Require numpy for the plugin tests in CI

.github/workflows/unit_tests.yml

@@ -44,6 +44,14 @@ jobs:
         uses: actions/download-artifact@v8
         with:
           name: ${{ inputs.artifact }}
+      # run_unit_tests.sh installs the plugin tests' numpy with the uv the build stages
+      # beside them; the Windows arm64 build bundles none, so put one on PATH there.
+      - name: Install uv
+        if: runner.os == 'Windows' && runner.arch == 'ARM64'
+        uses: astral-sh/setup-uv@v10.2.0
+        with:
+          version: "0.11.21"  # ORCA_UV_VERSION in CMakeLists.txt
+          enable-cache: false
       - uses: lukka/get-cmake@latest
         with:
           cmakeVersion: "~4.3.0"  # use most recent 4.3.x version

.gitignore

@@ -52,4 +52,6 @@ internal_docs/
 __pycache__/
 *.pyc
 *.opc
+/.test/
 docs/superpowers/
+ctest_results.xml

scripts/run_unit_tests.sh

@@ -2,7 +2,8 @@
 
 # This file is made to support the unit tests workflow.
 # It should only require the directories build/tests, scripts/, and tests/ to function,
-# and cmake (with ctest) installed.
+# and cmake (with ctest) installed -- plus network access to PyPI whenever numpy has to
+# be installed into a freshly built test tree (see below).
 # (otherwise, update the workflow too, but try to avoid to keep things self-contained)
 #
 # Usage: run_unit_tests.sh [TEST_DIR] [BUILD_CONFIG]
@@ -18,6 +19,52 @@ cd "${ROOT_DIR}" || exit 1
 TEST_DIR="${1:-build/tests}"
 BUILD_CONFIG="${2:-}"
 
+# The slic3rutils plugin-host tests build numpy arrays through the CPython copied next
+# to the test binary (see tests/slic3rutils/CMakeLists.txt), which ships no numpy.
+# Install it with the uv staged beside that runtime -- the tool the app installs plugin
+# dependencies with -- straight into the interpreter's own site-packages: no pip needed
+# in the runtime, no PYTHONPATH. Re-checked every run because a rebuild of the test
+# target re-copies the runtime; needs network whenever it installs. Pinned so a numpy
+# release cannot change results on its own.
+NUMPY_VERSION="2.5.3"
+
+# Without numpy those tests assert the numpy-absent error path instead, so a local run
+# only warns. Under CI it fails the run, which would otherwise stay green while silently
+# dropping the array coverage. (The Flatpak leg runs this inside `flatpak build`, whose
+# minimal environment has no CI, and its offline build stages no uv, so numpy stays
+# best-effort there.)
+numpy_unavailable() {
+    if [ -n "${CI:-}" ]; then
+        echo "error: $1" >&2
+        exit 1
+    fi
+    echo "warning: $1; the numpy-backed binding tests will cover only the numpy-absent path."
+}
+
+has_pinned_numpy() {
+    "${python_exe}" -c "import sys, numpy; sys.exit(numpy.__version__ != '${NUMPY_VERSION}')" >/dev/null 2>&1
+}
+
+find_args=("${TEST_DIR}" \( -path '*/python/bin/python3' -o -path '*/python/python.exe' \))
+# Multi-config trees hold one copy per configuration; only bootstrap the one being run.
+[ -n "${BUILD_CONFIG}" ] && find_args+=(-path "*/${BUILD_CONFIG}/*")
+python_exe="$(find "${find_args[@]}" -print -quit 2>/dev/null)"
+
+if [ -z "${python_exe}" ]; then
+    numpy_unavailable "no bundled Python under ${TEST_DIR}"
+elif ! has_pinned_numpy; then
+    uv_exe="${python_exe%/python/*}/tools/uv/uv"
+    # Builds that bundle no uv (Windows arm64) fall back to one on PATH.
+    [ -x "${uv_exe}" ] || uv_exe="$(command -v uv)"
+    echo "Installing numpy ${NUMPY_VERSION} into the embedded test interpreter (${python_exe})..."
+    if [ -z "${uv_exe}" ]; then
+        numpy_unavailable "no uv staged beside the tests or on PATH"
+    elif ! "${uv_exe}" pip install --python "${python_exe}" --only-binary :all: "numpy==${NUMPY_VERSION}" \
+            || ! has_pinned_numpy; then
+        numpy_unavailable "could not install numpy ${NUMPY_VERSION} into ${python_exe}"
+    fi
+fi
+
 # Run the whole suite, excluding tests tagged [NotWorking] and tests labelled RequiresApp,
 # which run the built orca-slicer binary that this directory does not contain.
 # --no-tests=error fails the job if the filter matches nothing (instead of passing green).

src/libslic3r/Fill/Fill.cpp

@@ -1692,9 +1692,9 @@ void Layer::make_ironing()
 				ironing_params.just_infill 	= false;
 				// ORCA: Get filament-specific overrides if configured, otherwise use process values
 				size_t extruder_idx = ironing_params.extruder - 1;
-				ironing_params.line_spacing = std::max(IRONING_SPACING_MIN, !config.filament_ironing_spacing.is_nil(extruder_idx)
+				ironing_params.line_spacing = (!config.filament_ironing_spacing.is_nil(extruder_idx)
 					? config.filament_ironing_spacing.get_at(extruder_idx)
-					: config.ironing_spacing.value);
+					: config.ironing_spacing);
                 ironing_params.inset = (!config.filament_ironing_inset.is_nil(extruder_idx)
 					? config.filament_ironing_inset.get_at(extruder_idx)
 					: config.ironing_inset);

src/libslic3r/Fill/FillConcentric.cpp

@@ -22,9 +22,6 @@ void FillConcentric::_fill_surface_single(
     
     coord_t min_spacing = scale_(this->spacing) * params.multiline;
     coord_t distance = coord_t(min_spacing / params.density);
-    // A non-positive step never shrinks the region, so the inset loop below would not end.
-    if (min_spacing <= 0 || distance <= 0)
-        return;
     
     if (params.density > 0.9999f && !params.dont_adjust) {
         distance = this->_adjust_solid_spacing(bounding_box.size()(0), distance);
@@ -111,8 +108,6 @@ void FillConcentric::_fill_surface_single(const FillParams& params,
     // no rotation is supported for this infill pattern
     Point   bbox_size = expolygon.contour.bounding_box().size();
     coord_t min_spacing = scaled<coord_t>(this->spacing);
-    if (min_spacing <= 0)
-        return;
 
     if (params.density > 0.9999f && !params.dont_adjust) {
         coord_t                loops_count = std::max(bbox_size.x(), bbox_size.y()) / min_spacing + 1;

src/libslic3r/GCode.cpp

@@ -2504,8 +2504,7 @@ void GCode::do_export(Print* print, const char* path, GCodeProcessorResult* resu
 
     {
         LifecycleEventContext ctx;
-        ctx.id = std::to_string(print->model().id().id);
-        ctx.name = print->get_model_name();
+        ctx.name = std::to_string(print->model().id().id);
         ctx.code = LifecycleEvtCode::Ok;
         ctx.msg  = path;
         ctx.cancellation_check = [print]() { return print->canceled(); };
@@ -2557,8 +2556,7 @@ void GCode::do_export(Print* print, const char* path, GCodeProcessorResult* resu
         }
         {
             LifecycleEventContext ctx;
-            ctx.id = std::to_string(print->model().id().id);
-            ctx.name = print->get_model_name();
+            ctx.name = std::to_string(print->model().id().id);
             ctx.code = LifecycleEvtCode::Error;
             ctx.msg  = std::string(path) + "\n" + err_msg;
             ctx.cancellation_check = [print]() { return print->canceled(); };
@@ -2582,8 +2580,7 @@ void GCode::do_export(Print* print, const char* path, GCodeProcessorResult* resu
         boost::nowide::remove(path_tmp.c_str());
         {
             LifecycleEventContext ctx;
-            ctx.id = std::to_string(print->model().id().id);
-            ctx.name = print->get_model_name();
+            ctx.name = std::to_string(print->model().id().id);
             ctx.code = LifecycleEvtCode::Error;
             ctx.msg  = std::string(path) + "\n" + ex.what();
             ctx.cancellation_check = [print]() { return print->canceled(); };
@@ -2696,8 +2693,7 @@ void GCode::do_export(Print* print, const char* path, GCodeProcessorResult* resu
     if (ret) {
         {
             LifecycleEventContext ctx;
-            ctx.id = std::to_string(print->model().id().id);
-            ctx.name = print->get_model_name();
+            ctx.name = std::to_string(print->model().id().id);
             ctx.code = LifecycleEvtCode::Error;
             ctx.msg  = std::string(path) + "\nFailed to rename the output G-code file: " + ret.message();
             ctx.cancellation_check = [print]() { return print->canceled(); };
@@ -2716,8 +2712,7 @@ void GCode::do_export(Print* print, const char* path, GCodeProcessorResult* resu
 
     {
         LifecycleEventContext ctx;
-        ctx.id = std::to_string(print->model().id().id);
-        ctx.name = print->get_model_name();
+        ctx.name = std::to_string(print->model().id().id);
         ctx.code = LifecycleEvtCode::Ok;
         ctx.msg  = path;
         ctx.cancellation_check = [print]() { return print->canceled(); };

src/libslic3r/Print.cpp

@@ -2717,8 +2717,7 @@ void Print::process(long long *time_cost_with_cache, bool use_cache)
 
     {
         LifecycleEventContext ctx;
-        ctx.id = std::to_string(m_model.id().id);
-        ctx.name = get_model_name();
+        ctx.name = std::to_string(m_model.id().id);
         ctx.code = LifecycleEvtCode::Ok;
         ctx.cancellation_check = [this]() { return canceled(); };
         fire_lifecycle_event(LifecycleEvent::SliceStarted, ctx);
@@ -3345,8 +3344,7 @@ void Print::process(long long *time_cost_with_cache, bool use_cache)
 
     {
         LifecycleEventContext ctx;
-        ctx.id = std::to_string(m_model.id().id);
-        ctx.name = get_model_name();
+        ctx.name = std::to_string(m_model.id().id);
         ctx.code = LifecycleEvtCode::Ok;
         ctx.cancellation_check = [this]() { return canceled(); };
         fire_lifecycle_event(LifecycleEvent::SliceGeometryFinished, ctx);
@@ -4952,8 +4950,7 @@ void Print::export_gcode_from_previous_file(const std::string& file, GCodeProces
 {
     {
         LifecycleEventContext ctx;
-        ctx.id = std::to_string(m_model.id().id);
-        ctx.name = get_model_name();
+        ctx.name = std::to_string(m_model.id().id);
         ctx.code = LifecycleEvtCode::Ok;
         ctx.msg  = file;
         ctx.cancellation_check = [this]() { return canceled(); };
@@ -4983,8 +4980,7 @@ void Print::export_gcode_from_previous_file(const std::string& file, GCodeProces
         BOOST_LOG_TRIVIAL(error) << __FUNCTION__ <<  boost::format(": found errors when process gcode file %1%") %file.c_str();
         {
             LifecycleEventContext ctx;
-            ctx.id = std::to_string(m_model.id().id);
-            ctx.name = get_model_name();
+            ctx.name = std::to_string(m_model.id().id);
             ctx.code = LifecycleEvtCode::Error;
             ctx.msg  = file + "\n" + ex.what();
             ctx.cancellation_check = [this]() { return canceled(); };
@@ -4998,8 +4994,7 @@ void Print::export_gcode_from_previous_file(const std::string& file, GCodeProces
 
     {
         LifecycleEventContext ctx;
-        ctx.id = std::to_string(m_model.id().id);
-        ctx.name = get_model_name();
+        ctx.name = std::to_string(m_model.id().id);
         ctx.code = LifecycleEvtCode::Ok;
         ctx.msg  = file;
         ctx.cancellation_check = [this]() { return canceled(); };

src/libslic3r/PrintConfig.hpp

@@ -178,10 +178,6 @@ enum class IroningType {
     Count,
 };
 
-// Smallest usable ironing line spacing. Anything tighter yields an unprintable number of lines,
-// and zero stops the fillers from making progress.
-constexpr double IRONING_SPACING_MIN = 0.05;
-
 //BBS
 enum class WallInfillOrder {
     InnerOuterInfill,

src/libslic3r/Support/SupportParameters.hpp

@@ -64,7 +64,7 @@ struct SupportParameters {
 
         this->ironing = object_config.support_ironing;
         this->ironing_flow = support_material_interface_flow.with_height(support_material_interface_flow.height() * 0.01 * object_config.support_ironing_flow.value);
-        this->ironing_spacing = std::max(IRONING_SPACING_MIN, object_config.support_ironing_spacing.value);
+        this->ironing_spacing = object_config.support_ironing_spacing;
         this->ironing_pattern = object_config.support_ironing_pattern;
 
         // Calculate a minimum support layer height as a minimum over all extruders, but not smaller than 10um.

src/slic3r/GUI/ConfigManipulation.cpp

@@ -210,30 +210,6 @@ void ConfigManipulation::check_filament_max_volumetric_speed(DynamicPrintConfig
 
 }
 
-void ConfigManipulation::check_filament_ironing_spacing(DynamicPrintConfig *config)
-{
-    const auto *opt = config->option<ConfigOptionFloatsNullable>("filament_ironing_spacing");
-    if (opt == nullptr)
-        return;
-    std::vector<double> values = opt->values;
-    bool                reset  = false;
-    for (size_t i = 0; i < values.size(); ++i)
-        if (!opt->is_nil(i) && values[i] < IRONING_SPACING_MIN) {
-            values[i] = 0.1;
-            reset     = true;
-        }
-    if (!reset)
-        return;
-    const wxString     msg_text = _(L("Ironing spacing too small\nIt has been reset to 0.1"));
-    MessageDialog      dialog(nullptr, msg_text, "", wxICON_WARNING | wxOK);
-    DynamicPrintConfig new_conf = *config;
-    is_msg_dlg_already_exist    = true;
-    dialog.ShowModal();
-    new_conf.set_key_value("filament_ironing_spacing", new ConfigOptionFloatsNullable(values));
-    apply(config, &new_conf);
-    is_msg_dlg_already_exist = false;
-}
-
 void ConfigManipulation::check_chamber_temperature(DynamicPrintConfig* config)
 {
    bool support_chamber_temp_control=GUI::wxGetApp().preset_bundle->printers.get_selected_preset().config.opt_bool("support_chamber_temp_control");
@@ -356,7 +332,7 @@ void ConfigManipulation::update_print_fff_config(DynamicPrintConfig* config, con
     }
 
     //BBS: ironing_spacing shouldn't be too small or equal to zero
-    if (config->opt_float("ironing_spacing") < IRONING_SPACING_MIN)
+    if (config->opt_float("ironing_spacing") < 0.05)
     {
         const wxString msg_text = _(L("Ironing spacing too small\nIt has been reset to 0.1"));
         MessageDialog dialog(nullptr, msg_text, "", wxICON_WARNING | wxOK);
@@ -367,7 +343,7 @@ void ConfigManipulation::update_print_fff_config(DynamicPrintConfig* config, con
         apply(config, &new_conf);
         is_msg_dlg_already_exist = false;
     }
-    if (config->opt_float("support_ironing_spacing") < IRONING_SPACING_MIN)
+    if (config->opt_float("support_ironing_spacing") < 0.05)
     {
         const wxString msg_text = _(L("Ironing spacing too small\nIt has been reset to 0.1"));
         MessageDialog dialog(nullptr, msg_text, "", wxICON_WARNING | wxOK);

src/slic3r/GUI/ConfigManipulation.hpp

@@ -84,7 +84,6 @@ public:
     void    check_nozzle_temperature_initial_layer_range(DynamicPrintConfig* config);
     void    check_adaptive_pressure_advance_model(DynamicPrintConfig* config);
     void    check_filament_max_volumetric_speed(DynamicPrintConfig *config);
-    void    check_filament_ironing_spacing(DynamicPrintConfig *config);
     void    check_chamber_temperature(DynamicPrintConfig* config);
     void    check_chamber_minimal_temperature(DynamicPrintConfig* config);
     bool    check_layer_height(DynamicPrintConfig* config);

src/slic3r/GUI/Plater.cpp

@@ -12800,6 +12800,8 @@ void Plater::priv::on_process_completed(SlicingProcessCompletedEvent &evt)
     notification_manager->set_slicing_progress_export_possible();
 
     // Reset the "export G-code path" name, so that the automatic background processing will be enabled again.
+    const std::string lifecycle_job_name = this->background_process.fff_print() ?
+        this->background_process.fff_print()->output_filename() : std::string();
     this->background_process.reset_export();
     // This bool stops showing export finished notification even when process_completed_with_error is false
     bool has_error = false;
@@ -12846,18 +12848,8 @@ void Plater::priv::on_process_completed(SlicingProcessCompletedEvent &evt)
 
     {
         Slic3r::LifecycleEventContext ctx;
-        if (const PrintBase* print = this->background_process.current_print()) {
-            const Model& model = print->model();
-            ctx.id             = std::to_string(model.id().id);
-            if (model.model_info)
-                ctx.name = model.model_info->model_name;
-        } else {
-            // Realistically Printbase* print will never be null because select_technology already asserts an active print
-            // and the worker thread asserts it before processing.
-            BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << ": slicing completed without an active print; lifecycle event has no model ID";
-        }
-        ctx.code = evt.cancelled() ? Slic3r::LifecycleEvtCode::Warn :
-                                     (has_error ? Slic3r::LifecycleEvtCode::Error : Slic3r::LifecycleEvtCode::Ok);
+        ctx.name = lifecycle_job_name;
+        ctx.code = evt.cancelled() ? Slic3r::LifecycleEvtCode::Warn : (has_error ? Slic3r::LifecycleEvtCode::Error : Slic3r::LifecycleEvtCode::Ok);
         ctx.msg  = evt.cancelled() ? "cancelled" : (has_error ? lifecycle_error_msg : std::string());
         Slic3r::fire_lifecycle_event(Slic3r::LifecycleEvent::SlicingJobComplete, ctx);
     }

src/slic3r/GUI/Tab.cpp

@@ -4905,7 +4905,6 @@ void TabFilament::update()
         return; // ys_FIXME
 
     m_config_manipulation.check_filament_max_volumetric_speed(m_config);
-    m_config_manipulation.check_filament_ironing_spacing(m_config);
 
     m_update_cnt++;
 

src/slic3r/plugin/PythonInterpreter.cpp

@@ -345,16 +345,21 @@ boost::filesystem::path find_bundled_python_home()
     fs::path bundle_python = fs::path(resources_dir()).parent_path() / "MacOS" / "python";
     if (valid_python_home(bundle_python))
         return bundle_python;
-#elif defined(_WIN32)
-    fs::path exe_python = boost::dll::program_location().parent_path() / "python";
-    if (valid_python_home(exe_python))
-        return exe_python;
-#else
+#elif !defined(_WIN32)
     fs::path linux_python = fs::path(resources_dir()).parent_path() / "lib" / "python";
     if (valid_python_home(linux_python))
         return linux_python;
 #endif
 
+    // Next to the executable: the Windows install layout, and the runtime copied
+    // beside every platform's unit-test binary (tests/slic3rutils/CMakeLists.txt).
+    // The CI test runner only receives the build/tests tree, so the candidates
+    // below -- all of which point into the deps or install trees -- never resolve
+    // there.
+    fs::path exe_python = boost::dll::program_location().parent_path() / "python";
+    if (valid_python_home(exe_python))
+        return exe_python;
+
     fs::path configured_python = ORCA_BUNDLED_PYTHON_ROOT;
     if (!configured_python.empty() && valid_python_home(configured_python))
         return configured_python;

tests/fff_print/test_fill.cpp

@@ -747,61 +747,6 @@ TEST_CASE("A region with ironing turned off is never ironed", "[Fill]")
     REQUIRE(Layer::choose_ironing_extruder(cfg, spiral_mode, /*is_topmost_layer=*/true) == -1);
 }
 
-// Ironing path count and total length in mm, over the whole object.
-static std::pair<size_t, double> ironing_extent(const Print &print)
-{
-    size_t paths  = 0;
-    double length = 0.;
-    for (const Layer *layer : print.objects().front()->layers())
-        for (const LayerRegion *region : layer->regions())
-            for (const ExtrusionEntity *entity : region->fills.flatten().entities)
-                if (ironing_role(entity->role())) {
-                    ++paths;
-                    length += unscale<double>(entity->length());
-                }
-    return {paths, length};
-}
-
-TEST_CASE("Ironing spacing below the minimum irons at the minimum spacing", "[Fill]")
-{
-    const std::string pattern      = GENERATE("rectilinear", "concentric");
-    const bool        via_filament = GENERATE(false, true);
-    const double      spacing      = GENERATE(0., 0.001);
-    CAPTURE(pattern, via_filament, spacing);
-
-    auto ironing_for = [&pattern, via_filament](double spacing) {
-        DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
-        config.set_deserialize_strict({{"ironing_type", "top"},
-                                       {"ironing_pattern", pattern},
-                                       {"layer_height", 0.2}});
-        // The filament override replaces the process spacing, which stays at a usable value.
-        if (via_filament)
-            config.set_deserialize_strict({{"ironing_spacing", 0.1}, {"filament_ironing_spacing", spacing}});
-        else
-            config.set_deserialize_strict({{"ironing_spacing", spacing}});
-        Print print;
-        Slic3r::Test::init_and_process_print({Slic3r::Test::cube(20)}, print, config);
-        return ironing_extent(print);
-    };
-
-    const std::pair<size_t, double> clamped = ironing_for(spacing);
-    const std::pair<size_t, double> minimum = ironing_for(IRONING_SPACING_MIN);
-    REQUIRE(minimum.first > 0);
-    CHECK(clamped.first == minimum.first);
-    CHECK_THAT(clamped.second, Catch::Matchers::WithinRel(minimum.second, 1e-9));
-}
-
-TEST_CASE("Concentric fill at zero spacing returns without paths", "[Fill]")
-{
-    std::unique_ptr<Fill> filler(Fill::new_from_type(ipConcentric));
-    filler->spacing      = 0.;
-    filler->bounding_box = BoundingBox(Point(0, 0), Point::new_scale(10, 10));
-    FillParams params;
-    params.density = 1.f;
-    Surface surface(stTop, ExPolygon({Point(0, 0), Point::new_scale(10, 0), Point::new_scale(10, 10), Point::new_scale(0, 10)}));
-    CHECK(filler->fill_surface(&surface, params).empty());
-}
-
 TEST_CASE("Solid infill direction offsets every layer when no template is set", "[Fill]")
 {
     auto angles_for = [](int direction) {

tests/fff_print/test_print.cpp

@@ -15,9 +15,6 @@
 #include "libslic3r/Layer.hpp"
 #include "libslic3r/Model.hpp"
 #include "libslic3r/GCodeReader.hpp"
-#include "libslic3r/GCode/GCodeProcessor.hpp"
-#include "libslic3r/Exception.hpp"
-#include "libslic3r/LifecycleEvents.hpp"
 
 #include "test_helpers.hpp"
 #include "test_utils.hpp"
@@ -25,10 +22,7 @@
 #include <algorithm>
 #include <fstream>
 #include <iterator>
-#include <memory>
 #include <string_view>
-#include <utility>
-#include <vector>
 
 using namespace Slic3r;
 using namespace Slic3r::Test;
@@ -230,88 +224,8 @@ std::string resolved_output_name(Model& model, const std::string& format, const
     return print.output_filename(filename_base);
 }
 
-struct ScopedLifecycleHook
-{
-    explicit ScopedLifecycleHook(LifecycleHookFn hook) { set_lifecycle_hook_fn(std::move(hook)); }
-    ~ScopedLifecycleHook() { set_lifecycle_hook_fn(nullptr); }
-};
-
 } // namespace
 
-TEST_CASE("Slicing lifecycle events identify the model", "[Print][LifecycleEvents]")
-{
-    struct ObservedEvent {
-        LifecycleEvent event;
-        std::string id;
-        std::string name;
-    };
-    std::vector<ObservedEvent> events;
-    ScopedLifecycleHook hook([&](LifecycleEvent event, const LifecycleEventContext& ctx) {
-        events.push_back({ event, ctx.id, ctx.name });
-    });
-
-    Print print;
-    Model model;
-    ModelInfo info;
-    info.model_name = "Lifecycle test model";
-    model.model_info = std::make_shared<ModelInfo>(std::move(info));
-    init_print({cube(20)}, print, model);
-
-    print.process();
-    ScopedTemporaryFile temp(".gcode");
-    print.export_gcode(temp.string(), nullptr, nullptr);
-    GCodeProcessorResult result;
-    print.export_gcode_from_previous_file(temp.string(), &result);
-
-    const std::string expected_id = std::to_string(print.model().id().id);
-    const std::vector<LifecycleEvent> expected_events = {
-        LifecycleEvent::SliceStarted,
-        LifecycleEvent::SliceGeometryFinished,
-        LifecycleEvent::GCodeExportStarted,
-        LifecycleEvent::GCodeExportFinished,
-        LifecycleEvent::GCodeExportStarted,
-        LifecycleEvent::GCodeExportFinished,
-    };
-    REQUIRE(events.size() == expected_events.size());
-    for (size_t i = 0; i < expected_events.size(); ++i) {
-        CHECK(events[i].event == expected_events[i]);
-        CHECK(events[i].id == expected_id);
-        CHECK(events[i].name == "Lifecycle test model");
-    }
-}
-
-TEST_CASE("Slicing lifecycle event name is empty without model metadata", "[Print][LifecycleEvents]")
-{
-    std::string event_id;
-    std::string event_name = "unset";
-    ScopedLifecycleHook hook([&](LifecycleEvent event, const LifecycleEventContext& ctx) {
-        if (event == LifecycleEvent::SliceStarted) {
-            event_id = ctx.id;
-            event_name = ctx.name;
-        }
-    });
-
-    Print print;
-    Model model;
-    init_print({cube(20)}, print, model);
-    print.process();
-
-    CHECK(event_id == std::to_string(print.model().id().id));
-    CHECK(event_name.empty());
-}
-
-TEST_CASE("Output filenames with numeric statistics fail before slicing finishes", "[Print][Regression]")
-{
-    DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
-    config.set_key_value("filename_format", new ConfigOptionString("{int(total_weight*10) / 10.0}"));
-
-    Print print;
-    Model model;
-    init_print({cube(20)}, print, model, config);
-
-    CHECK_THROWS_AS(print.output_filename(), PlaceholderParserError);
-}
-
 TEST_CASE("Print: {first_object_name} names the first printable object on the plate", "[Print]")
 {
     Model model;

tests/slic3rutils/CMakeLists.txt

@@ -49,9 +49,16 @@ if (WIN32)
         COMMENT "Copying Python runtime for slic3rutils plugin host API tests"
         VERBATIM
     )
-elseif (APPLE)
+elseif (NOT FLATPAK)
+    # The CI unit-test runner only receives the build/tests tree, so both the
+    # interpreter and the libpython the test binary links have to travel next to
+    # the executable; find_bundled_python_home() picks the copy up from there.
+    if (APPLE)
         target_link_options(${_TEST_NAME}_tests PRIVATE
             "LINKER:-rpath,@executable_path/python/lib")
+    else ()
+        set_property(TARGET ${_TEST_NAME}_tests APPEND PROPERTY BUILD_RPATH "$ORIGIN/python/lib")
+    endif ()
 
     add_custom_command(TARGET ${_TEST_NAME}_tests POST_BUILD
         COMMAND ${CMAKE_COMMAND} -E rm -rf
@@ -59,7 +66,7 @@ elseif (APPLE)
         COMMAND ${CMAKE_COMMAND} -E copy_directory
             "${CMAKE_PREFIX_PATH}/libpython"
             "$<TARGET_FILE_DIR:${_TEST_NAME}_tests>/python"
-        COMMENT "Copying Python runtime for macOS plugin host API tests"
+        COMMENT "Copying Python runtime for the plugin host API tests"
         VERBATIM
     )
 elseif (FLATPAK)
@@ -76,4 +83,16 @@ elseif (FLATPAK)
     )
 endif()
 
+# scripts/run_unit_tests.sh installs the tests' numpy into that runtime with this uv,
+# staged where the app build tree keeps it (<exe dir>/tools/uv, see src/CMakeLists.txt).
+if (ORCA_BUNDLED_UV_EXECUTABLE)
+    add_custom_command(TARGET ${_TEST_NAME}_tests POST_BUILD
+        COMMAND ${CMAKE_COMMAND} -E make_directory "$<TARGET_FILE_DIR:${_TEST_NAME}_tests>/tools/uv"
+        COMMAND ${CMAKE_COMMAND} -E copy_if_different "${ORCA_BUNDLED_UV_EXECUTABLE}"
+            "$<TARGET_FILE_DIR:${_TEST_NAME}_tests>/tools/uv/${ORCA_BUNDLED_UV_FILENAME}"
+        COMMENT "Copying uv for the plugin host API tests"
+        VERBATIM
+    )
+endif()
+
 orcaslicer_discover_tests(${_TEST_NAME}_tests)