Keep the Process and Printer of an inherits_group of the Wrong Length

A project whose inherits_group did not have one entry per filament plus the process and printer entries was loaded as if it had none. The CLI then looked for system presets under the names of the user presets, found none and refused to slice a project that slices on main. The group is now read as before: the process first, the printer last and the filaments in between, up to the filament count. A filament without an entry counts as a system preset. A group with fewer than two entries is still ignored. The warning stays.
Move the Assemble List Parser into libslic3r
2026-09-29 20:01:26 +00:00 · 2026-09-29 13:33:34 +08:00 · 2026-09-29 02:51:05 +08:00 · 2026-09-28 05:58:48 +08:00
119 changed files with 1399 additions and 1992 deletions
@@ -1,7 +1,5 @@
 name: Daily OFL OTA Update

-run-name: Daily OFL OTA Update [OFL barrier]
-
 # This workflow is intended for creating and publishing the OrcaFilamentLibrary (OFL) OPC package to
 # https://github.com/OrcaSlicer/orcaslicer-profiles, which generates an OTA update.
 # This cronjob runs daily at 00:00 UTC every day and scans main plus every release/vX.Y.Z branch for
@@ -14,9 +12,9 @@ run-name: Daily OFL OTA Update [OFL barrier]
 # vendor-dispatch path is also what makes post_merge_profiles.yml call the OTA auto-publish API after
 # uploading - see post_merge_profiles.yml for both sides of that contract.
 #
-# Each run captures a timestamp, dispatches the needed OFL publishers, waits for
-# all of them to finish, then clears the pending-publish table once. Changes merged
-# after that timestamp remain pending for the next run.
+# At the start of each run, the pending-publish table is cleared up to a captured
+# timestamp (POST /api/v1/ota/ofl/pending/clear?timestamp=...). Changes merged after
+# that timestamp remain pending for the next run.

 on:
  schedule:
@@ -36,14 +34,32 @@ jobs:
    if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' }}
    runs-on: ubuntu-24.04
    steps:
-      - name: Capture start timestamp
+      - name: Capture start timestamp and clear OFL pending queue
        id: start
        shell: bash
+        env:
+          OTA_API_BASE_URL: ${{ vars.OTA_API_BASE_URL }}
+          OTA_API_KEY: ${{ secrets.OFL_OTA_PUBLISH_KEY }}
        run: |
          set -euo pipefail
+          [ -n "$OTA_API_BASE_URL" ] || { echo "::error::vars.OTA_API_BASE_URL is not set"; exit 1; }
+          [ -n "$OTA_API_KEY" ] || { echo "::error::secrets.OFL_OTA_PUBLISH_KEY is not set"; exit 1; }
+
          timestamp="$(date -u +%s)"
          echo "timestamp=$timestamp" >> "$GITHUB_OUTPUT"

+          resp_file="$RUNNER_TEMP/ota-pending-clear-response.json"
+          status="$(curl -sS -o "$resp_file" -w '%{http_code}' -X POST \
+            "${OTA_API_BASE_URL%/}/api/v1/ota/ofl/pending/clear?timestamp=$timestamp" \
+            -H "Authorization: Bearer $OTA_API_KEY")"
+          body="$(cat "$resp_file")"
+          echo "$body"
+
+          if [ "$status" != "200" ]; then
+            echo "::error::OTA pending-clear call failed with HTTP $status"
+            exit 1
+          fi
+
      - name: Checkout repository
        uses: actions/checkout@v7
        with:
@@ -68,21 +84,27 @@ jobs:
              | grep -E '^(main|release/v[0-9]+\.[0-9]+\.[0-9]+)$' | sort -u
          )

-          # The cron run is the checkpoint: a successful run means every
-          # dispatched branch publisher completed and the pending queue was
-          # cleared. Manual or push-triggered post_merge_profiles runs are not
-          # checkpoints for this scan.
-          successful_cron_runs="$(gh api --method GET \
-            "repos/${{ github.repository }}/actions/workflows/ofl-ota-cronjob.yml/runs" \
-            -f status=success -f branch=main -f per_page=100 --paginate \
-            --jq '.workflow_runs[] | select((.display_title // "") | contains("[OFL barrier]"))')"
-          since="$(jq -rs 'sort_by(.run_started_at) | last.run_started_at // empty' <<< "$successful_cron_runs")"
-
          for branch in "${branches[@]}"; do
            echo "::group::$branch"

+            # post_merge_profiles.yml's own run history, not this workflow's: this
+            # workflow only ever runs against main (schedule, or workflow_dispatch
+            # --ref main), so its head branch never varies - filtering ITS history
+            # by $branch would never match anything except main. post_merge_profiles.yml
+            # genuinely runs per-branch (this dispatch below sets --ref "$branch"),
+            # so its history is the real per-branch checkpoint. It also means a
+            # failed publish naturally gets retried tomorrow: the checkpoint only
+            # advances on a run that actually succeeded.
+            # --method GET is required, not cosmetic: gh api defaults to POST
+            # whenever -f fields are present unless a method is given
+            # explicitly, and POST on this list-runs endpoint 404s - confirmed
+            # on real Actions infrastructure, not just reasoned about.
+            since="$(gh api --method GET "repos/${{ github.repository }}/actions/workflows/post_merge_profiles.yml/runs" \
+              -f status=success -f branch="$branch" -f per_page=1 \
+              --jq '.workflow_runs[0].run_started_at // empty')"
+
            if [ -z "$since" ]; then
-              echo "No prior successful OFL cron run; checking $branch through $SCAN_UNTIL."
+              echo "No prior successful run for $branch; checking OFL changes up to $SCAN_UNTIL."
              changed_files="$(git log --until="$SCAN_UNTIL" --name-only --pretty=format: "origin/$branch" -- \
                resources/profiles/OrcaFilamentLibrary resources/profiles/OrcaFilamentLibrary.json \
                | sed '/^$/d')"
@@ -102,98 +124,16 @@ jobs:
            fi

            if [ "$changed" = true ]; then
-              dispatch_id="${GITHUB_RUN_ID}-${branch//\//-}"
-              # Record successful dispatches for the barrier step below.
-              # Branches whose workflow predates workflow_dispatch are skipped
-              # with a warning, as they were before the barrier was added.
-              if gh workflow run post_merge_profiles.yml \
+              # Tolerate a per-branch failure (e.g. a pre-existing release branch
+              # whose post_merge_profiles.yml predates the vendor/auto_publish
+              # inputs) rather than aborting the whole scan under set -e.
+              if ! gh workflow run post_merge_profiles.yml \
                --repo "${{ github.repository }}" \
                --ref "$branch" \
-                -f vendor="$VENDOR" -f auto_publish=true \
-                -f ofl_cron_dispatch_id="$dispatch_id"; then
-                printf '%s\t%s\n' "$branch" "$dispatch_id" >> "$RUNNER_TEMP/ofl-dispatches.tsv"
-              else
-                echo "::warning::skipping $branch because post_merge_profiles.yml could not be dispatched at that ref"
+                -f vendor="$VENDOR" -f auto_publish=true; then
+                echo "::warning::failed to dispatch post_merge_profiles.yml for $branch - its post_merge_profiles.yml at this ref may predate the vendor/auto_publish inputs"
              fi
            fi

            echo "::endgroup::"
          done
-
-      - name: Wait for OFL publishers
-        id: wait
-        shell: bash
-        env:
-          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-          DISPATCHES_FILE: ${{ runner.temp }}/ofl-dispatches.tsv
-        run: |
-          set -euo pipefail
-
-          if [ ! -s "$DISPATCHES_FILE" ]; then
-            echo "No OFL publisher workflows were dispatched; pending queue will not be cleared."
-            echo "publishers_dispatched=false" >> "$GITHUB_OUTPUT"
-            exit 0
-          fi
-
-          : > "$RUNNER_TEMP/ofl-run-ids.tsv"
-          while IFS=$'\t' read -r branch dispatch_id; do
-            [ -n "$branch" ] || continue
-            echo "Waiting for OFL publisher on $branch ($dispatch_id)"
-
-            run_id=""
-            for _ in {1..120}; do
-              runs_json="$(gh api --method GET \
-                "repos/${{ github.repository }}/actions/workflows/post_merge_profiles.yml/runs" \
-                -f branch="$branch" -f event=workflow_dispatch -f per_page=100)"
-              run_id="$(jq -r --arg marker "[OFL cron $dispatch_id]" \
-                '[.workflow_runs[] | select((.display_title // "") | contains($marker))] \
-                | sort_by(.created_at) | last | .id // empty' <<< "$runs_json")"
-              [ -n "$run_id" ] && break
-              sleep 5
-            done
-
-            if [ -z "$run_id" ]; then
-              echo "::error::could not find dispatched post_merge_profiles run for $branch ($dispatch_id)"
-              exit 1
-            fi
-            printf '%s\t%s\n' "$branch" "$run_id" >> "$RUNNER_TEMP/ofl-run-ids.tsv"
-          done < "$DISPATCHES_FILE"
-
-          all_success=true
-          while IFS=$'\t' read -r branch run_id; do
-            [ -n "$run_id" ] || continue
-            echo "Watching OFL publisher run $run_id for $branch"
-            if ! gh run watch "$run_id" --repo "${{ github.repository }}" --exit-status; then
-              all_success=false
-            fi
-          done < "$RUNNER_TEMP/ofl-run-ids.tsv"
-
-          if [ "$all_success" != true ]; then
-            echo "::error::one or more OFL publisher workflows failed; pending queue will not be cleared"
-            exit 1
-          fi
-          echo "publishers_dispatched=true" >> "$GITHUB_OUTPUT"
-
-      - name: Clear OFL pending queue
-        if: steps.wait.outputs.publishers_dispatched == 'true'
-        shell: bash
-        env:
-          OTA_API_BASE_URL: ${{ vars.OTA_API_BASE_URL }}
-          OTA_API_KEY: ${{ secrets.OFL_OTA_PUBLISH_KEY }}
-          TIMESTAMP: ${{ steps.start.outputs.timestamp }}
-        run: |
-          set -euo pipefail
-          [ -n "$OTA_API_BASE_URL" ] || { echo "::error::vars.OTA_API_BASE_URL is not set"; exit 1; }
-          [ -n "$OTA_API_KEY" ] || { echo "::error::secrets.OFL_OTA_PUBLISH_KEY is not set"; exit 1; }
-
-          resp_file="$RUNNER_TEMP/ota-pending-clear-response.json"
-          status="$(curl -sS -o "$resp_file" -w '%{http_code}' -X POST \
-            "${OTA_API_BASE_URL%/}/api/v1/ota/ofl/pending/clear?timestamp=$TIMESTAMP" \
-            -H "Authorization: Bearer $OTA_API_KEY")"
-          body="$(cat "$resp_file")"
-          echo "$body"
-
-          if [ "$status" != "200" ]; then
-            echo "::error::OTA pending-clear call failed with HTTP $status"
-            exit 1
-          fi
@@ -1,14 +1,5 @@
 name: Post-merge profiles

-run-name: >-
-  Post-merge profiles${{
-    inputs.ofl_cron_dispatch_id != '' &&
-    inputs.vendor == 'OrcaFilamentLibrary' &&
-    (inputs.auto_publish == true || inputs.auto_publish == 'true') &&
-    format(' [OFL cron {0}]', inputs.ofl_cron_dispatch_id) ||
-    ''
-  }}
-
 # Push-triggered counterpart to check_profiles.yml (which only gates PRs). When a
 # profile change lands on main or a release branch, rebuild the affected vendors'
 # binary preset caches (<vendor>.opc) and publish each as a versioned ZIP asset on
@@ -68,12 +59,6 @@ on:
        required: false
        type: boolean
        default: false
-      ofl_cron_dispatch_id:
-        description: >-
-          Unique marker supplied by the trusted OFL daily cron so it can find
-          and wait for this dispatched workflow run.
-        required: false
-        type: string

 permissions:
  contents: read
@@ -1,6 +1,6 @@
 {
 	"name": "Blocks",
-	"version": "02.04.00.13",
+	"version": "02.04.00.04",
 	"force_update": "0",
 	"description": "Blocks configurations",
 	"machine_model_list": [
@@ -43,8 +43,8 @@
 			"sub_path": "process/0.16mm Optimal 0.4 nozzle @Blocks_RF50.json"
 		},
 		{
-			"name": "0.20mm Standard 0.4 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.20mm Standard 0.4 nozzle @Blocks_Pro_S100.json"
+			"name": "0.20mm Standard 0.4 nozzle @Blocks",
+			"sub_path": "process/0.20mm Standard 0.4 nozzle @Blocks.json"
 		},
 		{
 			"name": "0.20mm Standard 0.4 nozzle @Blocks_RD50_V2",
@@ -55,8 +55,8 @@
 			"sub_path": "process/0.20mm Standard 0.4 nozzle @Blocks_RF50.json"
 		},
 		{
-			"name": "0.24mm Draft 0.4 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.24mm Draft 0.4 nozzle @Blocks_Pro_S100.json"
+			"name": "0.24mm Draft 0.4 nozzle @Blocks",
+			"sub_path": "process/0.24mm Draft 0.4 nozzle @Blocks.json"
 		},
 		{
 			"name": "0.24mm Draft 0.4 nozzle @Blocks_RD50_V2",
@@ -75,8 +75,8 @@
 			"sub_path": "process/0.28mm Extra Draft 0.4 nozzle @Blocks_RF50.json"
 		},
 		{
-			"name": "0.30mm Extra Draft 0.4 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.30mm Extra Draft 0.4 nozzle @Blocks_Pro_S100.json"
+			"name": "0.30mm Extra Draft 0.4 nozzle @Blocks",
+			"sub_path": "process/0.30mm Extra Draft 0.4 nozzle @Blocks.json"
 		},
 		{
 			"name": "fdm_process_common 0.6 nozzle",
@@ -111,8 +111,8 @@
 			"sub_path": "process/0.26mm Standard 0.6 nozzle @Blocks_RF50.json"
 		},
 		{
-			"name": "0.30mm Standard 0.6 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.30mm Standard 0.6 nozzle @Blocks_Pro_S100.json"
+			"name": "0.30mm Standard 0.6 nozzle @Blocks",
+			"sub_path": "process/0.30mm Standard 0.6 nozzle @Blocks.json"
 		},
 		{
 			"name": "0.32mm Draft 0.6 nozzle @Blocks_RD50_V2",
@@ -131,12 +131,12 @@
 			"sub_path": "process/0.38mm Extra Draft 0.6 nozzle @Blocks_RF50.json"
 		},
 		{
-			"name": "0.40mm Draft 0.6 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.40mm Draft 0.6 nozzle @Blocks_Pro_S100.json"
+			"name": "0.40mm Draft 0.6 nozzle @Blocks",
+			"sub_path": "process/0.40mm Draft 0.6 nozzle @Blocks.json"
 		},
 		{
-			"name": "0.30mm Optimal 0.8 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.30mm Optimal 0.8 nozzle @Blocks_Pro_S100.json"
+			"name": "0.30mm Optimal 0.8 nozzle @Blocks",
+			"sub_path": "process/0.30mm Optimal 0.8 nozzle @Blocks.json"
 		},
 		{
 			"name": "0.30mm Optimal 0.8 nozzle @Blocks_RD50_V2",
@@ -155,8 +155,8 @@
 			"sub_path": "process/0.38mm Standard 0.8 nozzle @Blocks_RF50.json"
 		},
 		{
-			"name": "0.40mm Standard 0.8 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.40mm Standard 0.8 nozzle @Blocks_Pro_S100.json"
+			"name": "0.40mm Standard 0.8 nozzle @Blocks",
+			"sub_path": "process/0.40mm Standard 0.8 nozzle @Blocks.json"
 		},
 		{
 			"name": "0.46mm Draft 0.8 nozzle @Blocks_RD50_V2",
@@ -167,8 +167,8 @@
 			"sub_path": "process/0.46mm Draft 0.8 nozzle @Blocks_RF50.json"
 		},
 		{
-			"name": "0.50mm Draft 0.8 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.50mm Draft 0.8 nozzle @Blocks_Pro_S100.json"
+			"name": "0.50mm Draft 0.8 nozzle @Blocks",
+			"sub_path": "process/0.50mm Draft 0.8 nozzle @Blocks.json"
 		},
 		{
 			"name": "0.54mm Extra Draft 0.8 nozzle @Blocks_RD50_V2",
@@ -179,36 +179,36 @@
 			"sub_path": "process/0.54mm Extra Draft 0.8 nozzle @Blocks_RF50.json"
 		},
 		{
-			"name": "0.30mm Optimal 1.0 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.30mm Optimal 1.0 nozzle @Blocks_Pro_S100.json"
+			"name": "0.30mm Optimal 1.0 nozzle @Blocks",
+			"sub_path": "process/0.30mm Optimal 1.0 nozzle @Blocks.json"
 		},
 		{
-			"name": "0.50mm Standard 1.0 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.50mm Standard 1.0 nozzle @Blocks_Pro_S100.json"
+			"name": "0.50mm Standard 1.0 nozzle @Blocks",
+			"sub_path": "process/0.50mm Standard 1.0 nozzle @Blocks.json"
 		},
 		{
-			"name": "0.60mm Draft 1.0 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.60mm Draft 1.0 nozzle @Blocks_Pro_S100.json"
+			"name": "0.60mm Draft 1.0 nozzle @Blocks",
+			"sub_path": "process/0.60mm Draft 1.0 nozzle @Blocks.json"
 		},
 		{
-			"name": "0.70mm Extra Draft 1.0 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.70mm Extra Draft 1.0 nozzle @Blocks_Pro_S100.json"
+			"name": "0.70mm Extra Draft 1.0 nozzle @Blocks",
+			"sub_path": "process/0.70mm Extra Draft 1.0 nozzle @Blocks.json"
 		},
 		{
-			"name": "0.50mm Optimal 1.2 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.50mm Optimal 1.2 nozzle @Blocks_Pro_S100.json"
+			"name": "0.50mm Optimal 1.2 nozzle @Blocks",
+			"sub_path": "process/0.50mm Optimal 1.2 nozzle @Blocks.json"
 		},
 		{
-			"name": "0.60mm Standard 1.2 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.60mm Standard 1.2 nozzle @Blocks_Pro_S100.json"
+			"name": "0.60mm Standard 1.2 nozzle @Blocks",
+			"sub_path": "process/0.60mm Standard 1.2 nozzle @Blocks.json"
 		},
 		{
-			"name": "0.70mm Draft 1.2 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.70mm Draft 1.2 nozzle @Blocks_Pro_S100.json"
+			"name": "0.70mm Draft 1.2 nozzle @Blocks",
+			"sub_path": "process/0.70mm Draft 1.2 nozzle @Blocks.json"
 		},
 		{
-			"name": "0.80mm Extra Draft 1.2 nozzle @Blocks_Pro_S100",
-			"sub_path": "process/0.80mm Extra Draft 1.2 nozzle @Blocks_Pro_S100.json"
+			"name": "0.80mm Extra Draft 1.2 nozzle @Blocks",
+			"sub_path": "process/0.80mm Extra Draft 1.2 nozzle @Blocks.json"
 		}
 	],
 	"filament_list": [
@@ -249,148 +249,48 @@
 			"sub_path": "filament/fdm_filament_tpu.json"
 		},
 		{
-			"name": "Blocks ABS @base",
-			"sub_path": "filament/Blocks ABS @base.json"
+			"name": "Generic ABS @Blocks",
+			"sub_path": "filament/Generic ABS @Blocks.json"
 		},
 		{
-			"name": "Blocks ASA @base",
-			"sub_path": "filament/Blocks ASA @base.json"
+			"name": "Generic ASA @Blocks",
+			"sub_path": "filament/Generic ASA @Blocks.json"
 		},
 		{
-			"name": "Blocks ASA-CF @base",
-			"sub_path": "filament/Blocks ASA-CF @base.json"
+			"name": "Generic ASA-CF @Blocks",
+			"sub_path": "filament/Generic ASA-CF @Blocks.json"
 		},
 		{
-			"name": "Blocks PA @base",
-			"sub_path": "filament/Blocks PA @base.json"
+			"name": "Generic PA @Blocks",
+			"sub_path": "filament/Generic PA @Blocks.json"
 		},
 		{
-			"name": "Blocks PA-CF @base",
-			"sub_path": "filament/Blocks PA-CF @base.json"
+			"name": "Generic PA-CF @Blocks",
+			"sub_path": "filament/Generic PA-CF @Blocks.json"
 		},
 		{
-			"name": "Blocks PC @base",
-			"sub_path": "filament/Blocks PC @base.json"
+			"name": "Generic PC @Blocks",
+			"sub_path": "filament/Generic PC @Blocks.json"
 		},
 		{
-			"name": "Blocks PETG @base",
-			"sub_path": "filament/Blocks PETG @base.json"
+			"name": "Generic PETG @Blocks",
+			"sub_path": "filament/Generic PETG @Blocks.json"
 		},
 		{
-			"name": "Blocks PLA @base",
-			"sub_path": "filament/Blocks PLA @base.json"
+			"name": "Generic PLA @Blocks",
+			"sub_path": "filament/Generic PLA @Blocks.json"
 		},
 		{
-			"name": "Blocks PLA-CF @base",
-			"sub_path": "filament/Blocks PLA-CF @base.json"
+			"name": "Generic PLA-CF @Blocks",
+			"sub_path": "filament/Generic PLA-CF @Blocks.json"
 		},
 		{
-			"name": "Blocks PVA @base",
-			"sub_path": "filament/Blocks PVA @base.json"
+			"name": "Generic PVA @Blocks",
+			"sub_path": "filament/Generic PVA @Blocks.json"
 		},
 		{
-			"name": "Blocks TPU @base",
-			"sub_path": "filament/Blocks TPU @base.json"
-		},
-		{
-			"name": "Blocks ABS @Blocks_RD50_V2",
-			"sub_path": "filament/Blocks ABS @Blocks_RD50_V2.json"
-		},
-		{
-			"name": "Blocks ABS @Blocks_RF50",
-			"sub_path": "filament/Blocks ABS @Blocks_RF50.json"
-		},
-		{
-			"name": "Blocks ASA @Blocks_RD50_V2",
-			"sub_path": "filament/Blocks ASA @Blocks_RD50_V2.json"
-		},
-		{
-			"name": "Blocks ASA @Blocks_RF50",
-			"sub_path": "filament/Blocks ASA @Blocks_RF50.json"
-		},
-		{
-			"name": "Blocks ASA-CF @Blocks_RD50_V2",
-			"sub_path": "filament/Blocks ASA-CF @Blocks_RD50_V2.json"
-		},
-		{
-			"name": "Blocks ASA-CF @Blocks_RF50",
-			"sub_path": "filament/Blocks ASA-CF @Blocks_RF50.json"
-		},
-		{
-			"name": "Blocks PA @Blocks_RD50_V2",
-			"sub_path": "filament/Blocks PA @Blocks_RD50_V2.json"
-		},
-		{
-			"name": "Blocks PA @Blocks_RF50",
-			"sub_path": "filament/Blocks PA @Blocks_RF50.json"
-		},
-		{
-			"name": "Blocks PA-CF @Blocks_RD50_V2",
-			"sub_path": "filament/Blocks PA-CF @Blocks_RD50_V2.json"
-		},
-		{
-			"name": "Blocks PA-CF @Blocks_RF50",
-			"sub_path": "filament/Blocks PA-CF @Blocks_RF50.json"
-		},
-		{
-			"name": "Blocks PC @Blocks_RD50_V2",
-			"sub_path": "filament/Blocks PC @Blocks_RD50_V2.json"
-		},
-		{
-			"name": "Blocks PC @Blocks_RF50",
-			"sub_path": "filament/Blocks PC @Blocks_RF50.json"
-		},
-		{
-			"name": "Blocks PETG @Blocks_Pro_S100",
-			"sub_path": "filament/Blocks PETG @Blocks_Pro_S100.json"
-		},
-		{
-			"name": "Blocks PETG @Blocks_RD50_V2",
-			"sub_path": "filament/Blocks PETG @Blocks_RD50_V2.json"
-		},
-		{
-			"name": "Blocks PETG @Blocks_RF50",
-			"sub_path": "filament/Blocks PETG @Blocks_RF50.json"
-		},
-		{
-			"name": "Blocks PLA @Blocks_Pro_S100",
-			"sub_path": "filament/Blocks PLA @Blocks_Pro_S100.json"
-		},
-		{
-			"name": "Blocks PLA @Blocks_RD50_V2",
-			"sub_path": "filament/Blocks PLA @Blocks_RD50_V2.json"
-		},
-		{
-			"name": "Blocks PLA @Blocks_RF50",
-			"sub_path": "filament/Blocks PLA @Blocks_RF50.json"
-		},
-		{
-			"name": "Blocks PLA-CF @Blocks_RD50_V2",
-			"sub_path": "filament/Blocks PLA-CF @Blocks_RD50_V2.json"
-		},
-		{
-			"name": "Blocks PLA-CF @Blocks_RF50",
-			"sub_path": "filament/Blocks PLA-CF @Blocks_RF50.json"
-		},
-		{
-			"name": "Blocks PVA @Blocks_RD50_V2",
-			"sub_path": "filament/Blocks PVA @Blocks_RD50_V2.json"
-		},
-		{
-			"name": "Blocks PVA @Blocks_RF50",
-			"sub_path": "filament/Blocks PVA @Blocks_RF50.json"
-		},
-		{
-			"name": "Blocks TPU @Blocks_Pro_S100",
-			"sub_path": "filament/Blocks TPU @Blocks_Pro_S100.json"
-		},
-		{
-			"name": "Blocks TPU @Blocks_RD50_V2",
-			"sub_path": "filament/Blocks TPU @Blocks_RD50_V2.json"
-		},
-		{
-			"name": "Blocks TPU @Blocks_RF50",
-			"sub_path": "filament/Blocks TPU @Blocks_RF50.json"
+			"name": "Generic TPU @Blocks",
+			"sub_path": "filament/Generic TPU @Blocks.json"
 		}
 	],
 	"machine_list": [
@@ -1,14 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks ABS @Blocks_RD50_V2",
-	"inherits": "Blocks ABS @base",
-	"from": "system",
-	"setting_id": "qhQ0qQDGJgsueCAF",
-	"instantiation": "true",
-	"compatible_printers": [
-		"BLOCKS RD50 V2 0.4 nozzle",
-		"BLOCKS RD50 V2 0.6 nozzle",
-		"BLOCKS RD50 V2 0.8 nozzle"
-	],
-	"renamed_from": "Blocks Generic ABS;Generic ABS @Blocks"
-}
@@ -1,13 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks ABS @Blocks_RF50",
-	"inherits": "Blocks ABS @base",
-	"from": "system",
-	"setting_id": "bGYMFFdKiROKuSiY",
-	"instantiation": "true",
-	"compatible_printers": [
-		"BLOCKS RF50 0.4 nozzle",
-		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
-	]
-}
@@ -1,14 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks ASA @Blocks_RD50_V2",
-	"inherits": "Blocks ASA @base",
-	"from": "system",
-	"setting_id": "HW7xDXThvpVFbMq5",
-	"instantiation": "true",
-	"compatible_printers": [
-		"BLOCKS RD50 V2 0.4 nozzle",
-		"BLOCKS RD50 V2 0.6 nozzle",
-		"BLOCKS RD50 V2 0.8 nozzle"
-	],
-	"renamed_from": "Blocks Generic ASA;Generic ASA @Blocks"
-}
@@ -1,13 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks ASA @Blocks_RF50",
-	"inherits": "Blocks ASA @base",
-	"from": "system",
-	"setting_id": "lBW7SCsvawi4icNU",
-	"instantiation": "true",
-	"compatible_printers": [
-		"BLOCKS RF50 0.4 nozzle",
-		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
-	]
-}
@@ -1,14 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks ASA-CF @Blocks_RD50_V2",
-	"inherits": "Blocks ASA-CF @base",
-	"from": "system",
-	"setting_id": "x5ksnGLGGy1PgDns",
-	"instantiation": "true",
-	"compatible_printers": [
-		"BLOCKS RD50 V2 0.4 nozzle",
-		"BLOCKS RD50 V2 0.6 nozzle",
-		"BLOCKS RD50 V2 0.8 nozzle"
-	],
-	"renamed_from": "Blocks Generic ASA-CF;Generic ASA-CF @Blocks"
-}
@@ -1,13 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks ASA-CF @Blocks_RF50",
-	"inherits": "Blocks ASA-CF @base",
-	"from": "system",
-	"setting_id": "pcbd5qFiMZAvDPg1",
-	"instantiation": "true",
-	"compatible_printers": [
-		"BLOCKS RF50 0.4 nozzle",
-		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
-	]
-}
@@ -1,14 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks PA @Blocks_RD50_V2",
-	"inherits": "Blocks PA @base",
-	"from": "system",
-	"setting_id": "gxD81n2jjrReLD29",
-	"instantiation": "true",
-	"compatible_printers": [
-		"BLOCKS RD50 V2 0.4 nozzle",
-		"BLOCKS RD50 V2 0.6 nozzle",
-		"BLOCKS RD50 V2 0.8 nozzle"
-	],
-	"renamed_from": "Blocks Generic PA;Generic PA @Blocks"
-}
@@ -1,13 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks PA @Blocks_RF50",
-	"inherits": "Blocks PA @base",
-	"from": "system",
-	"setting_id": "PzKxRMDnQUzVWRer",
-	"instantiation": "true",
-	"compatible_printers": [
-		"BLOCKS RF50 0.4 nozzle",
-		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
-	]
-}
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks PA @base",
-	"inherits": "fdm_filament_pa",
-	"from": "system",
-	"filament_id": "OFidOgK4",
-	"instantiation": "false",
-	"filament_vendor": [
-		"Blocks"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"10"
-	]
-}
@@ -1,14 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks PA-CF @Blocks_RD50_V2",
-	"inherits": "Blocks PA-CF @base",
-	"from": "system",
-	"setting_id": "EtbeKx3rbhUo1TtM",
-	"instantiation": "true",
-	"compatible_printers": [
-		"BLOCKS RD50 V2 0.4 nozzle",
-		"BLOCKS RD50 V2 0.6 nozzle",
-		"BLOCKS RD50 V2 0.8 nozzle"
-	],
-	"renamed_from": "Blocks Generic PA-CF;Generic PA-CF @Blocks"
-}
@@ -1,13 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks PA-CF @Blocks_RF50",
-	"inherits": "Blocks PA-CF @base",
-	"from": "system",
-	"setting_id": "udI8Q4X7HaPIaPt4",
-	"instantiation": "true",
-	"compatible_printers": [
-		"BLOCKS RF50 0.4 nozzle",
-		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
-	]
-}
@@ -1,14 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks PC @Blocks_RD50_V2",
-	"inherits": "Blocks PC @base",
-	"from": "system",
-	"setting_id": "HLc0shWnKwJzSFyW",
-	"instantiation": "true",
-	"compatible_printers": [
-		"BLOCKS RD50 V2 0.4 nozzle",
-		"BLOCKS RD50 V2 0.6 nozzle",
-		"BLOCKS RD50 V2 0.8 nozzle"
-	],
-	"renamed_from": "Blocks Generic PC;Generic PC @Blocks"
-}
@@ -1,13 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks PC @Blocks_RF50",
-	"inherits": "Blocks PC @base",
-	"from": "system",
-	"setting_id": "9a6bccZopMTeNHYu",
-	"instantiation": "true",
-	"compatible_printers": [
-		"BLOCKS RF50 0.4 nozzle",
-		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
-	]
-}
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks PC @base",
-	"inherits": "fdm_filament_pc",
-	"from": "system",
-	"filament_id": "OFlGY0MN",
-	"instantiation": "false",
-	"filament_vendor": [
-		"Blocks"
-	],
-	"filament_flow_ratio": [
-		"0.94"
-	],
-	"filament_max_volumetric_speed": [
-		"10"
-	]
-}
@@ -1,16 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks PETG @Blocks_Pro_S100",
-	"inherits": "Blocks PETG @base",
-	"from": "system",
-	"setting_id": "AhMR49fcFqtrQ6hI",
-	"instantiation": "true",
-	"compatible_printers": [
-		"BLOCKS Pro S100 0.4 nozzle",
-		"BLOCKS Pro S100 0.6 nozzle",
-		"BLOCKS Pro S100 0.8 nozzle",
-		"BLOCKS Pro S100 1.0 nozzle",
-		"BLOCKS Pro S100 1.2 nozzle"
-	],
-	"renamed_from": "Blocks Generic PETG;Generic PETG @Blocks"
-}
@@ -1,13 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks PETG @Blocks_RD50_V2",
-	"inherits": "Blocks PETG @base",
-	"from": "system",
-	"setting_id": "3v7ah1zVG8MERPSJ",
-	"instantiation": "true",
-	"compatible_printers": [
-		"BLOCKS RD50 V2 0.4 nozzle",
-		"BLOCKS RD50 V2 0.6 nozzle",
-		"BLOCKS RD50 V2 0.8 nozzle"
-	]
-}
@@ -1,13 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks PETG @Blocks_RF50",
-	"inherits": "Blocks PETG @base",
-	"from": "system",
-	"setting_id": "S7weR19wo9meJ6Yz",
-	"instantiation": "true",
-	"compatible_printers": [
-		"BLOCKS RF50 0.4 nozzle",
-		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
-	]
-}
@@ -1,16 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks PLA @Blocks_Pro_S100",
-	"inherits": "Blocks PLA @base",
-	"from": "system",
-	"setting_id": "vWojuLYIfduLGFLL",
-	"instantiation": "true",
-	"compatible_printers": [
-		"BLOCKS Pro S100 0.4 nozzle",
-		"BLOCKS Pro S100 0.6 nozzle",
-		"BLOCKS Pro S100 0.8 nozzle",
-		"BLOCKS Pro S100 1.0 nozzle",
-		"BLOCKS Pro S100 1.2 nozzle"
-	],
-	"renamed_from": "Blocks Generic PLA;Generic PLA @Blocks"
-}
@@ -1,13 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks PLA @Blocks_RD50_V2",
-	"inherits": "Blocks PLA @base",
-	"from": "system",
-	"setting_id": "y7y8NcXNdp17sJUs",
-	"instantiation": "true",
-	"compatible_printers": [
-		"BLOCKS RD50 V2 0.4 nozzle",
-		"BLOCKS RD50 V2 0.6 nozzle",
-		"BLOCKS RD50 V2 0.8 nozzle"
-	]
-}
@@ -1,13 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks PLA @Blocks_RF50",
-	"inherits": "Blocks PLA @base",
-	"from": "system",
-	"setting_id": "jt1MJF4eZzkkscEJ",
-	"instantiation": "true",
-	"compatible_printers": [
-		"BLOCKS RF50 0.4 nozzle",
-		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
-	]
-}
@@ -1,14 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks PLA-CF @Blocks_RD50_V2",
-	"inherits": "Blocks PLA-CF @base",
-	"from": "system",
-	"setting_id": "lhBtMKP1DmOB3HOI",
-	"instantiation": "true",
-	"compatible_printers": [
-		"BLOCKS RD50 V2 0.4 nozzle",
-		"BLOCKS RD50 V2 0.6 nozzle",
-		"BLOCKS RD50 V2 0.8 nozzle"
-	],
-	"renamed_from": "Blocks Generic PLA-CF;Generic PLA-CF @Blocks"
-}
@@ -1,13 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks PLA-CF @Blocks_RF50",
-	"inherits": "Blocks PLA-CF @base",
-	"from": "system",
-	"setting_id": "6CU83mAyhcZ4FCPI",
-	"instantiation": "true",
-	"compatible_printers": [
-		"BLOCKS RF50 0.4 nozzle",
-		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
-	]
-}
@@ -1,23 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks PLA-CF @base",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"filament_id": "OF6FfwOP",
-	"instantiation": "false",
-	"filament_vendor": [
-		"Blocks"
-	],
-	"filament_flow_ratio": [
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	],
-	"filament_type": [
-		"PLA-CF"
-	],
-	"slow_down_layer_time": [
-		"7"
-	]
-}
@@ -1,14 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks PVA @Blocks_RD50_V2",
-	"inherits": "Blocks PVA @base",
-	"from": "system",
-	"setting_id": "hREDqwKF6qyKkakp",
-	"instantiation": "true",
-	"compatible_printers": [
-		"BLOCKS RD50 V2 0.4 nozzle",
-		"BLOCKS RD50 V2 0.6 nozzle",
-		"BLOCKS RD50 V2 0.8 nozzle"
-	],
-	"renamed_from": "Blocks Generic PVA;Generic PVA @Blocks"
-}
@@ -1,13 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks PVA @Blocks_RF50",
-	"inherits": "Blocks PVA @base",
-	"from": "system",
-	"setting_id": "q6pKqHY7Iz4OZaAC",
-	"instantiation": "true",
-	"compatible_printers": [
-		"BLOCKS RF50 0.4 nozzle",
-		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
-	]
-}
@@ -1,17 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks PVA @base",
-	"inherits": "fdm_filament_pva",
-	"from": "system",
-	"filament_id": "OFqcNuE1",
-	"instantiation": "false",
-	"filament_vendor": [
-		"Blocks"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	]
-}
@@ -1,16 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks TPU @Blocks_Pro_S100",
-	"inherits": "Blocks TPU @base",
-	"from": "system",
-	"setting_id": "6Rkz2je91JRTRoTi",
-	"instantiation": "true",
-	"compatible_printers": [
-		"BLOCKS Pro S100 0.4 nozzle",
-		"BLOCKS Pro S100 0.6 nozzle",
-		"BLOCKS Pro S100 0.8 nozzle",
-		"BLOCKS Pro S100 1.0 nozzle",
-		"BLOCKS Pro S100 1.2 nozzle"
-	],
-	"renamed_from": "Blocks Generic TPU;Generic TPU @Blocks"
-}
@@ -1,13 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks TPU @Blocks_RD50_V2",
-	"inherits": "Blocks TPU @base",
-	"from": "system",
-	"setting_id": "mkCqRQTtXldzoEUg",
-	"instantiation": "true",
-	"compatible_printers": [
-		"BLOCKS RD50 V2 0.4 nozzle",
-		"BLOCKS RD50 V2 0.6 nozzle",
-		"BLOCKS RD50 V2 0.8 nozzle"
-	]
-}
@@ -1,13 +0,0 @@
-{
-	"type": "filament",
-	"name": "Blocks TPU @Blocks_RF50",
-	"inherits": "Blocks TPU @base",
-	"from": "system",
-	"setting_id": "bCCvu5Ow1JkwIrRR",
-	"instantiation": "true",
-	"compatible_printers": [
-		"BLOCKS RF50 0.4 nozzle",
-		"BLOCKS RF50 0.6 nozzle",
-		"BLOCKS RF50 0.8 nozzle"
-	]
-}
@@ -1,13 +1,12 @@
 {
 	"type": "filament",
-	"name": "Blocks ABS @base",
+	"name": "Generic ABS @Blocks",
 	"inherits": "fdm_filament_abs",
+	"renamed_from": "Blocks Generic ABS",
 	"from": "system",
-	"filament_id": "OFBBhiX8",
-	"instantiation": "false",
-	"filament_vendor": [
-		"Blocks"
-	],
+	"setting_id": "TL1Q1kA4t36GGObG",
+	"filament_id": "OFY9muEs",
+	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"
 	],
@@ -82,5 +81,13 @@
 	],
 	"during_print_exhaust_fan_speed": [
 		"100"
+	],
+	"compatible_printers": [
+		"BLOCKS RD50 V2 0.4 nozzle",
+		"BLOCKS RD50 V2 0.6 nozzle",
+		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RF50 0.4 nozzle",
+		"BLOCKS RF50 0.6 nozzle",
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }
@@ -1,13 +1,12 @@
 {
 	"type": "filament",
-	"name": "Blocks ASA @base",
+	"name": "Generic ASA @Blocks",
 	"inherits": "fdm_filament_asa",
+	"renamed_from": "Blocks Generic ASA",
 	"from": "system",
-	"filament_id": "OFTz2YXa",
-	"instantiation": "false",
-	"filament_vendor": [
-		"Blocks"
-	],
+	"setting_id": "xP7cB4RHgbm4cYDD",
+	"filament_id": "OFLPAxz3",
+	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"
 	],
@@ -82,5 +81,13 @@
 	],
 	"during_print_exhaust_fan_speed": [
 		"100"
+	],
+	"compatible_printers": [
+		"BLOCKS RD50 V2 0.4 nozzle",
+		"BLOCKS RD50 V2 0.6 nozzle",
+		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RF50 0.4 nozzle",
+		"BLOCKS RF50 0.6 nozzle",
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }
@@ -1,13 +1,12 @@
 {
 	"type": "filament",
-	"name": "Blocks ASA-CF @base",
+	"name": "Generic ASA-CF @Blocks",
 	"inherits": "fdm_filament_asa",
+	"renamed_from": "Blocks Generic ASA-CF",
 	"from": "system",
-	"filament_id": "OF8b9I7o",
-	"instantiation": "false",
-	"filament_vendor": [
-		"Blocks"
-	],
+	"setting_id": "ju4ue7yJoz3ujny6",
+	"filament_id": "OF53eLVD",
+	"instantiation": "true",
 	"filament_type": [
 		"ASA-CF"
 	],
@@ -85,5 +84,13 @@
 	],
 	"during_print_exhaust_fan_speed": [
 		"100"
+	],
+	"compatible_printers": [
+		"BLOCKS RD50 V2 0.4 nozzle",
+		"BLOCKS RD50 V2 0.6 nozzle",
+		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RF50 0.4 nozzle",
+		"BLOCKS RF50 0.6 nozzle",
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }
@@ -0,0 +1,24 @@
+{
+	"type": "filament",
+	"name": "Generic PA @Blocks",
+	"inherits": "fdm_filament_pa",
+	"renamed_from": "Blocks Generic PA",
+	"from": "system",
+	"setting_id": "hL3p8gAeciwDkjNK",
+	"filament_id": "OFg8ndtj",
+	"instantiation": "true",
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"compatible_printers": [
+		"BLOCKS RD50 V2 0.4 nozzle",
+		"BLOCKS RD50 V2 0.6 nozzle",
+		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RF50 0.4 nozzle",
+		"BLOCKS RF50 0.6 nozzle",
+		"BLOCKS RF50 0.8 nozzle"
+	]
+}
@@ -1,13 +1,12 @@
 {
 	"type": "filament",
-	"name": "Blocks PA-CF @base",
+	"name": "Generic PA-CF @Blocks",
 	"inherits": "fdm_filament_pa",
+	"renamed_from": "Blocks Generic PA-CF",
 	"from": "system",
-	"filament_id": "OFdWrXpL",
-	"instantiation": "false",
-	"filament_vendor": [
-		"Blocks"
-	],
+	"setting_id": "T6SO0WRdnG6wcyG8",
+	"filament_id": "OFQLcbps",
+	"instantiation": "true",
 	"filament_type": [
 		"PA-CF"
 	],
@@ -88,5 +87,13 @@
 	],
 	"during_print_exhaust_fan_speed": [
 		"80"
+	],
+	"compatible_printers": [
+		"BLOCKS RD50 V2 0.4 nozzle",
+		"BLOCKS RD50 V2 0.6 nozzle",
+		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RF50 0.4 nozzle",
+		"BLOCKS RF50 0.6 nozzle",
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }
@@ -0,0 +1,24 @@
+{
+	"type": "filament",
+	"name": "Generic PC @Blocks",
+	"inherits": "fdm_filament_pc",
+	"renamed_from": "Blocks Generic PC",
+	"from": "system",
+	"setting_id": "Xhs8PjtmwwVj0ksE",
+	"filament_id": "OFLakOUI",
+	"instantiation": "true",
+	"filament_flow_ratio": [
+		"0.94"
+	],
+	"filament_max_volumetric_speed": [
+		"10"
+	],
+	"compatible_printers": [
+		"BLOCKS RD50 V2 0.4 nozzle",
+		"BLOCKS RD50 V2 0.6 nozzle",
+		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RF50 0.4 nozzle",
+		"BLOCKS RF50 0.6 nozzle",
+		"BLOCKS RF50 0.8 nozzle"
+	]
+}
@@ -1,13 +1,12 @@
 {
 	"type": "filament",
-	"name": "Blocks PETG @base",
+	"name": "Generic PETG @Blocks",
 	"inherits": "fdm_filament_petg",
+	"renamed_from": "Blocks Generic PETG",
 	"from": "system",
-	"filament_id": "OF9t1Ga0",
-	"instantiation": "false",
-	"filament_vendor": [
-		"Blocks"
-	],
+	"setting_id": "NgzPlYItKHbmGgv3",
+	"filament_id": "OFYPdQJh",
+	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.94"
 	],
@@ -82,5 +81,18 @@
 	],
 	"slow_down_layer_time": [
 		"5"
+	],
+	"compatible_printers": [
+		"BLOCKS Pro S100 0.4 nozzle",
+		"BLOCKS Pro S100 0.6 nozzle",
+		"BLOCKS Pro S100 0.8 nozzle",
+		"BLOCKS Pro S100 1.0 nozzle",
+		"BLOCKS Pro S100 1.2 nozzle",
+		"BLOCKS RD50 V2 0.4 nozzle",
+		"BLOCKS RD50 V2 0.6 nozzle",
+		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RF50 0.4 nozzle",
+		"BLOCKS RF50 0.6 nozzle",
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }
@@ -1,13 +1,12 @@
 {
 	"type": "filament",
-	"name": "Blocks PLA @base",
+	"name": "Generic PLA @Blocks",
 	"inherits": "fdm_filament_pla",
+	"renamed_from": "Blocks Generic PLA",
 	"from": "system",
-	"filament_id": "OFVGAC8g",
-	"instantiation": "false",
-	"filament_vendor": [
-		"Blocks"
-	],
+	"setting_id": "kjhuttx4T8OtTNmV",
+	"filament_id": "OFDSrzZ8",
+	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"
 	],
@@ -40,5 +39,18 @@
 	],
 	"during_print_exhaust_fan_speed": [
 		"100"
+	],
+	"compatible_printers": [
+		"BLOCKS Pro S100 0.4 nozzle",
+		"BLOCKS Pro S100 0.6 nozzle",
+		"BLOCKS Pro S100 0.8 nozzle",
+		"BLOCKS Pro S100 1.0 nozzle",
+		"BLOCKS Pro S100 1.2 nozzle",
+		"BLOCKS RD50 V2 0.4 nozzle",
+		"BLOCKS RD50 V2 0.6 nozzle",
+		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RF50 0.4 nozzle",
+		"BLOCKS RF50 0.6 nozzle",
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }
@@ -0,0 +1,30 @@
+{
+	"type": "filament",
+	"name": "Generic PLA-CF @Blocks",
+	"inherits": "fdm_filament_pla",
+	"renamed_from": "Blocks Generic PLA-CF",
+	"from": "system",
+	"setting_id": "oKUqzwAWMrpiyGLf",
+	"filament_id": "OFWbdGsC",
+	"instantiation": "true",
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"20"
+	],
+	"filament_type": [
+		"PLA-CF"
+	],
+	"slow_down_layer_time": [
+		"7"
+	],
+	"compatible_printers": [
+		"BLOCKS RD50 V2 0.4 nozzle",
+		"BLOCKS RD50 V2 0.6 nozzle",
+		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RF50 0.4 nozzle",
+		"BLOCKS RF50 0.6 nozzle",
+		"BLOCKS RF50 0.8 nozzle"
+	]
+}
@@ -0,0 +1,24 @@
+{
+	"type": "filament",
+	"name": "Generic PVA @Blocks",
+	"inherits": "fdm_filament_pva",
+	"renamed_from": "Blocks Generic PVA",
+	"from": "system",
+	"setting_id": "tNw3oe7VovLkgUbB",
+	"filament_id": "OFDvXujf",
+	"instantiation": "true",
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"20"
+	],
+	"compatible_printers": [
+		"BLOCKS RD50 V2 0.4 nozzle",
+		"BLOCKS RD50 V2 0.6 nozzle",
+		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RF50 0.4 nozzle",
+		"BLOCKS RF50 0.6 nozzle",
+		"BLOCKS RF50 0.8 nozzle"
+	]
+}
@@ -1,13 +1,12 @@
 {
 	"type": "filament",
-	"name": "Blocks TPU @base",
+	"name": "Generic TPU @Blocks",
 	"inherits": "fdm_filament_tpu",
+	"renamed_from": "Blocks Generic TPU",
 	"from": "system",
-	"filament_id": "OFYnedOZ",
-	"instantiation": "false",
-	"filament_vendor": [
-		"Blocks"
-	],
+	"setting_id": "6iVYOCZo8ugs4JA0",
+	"filament_id": "OFgbpcy9",
+	"instantiation": "true",
 	"filament_max_volumetric_speed": [
 		"4"
 	],
@@ -55,5 +54,18 @@
 	],
 	"during_print_exhaust_fan_speed": [
 		"80"
+	],
+	"compatible_printers": [
+		"BLOCKS Pro S100 0.4 nozzle",
+		"BLOCKS Pro S100 0.6 nozzle",
+		"BLOCKS Pro S100 0.8 nozzle",
+		"BLOCKS Pro S100 1.0 nozzle",
+		"BLOCKS Pro S100 1.2 nozzle",
+		"BLOCKS RD50 V2 0.4 nozzle",
+		"BLOCKS RD50 V2 0.6 nozzle",
+		"BLOCKS RD50 V2 0.8 nozzle",
+		"BLOCKS RF50 0.4 nozzle",
+		"BLOCKS RF50 0.6 nozzle",
+		"BLOCKS RF50 0.8 nozzle"
 	]
 }
@@ -6,7 +6,7 @@
 	"setting_id": "G7HQgaspHXduDM8O",
 	"instantiation": "true",
 	"printer_model": "BLOCKS Pro S100",
-	"default_print_profile": "0.20mm Standard 0.4 nozzle @Blocks_Pro_S100",
+	"default_print_profile": "0.20mm Standard 0.4 nozzle @Blocks",
 	"max_layer_height": [
 		"0.30"
 	],
@@ -25,8 +25,5 @@
 	"printable_height": "900",
 	"upward_compatible_machine": [
 		"BLOCKS Pro S100"
-	],
-	"default_filament_profile": [
-		"Blocks PLA @Blocks_Pro_S100"
 	]
 }
@@ -6,7 +6,7 @@
 	"setting_id": "XkWdS210oUMQN17N",
 	"instantiation": "true",
 	"printer_model": "BLOCKS Pro S100",
-	"default_print_profile": "0.30mm Standard 0.6 nozzle @Blocks_Pro_S100",
+	"default_print_profile": "0.30mm Standard 0.6 nozzle @Blocks",
 	"max_layer_height": [
 		"0.50"
 	],
@@ -26,8 +26,5 @@
 	"upward_compatible_machine": [
 		"BLOCKS Pro S100"
 	],
-	"printer_variant": "0.6",
-	"default_filament_profile": [
-		"Blocks PLA @Blocks_Pro_S100"
-	]
+	"printer_variant": "0.6"
 }
@@ -6,7 +6,7 @@
 	"setting_id": "I6PdeCS7SbvIlkZf",
 	"instantiation": "true",
 	"printer_model": "BLOCKS Pro S100",
-	"default_print_profile": "0.40mm Standard 0.8 nozzle @Blocks_Pro_S100",
+	"default_print_profile": "0.40mm Standard 0.8 nozzle @Blocks",
 	"max_layer_height": [
 		"0.56"
 	],
@@ -26,8 +26,5 @@
 	"upward_compatible_machine": [
 		"BLOCKS Pro S100"
 	],
-	"printer_variant": "0.8",
-	"default_filament_profile": [
-		"Blocks PLA @Blocks_Pro_S100"
-	]
+	"printer_variant": "0.8"
 }
@@ -6,7 +6,7 @@
 	"setting_id": "elLdUyy9RhUoa37o",
 	"instantiation": "true",
 	"printer_model": "BLOCKS Pro S100",
-	"default_print_profile": "0.50mm Standard 1.0 nozzle @Blocks_Pro_S100",
+	"default_print_profile": "0.50mm Standard 1.0 nozzle @Blocks",
 	"max_layer_height": [
 		"0.7"
 	],
@@ -26,8 +26,5 @@
 	"upward_compatible_machine": [
 		"BLOCKS Pro S100"
 	],
-	"printer_variant": "1.0",
-	"default_filament_profile": [
-		"Blocks PLA @Blocks_Pro_S100"
-	]
+	"printer_variant": "1.0"
 }
@@ -6,7 +6,7 @@
 	"setting_id": "xtsGSJ4JkbHTPi44",
 	"instantiation": "true",
 	"printer_model": "BLOCKS Pro S100",
-	"default_print_profile": "0.60mm Standard 1.2 nozzle @Blocks_Pro_S100",
+	"default_print_profile": "0.60mm Standard 1.2 nozzle @Blocks",
 	"max_layer_height": [
 		"0.8"
 	],
@@ -26,8 +26,5 @@
 	"upward_compatible_machine": [
 		"BLOCKS Pro S100"
 	],
-	"printer_variant": "1.2",
-	"default_filament_profile": [
-		"Blocks PLA @Blocks_Pro_S100"
-	]
+	"printer_variant": "1.2"
 }
@@ -8,5 +8,5 @@
 	"bed_model": "PRO S100 HotBed model.stl",
 	"bed_texture": "PRO S100 HotBed texture.svg",
 	"hotend_model": "BLOCKS PrintCore.stl",
-	"default_materials": "Blocks PLA @Blocks_Pro_S100;Blocks PETG @Blocks_Pro_S100;Blocks TPU @Blocks_Pro_S100"
+	"default_materials": "Generic PLA @Blocks;Generic PETG @Blocks;Generic TPU @Blocks"
 }
@@ -34,9 +34,5 @@
 	"printable_height": "500",
 	"upward_compatible_machine": [
 		"BLOCKS RD50 V2"
-	],
-	"printer_variant": "0.4",
-	"default_filament_profile": [
-		"Blocks PLA @Blocks_RD50_V2"
 	]
 }
@@ -35,8 +35,5 @@
 	"deretraction_speed": [
 		"80"
 	],
-	"printer_variant": "0.6",
-	"default_filament_profile": [
-		"Blocks PLA @Blocks_RD50_V2"
-	]
+	"printer_variant": "0.6"
 }
@@ -35,8 +35,5 @@
 	"deretraction_speed": [
 		"80"
 	],
-	"printer_variant": "0.8",
-	"default_filament_profile": [
-		"Blocks PLA @Blocks_RD50_V2"
-	]
+	"printer_variant": "0.8"
 }
@@ -8,5 +8,5 @@
 	"bed_model": "RD50 V2 HotBed model.stl",
 	"bed_texture": "RD50 V2 HotBed texture.svg",
 	"hotend_model": "BLOCKS PrintCore.stl",
-	"default_materials": "Blocks PLA @Blocks_RD50_V2;Blocks PETG @Blocks_RD50_V2;Blocks TPU @Blocks_RD50_V2"
+	"default_materials": "Generic PLA @Blocks;Generic PETG @Blocks;Generic TPU @Blocks"
 }
@@ -51,7 +51,7 @@
 		"12"
 	],
 	"retraction_length": [
-		"1.2"
+		"1"
 	],
 	"retraction_speed": [
 		"60"
@@ -79,10 +79,5 @@
 	],
 	"retract_before_wipe": [
 		"0"
-	],
-	"default_filament_profile": [
-		"Blocks PLA @Blocks_RF50"
-	],
-	"support_multi_bed_types": "1",
-	"default_bed_type": "Textured PEI Plate"
+	]
 }
@@ -51,7 +51,7 @@
 		"12"
 	],
 	"retraction_length": [
-		"1.2"
+		"1"
 	],
 	"retraction_speed": [
 		"60"
@@ -75,8 +75,8 @@
 		"BLOCKS RF50"
 	],
 	"machine_start_gcode": [
-		"PRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer]\n",
-		"SET_PRESSURE_ADVANCE ADVANCE=0.046\n"
+		"PRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer]",
+		"SET_PRESSURE_ADVANCE ADVANCE=0.046"
 	],
 	"printer_variant": "0.6",
 	"wipe_distance": [
@@ -84,10 +84,5 @@
 	],
 	"retract_before_wipe": [
 		"0"
-	],
-	"default_filament_profile": [
-		"Blocks PLA @Blocks_RF50"
-	],
-	"support_multi_bed_types": "1",
-	"default_bed_type": "Textured PEI Plate"
+	]
 }
@@ -51,7 +51,7 @@
 		"12"
 	],
 	"retraction_length": [
-		"1.2"
+		"1"
 	],
 	"retraction_speed": [
 		"60"
@@ -80,10 +80,5 @@
 	],
 	"retract_before_wipe": [
 		"0"
-	],
-	"default_filament_profile": [
-		"Blocks PLA @Blocks_RF50"
-	],
-	"support_multi_bed_types": "1",
-	"default_bed_type": "Textured PEI Plate"
+	]
 }
@@ -8,6 +8,5 @@
 	"bed_model": "RF50 HotBed model.stl",
 	"bed_texture": "RF50 HotBed texture.svg",
 	"hotend_model": "BLOCKS PrintCore.stl",
-	"default_materials": "Blocks PLA @Blocks_RF50;Blocks PETG @Blocks_RF50;Blocks TPU @Blocks_RF50",
-	"not_support_bed_type": "Smooth Cool Plate;Engineering Plate;Textured Cool Plate;Cool Plate (SuperTack)"
+	"default_materials": "Generic PLA @Blocks;Generic PETG @Blocks;Generic TPU @Blocks"
 }
@@ -123,6 +123,9 @@
 	"wipe": [
 		"1"
 	],
+	"default_filament_profile": [
+		"Generic PLA @Blocks"
+	],
 	"bed_exclude_area": [
 		"0x0"
 	],
@@ -21,7 +21,7 @@
 	"top_solid_infill_flow_ratio": "0.97",
 	"bottom_solid_infill_flow_ratio": "1.08",
 	"seam_position": "aligned",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_patter": "grid",
 	"initial_layer_speed": "60",
 	"initial_layer_infill_speed": "80",
 	"initial_travel_speed": "100%",
@@ -57,7 +57,5 @@
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"elefant_foot_compensation": "0.25",
-	"elefant_foot_compensation_layers": "1",
-	"skirt_loops": "2",
-	"skirt_type": "perobject"
+	"elefant_foot_compensation_layers": "1"
 }
@@ -21,7 +21,7 @@
 	"top_solid_infill_flow_ratio": "0.97",
 	"bottom_solid_infill_flow_ratio": "1.08",
 	"seam_position": "aligned",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_patter": "grid",
 	"initial_layer_speed": "60",
 	"initial_layer_infill_speed": "80",
 	"initial_travel_speed": "100%",
@@ -57,7 +57,5 @@
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"elefant_foot_compensation": "0.25",
-	"elefant_foot_compensation_layers": "1",
-	"skirt_loops": "2",
-	"skirt_type": "perobject"
+	"elefant_foot_compensation_layers": "1"
 }
@@ -21,7 +21,7 @@
 	"top_solid_infill_flow_ratio": "0.97",
 	"bottom_solid_infill_flow_ratio": "1.08",
 	"seam_position": "aligned",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_patter": "grid",
 	"initial_layer_speed": "60",
 	"initial_layer_infill_speed": "80",
 	"initial_travel_speed": "100%",
@@ -57,7 +57,5 @@
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"elefant_foot_compensation": "0.25",
-	"elefant_foot_compensation_layers": "1",
-	"skirt_loops": "2",
-	"skirt_type": "perobject"
+	"elefant_foot_compensation_layers": "1"
 }
@@ -1,15 +1,14 @@
 {
 	"type": "process",
-	"name": "0.20mm Standard 0.4 nozzle @Blocks_Pro_S100",
+	"name": "0.20mm Standard 0.4 nozzle @Blocks",
 	"inherits": "fdm_process_blocks_common",
 	"from": "system",
-	"setting_id": "QSEguMMChNFZsK5H",
+	"setting_id": "47aDtVL6E5DVr7Mt",
 	"instantiation": "true",
 	"layer_height": "0.2",
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "5",
 	"compatible_printers": [
 		"BLOCKS Pro S100 0.4 nozzle"
-	],
-	"renamed_from": "0.20mm Standard 0.4 nozzle @Blocks"
+	]
 }
@@ -25,7 +25,7 @@
 	"top_solid_infill_flow_ratio": "0.97",
 	"bottom_solid_infill_flow_ratio": "1.08",
 	"seam_position": "aligned",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_patter": "grid",
 	"initial_layer_speed": "60",
 	"initial_layer_infill_speed": "80",
 	"initial_travel_speed": "100%",
@@ -61,7 +61,5 @@
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"elefant_foot_compensation": "0.25",
-	"elefant_foot_compensation_layers": "1",
-	"skirt_loops": "2",
-	"skirt_type": "perobject"
+	"elefant_foot_compensation_layers": "1"
 }
@@ -1,15 +1,14 @@
 {
 	"type": "process",
-	"name": "0.24mm Draft 0.4 nozzle @Blocks_Pro_S100",
+	"name": "0.24mm Draft 0.4 nozzle @Blocks",
 	"inherits": "fdm_process_blocks_common",
 	"from": "system",
-	"setting_id": "uALfEFHGmup6vBYI",
+	"setting_id": "ETADjxV6ViJQdnHA",
 	"instantiation": "true",
 	"layer_height": "0.24",
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "5",
 	"compatible_printers": [
 		"BLOCKS Pro S100 0.4 nozzle"
-	],
-	"renamed_from": "0.24mm Draft 0.4 nozzle @Blocks"
+	]
 }
@@ -21,7 +21,7 @@
 	"top_solid_infill_flow_ratio": "0.97",
 	"bottom_solid_infill_flow_ratio": "1.08",
 	"seam_position": "aligned",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_patter": "grid",
 	"initial_layer_speed": "60",
 	"initial_layer_infill_speed": "80",
 	"initial_travel_speed": "100%",
@@ -57,7 +57,5 @@
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"elefant_foot_compensation": "0.25",
-	"elefant_foot_compensation_layers": "1",
-	"skirt_loops": "2",
-	"skirt_type": "perobject"
+	"elefant_foot_compensation_layers": "1"
 }
@@ -21,7 +21,7 @@
 	"top_solid_infill_flow_ratio": "0.97",
 	"bottom_solid_infill_flow_ratio": "1.08",
 	"seam_position": "aligned",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_patter": "grid",
 	"initial_layer_speed": "60",
 	"initial_layer_infill_speed": "80",
 	"initial_travel_speed": "100%",
@@ -57,7 +57,5 @@
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"elefant_foot_compensation": "0.25",
-	"elefant_foot_compensation_layers": "1",
-	"skirt_loops": "2",
-	"skirt_type": "perobject"
+	"elefant_foot_compensation_layers": "1"
 }
@@ -22,7 +22,7 @@
 	"top_solid_infill_flow_ratio": "0.97",
 	"bottom_solid_infill_flow_ratio": "1.08",
 	"seam_position": "aligned",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_patter": "grid",
 	"initial_layer_speed": "60",
 	"initial_layer_infill_speed": "80",
 	"initial_travel_speed": "100%",
@@ -57,7 +57,5 @@
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"elefant_foot_compensation": "0.25",
-	"elefant_foot_compensation_layers": "1",
-	"skirt_loops": "2",
-	"skirt_type": "perobject"
+	"elefant_foot_compensation_layers": "1"
 }
@@ -1,15 +1,14 @@
 {
 	"type": "process",
-	"name": "0.30mm Extra Draft 0.4 nozzle @Blocks_Pro_S100",
+	"name": "0.30mm Extra Draft 0.4 nozzle @Blocks",
 	"inherits": "fdm_process_blocks_common",
 	"from": "system",
-	"setting_id": "HYKF5l2OGvpugSQy",
+	"setting_id": "UbuICsmppKDsaaZ4",
 	"instantiation": "true",
 	"bottom_shell_layers": "3",
 	"top_shell_layers": "4",
 	"layer_height": "0.30",
 	"compatible_printers": [
 		"BLOCKS Pro S100 0.4 nozzle"
-	],
-	"renamed_from": "0.30mm Extra Draft 0.4 nozzle @Blocks"
+	]
 }
@@ -1,15 +1,14 @@
 {
 	"type": "process",
-	"name": "0.30mm Optimal 0.8 nozzle @Blocks_Pro_S100",
+	"name": "0.30mm Optimal 0.8 nozzle @Blocks",
 	"inherits": "fdm_process_common 0.8 nozzle",
 	"from": "system",
-	"setting_id": "OUfZvizM5MGnvHfp",
+	"setting_id": "YqkYzp5zdH4R5upm",
 	"instantiation": "true",
 	"bottom_shell_layers": "3",
 	"top_shell_layers": "3",
 	"layer_height": "0.3",
 	"compatible_printers": [
 		"BLOCKS Pro S100 0.8 nozzle"
-	],
-	"renamed_from": "0.30mm Optimal 0.8 nozzle @Blocks"
+	]
 }
@@ -21,7 +21,7 @@
 	"top_solid_infill_flow_ratio": "0.97",
 	"bottom_solid_infill_flow_ratio": "1.08",
 	"seam_position": "aligned",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_patter": "grid",
 	"initial_layer_speed": "60",
 	"initial_layer_infill_speed": "80",
 	"initial_travel_speed": "100%",
@@ -57,7 +57,5 @@
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"elefant_foot_compensation": "0.25",
-	"elefant_foot_compensation_layers": "1",
-	"skirt_loops": "2",
-	"skirt_type": "perobject"
+	"elefant_foot_compensation_layers": "1"
 }
@@ -1,15 +1,14 @@
 {
 	"type": "process",
-	"name": "0.30mm Optimal 1.0 nozzle @Blocks_Pro_S100",
+	"name": "0.30mm Optimal 1.0 nozzle @Blocks",
 	"inherits": "fdm_process_common 1.0 nozzle",
 	"from": "system",
-	"setting_id": "HGG9WxKVr89qNFDx",
+	"setting_id": "8pBawPScHkyQu0SW",
 	"instantiation": "true",
 	"bottom_shell_layers": "4",
 	"top_shell_layers": "4",
 	"layer_height": "0.30",
 	"compatible_printers": [
 		"BLOCKS Pro S100 1.0 nozzle"
-	],
-	"renamed_from": "0.30mm Optimal 1.0 nozzle @Blocks"
+	]
 }
@@ -1,15 +1,14 @@
 {
 	"type": "process",
-	"name": "0.30mm Standard 0.6 nozzle @Blocks_Pro_S100",
+	"name": "0.30mm Standard 0.6 nozzle @Blocks",
 	"inherits": "fdm_process_common 0.6 nozzle",
 	"from": "system",
-	"setting_id": "gO2I1YjBl4nf8yzr",
+	"setting_id": "EPI3PAVK9LpJOZWO",
 	"instantiation": "true",
 	"bottom_shell_layers": "3",
 	"top_shell_layers": "3",
 	"layer_height": "0.30",
 	"compatible_printers": [
 		"BLOCKS Pro S100 0.6 nozzle"
-	],
-	"renamed_from": "0.30mm Standard 0.6 nozzle @Blocks"
+	]
 }
@@ -22,7 +22,7 @@
 	"top_solid_infill_flow_ratio": "0.97",
 	"bottom_solid_infill_flow_ratio": "1.08",
 	"seam_position": "aligned",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_patter": "grid",
 	"initial_layer_speed": "60",
 	"initial_layer_infill_speed": "80",
 	"initial_travel_speed": "100%",
@@ -57,7 +57,5 @@
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"elefant_foot_compensation": "0.25",
-	"elefant_foot_compensation_layers": "1",
-	"skirt_loops": "2",
-	"skirt_type": "perobject"
+	"elefant_foot_compensation_layers": "1"
 }
@@ -21,7 +21,7 @@
 	"top_solid_infill_flow_ratio": "0.97",
 	"bottom_solid_infill_flow_ratio": "1.08",
 	"seam_position": "aligned",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_patter": "grid",
 	"initial_layer_speed": "60",
 	"initial_layer_infill_speed": "80",
 	"initial_travel_speed": "100%",
@@ -57,7 +57,5 @@
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"elefant_foot_compensation": "0.25",
-	"elefant_foot_compensation_layers": "1",
-	"skirt_loops": "2",
-	"skirt_type": "perobject"
+	"elefant_foot_compensation_layers": "1"
 }
@@ -22,7 +22,7 @@
 	"top_solid_infill_flow_ratio": "0.97",
 	"bottom_solid_infill_flow_ratio": "1.08",
 	"seam_position": "aligned",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_patter": "grid",
 	"initial_layer_speed": "60",
 	"initial_layer_infill_speed": "80",
 	"initial_travel_speed": "100%",
@@ -57,7 +57,5 @@
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"elefant_foot_compensation": "0.25",
-	"elefant_foot_compensation_layers": "1",
-	"skirt_loops": "2",
-	"skirt_type": "perobject"
+	"elefant_foot_compensation_layers": "1"
 }
@@ -1,15 +1,14 @@
 {
 	"type": "process",
-	"name": "0.40mm Draft 0.6 nozzle @Blocks_Pro_S100",
+	"name": "0.40mm Draft 0.6 nozzle @Blocks",
 	"inherits": "fdm_process_common 0.6 nozzle",
 	"from": "system",
-	"setting_id": "OjsLUl1heqv1cevs",
+	"setting_id": "CShVKoGspbMJNPw8",
 	"instantiation": "true",
 	"bottom_shell_layers": "2",
 	"top_shell_layers": "2",
 	"layer_height": "0.40",
 	"compatible_printers": [
 		"BLOCKS Pro S100 0.6 nozzle"
-	],
-	"renamed_from": "0.40mm Draft 0.6 nozzle @Blocks"
+	]
 }
@@ -1,15 +1,14 @@
 {
 	"type": "process",
-	"name": "0.40mm Standard 0.8 nozzle @Blocks_Pro_S100",
+	"name": "0.40mm Standard 0.8 nozzle @Blocks",
 	"inherits": "fdm_process_common 0.8 nozzle",
 	"from": "system",
-	"setting_id": "laOTioBGySeudJpl",
+	"setting_id": "TSRjmfWaatY7oLJB",
 	"instantiation": "true",
 	"bottom_shell_layers": "3",
 	"top_shell_layers": "4",
 	"layer_height": "0.40",
 	"compatible_printers": [
 		"BLOCKS Pro S100 0.8 nozzle"
-	],
-	"renamed_from": "0.40mm Standard 0.8 nozzle @Blocks"
+	]
 }
@@ -22,7 +22,7 @@
 	"top_solid_infill_flow_ratio": "0.97",
 	"bottom_solid_infill_flow_ratio": "1.08",
 	"seam_position": "aligned",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_patter": "grid",
 	"initial_layer_speed": "60",
 	"initial_layer_infill_speed": "80",
 	"initial_travel_speed": "100%",
@@ -57,7 +57,5 @@
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"elefant_foot_compensation": "0.25",
-	"elefant_foot_compensation_layers": "1",
-	"skirt_loops": "2",
-	"skirt_type": "perobject"
+	"elefant_foot_compensation_layers": "1"
 }
@@ -1,15 +1,14 @@
 {
 	"type": "process",
-	"name": "0.50mm Draft 0.8 nozzle @Blocks_Pro_S100",
+	"name": "0.50mm Draft 0.8 nozzle @Blocks",
 	"inherits": "fdm_process_common 0.8 nozzle",
 	"from": "system",
-	"setting_id": "oAhgUZdADR7kP87e",
+	"setting_id": "vOtZHrDS88Shmf2m",
 	"instantiation": "true",
 	"bottom_shell_layers": "3",
 	"top_shell_layers": "4",
 	"layer_height": "0.50",
 	"compatible_printers": [
 		"BLOCKS Pro S100 0.8 nozzle"
-	],
-	"renamed_from": "0.50mm Draft 0.8 nozzle @Blocks"
+	]
 }
@@ -1,15 +1,14 @@
 {
 	"type": "process",
-	"name": "0.50mm Optimal 1.2 nozzle @Blocks_Pro_S100",
+	"name": "0.50mm Optimal 1.2 nozzle @Blocks",
 	"inherits": "fdm_process_common 1.2 nozzle",
 	"from": "system",
-	"setting_id": "0eqNgX26jemsBfV5",
+	"setting_id": "BKrEAKqDYzdH43wc",
 	"instantiation": "true",
 	"bottom_shell_layers": "2",
 	"top_shell_layers": "3",
 	"layer_height": "0.50",
 	"compatible_printers": [
 		"BLOCKS Pro S100 1.2 nozzle"
-	],
-	"renamed_from": "0.50mm Optimal 1.2 nozzle @Blocks"
+	]
 }
@@ -1,15 +1,14 @@
 {
 	"type": "process",
-	"name": "0.50mm Standard 1.0 nozzle @Blocks_Pro_S100",
+	"name": "0.50mm Standard 1.0 nozzle @Blocks",
 	"inherits": "fdm_process_common 1.0 nozzle",
 	"from": "system",
-	"setting_id": "z1qCW1cEMc4QvBbV",
+	"setting_id": "D40iksDm7mFjhSKn",
 	"instantiation": "true",
 	"bottom_shell_layers": "3",
 	"top_shell_layers": "3",
 	"layer_height": "0.50",
 	"compatible_printers": [
 		"BLOCKS Pro S100 1.0 nozzle"
-	],
-	"renamed_from": "0.50mm Standard 1.0 nozzle @Blocks"
+	]
 }
@@ -21,7 +21,7 @@
 	"top_solid_infill_flow_ratio": "0.97",
 	"bottom_solid_infill_flow_ratio": "1.08",
 	"seam_position": "aligned",
-	"sparse_infill_pattern": "grid",
+	"sparse_infill_patter": "grid",
 	"initial_layer_speed": "60",
 	"initial_layer_infill_speed": "80",
 	"initial_travel_speed": "100%",
@@ -57,7 +57,5 @@
 	"accel_to_decel_enable": "1",
 	"accel_to_decel_factor": "50%",
 	"elefant_foot_compensation": "0.25",
-	"elefant_foot_compensation_layers": "1",
-	"skirt_loops": "2",
-	"skirt_type": "perobject"
+	"elefant_foot_compensation_layers": "1"
 }
@@ -1,15 +1,14 @@
 {
 	"type": "process",
-	"name": "0.60mm Draft 1.0 nozzle @Blocks_Pro_S100",
+	"name": "0.60mm Draft 1.0 nozzle @Blocks",
 	"inherits": "fdm_process_common 1.0 nozzle",
 	"from": "system",
-	"setting_id": "gTTgtfG8qb9My3hH",
+	"setting_id": "UJUe8XCBzZf8NyCL",
 	"instantiation": "true",
 	"bottom_shell_layers": "2",
 	"top_shell_layers": "3",
 	"layer_height": "0.60",
 	"compatible_printers": [
 		"BLOCKS Pro S100 1.0 nozzle"
-	],
-	"renamed_from": "0.60mm Draft 1.0 nozzle @Blocks"
+	]
 }
@@ -1,15 +1,14 @@
 {
 	"type": "process",
-	"name": "0.60mm Standard 1.2 nozzle @Blocks_Pro_S100",
+	"name": "0.60mm Standard 1.2 nozzle @Blocks",
 	"inherits": "fdm_process_common 1.2 nozzle",
 	"from": "system",
-	"setting_id": "ApcyToENCIANrI71",
+	"setting_id": "PSBFrTykpkytPI2Q",
 	"instantiation": "true",
 	"bottom_shell_layers": "2",
 	"top_shell_layers": "3",
 	"layer_height": "0.60",
 	"compatible_printers": [
 		"BLOCKS Pro S100 1.2 nozzle"
-	],
-	"renamed_from": "0.60mm Standard 1.2 nozzle @Blocks"
+	]
 }
@@ -1,15 +1,14 @@
 {
 	"type": "process",
-	"name": "0.70mm Draft 1.2 nozzle @Blocks_Pro_S100",
+	"name": "0.70mm Draft 1.2 nozzle @Blocks",
 	"inherits": "fdm_process_common 1.2 nozzle",
 	"from": "system",
-	"setting_id": "DEv7X7zaTfxRQmjo",
+	"setting_id": "0ZQ0USGX9SwAKr29",
 	"instantiation": "true",
 	"bottom_shell_layers": "2",
 	"top_shell_layers": "3",
 	"layer_height": "0.70",
 	"compatible_printers": [
 		"BLOCKS Pro S100 1.2 nozzle"
-	],
-	"renamed_from": "0.70mm Draft 1.2 nozzle @Blocks"
+	]
 }
@@ -1,15 +1,14 @@
 {
 	"type": "process",
-	"name": "0.70mm Extra Draft 1.0 nozzle @Blocks_Pro_S100",
+	"name": "0.70mm Extra Draft 1.0 nozzle @Blocks",
 	"inherits": "fdm_process_common 1.0 nozzle",
 	"from": "system",
-	"setting_id": "nUW7N9dJmTyQT4AG",
+	"setting_id": "69PFmjOVFBOIp3Qg",
 	"instantiation": "true",
 	"bottom_shell_layers": "2",
 	"top_shell_layers": "3",
 	"layer_height": "0.70",
 	"compatible_printers": [
 		"BLOCKS Pro S100 1.0 nozzle"
-	],
-	"renamed_from": "0.70mm Extra Draft 1.0 nozzle @Blocks"
+	]
 }
@@ -1,15 +1,14 @@
 {
 	"type": "process",
-	"name": "0.80mm Extra Draft 1.2 nozzle @Blocks_Pro_S100",
+	"name": "0.80mm Extra Draft 1.2 nozzle @Blocks",
 	"inherits": "fdm_process_common 1.2 nozzle",
 	"from": "system",
-	"setting_id": "JMy62SonRfK0cAdL",
+	"setting_id": "iBwRI5JJewW5HJSv",
 	"instantiation": "true",
 	"bottom_shell_layers": "2",
 	"top_shell_layers": "2",
 	"layer_height": "0.80",
 	"compatible_printers": [
 		"BLOCKS Pro S100 1.2 nozzle"
-	],
-	"renamed_from": "0.80mm Extra Draft 1.2 nozzle @Blocks"
+	]
 }
@@ -1,6 +1,6 @@
 {
 	"name": "OrcaFilamentLibrary",
-	"version": "02.04.00.13",
+	"version": "02.04.00.12",
 	"force_update": "0",
 	"description": "Orca Filament Library",
 	"filament_list": [
@@ -6,7 +6,7 @@
 	"filament_id": "OFvgE0Zh",
 	"instantiation": "false",
 	"fan_cooling_layer_time": [
-		"81"
+		"80"
 	],
 	"fan_min_speed": [
 		"50"
@@ -642,162 +642,6 @@ static void load_default_gcodes_to_config(DynamicPrintConfig& config, Preset::Ty
    }
 }

-static int load_assemble_plate_list(std::string config_file, std::vector<assemble_plate_info_t> &assemble_plate_info_list)
-{
-    int ret = 0;
-    boost::filesystem::path directory_path(config_file);
-
-    BOOST_LOG_TRIVIAL(info) << boost::format("%1% enter, file %2%")%__FUNCTION__ % config_file;
-    if (!fs::exists(directory_path)) {
-        BOOST_LOG_TRIVIAL(error) << boost::format("directory %1% not exist.")%config_file;
-        return CLI_FILE_NOTFOUND;
-    }
-
-    try {
-        json root_json;
-        boost::nowide::ifstream ifs(config_file);
-        ifs >> root_json;
-        ifs.close();
-
-        int plate_count = root_json[JSON_ASSEMPLE_PLATES].size();
-        if ((plate_count <= 0) || (plate_count > MAX_PLATE_COUNT)) {
-            BOOST_LOG_TRIVIAL(error) << __FUNCTION__<< boost::format(": invalid plate count %1%")%plate_count;
-            return CLI_CONFIG_FILE_ERROR;
-        }
-        assemble_plate_info_list.resize(plate_count);
-
-        for (int plate_index = 0; plate_index < plate_count; plate_index++)
-        {
-            assemble_plate_info_t &assemble_plate = assemble_plate_info_list[plate_index];
-            const json& plate_json = root_json[JSON_ASSEMPLE_PLATES][plate_index];
-            assemble_plate.plate_name = plate_json[JSON_ASSEMPLE_PLATE_NAME];
-            assemble_plate.need_arrange = plate_json[JSON_ASSEMPLE_PLATE_NEED_ARRANGE];
-
-            if (plate_json.contains(JSON_ASSEMPLE_PLATE_PARAMS)) {
-                assemble_plate.plate_params = plate_json[JSON_ASSEMPLE_PLATE_PARAMS].get<std::map<std::string, std::string>>();
-                BOOST_LOG_TRIVIAL(debug) << boost::format("Plate %1%, has %2% plate params") % (plate_index + 1)  % assemble_plate.plate_params.size();
-            }
-
-            int object_count = plate_json[JSON_ASSEMPLE_OBJECTS].size();
-            if (object_count <= 0) {
-                BOOST_LOG_TRIVIAL(error) << __FUNCTION__<< boost::format(": invalid object count %1% in plate %2%")%object_count %(plate_index+1);
-                return CLI_CONFIG_FILE_ERROR;
-            }
-
-            assemble_plate.assemble_obj_list.resize(object_count);
-            for (int object_index = 0; object_index < object_count; object_index++)
-            {
-                assemble_object_info_t& assemble_object = assemble_plate.assemble_obj_list[object_index];
-                const json& object_json = plate_json[JSON_ASSEMPLE_OBJECTS][object_index];
-
-                assemble_object.path = object_json[JSON_ASSEMPLE_OBJECT_PATH];
-                assemble_object.count = object_json[JSON_ASSEMPLE_OBJECT_COUNT];
-
-                if (assemble_object.count <= 0) {
-                    BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": invalid object clone count %1% in plate %2% Object %3%") % assemble_object.count % (plate_index + 1) % assemble_object.path;
-                    return CLI_CONFIG_FILE_ERROR;
-                }
-
-                assemble_object.filaments = object_json.at(JSON_ASSEMPLE_OBJECT_FILAMENTS).get<std::vector<int>>();
-                if ((assemble_object.filaments.size() > 0) && (assemble_object.filaments.size() != assemble_object.count) && (assemble_object.filaments.size() != 1))
-                {
-                    BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": object %1%'s filaments count %2% not equal to clone count %3%, also not equal to 1") % assemble_object.path % assemble_object.filaments.size() % assemble_object.count;
-                    return CLI_CONFIG_FILE_ERROR;
-                }
-
-                if (object_json.contains(JSON_ASSEMPLE_OBJECT_ASSEMBLE_INDEX)) {
-                    assemble_object.assemble_index = object_json[JSON_ASSEMPLE_OBJECT_ASSEMBLE_INDEX].get<std::vector<int>>();
-                    if ((assemble_object.assemble_index.size() > 0) && (assemble_object.assemble_index.size() != assemble_object.count) && (assemble_object.assemble_index.size() != 1))
-                    {
-                        BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": object %1%'s assemble_index count %2% not equal to clone count %3%, also not equal to 1") % assemble_object.path % assemble_object.assemble_index.size() % assemble_object.count;
-                        return CLI_CONFIG_FILE_ERROR;
-                    }
-                }
-
-                if (object_json.contains(JSON_ASSEMPLE_OBJECT_POS_X)) {
-                    assemble_object.pos_x = object_json[JSON_ASSEMPLE_OBJECT_POS_X].get<std::vector<float>>();
-                    if ((assemble_object.pos_x.size() > 0) && (assemble_object.pos_x.size() != assemble_object.count) && (assemble_object.pos_x.size() != 1))
-                    {
-                        BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": object %1%'s pos_x count %2% not equal to clone count %3%, also not equal to 1") % assemble_object.path % assemble_object.pos_x.size() % assemble_object.count;
-                        return CLI_CONFIG_FILE_ERROR;
-                    }
-                }
-                if (object_json.contains(JSON_ASSEMPLE_OBJECT_POS_Y)) {
-                    assemble_object.pos_y = object_json[JSON_ASSEMPLE_OBJECT_POS_Y].get<std::vector<float>>();
-                    if ((assemble_object.pos_y.size() > 0) && (assemble_object.pos_y.size() != assemble_object.count) && (assemble_object.pos_y.size() != 1))
-                    {
-                        BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": object %1%'s pos_y count %2% not equal to clone count %3%, also not equal to 1") % assemble_object.path % assemble_object.pos_y.size() % assemble_object.count;
-                        return CLI_CONFIG_FILE_ERROR;
-                    }
-                }
-                if (object_json.contains(JSON_ASSEMPLE_OBJECT_POS_Z)) {
-                    assemble_object.pos_z = object_json[JSON_ASSEMPLE_OBJECT_POS_Z].get<std::vector<float>>();
-                    if ((assemble_object.pos_z.size() > 0) && (assemble_object.pos_z.size() != assemble_object.count) && (assemble_object.pos_z.size() != 1))
-                    {
-                        BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": object %1%'s pos_z count %2% not equal to clone count %3%, also not equal to 1") % assemble_object.path % assemble_object.pos_z.size() % assemble_object.count;
-                        return CLI_CONFIG_FILE_ERROR;
-                    }
-                }
-                if (object_json.contains(JSON_ASSEMPLE_OBJECT_PRINT_PARAMS)) {
-                    assemble_object.print_params = object_json[JSON_ASSEMPLE_OBJECT_PRINT_PARAMS].get<std::map<std::string, std::string>>();
-                    BOOST_LOG_TRIVIAL(debug) << boost::format("Plate %1%, object %2% has %3% print params") % (plate_index + 1) %assemble_object.path % assemble_object.print_params.size();
-                }
-                if (object_json.contains(JSON_ASSEMPLE_OBJECT_HEIGHT_RANGES)) {
-                    json height_range_json = object_json[JSON_ASSEMPLE_OBJECT_HEIGHT_RANGES];
-                    int range_count = height_range_json.size();
-
-                    BOOST_LOG_TRIVIAL(debug) << boost::format("Plate %1%, object %2% has %3% height ranges") % (plate_index + 1) %assemble_object.path % range_count;
-
-                    assemble_object.height_ranges.resize(range_count);
-                    for (int range_index = 0; range_index < range_count; range_index++)
-                    {
-                        height_range_info_t& height_range = assemble_object.height_ranges[range_index];
-                        height_range.min_z = height_range_json[range_index][JSON_ASSEMPLE_OBJECT_MIN_Z];
-                        height_range.max_z = height_range_json[range_index][JSON_ASSEMPLE_OBJECT_MAX_Z];
-                        height_range.range_params = height_range_json[range_index][JSON_ASSEMPLE_OBJECT_RANGE_PARAMS].get<std::map<std::string, std::string>>();
-                    }
-                }
-            }
-            if (plate_json.contains(JSON_ASSEMPLE_ASSEMBLE_PARAMS)) {
-                json assemble_params_json = plate_json[JSON_ASSEMPLE_ASSEMBLE_PARAMS];
-                int assemble_count = assemble_params_json.size();
-                for (int i = 0; i < assemble_count; i++)
-                {
-                    assembled_param_info_t assembled_param;
-                    int assemble_index = assemble_params_json[i][JSON_ASSEMPLE_OBJECT_ASSEMBLE_INDEX];
-                    if (assemble_params_json[i].contains(JSON_ASSEMPLE_OBJECT_PRINT_PARAMS)) {
-                        assembled_param.print_params = assemble_params_json[i][JSON_ASSEMPLE_OBJECT_PRINT_PARAMS].get<std::map<std::string, std::string>>();
-                        BOOST_LOG_TRIVIAL(debug) << boost::format("Plate %1%, assemble object %2% has %3% print params") % (plate_index + 1) %i % assembled_param.print_params.size();
-                    }
-                    if (assemble_params_json[i].contains(JSON_ASSEMPLE_OBJECT_HEIGHT_RANGES)) {
-                        json height_range_json = assemble_params_json[i][JSON_ASSEMPLE_OBJECT_HEIGHT_RANGES];
-                        int range_count = height_range_json.size();
-
-                        BOOST_LOG_TRIVIAL(debug) << boost::format("Plate %1%, assemble object %2% has %3% height ranges") % (plate_index + 1) %i % range_count;
-
-                        assembled_param.height_ranges.resize(range_count);
-                        for (int range_index = 0; range_index < range_count; range_index++)
-                        {
-                            height_range_info_t& height_range = assembled_param.height_ranges[range_index];
-                            height_range.min_z = height_range_json[range_index][JSON_ASSEMPLE_OBJECT_MIN_Z];
-                            height_range.max_z = height_range_json[range_index][JSON_ASSEMPLE_OBJECT_MAX_Z];
-                            height_range.range_params = height_range_json[range_index][JSON_ASSEMPLE_OBJECT_RANGE_PARAMS].get<std::map<std::string, std::string>>();
-                        }
-                    }
-                    assemble_plate.assembled_param_list.emplace(assemble_index, std::move(assembled_param));
-                }
-                BOOST_LOG_TRIVIAL(debug) << boost::format("Plate %1%, has %2% plate params") % (plate_index + 1)  % assemble_plate.plate_params.size();
-            }
-        }
-    }
-    catch(std::exception &err) {
-        BOOST_LOG_TRIVIAL(error) << __FUNCTION__<< ": parse file "<<config_file<<" got a generic exception, reason = " << err.what();
-        ret = CLI_CONFIG_FILE_ERROR;
-    }
-
-    return ret;
-}
-
 void merge_or_add_object(assemble_plate_info_t& assemble_plate_info, Model &model, int assemble_index, std::map<int, ModelObject*> &merged_objects, ModelObject *ori_object)
 {
    if (assemble_index > 0) {
@@ -1863,6 +1707,14 @@ int CLI::run(int argc, char **argv)

                    BOOST_LOG_TRIVIAL(info) << boost::format("current_printer_name %1%, current_process_name %2%")%current_printer_name %current_process_name;
                    ConfigOptionStrings* option_strings = config.option<ConfigOptionStrings>("inherits_group");
+                    // One entry for the process, one per filament and one for the printer. A group of another
+                    // length still has the process first and the printer last; one too short for that is ignored.
+                    if (option_strings && option_strings->values.size() != current_filaments_name.size() + 2) {
+                        boost::nowide::cerr << "Warning: inherits_group has " << option_strings->values.size() << " entries, expected "
+                                            << current_filaments_name.size() + 2 << " for " << current_filaments_name.size() << " filaments" << std::endl;
+                        if (option_strings->values.size() < 2)
+                            option_strings = nullptr;
+                    }
                    if (option_strings) {
                        current_inherits_group = option_strings->values;
                        size_t size = current_inherits_group.size();
@@ -1884,16 +1736,13 @@ int CLI::run(int argc, char **argv)
                            BOOST_LOG_TRIVIAL(info) << boost::format("inherits of process valid, current_process_system_name is %1%") %current_process_system_name;
                        }

-                        current_filaments_system_name.resize(size - 2);
-                        for (int index = 1; index < (size - 1); index++) {
-                            if (current_inherits_group[index].empty()) {
-                                current_filaments_system_name[index-1] = current_filaments_name[index-1];
-                            }
-                            else {
+                        // A filament without an entry of its own counts as a system preset.
+                        current_filaments_system_name = current_filaments_name;
+                        for (size_t index = 1; index < size - 1 && index <= current_filaments_name.size(); index++) {
+                            if (!current_inherits_group[index].empty())
                                current_filaments_system_name[index-1] = current_inherits_group[index];
                        }
                    }
-                    }
                    else {
                        current_printer_system_name = current_printer_name;
                        current_process_system_name = current_process_name;
@@ -2023,7 +1872,12 @@ int CLI::run(int argc, char **argv)
        //parse the json and assemble object here
        Model model;

-        int ret = load_assemble_plate_list(load_assemble_list, assemble_plate_info_list);
+        AssembleListResult list_result = load_assemble_plate_list(load_assemble_list, assemble_plate_info_list, MAX_PLATE_COUNT);
+        int ret = CLI_SUCCESS;
+        if (list_result == AssembleListResult::FileNotFound)
+            ret = CLI_FILE_NOTFOUND;
+        else if (list_result == AssembleListResult::ConfigError)
+            ret = CLI_CONFIG_FILE_ERROR;
        if (ret) {
            record_exit_reson(outfile_dir, ret, 0, cli_errors[ret], sliced_info);
            flush_and_exit(ret);
@@ -4733,6 +4587,11 @@ int CLI::run(int argc, char **argv)
                record_exit_reson(outfile_dir, CLI_INVALID_PARAMS, 0, cli_errors[CLI_INVALID_PARAMS], sliced_info);
                flush_and_exit(CLI_INVALID_PARAMS);
            }
+            if (m_models.empty()) {
+                boost::nowide::cerr << "Invalid params: --assemble needs at least one input model." << std::endl;
+                record_exit_reson(outfile_dir, CLI_INVALID_PARAMS, 0, cli_errors[CLI_INVALID_PARAMS], sliced_info);
+                flush_and_exit(CLI_INVALID_PARAMS);
+            }
            Model m;
            ModelObject* new_object = m.add_object();
            new_object->name = _u8L("Assembly");
@@ -5673,7 +5532,7 @@ int CLI::run(int argc, char **argv)
                        float w = dynamic_cast<const ConfigOptionFloat *>(m_print_config.option("prime_tower_width"))->value;
                        float a = dynamic_cast<const ConfigOptionFloat *>(m_print_config.option("wipe_tower_rotation_angle"))->value;
                        float v = dynamic_cast<const ConfigOptionFloat *>(m_print_config.option("prime_volume"))->value;
-                        unsigned int filaments_cnt = plate_data_src[plate_to_slice-1]->slice_filaments_info.size();
+                        unsigned int filaments_cnt = (plate_data_src.size() >= static_cast<size_t>(plate_to_slice)) ? plate_data_src[plate_to_slice-1]->slice_filaments_info.size() : 0;
                        if ((filaments_cnt == 0) || need_skip)
                        {
                            // slice filaments info invalid
@@ -5,6 +5,7 @@

 #include "libslic3r/Config.hpp"
 #include "libslic3r/Model.hpp"
+#include "libslic3r/Format/AssembleList.hpp"

 namespace Slic3r {

@@ -19,64 +20,6 @@ namespace IO {
    };
 }

-#define JSON_ASSEMPLE_PLATES                   "plates"
-#define JSON_ASSEMPLE_PLATE_PARAMS             "plate_params"
-#define JSON_ASSEMPLE_PLATE_NAME               "plate_name"
-#define JSON_ASSEMPLE_PLATE_NEED_ARRANGE       "need_arrange"
-#define JSON_ASSEMPLE_OBJECTS                  "objects"
-#define JSON_ASSEMPLE_OBJECT_PATH              "path"
-#define JSON_ASSEMPLE_OBJECT_COUNT             "count"
-#define JSON_ASSEMPLE_OBJECT_FILAMENTS         "filaments"
-#define JSON_ASSEMPLE_OBJECT_POS_X             "pos_x"
-#define JSON_ASSEMPLE_OBJECT_POS_Y             "pos_y"
-#define JSON_ASSEMPLE_OBJECT_POS_Z             "pos_z"
-#define JSON_ASSEMPLE_OBJECT_ASSEMBLE_INDEX    "assemble_index"
-#define JSON_ASSEMPLE_OBJECT_PRINT_PARAMS      "print_params"
-#define JSON_ASSEMPLE_ASSEMBLE_PARAMS         "assembled_params"
-
-
-#define JSON_ASSEMPLE_OBJECT_MIN_Z              "min_z"
-#define JSON_ASSEMPLE_OBJECT_MAX_Z              "max_z"
-#define JSON_ASSEMPLE_OBJECT_HEIGHT_RANGES      "height_ranges"
-#define JSON_ASSEMPLE_OBJECT_RANGE_PARAMS       "range_params"
-
-typedef struct _height_range_info {
-    float         min_z;
-    float         max_z;
-
-    std::map<std::string, std::string> range_params;
-}height_range_info_t;
-
-typedef struct _assembled_param_info {
-    std::map<std::string, std::string> print_params;
-    std::vector<height_range_info_t> height_ranges;
-}assembled_param_info_t;
-
-typedef struct _assemble_object_info {
-    std::string         path;
-    int                 count;
-
-    std::vector<int>    filaments;
-    std::vector<int>    assemble_index;
-    std::vector<float>  pos_x;
-    std::vector<float>  pos_y;
-    std::vector<float>  pos_z;
-    std::map<std::string, std::string> print_params;
-    std::vector<height_range_info_t> height_ranges;
-}assemble_object_info_t;
-
-typedef struct _assemble_plate_info {
-    std::string         plate_name;
-    bool                need_arrange {false};
-    int                 filaments_count {0};
-
-    std::map<std::string, std::string> plate_params;
-    std::vector<assemble_object_info_t> assemble_obj_list;
-    std::vector<ModelObject *> loaded_obj_list;
-    std::map<int, assembled_param_info_t> assembled_param_list;
-}assemble_plate_info_t;
-
-
 typedef struct _printer_plate_info {
    std::string         printer_name;
    int                 printable_width{0};
@@ -2673,10 +2673,10 @@ void CadDocument::apply_feature(TopoDS_Shape& result, bool& have_body,
                ridge = pipe.Shape();
                have_ridge = !ridge.IsNull();
            }
-        } catch (const Standard_Failure&) {
-            have_ridge = false; // OCCT failure — on OCCT >= 8 Standard_Failure derives from std::exception, so this handler must come first
        } catch (const std::exception&) {
            have_ridge = false; // fall back to the bare cylinder/bore below
+        } catch (const Standard_Failure&) {
+            have_ridge = false; // OCCT failure (not a std::exception) — must be caught here too
        }

        if (f.thread_internal) {
@@ -15,8 +15,6 @@
 #include <TopExp.hxx>
 #include <TopTools.hxx>
 #include <TopTools_IndexedMapOfShape.hxx>
-#include <TopTools_ListOfShape.hxx>
-#include <TopTools_IndexedDataMapOfShapeListOfShape.hxx>
 #include <Poly_Triangulation.hxx>
 #include <gp_Ax2.hxx>
 #include <gp_Dir.hxx>
@@ -205,6 +205,8 @@ set(lisbslic3r_sources
    Format/3mf.hpp
    Format/AMF.cpp
    Format/AMF.hpp
+    Format/AssembleList.cpp
+    Format/AssembleList.hpp
    Format/DRC.cpp
    Format/DRC.hpp
    Format/bbs_3mf.cpp
@@ -0,0 +1,204 @@
+#include "AssembleList.hpp"
+
+#include <algorithm>
+
+#include <boost/filesystem.hpp>
+#include <boost/format.hpp>
+#include <boost/log/trivial.hpp>
+#include <boost/nowide/fstream.hpp>
+
+#include "nlohmann/json.hpp"
+
+#define JSON_ASSEMPLE_PLATES                   "plates"
+#define JSON_ASSEMPLE_PLATE_PARAMS             "plate_params"
+#define JSON_ASSEMPLE_PLATE_NAME               "plate_name"
+#define JSON_ASSEMPLE_PLATE_NEED_ARRANGE       "need_arrange"
+#define JSON_ASSEMPLE_OBJECTS                  "objects"
+#define JSON_ASSEMPLE_OBJECT_PATH              "path"
+#define JSON_ASSEMPLE_OBJECT_COUNT             "count"
+#define JSON_ASSEMPLE_OBJECT_FILAMENTS         "filaments"
+#define JSON_ASSEMPLE_OBJECT_POS_X             "pos_x"
+#define JSON_ASSEMPLE_OBJECT_POS_Y             "pos_y"
+#define JSON_ASSEMPLE_OBJECT_POS_Z             "pos_z"
+#define JSON_ASSEMPLE_OBJECT_ASSEMBLE_INDEX    "assemble_index"
+#define JSON_ASSEMPLE_OBJECT_PRINT_PARAMS      "print_params"
+#define JSON_ASSEMPLE_ASSEMBLE_PARAMS         "assembled_params"
+
+
+#define JSON_ASSEMPLE_OBJECT_MIN_Z              "min_z"
+#define JSON_ASSEMPLE_OBJECT_MAX_Z              "max_z"
+#define JSON_ASSEMPLE_OBJECT_HEIGHT_RANGES      "height_ranges"
+#define JSON_ASSEMPLE_OBJECT_RANGE_PARAMS       "range_params"
+
+namespace Slic3r {
+
+using json = nlohmann::json;
+
+AssembleListResult load_assemble_plate_list(const std::string &config_file, std::vector<assemble_plate_info_t> &assemble_plate_info_list, int max_plate_count)
+{
+    AssembleListResult ret = AssembleListResult::Success;
+    boost::filesystem::path directory_path(config_file);
+
+    BOOST_LOG_TRIVIAL(info) << boost::format("%1% enter, file %2%")%__FUNCTION__ % config_file;
+    if (!boost::filesystem::exists(directory_path)) {
+        BOOST_LOG_TRIVIAL(error) << boost::format("directory %1% not exist.")%config_file;
+        return AssembleListResult::FileNotFound;
+    }
+
+    try {
+        json root_json;
+        boost::nowide::ifstream ifs(config_file);
+        ifs >> root_json;
+        ifs.close();
+
+        int plate_count = root_json[JSON_ASSEMPLE_PLATES].size();
+        if ((plate_count <= 0) || (plate_count > max_plate_count)) {
+            BOOST_LOG_TRIVIAL(error) << __FUNCTION__<< boost::format(": invalid plate count %1%")%plate_count;
+            return AssembleListResult::ConfigError;
+        }
+        assemble_plate_info_list.resize(plate_count);
+
+        for (int plate_index = 0; plate_index < plate_count; plate_index++)
+        {
+            assemble_plate_info_t &assemble_plate = assemble_plate_info_list[plate_index];
+            const json& plate_json = root_json[JSON_ASSEMPLE_PLATES][plate_index];
+            assemble_plate.plate_name = plate_json[JSON_ASSEMPLE_PLATE_NAME];
+            assemble_plate.need_arrange = plate_json[JSON_ASSEMPLE_PLATE_NEED_ARRANGE];
+
+            if (plate_json.contains(JSON_ASSEMPLE_PLATE_PARAMS)) {
+                assemble_plate.plate_params = plate_json[JSON_ASSEMPLE_PLATE_PARAMS].get<std::map<std::string, std::string>>();
+                BOOST_LOG_TRIVIAL(debug) << boost::format("Plate %1%, has %2% plate params") % (plate_index + 1)  % assemble_plate.plate_params.size();
+            }
+
+            int object_count = plate_json[JSON_ASSEMPLE_OBJECTS].size();
+            if (object_count <= 0) {
+                BOOST_LOG_TRIVIAL(error) << __FUNCTION__<< boost::format(": invalid object count %1% in plate %2%")%object_count %(plate_index+1);
+                return AssembleListResult::ConfigError;
+            }
+
+            assemble_plate.assemble_obj_list.resize(object_count);
+            for (int object_index = 0; object_index < object_count; object_index++)
+            {
+                assemble_object_info_t& assemble_object = assemble_plate.assemble_obj_list[object_index];
+                const json& object_json = plate_json[JSON_ASSEMPLE_OBJECTS][object_index];
+
+                assemble_object.path = object_json[JSON_ASSEMPLE_OBJECT_PATH];
+                assemble_object.count = object_json[JSON_ASSEMPLE_OBJECT_COUNT];
+
+                if (assemble_object.count <= 0) {
+                    BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": invalid object clone count %1% in plate %2% Object %3%") % assemble_object.count % (plate_index + 1) % assemble_object.path;
+                    return AssembleListResult::ConfigError;
+                }
+
+                assemble_object.filaments = object_json.at(JSON_ASSEMPLE_OBJECT_FILAMENTS).get<std::vector<int>>();
+                if (assemble_object.filaments.empty())
+                {
+                    BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": object %1%'s filaments list is empty") % assemble_object.path;
+                    return AssembleListResult::ConfigError;
+                }
+                if ((assemble_object.filaments.size() != assemble_object.count) && (assemble_object.filaments.size() != 1))
+                {
+                    BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": object %1%'s filaments count %2% not equal to clone count %3%, also not equal to 1") % assemble_object.path % assemble_object.filaments.size() % assemble_object.count;
+                    return AssembleListResult::ConfigError;
+                }
+                // 0 keeps the default filament, as it does for --load-filament-ids.
+                if (std::any_of(assemble_object.filaments.begin(), assemble_object.filaments.end(), [](int id) { return id < 0; }))
+                {
+                    BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": object %1% has a negative filament id") % assemble_object.path;
+                    return AssembleListResult::ConfigError;
+                }
+
+                if (object_json.contains(JSON_ASSEMPLE_OBJECT_ASSEMBLE_INDEX)) {
+                    assemble_object.assemble_index = object_json[JSON_ASSEMPLE_OBJECT_ASSEMBLE_INDEX].get<std::vector<int>>();
+                    if ((assemble_object.assemble_index.size() > 0) && (assemble_object.assemble_index.size() != assemble_object.count) && (assemble_object.assemble_index.size() != 1))
+                    {
+                        BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": object %1%'s assemble_index count %2% not equal to clone count %3%, also not equal to 1") % assemble_object.path % assemble_object.assemble_index.size() % assemble_object.count;
+                        return AssembleListResult::ConfigError;
+                    }
+                }
+
+                if (object_json.contains(JSON_ASSEMPLE_OBJECT_POS_X)) {
+                    assemble_object.pos_x = object_json[JSON_ASSEMPLE_OBJECT_POS_X].get<std::vector<float>>();
+                    if ((assemble_object.pos_x.size() > 0) && (assemble_object.pos_x.size() != assemble_object.count) && (assemble_object.pos_x.size() != 1))
+                    {
+                        BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": object %1%'s pos_x count %2% not equal to clone count %3%, also not equal to 1") % assemble_object.path % assemble_object.pos_x.size() % assemble_object.count;
+                        return AssembleListResult::ConfigError;
+                    }
+                }
+                if (object_json.contains(JSON_ASSEMPLE_OBJECT_POS_Y)) {
+                    assemble_object.pos_y = object_json[JSON_ASSEMPLE_OBJECT_POS_Y].get<std::vector<float>>();
+                    if ((assemble_object.pos_y.size() > 0) && (assemble_object.pos_y.size() != assemble_object.count) && (assemble_object.pos_y.size() != 1))
+                    {
+                        BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": object %1%'s pos_y count %2% not equal to clone count %3%, also not equal to 1") % assemble_object.path % assemble_object.pos_y.size() % assemble_object.count;
+                        return AssembleListResult::ConfigError;
+                    }
+                }
+                if (object_json.contains(JSON_ASSEMPLE_OBJECT_POS_Z)) {
+                    assemble_object.pos_z = object_json[JSON_ASSEMPLE_OBJECT_POS_Z].get<std::vector<float>>();
+                    if ((assemble_object.pos_z.size() > 0) && (assemble_object.pos_z.size() != assemble_object.count) && (assemble_object.pos_z.size() != 1))
+                    {
+                        BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": object %1%'s pos_z count %2% not equal to clone count %3%, also not equal to 1") % assemble_object.path % assemble_object.pos_z.size() % assemble_object.count;
+                        return AssembleListResult::ConfigError;
+                    }
+                }
+                if (object_json.contains(JSON_ASSEMPLE_OBJECT_PRINT_PARAMS)) {
+                    assemble_object.print_params = object_json[JSON_ASSEMPLE_OBJECT_PRINT_PARAMS].get<std::map<std::string, std::string>>();
+                    BOOST_LOG_TRIVIAL(debug) << boost::format("Plate %1%, object %2% has %3% print params") % (plate_index + 1) %assemble_object.path % assemble_object.print_params.size();
+                }
+                if (object_json.contains(JSON_ASSEMPLE_OBJECT_HEIGHT_RANGES)) {
+                    json height_range_json = object_json[JSON_ASSEMPLE_OBJECT_HEIGHT_RANGES];
+                    int range_count = height_range_json.size();
+
+                    BOOST_LOG_TRIVIAL(debug) << boost::format("Plate %1%, object %2% has %3% height ranges") % (plate_index + 1) %assemble_object.path % range_count;
+
+                    assemble_object.height_ranges.resize(range_count);
+                    for (int range_index = 0; range_index < range_count; range_index++)
+                    {
+                        height_range_info_t& height_range = assemble_object.height_ranges[range_index];
+                        height_range.min_z = height_range_json[range_index][JSON_ASSEMPLE_OBJECT_MIN_Z];
+                        height_range.max_z = height_range_json[range_index][JSON_ASSEMPLE_OBJECT_MAX_Z];
+                        height_range.range_params = height_range_json[range_index][JSON_ASSEMPLE_OBJECT_RANGE_PARAMS].get<std::map<std::string, std::string>>();
+                    }
+                }
+            }
+            if (plate_json.contains(JSON_ASSEMPLE_ASSEMBLE_PARAMS)) {
+                json assemble_params_json = plate_json[JSON_ASSEMPLE_ASSEMBLE_PARAMS];
+                int assemble_count = assemble_params_json.size();
+                for (int i = 0; i < assemble_count; i++)
+                {
+                    assembled_param_info_t assembled_param;
+                    int assemble_index = assemble_params_json[i][JSON_ASSEMPLE_OBJECT_ASSEMBLE_INDEX];
+                    if (assemble_params_json[i].contains(JSON_ASSEMPLE_OBJECT_PRINT_PARAMS)) {
+                        assembled_param.print_params = assemble_params_json[i][JSON_ASSEMPLE_OBJECT_PRINT_PARAMS].get<std::map<std::string, std::string>>();
+                        BOOST_LOG_TRIVIAL(debug) << boost::format("Plate %1%, assemble object %2% has %3% print params") % (plate_index + 1) %i % assembled_param.print_params.size();
+                    }
+                    if (assemble_params_json[i].contains(JSON_ASSEMPLE_OBJECT_HEIGHT_RANGES)) {
+                        json height_range_json = assemble_params_json[i][JSON_ASSEMPLE_OBJECT_HEIGHT_RANGES];
+                        int range_count = height_range_json.size();
+
+                        BOOST_LOG_TRIVIAL(debug) << boost::format("Plate %1%, assemble object %2% has %3% height ranges") % (plate_index + 1) %i % range_count;
+
+                        assembled_param.height_ranges.resize(range_count);
+                        for (int range_index = 0; range_index < range_count; range_index++)
+                        {
+                            height_range_info_t& height_range = assembled_param.height_ranges[range_index];
+                            height_range.min_z = height_range_json[range_index][JSON_ASSEMPLE_OBJECT_MIN_Z];
+                            height_range.max_z = height_range_json[range_index][JSON_ASSEMPLE_OBJECT_MAX_Z];
+                            height_range.range_params = height_range_json[range_index][JSON_ASSEMPLE_OBJECT_RANGE_PARAMS].get<std::map<std::string, std::string>>();
+                        }
+                    }
+                    assemble_plate.assembled_param_list.emplace(assemble_index, std::move(assembled_param));
+                }
+                BOOST_LOG_TRIVIAL(debug) << boost::format("Plate %1%, has %2% plate params") % (plate_index + 1)  % assemble_plate.plate_params.size();
+            }
+        }
+    }
+    catch(std::exception &err) {
+        BOOST_LOG_TRIVIAL(error) << __FUNCTION__<< ": parse file "<<config_file<<" got a generic exception, reason = " << err.what();
+        ret = AssembleListResult::ConfigError;
+    }
+
+    return ret;
+}
+
+} // namespace Slic3r
@@ -0,0 +1,60 @@
+#ifndef slic3r_Format_AssembleList_hpp_
+#define slic3r_Format_AssembleList_hpp_
+
+#include <map>
+#include <string>
+#include <vector>
+
+namespace Slic3r {
+
+class ModelObject;
+
+typedef struct _height_range_info {
+    float         min_z;
+    float         max_z;
+
+    std::map<std::string, std::string> range_params;
+}height_range_info_t;
+
+typedef struct _assembled_param_info {
+    std::map<std::string, std::string> print_params;
+    std::vector<height_range_info_t> height_ranges;
+}assembled_param_info_t;
+
+typedef struct _assemble_object_info {
+    std::string         path;
+    int                 count;
+
+    std::vector<int>    filaments;
+    std::vector<int>    assemble_index;
+    std::vector<float>  pos_x;
+    std::vector<float>  pos_y;
+    std::vector<float>  pos_z;
+    std::map<std::string, std::string> print_params;
+    std::vector<height_range_info_t> height_ranges;
+}assemble_object_info_t;
+
+typedef struct _assemble_plate_info {
+    std::string         plate_name;
+    bool                need_arrange {false};
+    int                 filaments_count {0};
+
+    std::map<std::string, std::string> plate_params;
+    std::vector<assemble_object_info_t> assemble_obj_list;
+    std::vector<ModelObject *> loaded_obj_list;
+    std::map<int, assembled_param_info_t> assembled_param_list;
+}assemble_plate_info_t;
+
+enum class AssembleListResult {
+    Success,
+    FileNotFound,
+    // Malformed JSON, a missing required field, or a value that fails validation.
+    ConfigError
+};
+
+// Read the JSON assemble list used by the CLI's --load-assemble-list into one entry per plate.
+AssembleListResult load_assemble_plate_list(const std::string &config_file, std::vector<assemble_plate_info_t> &assemble_plate_info_list, int max_plate_count);
+
+} // namespace Slic3r
+
+#endif /* slic3r_Format_AssembleList_hpp_ */
@@ -25,7 +25,6 @@
 #include "XCAFDoc_DocumentTool.hxx"
 #include "XCAFDoc_ShapeTool.hxx"
 #include "XCAFApp_Application.hxx"
-#include "TDF_LabelSequence.hxx"
 #include "TopoDS_Solid.hxx"
 #include "TopoDS_Compound.hxx"
 #include "TopoDS_Builder.hxx"
@@ -2504,8 +2504,7 @@ void GCode::do_export(Print* print, const char* path, GCodeProcessorResult* resu

    {
        LifecycleEventContext ctx;
-        ctx.id = std::to_string(print->model().id().id);
-        ctx.name = print->get_model_name();
+        ctx.name = std::to_string(print->model().id().id);
        ctx.code = LifecycleEvtCode::Ok;
        ctx.msg  = path;
        ctx.cancellation_check = [print]() { return print->canceled(); };
@@ -2557,8 +2556,7 @@ void GCode::do_export(Print* print, const char* path, GCodeProcessorResult* resu
        }
        {
            LifecycleEventContext ctx;
-            ctx.id = std::to_string(print->model().id().id);
-            ctx.name = print->get_model_name();
+            ctx.name = std::to_string(print->model().id().id);
            ctx.code = LifecycleEvtCode::Error;
            ctx.msg  = std::string(path) + "\n" + err_msg;
            ctx.cancellation_check = [print]() { return print->canceled(); };
@@ -2582,8 +2580,7 @@ void GCode::do_export(Print* print, const char* path, GCodeProcessorResult* resu
        boost::nowide::remove(path_tmp.c_str());
        {
            LifecycleEventContext ctx;
-            ctx.id = std::to_string(print->model().id().id);
-            ctx.name = print->get_model_name();
+            ctx.name = std::to_string(print->model().id().id);
            ctx.code = LifecycleEvtCode::Error;
            ctx.msg  = std::string(path) + "\n" + ex.what();
            ctx.cancellation_check = [print]() { return print->canceled(); };
@@ -2696,8 +2693,7 @@ void GCode::do_export(Print* print, const char* path, GCodeProcessorResult* resu
    if (ret) {
        {
            LifecycleEventContext ctx;
-            ctx.id = std::to_string(print->model().id().id);
-            ctx.name = print->get_model_name();
+            ctx.name = std::to_string(print->model().id().id);
            ctx.code = LifecycleEvtCode::Error;
            ctx.msg  = std::string(path) + "\nFailed to rename the output G-code file: " + ret.message();
            ctx.cancellation_check = [print]() { return print->canceled(); };
@@ -2716,8 +2712,7 @@ void GCode::do_export(Print* print, const char* path, GCodeProcessorResult* resu

    {
        LifecycleEventContext ctx;
-        ctx.id = std::to_string(print->model().id().id);
-        ctx.name = print->get_model_name();
+        ctx.name = std::to_string(print->model().id().id);
        ctx.code = LifecycleEvtCode::Ok;
        ctx.msg  = path;
        ctx.cancellation_check = [print]() { return print->canceled(); };
@@ -7969,20 +7964,6 @@ double GCode::calc_max_volumetric_speed(const double layer_height, const double
    return res;
 }

-// ORCA: Overlap at or below which the overhang fan switches on; negative when it does not depend on overlap
-// (Overhang_threshold_none cools every external perimeter).
-static float overhang_fan_overlap_threshold(int overhang_fan_threshold)
-{
-    switch (overhang_fan_threshold) {
-    case (int) Overhang_threshold_1_4: return 0.9f;
-    case (int) Overhang_threshold_2_4: return 0.75f;
-    case (int) Overhang_threshold_3_4: return 0.5f;
-    case (int) Overhang_threshold_4_4: return 0.25f;
-    case (int) Overhang_threshold_bridge: return 0.05f;
-    default: return -1.f;
-    }
-}
-
 std::string GCode::_extrude(const ExtrusionPath &path, std::string description, double speed)
 {
    std::string gcode;
@@ -8325,13 +8306,6 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
            
            ConfigOptionPercents         overhang_overlap_levels({90, 75, 50, 25, 13, 0});

-            // ORCA: Lets the path be split where the overhang fan switches, not only where the speed changes.
-            // Bridges and overhang perimeters are cooled regardless of overlap.
-            float fan_overlap_threshold = -1.f;
-            if (FILAMENT_CONFIG(enable_overhang_bridge_fan) && m_enable_cooling_markers && path.role() != erBridgeInfill &&
-                path.role() != erOverhangPerimeter)
-                fan_overlap_threshold = overhang_fan_overlap_threshold(FILAMENT_CONFIG(overhang_fan_threshold));
-
            if (NOZZLE_CONFIG(slowdown_for_curled_perimeters)){
                ConfigOptionFloatsOrPercents dynamic_overhang_speeds(
                    {FloatOrPercent{100, true},
@@ -8352,8 +8326,7 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
                         FloatOrPercent{NOZZLE_CONFIG(overhang_4_4_speed).get_abs_value(ref_speed) * 100 / ref_speed, true}});

                new_points = m_extrusion_quality_estimator.estimate_extrusion_quality(path, overhang_overlap_levels, dynamic_overhang_speeds,
-                                                                              ref_speed, speed, NOZZLE_CONFIG(slowdown_for_curled_perimeters),
-                                                                              fan_overlap_threshold);
+                                                                              ref_speed, speed, NOZZLE_CONFIG(slowdown_for_curled_perimeters));
        	}else{
                ConfigOptionFloatsOrPercents dynamic_overhang_speeds(
                                                                     {FloatOrPercent{100, true},
@@ -8372,8 +8345,7 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
                     FloatOrPercent{NOZZLE_CONFIG(bridge_speed) * 100 / ref_speed, true}});

                new_points = m_extrusion_quality_estimator.estimate_extrusion_quality(path, overhang_overlap_levels, dynamic_overhang_speeds,
-                                                                              ref_speed, speed, NOZZLE_CONFIG(slowdown_for_curled_perimeters),
-                                                                              fan_overlap_threshold);
+                                                                              ref_speed, speed, NOZZLE_CONFIG(slowdown_for_curled_perimeters));
            }
            variable_speed = std::any_of(new_points.begin(), new_points.end(),
                                         [speed](const ProcessedPoint &p) { return fabs(double(p.speed) - speed) > 1; }); // Ignore small speed variations (under 1mm/sec)
@@ -8525,10 +8497,28 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description,
      if (role == erBridgeInfill || role == erOverhangPerimeter) { // ORCA: Split out bridge infill to internal and external to apply separate fan settings
        return true;
      }
-      if (overhang_fan_threshold == Overhang_threshold_none)
+      switch (overhang_fan_threshold) {
+      case (int)Overhang_threshold_1_4:
+        return overlap <= 0.9f;
+        break;
+      case (int)Overhang_threshold_2_4:
+        return overlap <= 0.75f;
+        break;
+      case (int)Overhang_threshold_3_4:
+        return overlap <= 0.5f;
+        break;
+      case (int)Overhang_threshold_4_4:
+        return overlap <= 0.25f;
+        break;
+      case (int)Overhang_threshold_bridge:
+        return overlap <= 0.05f;
+        break;
+      case (int)Overhang_threshold_none:
        return is_external_perimeter(role);
-      const float overlap_threshold = overhang_fan_overlap_threshold(overhang_fan_threshold);
-      return overlap_threshold >= 0.f && overlap <= overlap_threshold;
+        break;
+      default:
+        return false;
+      }
    };

    std::string comment;
@@ -41,12 +41,10 @@ std::vector<ExtendedPoint<L::Dim>> estimate_points_properties(const POINTS&
                                                              float                                   flow_width,
                                                              float                                   max_line_length = -1.0f,
                                                              float                                   min_distance    = -1.0f,
-                                                              // Speed an overhang distance prints at. Without it, interior sampling
-                                                              // is skipped and every line over 4mm is split.
-                                                              const std::function<float(float)>&      distance_to_speed = {},
-                                                              // Overlap (1 - distance / flow_width) at or below which the overhang
-                                                              // fan switches on; negative when the fan does not depend on overlap.
-                                                              float                                   fan_overlap_threshold = -1.0f)
+                                                              // Maps an overhang distance onto the speed it will be printed at. Interior sampling
+                                                              // needs it to tell which of the points it could add would change the G-code, and is
+                                                              // skipped without it.
+                                                              const std::function<float(float)>&      distance_to_speed = {})
 {
    bool   looped     = input_points.front() == input_points.back();
    std::function<size_t(size_t,size_t)> get_prev_index = [](size_t idx, size_t count) {
@@ -127,43 +125,29 @@ std::vector<ExtendedPoint<L::Dim>> estimate_points_properties(const POINTS&
        points.push_back(next_point);
    }

-    // ORCA: How an overhang distance prints, which is what the passes below compare. A segment is printed at the lower
-    // of the speeds at its two ends, and with the overhang fan on if the overlap at either end turns it on. A point
-    // added to a path can therefore only change the G-code where it prints at a different speed or fan state from the
-    // points either side of it, and the passes below add points there and nowhere else.
-    const float width_inv = 1.f / flow_width;
-    // Whether an overhang distance turns the overhang fan on. The overlap test check_overhang_fan applies in GCode.cpp.
-    auto fan_on = [fan_overlap_threshold, width_inv](float distance) {
-        return fan_overlap_threshold >= 0.f && 1.f - distance * width_inv <= fan_overlap_threshold;
-    };
-    // Whether two overhang distances are interchangeable ie have the same speed (beyond a 1mm/sec threshold that gcode.cpp filters out on) 
-    // and the same fan state.
-    auto same_speed_and_fan = [&distance_to_speed, &fan_on](float a, float b) {
-        return std::abs(distance_to_speed(a) - distance_to_speed(b)) <= 1.f && fan_on(a) == fan_on(b);
-    };
-    // Whether the first overhang distance prints slower than the second, beyond the 1mm/sec gcode.cpp tolerance, or turns the overhang
-    // fan on where the second does not. Against a supported point (overhang distance 0) it tells whether an end is
-    // affected by the overhang.
-    auto slower_or_cooled = [&distance_to_speed, &fan_on](float a, float b) {
-        return distance_to_speed(a) < distance_to_speed(b) - 1.f || (fan_on(a) && !fan_on(b));
-    };
-
    // ORCA: Interior sampling
-    // The passes below infer the support under a span from its endpoints alone, so a part that is supported
-    // differently from both ends is invisible to them. The outer perimeter of an overhang whose ends are supported by
-    // reads as supported along its whole length. Probe the interior, keep the samples the endpoint interpolation fails to predict, 
-    // and bisect either side of each one, so a span that is only partly unsupported gets points where its support actually changes 
-    // instead of one reading being spread across all of it.
-    // Skipped where there is nothing to find: min_distance <= 0 when no overhang can slow this path down, and
-    // fan_overlap_threshold < 0 when no overhang switches the fan on. It also needs distance_to_speed to tell which of
-    // the points it could add would change the G-code.
-    if (PREV_LAYER_BOUNDARY_OFFSET && ADD_INTERSECTIONS && distance_to_speed && (min_distance > 0 || fan_overlap_threshold >= 0.f)) {
+    // The passes below infer the support under a span from its endpoints alone, so an interior that is supported
+    // differently from both ends is invisible to them: the outer perimeter of an overhang whose ends are caged by
+    // full height walls reads as supported along its whole length. Probe the interior, keep the samples the
+    // endpoint interpolation fails to predict, and bisect either side of each one, so a span that is only partly
+    // unsupported gets points where its support actually changes instead of one reading spread across all of it.
+    if (PREV_LAYER_BOUNDARY_OFFSET && ADD_INTERSECTIONS && min_distance > 0 && distance_to_speed) {
        // Probe at least this densely before treating matching samples as evidence that a span is uniform. The
        // segmentation pass below only splits lines of 2mm or more, and every pass here drops points closer
-        // together than min_spacing, so finer discovery would not produce a more precise transition.
+        // together than min_spacing, so finer discovery would not produce a more precise speed transition.
        const double max_probe_spacing = std::max(2., 4. * min_spacing);
        // A backstop for that length test, which on a non-finite length would never be met.
        constexpr int max_bisection_depth = 10;
+        // Whether two readings are interchangeable. A segment is printed at the lower of the speeds its ends
+        // read, so a sample that agrees on speed with what is already known cannot change the G-code, whatever
+        // its distance says. The distances themselves are far too coarse a stand-in for this: the speed sections
+        // interpolate, so readings a small fraction of min_distance apart can still be tens of mm/s apart.
+        // The tolerance matches the one GCode.cpp applies when it decides a path has a variable speed at all.
+        auto same_speed = [&distance_to_speed](float a, float b) {
+            return std::abs(distance_to_speed(a) - distance_to_speed(b)) <= 1.f;
+        };
+        // Whether the first reading is printed slower than the second, once they are known to differ.
+        auto prints_slower = [&distance_to_speed](float a, float b) { return distance_to_speed(a) < distance_to_speed(b); };

        // Part of a segment still to bisect: its positions along the segment and bisections left.
        struct Subspan { double t0, t1; int depth; };
@@ -201,8 +185,8 @@ std::vector<ExtendedPoint<L::Dim>> estimate_points_properties(const POINTS&
            if (!interior.empty()) {
                std::sort(interior.begin(), interior.end(),
                          [](const std::pair<double, float>& l, const std::pair<double, float>& r) { return l.first < r.first; });
-                // Coarse probing keeps every sample it took until this pass can see which ones bracket a speed or
-                // fan transition. Matching samples cannot be discarded during discovery: one may be the last
+                // Coarse probing keeps every sample it took until this pass can see which ones bracket a speed
+                // transition. Matching samples cannot be discarded during discovery: one may be the last
                // supported point before a narrow unsupported pocket found by a later probe.
                size_t kept = 0;
                for (size_t i = 0; i < interior.size(); ++i) {
@@ -211,15 +195,15 @@ std::vector<ExtendedPoint<L::Dim>> estimate_points_properties(const POINTS&
                    const bool  at_end    = i + 1 == interior.size();      // And nothing follows the last sample but the segment's end
                    const float before    = at_start ? curr.distance : interior[kept - 1].second;
                    const float after     = at_end ? next.distance : interior[i + 1].second;
-                    // A sample is worth a point in the path only where it prints differently, in speed or fan state,
-                    // from the points either side of it. Differing from one of the segment's own ends is not enough on
-                    // its own where the sample is not the slower or cooled of the two: the segmentation pass below
-                    // already confines the slowdown and cooling at an end, at a distance taken from how far out that
-                    // end is rather than from wherever bisection happened to stop, and a point here would leave the
-                    // span beside the end too short for that pass to run at all. Support an end cannot account for,
-                    // where the interior is the slower or cooled of the two, is exactly what this pass is here to find.
-                    const bool worth_before = !same_speed_and_fan(sample, before) && (!at_start || slower_or_cooled(sample, before));
-                    const bool worth_after  = !same_speed_and_fan(sample, after) && (!at_end || slower_or_cooled(sample, after));
+                    // A sample is worth a point in the path only where it prints at a different speed from the
+                    // readings either side of it. Differing from one of the segment's own ends is not enough on
+                    // its own where the sample is the faster of the two: the segmentation pass below already
+                    // ends the slowdown an end reads, at a distance taken from how far out that end is rather
+                    // than from wherever bisection happened to stop, and a point here would leave the span
+                    // beside the end too short for that pass to run at all. Support an end cannot account for,
+                    // where the interior is the slower reading, is exactly what this pass is here to find.
+                    const bool worth_before = !same_speed(sample, before) && (!at_start || prints_slower(sample, before));
+                    const bool worth_after  = !same_speed(sample, after) && (!at_end || prints_slower(sample, after));
                    if (worth_before || worth_after)
                        interior[kept++] = interior[i];
                }
@@ -255,59 +239,51 @@ std::vector<ExtendedPoint<L::Dim>> estimate_points_properties(const POINTS&
                (next.distance > -boundary_offset && next.distance < boundary_offset + 2.0f)) {
                double line_len = (next.position - curr.position).norm();
                
-                // ORCA: A line prints as slow as its slower end and is cooled if either end is, so an overhang at one
-                // end would otherwise slow down or cool the whole line. Split the line so that only the part beside
-                // that end prints that way, if the line is reasonably long (2mm or more) and at least one end prints
-                // slower or cooled compared with a supported point (overhang distance 0). Deciding on how the end
-                // prints, rather than on its overhang distance against min_distance, also catches an end whose overhang
-                // distance is exactly where the slowdown begins, such as an outline crossing at half a line width.
-                // Without distance_to_speed, split every line over 4mm.
-                const bool split_line = distance_to_speed ?
-                    line_len >= 2.f && (slower_or_cooled(curr.distance, 0.f) || slower_or_cooled(next.distance, 0.f)) :
-                    line_len > 4.0f;
-                if (split_line) {
-                    // Each end's piece is that end's overhang distance plus 1.5 line widths (3 * boundary_offset) long:
-                    // a0 ends the piece beside curr, a1 starts the piece beside next.
+                // ORCA: Segment path to smaller lines by adding additional points only if the path has an overhang that
+                // will trigger a slowdown and the path is also reasonably large, i.e. 2mm in length or more
+                // If there is no overhang in the start/end point, dont segment it.
+                // Ignore this check if the control of segmentation for overhangs is disabled (min_distance=-1)
+                if ((min_distance > 0 && ((std::abs(curr.distance) > min_distance) || (std::abs(next.distance) > min_distance)) && line_len >= 2.f) ||
+                    (min_distance <= 0 && line_len > 4.0f)) {
                    double a0 = std::clamp((curr.distance + 3 * boundary_offset) / line_len, 0.0, 1.0);
                    double a1 = std::clamp(1.0f - (next.distance + 3 * boundary_offset) / line_len, 0.0, 1.0);
                    double t0 = std::min(a0, a1);
                    double t1 = std::max(a0, a1);

-                    // Up to two cut points, in order along the line. Each takes its own overhang distance, so every
-                    // piece prints by the overhang distances at its own two ends. t0 >= 1 or t1 <= 0 falls on the
-                    // line's own end, so there is no cut. A cut closer than min_spacing to either end of the line is
-                    // not meaningful and is filtered out (#6714).
-                    ExtendedPoint<L::Dim> cut[2]{};
-                    bool                  keep[2] = {false, false};
-                    for (int k = 0; k < 2; ++k) {
-                        const double t = k == 0 ? t0 : t1;
-                        if (k == 0 ? t >= 1.0 : t <= 0.0)
-                            continue;
-                        const Vec p                  = curr.position + t * (next.position - curr.position);
-                        auto [p_dist, p_near_l, p_x] = unscaled_prev_layer.template distance_from_lines_extra<SIGNED_DISTANCE>(
-                            p.template cast<AABBScalar>());
-                        cut[k].position = p;
-                        cut[k].distance = float(p_dist + boundary_offset);
-                        keep[k] = (p - curr.position).norm() > min_spacing && (next.position - p).norm() > min_spacing;
+                    if (t0 < 1.0) {
+                        Vec p0                          = curr.position + t0 * (next.position - curr.position);
+                        auto [p0_dist, p0_near_l, p0_x] = unscaled_prev_layer.template distance_from_lines_extra<SIGNED_DISTANCE>(
+                            p0.template cast<AABBScalar>());
+                        ExtendedPoint<L::Dim> new_p{};
+                        new_p.position = p0;
+                        new_p.distance = float(p0_dist + boundary_offset);
+                        // ORCA: only create a new point in the path if the new point overhang distance will be used to generate a speed change
+                        // or if this option is disabled (min_distance<=0)
+                        if( (std::abs(p0_dist) > min_distance) || (min_distance<=0)){
+                            // ORCA: also filter out points that are introduced to the start of the path when their distance from the start point is
+                            // not meaningful
+                            if ((p0 - curr.position).norm() > min_spacing && (next.position - p0).norm() > min_spacing) {
+                                new_points.push_back(new_p);
+                            }
+                        }
+                    }
+                    if (t1 > 0.0) {
+                        Vec p1                          = curr.position + t1 * (next.position - curr.position);
+                        auto [p1_dist, p1_near_l, p1_x] = unscaled_prev_layer.template distance_from_lines_extra<SIGNED_DISTANCE>(
+                            p1.template cast<AABBScalar>());
+                        ExtendedPoint<L::Dim> new_p{};
+                        new_p.position = p1;
+                        new_p.distance = float(p1_dist + boundary_offset);
+                        // ORCA: only create a new point in the path if the new point overhang distance will be used to generate a speed change
+                        // or if this option is disabled (min_distance<=0)
+                        if( (std::abs(p1_dist) > min_distance) || (min_distance<=0)){
+                            // ORCA: filter out points that are introduced to the end of the path when their distance from the end point is
+                            // not meaningful
+                            if ((p1 - curr.position).norm() > min_spacing && (next.position - p1).norm() > min_spacing) {
+                                new_points.push_back(new_p);
+                            }
                        }
-                    if (distance_to_speed) {
-                        // Only keep a cut that changes the G-code: one that prints differently from at least one of the
-                        // points either side of it, which are the line's ends or the other cut where that is kept. A cut
-                        // that prints like both would only split a move into two identical ones.
-                        if (keep[0])
-                            keep[0] = !same_speed_and_fan(cut[0].distance, curr.distance) ||
-                                      !same_speed_and_fan(cut[0].distance, keep[1] ? cut[1].distance : next.distance);
-                        if (keep[1])
-                            keep[1] = !same_speed_and_fan(cut[1].distance, keep[0] ? cut[0].distance : curr.distance) ||
-                                      !same_speed_and_fan(cut[1].distance, next.distance);
-                        // Two cuts closer together than min_spacing would leave a micro segment between them, so only the
-                        // first is kept.
-                        if (keep[0] && keep[1] && (cut[1].position - cut[0].position).norm() <= min_spacing)
-                            keep[1] = false;
                    }
-                    for (int k = 0; k < 2; ++k)
-                        if (keep[k])
-                            new_points.push_back(cut[k]);
                }
            }
            new_points.push_back(next);
@@ -447,10 +423,7 @@ public:
                                                           const ConfigOptionFloatsOrPercents &speeds,
                                                           float                               ext_perimeter_speed,
                                                           float                               original_speed,
-                                                           bool								   slowdown_for_curled_edges,
-                                                           // Overlap at or below which the overhang fan switches on; negative when the fan
-                                                           // does not depend on overlap.
-                                                           float                               fan_overlap_threshold = -1.0f)
+                                                           bool								   slowdown_for_curled_edges)
    {
        size_t                               speed_sections_count = std::min(overlaps.values.size(), speeds.values.size());
        std::vector<std::pair<float, float>> speed_sections;
@@ -490,8 +463,7 @@ public:
            }
        }

-        // If no overhang distance slows this path down, -1 turns interior sampling off unless the overhang fan can switch.
-        // Lines are only split where an end prints slower or cooled, so here only a fan switch splits them.
+        // If a meaningful (i.e. needing slowdown) overhang distance was not found, then we shouldn't split the lines
        if (!found)
            smallest_distance_with_lower_speed=-1.f;

@@ -515,17 +487,9 @@ public:
            return round(final_speed);
        };

-        // ORCA: The speed sections are built from ext_perimeter_speed, which can be above the speed this path prints at
-        // (original_speed, e.g. held down by resonance avoidance). Every segment is capped at original_speed below, so
-        // overhang distances whose speeds differ only above it print the same and must not count as a speed change when
-        // the path is split.
-        auto effective_speed = [&calculate_speed, original_speed](float distance) {
-            return std::min(calculate_speed(distance), original_speed);
-        };
-
        std::vector<ExtendedPoint<3>> extended_points =
            estimate_points_properties<true, true, true, true>(path.polyline.points, prev_layer_boundaries[current_object], path.width, -1,
-                                                               smallest_distance_with_lower_speed, effective_speed, fan_overlap_threshold);
+                                                               smallest_distance_with_lower_speed, calculate_speed);
        const auto width_inv = 1.0f / path.width;
        std::vector<ProcessedPoint> processed_points;
        processed_points.reserve(extended_points.size());
@@ -2717,8 +2717,7 @@ void Print::process(long long *time_cost_with_cache, bool use_cache)

    {
        LifecycleEventContext ctx;
-        ctx.id = std::to_string(m_model.id().id);
-        ctx.name = get_model_name();
+        ctx.name = std::to_string(m_model.id().id);
        ctx.code = LifecycleEvtCode::Ok;
        ctx.cancellation_check = [this]() { return canceled(); };
        fire_lifecycle_event(LifecycleEvent::SliceStarted, ctx);
@@ -3345,8 +3344,7 @@ void Print::process(long long *time_cost_with_cache, bool use_cache)

    {
        LifecycleEventContext ctx;
-        ctx.id = std::to_string(m_model.id().id);
-        ctx.name = get_model_name();
+        ctx.name = std::to_string(m_model.id().id);
        ctx.code = LifecycleEvtCode::Ok;
        ctx.cancellation_check = [this]() { return canceled(); };
        fire_lifecycle_event(LifecycleEvent::SliceGeometryFinished, ctx);
@@ -4952,8 +4950,7 @@ void Print::export_gcode_from_previous_file(const std::string& file, GCodeProces
 {
    {
        LifecycleEventContext ctx;
-        ctx.id = std::to_string(m_model.id().id);
-        ctx.name = get_model_name();
+        ctx.name = std::to_string(m_model.id().id);
        ctx.code = LifecycleEvtCode::Ok;
        ctx.msg  = file;
        ctx.cancellation_check = [this]() { return canceled(); };
@@ -4983,8 +4980,7 @@ void Print::export_gcode_from_previous_file(const std::string& file, GCodeProces
        BOOST_LOG_TRIVIAL(error) << __FUNCTION__ <<  boost::format(": found errors when process gcode file %1%") %file.c_str();
        {
            LifecycleEventContext ctx;
-            ctx.id = std::to_string(m_model.id().id);
-            ctx.name = get_model_name();
+            ctx.name = std::to_string(m_model.id().id);
            ctx.code = LifecycleEvtCode::Error;
            ctx.msg  = file + "\n" + ex.what();
            ctx.cancellation_check = [this]() { return canceled(); };
@@ -4998,8 +4994,7 @@ void Print::export_gcode_from_previous_file(const std::string& file, GCodeProces

    {
        LifecycleEventContext ctx;
-        ctx.id = std::to_string(m_model.id().id);
-        ctx.name = get_model_name();
+        ctx.name = std::to_string(m_model.id().id);
        ctx.code = LifecycleEvtCode::Ok;
        ctx.msg  = file;
        ctx.cancellation_check = [this]() { return canceled(); };
--- a/Show More
+++ b/Show More