then `normalize` and `update-index` |
|
||||
|
||||
@@ -330,13 +330,12 @@ jobs:
|
||||
# sources are unchanged, so a re-run of the same commit would skip the
|
||||
# OrcaSlicer module and ship no test asset. A per-run value in that module's
|
||||
# env keeps it rebuilding; orca_deps stays cached, and the compiler cache
|
||||
# still serves the rebuild. run-tests on the same module builds the test
|
||||
# binaries.
|
||||
- name: Inject commit hash, run-tests and cache buster into Flatpak manifest
|
||||
# still serves the rebuild.
|
||||
- name: Inject commit hash and flatpak-builder cache buster into Flatpak manifest
|
||||
env:
|
||||
flatpak_builder_cache_buster: ${{ github.run_id }}-${{ github.run_attempt }}
|
||||
run: |
|
||||
sed -i "/name: OrcaSlicer/{n;s|buildsystem: simple|buildsystem: simple\n run-tests: true\n build-options:\n env:\n flatpak_builder_cache_buster: \"$flatpak_builder_cache_buster\"\n git_commit_hash: \"$git_commit_hash\"|}" \
|
||||
sed -i "/name: OrcaSlicer/{n;s|buildsystem: simple|buildsystem: simple\n build-options:\n env:\n flatpak_builder_cache_buster: \"$flatpak_builder_cache_buster\"\n git_commit_hash: \"$git_commit_hash\"|}" \
|
||||
scripts/flatpak/com.orcaslicer.OrcaSlicer.yml
|
||||
shell: bash
|
||||
# flatpak-builder's --ccache only wraps cc and gcc, and the manifest builds
|
||||
@@ -382,6 +381,9 @@ jobs:
|
||||
save-cache: false
|
||||
arch: ${{ matrix.variant.arch }}
|
||||
upload-artifact: false
|
||||
# run-tests fires the module's build-only test-commands; keep-build-dirs
|
||||
# retains the binaries for the packaging step below.
|
||||
run-tests: true
|
||||
keep-build-dirs: true
|
||||
# The build has just touched everything it can use, so an object untouched
|
||||
# for a week is dead, usually orphaned by a flag change.
|
||||
@@ -447,13 +449,10 @@ jobs:
|
||||
# the bounds checks are compiled in, so a stripped exe still catches them.
|
||||
find "$d/build_flatpak/tests" -type f -perm -u+x -exec strip --strip-unneeded {} + 2>/dev/null || true
|
||||
# At runtime the tests read tests/ (TEST_DATA_DIR), scripts/, and under
|
||||
# resources/ the shipped profiles (PROFILES_DIR), the printers/ maps, and
|
||||
# the icon SVGs (NativeCommands icon names are checked against them).
|
||||
# resources/ the shipped profiles (PROFILES_DIR) and the printers/ maps.
|
||||
find "$d" -mindepth 1 -maxdepth 1 -type d \
|
||||
! -name tests ! -name build_flatpak ! -name scripts ! -name resources -exec rm -rf {} +
|
||||
find "$d/resources" -mindepth 1 -maxdepth 1 ! -name profiles ! -name printers ! -name images -exec rm -rf {} +
|
||||
# Only the SVGs are read; the png/ico/icns/gif assets are ~35MB of dead weight.
|
||||
find "$d/resources/images" -mindepth 1 -maxdepth 1 ! -name '*.svg' -exec rm -rf {} + 2>/dev/null || true
|
||||
find "$d/resources" -mindepth 1 -maxdepth 1 ! -name profiles ! -name printers -exec rm -rf {} +
|
||||
tar -cf flatpak-test-asset.tar flatpak_app "$d"
|
||||
- name: Upload flatpak test asset
|
||||
uses: actions/upload-artifact@v7
|
||||
|
||||
@@ -448,26 +448,9 @@ jobs:
|
||||
|
||||
- name: Install nsis
|
||||
if: runner.os == 'Windows' && !vars.SELF_HOSTED
|
||||
shell: pwsh
|
||||
# The Chocolatey community feed intermittently 504s, and `choco install`
|
||||
# exits 0 when package resolution fails that way. Unchecked, the job then
|
||||
# builds for ~25 minutes before `cpack -G NSIS` reports a missing makensis.
|
||||
# Retry the install and verify makensis itself, so a real failure stops here.
|
||||
run: |
|
||||
dir "C:/Program Files (x86)/Windows Kits/10/Include"
|
||||
$nsisDir = Join-Path ${env:ProgramFiles(x86)} 'NSIS'
|
||||
$makensis = Join-Path $nsisDir 'makensis.exe'
|
||||
for ($attempt = 1; $attempt -le 3 -and -not (Test-Path $makensis); $attempt++) {
|
||||
if ($attempt -gt 1) { Start-Sleep -Seconds (15 * $attempt) }
|
||||
Write-Host "::group::choco install nsis (attempt $attempt)"
|
||||
choco install nsis --yes --no-progress
|
||||
Write-Host "::endgroup::"
|
||||
}
|
||||
if (-not (Test-Path $makensis)) {
|
||||
throw "NSIS install failed: $makensis not found after 3 attempts."
|
||||
}
|
||||
& $makensis /VERSION
|
||||
$nsisDir | Out-File -Append -FilePath $env:GITHUB_PATH -Encoding utf8
|
||||
choco install nsis
|
||||
|
||||
- name: Build slicer Win
|
||||
if: runner.os == 'Windows'
|
||||
|
||||
@@ -529,7 +529,7 @@ jobs:
|
||||
&& github.event_name == 'pull_request_target'
|
||||
permissions:
|
||||
contents: read
|
||||
pull-requests: write
|
||||
pull-requests: read
|
||||
issues: write
|
||||
runs-on: ubuntu-latest
|
||||
timeout-minutes: 5
|
||||
@@ -636,7 +636,7 @@ jobs:
|
||||
&& github.event_name == 'pull_request_target'
|
||||
permissions:
|
||||
contents: read # delegatable subtree, for file modes
|
||||
pull-requests: write
|
||||
pull-requests: read
|
||||
issues: write # label + comment
|
||||
runs-on: ubuntu-latest
|
||||
timeout-minutes: 10
|
||||
|
||||
@@ -52,4 +52,5 @@ internal_docs/
|
||||
__pycache__/
|
||||
*.pyc
|
||||
*.opc
|
||||
/.test/
|
||||
docs/superpowers/
|
||||
+30
-2702
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -125,7 +125,6 @@ src/slic3r/GUI/ThermalPreconditioningDialog.hpp
|
||||
src/slic3r/GUI/Jobs/SLAImportJob.cpp
|
||||
src/slic3r/GUI/Jobs/UpgradeNetworkJob.cpp
|
||||
src/slic3r/GUI/AboutDialog.cpp
|
||||
src/slic3r/GUI/ActionRegistry.cpp
|
||||
src/slic3r/GUI/AMSMaterialsSetting.cpp
|
||||
src/slic3r/GUI/ExtrusionCalibration.cpp
|
||||
src/slic3r/GUI/AmsMappingPopup.cpp
|
||||
@@ -160,7 +159,6 @@ src/slic3r/GUI/SelectMachinePop.cpp
|
||||
src/slic3r/GUI/StatusPanel.cpp
|
||||
src/slic3r/GUI/Monitor.cpp
|
||||
src/slic3r/GUI/MsgDialog.cpp
|
||||
src/slic3r/GUI/NativeCommands.cpp
|
||||
src/slic3r/GUI/NotificationManager.hpp
|
||||
src/slic3r/GUI/NotificationManager.cpp
|
||||
src/slic3r/GUI/ObjectDataViewModel.cpp
|
||||
@@ -181,8 +179,6 @@ src/slic3r/GUI/PublishDialog.cpp
|
||||
src/slic3r/GUI/PublishSettingsDialog.cpp
|
||||
src/slic3r/GUI/SavePresetDialog.cpp
|
||||
src/slic3r/GUI/Search.cpp
|
||||
src/slic3r/GUI/SettingsIndex.cpp
|
||||
src/slic3r/GUI/SpeedDialDialog.cpp
|
||||
src/slic3r/GUI/Selection.cpp
|
||||
src/slic3r/GUI/SelectMachine.cpp
|
||||
src/slic3r/GUI/PrePrintChecker.cpp
|
||||
@@ -250,7 +246,6 @@ src/slic3r/GUI/TroubleshootDialog.cpp
|
||||
src/slic3r/Utils/3DPrinterOS.cpp
|
||||
src/slic3r/Utils/AstroBox.cpp
|
||||
src/slic3r/Utils/Duet.cpp
|
||||
src/slic3r/Utils/UltiMaker.cpp
|
||||
src/slic3r/Utils/FlashAir.cpp
|
||||
src/slic3r/Utils/MKS.cpp
|
||||
src/slic3r/Utils/Moonraker.cpp
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -1,2 +0,0 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><path d="M14.5,1.5v12a1,1,0,0,1-1,1H1.5a1,1,0,0,1-1-1V1.5a1,1,0,0,1,1-1h12a1,1,0,0,1,1,1Z" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><polyline points="4,5 6.5,7.5 4,10" style="fill:none;stroke:#009688;stroke-linecap:round;stroke-linejoin:round"/><line x1="8" y1="10" x2="11" y2="10" style="fill:none;stroke:#009688;stroke-linecap:round;stroke-linejoin:round"/></svg>
|
||||
|
Before Width: | Height: | Size: 524 B |
@@ -1 +0,0 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 12 12"><path d="M11.5,5.5v5c0,.55-.45,1-1,1H1.5c-.55,0-1-.45-1-1V1.5C.5.95.95.5,1.5.5h5M3.5,6.5v2h2l5.59-5.59c.55-.55.55-1.45,0-2s-1.45-.55-2,0L3.5,6.5Z" style="fill:none; stroke:#949494; stroke-linecap:square; stroke-linejoin:round;"/></svg>
|
||||
|
Before Width: | Height: | Size: 340 B |
File diff suppressed because it is too large
Load Diff
Binary file not shown.
|
Before Width: | Height: | Size: 263 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 44 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 242 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 195 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 242 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 130 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 175 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 233 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 82 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 142 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 174 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 130 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 301 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 166 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 123 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 235 KiB |
@@ -1,155 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-ABS @Ender-2 Pro-all",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "xXPIfJOKtSIkbgSZ",
|
||||
"filament_id": "OFGwZmgS",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "80",
|
||||
"customized_plate_temp_initial_layer": "80",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.5,200],[7.0,240]]",
|
||||
"pressure_advance": "0.02",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-2 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,126 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-ABS @Ender-3 S1 Plus-all",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "41fKjFexWC3Zh7XZ",
|
||||
"filament_id": "OFGwZmgS",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"35"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.5,200],[7.0,240]]",
|
||||
"pressure_advance": "0.02",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 S1 Plus 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,126 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-ABS @Ender-3 S1 Pro-all",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "SDigCIbuTDRn8b96",
|
||||
"filament_id": "OFGwZmgS",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"35"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.5,200],[7.0,240]]",
|
||||
"pressure_advance": "0.02",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 S1 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,126 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-ABS @Ender-3 S1 Sonic-all",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "jYdpNiDMaOz2Ay6R",
|
||||
"filament_id": "OFGwZmgS",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"35"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.5,200],[7.0,240]]",
|
||||
"pressure_advance": "0.02",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 S1 Sonic 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,126 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-ABS @Ender-3 S1-all",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "5kp6VbwvXPo7Lvzg",
|
||||
"filament_id": "OFGwZmgS",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"35"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.5,200],[7.0,240]]",
|
||||
"pressure_advance": "0.02",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 S1 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,151 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-ABS @Ender-3 V3 KE-all",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "XUzmyFDwpqu4Kfjh",
|
||||
"filament_id": "OFGwZmgS",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"70"
|
||||
],
|
||||
"filament_cost": [
|
||||
"15"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.08"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "35",
|
||||
"cool_cds_fan_start_at_height": "0",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]",
|
||||
"pressure_advance": "0.05",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 V3 KE 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,146 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-ABS @Ender-3 V3 Plus-all",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "2bvhLTGnyzWCVkPy",
|
||||
"filament_id": "OFGwZmgS",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"70"
|
||||
],
|
||||
"filament_cost": [
|
||||
"15"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.08"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.926"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"100%"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "35",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"pressure_advance": "0.02",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 V3 Plus 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,172 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-ABS @Ender-3 V3-all",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "MQURrCD6wSxqa1jP",
|
||||
"filament_id": "OFGwZmgS",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_cost": [
|
||||
"15"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.08"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.97"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"14"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"70"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"epoxy_resin_plate_temp": "100",
|
||||
"epoxy_resin_plate_temp_initial_layer": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.0,230],[10.0,240],[20.0,250]]",
|
||||
"pressure_advance": "0.046",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 V3 0.4 nozzle",
|
||||
"Creality Ender-3 V3 0.6 nozzle",
|
||||
"Creality Ender-3 V3 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,138 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-ABS @Ender-3-all",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "H4UaUhKIsHDvC918",
|
||||
"filament_id": "OFGwZmgS",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"35"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"6"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.5,200],[7.0,240]]",
|
||||
"pressure_advance": "0.02",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,135 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-ABS @Ender-5 S1 Sonic-all",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "p6IjY3IqwpTbVeUP",
|
||||
"filament_id": "OFGwZmgS",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"35"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"70"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.5,200],[7.0,240]]",
|
||||
"pressure_advance": "0.04",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-5 S1 Sonic 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,135 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-ABS @Ender-5 S1-all",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "JJLc8iPdvZucHYiJ",
|
||||
"filament_id": "OFGwZmgS",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"35"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"70"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.5,200],[7.0,240]]",
|
||||
"pressure_advance": "0.04",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-5 S1 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,166 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-ABS @Sermoon D3 Pro-all",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "iYMDiv64la5GboAA",
|
||||
"filament_id": "OFGwZmgS",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
],
|
||||
"filament_cost": [
|
||||
"15"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.08"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"50"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"activate_chamber_temp_control": "1",
|
||||
"chamber_temperature": "60",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "80",
|
||||
"customized_plate_temp_initial_layer": "80",
|
||||
"default_filament_colour": "\"\"",
|
||||
"dont_slow_down_outer_wall": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_long_retractions_when_cut": "nil",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retraction_distances_when_cut": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_stamping_distance": "0",
|
||||
"filament_stamping_loading_speed": "0",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"idle_temperature": "0",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
|
||||
"pellet_flow_coefficient": "0.4157",
|
||||
"pressure_advance": "0.04",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Sermoon D3 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,160 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-ABS @Sermoon M300-all",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "afINvBBB1U1PjGVB",
|
||||
"filament_id": "OFGwZmgS",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_cost": [
|
||||
"15"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.08"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"90%"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"14"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "100",
|
||||
"customized_plate_temp_initial_layer": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"pressure_advance": "0.04",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Sermoon M300 0.4 nozzle",
|
||||
"Creality Sermoon M300 0.6 nozzle",
|
||||
"Creality Sermoon M300 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,188 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-Nylon @Ender-3 V3 Plus-all",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"from": "system",
|
||||
"setting_id": "JOqqaEHv9emSaO58",
|
||||
"filament_id": "OFvLppPU",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"50"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"50"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"50"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_cost": [
|
||||
"52"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.12"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"50"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"50"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"250"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"50"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"50"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "35",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"pressure_advance": "0.02",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 V3 Plus 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,167 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PETG @CR-10 SE-all",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"from": "system",
|
||||
"setting_id": "ca0t7XsRrFpxcL7a",
|
||||
"filament_id": "OF3WQaKK",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_cost": [
|
||||
"14"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"9"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"100%"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "35",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"pressure_advance": "0.02",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality CR-10 SE 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,133 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PETG @CR-10 Smart Pro-all",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"from": "system",
|
||||
"setting_id": "iB29j2vvnyfpO4tk",
|
||||
"filament_id": "OF3WQaKK",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_cost": [
|
||||
"14"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.3"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"customized_plate_temp": "70",
|
||||
"customized_plate_temp_initial_layer": "70",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"pressure_advance": "0.02",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality CR-10 Smart Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,133 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PETG @CR-10-all",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"from": "system",
|
||||
"setting_id": "LHxnOzAAJr1mk5GK",
|
||||
"filament_id": "OF3WQaKK",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_cost": [
|
||||
"14"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.3"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"customized_plate_temp": "70",
|
||||
"customized_plate_temp_initial_layer": "70",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"pressure_advance": "0.02",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality CR-10 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,170 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PETG @CR-M4 SE-all",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"from": "system",
|
||||
"setting_id": "N9vgkspyIr8EV1T8",
|
||||
"filament_id": "OF3WQaKK",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"50"
|
||||
],
|
||||
"filament_cost": [
|
||||
"22"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"50"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.9"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"70"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"\" \""
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"\" \""
|
||||
],
|
||||
"activate_chamber_temp_control": "1",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"epoxy_resin_plate_temp": "70",
|
||||
"epoxy_resin_plate_temp_initial_layer": "70",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.0,230],[5.0,240],[8.0,250]]",
|
||||
"pressure_advance": "0.08",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality CR-M4 SE 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,135 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PETG @Ender-2 Pro-all",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"from": "system",
|
||||
"setting_id": "F7h6B3GqsyWLIXWk",
|
||||
"filament_id": "OF3WQaKK",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.5,200],[7.0,240]]",
|
||||
"pressure_advance": "0.02",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-2 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,144 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PETG @Ender-3 S1 Plus-all",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"from": "system",
|
||||
"setting_id": "ukQaApwo1Kafy1of",
|
||||
"filament_id": "OF3WQaKK",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.5,200],[7.0,240]]",
|
||||
"pressure_advance": "0.02",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 S1 Plus 0.4 nozzle"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
]
|
||||
}
|
||||
@@ -1,144 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PETG @Ender-3 S1 Pro-all",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"from": "system",
|
||||
"setting_id": "YzCFzg5CFVXkP5mI",
|
||||
"filament_id": "OF3WQaKK",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.5,200],[7.0,240]]",
|
||||
"pressure_advance": "0.02",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 S1 Pro 0.4 nozzle"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
]
|
||||
}
|
||||
@@ -1,147 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PETG @Ender-3 S1 Sonic-all",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"from": "system",
|
||||
"setting_id": "nhmw2HhDlNRvvccd",
|
||||
"filament_id": "OF3WQaKK",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.5,200],[7.0,240]]",
|
||||
"pressure_advance": "0.02",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 S1 Sonic 0.4 nozzle"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
]
|
||||
}
|
||||
@@ -1,144 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PETG @Ender-3 S1-all",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"from": "system",
|
||||
"setting_id": "HOXafIaVQNYa5uzz",
|
||||
"filament_id": "OF3WQaKK",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.5,200],[7.0,240]]",
|
||||
"pressure_advance": "0.02",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 S1 0.4 nozzle"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
]
|
||||
}
|
||||
@@ -1,131 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PETG @Ender-3 V2-all",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"from": "system",
|
||||
"setting_id": "KOU7rizOewXtUGdS",
|
||||
"filament_id": "OF3WQaKK",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"14"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode\n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "70",
|
||||
"customized_plate_temp_initial_layer": "70",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.5,200],[7.0,240]]",
|
||||
"pressure_advance": "0.4",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 V2 0.4 nozzle"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
]
|
||||
}
|
||||
@@ -1,142 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PETG @Ender-3 V3 KE-all",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"from": "system",
|
||||
"setting_id": "RtNydGhtx6FMjQDr",
|
||||
"filament_id": "OF3WQaKK",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_cost": [
|
||||
"14"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.23"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"9"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "35",
|
||||
"cool_cds_fan_start_at_height": "0",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"epoxy_resin_plate_temp": "70",
|
||||
"epoxy_resin_plate_temp_initial_layer": "70",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]",
|
||||
"pressure_advance": "0.08",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 V3 KE 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,169 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PETG @Ender-3 V3 Plus-all",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"from": "system",
|
||||
"setting_id": "Z3uXiHTYNnlPwfXX",
|
||||
"filament_id": "OF3WQaKK",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_cost": [
|
||||
"14"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.23"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"9"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"100%"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "35",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "70",
|
||||
"epoxy_resin_plate_temp_initial_layer": "70",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"pressure_advance": "0.02",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 V3 Plus 0.4 nozzle",
|
||||
"Creality Ender-3 V3 Plus 0.6 nozzle",
|
||||
"Creality Ender-3 V3 Plus 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,156 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PETG @Ender-3 V3-all",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"from": "system",
|
||||
"setting_id": "jLTxg3JhZaoBjPDd",
|
||||
"filament_id": "OF3WQaKK",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_cost": [
|
||||
"14"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.23"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"25"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"235"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "35",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"epoxy_resin_plate_temp": "50",
|
||||
"epoxy_resin_plate_temp_initial_layer": "50",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]",
|
||||
"pressure_advance": "0.02",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 V3 0.4 nozzle",
|
||||
"Creality Ender-3 V3 0.6 nozzle",
|
||||
"Creality Ender-3 V3 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,138 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PETG @Ender-3-all",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"from": "system",
|
||||
"setting_id": "XtRCnvDgIt3woTfm",
|
||||
"filament_id": "OF3WQaKK",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"2"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"8"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.5,200],[7.0,240]]",
|
||||
"pressure_advance": "0.02",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,165 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PETG @Ender-5 S1 Sonic-all",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"from": "system",
|
||||
"setting_id": "kEN1rd7J0bDhpXLB",
|
||||
"filament_id": "OF3WQaKK",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"70"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.5,200],[7.0,240]]",
|
||||
"pressure_advance": "0.04",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-5 S1 Sonic 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,162 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PETG @Ender-5 S1-all",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"from": "system",
|
||||
"setting_id": "SXeN7LY4p9TpzIfK",
|
||||
"filament_id": "OF3WQaKK",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"70"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.5,200],[7.0,240]]",
|
||||
"pressure_advance": "0.04",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-5 S1 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,151 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PETG @Sermoon D3 Pro-all",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"from": "system",
|
||||
"setting_id": "PhFJ45TOClwggKYD",
|
||||
"filament_id": "OF3WQaKK",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_cost": [
|
||||
"14"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.23"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"7"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "80",
|
||||
"customized_plate_temp_initial_layer": "80",
|
||||
"default_filament_colour": "\"\"",
|
||||
"dont_slow_down_outer_wall": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_long_retractions_when_cut": "nil",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retraction_distances_when_cut": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_stamping_distance": "0",
|
||||
"filament_stamping_loading_speed": "0",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"idle_temperature": "0",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
|
||||
"pellet_flow_coefficient": "0.4157",
|
||||
"pressure_advance": "0.04",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Sermoon D3 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,132 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PETG @Sermoon D3-all",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"from": "system",
|
||||
"setting_id": "Pw1DtBsgpbzj8P0k",
|
||||
"filament_id": "OF3WQaKK",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "70",
|
||||
"customized_plate_temp_initial_layer": "70",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]",
|
||||
"pressure_advance": "0.05",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Sermoon D3 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,156 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PETG @Sermoon M300-all",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"from": "system",
|
||||
"setting_id": "WaYzXCaD9MuLDXsX",
|
||||
"filament_id": "OF3WQaKK",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"50"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"90%"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "70",
|
||||
"customized_plate_temp_initial_layer": "70",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,240],[1.0,240],[1.2,250]]",
|
||||
"pressure_advance": "0.07",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Sermoon M300 0.4 nozzle",
|
||||
"Creality Sermoon M300 0.6 nozzle",
|
||||
"Creality Sermoon M300 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,129 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PETG @Sermoon V1 Pro-all",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"from": "system",
|
||||
"setting_id": "yPw0Q8cZoH0z5Q5W",
|
||||
"filament_id": "OF3WQaKK",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "70",
|
||||
"customized_plate_temp_initial_layer": "70",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]",
|
||||
"pressure_advance": "0.05",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Sermoon V1 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,151 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PLA @CR-10-all",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "gRYsvflqQ8IIyNOu",
|
||||
"filament_id": "OFp4ETDP",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode "
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "60",
|
||||
"customized_plate_temp_initial_layer": "60",
|
||||
"default_filament_colour": "\"\"",
|
||||
"dont_slow_down_outer_wall": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_long_retractions_when_cut": "nil",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retraction_distances_when_cut": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_stamping_distance": "0",
|
||||
"filament_stamping_loading_speed": "0",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"idle_temperature": "0",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
|
||||
"pellet_flow_coefficient": "0.4157",
|
||||
"pressure_advance": "0.02",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality CR-10 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,146 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PLA @CR-M4 SE-all",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "tABggke8tUaNmEEh",
|
||||
"filament_id": "OFp4ETDP",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"50"
|
||||
],
|
||||
"filament_cost": [
|
||||
"22"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"50"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.9"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"70"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"0"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"0.05"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"50"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"\" \""
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"\" \""
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"epoxy_resin_plate_temp": "60",
|
||||
"epoxy_resin_plate_temp_initial_layer": "60",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.0,200],[5.0,210],[8.0,220]]",
|
||||
"pressure_advance": "0.04",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality CR-M4 SE 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,126 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PLA @Ender-2 Pro-all",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "pyic9IqsyOiafceu",
|
||||
"filament_id": "OFp4ETDP",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"210"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode\n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.5,200],[7.0,240]]",
|
||||
"pressure_advance": "0.04",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-2 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,123 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PLA @Ender-3 S1 Plus-all",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "DyGKfjo621EQ9y3H",
|
||||
"filament_id": "OFp4ETDP",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"190"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.5,200],[7.0,240]]",
|
||||
"pressure_advance": "0.04",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 S1 Plus 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,123 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PLA @Ender-3 S1 Pro-all",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "CgGlQJsaZQNxVOTe",
|
||||
"filament_id": "OFp4ETDP",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"190"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.5,200],[7.0,240]]",
|
||||
"pressure_advance": "0.04",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 S1 Pro 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,126 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PLA @Ender-3 S1 Sonic-all",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "WsUax8HKz582lvgP",
|
||||
"filament_id": "OFp4ETDP",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"190"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.5,200],[7.0,240]]",
|
||||
"pressure_advance": "0.04",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 S1 Sonic 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,123 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PLA @Ender-3 S1-all",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "q2a9vySJTktLFns3",
|
||||
"filament_id": "OFp4ETDP",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"190"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.5,200],[7.0,240]]",
|
||||
"pressure_advance": "0.04",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 S1 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,128 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PLA @Ender-3 V2-all",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "0w38xo4i4Hsv1NGO",
|
||||
"filament_id": "OFp4ETDP",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "60",
|
||||
"customized_plate_temp_initial_layer": "60",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.5,200],[7.0,240]]",
|
||||
"pressure_advance": "0.04",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 V2 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,151 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PLA @Ender-3 V3 KE-all",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "SpUnsDch11ry1O8N",
|
||||
"filament_id": "OFp4ETDP",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"50"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"50"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"50"
|
||||
],
|
||||
"filament_cost": [
|
||||
"18"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"50"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"50"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"50"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"50"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "35",
|
||||
"cool_cds_fan_start_at_height": "0",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"epoxy_resin_plate_temp": "50",
|
||||
"epoxy_resin_plate_temp_initial_layer": "50",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]",
|
||||
"pressure_advance": "0.048",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 V3 KE 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,153 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PLA @Ender-3 V3 Plus-all",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "EgSHGiAjpbFer6VA",
|
||||
"filament_id": "OFp4ETDP",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"filament_cost": [
|
||||
"18"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "35",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "50",
|
||||
"epoxy_resin_plate_temp_initial_layer": "50",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"pressure_advance": "0.02",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 V3 Plus 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,166 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PLA @Ender-3 V3 SE-all",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "HE08t6PGCuot7MAy",
|
||||
"filament_id": "OFp4ETDP",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"50"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.2"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"50"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"50"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"50"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"50"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode "
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[2.0,185],[4.0,190],[7.0,200]]",
|
||||
"pressure_advance": "0.02",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 V3 SE 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,163 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PLA @Ender-3 V3-all",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "NZMJjZm0Io0FYdX4",
|
||||
"filament_id": "OFp4ETDP",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"filament_cost": [
|
||||
"18"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"0%"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "35",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "50",
|
||||
"epoxy_resin_plate_temp_initial_layer": "50",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]",
|
||||
"pressure_advance": "0.02",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 V3 0.4 nozzle",
|
||||
"Creality Ender-3 V3 0.6 nozzle",
|
||||
"Creality Ender-3 V3 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,123 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "CR-PLA @Ender-3-all",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "ZzKcZo3q8UkZOVdx",
|
||||
"filament_id": "OFp4ETDP",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"activate_chamber_temp_control": "0",
|
||||
"chamber_temperature": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_lift_above": "0",
|
||||
"filament_retract_lift_below": "0",
|
||||
"filament_retract_lift_enforce": "All Surfaces",
|
||||
"filament_shrink": "100%",
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.5,200],[7.0,240]]",
|
||||
"pressure_advance": "0.04",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"compatible_printers": [
|
||||
"Creality Ender-3 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user