Validate Zip Entry Sizes Before Parsing 3MF XML

The 3MF importers read XML entries into a single expat buffer whose size is
an int, while the archive extraction used the entry's 64-bit declared size.
The two could disagree for entries declaring more than INT_MAX bytes.

Reject such entries before allocating, and use one size for the buffer, the
extraction and the parse. This applies to the BBS importer, the PrusaSlicer
importer and the PrusaSlicer fingerprint probe. The load now fails with an
error instead.

src/libslic3r/Fill/Fill.cpp

@@ -1692,9 +1692,9 @@ void Layer::make_ironing()
 				ironing_params.just_infill 	= false;
 				// ORCA: Get filament-specific overrides if configured, otherwise use process values
 				size_t extruder_idx = ironing_params.extruder - 1;
-				ironing_params.line_spacing = std::max(IRONING_SPACING_MIN, !config.filament_ironing_spacing.is_nil(extruder_idx)
+				ironing_params.line_spacing = (!config.filament_ironing_spacing.is_nil(extruder_idx)
 					? config.filament_ironing_spacing.get_at(extruder_idx)
-					: config.ironing_spacing.value);
+					: config.ironing_spacing);
                 ironing_params.inset = (!config.filament_ironing_inset.is_nil(extruder_idx)
 					? config.filament_ironing_inset.get_at(extruder_idx)
 					: config.ironing_inset);

src/libslic3r/Fill/FillConcentric.cpp

@@ -22,9 +22,6 @@ void FillConcentric::_fill_surface_single(
     
     coord_t min_spacing = scale_(this->spacing) * params.multiline;
     coord_t distance = coord_t(min_spacing / params.density);
-    // A non-positive step never shrinks the region, so the inset loop below would not end.
-    if (min_spacing <= 0 || distance <= 0)
-        return;
     
     if (params.density > 0.9999f && !params.dont_adjust) {
         distance = this->_adjust_solid_spacing(bounding_box.size()(0), distance);
@@ -111,8 +108,6 @@ void FillConcentric::_fill_surface_single(const FillParams& params,
     // no rotation is supported for this infill pattern
     Point   bbox_size = expolygon.contour.bounding_box().size();
     coord_t min_spacing = scaled<coord_t>(this->spacing);
-    if (min_spacing <= 0)
-        return;
 
     if (params.density > 0.9999f && !params.dont_adjust) {
         coord_t                loops_count = std::max(bbox_size.x(), bbox_size.y()) / min_spacing + 1;

src/libslic3r/Format/3mf.cpp

@@ -307,14 +307,17 @@ bool PrusaFileParser::check_3mf_from_prusa(const std::string filename)
 
             mz_zip_archive_file_stat stat;
             if (!mz_zip_reader_file_stat(&archive, model_file_index, &stat)) goto EXIT;
+            // expat sizes its buffer with an int, so a larger entry cannot be parsed in one piece.
+            if (stat.m_uncomp_size > static_cast<mz_uint64>(std::numeric_limits<int>::max())) goto EXIT;
 
-            void *parser_buffer = XML_GetBuffer(m_parser, (int) stat.m_uncomp_size);
+            const int xml_size = static_cast<int>(stat.m_uncomp_size);
+            void *parser_buffer = XML_GetBuffer(m_parser, xml_size);
             if (parser_buffer == nullptr) goto EXIT;
 
-            mz_bool res = mz_zip_reader_extract_file_to_mem(&archive, stat.m_filename, parser_buffer, (size_t) stat.m_uncomp_size, 0);
+            mz_bool res = mz_zip_reader_extract_file_to_mem(&archive, stat.m_filename, parser_buffer, static_cast<size_t>(xml_size), 0);
             if (res == 0) goto EXIT;
 
-            XML_ParseBuffer(m_parser, (int) stat.m_uncomp_size, 1);
+            XML_ParseBuffer(m_parser, xml_size, 1);
         }
     }
 
@@ -1346,19 +1349,26 @@ ModelVolumeType type_from_string(const std::string &s)
         XML_SetUserData(m_xml_parser, (void*)this);
         XML_SetElementHandler(m_xml_parser, _3MF_Importer::_handle_start_config_xml_element, _3MF_Importer::_handle_end_config_xml_element);
 
-        void* parser_buffer = XML_GetBuffer(m_xml_parser, (int)stat.m_uncomp_size);
+        // expat sizes its buffer with an int, so a larger entry cannot be parsed in one piece.
+        if (stat.m_uncomp_size > static_cast<mz_uint64>(std::numeric_limits<int>::max())) {
+            add_error("Found invalid size");
+            return false;
+        }
+        const int xml_size = static_cast<int>(stat.m_uncomp_size);
+
+        void* parser_buffer = XML_GetBuffer(m_xml_parser, xml_size);
         if (parser_buffer == nullptr) {
             add_error("Unable to create buffer");
             return false;
         }
 
-        mz_bool res = mz_zip_reader_extract_file_to_mem(&archive, stat.m_filename, parser_buffer, (size_t)stat.m_uncomp_size, 0);
+        mz_bool res = mz_zip_reader_extract_file_to_mem(&archive, stat.m_filename, parser_buffer, static_cast<size_t>(xml_size), 0);
         if (res == 0) {
             add_error("Error while reading config data to buffer");
             return false;
         }
 
-        if (!XML_ParseBuffer(m_xml_parser, (int)stat.m_uncomp_size, 1)) {
+        if (!XML_ParseBuffer(m_xml_parser, xml_size, 1)) {
             char error_buf[1024];
             ::sprintf(error_buf, "Error (%s) while parsing xml file at line %d", XML_ErrorString(XML_GetErrorCode(m_xml_parser)), (int)XML_GetCurrentLineNumber(m_xml_parser));
             add_error(error_buf);

src/libslic3r/Format/bbs_3mf.cpp

@@ -2508,19 +2508,26 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result)
         XML_SetEntityDeclHandler(m_xml_parser, nullptr);
         XML_SetExternalEntityRefHandler(m_xml_parser, nullptr);
 
-        void* parser_buffer = XML_GetBuffer(m_xml_parser, (int)stat.m_uncomp_size);
+        // expat sizes its buffer with an int, so a larger entry cannot be parsed in one piece.
+        if (stat.m_uncomp_size > static_cast<mz_uint64>(std::numeric_limits<int>::max())) {
+            add_error("Found invalid size");
+            return false;
+        }
+        const int xml_size = static_cast<int>(stat.m_uncomp_size);
+
+        void* parser_buffer = XML_GetBuffer(m_xml_parser, xml_size);
         if (parser_buffer == nullptr) {
             add_error("Unable to create buffer");
             return false;
         }
 
-        mz_bool res = mz_zip_reader_extract_file_to_mem(&archive, stat.m_filename, parser_buffer, (size_t)stat.m_uncomp_size, 0);
+        mz_bool res = mz_zip_reader_extract_file_to_mem(&archive, stat.m_filename, parser_buffer, static_cast<size_t>(xml_size), 0);
         if (res == 0) {
             add_error("Error while reading config data to buffer");
             return false;
         }
 
-        if (!XML_ParseBuffer(m_xml_parser, (int)stat.m_uncomp_size, 1)) {
+        if (!XML_ParseBuffer(m_xml_parser, xml_size, 1)) {
             char error_buf[1024];
             ::snprintf(error_buf, 1024, "Error (%s) while parsing xml file at line %d", XML_ErrorString(XML_GetErrorCode(m_xml_parser)), (int)XML_GetCurrentLineNumber(m_xml_parser));
             add_error(error_buf);

src/libslic3r/GCode.cpp

@@ -2504,8 +2504,7 @@ void GCode::do_export(Print* print, const char* path, GCodeProcessorResult* resu
 
     {
         LifecycleEventContext ctx;
-        ctx.id = std::to_string(print->model().id().id);
-        ctx.name = print->get_model_name();
+        ctx.name = std::to_string(print->model().id().id);
         ctx.code = LifecycleEvtCode::Ok;
         ctx.msg  = path;
         ctx.cancellation_check = [print]() { return print->canceled(); };
@@ -2557,8 +2556,7 @@ void GCode::do_export(Print* print, const char* path, GCodeProcessorResult* resu
         }
         {
             LifecycleEventContext ctx;
-            ctx.id = std::to_string(print->model().id().id);
-            ctx.name = print->get_model_name();
+            ctx.name = std::to_string(print->model().id().id);
             ctx.code = LifecycleEvtCode::Error;
             ctx.msg  = std::string(path) + "\n" + err_msg;
             ctx.cancellation_check = [print]() { return print->canceled(); };
@@ -2582,8 +2580,7 @@ void GCode::do_export(Print* print, const char* path, GCodeProcessorResult* resu
         boost::nowide::remove(path_tmp.c_str());
         {
             LifecycleEventContext ctx;
-            ctx.id = std::to_string(print->model().id().id);
-            ctx.name = print->get_model_name();
+            ctx.name = std::to_string(print->model().id().id);
             ctx.code = LifecycleEvtCode::Error;
             ctx.msg  = std::string(path) + "\n" + ex.what();
             ctx.cancellation_check = [print]() { return print->canceled(); };
@@ -2696,8 +2693,7 @@ void GCode::do_export(Print* print, const char* path, GCodeProcessorResult* resu
     if (ret) {
         {
             LifecycleEventContext ctx;
-            ctx.id = std::to_string(print->model().id().id);
-            ctx.name = print->get_model_name();
+            ctx.name = std::to_string(print->model().id().id);
             ctx.code = LifecycleEvtCode::Error;
             ctx.msg  = std::string(path) + "\nFailed to rename the output G-code file: " + ret.message();
             ctx.cancellation_check = [print]() { return print->canceled(); };
@@ -2716,8 +2712,7 @@ void GCode::do_export(Print* print, const char* path, GCodeProcessorResult* resu
 
     {
         LifecycleEventContext ctx;
-        ctx.id = std::to_string(print->model().id().id);
-        ctx.name = print->get_model_name();
+        ctx.name = std::to_string(print->model().id().id);
         ctx.code = LifecycleEvtCode::Ok;
         ctx.msg  = path;
         ctx.cancellation_check = [print]() { return print->canceled(); };

src/libslic3r/Print.cpp

@@ -2717,8 +2717,7 @@ void Print::process(long long *time_cost_with_cache, bool use_cache)
 
     {
         LifecycleEventContext ctx;
-        ctx.id = std::to_string(m_model.id().id);
-        ctx.name = get_model_name();
+        ctx.name = std::to_string(m_model.id().id);
         ctx.code = LifecycleEvtCode::Ok;
         ctx.cancellation_check = [this]() { return canceled(); };
         fire_lifecycle_event(LifecycleEvent::SliceStarted, ctx);
@@ -3345,8 +3344,7 @@ void Print::process(long long *time_cost_with_cache, bool use_cache)
 
     {
         LifecycleEventContext ctx;
-        ctx.id = std::to_string(m_model.id().id);
-        ctx.name = get_model_name();
+        ctx.name = std::to_string(m_model.id().id);
         ctx.code = LifecycleEvtCode::Ok;
         ctx.cancellation_check = [this]() { return canceled(); };
         fire_lifecycle_event(LifecycleEvent::SliceGeometryFinished, ctx);
@@ -4952,8 +4950,7 @@ void Print::export_gcode_from_previous_file(const std::string& file, GCodeProces
 {
     {
         LifecycleEventContext ctx;
-        ctx.id = std::to_string(m_model.id().id);
-        ctx.name = get_model_name();
+        ctx.name = std::to_string(m_model.id().id);
         ctx.code = LifecycleEvtCode::Ok;
         ctx.msg  = file;
         ctx.cancellation_check = [this]() { return canceled(); };
@@ -4983,8 +4980,7 @@ void Print::export_gcode_from_previous_file(const std::string& file, GCodeProces
         BOOST_LOG_TRIVIAL(error) << __FUNCTION__ <<  boost::format(": found errors when process gcode file %1%") %file.c_str();
         {
             LifecycleEventContext ctx;
-            ctx.id = std::to_string(m_model.id().id);
-            ctx.name = get_model_name();
+            ctx.name = std::to_string(m_model.id().id);
             ctx.code = LifecycleEvtCode::Error;
             ctx.msg  = file + "\n" + ex.what();
             ctx.cancellation_check = [this]() { return canceled(); };
@@ -4998,8 +4994,7 @@ void Print::export_gcode_from_previous_file(const std::string& file, GCodeProces
 
     {
         LifecycleEventContext ctx;
-        ctx.id = std::to_string(m_model.id().id);
-        ctx.name = get_model_name();
+        ctx.name = std::to_string(m_model.id().id);
         ctx.code = LifecycleEvtCode::Ok;
         ctx.msg  = file;
         ctx.cancellation_check = [this]() { return canceled(); };

src/libslic3r/PrintConfig.hpp

@@ -178,10 +178,6 @@ enum class IroningType {
     Count,
 };
 
-// Smallest usable ironing line spacing. Anything tighter yields an unprintable number of lines,
-// and zero stops the fillers from making progress.
-constexpr double IRONING_SPACING_MIN = 0.05;
-
 //BBS
 enum class WallInfillOrder {
     InnerOuterInfill,

src/libslic3r/Support/SupportParameters.hpp

@@ -64,7 +64,7 @@ struct SupportParameters {
 
         this->ironing = object_config.support_ironing;
         this->ironing_flow = support_material_interface_flow.with_height(support_material_interface_flow.height() * 0.01 * object_config.support_ironing_flow.value);
-        this->ironing_spacing = std::max(IRONING_SPACING_MIN, object_config.support_ironing_spacing.value);
+        this->ironing_spacing = object_config.support_ironing_spacing;
         this->ironing_pattern = object_config.support_ironing_pattern;
 
         // Calculate a minimum support layer height as a minimum over all extruders, but not smaller than 10um.

src/slic3r/GUI/ConfigManipulation.cpp

@@ -210,30 +210,6 @@ void ConfigManipulation::check_filament_max_volumetric_speed(DynamicPrintConfig
 
 }
 
-void ConfigManipulation::check_filament_ironing_spacing(DynamicPrintConfig *config)
-{
-    const auto *opt = config->option<ConfigOptionFloatsNullable>("filament_ironing_spacing");
-    if (opt == nullptr)
-        return;
-    std::vector<double> values = opt->values;
-    bool                reset  = false;
-    for (size_t i = 0; i < values.size(); ++i)
-        if (!opt->is_nil(i) && values[i] < IRONING_SPACING_MIN) {
-            values[i] = 0.1;
-            reset     = true;
-        }
-    if (!reset)
-        return;
-    const wxString     msg_text = _(L("Ironing spacing too small\nIt has been reset to 0.1"));
-    MessageDialog      dialog(nullptr, msg_text, "", wxICON_WARNING | wxOK);
-    DynamicPrintConfig new_conf = *config;
-    is_msg_dlg_already_exist    = true;
-    dialog.ShowModal();
-    new_conf.set_key_value("filament_ironing_spacing", new ConfigOptionFloatsNullable(values));
-    apply(config, &new_conf);
-    is_msg_dlg_already_exist = false;
-}
-
 void ConfigManipulation::check_chamber_temperature(DynamicPrintConfig* config)
 {
    bool support_chamber_temp_control=GUI::wxGetApp().preset_bundle->printers.get_selected_preset().config.opt_bool("support_chamber_temp_control");
@@ -356,7 +332,7 @@ void ConfigManipulation::update_print_fff_config(DynamicPrintConfig* config, con
     }
 
     //BBS: ironing_spacing shouldn't be too small or equal to zero
-    if (config->opt_float("ironing_spacing") < IRONING_SPACING_MIN)
+    if (config->opt_float("ironing_spacing") < 0.05)
     {
         const wxString msg_text = _(L("Ironing spacing too small\nIt has been reset to 0.1"));
         MessageDialog dialog(nullptr, msg_text, "", wxICON_WARNING | wxOK);
@@ -367,7 +343,7 @@ void ConfigManipulation::update_print_fff_config(DynamicPrintConfig* config, con
         apply(config, &new_conf);
         is_msg_dlg_already_exist = false;
     }
-    if (config->opt_float("support_ironing_spacing") < IRONING_SPACING_MIN)
+    if (config->opt_float("support_ironing_spacing") < 0.05)
     {
         const wxString msg_text = _(L("Ironing spacing too small\nIt has been reset to 0.1"));
         MessageDialog dialog(nullptr, msg_text, "", wxICON_WARNING | wxOK);

src/slic3r/GUI/ConfigManipulation.hpp

@@ -84,7 +84,6 @@ public:
     void    check_nozzle_temperature_initial_layer_range(DynamicPrintConfig* config);
     void    check_adaptive_pressure_advance_model(DynamicPrintConfig* config);
     void    check_filament_max_volumetric_speed(DynamicPrintConfig *config);
-    void    check_filament_ironing_spacing(DynamicPrintConfig *config);
     void    check_chamber_temperature(DynamicPrintConfig* config);
     void    check_chamber_minimal_temperature(DynamicPrintConfig* config);
     bool    check_layer_height(DynamicPrintConfig* config);

src/slic3r/GUI/Plater.cpp

@@ -12800,6 +12800,8 @@ void Plater::priv::on_process_completed(SlicingProcessCompletedEvent &evt)
     notification_manager->set_slicing_progress_export_possible();
 
     // Reset the "export G-code path" name, so that the automatic background processing will be enabled again.
+    const std::string lifecycle_job_name = this->background_process.fff_print() ?
+        this->background_process.fff_print()->output_filename() : std::string();
     this->background_process.reset_export();
     // This bool stops showing export finished notification even when process_completed_with_error is false
     bool has_error = false;
@@ -12846,18 +12848,8 @@ void Plater::priv::on_process_completed(SlicingProcessCompletedEvent &evt)
 
     {
         Slic3r::LifecycleEventContext ctx;
-        if (const PrintBase* print = this->background_process.current_print()) {
-            const Model& model = print->model();
-            ctx.id             = std::to_string(model.id().id);
-            if (model.model_info)
-                ctx.name = model.model_info->model_name;
-        } else {
-            // Realistically Printbase* print will never be null because select_technology already asserts an active print
-            // and the worker thread asserts it before processing.
-            BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << ": slicing completed without an active print; lifecycle event has no model ID";
-        }
-        ctx.code = evt.cancelled() ? Slic3r::LifecycleEvtCode::Warn :
-                                     (has_error ? Slic3r::LifecycleEvtCode::Error : Slic3r::LifecycleEvtCode::Ok);
+        ctx.name = lifecycle_job_name;
+        ctx.code = evt.cancelled() ? Slic3r::LifecycleEvtCode::Warn : (has_error ? Slic3r::LifecycleEvtCode::Error : Slic3r::LifecycleEvtCode::Ok);
         ctx.msg  = evt.cancelled() ? "cancelled" : (has_error ? lifecycle_error_msg : std::string());
         Slic3r::fire_lifecycle_event(Slic3r::LifecycleEvent::SlicingJobComplete, ctx);
     }

src/slic3r/GUI/Tab.cpp

@@ -4905,7 +4905,6 @@ void TabFilament::update()
         return; // ys_FIXME
 
     m_config_manipulation.check_filament_max_volumetric_speed(m_config);
-    m_config_manipulation.check_filament_ironing_spacing(m_config);
 
     m_update_cnt++;
 

src/slic3r/Utils/PrintHost.cpp

@@ -6,7 +6,6 @@
 #include <boost/optional.hpp>
 #include <boost/log/trivial.hpp>
 #include <boost/filesystem.hpp>
-#include <nlohmann/json.hpp>
 
 #include <wx/string.h>
 #include <wx/app.h>
@@ -116,67 +115,10 @@ std::string PrintHost::get_print_host_webui(DynamicPrintConfig* config)
     return webui_url;
 }
 
-namespace {
-
-// Moonraker (Klipper's API server) reports a raised exception as { "error": { "code", "message", "traceback" } }
-// under every host type that connects to it, often with the cause only in the traceback. Returns the reason to show,
-// or empty for any other body.
-std::string moonraker_error_reason(const std::string &body)
-{
-    const auto root = nlohmann::json::parse(body, nullptr, false);
-    const auto err  = root.find("error");
-    if (err == root.end())
-        return {};
-    const auto message   = err->find("message");
-    const auto traceback = err->find("traceback");
-    if (message == err->end() || traceback == err->end() || !message->is_string() || !traceback->is_string())
-        return {};
-
-    const auto &msg = message->get_ref<const std::string &>();
-    const auto &tb  = traceback->get_ref<const std::string &>();
-    if (msg.empty())
-        return {};
-    const auto end = tb.find_last_not_of(" \t\r\n");
-    if (end == std::string::npos)
-        return msg;
-
-    // Chained exceptions each start a new traceback; the one that failed the request is the last.
-    const auto header = tb.rfind("Traceback (most recent call last):", end);
-
-    // Tornado renders a raised HTTPError as "HTTP <code>: <reason>[ (<detail>)]", and the detail may span lines.
-    const auto code = err->find("code");
-    if (code != err->end() && code->is_number_integer()) {
-        const std::string marker = "HTTP " + std::to_string(code->get<int>()) + ": ";
-        const auto        pos    = tb.rfind(marker, end);
-        if (pos != std::string::npos && (header == std::string::npos || pos > header) && pos + marker.size() <= end) {
-            const std::string reason = tb.substr(pos + marker.size(), end + 1 - pos - marker.size());
-            // An HTTPError whose detail equals its reason, like HTTPError(401, "Unauthorized"), renders the phrase twice.
-            return reason == msg + " (" + msg + ")" ? msg : reason;
-        }
-    }
-
-    // Any other exception's type and message are everything from the first unindented line after its frames.
-    auto begin = (header == std::string::npos) ? std::string::npos : tb.find('\n', header);
-    while (begin != std::string::npos && begin < end) {
-        ++begin;
-        if (tb[begin] != ' ' && tb[begin] != '\r' && tb[begin] != '\n')
-            break;
-        begin = tb.find('\n', begin);
-    }
-    if (begin == std::string::npos || begin > end) {
-        const auto nl = tb.rfind('\n', end);
-        begin         = (nl == std::string::npos) ? 0 : nl + 1;
-    }
-    return msg + " (" + tb.substr(begin, end + 1 - begin) + ")";
-}
-
-} // namespace
-
 wxString PrintHost::format_error(const std::string &body, const std::string &error, unsigned status) const
 {
     if (status != 0) {
-        const std::string reason = moonraker_error_reason(body);
-        auto wxbody = wxString::FromUTF8(reason.empty() ? body : reason);
+        auto wxbody = wxString::FromUTF8(body.data());
         return wxString::Format("HTTP %u: %s", status, wxbody);
     } else {
         if (error.find("curl:Timeout was reached") != std::string::npos) {

tests/fff_print/test_fill.cpp

@@ -747,61 +747,6 @@ TEST_CASE("A region with ironing turned off is never ironed", "[Fill]")
     REQUIRE(Layer::choose_ironing_extruder(cfg, spiral_mode, /*is_topmost_layer=*/true) == -1);
 }
 
-// Ironing path count and total length in mm, over the whole object.
-static std::pair<size_t, double> ironing_extent(const Print &print)
-{
-    size_t paths  = 0;
-    double length = 0.;
-    for (const Layer *layer : print.objects().front()->layers())
-        for (const LayerRegion *region : layer->regions())
-            for (const ExtrusionEntity *entity : region->fills.flatten().entities)
-                if (ironing_role(entity->role())) {
-                    ++paths;
-                    length += unscale<double>(entity->length());
-                }
-    return {paths, length};
-}
-
-TEST_CASE("Ironing spacing below the minimum irons at the minimum spacing", "[Fill]")
-{
-    const std::string pattern      = GENERATE("rectilinear", "concentric");
-    const bool        via_filament = GENERATE(false, true);
-    const double      spacing      = GENERATE(0., 0.001);
-    CAPTURE(pattern, via_filament, spacing);
-
-    auto ironing_for = [&pattern, via_filament](double spacing) {
-        DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
-        config.set_deserialize_strict({{"ironing_type", "top"},
-                                       {"ironing_pattern", pattern},
-                                       {"layer_height", 0.2}});
-        // The filament override replaces the process spacing, which stays at a usable value.
-        if (via_filament)
-            config.set_deserialize_strict({{"ironing_spacing", 0.1}, {"filament_ironing_spacing", spacing}});
-        else
-            config.set_deserialize_strict({{"ironing_spacing", spacing}});
-        Print print;
-        Slic3r::Test::init_and_process_print({Slic3r::Test::cube(20)}, print, config);
-        return ironing_extent(print);
-    };
-
-    const std::pair<size_t, double> clamped = ironing_for(spacing);
-    const std::pair<size_t, double> minimum = ironing_for(IRONING_SPACING_MIN);
-    REQUIRE(minimum.first > 0);
-    CHECK(clamped.first == minimum.first);
-    CHECK_THAT(clamped.second, Catch::Matchers::WithinRel(minimum.second, 1e-9));
-}
-
-TEST_CASE("Concentric fill at zero spacing returns without paths", "[Fill]")
-{
-    std::unique_ptr<Fill> filler(Fill::new_from_type(ipConcentric));
-    filler->spacing      = 0.;
-    filler->bounding_box = BoundingBox(Point(0, 0), Point::new_scale(10, 10));
-    FillParams params;
-    params.density = 1.f;
-    Surface surface(stTop, ExPolygon({Point(0, 0), Point::new_scale(10, 0), Point::new_scale(10, 10), Point::new_scale(0, 10)}));
-    CHECK(filler->fill_surface(&surface, params).empty());
-}
-
 TEST_CASE("Solid infill direction offsets every layer when no template is set", "[Fill]")
 {
     auto angles_for = [](int direction) {

tests/fff_print/test_print.cpp

@@ -15,9 +15,6 @@
 #include "libslic3r/Layer.hpp"
 #include "libslic3r/Model.hpp"
 #include "libslic3r/GCodeReader.hpp"
-#include "libslic3r/GCode/GCodeProcessor.hpp"
-#include "libslic3r/Exception.hpp"
-#include "libslic3r/LifecycleEvents.hpp"
 
 #include "test_helpers.hpp"
 #include "test_utils.hpp"
@@ -25,10 +22,7 @@
 #include <algorithm>
 #include <fstream>
 #include <iterator>
-#include <memory>
 #include <string_view>
-#include <utility>
-#include <vector>
 
 using namespace Slic3r;
 using namespace Slic3r::Test;
@@ -230,88 +224,8 @@ std::string resolved_output_name(Model& model, const std::string& format, const
     return print.output_filename(filename_base);
 }
 
-struct ScopedLifecycleHook
-{
-    explicit ScopedLifecycleHook(LifecycleHookFn hook) { set_lifecycle_hook_fn(std::move(hook)); }
-    ~ScopedLifecycleHook() { set_lifecycle_hook_fn(nullptr); }
-};
-
 } // namespace
 
-TEST_CASE("Slicing lifecycle events identify the model", "[Print][LifecycleEvents]")
-{
-    struct ObservedEvent {
-        LifecycleEvent event;
-        std::string id;
-        std::string name;
-    };
-    std::vector<ObservedEvent> events;
-    ScopedLifecycleHook hook([&](LifecycleEvent event, const LifecycleEventContext& ctx) {
-        events.push_back({ event, ctx.id, ctx.name });
-    });
-
-    Print print;
-    Model model;
-    ModelInfo info;
-    info.model_name = "Lifecycle test model";
-    model.model_info = std::make_shared<ModelInfo>(std::move(info));
-    init_print({cube(20)}, print, model);
-
-    print.process();
-    ScopedTemporaryFile temp(".gcode");
-    print.export_gcode(temp.string(), nullptr, nullptr);
-    GCodeProcessorResult result;
-    print.export_gcode_from_previous_file(temp.string(), &result);
-
-    const std::string expected_id = std::to_string(print.model().id().id);
-    const std::vector<LifecycleEvent> expected_events = {
-        LifecycleEvent::SliceStarted,
-        LifecycleEvent::SliceGeometryFinished,
-        LifecycleEvent::GCodeExportStarted,
-        LifecycleEvent::GCodeExportFinished,
-        LifecycleEvent::GCodeExportStarted,
-        LifecycleEvent::GCodeExportFinished,
-    };
-    REQUIRE(events.size() == expected_events.size());
-    for (size_t i = 0; i < expected_events.size(); ++i) {
-        CHECK(events[i].event == expected_events[i]);
-        CHECK(events[i].id == expected_id);
-        CHECK(events[i].name == "Lifecycle test model");
-    }
-}
-
-TEST_CASE("Slicing lifecycle event name is empty without model metadata", "[Print][LifecycleEvents]")
-{
-    std::string event_id;
-    std::string event_name = "unset";
-    ScopedLifecycleHook hook([&](LifecycleEvent event, const LifecycleEventContext& ctx) {
-        if (event == LifecycleEvent::SliceStarted) {
-            event_id = ctx.id;
-            event_name = ctx.name;
-        }
-    });
-
-    Print print;
-    Model model;
-    init_print({cube(20)}, print, model);
-    print.process();
-
-    CHECK(event_id == std::to_string(print.model().id().id));
-    CHECK(event_name.empty());
-}
-
-TEST_CASE("Output filenames with numeric statistics fail before slicing finishes", "[Print][Regression]")
-{
-    DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
-    config.set_key_value("filename_format", new ConfigOptionString("{int(total_weight*10) / 10.0}"));
-
-    Print print;
-    Model model;
-    init_print({cube(20)}, print, model, config);
-
-    CHECK_THROWS_AS(print.output_filename(), PlaceholderParserError);
-}
-
 TEST_CASE("Print: {first_object_name} names the first printable object on the plate", "[Print]")
 {
     Model model;

tests/libslic3r/test_3mf.cpp

@@ -17,6 +17,7 @@
 #include <nlohmann/json.hpp>
 
 #include <boost/filesystem/operations.hpp>
+#include <boost/nowide/fstream.hpp>
 #include <boost/algorithm/string/predicate.hpp>
 #include <algorithm>
 
@@ -1461,3 +1462,79 @@ SCENARIO("bbs_3mf_is_published detects only genuinely published 3MFs", "[3mf]")
     }
 }
 
+// Writes a single-entry zip whose central directory carries a zip64 record declaring an
+// uncompressed size beyond what the 32-bit expat buffer API can take, while the deflated
+// payload inflates to only ~64 KiB. Built by hand because miniz never writes a size that
+// disagrees with the data.
+static void write_zip_with_oversized_entry(const std::string& path, const std::string& entry)
+{
+    const std::string xml = "<?xml version=\"1.0\"?><!--" + std::string(65536, 'A') + "--><a/>";
+    size_t comp_len = 0;
+    void*  comp     = tdefl_compress_mem_to_heap(xml.data(), xml.size(), &comp_len, TDEFL_DEFAULT_MAX_PROBES);
+    REQUIRE(comp != nullptr);
+    const std::string deflated(static_cast<const char*>(comp), comp_len);
+    mz_free(comp);
+    const uint32_t crc = static_cast<uint32_t>(mz_crc32(MZ_CRC32_INIT, reinterpret_cast<const unsigned char*>(xml.data()), xml.size()));
+    const uint64_t claimed_size = (uint64_t(1) << 32) + 16;
+
+    std::string out;
+    auto put = [&out](uint64_t v, int bytes) {
+        for (int i = 0; i < bytes; ++i)
+            out.push_back(static_cast<char>((v >> (8 * i)) & 0xFF));
+    };
+    // local file header, with the true sizes
+    put(0x04034b50, 4); put(45, 2); put(0, 2); put(8, 2); put(0, 2); put(0, 2);
+    put(crc, 4); put(deflated.size(), 4); put(xml.size(), 4); put(entry.size(), 2); put(0, 2);
+    out += entry + deflated;
+    // central directory header, sizes deferred to the zip64 extra field
+    const size_t cd_offset = out.size();
+    put(0x02014b50, 4); put(45, 2); put(45, 2); put(0, 2); put(8, 2); put(0, 2); put(0, 2);
+    put(crc, 4); put(0xFFFFFFFF, 4); put(0xFFFFFFFF, 4); put(entry.size(), 2); put(20, 2);
+    put(0, 2); put(0, 2); put(0, 2); put(0, 4); put(0, 4);
+    out += entry;
+    put(0x0001, 2); put(16, 2); put(claimed_size, 8); put(deflated.size(), 8);
+    const size_t cd_size = out.size() - cd_offset;
+    // end of central directory
+    put(0x06054b50, 4); put(0, 2); put(0, 2); put(1, 2); put(1, 2);
+    put(cd_size, 4); put(cd_offset, 4); put(0, 2);
+
+    boost::nowide::ofstream f(path, std::ios::binary);
+    REQUIRE(f.good());
+    f.write(out.data(), static_cast<std::streamsize>(out.size()));
+    REQUIRE(f.good());
+}
+
+TEST_CASE("3MF XML entries declaring more than an int can hold fail to load", "[3mf]") {
+    ScopedTemporaryFile temp(".3mf");
+    const std::string   path = temp.string();
+
+    SECTION("BBS importer") {
+        write_zip_with_oversized_entry(path, "_rels/.rels");
+        Model                     model;
+        DynamicPrintConfig        config;
+        ConfigSubstitutionContext ctxt{ForwardCompatibilitySubstitutionRule::Enable};
+        PlateDataPtrs             plates;
+        std::vector<Preset*>      project_presets;
+        bool                      is_bbl_3mf = false, is_orca_3mf = false;
+        Semver                    file_version;
+        bool                      loaded = true;
+        REQUIRE_NOTHROW(loaded = load_bbs_3mf(path.c_str(), &config, &ctxt, &model, &plates, &project_presets, &is_bbl_3mf,
+                                              &is_orca_3mf, &file_version, nullptr, LoadStrategy::LoadModel | LoadStrategy::LoadConfig));
+        CHECK_FALSE(loaded);
+        release_PlateData_list(plates);
+    }
+    SECTION("PrusaSlicer importer") {
+        write_zip_with_oversized_entry(path, "Metadata/Slic3r_PE_model.config");
+        Model                     model;
+        DynamicPrintConfig        config;
+        ConfigSubstitutionContext ctxt{ForwardCompatibilitySubstitutionRule::Disable};
+        bool                      loaded = true;
+        REQUIRE_NOTHROW(loaded = load_3mf(path.c_str(), config, ctxt, &model, false));
+        CHECK_FALSE(loaded);
+    }
+    SECTION("PrusaSlicer fingerprint probe") {
+        write_zip_with_oversized_entry(path, "3D/3dmodel.model");
+        PrusaFileParser parser;
+        CHECK_FALSE(parser.check_3mf_from_prusa(path));
+    }
+}

tests/slic3rutils/CMakeLists.txt

@@ -18,7 +18,6 @@ add_executable(${_TEST_NAME}_tests
     test_plugin_install.cpp
     test_plugin_lifecycle.cpp
     test_plugin_printer_agent.cpp
-    test_printhost.cpp
     test_slicing_pipeline_bindings.cpp
     test_slicing_pipeline_config.cpp
     test_plugin_sort.cpp

tests/slic3rutils/test_printhost.cpp

@@ -1,213 +0,0 @@
-#include <catch2/catch_all.hpp>
-
-#include <nlohmann/json.hpp>
-
-#include "slic3r/Utils/PrintHost.hpp"
-
-using namespace Slic3r;
-
-namespace {
-
-class TestPrintHost : public PrintHost
-{
-public:
-    using PrintHost::format_error;
-
-    const char* get_name() const override { return "Test"; }
-    bool test(wxString&) const override { return true; }
-    wxString get_test_ok_msg() const override { return {}; }
-    wxString get_test_failed_msg(wxString&) const override { return {}; }
-    bool upload(PrintHostUpload, ProgressFn, ErrorFn, InfoFn) const override { return true; }
-    bool has_auto_discovery() const override { return false; }
-    bool can_test() const override { return false; }
-    PrintHostPostUploadActions get_post_upload_actions() const override { return {}; }
-    std::string get_host() const override { return {}; }
-};
-
-std::string format_error(const std::string& body, const std::string& error, unsigned status)
-{
-    return TestPrintHost().format_error(body, error, status).ToStdString();
-}
-
-std::string envelope(int code, const std::string& message, const std::string& traceback)
-{
-    return nlohmann::json{{"error", {{"code", code}, {"message", message}, {"traceback", traceback}}}}.dump();
-}
-
-std::string moonraker_error(int code, const std::string& message, const std::string& detail = {})
-{
-    std::string line = "tornado.web.HTTPError: HTTP " + std::to_string(code) + ": " + message;
-    if (!detail.empty())
-        line += " (" + detail + ")";
-    return envelope(code, message, "Traceback (most recent call last):\n  ...\n" + line + "\n");
-}
-
-// A real Moonraker body for uploading a file that is being printed.
-constexpr const char* k_busy_file_403 =
-    R"JSON({"error": {"code": 403, "message": "Forbidden", "traceback": "Traceback (most recent call last):\n\n  File \"/home/lava/moonraker/moonraker/components/file_manager/file_manager.py\", line 1017, in _finish_gcode_upload\n    can_start = self._handle_operation_check(check_path)\n                ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^\n\nmoonraker.utils.exceptions.ServerError: File currently in use\n\nDuring handling of the above exception, another exception occurred:\n\nTraceback (most recent call last):\n\n  File \"/home/lava/moonraker/moonraker/components/application.py\", line 1069, in post\n    raise tornado.web.HTTPError(\ntornado.web.HTTPError: HTTP 403: Forbidden (File is loaded, upload not permitted)\n"}})JSON";
-
-} // namespace
-
-TEST_CASE("A Klipper upload error shows its reason instead of a Python traceback", "[PrintHost][Regression]")
-{
-    const std::string msg = format_error(k_busy_file_403, "", 403);
-    INFO("actual: " << msg);
-
-    CHECK(msg == "HTTP 403: Forbidden (File is loaded, upload not permitted)");
-    CHECK_THAT(msg, !Catch::Matchers::ContainsSubstring("Traceback"));
-    CHECK_THAT(msg, !Catch::Matchers::ContainsSubstring("file_manager.py"));
-}
-
-TEST_CASE("The specific cause is recovered from a file endpoint's traceback", "[PrintHost]")
-{
-    SECTION("a plain detail")
-    {
-        const std::string body = moonraker_error(403, "Forbidden", "File is loaded, upload not permitted");
-        CHECK(format_error(body, "", 403) == "HTTP 403: Forbidden (File is loaded, upload not permitted)");
-    }
-
-    SECTION("a detail whose own parentheses nest (a filename)")
-    {
-        const std::string detail = "Directory does not exist (/home/pi/gcodes/plate (1).gcode)";
-        const std::string body   = moonraker_error(400, "Bad Request", detail);
-        CHECK(format_error(body, "", 400) == "HTTP 400: Bad Request (" + detail + ")");
-    }
-
-    SECTION("a detail that contains the reason phrase")
-    {
-        const std::string body = moonraker_error(403, "Forbidden", "Forbidden zone: access denied");
-        CHECK(format_error(body, "", 403) == "HTTP 403: Forbidden (Forbidden zone: access denied)");
-    }
-
-    SECTION("a detail that spans lines")
-    {
-        const std::string detail = "Move out of range\nX=250.000 Y=10.000";
-        const std::string body   = moonraker_error(400, "Bad Request", detail);
-        CHECK(format_error(body, "", 400) == "HTTP 400: Bad Request (" + detail + ")");
-    }
-
-    SECTION("a detail that only repeats the reason phrase is dropped")
-    {
-        const std::string body = moonraker_error(401, "Unauthorized", "Unauthorized");
-        CHECK(format_error(body, "", 401) == "HTTP 401: Unauthorized");
-    }
-}
-
-TEST_CASE("An unhandled exception shows its type and message", "[PrintHost]")
-{
-    const std::string frame = "Traceback (most recent call last):\n"
-                              "  File \"/home/pi/moonraker/moonraker/components/file_manager/file_manager.py\", line 1, in write\n"
-                              "    self._write(data)\n";
-
-    SECTION("a one-line message")
-    {
-        const std::string body = envelope(500, "Internal Server Error", frame + "OSError: [Errno 28] No space left on device\n");
-        CHECK(format_error(body, "", 500) == "HTTP 500: Internal Server Error (OSError: [Errno 28] No space left on device)");
-    }
-
-    SECTION("a message that spans lines")
-    {
-        const std::string body = envelope(500, "Internal Server Error", frame + "ServerError: Klippy request failed\n  see klippy.log\n");
-        CHECK(format_error(body, "", 500) == "HTTP 500: Internal Server Error (ServerError: Klippy request failed\n  see klippy.log)");
-    }
-
-    SECTION("raised while handling an HTTPError with the same code")
-    {
-        const std::string traceback = frame + "tornado.web.HTTPError: HTTP 500: Internal Server Error (Database locked)\n\n"
-                                              "During handling of the above exception, another exception occurred:\n\n" +
-                                      frame + "OSError: [Errno 5] Input/output error\n";
-        const std::string body      = envelope(500, "Internal Server Error", traceback);
-        CHECK(format_error(body, "", 500) == "HTTP 500: Internal Server Error (OSError: [Errno 5] Input/output error)");
-    }
-
-    SECTION("a traceback with no header")
-    {
-        const std::string body = envelope(500, "Internal Server Error", "OSError: [Errno 5] Input/output error");
-        CHECK(format_error(body, "", 500) == "HTTP 500: Internal Server Error (OSError: [Errno 5] Input/output error)");
-    }
-}
-
-TEST_CASE("A reason already complete in message is shown unchanged", "[PrintHost]")
-{
-    SECTION("message is the whole reason, no trailing detail")
-    {
-        const std::string body = moonraker_error(503, "Klippy is not ready");
-        CHECK(format_error(body, "", 503) == "HTTP 503: Klippy is not ready");
-    }
-
-    SECTION("a message that itself contains parentheses is not duplicated")
-    {
-        const std::string reason = "Requested blocks (0-5) are unavailable";
-        const std::string body   = moonraker_error(400, reason);
-        CHECK(format_error(body, "", 400) == "HTTP 400: " + reason);
-    }
-}
-
-TEST_CASE("A Moonraker error with no usable detail shows just the reason phrase", "[PrintHost]")
-{
-    struct Case
-    {
-        const char* name;
-        const char* body;
-        unsigned status;
-        const char* expected;
-    };
-
-    const auto c = GENERATE(
-        Case{"an empty traceback", R"JSON({"error": {"code": 500, "message": "Internal Server Error", "traceback": ""}})JSON", 500,
-             "HTTP 500: Internal Server Error"},
-        Case{"a traceback of only whitespace", R"JSON({"error": {"code": 500, "message": "Internal Server Error", "traceback": "\n \n"}})JSON",
-             500, "HTTP 500: Internal Server Error"});
-
-    DYNAMIC_SECTION(c.name) { CHECK(format_error(c.body, "", c.status) == c.expected); }
-}
-
-TEST_CASE("A percent sign in the reason is not a format specifier", "[PrintHost]")
-{
-    const std::string body = moonraker_error(507, "Insufficient Storage", "disk 100% full");
-    CHECK(format_error(body, "", 507) == "HTTP 507: Insufficient Storage (disk 100% full)");
-}
-
-TEST_CASE("Error bodies that are not a Moonraker envelope are left unchanged", "[PrintHost]")
-{
-    SECTION("OctoPrint's string-valued error member")
-    {
-        const std::string body = R"JSON({"error": "File not found"})JSON";
-        CHECK(format_error(body, "", 404) == "HTTP 404: " + body);
-    }
-
-    SECTION("PrusaLink's top-level message, not under error")
-    {
-        const std::string body = R"JSON({"title": "Conflict", "message": "Printer is printing"})JSON";
-        CHECK(format_error(body, "", 409) == "HTTP 409: " + body);
-    }
-
-    SECTION("a body that is not JSON")
-    {
-        const std::string html = "<html><head><title>502 Bad Gateway</title></head></html>";
-        CHECK(format_error(html, "", 502) == "HTTP 502: " + html);
-    }
-
-    SECTION("an error object with no traceback")
-    {
-        const std::string body = R"JSON({"error": {"code": 500, "message": "Internal Server Error"}})JSON";
-        CHECK(format_error(body, "", 500) == "HTTP 500: " + body);
-    }
-
-    SECTION("an error object whose traceback is null")
-    {
-        const std::string body = R"JSON({"error": {"code": 500, "message": "Internal Server Error", "traceback": null}})JSON";
-        CHECK(format_error(body, "", 500) == "HTTP 500: " + body);
-    }
-
-    SECTION("an envelope whose reason phrase is empty")
-    {
-        const std::string body = envelope(403, "", "Traceback (most recent call last):\nOSError: denied\n");
-        CHECK(format_error(body, "", 403) == "HTTP 403: " + body);
-    }
-
-    SECTION("a transport error with no HTTP status")
-    {
-        CHECK(format_error("", "curl:Could not connect", 0) == "curl:Could not connect");
-    }
-}