Merge branch 'main' into feat/generic-n-extruders

.claude/skills/orca-wxwidgets/references/platforms.md

@@ -569,19 +569,12 @@ on the **first** call. So:
 #endif
 ```
 
-**Before GTK starts**, only the environment exists. `CLI::run` (`src/OrcaSlicer.cpp`) sets the NVIDIA
-DMABUF workaround and then branches on `GDK_BACKEND` (an `x11` prefix means the X11 opt-in). On both
-paths, when `/proc/driver/nvidia/version` exists and the linked WebKitGTK honours the switch (>= 2.44,
-`WebView::SupportsForceSharedMemory()`), it sets `WEBKIT_DMABUF_RENDERER_FORCE_SHM=1` and
-`WEBKIT_FORCE_DMABUF_RENDERER=1` (non-replacing): the proprietary driver cannot back WebKit's hardware
-DMABUF renderer. On a hypervisor guest (`/proc/cpuinfo` `hypervisor` flag) and WebKitGTK >= 2.44 it sets
-`WEBKIT_DMABUF_RENDERER_FORCE_SHM=1` alone, since virtual GPUs cannot back the hardware path either. On the default path it forces `GDK_BACKEND=x11` when wx lacks EGL and `WAYLAND_DISPLAY`
-is set, and sets `WEBKIT_DISABLE_COMPOSITING_MODE=1` (non-replacing) inside that branch when the linked
-WebKitGTK is older than 2.42: a forced X11 backend in a Wayland session is the only default-path case
-that runs through XWayland, which `DISPLAY` and `WAYLAND_DISPLAY` alone do not tell you (a native
-Wayland app inherits both). It calls `XInitThreads()`
+**Before GTK starts**, only the environment exists. `CLI::run` (`src/OrcaSlicer.cpp`) branches on
+`GDK_BACKEND` (an `x11` prefix means the X11 opt-in). On the default path it forces `GDK_BACKEND=x11`
+when wx lacks EGL and `WAYLAND_DISPLAY` is set. It sets `WEBKIT_DISABLE_COMPOSITING_MODE=1`
+(non-replacing) only when both `DISPLAY` and `WAYLAND_DISPLAY` are set, and calls `XInitThreads()`
 only when `DISPLAY` is set. With neither variable set, the GUI refuses to start ("Neither DISPLAY nor
-WAYLAND_DISPLAY set"). The details and the WebKit rules (c12912e0df) are in
+WAYLAND_DISPLAY set"). The details and the WebKit rule (c12912e0df) are in
 `references/webview-gl-aui-media.md` §WebKitGTK on Linux sessions.
 
 **wx's own detectors**, for reference:

.claude/skills/orca-wxwidgets/references/webview-gl-aui-media.md

@@ -61,8 +61,7 @@ available; GTK2/WebKit1 is an opt-out configuration the GUI does not support.
 11. A web host that re-themes in place handles `EVT_WEBVIEW_RECREATED` without `Skip()`; one that
     needs a reload lets it through. §[Orca wrapper](#orca-webview-wrapper-widgetswebview)
 12. Keep `WebViewWebKit`'s destructor removing the `"wx"` handler. §[Orca wrapper](#orca-webview-wrapper-widgetswebview)
-13. Do not widen `WEBKIT_DISABLE_COMPOSITING_MODE` beyond the no-EGL default path where Orca forces
-    `GDK_BACKEND=x11`, for WebKitGTK older than 2.42, and never
+13. Do not widen `WEBKIT_DISABLE_COMPOSITING_MODE` beyond Orca's default-path XWayland case, and never
     make a page's progress depend only on a C++→JS callback. §[WebKitGTK on Linux](#webkitgtk-on-linux-sessions)
 14. GL attribute lists: legacy `int[]` lists end with `0` and spell out `WX_GL_RGBA` and
     `WX_GL_DOUBLEBUFFER`; `wxGLAttributes`/`wxGLContextAttrs` end with `EndList()`; MSAA is requested
@@ -568,74 +567,33 @@ vue-resize workaround script and sets a persistent SQLite cookie store on the vi
 ## WebKitGTK on Linux sessions
 
 **Mechanism.** `CLI::run` (`src/OrcaSlicer.cpp`, under `#ifdef __WXGTK__`, before GTK initialises)
-sets the DMABUF workarounds and then branches on `GDK_BACKEND`:
-- **Both paths**, before the split: when `/proc/driver/nvidia/version` exists and the linked WebKitGTK
-  honours the switch (>= 2.44, `WebView::SupportsForceSharedMemory()`), it sets
-  `WEBKIT_DMABUF_RENDERER_FORCE_SHM=1` and `WEBKIT_FORCE_DMABUF_RENDERER=1` non-replacing. The
-  proprietary driver cannot back WebKit's hardware DMABUF renderer, so the shared-memory transport keeps
-  accelerated compositing instead of dropping it; `WEBKIT_FORCE_DMABUF_RENDERER` clears the
-  Debian/Ubuntu/openSUSE `isNVIDIA()` early return, which otherwise returns before the FORCE_SHM check.
-- **Hypervisor guests**, same position: when `is_hypervisor_guest()` (the `hypervisor` flag in
-  `/proc/cpuinfo`) and WebKitGTK >= 2.44, it sets `WEBKIT_DMABUF_RENDERER_FORCE_SHM=1` non-replacing.
-  Virtual GPUs (VirtualBox VMSVGA, VMware, QEMU) cannot back the hardware DMABUF path either, and
-  FORCE_SHM alone was confirmed to fix web views in VirtualBox; the `WEBKIT_FORCE_DMABUF_RENDERER` pair
-  is not needed without the Debian `isNVIDIA()` patch. The flag is x86-only, so ARM guests are not covered.
+branches on `GDK_BACKEND`:
 - **Default path** (`GDK_BACKEND` unset or not starting with `x11`): if wx lacks EGL (`!wxHAS_EGL`) and
-  `WAYLAND_DISPLAY` is set, it forces `GDK_BACKEND=x11`, and in that same branch it sets
-  `WEBKIT_DISABLE_COMPOSITING_MODE=1` non-replacing when the linked WebKitGTK predates 2.42
-  (`WebView::NeedsCompositingWorkaround()`). That forced X11 backend in a Wayland session is the only
-  default-path case that really runs through XWayland; `DISPLAY` and `WAYLAND_DISPLAY` alone do not
-  identify it, because a native Wayland app inherits both. `XInitThreads()` runs only when `DISPLAY` is
-  set.
+  `WAYLAND_DISPLAY` is set, it forces `GDK_BACKEND=x11`; it sets `WEBKIT_DISABLE_COMPOSITING_MODE=1`
+  non-replacing **only** when both `DISPLAY` and `WAYLAND_DISPLAY` are non-empty (a Wayland session with
+  XWayland available — the session, not the backend GTK will pick); `XInitThreads()` runs only when
+  `DISPLAY` is set.
 - **`GDK_BACKEND=x11…` opt-in path**: sets `DRI_PRIME=1` (and the NVIDIA PRIME variables when
   `/proc/driver/nvidia/version` exists), calls `XInitThreads()`, and deliberately does **not** disable
-  compositing, which keeps hardware acceleration for Device / Setup Wizard / login pages.
+  compositing (the comment: the WebKit2GTK XWayland bug appears fixed in WebKit2GTK ≥ 2.42, and leaving
+  compositing on keeps hardware acceleration for Device / Setup Wizard / login pages).
 
 Runtime backend detection elsewhere uses Orca's `is_running_on_wayland()` / `is_running_on_x11()`
 (see `references/platforms.md`), not these environment variables.
 
 **Pitfall.**
-- **Rule:** On NVIDIA and hypervisor guests reach for `WEBKIT_DMABUF_RENDERER_FORCE_SHM` before
-  `WEBKIT_DISABLE_COMPOSITING_MODE`. **Why:** the proprietary driver and virtual GPUs cannot back WebKit's
-  hardware DMABUF renderer, leaving web views blank or slow; FORCE_SHM keeps accelerated compositing and only
-  skips the hardware path, while disabling compositing drops it. Threaded scrolling is a separate,
-  release-dependent default (off in 2.44/2.45, on from 2.46). `WEBKIT_DISABLE_DMABUF_RENDERER` is not a
-  substitute — it is read first, leaves the transport set empty (no compositing from 2.44 on, where the
-  X11/Wayland fallback renderers were removed) and has a reported crash path. On Debian/Ubuntu and
-  openSUSE the `isNVIDIA()` patch returns before the FORCE_SHM check, so `WEBKIT_FORCE_DMABUF_RENDERER=1`
-  must clear it first; that variable exists only in those patches. WebKit reads all of these once per
-  process, before the first WebView.
-  The test is `/proc/driver/nvidia/version`, so a hybrid laptop that renders on its iGPU also takes the
-  shared-memory path, which is a per-frame GPU readback rather than zero-copy; exporting
-  `WEBKIT_DMABUF_RENDERER_FORCE_SHM=0` in the environment restores the hardware path.
-  ```cpp
-  // Wrong: kills compositing and threaded scrolling (and can crash on modern WebKit)
-  ::setenv("WEBKIT_DISABLE_DMABUF_RENDERER", "1", false);
-  // Right: keep compositing, skip only the hardware DMABUF path
-  if (::access("/proc/driver/nvidia/version", F_OK) == 0 && WebView::SupportsForceSharedMemory()) {
-      ::setenv("WEBKIT_DMABUF_RENDERER_FORCE_SHM", "1", /*replace*/ false);
-      ::setenv("WEBKIT_FORCE_DMABUF_RENDERER", "1", /*replace*/ false);
-  }
-  ```
-  Cite: WebKit 2.52.6 `Source/WebKit/UIProcess/gtk/AcceleratedBackingStore.cpp`
-  (`rendererBufferTransportMode()`), Debian `disable-nvidia-dmabuf.patch`, WebKit bug 262607.
-- **Rule:** Set `WEBKIT_DISABLE_COMPOSITING_MODE` only on the default path, in the branch where wx
-  lacks EGL and Orca forces `GDK_BACKEND=x11`, non-replacing (`setenv(..., false)`, so a value the user
-  already exported wins), before GTK
-  initialises; never unconditionally, and only for the WebKitGTK releases that need it (older than
-  2.42, `WebView::NeedsCompositingWorkaround()`). Keep JS-side fallbacks so a page never
+- **Rule:** Set `WEBKIT_DISABLE_COMPOSITING_MODE` only on the default path in Wayland sessions,
+  non-replacing (`setenv(..., false)`, so a value the user already exported wins), before GTK
+  initialises; never unconditionally. Keep JS-side fallbacks so a page never
   waits forever for a C++→JS call.
-  **Why:** WebKit2GTK accelerated compositing could fail silently under XWayland before 2.42, leaving
-  web views blank (Setup Wizard stuck on "Loading..."); the variable also turns off threaded scrolling,
-  so applying it on a newer WebKit needlessly drops both GPU compositing and async scrolling (the
-  Device tab loses its smoothness); without the JS timeout the user is stuck when the signal is lost.
+  **Why:** WebKit2GTK accelerated compositing could fail silently under XWayland, leaving web views
+  blank (Setup Wizard stuck on "Loading..."); disabling it everywhere needlessly drops hardware
+  acceleration; without the JS timeout the user is stuck when the signal is lost.
   ```cpp
   // Wrong: unconditional, kills HW acceleration everywhere
   ::setenv("WEBKIT_DISABLE_COMPOSITING_MODE", "1", false);
-  // Right (default path only): non-replacing, before GTK init, WebKitGTK < 2.42,
-  // and only in the branch that forces GDK_BACKEND=x11 (wx without EGL), the
-  // case that runs through XWayland
-  if (WebView::NeedsCompositingWorkaround() && wayland && *wayland)
+  // Right (default path only): non-replacing, before GTK init, Wayland session with XWayland
+  if (display && *display && wayland && *wayland)
       ::setenv("WEBKIT_DISABLE_COMPOSITING_MODE", "1", /*replace*/ false);
   ```
   Cite: c12912e0df (`src/OrcaSlicer.cpp`; `resources/web/guide/0/load.js` `OnInit`

CMakeLists.txt

@@ -288,19 +288,6 @@ if (APPLE)
     # Type"); Ninja/-Wall does not, and under -Werror it fails Xcode builds on code CI accepts.
     set(CMAKE_XCODE_ATTRIBUTE_GCC_WARN_64_TO_32_BIT_CONVERSION "NO")
 
-    # The Xcode generator ignores CMAKE_<LANG>_COMPILER_LAUNCHER, so hand the launcher to
-    # Xcode's own Compiler Launcher setting, which wraps every clang compile (C, C++,
-    # Objective-C++ and the precompiled header) with one program: the C++ launcher wins when
-    # both are set. The setting takes a single program path, not a CMake launcher list.
-    # Xcode versions without it ignore it and build uncached.
-    if (CMAKE_GENERATOR STREQUAL "Xcode")
-        if (CMAKE_CXX_COMPILER_LAUNCHER)
-            set(CMAKE_XCODE_ATTRIBUTE_C_COMPILER_LAUNCHER "${CMAKE_CXX_COMPILER_LAUNCHER}")
-        elseif (CMAKE_C_COMPILER_LAUNCHER)
-            set(CMAKE_XCODE_ATTRIBUTE_C_COMPILER_LAUNCHER "${CMAKE_C_COMPILER_LAUNCHER}")
-        endif ()
-    endif ()
-
     message(STATUS "Orca: IS_CROSS_COMPILE: ${IS_CROSS_COMPILE}")
 elseif (CMAKE_SYSTEM_NAME STREQUAL "Linux")
     set(CMAKE_INSTALL_RPATH "$ORIGIN")

build_linux.sh

@@ -22,7 +22,7 @@ function usage() {
     echo "   -g: run the requested build steps inside a Docker/Podman Ubuntu 24.04 container similar to the GitHub Actions Linux runner"
     echo "   -h: prints this help text"
     echo "   -i: build the Orca Slicer AppImage (optional)"
-    echo "   -p: disable precompiled headers (on by default): more ccache hits after header changes, slower misses"
+    echo "   -p: boost ccache hit rate by disabling precompiled headers (default: ON)"
     echo "   -r: skip RAM and disk checks (low RAM compiling)"
     echo "   -s: build the Orca Slicer (optional)"
     echo "   -t: build tests (optional), requires -s flag"
@@ -549,20 +549,6 @@ fi
 if [ -n "${CMAKE_CCACHE}" ] ; then
     echo "${CMAKE_CCACHE} found, enabling compiler caching..."
     export CMAKE_CCACHE_ARGS=(-DCMAKE_C_COMPILER_LAUNCHER="${CMAKE_CCACHE}" -DCMAKE_CXX_COMPILER_LAUNCHER="${CMAKE_CCACHE}")
-    # The same ccache settings as the CI build. Without this sloppiness ccache refuses every
-    # compile that uses the precompiled header, which is most of OrcaSlicer, and skips headers
-    # a checkout has just written. It is added to the sloppiness already configured, and
-    # CCACHE_SLOPPINESS or CCACHE_(NO)DEPEND set in the environment win.
-    if [[ "$(basename "${CMAKE_CCACHE}")" == ccache ]] ; then
-        if [[ -z "${CCACHE_SLOPPINESS+x}" ]] ; then
-            CCACHE_SLOPPINESS=$("${CMAKE_CCACHE}" --get-config sloppiness 2>/dev/null || true)
-            export CCACHE_SLOPPINESS="${CCACHE_SLOPPINESS:+${CCACHE_SLOPPINESS},}pch_defines,time_macros,include_file_mtime,include_file_ctime"
-        fi
-        # Hash the includes the compiler reports instead of preprocessing every miss.
-        if [[ -z "${CCACHE_DEPEND+x}${CCACHE_NODEPEND+x}" ]] ; then
-            export CCACHE_DEPEND=1
-        fi
-    fi
 else
     echo "Note: ccache or sccache are not found. Install either of them for faster rebuilds."
 fi

build_release_macos.sh

@@ -111,54 +111,6 @@ else
   export CMAKE_POLICY_COMPAT=""
 fi
 
-# Compiler cache, as in build_linux.sh. The program comes from CMAKE_CCACHE, else from a
-# launcher already set in the environment (the CI build sets ccache there), else sccache or
-# ccache from PATH; one program serves both languages. Each run applies its own choice to the
-# build directories, replacing a launcher an earlier run or a hand-run configure recorded.
-CMAKE_CCACHE_ARGS=()
-CCACHE_VAR=""
-for var in CMAKE_CCACHE CMAKE_CXX_COMPILER_LAUNCHER CMAKE_C_COMPILER_LAUNCHER; do
-    if [ -n "${!var:-}" ]; then
-        CCACHE_VAR=$var
-        break
-    fi
-done
-if [ -n "$CCACHE_VAR" ]; then
-    CCACHE_PROGRAM=${!CCACHE_VAR}
-    echo "Checking ${CCACHE_VAR} environment variable for compiler cache program..."
-    CMAKE_CCACHE=$(command -v "${CCACHE_PROGRAM}") || {
-        echo "${CCACHE_VAR} environment variable is set to '${CCACHE_PROGRAM}' but it was not found in PATH."
-        CMAKE_CCACHE=""
-    }
-elif command -v sccache >/dev/null 2>&1 ; then
-    CMAKE_CCACHE=$(command -v sccache)
-elif command -v ccache >/dev/null 2>&1 ; then
-    CMAKE_CCACHE=$(command -v ccache)
-fi
-if [ -n "${CMAKE_CCACHE}" ] ; then
-    echo "${CMAKE_CCACHE} found, enabling compiler caching..."
-    CMAKE_CCACHE_ARGS=(-DCMAKE_C_COMPILER_LAUNCHER="${CMAKE_CCACHE}" -DCMAKE_CXX_COMPILER_LAUNCHER="${CMAKE_CCACHE}")
-    # The same ccache settings as the CI build. Without this sloppiness ccache refuses every
-    # compile that uses the precompiled header, which is most of OrcaSlicer, and skips headers
-    # a checkout has just written. It is added to the sloppiness already configured, and
-    # CCACHE_SLOPPINESS or CCACHE_(NO)DEPEND set in the environment win.
-    if [[ "$(basename "${CMAKE_CCACHE}")" == ccache ]] ; then
-        if [[ -z "${CCACHE_SLOPPINESS+x}" ]] ; then
-            CCACHE_SLOPPINESS=$("${CMAKE_CCACHE}" --get-config sloppiness 2>/dev/null || true)
-            export CCACHE_SLOPPINESS="${CCACHE_SLOPPINESS:+${CCACHE_SLOPPINESS},}pch_defines,time_macros,include_file_mtime,include_file_ctime"
-        fi
-        # Hash the includes the compiler reports instead of preprocessing every miss.
-        if [[ -z "${CCACHE_DEPEND+x}${CCACHE_NODEPEND+x}" ]] ; then
-            export CCACHE_DEPEND=1
-        fi
-    fi
-else
-    echo "Note: ccache or sccache are not found. Install either of them for faster rebuilds."
-    # Clear a launcher recorded by an earlier configure. The entries must be set empty rather
-    # than removed: CMake fills a missing launcher entry from the environment.
-    CMAKE_CCACHE_ARGS=(-DCMAKE_C_COMPILER_LAUNCHER:STRING= -DCMAKE_CXX_COMPILER_LAUNCHER:STRING=)
-fi
-
 echo "Build params:"
 echo " - ARCH: $ARCH"
 echo " - BUILD_CONFIG: $BUILD_CONFIG"
@@ -210,7 +162,6 @@ function build_deps() {
                         -DCMAKE_OSX_ARCHITECTURES:STRING="${_ARCH}" \
                         -DCMAKE_OSX_DEPLOYMENT_TARGET="${OSX_DEPLOYMENT_TARGET}" \
                         -DCMAKE_IGNORE_PREFIX_PATH="${CMAKE_IGNORE_PREFIX_PATH}" \
-                        "${CMAKE_CCACHE_ARGS[@]}" \
                         ${CMAKE_POLICY_COMPAT}
                 fi
                 cmake --build . --config "$BUILD_CONFIG" --target deps
@@ -313,7 +264,6 @@ function build_slicer() {
                     -DCMAKE_OSX_ARCHITECTURES="${_ARCH}" \
                     -DCMAKE_OSX_DEPLOYMENT_TARGET="${OSX_DEPLOYMENT_TARGET}" \
                     -DCMAKE_IGNORE_PREFIX_PATH="${CMAKE_IGNORE_PREFIX_PATH}" \
-                    "${CMAKE_CCACHE_ARGS[@]}" \
                     ${CMAKE_POLICY_COMPAT}
             fi
             cmake --build . --config "$BUILD_CONFIG" --target "$SLICER_BUILD_TARGET"

deps/JPEG/JPEG.cmake

@@ -1,7 +1,22 @@
+if(CMAKE_SYSTEM_NAME STREQUAL "Linux")
+    if (JPEG_VERSION STREQUAL "6")
+        message("Using Jpeg Lib 62")
+        set(jpeg_flag "")
+    elseif (JPEG_VERSION STREQUAL "7")
+        message("Using Jpeg Lib 70")
+        set(jpeg_flag "-DWITH_JPEG7=ON")
+    else ()
+        message("Using Jpeg Lib 80")
+        set(jpeg_flag "-DWITH_JPEG8=ON")
+    endif ()
+endif()
+
 orcaslicer_add_cmake_project(JPEG
-    URL https://github.com/libjpeg-turbo/libjpeg-turbo/archive/refs/tags/3.2.0.zip
-    URL_HASH SHA256=1b4c2cb6cba1ca5e53b9e85eeeab02154cab4b70894c96e97a9c747a26d19d63
+    URL https://github.com/libjpeg-turbo/libjpeg-turbo/archive/refs/tags/3.0.1.zip
+    URL_HASH SHA256=d6d99e693366bc03897677650e8b2dfa76b5d6c54e2c9e70c03f0af821b0a52f
+    DEPENDS ${ZLIB_PKG}
     CMAKE_ARGS
         -DENABLE_SHARED=OFF
         -DENABLE_STATIC=ON
+        ${jpeg_flag}
 )

docs/HLSD/multi-extruder-ams.md

@@ -0,0 +1,199 @@
+# Multi-extruder and multi-AMS device control
+
+`DeviceManager`/`MachineObject` model the toolheads, AMS units, and filament slots of a connected
+printer and drive the device-control UI from that model. The model represents the counts as
+device-reported runtime values rather than compile-time caps, so a printer with an arbitrary number
+of toolheads, several AMS units, and a non-uniform number of slots per unit is handled by the same
+code paths. The printer agent is responsible for translating its printer's state into the shared
+JSON dialect this model consumes; the agent boundary is described in
+[printer-agent.md](printer-agent.md), and this document describes the dialect and the model.
+
+## Model layout
+
+`MachineObject` owns the device subsystems that this document covers:
+
+- `DevExtderSystem` — the toolheads (extruders) and their per-toolhead filament/temperature state.
+- `DevFilaSystem` — the AMS units (`DevAms`) and their trays (`DevAmsTray`).
+- `DevNozzleSystem` — the nozzles and, on rack printers, `DevNozzleRack`.
+- `DevFilaSwitch` — a filament switch that can feed several AMS units to more than one extruder.
+
+Each subsystem exposes its own count — `DevExtderSystem::GetTotalExtderCount()`,
+`DevFilaSystem::GetAmsCount()`, `DevAms::GetSlotCount()` — and the rest of the application derives
+its layout from those values rather than from fixed assumptions.
+
+## Wire dialect
+
+The dialect is the Bambu-shaped JSON that `DeviceManager` and `MachineObject` already consume. An
+agent whose printer speaks something else is expected to translate into it; the agent is not free
+to invent a new shape. Two representations coexist for extruders, and one for AMS/slots.
+
+### Extruders
+
+The generic representation is `print.device.extruder`, parsed by
+`ExtderSystemParser::ParseV2_0` (`DevExtruderSystem.cpp`). It has a packed `state` integer and an
+`info` array with one object per toolhead:
+
+```text
+device.extruder.state           packed integer
+  bits  0..3   total extruder count
+  bits  4..7   current extruder id
+  bits  8..11  target extruder id
+  bits 12..14  switch state
+  bits 15..18  currently loading extruder id
+  bit   19     busy for loading
+
+device.extruder.info[]          one entry per toolhead
+  id          extruder id
+  filam_bak   array of backup-group bits
+  info        bit 1 has filament, bit 2 buffer has filament, bit 3 nozzle present
+  temp        bits 0..15 current temperature, bits 16..31 target temperature
+  spre        slot_id bits 0..7, ams_id bits 8..15 (previous)
+  snow        same packing (current)
+  star        same packing (target)
+  stat        bit 0..15 AMS status, bits 16..31 RFID status
+  hnow        current nozzle id
+```
+
+The legacy single/dual representation is the pair of scalar fields `nozzle_temper` /
+`nozzle_target_temper`, plus the `print.ams.tray_tar` / `tray_now` tray pointer, parsed by
+`ExtderSystemParser::ParseV1_0`. That parser is a fallback and only fills the main extruder when the
+reported toolhead count is one.
+
+Physical extruder ids are fixed (`MAIN_EXTRUDER_ID = 0`, `DEPUTY_EXTRUDER_ID = 1`). Bambu printers
+present the two toolheads as a left/right pair and invert the physical-to-logical mapping; generic
+printers use the toolhead id itself as the logical id. `DevNozzle::GetLogicExtruderId()` /
+`GetExtruderId()` centralise that distinction.
+
+### AMS units and slots
+
+AMS units arrive as `print.ams.ams[]` and are parsed by `DevFilaSystemParser::ParseV1_0`. Each unit
+carries an `id` and an `info` bitfield:
+
+```text
+info bits  0..3    type: 0 dummy, 1 AMS, 2 AMS-Lite, 3 N3F, 4 N3S, 5 AMS-Lite-mixed (N9)
+info bits  8..11   bound extruder id (0xE marks a switch-bound unit)
+info bits 24..27   switch inlet when the unit is switch-bound
+```
+
+`DevAmsType` (`DevDefs.h`) enumerates the resulting unit kinds: `EXT_SPOOL`, `AMS`, `AMS_LITE`,
+`N3F`, `N3S`, and the `AMS_LITE_MIXED` N9 variant. `AMS_LITE_MIXED` reports itself as `AMS_LITE` to
+generic callers; code that needs the distinction uses `IsAmsLiteMixed()`.
+
+A unit whose bound-extruder nibble is `0xE` is switch-bound: it is kept only when a `DevFilaSwitch`
+is installed, in which case its extruder id is pinned to the main extruder and its binding set
+becomes `{0, 1}`; otherwise the unit is dropped from the AMS list.
+
+Each unit owns a map of `DevAmsTray` keyed by the tray id from the payload. The slot count is a
+property of the unit kind and the reported trays:
+
+- `AMS`, `AMS_LITE`, and `N3F` report four slots on Bambu printers, matching the firmware contract;
+- `N3S` reports one slot;
+- `EXT_SPOOL` and any non-Bambu unit report the number of trays actually present.
+
+The tray ids are the payload's slot indices; they are expected to be unique, 0-based, and contiguous
+within a unit, because the generic tray-index mapping below is cumulative.
+
+Bulk/extended spools are carried by `print.vir_slot`, which `DeviceManager` parses into
+`MachineObject::vt_slot`. Two ids are fixed: `VIRTUAL_TRAY_MAIN_ID = 255` (extruder 0) and
+`VIRTUAL_TRAY_DEPUTY_ID = 254` (extruder 1); the id convention is `vt_id = 255 - extruder_id`, so
+further extruders use 253, 252, … . The `vir_slot` parser recognises the 255/254 pair; the agent
+filament descriptor path `DevFilaSystemParser::ParseAgentFilament` is the entry that stores a fuller
+descending set in `vt_slot`.
+
+## Mapping
+
+Several subsystems relate AMS units, trays, and extruders, and more than one place derives a tray
+index. The Bambu mapping path (`DevMappingUtil`) computes `ams_id * 4 + slot_id` and knows only the
+Bambu unit kinds; `DevFilaSystem` provides the device model's own mapping below. The two agree for
+Bambu units and diverge for a non-Bambu unit whose slot count is not four.
+
+### AMS id to extruder id
+
+`DevFilaSystem::GetExtruderIdByAmsId()` resolves an AMS id to the extruder it feeds:
+
+- an AMS unit returns its bound extruder (`DevAms::GetExtruderId()`);
+- a virtual tray returns `VIRTUAL_TRAY_MAIN_ID - vt_id`;
+- Bambu's virtual AMS ids map to the main/deputy extruder.
+
+A unit may be bound to more than one extruder when a `DevFilaSwitch` feeds it; the binding set
+(`DevAms::m_binded_extruder_set`) and switch inlet are read by switch-aware code while the
+single-extruder id stays pinned for legacy callers.
+
+### Tray index
+
+`DevFilaSystem::GetTrayIndexMap()` maps a global tray index to an `(ams_id, slot_id)` pair and is
+used for backup-slot translation, calibration addressing, and the mapping popups.
+
+- Bambu AMS: `ams_id * 4 + slot_id`; N3S: the AMS id; AMS-Lite-mixed (N9): `24 + slot_id`.
+- Generic (non-Bambu): a running lane index — the count of trays in preceding units plus the slot
+  id. This depends on each unit's tray ids being 0-based and contiguous.
+
+### Virtual-slot recognition
+
+`devPrinterUtil::IsVirtualSlot()` decides whether an id denotes a virtual tray. On Bambu printers it
+is the fixed pair `{255, 254}`. On generic printers it is the descending range
+`[255 - count + 1, 255]`, where `count` is the selected printer preset's extruder count. The preset
+is expected to match the connected device; when the two disagree the virtual range is wrong, which
+is why a mismatch is reported rather than silently accepted.
+
+## Device-control UI
+
+The device-control widgets follow the same device-reported counts.
+
+- `AMSModel` (`AMSItem.hpp`) mirrors `DevAmsType` numerically: `EXT_AMS`, `GENERIC_AMS`, `AMS_LITE`,
+  `N3F_AMS`, `N3S_AMS`. A plain `AMS` maps to `GENERIC_AMS`.
+- On non-Bambu printers `use_generic_ams_layout()` routes `GENERIC_AMS` units through a variable-lane
+  rendering that draws one lane per reported tray; Bambu keeps its fixed four-slot rendering.
+- `AMSControl` picks its layout by toolhead count, not vendor: `CreateAmsSingleNozzle` for one
+  toolhead, `CreateAmsDoubleNozzle` for two, and `CreateAmsMultiNozzle` (one preview and one AMS
+  simplebook per toolhead) for three or more. A two-toolhead generic printer therefore keeps the
+  legacy left/right presentation; that is deliberate.
+- The status panel's `ExtruderImage` renders one per-toolhead state per nozzle and is resized to
+  `GetTotalExtderCount()`. Non-Bambu printers choose the active toolhead through
+  `m_generic_nozzle_selector` (shown when more than one toolhead exists); Bambu keeps its left/right
+  `m_nozzle_btn_panel`. Nozzle temperature controls are created on demand per toolhead.
+
+## Constraints
+
+- **Single dialect.** The agent translates its protocol into this JSON; the model does not learn
+  vendor protocols. Extending the model with a new unit kind or field means extending the dialect.
+- **Agent-produced counts.** Toolhead, AMS, and slot counts come from the device payload. Nothing
+  caps them at two toolheads or four slots except the Bambu contract described above.
+- **Extruder dialect invariants.** `device.extruder.state`'s count field must equal the length of
+  `info[]`, and `info[]` must be ordered by extruder id with `id` equal to the array index: the
+  parser places toolheads by array position while `GetExtderById()` indexes by id.
+- **One filament road per toolhead.** Each toolhead renders a single AMS filament road rather than an
+  independent per-toolhead road state. A generic scaffold that allowed the latter was removed as
+  unused; the one-extruder-per-toolhead road is the intended model.
+- **Preset/device agreement.** The generic layout and virtual-slot range derive their count from the
+  selected printer preset. A printer preset must therefore declare the same number of
+  `nozzle_diameter` entries as the device has toolheads. A mismatch is surfaced only as a log warning
+  (`StatusPanel::check_extruder_count_mismatch()`), deliberately log-only, because the sidebar and
+  extruder logic would otherwise silently disagree.
+- **Bambu compatibility.** Bambu-specific presentation (left/right pair, fixed 4-slot units, fixed
+  virtual ids, physical/logical inversion) is preserved behind the vendor check. Generic paths do
+  not alter it.
+- **Tray-index invariant.** The generic tray-index map is cumulative, so payload tray ids must be
+  unique, 0-based, and contiguous per unit. A malformed id is a producer error.
+- **Protocol markers.** The dialect has no neutral equivalent for some Bambu state, so agents that
+  lack it send empty `print.cfg`, `print.fun`, `print.aux`, and `print.stat`. Their presence selects
+  the new-protocol parse path; they are compatibility markers, not feature switches.
+
+## Main implementation locations
+
+- [`DevExtruderSystem`](../../src/slic3r/GUI/DeviceCore/DevExtruderSystem.h) — toolhead model and the
+  `device.extruder` parser
+- [`DevFilaSystem`](../../src/slic3r/GUI/DeviceCore/DevFilaSystem.h) — AMS/tray model, the AMS parser,
+  and the mapping helpers
+- [`DevDefs.h`](../../src/slic3r/GUI/DeviceCore/DevDefs.h) — `DevAmsType`, extruder ids, and virtual
+  tray ids
+- [`DeviceManager.cpp`](../../src/slic3r/GUI/DeviceManager.cpp) — message dispatch, `vir_slot`
+  parsing, and device state assembly
+- [`AMSControl.cpp`](../../src/slic3r/GUI/Widgets/AMSControl.cpp) — per-toolhead AMS panes
+  (`CreateAmsMultiNozzle`) and the generic layout
+- [`AMSItem.hpp`](../../src/slic3r/GUI/Widgets/AMSItem.hpp) — `AMSModel` and the variable-lane AMS
+  rendering
+- [`StatusPanel.cpp`](../../src/slic3r/GUI/StatusPanel.cpp) — `ExtruderImage`, the toolhead selector,
+  and per-toolhead temperature controls
+- [`MoonrakerPrinterAgent.cpp`](../../src/slic3r/Utils/MoonrakerPrinterAgent.cpp) — producer example
+  (AMS payload and the `device.extruder` encoding)

resources/images/toolbar_tooltip.svg

@@ -1 +1 @@
-<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 15 15"><rect x="1.5" y="3.5" width="12" height="8" rx="1" ry="1" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/><path d="M3,5h1v1h-1Z M5,5h1v1h-1Z M7,5h1v1h-1Z M9,5h1v1h-1Z M11,5h1v1h-1Z M4,7h1v1h-1Z M6,7h1v1h-1Z M8,7h1v1h-1Z M10,7h1v1h-1Z M5,9h5v1h-5Z" style="fill:#fefefe;"/></svg>
+<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 15 15"><rect x="7" y="12" width="1" height="1" style="fill:#fefefe;"/><path d="M4.5,5.5c0-1.71,1.43-3.09,3.16-3,1.62.08,2.84,1.54,2.84,3.17h0c0,.61-.25,1.2-.69,1.62l-2.31,2.24v.97" style="fill:none; stroke:#fefefe; stroke-linecap:round; stroke-linejoin:round;"/></svg>

resources/profiles/OrcaFilamentLibrary.json

@@ -592,10 +592,6 @@
 			"name": "SUNLU PETG @base",
 			"sub_path": "filament/SUNLU/SUNLU PETG @base.json"
 		},
-		{
-			"name": "School House Spools PETG @base",
-			"sub_path": "filament/SchoolHouseSpools/School House Spools PETG @base.json"
-		},
 		{
 			"name": "eSUN PETG @base",
 			"sub_path": "filament/eSUN/eSUN PETG @base.json"
@@ -1100,10 +1096,6 @@
 			"name": "SUNLU Wood PLA @base",
 			"sub_path": "filament/SUNLU/SUNLU Wood PLA @base.json"
 		},
-		{
-			"name": "School House Spools PLA @base",
-			"sub_path": "filament/SchoolHouseSpools/School House Spools PLA @base.json"
-		},
 		{
 			"name": "Valment PLA @base",
 			"sub_path": "filament/Valment/Valment PLA @base.json"
@@ -2268,10 +2260,6 @@
 			"name": "SUNLU PETG @System",
 			"sub_path": "filament/SUNLU/SUNLU PETG @System.json"
 		},
-		{
-			"name": "School House Spools PETG @System",
-			"sub_path": "filament/SchoolHouseSpools/School House Spools PETG @System.json"
-		},
 		{
 			"name": "eSUN PETG @System",
 			"sub_path": "filament/eSUN/eSUN PETG @System.json"
@@ -3824,10 +3812,6 @@
 			"name": "SUNLU Wood PLA @System",
 			"sub_path": "filament/SUNLU/SUNLU Wood PLA @System.json"
 		},
-		{
-			"name": "School House Spools PLA @System",
-			"sub_path": "filament/SchoolHouseSpools/School House Spools PLA @System.json"
-		},
 		{
 			"name": "Valment PLA @System",
 			"sub_path": "filament/Valment/Valment PLA @System.json"

resources/profiles/OrcaFilamentLibrary/filament/SchoolHouseSpools/School House Spools PETG @System.json

@@ -1,18 +0,0 @@
-{
-	"type": "filament",
-	"name": "School House Spools PETG @System",
-	"inherits": "School House Spools PETG @base",
-	"from": "system",
-	"setting_id": "RSu2orfhR8ktT36h",
-	"instantiation": "true",
-	"filament_max_volumetric_speed": [
-		"13"
-	],
-	"filament_long_retractions_when_cut": [
-		"1"
-	],
-	"filament_retraction_distances_when_cut": [
-		"18"
-	],
-	"compatible_printers": []
-}

resources/profiles/OrcaFilamentLibrary/filament/SchoolHouseSpools/School House Spools PETG @base.json

@@ -1,80 +0,0 @@
-{
-	"type": "filament",
-	"name": "School House Spools PETG @base",
-	"inherits": "fdm_filament_pet",
-	"from": "system",
-	"filament_id": "OFnaCGQ9",
-	"instantiation": "false",
-	"cool_plate_temp": [
-		"0"
-	],
-	"cool_plate_temp_initial_layer": [
-		"0"
-	],
-	"eng_plate_temp": [
-		"70"
-	],
-	"eng_plate_temp_initial_layer": [
-		"70"
-	],
-	"fan_cooling_layer_time": [
-		"30"
-	],
-	"fan_max_speed": [
-		"40"
-	],
-	"fan_min_speed": [
-		"10"
-	],
-	"filament_cost": [
-		"16.00"
-	],
-	"filament_density": [
-		"1.25"
-	],
-	"filament_flow_ratio": [
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"8"
-	],
-	"filament_multitool_ramming_flow": [
-		"8"
-	],
-	"filament_vendor": [
-		"School House Spools"
-	],
-	"hot_plate_temp": [
-		"70"
-	],
-	"hot_plate_temp_initial_layer": [
-		"70"
-	],
-	"nozzle_temperature": [
-		"252"
-	],
-	"nozzle_temperature_initial_layer": [
-		"252"
-	],
-	"nozzle_temperature_range_high": [
-		"270"
-	],
-	"nozzle_temperature_range_low": [
-		"230"
-	],
-	"overhang_fan_speed": [
-		"90"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"textured_plate_temp": [
-		"70"
-	],
-	"textured_plate_temp_initial_layer": [
-		"70"
-	]
-}

resources/profiles/OrcaFilamentLibrary/filament/SchoolHouseSpools/School House Spools PLA @System.json

@@ -1,18 +0,0 @@
-{
-	"type": "filament",
-	"name": "School House Spools PLA @System",
-	"inherits": "School House Spools PLA @base",
-	"from": "system",
-	"setting_id": "3rHJk6SVAvFzyHI0",
-	"instantiation": "true",
-	"filament_max_volumetric_speed": [
-		"21"
-	],
-	"filament_long_retractions_when_cut": [
-		"1"
-	],
-	"filament_retraction_distances_when_cut": [
-		"18"
-	],
-	"compatible_printers": []
-}

resources/profiles/OrcaFilamentLibrary/filament/SchoolHouseSpools/School House Spools PLA @base.json

@@ -1,35 +0,0 @@
-{
-	"type": "filament",
-	"name": "School House Spools PLA @base",
-	"inherits": "fdm_filament_pla",
-	"from": "system",
-	"filament_id": "OFHzwmT9",
-	"instantiation": "false",
-	"filament_cost": [
-		"17.00"
-	],
-	"filament_density": [
-		"1.26"
-	],
-	"filament_flow_ratio": [
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"filament_vendor": [
-		"School House Spools"
-	],
-	"filament_scarf_seam_type": [
-		"none"
-	],
-	"filament_scarf_height": [
-		"10%"
-	],
-	"filament_scarf_gap": [
-		"0%"
-	],
-	"filament_scarf_length": [
-		"10"
-	]
-}

resources/profiles/Ratrig.json

@@ -1,6 +1,6 @@
 {
 	"name": "RatRig",
-	"version": "02.04.00.07",
+	"version": "02.04.00.06",
 	"force_update": "0",
 	"description": "RatRig configurations",
 	"machine_model_list": [

resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.4 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.5 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.6 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.8 nozzle.json

@@ -107,7 +107,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.4 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.5 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.6 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.8 nozzle.json

@@ -107,7 +107,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.4 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.5 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.6 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.8 nozzle.json

@@ -107,7 +107,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300 0.4 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300 0.5 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300 0.6 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300 0.8 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400 0.4 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400 0.5 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400 0.6 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400 0.8 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500 0.4 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500 0.5 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500 0.6 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500 0.8 nozzle.json

@@ -106,7 +106,7 @@
 	"z_hop": [
 		"0.2"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}",
 	"change_filament_gcode": "M600",

resources/profiles/Ratrig/machine/fdm_klipper_common.json

@@ -131,7 +131,7 @@
 	"bed_exclude_area": [
 		"0x0"
 	],
-	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] EXTRUDER_OTHER_LAYER_TEMP=[nozzle_temperature] BED_TEMP=[bed_temperature_initial_layer_single]",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
 	"machine_end_gcode": "END_PRINT",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",

resources/web/dialog/PluginsDialog/index.html

@@ -18,7 +18,7 @@
   <script src="../js/plugin-config-ui.js"></script>
   <script src="./index.js"></script>
   <script src="./plugin-sort.js"></script>
-  <script src="../../js/fuzzy-search.js"></script>
+  <script src="../js/fuzzy-search.js"></script>
   <script src="./plugin-search.js"></script>
 </head>
 <body onLoad="OnInit()">

resources/web/homepage/js/home.js

@@ -156,16 +156,12 @@ function SetCloudMode( bOn )
 
 	m_CloudMode=bOn;
 	$("body").toggleClass("cloud-mode", bOn);
-
-	if( bOn )
-	{
-		$(".BtnItem").removeClass("BtnItemSelected");
-		$(".BtnShortcut").addClass("BtnItemSelected");
-	}
 }
 
 function GotoCloud()
 {
+	$(".BtnItem").removeClass("BtnItemSelected");
+	$(".BtnShortcut").addClass("BtnItemSelected");
 	SetCloudMode(true);
 	SendSimpleCommand("homepage_open_cloud");
 }

scripts/flatpak/com.orcaslicer.OrcaSlicer.yml

@@ -336,10 +336,10 @@ modules:
         sha256: 3d22d46c566b1761a0e15ea397589b3a5f36ac09b7c785382e6470156c04247f
         dest: external-packages/PNG
 
-      # libjpeg-turbo 3.2.0
+      # libjpeg-turbo 3.0.1
       - type: file
-        url: https://github.com/libjpeg-turbo/libjpeg-turbo/archive/refs/tags/3.2.0.zip
-        sha256: 1b4c2cb6cba1ca5e53b9e85eeeab02154cab4b70894c96e97a9c747a26d19d63
+        url: https://github.com/libjpeg-turbo/libjpeg-turbo/archive/refs/tags/3.0.1.zip
+        sha256: d6d99e693366bc03897677650e8b2dfa76b5d6c54e2c9e70c03f0af821b0a52f
         dest: external-packages/JPEG
 
       # Freetype 2.12.1

scripts/flatpak/entrypoint

@@ -1,7 +1,7 @@
 #!/usr/bin/env sh
 
-# WebKit's NVIDIA DMABUF workaround (gnome-build-meta#754) is applied by the
-# binary itself, gated on the runtime WebKitGTK version (src/OrcaSlicer.cpp).
+# Work-around https://gitlab.gnome.org/GNOME/gnome-build-meta/-/issues/754
+grep -q org.freedesktop.Platform.GL.nvidia /.flatpak-info && export WEBKIT_DISABLE_DMABUF_RENDERER=1
 
 # Work-around https://github.com/bambulab/BambuStudio/issues/3440
 # Use LC_NUMERIC instead of LC_ALL to prevent decimal separator issues

src/OrcaSlicer.cpp

@@ -163,7 +163,6 @@ using json = nlohmann::json;
 #include <X11/Xlib.h>
 #endif
 #include <unistd.h>
-#include "slic3r/GUI/Widgets/WebView.hpp"
 #endif
 
 #ifdef SLIC3R_GUI
@@ -1126,19 +1125,6 @@ static void load_downward_settings_list_from_config(std::string config_file, std
     }
 }
 
-#ifdef __WXGTK__
-// Virtual GPUs (VirtualBox, VMware, QEMU) cannot back WebKit's hardware DMABUF renderer.
-static bool is_hypervisor_guest()
-{
-    std::ifstream cpuinfo("/proc/cpuinfo");
-    std::string line;
-    while (std::getline(cpuinfo, line))
-        if (boost::starts_with(line, "flags"))
-            return line.find(" hypervisor") != std::string::npos;
-    return false;
-}
-#endif
-
 int CLI::run(int argc, char **argv)
 {
     // Mark the main thread for the debugger and for runtime checks.
@@ -1170,10 +1156,8 @@ int CLI::run(int argc, char **argv)
     // opt-in path. The ~2020-era WebKit2GTK XWayland compositor bug it
     // worked around appears fixed in WebKit2GTK >= 2.42; leaving it
     // unset preserves WebKit hardware acceleration on Device / Setup
-    // Wizard / login / store. The default path applies it only where it
-    // forces GDK_BACKEND=x11 below (a build without EGL, so the app really
-    // runs through XWayland), and only when the linked WebKitGTK predates
-    // the fix (< 2.42), as a conservative fallback for older WebKit.
+    // Wizard / login / store. The default path still applies it on
+    // XWayland sessions as a conservative fallback for older WebKit.
     // ------------------------------------------------------------------
     {
         const char* gdk_backend = ::getenv("GDK_BACKEND");
@@ -1181,17 +1165,6 @@ int CLI::run(int argc, char **argv)
         // honours the first backend in the comma-separated list).
         const bool x11_opt_in = gdk_backend && boost::starts_with(gdk_backend, "x11");
 
-        // NVIDIA's proprietary driver cannot back WebKitGTK's DMABUF renderer.
-        // Force the shared-memory transport, which keeps compositing and threaded
-        // scrolling; the second variable clears Debian/Ubuntu/openSUSE's isNVIDIA().
-        if (::access("/proc/driver/nvidia/version", F_OK) == 0 && WebView::SupportsForceSharedMemory()) {
-            ::setenv("WEBKIT_DMABUF_RENDERER_FORCE_SHM", "1", /* replace */ false);
-            ::setenv("WEBKIT_FORCE_DMABUF_RENDERER", "1", /* replace */ false);
-        }
-
-        if (is_hypervisor_guest() && WebView::SupportsForceSharedMemory())
-            ::setenv("WEBKIT_DMABUF_RENDERER_FORCE_SHM", "1", /* replace */ false);
-
         if (x11_opt_in) {
             // ===== X11 / XWayland (opted in via GDK_BACKEND=x11) =====
             BOOST_LOG_TRIVIAL(info) << "GDK_BACKEND=x11 detected; applying v2.3.2 X11/XWayland workarounds.";
@@ -1231,18 +1204,23 @@ int CLI::run(int argc, char **argv)
                 if (wayland_env && *wayland_env) {
                     BOOST_LOG_TRIVIAL(warning) << "Wayland detected but wxWidgets has no EGL support (wxHAS_EGL is OFF). Forcing X11 backend.";
                     ::setenv("GDK_BACKEND", "x11", true);
-
-                    // GTK will use X11 in a Wayland session here, which is the
-                    // one default-path case that really runs through XWayland.
-                    // WebKit2GTK accelerated compositing could fail silently
-                    // there on releases before 2.42, so force it off. Disabling
-                    // it also turns off threaded scrolling, hence the gate.
-                    if (WebView::NeedsCompositingWorkaround())
-                        ::setenv("WEBKIT_DISABLE_COMPOSITING_MODE", "1", /* replace */ false);
                 }
             }
             #endif
 
+            // WebKit2GTK compositing can fail under XWayland on older
+            // WebKit releases. Disable it only when both DISPLAY and
+            // WAYLAND_DISPLAY are set (i.e. an XWayland session is in
+            // use). On pure X11 or native Wayland, compositing is left
+            // enabled so WebKit retains HW acceleration.
+            {
+                const char* display_env_wk = ::getenv("DISPLAY");
+                const char* wayland_env_wk = ::getenv("WAYLAND_DISPLAY");
+                if (display_env_wk && *display_env_wk && wayland_env_wk && *wayland_env_wk) {
+                    ::setenv("WEBKIT_DISABLE_COMPOSITING_MODE", "1", /* replace */ false);
+                }
+            }
+
             // XInitThreads is needed before GStreamer may use Xlib. On
             // native Wayland without DISPLAY, GStreamer uses waylandsink
             // (no Xlib involved), so the call is skipped.

src/dev-utils/platform/unix/build_linux_image.sh.in

@@ -429,8 +429,7 @@ if [ "\$XDG_SESSION_TYPE" = "wayland" ] && [ "\$ZINK_DISABLE_OVERRIDE" != "1" ];
                 export __EGL_VENDOR_LIBRARY_FILENAMES=/usr/share/glvnd/egl_vendor.d/50_mesa.json
                 export MESA_LOADER_DRIVER_OVERRIDE=zink
                 export GALLIUM_DRIVER=zink
-                # WebKit's NVIDIA DMABUF workaround is applied by the binary itself,
-                # gated on the runtime WebKitGTK version (src/OrcaSlicer.cpp).
+                export WEBKIT_DISABLE_DMABUF_RENDERER=1
             fi
         fi
     fi

src/libslic3r/Arachne/WallToolPaths.cpp

@@ -812,8 +812,7 @@ bool WallToolPaths::removeEmptyToolPaths(std::vector<VariableWidthLines> &toolpa
      * Get the order constraints of the insets when printing walls per region / hole.
      * Each returned pair consists of adjacent wall lines where the left has an inset_idx one lower than the right.
      *
-     * Odd walls follow the same order as even ones, so that the centre line of a narrow wall is an inner wall
-     * like any other when printing inner to outer.
+     * Odd walls should always go after their enclosing wall polygons.
      *
      * \param outer_to_inner Whether the wall polygons with a lower inset_idx should go before those with a higher one.
  */
@@ -887,7 +886,12 @@ WallToolPaths::ExtrusionLineSet WallToolPaths::getRegionOrder(const std::vector<
                 continue; // not directly adjacent
             if (!shorter_then(loc_here - lineloc_nearby.j.p, (lineloc_here.j.w + lineloc_nearby.j.w) / 2 * diagonal_extension))
                 continue; // points are too far away from each other
-            if ((nearby->inset_idx < here->inset_idx) == outer_to_inner) {
+            if (here->is_odd || nearby->is_odd) {
+                if (here->is_odd && !nearby->is_odd && nearby->inset_idx < here->inset_idx)
+                    order_requirements.emplace(std::make_pair(nearby, here));
+                if (nearby->is_odd && !here->is_odd && here->inset_idx < nearby->inset_idx)
+                    order_requirements.emplace(std::make_pair(here, nearby));
+            } else if ((nearby->inset_idx < here->inset_idx) == outer_to_inner) {
                 order_requirements.emplace(std::make_pair(nearby, here));
             } else {
                 assert((nearby->inset_idx > here->inset_idx) == outer_to_inner);

src/libslic3r/GCode.cpp

@@ -432,36 +432,27 @@ static std::vector<Vec2d> get_path_of_change_filament(const Print& print)
 
     std::string OozePrevention::pre_toolchange(GCode& gcodegen)
     {
+        std::string gcode;
+
         unsigned int extruder_id = gcodegen.writer().filament()->id();
-
-        // Check if this tool will ever be used again in this print.
-        bool is_last_use = false;
-        if (gcodegen.m_print != nullptr && !gcodegen.m_print->tool_ordering().empty()) {
-            coordf_t current_z        = gcodegen.layer() ? gcodegen.layer()->print_z : gcodegen.writer().get_position().z();
-            const auto& tool_ordering = gcodegen.m_print->tool_ordering();
-            const auto& cfg           = gcodegen.config();
-            const int heater          = imex_physical_heater_for(cfg.is_imex.value, cfg.physical_extruder_map, int(extruder_id));
-            is_last_use               = tool_ordering.is_last_extrusion_layer(current_z, extruder_id);
-            for (unsigned int f : tool_ordering.all_extruders())
-                if (is_last_use && imex_physical_heater_for(cfg.is_imex.value, cfg.physical_extruder_map, int(f)) == heater)
-                    is_last_use = tool_ordering.is_last_extrusion_layer(current_z, f);
-        }
-
-        int temp = 0;
-        if (!is_last_use) {
-            const auto& filament_idle_temp = gcodegen.config().idle_temperature;
-            if (filament_idle_temp.get_at(extruder_id) == 0) {
-                if (gcodegen.config().standby_temperature_delta.value == 0)
-                    return std::string();
-                temp = this->_get_temp(gcodegen) + gcodegen.config().standby_temperature_delta.value;
-            } else {
-                temp = filament_idle_temp.get_at(extruder_id);
+        const auto& filament_idle_temp = gcodegen.config().idle_temperature;
+        if (filament_idle_temp.get_at(extruder_id) == 0) {
+            // There is no idle temperature defined in filament settings.
+            // Use the delta value from print config.
+            if (gcodegen.config().standby_temperature_delta.value != 0) {
+                // we assume that heating is always slower than cooling, so no need to block
+                gcode += gcodegen.writer().set_temperature
+                (this->_get_temp(gcodegen) + gcodegen.config().standby_temperature_delta.value, false, extruder_id);
+                gcode.pop_back();
+                gcode += " ;cooldown\n"; // this is a marker for GCodeProcessor, so it can supress the commands when needed
             }
+        } else {
+            // Use the value from filament settings. That one is absolute, not delta.
+            gcode += gcodegen.writer().set_temperature(filament_idle_temp.get_at(extruder_id), false, extruder_id);
+            gcode.pop_back();
+            gcode += " ;cooldown\n"; // this is a marker for GCodeProcessor, so it can supress the commands when needed
         }
 
-        std::string gcode = gcodegen.writer().set_temperature(temp, false, extruder_id);
-        gcode.pop_back();
-        gcode += " ;cooldown\n"; // this is a marker for GCodeProcessor, so it can supress the commands when needed
         return gcode;
     }
 
@@ -3985,16 +3976,6 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato
     this->placeholder_parser().set("print_time_minute", new ConfigOptionString(GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Print_Time_Minute_Placeholder)));
     this->placeholder_parser().set("print_time_sec", new ConfigOptionString(GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Print_Time_Sec_Placeholder)));
     this->placeholder_parser().set("used_filament_length", new ConfigOptionString(GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Used_Filament_Length_Placeholder)));
-    // The final print statistics are known only after the whole G-code is generated, so they are filled in during post-processing too.
-    // The running extruded_* totals are left alone; profiles use them as numbers.
-    this->placeholder_parser().set("used_filament", new ConfigOptionString(GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Used_Filament_Length_Placeholder)));
-    this->placeholder_parser().set("print_time", new ConfigOptionString(GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Normal_Print_Time_Placeholder)));
-    this->placeholder_parser().set("normal_print_time", new ConfigOptionString(GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Normal_Print_Time_Placeholder)));
-    this->placeholder_parser().set("silent_print_time", new ConfigOptionString(GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Silent_Print_Time_Placeholder)));
-    this->placeholder_parser().set("total_weight", new ConfigOptionString(GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Total_Weight_Placeholder)));
-    this->placeholder_parser().set("total_cost", new ConfigOptionString(GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Total_Cost_Placeholder)));
-    this->placeholder_parser().set("total_wipe_tower_cost", new ConfigOptionString(GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Total_Wipe_Tower_Cost_Placeholder)));
-    this->placeholder_parser().set("total_wipe_tower_filament", new ConfigOptionString(GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Total_Wipe_Tower_Filament_Placeholder)));
 
     // Sync variant-mapped params into placeholder_parser before processing start gcode
     update_placeholder_parser_with_variant_params();

src/libslic3r/GCode.hpp

@@ -1004,7 +1004,6 @@ protected:
         size_t                                                  num_objects,
         size_t                                                  num_islands);
 
-    friend class OozePrevention;
     friend class Wipe;
     friend class WipeTowerIntegration;
     friend class PressureEqualizer;

src/libslic3r/GCode/GCodeProcessor.cpp

@@ -120,13 +120,7 @@ const std::vector<std::string> GCodeProcessor::Reserved_Tags = {
     "@PRINT_TIME_HOUR@",
     "@PRINT_TIME_MINUTE@",
     "@PRINT_TIME_SEC@",
-    "@USED_FILAMENT_LENGTH@",
-    "@NORMAL_PRINT_TIME@",
-    "@SILENT_PRINT_TIME@",
-    "@TOTAL_WEIGHT@",
-    "@TOTAL_COST@",
-    "@TOTAL_WIPE_TOWER_COST@",
-    "@TOTAL_WIPE_TOWER_FILAMENT@"
+    "@USED_FILAMENT_LENGTH@"
 };
 
 const std::vector<std::string> GCodeProcessor::Reserved_Tags_compatible = {
@@ -153,13 +147,7 @@ const std::vector<std::string> GCodeProcessor::Reserved_Tags_compatible = {
     "@PRINT_TIME_HOUR@",
     "@PRINT_TIME_MINUTE@",
     "@PRINT_TIME_SEC@",
-    "@USED_FILAMENT_LENGTH@",
-    "@NORMAL_PRINT_TIME@",
-    "@SILENT_PRINT_TIME@",
-    "@TOTAL_WEIGHT@",
-    "@TOTAL_COST@",
-    "@TOTAL_WIPE_TOWER_COST@",
-    "@TOTAL_WIPE_TOWER_FILAMENT@"
+    "@USED_FILAMENT_LENGTH@"
 };
 
 
@@ -1276,22 +1264,19 @@ void GCodeProcessor::run_post_process()
         return ret;
     };
 
-    // Process inline placeholders (print_time_*, used_filament_length and the print statistics known only after export)
+    // Process inline placeholders (print_time_total_sec, print_time_day, print_time_hour, print_time_minute, print_time_sec and used_filament_length)
     auto process_inline_placeholders = [&](std::string& gcode_line) {
         bool processed = false;
         // Every inline placeholder contains '@', so a line without one has nothing to replace.
         if (gcode_line.find('@') == std::string::npos)
             return processed;
 
-        auto replace_tag = [&gcode_line, &processed](ETags tag, const std::string& value) {
-            const std::string& placeholder = reserved_tag(tag);
-            size_t pos = gcode_line.find(placeholder);
-            while (pos != std::string::npos) {
-                gcode_line.replace(pos, placeholder.length(), value);
-                processed = true;
-                pos = gcode_line.find(placeholder, pos + value.length());
-            }
-        };
+        const std::string& print_time_total_placeholder = reserved_tag(ETags::Print_Time_Total_Sec_Placeholder);
+        const std::string& print_time_day_placeholder = reserved_tag(ETags::Print_Time_Day_Placeholder);
+        const std::string& print_time_hour_placeholder = reserved_tag(ETags::Print_Time_Hour_Placeholder);
+        const std::string& print_time_minute_placeholder = reserved_tag(ETags::Print_Time_Minute_Placeholder);
+        const std::string& print_time_sec_placeholder = reserved_tag(ETags::Print_Time_Sec_Placeholder);
+        const std::string& used_filament_placeholder = reserved_tag(ETags::Used_Filament_Length_Placeholder);
 
         double print_time_total_sec = m_time_processor.machines[static_cast<size_t>(PrintEstimatedStatistics::ETimeMode::Normal)].time;
         if (print_time_total_sec < 0.0)
@@ -1304,31 +1289,70 @@ void GCodeProcessor::run_post_process()
         int print_time_minute = (day_remainder_seconds % 3600) / 60;
         int print_time_sec = day_remainder_seconds % 60;
 
-        double total_filament_mm = 0.0;
-        for (const auto& mm : filament_mm) {
-            total_filament_mm += mm;
+        // Replace print_time_total_sec
+        size_t pos = gcode_line.find(print_time_total_placeholder);
+        while (pos != std::string::npos) {
+            char buf[64];
+            sprintf(buf, "%.2f", print_time_total_sec);
+            gcode_line.replace(pos, print_time_total_placeholder.length(), buf);
+            processed = true;
+            pos = gcode_line.find(print_time_total_placeholder, pos + strlen(buf));
         }
 
-        replace_tag(ETags::Print_Time_Total_Sec_Placeholder, Slic3r::float_to_string_decimal_point(print_time_total_sec, 2));
-        replace_tag(ETags::Print_Time_Day_Placeholder, std::to_string(print_time_day));
-        replace_tag(ETags::Print_Time_Hour_Placeholder, std::to_string(print_time_hour));
-        replace_tag(ETags::Print_Time_Minute_Placeholder, std::to_string(print_time_minute));
-        replace_tag(ETags::Print_Time_Sec_Placeholder, std::to_string(print_time_sec));
-        replace_tag(ETags::Used_Filament_Length_Placeholder,
-                    Slic3r::float_to_string_decimal_point(total_filament_mm / 1000.0, 2)); // Convert mm to m
-        // Same values as the print statistics that filename_format gets (PrintStatistics::config(), filled in by
-        // update_print_estimated_stats() in GCode.cpp), which runs only after this post-processing.
-        replace_tag(ETags::Normal_Print_Time_Placeholder, get_time_dhm(PrintEstimatedStatistics::ETimeMode::Normal));
-        replace_tag(ETags::Silent_Print_Time_Placeholder, is_stealth_time_estimator_enabled() ?
-                                                              get_time_dhm(PrintEstimatedStatistics::ETimeMode::Stealth) :
-                                                              short_time("N/A"));
-        const double total_cost = filament_total_cost + m_print->config().time_cost.value * print_time_total_sec / 3600.0;
-        replace_tag(ETags::Total_Weight_Placeholder, Slic3r::float_to_string_decimal_point(filament_total_g, 2));
-        replace_tag(ETags::Total_Cost_Placeholder, Slic3r::float_to_string_decimal_point(total_cost, 2));
-        replace_tag(ETags::Total_Wipe_Tower_Cost_Placeholder,
-                    Slic3r::float_to_string_decimal_point(m_print->print_statistics().total_wipe_tower_cost, 2));
-        replace_tag(ETags::Total_Wipe_Tower_Filament_Placeholder,
-                    Slic3r::float_to_string_decimal_point(m_print->print_statistics().total_wipe_tower_filament, 2));
+        // Replace print_time_day
+        pos = gcode_line.find(print_time_day_placeholder);
+        while (pos != std::string::npos) {
+            char buf[64];
+            sprintf(buf, "%d", print_time_day);
+            gcode_line.replace(pos, print_time_day_placeholder.length(), buf);
+            processed = true;
+            pos = gcode_line.find(print_time_day_placeholder, pos + strlen(buf));
+        }
+
+        // Replace print_time_hour
+        pos = gcode_line.find(print_time_hour_placeholder);
+        while (pos != std::string::npos) {
+            char buf[64];
+            sprintf(buf, "%d", print_time_hour);
+            gcode_line.replace(pos, print_time_hour_placeholder.length(), buf);
+            processed = true;
+            pos = gcode_line.find(print_time_hour_placeholder, pos + strlen(buf));
+        }
+
+        // Replace print_time_minute
+        pos = gcode_line.find(print_time_minute_placeholder);
+        while (pos != std::string::npos) {
+            char buf[64];
+            sprintf(buf, "%d", print_time_minute);
+            gcode_line.replace(pos, print_time_minute_placeholder.length(), buf);
+            processed = true;
+            pos = gcode_line.find(print_time_minute_placeholder, pos + strlen(buf));
+        }
+
+        // Replace print_time_sec
+        pos = gcode_line.find(print_time_sec_placeholder);
+        while (pos != std::string::npos) {
+            char buf[64];
+            sprintf(buf, "%d", print_time_sec);
+            gcode_line.replace(pos, print_time_sec_placeholder.length(), buf);
+            processed = true;
+            pos = gcode_line.find(print_time_sec_placeholder, pos + strlen(buf));
+        }
+
+        // Replace used_filament_length
+        pos = gcode_line.find(used_filament_placeholder);
+        while (pos != std::string::npos) {
+            double total_filament_mm = 0.0;
+            for (const auto& mm : filament_mm) {
+                total_filament_mm += mm;
+            }
+            double used_filament_length = total_filament_mm / 1000.0; // Convert mm to m
+            char buf[64];
+            sprintf(buf, "%.2f", used_filament_length);
+            gcode_line.replace(pos, used_filament_placeholder.length(), buf);
+            processed = true;
+            pos = gcode_line.find(used_filament_placeholder, pos + strlen(buf));
+        }
 
         return processed;
     };

src/libslic3r/GCode/GCodeProcessor.hpp

@@ -601,12 +601,6 @@ inline constexpr float DEFAULT_FILAMENT_DENSITY = 1.245f;
             Print_Time_Minute_Placeholder,
             Print_Time_Sec_Placeholder,
             Used_Filament_Length_Placeholder,
-            Normal_Print_Time_Placeholder,
-            Silent_Print_Time_Placeholder,
-            Total_Weight_Placeholder,
-            Total_Cost_Placeholder,
-            Total_Wipe_Tower_Cost_Placeholder,
-            Total_Wipe_Tower_Filament_Placeholder,
         };
 
         static const std::string& reserved_tag(ETags tag) { return s_IsBBLPrinter ? Reserved_Tags[static_cast<unsigned char>(tag)] : Reserved_Tags_compatible[static_cast<unsigned char>(tag)]; }

src/libslic3r/GCode/ToolOrdering.cpp

@@ -1276,13 +1276,6 @@ void ToolOrdering::collect_extruder_statistics(bool prime_multi_material)
         sort_remove_duplicates(m_all_printing_extruders);
     }
 
-    m_last_layer_per_extruder.clear();
-    for (const LayerTools& lt : m_layer_tools) {
-        for (unsigned int ext : lt.extruders) {
-            m_last_layer_per_extruder[ext] = lt.print_z;
-        }
-    }
-
     if (prime_multi_material && ! m_all_printing_extruders.empty()) {
         // Reorder m_all_printing_extruders in the sequence they will be primed, the last one will be m_first_printing_extruder.
         // Then set m_first_printing_extruder to the 1st extruder primed.
@@ -3671,11 +3664,5 @@ int WipingExtrusions::get_support_interface_extruder_overrides(const PrintObject
     return -1;
 }
 
-bool ToolOrdering::is_last_extrusion_layer(coordf_t print_z, unsigned int extruder_id) const
-{
-    auto it = m_last_layer_per_extruder.find(extruder_id);
-    if (it == m_last_layer_per_extruder.end())
-        return true;
-    return print_z >= it->second - EPSILON;
-}
+
 } // namespace Slic3r

src/libslic3r/GCode/ToolOrdering.hpp

@@ -370,7 +370,6 @@ public:
                                                   std::vector<int> & initial_filaments);
 
     bool                has_non_support_filament(const PrintConfig &config);
-    bool                is_last_extrusion_layer(coordf_t print_z, unsigned int extruder_id) const;
 
 private:
     void				initialize_layers(std::vector<coordf_t> &zs);
@@ -414,8 +413,6 @@ private:
     // which keeps every legacy per-object code path bit-identical (loops over an empty map are
     // no-ops; downstream emission falls through to the per-object branch).
     std::map<unsigned int, std::map<LayerTools::MixedSubLayerGroup::VolumeKey, std::vector<size_t>>> m_gradient_volume_layers;
-    // Map: extruder_id -> print_z (z coordinate) of the last layer it is used on
-    std::map<unsigned int, coordf_t> m_last_layer_per_extruder;
     const PrintObject*         m_print_object_ptr = nullptr;
     Print*                     m_print;
     bool                       m_sorted = false;

src/libslic3r/PNGReadWrite.cpp

@@ -211,35 +211,6 @@ bool decode_colored_png(const ReadBuf &in_buf, ImageColorscale &out_img)
     return decode_colored_png(stream, out_img);
 }
 
-bool is_decodable_8bit_png(const ReadBuf &pngbuf)
-{
-    static const constexpr int PNG_SIG_BYTES = 8;
-
-    struct ReadBufStream stream{pngbuf};
-    std::vector<png_byte> sig(PNG_SIG_BYTES, 0);
-    stream.read(sig.data(), PNG_SIG_BYTES);
-    if (!png_check_sig(sig.data(), PNG_SIG_BYTES))
-        return false;
-
-    PNGDescr dsc;
-    dsc.png = png_create_read_struct(PNG_LIBPNG_VER_STRING, nullptr, nullptr, nullptr);
-    if (!dsc.png)
-        return false;
-    dsc.info = png_create_info_struct(dsc.png);
-    if (!dsc.info)
-        return false;
-
-    if (!png_read_header_guarded(dsc.png, dsc.info, &stream, PNG_SIG_BYTES))
-        return false;
-
-    const size_t color_type = png_get_color_type(dsc.png, dsc.info);
-    const size_t bit_depth  = png_get_bit_depth(dsc.png, dsc.info);
-    const bool   grey       = color_type == PNG_COLOR_TYPE_GRAY;
-    const bool   colour     = color_type == PNG_COLOR_TYPE_RGB || color_type == PNG_COLOR_TYPE_RGB_ALPHA;
-    return png_get_image_width(dsc.png, dsc.info) > 0 && png_get_image_height(dsc.png, dsc.info) > 0 &&
-           bit_depth == 8 && (grey || colour);
-}
-
 
 // Down to earth function to store a packed RGB image to file. Mostly useful for debugging purposes.
 // Based on https://www.lemoda.net/c/write-png/

src/libslic3r/PNGReadWrite.hpp

@@ -50,9 +50,6 @@ struct ReadBuf { const void *buf = nullptr; const size_t sz = 0; };
 
 bool is_png(const ReadBuf &pngbuf);
 
-// True if decode_png() or decode_colored_png() would accept these bytes, judged from the header alone.
-bool is_decodable_8bit_png(const ReadBuf &pngbuf);
-
 struct ReadBufStream: public IStream {
     const ReadBuf &rbuf_ref;
     size_t pos = 0;

src/libslic3r/PerimeterGenerator.cpp

@@ -62,12 +62,7 @@ public:
     // Depth in the hierarchy. External perimeter has depth = 0. An external perimeter could be both a contour and a hole.
     unsigned short                      depth;
     // ORCA: an external hole perimeter touching the next outer wall all around, with nothing between them.
-    // E.g. a 1mm tube wall with 0.5mm walls: 2 lines, the contour's outer wall and the hole's.
     bool                                is_thin_wall_hole = false;
-    // ORCA: an external hole perimeter with no room for an inner wall beside it, at most gap fill. Every thin wall
-    // hole is one, and so is e.g. a 1.5mm tube wall with 0.5mm walls: 3 lines, the two outer walls and gap fill
-    // between them. A 2mm tube wall has room for an inner wall a side and is not. Only set for Inner/Outer/Inner.
-    bool                                is_narrow_wall_hole = false;
     // Children contour, may be both CCW and CW oriented (outer contours or holes).
     std::vector<PerimeterGeneratorLoop> children;
 
@@ -577,8 +572,7 @@ static ExtrusionEntityCollection traverse_extrusions(const PerimeterGenerator& p
                 extrusion_coll.append(std::move(extrusion_loop));
                 // Orca: Reverse the order of paths for thin wall holes. We define thin wall hole as a hole with only one perimeter.
                 const bool thin_wall_hole = !pg_extrusion.is_contour && pg_extrusions.size() == 2;
-                if (thin_wall_hole && perimeter_generator.config->wall_sequence != WallSequence::OuterInner &&
-                    !perimeter_generator.outer_walls_first_for_brim())
+                if (thin_wall_hole && perimeter_generator.config->wall_sequence != WallSequence::OuterInner)
                     std::reverse(extrusion_coll.entities.begin(), extrusion_coll.entities.end());
             }
             else {
@@ -1696,24 +1690,13 @@ void PerimeterGenerator::process_classic()
 
                 last = std::move(offsets);
 
-                // ORCA: a thin wall hole has no room for gap fill or an inner wall anywhere beside its outer wall, a
-                // narrow wall hole none for an inner wall, the room the next loop is offset by below.
+                // ORCA: a thin wall hole has no room for gap fill or an inner wall anywhere beside its outer wall.
                 if (i == 0 && ! holes[0].empty()) {
-                    auto reach = [&last](double room) {
-                        return to_polygons(offset2_ex(last, -float(room), float(room) + float(SCALED_EPSILON)));
-                    };
-                    auto out_of_reach = [](const Polygon &hole, const Polygons &reach) {
-                        return intersection_pl(Polylines{ hole.split_at_first_point() },
-                            ClipperUtils::clip_clipper_polygons_with_subject_bbox(reach, get_extents(hole).inflated(SCALED_EPSILON))).empty();
-                    };
-                    // Only Inner/Outer/Inner orders narrow wall holes apart.
-                    const bool     narrow_holes_ordered = this->config->wall_sequence == WallSequence::InnerOuterInner;
-                    const Polygons gap_fill_reach       = reach(0.5 * (ext_perimeter_spacing2 + gap_fill_min_width));
-                    const Polygons inner_wall_reach     = narrow_holes_ordered ? reach(ext_perimeter_spacing2 + min_spacing / 2.) : Polygons();
-                    for (PerimeterGeneratorLoop &hole : holes[0]) {
-                        hole.is_thin_wall_hole   = out_of_reach(hole.polygon, gap_fill_reach);
-                        hole.is_narrow_wall_hole = narrow_holes_ordered && out_of_reach(hole.polygon, inner_wall_reach);
-                    }
+                    const float    room  = float(0.5 * (ext_perimeter_spacing2 + gap_fill_min_width));
+                    const Polygons reach = to_polygons(offset2_ex(last, -room, room + float(SCALED_EPSILON)));
+                    for (PerimeterGeneratorLoop &hole : holes[0])
+                        hole.is_thin_wall_hole = intersection_pl(Polylines{ hole.polygon.split_at_first_point() },
+                            ClipperUtils::clip_clipper_polygons_with_subject_bbox(reach, get_extents(hole.polygon).inflated(SCALED_EPSILON))).empty();
                 }
 
                 //BBS: refer to superslicer
@@ -1852,16 +1835,18 @@ void PerimeterGenerator::process_classic()
 
             // if brim will be printed, reverse the order of perimeters so that
             // we continue inwards after having finished the brim
+            // TODO: add test for perimeter order
             bool is_outer_wall_first = this->config->wall_sequence == WallSequence::OuterInner;
-            // Orca: a contour with only a narrow wall hole beside it has nothing to sandwich, and prints the hole first,
-            // then the contour, then the gap fill between them, as Arachne does.
-            const PerimeterGeneratorLoops &island_loops = contours.front();
-            const bool narrow_wall_hole_island = island_loops.size() == 1 && island_loops.front().children.size() == 1 &&
-                                                 island_loops.front().children.front().is_narrow_wall_hole;
-            if (is_outer_wall_first || this->outer_walls_first_for_brim())
+            if (is_outer_wall_first ||
+                //BBS: always print outer wall first when there indeed has brim.
+                // btLeadingEdgeOnly is an outer brim too (a belt brim at the part's first contact).
+                (this->layer_id == 0 &&
+                    (this->object_config->brim_type == BrimType::btOuterOnly ||
+                     this->object_config->brim_type == BrimType::btLeadingEdgeOnly) &&
+                    this->object_config->brim_width.value > 0))
                 entities.reverse();
             // Orca: sandwich mode. Apply after 1st layer.
-            else if ((this->config->wall_sequence == WallSequence::InnerOuterInner) && layer_id > 0 && !narrow_wall_hole_island){
+            else if ((this->config->wall_sequence == WallSequence::InnerOuterInner) && layer_id > 0){
                 entities.reverse(); // reverse all entities - order them from external to internal
                 if(entities.entities.size()>2){ // 3 walls minimum needed to do inner outer inner ordering
                     int position = 0; // index to run the re-ordering for multiple external perimeters in a single island.
@@ -2427,25 +2412,11 @@ std::vector<PerimeterGeneratorArachneExtrusion> reorderPerimetersByProximity(std
 
     // Function to reorder perimeters starting from a given reference index
     auto reorderFromReference = [&](int referenceIndex) {
-        // Find first level touching perimeters. The odd centre line of a wall too narrow for two inner walls is shared
-        // by the outer walls on both sides, so those join this island and are printed before it too, holes first.
-        std::vector<int> outerIndices{referenceIndex};
-        std::vector<int> firstLevelTouchingIndices;
-        for (size_t next = 0; next < outerIndices.size(); ++next)
-            for (int idx : findAllTouchingPerimeters(entities, {outerIndices[next]}, threshold_external, threshold_internal, 1)) {
-                if (std::find(firstLevelTouchingIndices.begin(), firstLevelTouchingIndices.end(), idx) != firstLevelTouchingIndices.end())
-                    continue;
-                firstLevelTouchingIndices.push_back(idx);
-                if (!entities[idx].extrusion->is_odd)
-                    continue;
-                for (size_t i = 0; i < entities.size(); ++i)
-                    if (entities[i].extrusion->inset_idx == 0 && includedIndices.count(int(i)) == 0 &&
-                        std::find(outerIndices.begin(), outerIndices.end(), int(i)) == outerIndices.end() &&
-                        arachne_lines_touch(*entities[i].extrusion, *entities[idx].extrusion, double(threshold_external)))
-                        outerIndices.push_back(int(i));
-            }
-        std::stable_partition(outerIndices.begin(), outerIndices.end(),
-                              [&entities](int idx) { return entities[idx].extrusion->is_closed && !entities[idx].is_contour; });
+        std::unordered_set<int> firstLevelIndices;
+        firstLevelIndices.insert(referenceIndex);
+
+        // Find first level touching perimeters
+        std::vector<int> firstLevelTouchingIndices = findAllTouchingPerimeters(entities, firstLevelIndices, threshold_external, threshold_internal, 1);
         // Bring the largest first level perimeter to the front
         // The longest first neighbour is most likely the dominant proximate perimeter
         // hence printing it immediately after the external perimeter should speed things up
@@ -2456,10 +2427,8 @@ std::vector<PerimeterGeneratorArachneExtrusion> reorderPerimetersByProximity(std
             std::iter_swap(maxIt, firstLevelTouchingIndices.end() - 1);
         }
         // Insert first level perimeters into reordered list
-        for (int idx : outerIndices) {
-            reordered.push_back(entities[idx]);
-            includedIndices.insert(idx);
-        }
+        reordered.push_back(entities[referenceIndex]);
+        includedIndices.insert(referenceIndex);
 
         for (int idx : firstLevelTouchingIndices) {
             if (includedIndices.count(idx) == 0) {
@@ -2788,7 +2757,7 @@ void PerimeterGenerator::process_arachne()
         
         if (layer_id == 0){ // disable inner outer inner algorithm after the first layer
         	is_outer_wall_first =
-            	this->config->wall_sequence == WallSequence::OuterInner || this->outer_walls_first_for_brim();
+            	this->config->wall_sequence == WallSequence::OuterInner;
         }
         if (is_outer_wall_first) {
             start_perimeter = 0;
@@ -3073,16 +3042,6 @@ ExPolygons PerimeterGenerator::printable_slices(const ExPolygons &slices) const
     return min_width > EPSILON ? opening_ex(slices, float(scale_(min_width / 2.))) : slices;
 }
 
-bool PerimeterGenerator::outer_walls_first_for_brim() const
-{
-    return layer_id == 0 && brim_puts_outer_walls_first(object_config->brim_type.value, object_config->brim_width.value);
-}
-
-bool brim_puts_outer_walls_first(BrimType brim_type, double brim_width)
-{
-    return brim_width > 0 && (brim_type == btOuterOnly || brim_type == btOuterAndInner || brim_type == btLeadingEdgeOnly);
-}
-
 std::vector<Polygons> PerimeterGenerator::generate_lower_polygons_series(float width)
 {
     float nozzle_diameter = print_config->nozzle_diameter.get_at(config->outer_wall_filament_id - 1);

src/libslic3r/PerimeterGenerator.hpp

@@ -164,8 +164,6 @@ public:
     Polygons    lower_slices_polygons() const { return m_lower_slices_polygons; }
     // ORCA: the slices less the slivers the wall generator prints nothing for, so they never count as support.
     ExPolygons  printable_slices(const ExPolygons &slices) const;
-    // ORCA: whether this layer prints its outer walls first for the brim, see brim_puts_outer_walls_first().
-    bool        outer_walls_first_for_brim() const;
 
 private:
     std::vector<Polygons>     generate_lower_polygons_series(float width);
@@ -185,10 +183,6 @@ private:
     Polygons    m_lower_slices_polygons;
 };
 
-// ORCA: a brim against the outer walls makes the first layer print them first, whatever the wall sequence, so the
-// brim runs straight on into the outer wall. Auto, ear and painted brims may leave the outer walls bare.
-bool brim_puts_outer_walls_first(BrimType brim_type, double brim_width);
-
 }
 
 #endif

src/libslic3r/Preset.cpp

@@ -2293,7 +2293,6 @@ void PresetCollection::load_project_embedded_presets(std::vector<Preset*>& proje
                 BOOST_LOG_TRIVIAL(error) << boost::format("can not find parent for config %1%!")%preset->file;
                 continue;
             }
-            extend_default_config_length(config, false, {});
             preset->config.update_diff_values_to_child_config(config, extruder_id_name, extruder_variant_name, *key_set1, *key_set2);
             //preset->config.apply(std::move(config));
             Preset::normalize(preset->config);

src/libslic3r/PrintObject.cpp

@@ -17,7 +17,6 @@
 #include "I18N.hpp"
 #include "Layer.hpp"
 #include "MutablePolygon.hpp"
-#include "PerimeterGenerator.hpp"
 #include "PrintBase.hpp"
 #include "PrintConfig.hpp"
 #include "SLA/IndexedMesh.hpp"
@@ -859,10 +858,11 @@ void PrintObject::contour_z()
     BOOST_LOG_TRIVIAL(debug) << "Contouring in parallel - start";
 
     TriangleMesh mesh = this->m_model_object->raw_mesh();
-    // A PrintObject groups the instances that share their whole transformation but the XY shift: an
-    // instance rotated, scaled or mirrored differently is a PrintObject of its own. So the first
-    // instance stands for all of them.
-    const ModelInstance *inst = m_instances.front().model_instance;
+    if (m_model_object->instances.size() != 1) {
+        throw RuntimeError("ContourZ: unexpected number of instances");
+    }
+
+    ModelInstance *inst = m_model_object->instances.front();
     Point                    center_offset = this->center_offset();
     Geometry::Transformation trans = inst->get_transformation();
 
@@ -1465,13 +1465,15 @@ bool PrintObject::invalidate_state_by_config_options(
             || opt_key == "top_surface_speed") {
             // Brim is printed below supports, support invalidates brim and skirt.
             steps.emplace_back(posSupportMaterial);
-            if (opt_key == "brim_type" || opt_key == "brim_width") {
-                // Regenerate the walls when the brim starts or stops putting the first layer's outer walls first.
-                auto outer_walls_first = [](const ConfigOptionResolver &config) {
-                    return brim_puts_outer_walls_first(config.option<ConfigOptionEnum<BrimType>>("brim_type")->value,
-                                                       config.option<ConfigOptionFloat>("brim_width")->value);
-                };
-                if (outer_walls_first(old_config) != outer_walls_first(new_config))
+            if (opt_key == "brim_type") {
+                const auto* old_brim_type = old_config.option<ConfigOptionEnum<BrimType>>(opt_key);
+                const auto* new_brim_type = new_config.option<ConfigOptionEnum<BrimType>>(opt_key);
+                //BBS: When switch to manual brim, the object must have brim, then re-generate perimeter
+                //to make the wall order of first layer to be outer-first
+                // btLeadingEdgeOnly is printed as an outer brim (Brim.cpp, BeltBrim.cpp), so it
+                // takes part in the same first-layer wall order rule.
+                if (old_brim_type->value == btOuterOnly || new_brim_type->value == btOuterOnly ||
+                    old_brim_type->value == btLeadingEdgeOnly || new_brim_type->value == btLeadingEdgeOnly)
                     steps.emplace_back(posPerimeters);
             }
         } else if (

src/libslic3r/Support/SupportCommon.cpp

@@ -707,10 +707,8 @@ void tree_supports_generate_paths(
                                             false);
         }
         if (eec) {
-            if (!eec->empty()) {
-                std::reverse(eec->entities.begin(), eec->entities.end());
-                dst.emplace_back(eec.release());
-            }
+            std::reverse(eec->entities.begin(), eec->entities.end());
+            dst.emplace_back(eec.release());
         }
     }
 }
@@ -1827,7 +1825,12 @@ void generate_support_toolpaths(
                     no_sort = true;
                 } else if (support_params.support_style == SupportMaterialStyle::smsTreeOrganic &&
                            (config.support_base_pattern == smpNone || config.support_base_pattern == smpDefault)) {
-                    tree_supports_generate_paths(base_layer.extrusions, base_layer.polygons_to_extrude(), flow, support_params);
+                    // Orca: A special case for the hollow Organic supports
+                    // Orca: If the tree supports are too tall, use a double wall to make it stronger
+                    SupportParameters support_params2 = support_params;
+                    if (support_layer.print_z > 100.0)
+                        support_params2.tree_branch_diameter_double_wall_area_scaled = 0.1;
+                    tree_supports_generate_paths(base_layer.extrusions, base_layer.polygons_to_extrude(), flow, support_params2);
                     done = true;
                 }
                 if (! done)

src/libslic3r/Support/TreeSupport.cpp

@@ -2149,9 +2149,7 @@ void TreeSupport::draw_circles()
     const bool with_lightning_infill = m_support_params.base_fill_pattern == ipLightning;
     coordf_t support_extrusion_width = m_support_params.support_extrusion_width;
     const float tree_brim_width = config.tree_support_brim_width.value;
-    // Reinforce branches moving more than half a support-line width between layers.
-    // Square the threshold for comparison with the squared XY movement below.
-    const double max_move_sq = sqr(double(scale_(m_object_config->support_line_width / 2)));
+
     // Belt floor: the first object layer is not on a flat bed — it rests on the
     // tilted, moving belt. So the first-object-layer adhesion features (the tree
     // support brim, the hybrid first-layer base expansion) must be suppressed:
@@ -2203,7 +2201,7 @@ void TreeSupport::draw_circles()
                 size_t           first_base_roof_area = 0;
                 bool             floor_interface_as_base = false;
                 bool has_circle_node = false;
-                ExPolygons extra_wall_areas;
+                bool need_extra_wall = false;
                 ExPolygons collision_sharp_tails;
                 ExPolygons collision_base;
                 auto             get_collision = [&](bool sharp_tail) -> ExPolygons             &{
@@ -2281,6 +2279,7 @@ void TreeSupport::draw_circles()
                         // area = diff_clipped({ ExPolygon(circle) }, get_collision(node.is_sharp_tail && node.distance_to_top <= 0));
 
                         if (!area.empty()) has_circle_node = true;
+                        if (node.need_extra_wall) need_extra_wall = true;
 
                         // merge overhang to get a smoother interface surface
                         // Do not merge when buildplate_only is on, because some underneath nodes may have been deleted.
@@ -2295,10 +2294,6 @@ void TreeSupport::draw_circles()
                         }
                     }
 
-                    // Use the Pythagorean theorem to compare movement magnitude (dx² + dy²) without a square root.
-                    if (node.is_processed && node.movement.cast<double>().squaredNorm() > max_move_sq)
-                        append(extra_wall_areas, area);
-
                     if (obj_layer_nr>0 && node.distance_to_top < 0)
                         append(roof_gap_areas, area);
                     else if (obj_layer_nr > 0 && node.support_roof_layers_below == 1 &&
@@ -2535,8 +2530,7 @@ void TreeSupport::draw_circles()
                     //if (area(expoly) < SQ(scale_(1))) continue;
                     area_groups.emplace_back(&expoly, SupportLayer::BaseType, max_layers_above_base);
                     area_groups.back().need_infill = overlaps({ expoly }, area_poly);
-                    area_groups.back().need_extra_wall = !area_groups.back().need_infill &&
-                        !extra_wall_areas.empty() && overlaps({expoly}, extra_wall_areas);
+                    area_groups.back().need_extra_wall = need_extra_wall && !area_groups.back().need_infill;
                 }
                 for (size_t roof_idx = 0; roof_idx < ts_layer->roof_areas.size(); ++roof_idx) {
                     auto &expoly = ts_layer->roof_areas[roof_idx];
@@ -3439,6 +3433,11 @@ void TreeSupport::smooth_nodes()
         }
     }
     
+    float max_move = scale_(m_object_config->support_line_width / 2);
+    // if the branch is very tall, the tip also needs extra wall
+    float thresh_tall_branch = 100;
+    float thresh_dist_to_top = 30;
+
     for (int layer_nr = 0; layer_nr< contact_nodes.size(); layer_nr++) {
         std::vector<SupportNode *> &curr_layer_nodes = contact_nodes[layer_nr];
         if (curr_layer_nodes.empty()) continue;
@@ -3448,17 +3447,20 @@ void TreeSupport::smooth_nodes()
                 std::vector<double> radii;
                 std::vector<SupportNode *>   branch;
                 SupportNode *              p_node = node;
+                float                        total_height = 0;
                 // add a fixed head if it's not a polygon node, see STUDIO-4403
                 // Polygon node can't be added because the move distance might be huge, making the nodes in between jump and dangling
                 if (node->child && node->child->type!=ePolygon) {
                     pts.push_back(p_node->child->position);
                     radii.push_back(p_node->child->radius);
                     branch.push_back(p_node->child);
+                    total_height += p_node->child->height;
                 }
                 do {
                     pts.push_back(p_node->position);
                     radii.push_back(p_node->radius);
                     branch.push_back(p_node);
+                    total_height += p_node->height;
                     p_node = p_node->parent;
                 } while (p_node && !p_node->is_processed);
                 if (pts.size() < 3) continue;
@@ -3477,6 +3479,9 @@ void TreeSupport::smooth_nodes()
                             branch[i]->radius = radii1[i];
                             branch[i]->movement = (pts[i + 1] - pts[i - 1]) / 2;
                             branch[i]->is_processed = true;
+                            if (branch[i]->parents.size() > 1 || (branch[i]->movement.x() > max_move || branch[i]->movement.y() > max_move) ||
+                                (total_height > thresh_tall_branch && branch[i]->dist_mm_to_top < thresh_dist_to_top))
+                                branch[i]->need_extra_wall = true;
                             BOOST_LOG_TRIVIAL(info) << "smooth_nodes: layer_nr=" << layer_nr << ", i=" << i << ", pt=" << pt << ", movement=" << branch[i]->movement << ", radius=" << branch[i]->radius;
                         }
                     }
@@ -3484,6 +3489,13 @@ void TreeSupport::smooth_nodes()
                         std::swap(pts, pts1);
                         std::swap(radii, radii1);
                     }
+                    else {
+                        // interpolate need_extra_wall in the end
+                        for (size_t i = 1; i < branch.size() - 1; i++) {
+                            if (branch[i - 1]->need_extra_wall && branch[i + 1]->need_extra_wall)
+                                branch[i]->need_extra_wall = true;
+                        }
+                    }
                 }
             }
         }

src/libslic3r/Support/TreeSupport.hpp

@@ -135,6 +135,7 @@ struct SupportNode
     TreeNodeType   type            = eCircle;
     bool           is_corner       = false;
     bool           is_processed    = false;
+    bool           need_extra_wall = false;
     bool           is_sharp_tail   = false;
     bool           valid = true;
     ExPolygon      overhang; // when type==ePolygon, set this value to get original overhang area

src/libslic3r/TextureDisplacement.cpp

@@ -283,7 +283,7 @@ bool height_texture_has_color(const TextureDisplacementLayer &layer)
     return decode_height_texture(layer).has_color();
 }
 
-DecodedHeightTexture decode_height_texture(const TextureDisplacementLayer &layer, bool keep_decoded)
+DecodedHeightTexture decode_height_texture(const TextureDisplacementLayer &layer)
 {
     DecodedHeightTexture result;
     if (layer.empty())
@@ -351,15 +351,13 @@ DecodedHeightTexture decode_height_texture(const TextureDisplacementLayer &layer
                 }
         }
 
-        if (keep_decoded) {
-            std::lock_guard<std::mutex> lock(g_decoded_texture_cache.mutex);
-            // Opportunistically drop entries for image_data that no longer exists anywhere, so the
-            // cache doesn't grow without bound across many add/remove-texture cycles in a long session.
-            auto &entries = g_decoded_texture_cache.entries;
-            for (auto it = entries.begin(); it != entries.end();)
-                it = it->second.first.expired() ? entries.erase(it) : std::next(it);
-            entries[key] = { std::weak_ptr<const std::vector<unsigned char>>(layer.image_data), result };
-        }
+        std::lock_guard<std::mutex> lock(g_decoded_texture_cache.mutex);
+        // Opportunistically drop entries for image_data that no longer exists anywhere, so the
+        // cache doesn't grow without bound across many add/remove-texture cycles in a long session.
+        auto &entries = g_decoded_texture_cache.entries;
+        for (auto it = entries.begin(); it != entries.end();)
+            it = it->second.first.expired() ? entries.erase(it) : std::next(it);
+        entries[key] = { std::weak_ptr<const std::vector<unsigned char>>(layer.image_data), result };
     }
 
     // The image-adjustment panel's live edits, on top of the decode and before the smoothing. Before,

src/libslic3r/TextureDisplacement.hpp

@@ -599,9 +599,8 @@ DecodedHeightTexture downscale_height_texture(const DecodedHeightTexture &src, i
 // colour PNGs are accepted; for a colour source the height is its luminance, using the same
 // coefficients wxImage::ConvertToGreyscale() uses, so a texture imported as colour displaces exactly
 // as it did when the importer flattened it to grey on the way in. Returns an empty
-// DecodedHeightTexture if image_data is empty or is not a PNG at all. keep_decoded = false leaves the
-// result out of the decode cache, for one-off reads such as a picker thumbnail that must not hold full-size pixels.
-DecodedHeightTexture decode_height_texture(const TextureDisplacementLayer &layer, bool keep_decoded = true);
+// DecodedHeightTexture if image_data is empty or is not a PNG at all.
+DecodedHeightTexture decode_height_texture(const TextureDisplacementLayer &layer);
 
 // decode_height_texture(layer).has_color(), answered from the decode cache rather than from a copy of the
 // texture - cheap enough to ask every frame. Smoothing does not change it, so the raw decode is what is read.

src/libslic3r/Utils.hpp

@@ -842,13 +842,6 @@ void load_string_file(const boost::filesystem::path& p, std::string& str);
 
 bool check_layer_id_pattern(const std::string& pattern, int layer_id);
 
-// On Windows, return an equivalent path carrying the extended-length ("\\?\" / "\\?\UNC\")
-// prefix so the Win32 APIs accept it past MAX_PATH even when LongPathsEnabled is off. The path
-// is made absolute and lexically normalized first, because the prefix disables normalisation.
-// A path that is already extended (or a device path) is returned unchanged; on other platforms,
-// or when an absolute path cannot be formed, the input is returned unchanged.
-boost::filesystem::path extended_path(const boost::filesystem::path& path);
-
 } // namespace Slic3r
 
 #if WIN32

src/libslic3r/miniz_extension.cpp

@@ -17,7 +17,6 @@
 
 #if defined(_MSC_VER) || defined(__MINGW64__)
 #include "boost/nowide/cstdio.hpp"
-#include "boost/nowide/convert.hpp"
 #endif
 
 #include "I18N.hpp"
@@ -63,11 +62,7 @@ bool open_zip(mz_zip_archive *zip, const char *fname, bool isread)
 
     FILE *f = nullptr;
 #if defined(_MSC_VER) || defined(__MINGW64__)
-    // fname is UTF-8 (the nowide contract). Route it through the shared extended-path helper so an
-    // archive stored past MAX_PATH opens even with LongPathsEnabled off.
-    const std::wstring wide_path = boost::nowide::widen(fname);
-    const std::string  extended  = boost::nowide::narrow(Slic3r::extended_path(boost::filesystem::path(wide_path)).wstring());
-    f = boost::nowide::fopen(extended.c_str(), mode);
+    f = boost::nowide::fopen(fname, mode);
 #elif defined(__GNUC__) && defined(_LARGEFILE64_SOURCE)
     f = fopen64(fname, mode);
 #else
@@ -106,14 +101,6 @@ bool close_zip(mz_zip_archive *zip, bool isread)
     }
     return ret;
 }
-
-#ifdef WIN32
-// mz_file_write_func writing an extracted entry into an already-open FILE*.
-size_t mz_write_to_cfile(void *opaque, mz_uint64 /*file_ofs*/, const void *buffer, size_t size)
-{
-    return std::fwrite(buffer, 1, size, static_cast<FILE *>(opaque));
-}
-#endif
 }
 
 bool open_zip_reader(mz_zip_archive *zip, const std::string &fname)
@@ -129,36 +116,6 @@ bool open_zip_writer(mz_zip_archive *zip, const std::string &fname)
 bool close_zip_reader(mz_zip_archive *zip) { return close_zip(zip, true); }
 bool close_zip_writer(mz_zip_archive *zip) { return close_zip(zip, false); }
 
-bool extract_zip_entry_to_file(mz_zip_archive *zip, mz_uint file_index, const boost::filesystem::path &dest_path)
-{
-    if (!zip)
-        return false;
-#ifdef WIN32
-    // Open the destination ourselves with a Windows extended-length path: miniz's narrow
-    // extract_to_file cannot be relied on past MAX_PATH with LongPathsEnabled off, and its wide
-    // variant takes a plain (unprefixed) path and a text-mode stream. This keeps the write binary.
-    FILE *file = ::_wfopen(Slic3r::extended_path(dest_path).wstring().c_str(), L"wb");
-    if (!file) {
-        zip->m_last_error = MZ_ZIP_FILE_OPEN_FAILED;
-        return false;
-    }
-
-    const bool written = mz_zip_reader_extract_to_callback(zip, file_index, mz_write_to_cfile, file, 0) != 0;
-    const bool closed  = std::fclose(file) == 0;
-    if (!written || !closed) {
-        if (written && !closed)
-            zip->m_last_error = MZ_ZIP_FILE_CLOSE_FAILED;
-        // Drop the partial entry rather than leave a truncated file behind.
-        boost::system::error_code ec;
-        boost::filesystem::remove(Slic3r::extended_path(dest_path), ec);
-        return false;
-    }
-    return true;
-#else
-    return mz_zip_reader_extract_to_file(zip, file_index, dest_path.string().c_str(), 0) != 0;
-#endif
-}
-
 std::string decode_archive_entry_path(mz_zip_archive *zip, const mz_zip_archive_file_stat &stat)
 {
     if (stat.m_is_utf8)
@@ -199,13 +156,10 @@ bool extract_archive_confined(const std::string &zip_path_utf8, const std::strin
         }
         const std::string dest_file = dest_dir + "/" + stat.m_filename;
         try {
-            // Use the extended-length form for every filesystem call so entries under a destination
-            // past MAX_PATH are created even with LongPathsEnabled off.
-            const boost::filesystem::path dest_path(dest_file);
-            const boost::filesystem::path io_dest = extended_path(dest_path);
             if (stat.m_is_directory) {
-                if (!boost::filesystem::exists(io_dest))
-                    boost::filesystem::create_directories(io_dest);
+                const boost::filesystem::path dest_path(dest_file);
+                if (!boost::filesystem::exists(dest_path))
+                    boost::filesystem::create_directories(dest_path);
                 continue;
             }
             if (stat.m_uncomp_size == 0) {
@@ -213,9 +167,10 @@ bool extract_archive_confined(const std::string &zip_path_utf8, const std::strin
                 continue;
             }
             // Replace a symlink at the destination rather than writing through it.
-            if (boost::filesystem::is_symlink(boost::filesystem::symlink_status(io_dest)))
-                boost::filesystem::remove(io_dest);
-            if (!extract_zip_entry_to_file(&archive, stat.m_file_index, dest_path)) {
+            const boost::filesystem::path dest_path(dest_file);
+            if (boost::filesystem::is_symlink(boost::filesystem::symlink_status(dest_path)))
+                boost::filesystem::remove(dest_path);
+            if (!mz_zip_reader_extract_to_file(&archive, stat.m_file_index, dest_file.c_str(), 0)) {
                 BOOST_LOG_TRIVIAL(error) << "Unzip: extract file " << stat.m_filename << " to dest " << dest_file << " failed";
                 close_zip_reader(&archive);
                 return false;

src/libslic3r/miniz_extension.hpp

@@ -1,7 +1,6 @@
 #ifndef MINIZ_EXTENSION_HPP
 #define MINIZ_EXTENSION_HPP
 
-#include <boost/filesystem/path.hpp>
 #include <string>
 #include <miniz.h>
 
@@ -14,10 +13,6 @@ bool close_zip_writer(mz_zip_archive *zip);
 std::string decode_archive_entry_path(mz_zip_archive *zip, const mz_zip_archive_file_stat &stat);
 // Extracts every entry of the archive under dest_dir. Nothing is written if any entry would resolve outside dest_dir.
 bool extract_archive_confined(const std::string &zip_path_utf8, const std::string &dest_dir);
-// Extracts one entry into dest_path, binary-safe and overwriting. On Windows the destination is
-// opened through an extended-length path so it works past MAX_PATH even with LongPathsEnabled off;
-// a partial file is removed if the write fails. False for a directory/unsupported entry or on error.
-bool extract_zip_entry_to_file(mz_zip_archive *zip, mz_uint file_index, const boost::filesystem::path &dest_path);
 
 class MZ_Archive {
 public:

src/libslic3r/utils.cpp

@@ -2254,45 +2254,5 @@ bool check_layer_id_pattern(const std::string& pattern, int layer_id){
     return mod >= 0 && mod < count;
 }
 
-boost::filesystem::path extended_path(const boost::filesystem::path& path) {
-#ifdef WIN32
-    namespace fs = boost::filesystem;
-
-    // Already extended, or an explicit device path (which is not subject to MAX_PATH and must not
-    // be absolutized or normalized): leave it alone.
-    {
-        fs::path prefix_candidate = path;
-        const std::wstring native = prefix_candidate.make_preferred().wstring();
-        if (native.rfind(L"\\\\?\\", 0) == 0 || native.rfind(L"\\\\.\\", 0) == 0)
-            return fs::path(native);
-    }
-
-    fs::path absolute = path;
-    if (!absolute.is_absolute()) {
-        boost::system::error_code ec;
-        absolute = fs::absolute(absolute, ec);
-        if (ec)
-            return path; // can't form a valid prefixed path from a relative one
-    }
-
-    // A trailing separator is redundant to the Win32 APIs, but lexically_normal() would rewrite it
-    // as a "." element, which the "\\?\" prefix (normalisation off) takes literally. Drop it first.
-    while (absolute.has_relative_path() && absolute.filename() == ".")
-        absolute = absolute.parent_path();
-
-    // The "\\?\" prefix turns off Win32 normalisation, so do it here first.
-    absolute = absolute.lexically_normal();
-
-    // Extended paths only recognize backslash separators.
-    const std::wstring native = absolute.make_preferred().wstring();
-    if (native.empty())
-        return path;
-    if (native.rfind(L"\\\\", 0) == 0)
-        return fs::path(L"\\\\?\\UNC\\" + native.substr(2)); // \\server\share\... -> \\?\UNC\server\share\...
-    return fs::path(L"\\\\?\\" + native);                    // C:\dir\... -> \\?\C:\dir\...
-#else
-    return path;
-#endif
-}
 
 }; // namespace Slic3r

src/libvgcode/src/Layers.cpp

@@ -75,7 +75,7 @@ std::vector<float> Layers::get_zs() const
 
 size_t Layers::get_layer_id_at(float z) const
 {
-    auto iter = std::upper_bound(m_items.begin(), m_items.end(), z, [](float z, const Item& item) { return item.z > z; });
+    auto iter = std::upper_bound(m_items.begin(), m_items.end(), z, [](float z, const Item& item) { return item.z < z; });
     return std::distance(m_items.begin(), iter);
 }
 

src/slic3r/CMakeLists.txt

@@ -222,7 +222,6 @@ set(SLIC3R_GUI_SOURCES
     GUI/Gizmos/GLGizmoUtils.hpp
     GUI/GLCanvas3D.cpp
     GUI/GLCanvas3D.hpp
-    GUI/SequentialPrintClearance.hpp
     GUI/GLModel.cpp
     GUI/GLModel.hpp
     GUI/GLSelectionRectangle.cpp
@@ -690,8 +689,6 @@ set(SLIC3R_GUI_SOURCES
     plugin/host/PluginHostUi.hpp
     plugin/host/PluginPages.cpp
     plugin/host/PluginPages.hpp
-    plugin/host/PluginResourceTextures.cpp
-    plugin/host/PluginResourceTextures.hpp
     plugin/CloudPluginService.cpp
     plugin/CloudPluginService.hpp
     plugin/PluginFsUtils.cpp
@@ -715,9 +712,6 @@ set(SLIC3R_GUI_SOURCES
     plugin/pluginTypes/pages/PagesPluginCapability.hpp
     plugin/pluginTypes/pages/PagesPluginCapability.cpp
     plugin/pluginTypes/pages/PagesPluginCapabilityTrampoline.hpp
-    plugin/pluginTypes/resourceTexture/ResourceTexturePluginCapability.hpp
-    plugin/pluginTypes/resourceTexture/ResourceTexturePluginCapability.cpp
-    plugin/pluginTypes/resourceTexture/ResourceTexturePluginCapabilityTrampoline.hpp
     plugin/pluginTypes/script/ScriptPluginCapability.hpp
     plugin/pluginTypes/script/ScriptPluginCapability.cpp
     plugin/pluginTypes/script/ScriptPluginCapabilityTrampoline.hpp

src/slic3r/GUI/AMSMaterialsSetting.cpp

@@ -85,96 +85,6 @@ static std::string float_to_string_with_precision(float value, int precision = 3
     return stream.str();
 }
 
-static std::string colour_to_ams_string(const wxColour& color)
-{
-    char col_buf[10];
-    sprintf(col_buf, "%02X%02X%02X%02X", (int)color.Red(), (int)color.Green(), (int)color.Blue(), (int)color.Alpha());
-    return col_buf;
-}
-
-static wxColour mix_colour(const wxColour& left, const wxColour& right, double ratio)
-{
-    ratio = std::max(0.0, std::min(1.0, ratio));
-    auto mix_channel = [ratio](unsigned char l, unsigned char r) {
-        return static_cast<unsigned char>(std::round(l + (r - l) * ratio));
-    };
-    return wxColour(mix_channel(left.Red(), right.Red()),
-                    mix_channel(left.Green(), right.Green()),
-                    mix_channel(left.Blue(), right.Blue()),
-                    mix_channel(left.Alpha(), right.Alpha()));
-}
-
-static std::vector<ColorPickerPopup::ColorItem> collect_ams_color_items(DevFilaSystem* fila_system)
-{
-    std::vector<ColorPickerPopup::ColorItem> items;
-    if (!fila_system) return items;
-
-    for (const auto& ams_pair : fila_system->GetAmsList()) {
-        DevAms* ams = ams_pair.second;
-        if (!ams) continue;
-
-        for (const auto& tray_pair : ams->GetTrays()) {
-            DevAmsTray* tray = tray_pair.second;
-            if (!tray || !tray->is_tray_info_ready()) continue;
-
-            ColorPickerPopup::ColorItem item;
-            for (const std::string& col : tray->cols) {
-                item.colors.emplace_back(DevAmsTray::decode_color(col));
-            }
-            if (item.colors.empty() && !tray->color.empty()) {
-                item.colors.emplace_back(DevAmsTray::decode_color(tray->color));
-            }
-            if (item.colors.empty()) continue;
-
-            item.ctype = item.colors.size() > 1 ? tray->ctype : 2;
-            items.emplace_back(std::move(item));
-        }
-    }
-
-    return items;
-}
-
-static std::vector<ColorPickerPopup::ColorItem> collect_preset_color_items(const std::string& filament_id)
-{
-    std::vector<ColorPickerPopup::ColorItem> items;
-    if (filament_id.empty()) return items;
-
-    auto* clr_query = GUI::wxGetApp().get_filament_color_code_query();
-    if (!clr_query) return items;
-
-    auto* agent = wxGetApp().getAgent();
-    const std::string catalog_id = agent ? agent->from_orca_filament_id(filament_id) : filament_id;
-    FilamentColorCodes* color_codes = clr_query->GetFilaInfoMap(wxString::FromUTF8(catalog_id));
-    if (!color_codes || !color_codes->GetFilamentColor2CodeMap()) return items;
-
-    std::set<std::string> seen;
-    for (const auto& color_pair : *color_codes->GetFilamentColor2CodeMap()) {
-        const FilamentColor& fila_color = color_pair.first;
-        FilamentColorCode* color_code = color_pair.second;
-        if (!color_code || fila_color.GetColors().empty()) continue;
-
-        ColorPickerPopup::ColorItem item;
-        item.ctype = fila_color.ColorCount() < 2 ? 2 :
-            (fila_color.m_color_type == FilamentColor::ColorType::GRADIENT_CLR ? 0 : 1);
-        item.name = color_code->GetFilaColorName();
-
-        std::string key = std::to_string(item.ctype);
-        for (const wxColour& color : fila_color.GetColors()) {
-            item.colors.emplace_back(color);
-            char rgba[9];
-            std::snprintf(rgba, sizeof(rgba), "%02X%02X%02X%02X",
-                static_cast<unsigned>(color.Red()), static_cast<unsigned>(color.Green()),
-                static_cast<unsigned>(color.Blue()), static_cast<unsigned>(color.Alpha()));
-            key += "|" + std::string(rgba);
-        }
-
-        if (item.colors.empty() || !seen.insert(key).second) continue;
-        items.emplace_back(std::move(item));
-    }
-
-    return items;
-}
-
 AMSMaterialsSetting::AMSMaterialsSetting(wxWindow *parent, wxWindowID id)
     : DPIDialog(parent, id, _L("AMS Materials Setting"), wxDefaultPosition, wxDefaultSize, wxCAPTION | wxCLOSE_BOX)
     , m_color_picker_popup(ColorPickerPopup(this))
@@ -830,19 +740,8 @@ void AMSMaterialsSetting::on_select_ok(wxCommandEvent &event)
     nozzle_temp_min.ToLong(&nozzle_temp_min_int);
     nozzle_temp_max.ToLong(&nozzle_temp_max_int);
     wxColour color = m_clr_picker->m_colour;
-    std::string tray_color = colour_to_ams_string(color);
-    std::vector<std::string> tray_colors;
-    int tray_ctype = 2;
-    // Only firmware advertising fun2[23] receives the manual multi-color fields.
-    if (obj->is_support_filament_manual_multi_color) {
-        for (const wxColour& selected_color : m_clr_picker->m_cols) {
-            tray_colors.emplace_back(colour_to_ams_string(selected_color));
-        }
-        if (tray_colors.empty()) {
-            tray_colors.emplace_back(tray_color);
-        }
-        tray_ctype = tray_colors.size() > 1 ? m_clr_picker->ctype : 2;
-    }
+    char col_buf[10];
+    sprintf(col_buf, "%02X%02X%02X%02X", (int)color.Red(), (int)color.Green(), (int)color.Blue(), (int)color.Alpha());
 
     if (ams_filament_id.empty() || nozzle_temp_min.empty() || nozzle_temp_max.empty() || m_filament_type.empty()) {
         BOOST_LOG_TRIVIAL(trace) << "Invalid Setting id";
@@ -861,33 +760,13 @@ void AMSMaterialsSetting::on_select_ok(wxCommandEvent &event)
                             << ", tray_info_idx (filament_id) = " << ams_filament_id
                             << ", setting_id = " << ams_setting_id
                             << ", tray_type = " << m_filament_type
-                            << ", tray_color = " << tray_color
+                            << ", tray_color = " << col_buf
                             << ", nozzle_temp_min = " << nozzle_temp_min_int
                             << ", nozzle_temp_max = " << nozzle_temp_max_int;
 
     // set filament
     if (m_is_third) {
-        obj->command_ams_filament_settings(ams_id, slot_id, ams_filament_id, ams_setting_id, tray_color, m_filament_type, nozzle_temp_min_int, nozzle_temp_max_int,
-                                           tray_colors, tray_ctype);
-
-        // Refresh the edited tray immediately while its MQTT acknowledgement is pending.
-        DevAmsTray* tray = nullptr;
-        if (is_virtual_tray()) {
-            for (auto& virtual_tray : obj->vt_slot) {
-                if (virtual_tray.id == std::to_string(ams_id)) {
-                    tray = &virtual_tray;
-                    break;
-                }
-            }
-        } else {
-            tray = obj->GetFilaSystem()->GetAmsTray(std::to_string(ams_id), std::to_string(slot_id));
-        }
-        if (tray) {
-            tray->color = tray_color;
-            tray->cols = tray_colors;
-            tray->ctype = tray_ctype;
-            tray->set_hold_count();
-        }
+        obj->command_ams_filament_settings(ams_id, slot_id, ams_filament_id, ams_setting_id, std::string(col_buf), m_filament_type, nozzle_temp_min_int, nozzle_temp_max_int);
     }
 
     //reset param
@@ -1044,15 +923,8 @@ void AMSMaterialsSetting::set_ctype(int ctype)
 
 void AMSMaterialsSetting::on_picker_color(wxCommandEvent& event)
 {
-    std::vector<wxColour> colors = m_color_picker_popup.get_selected_colours();
-    if (colors.empty()) {
-        unsigned int color_num = event.GetInt();
-        colors.emplace_back(color_num >> 24 & 0xFF, color_num >> 16 & 0xFF, color_num >> 8 & 0xFF, color_num & 0xFF);
-    }
-
-    set_ctype(m_color_picker_popup.get_selected_ctype());
-    set_color(colors.front());
-    set_colors(colors);
+    unsigned int color_num  = event.GetInt();
+    set_color(wxColour(color_num>>24&0xFF, color_num>>16&0xFF, color_num>>8&0xFF, color_num&0xFF));
 }
 
 void AMSMaterialsSetting::on_clr_picker(wxMouseEvent &event)
@@ -1067,12 +939,14 @@ void AMSMaterialsSetting::on_clr_picker(wxMouseEvent &event)
         }
     }
 
-    m_color_picker_popup.set_ams_colours(collect_ams_color_items(obj->GetFilaSystem().get()));
-    m_color_picker_popup.set_preset_colours(collect_preset_color_items(ams_filament_id));
-    m_color_picker_popup.set_def_colour(m_clr_picker->m_colour, m_clr_picker->m_cols, m_clr_picker->ctype);
+    std::vector<wxColour> ams_colors;
+    obj->GetFilaSystem()->CollectAmsColors(ams_colors);
+
     wxPoint img_pos = m_clr_picker->ClientToScreen(wxPoint(0, 0));
     wxPoint popup_pos(img_pos.x - m_color_picker_popup.GetSize().x - FromDIP(95), img_pos.y - FromDIP(65));
     m_color_picker_popup.Position(popup_pos, wxSize(0, 0));
+    m_color_picker_popup.set_ams_colours(ams_colors);
+    m_color_picker_popup.set_def_colour(m_clr_picker->m_colour);
     m_color_picker_popup.Popup();
 }
 
@@ -1861,46 +1735,7 @@ void ColorPicker::doRender(wxDC& dc)
     auto radius = m_show_full ? size.x / 2 - FromDIP(1) : size.x / 2;
     if (m_selected) radius -= FromDIP(1);
 
-    if (m_show_full && m_cols.size() > 1) {
-        if (ctype == 0) {
-            const double center_x = size.x / 2.0;
-            const double center_y = size.y / 2.0;
-            const double draw_radius = radius;
-            dc.SetPen(*wxTRANSPARENT_PEN);
-            for (int x = 0; x < size.x; ++x) {
-                const double dx = x + 0.5 - center_x;
-                if (std::abs(dx) > draw_radius) continue;
-
-                const double half_height = std::sqrt(std::max(0.0, draw_radius * draw_radius - dx * dx));
-                const int top = std::max(0, static_cast<int>(std::ceil(center_y - half_height)));
-                const int bottom = std::min(size.y - 1, static_cast<int>(std::floor(center_y + half_height)));
-                const double pos = size.x > 1 ? static_cast<double>(x) / (size.x - 1) : 0.0;
-                const double scaled = pos * (m_cols.size() - 1);
-                const size_t idx = std::min(static_cast<size_t>(scaled), m_cols.size() - 2);
-                const double ratio = scaled - idx;
-
-                if (top <= bottom) {
-                    dc.SetBrush(wxBrush(mix_colour(m_cols[idx], m_cols[idx + 1], ratio)));
-                    dc.DrawRectangle(x, top, 1, bottom - top + 1);
-                }
-            }
-        }
-        else {
-            float ev_angle = 360.0 / m_cols.size();
-            const float overlap = 2.0f;
-            wxPoint center(size.x / 2, size.y / 2);
-            dc.SetPen(*wxTRANSPARENT_PEN);
-            dc.SetBrush(wxBrush(m_cols.front()));
-            dc.DrawCircle(center.x, center.y, radius);
-            for (int i = 0; i < m_cols.size(); i++) {
-                dc.SetBrush(m_cols[i]);
-                float startAngle = 270.0f + i * ev_angle;
-                float endAngle = startAngle + ev_angle;
-                dc.DrawEllipticArc(center.x - radius, center.y - radius, 2 * radius, 2 * radius, startAngle - overlap, endAngle + overlap);
-            }
-        }
-    }
-    else if (alpha == 0) {
+    if (alpha == 0) {
         wxSize bmp_size = m_bitmap_transparent_def.GetBmpSize();
         int center_x = (size.x - bmp_size.x) / 2;
         int center_y = (size.y - bmp_size.y) / 2;
@@ -1942,6 +1777,52 @@ void ColorPicker::doRender(wxDC& dc)
         dc.SetPen(wxPen(wxColour("#6B6B6B")));
         dc.SetBrush(*wxTRANSPARENT_BRUSH);
         dc.DrawCircle(size.x / 2, size.y / 2, radius);
+
+        if (m_cols.size() > 1) {
+            if (ctype == 0) {
+                int left = FromDIP(0);
+                float total_width = size.x;
+                int gwidth = std::round(total_width / (m_cols.size() - 1));
+
+                for (int i = 0; i < m_cols.size() - 1; i++) {
+
+                    if ((left + gwidth) > (size.x)) {
+                        gwidth = size.x - left;
+                    }
+
+                    auto rect = wxRect(left, 0, gwidth, size.y);
+                    dc.GradientFillLinear(rect, m_cols[i], m_cols[i + 1], wxEAST);
+                    left += gwidth;
+                }
+                if (wxGetApp().dark_mode()) {
+                    dc.DrawBitmap(m_bitmap_border_dark, wxPoint(0, 0));
+                }
+                else {
+                    dc.DrawBitmap(m_bitmap_border, wxPoint(0, 0));
+                }
+            }
+            else {
+                float ev_angle = 360.0 / m_cols.size();
+                float startAngle = 270.0;
+                float endAngle = 270.0;
+                dc.SetPen(*wxTRANSPARENT_PEN);
+                for (int i = 0; i < m_cols.size(); i++) {
+                    dc.SetBrush(m_cols[i]);
+                    endAngle += ev_angle;
+                    endAngle = endAngle > 360.0 ? endAngle - 360.0 : endAngle;
+                    wxPoint center(size.x / 2, size.y / 2);
+                    dc.DrawEllipticArc(center.x - radius, center.y - radius, 2 * radius, 2 * radius, startAngle, endAngle);
+                    startAngle += ev_angle;
+                    startAngle = startAngle > 360.0 ? startAngle - 360.0 : startAngle;
+                }
+                if (wxGetApp().dark_mode()) {
+                    dc.DrawBitmap(m_bitmap_border_dark, wxPoint(0, 0));
+                }
+                else {
+                    dc.DrawBitmap(m_bitmap_border, wxPoint(0, 0));
+                }
+            }
+        }
     }
 
     if (m_is_empty) {
@@ -2010,21 +1891,19 @@ ColorPickerPopup::ColorPickerPopup(wxWindow* parent)
     m_ams_fg_sizer->SetNonFlexibleGrowMode(wxFLEX_GROWMODE_SPECIFIED);
 
     //other
-    m_other_fg_sizer = new wxFlexGridSizer(0, 8, 0, 0);
-    m_other_fg_sizer->SetFlexibleDirection(wxBOTH);
-    m_other_fg_sizer->SetNonFlexibleGrowMode(wxFLEX_GROWMODE_SPECIFIED);
+    wxFlexGridSizer* fg_sizer;
+    fg_sizer = new wxFlexGridSizer(0, 8, 0, 0);
+    fg_sizer->SetFlexibleDirection(wxBOTH);
+    fg_sizer->SetNonFlexibleGrowMode(wxFLEX_GROWMODE_SPECIFIED);
 
 
     for (wxColour col : m_def_colors) {
         auto cp = new ColorPicker(m_def_color_box, wxID_ANY, wxDefaultPosition, wxDefaultSize);
         cp->set_color(col);
-        cp->set_colors({col});
-        cp->ctype = 2;
         cp->set_selected(false);
         cp->SetBackgroundColour(StateColor::darkModeColorFor(wxColour(238,238,238)));
         m_color_pickers.push_back(cp);
-        m_default_color_pickers.push_back(cp);
-        m_other_fg_sizer->Add(cp, 0, wxALL, FromDIP(3));
+        fg_sizer->Add(cp, 0, wxALL, FromDIP(3));
         cp->Bind(wxEVT_LEFT_DOWN, [this, cp](auto& e) {
             set_def_colour(cp->m_colour);
 
@@ -2091,7 +1970,7 @@ ColorPickerPopup::ColorPickerPopup(wxWindow* parent)
     m_sizer_box->Add(m_sizer_ams, 1, wxEXPAND|wxLEFT|wxRIGHT, FromDIP(10));
     m_sizer_box->Add(m_ams_fg_sizer, 0, wxEXPAND|wxLEFT|wxRIGHT, FromDIP(10));
     m_sizer_box->Add(m_sizer_other, 1, wxEXPAND|wxLEFT|wxRIGHT, FromDIP(10));
-    m_sizer_box->Add(m_other_fg_sizer, 0, wxEXPAND|wxLEFT|wxRIGHT, FromDIP(10));
+    m_sizer_box->Add(fg_sizer, 0, wxEXPAND|wxLEFT|wxRIGHT, FromDIP(10));
     m_sizer_box->Add(m_sizer_custom, 0, wxEXPAND|wxLEFT|wxRIGHT, FromDIP(10));
     m_sizer_box->Add(m_custom_cp, 0, wxEXPAND|wxLEFT|wxRIGHT, FromDIP(16));
     m_sizer_box->Add(0, 0, 0, wxTOP, FromDIP(10));
@@ -2102,7 +1981,7 @@ ColorPickerPopup::ColorPickerPopup(wxWindow* parent)
     m_def_color_box->Fit();
 
     m_sizer_main->Add(m_def_color_box, 0, wxALL | wxEXPAND, 10);
-    SetSizerAndFit(m_sizer_main);
+    SetSizer(m_sizer_main);
     Layout();
     Fit();
 
@@ -2140,15 +2019,13 @@ void ColorPickerPopup::on_custom_clr_picker(wxMouseEvent& /*event*/)
     wxPostEvent(GetParent(), evt);
 }
 
-void ColorPickerPopup::set_ams_colours(const std::vector<ColorItem>& ams)
+void ColorPickerPopup::set_ams_colours(std::vector<wxColour> ams)
 {
-    m_ams_fg_sizer->Clear(false);
     if (m_ams_color_pickers.size() > 0) {
         for (ColorPicker* col_pick:m_ams_color_pickers) {
 
             std::vector<ColorPicker*>::iterator iter = find(m_color_pickers.begin(), m_color_pickers.end(), col_pick);
             if (iter != m_color_pickers.end()) {
-                col_pick->Hide();
                 col_pick->Destroy();
                 m_color_pickers.erase(iter);
             }
@@ -2158,22 +2035,17 @@ void ColorPickerPopup::set_ams_colours(const std::vector<ColorItem>& ams)
     }
 
 
-    m_ams_color_items = ams;
-    for (const ColorItem& item : m_ams_color_items) {
-        if (item.colors.empty()) continue;
-
+    m_ams_colors = ams;
+    for (wxColour col : m_ams_colors) {
         auto cp = new ColorPicker(m_def_color_box, wxID_ANY, wxDefaultPosition, wxDefaultSize);
-        cp->set_color(item.colors.front());
-        cp->set_colors(item.colors);
-        cp->ctype = item.colors.size() > 1 ? item.ctype : 2;
-        cp->set_show_full(true);
+        cp->set_color(col);
         cp->set_selected(false);
         cp->SetBackgroundColour(StateColor::darkModeColorFor(wxColour(238,238,238)));
         m_color_pickers.push_back(cp);
         m_ams_color_pickers.push_back(cp);
         m_ams_fg_sizer->Add(cp, 0, wxALL, FromDIP(3));
         cp->Bind(wxEVT_LEFT_DOWN, [this, cp](auto& e) {
-            set_def_colour(cp->m_colour, cp->m_cols, cp->ctype);
+            set_def_colour(cp->m_colour);
 
             wxCommandEvent evt(EVT_SELECTED_COLOR);
             unsigned long g_col = ((cp->m_colour.Red() & 0xff) << 24) + ((cp->m_colour.Green() & 0xff) << 16) + ((cp->m_colour.Blue() & 0xff) << 8) + (cp->m_colour.Alpha() & 0xff);
@@ -2186,68 +2058,9 @@ void ColorPickerPopup::set_ams_colours(const std::vector<ColorItem>& ams)
     Fit();
 }
 
-void ColorPickerPopup::set_preset_colours(const std::vector<ColorItem>& preset_colors)
-{
-    m_other_fg_sizer->Clear(false);
-    if (!m_preset_color_pickers.empty()) {
-        for (ColorPicker* col_pick : m_preset_color_pickers) {
-            auto iter = std::find(m_color_pickers.begin(), m_color_pickers.end(), col_pick);
-            if (iter != m_color_pickers.end()) {
-                col_pick->Hide();
-                col_pick->Destroy();
-                m_color_pickers.erase(iter);
-            }
-        }
-        m_preset_color_pickers.clear();
-    }
-
-    for (const ColorItem& item : preset_colors) {
-        if (item.colors.empty()) continue;
-
-        auto cp = new ColorPicker(m_def_color_box, wxID_ANY, wxDefaultPosition, wxDefaultSize);
-        cp->set_color(item.colors.front());
-        cp->set_colors(item.colors);
-        cp->ctype = item.colors.size() > 1 ? item.ctype : 2;
-        cp->set_show_full(true);
-        cp->set_selected(false);
-        cp->SetBackgroundColour(StateColor::darkModeColorFor(wxColour(238,238,238)));
-        if (!item.name.empty()) {
-            cp->SetToolTip(item.name);
-        }
-
-        m_color_pickers.push_back(cp);
-        m_preset_color_pickers.push_back(cp);
-        cp->Bind(wxEVT_LEFT_DOWN, [this, cp](auto& e) {
-            set_def_colour(cp->m_colour, cp->m_cols, cp->ctype);
-
-            wxCommandEvent evt(EVT_SELECTED_COLOR);
-            unsigned long g_col = ((cp->m_colour.Red() & 0xff) << 24) + ((cp->m_colour.Green() & 0xff) << 16) + ((cp->m_colour.Blue() & 0xff) << 8) + (cp->m_colour.Alpha() & 0xff);
-            evt.SetInt(g_col);
-            wxPostEvent(GetParent(), evt);
-        });
-    }
-
-    const bool show_default_colours = m_preset_color_pickers.empty();
-    for (ColorPicker* cp : m_default_color_pickers) {
-        cp->Show(show_default_colours);
-    }
-    for (ColorPicker* cp : (show_default_colours ? m_default_color_pickers : m_preset_color_pickers)) {
-        m_other_fg_sizer->Add(cp, 0, wxALL, FromDIP(3));
-    }
-
-    m_other_fg_sizer->Layout();
-    Layout();
-    Fit();
-}
-
-void ColorPickerPopup::set_def_colour(wxColour col, std::vector<wxColour> cols, int ctype)
+void ColorPickerPopup::set_def_colour(wxColour col)
 {
     m_def_col = col;
-    if (cols.empty()) {
-        cols.push_back(col);
-    }
-    m_def_cols = cols;
-    m_def_ctype = m_def_cols.size() > 1 ? ctype : 2;
 
     for (ColorPicker* cp : m_color_pickers) {
         if (cp->m_selected) {
@@ -2256,8 +2069,7 @@ void ColorPickerPopup::set_def_colour(wxColour col, std::vector<wxColour> cols,
     }
 
     for (ColorPicker* cp : m_color_pickers) {
-        if (!cp->IsShown()) continue;
-        if (cp->ctype == m_def_ctype && cp->m_cols == m_def_cols) {
+        if (cp->m_colour == m_def_col) {
             cp->set_selected(true);
             break;
         }

src/slic3r/GUI/AMSMaterialsSetting.hpp

@@ -82,22 +82,14 @@ public:
 class ColorPickerPopup : public PopupWindow
 {
 public:
-    struct ColorItem
-    {
-        std::vector<wxColour> colors;
-        int                   ctype = 2;
-        wxString              name;
-    };
-
     ScalableBitmap m_ts_bitmap_custom;
     wxStaticBitmap* m_ts_stbitmap_custom;
     StaticBox* m_custom_cp;
     StaticBox* m_def_color_box;
     wxFlexGridSizer* m_ams_fg_sizer;
-    wxFlexGridSizer* m_other_fg_sizer;
     wxColour m_def_col;
     std::vector<wxColour> m_def_colors;
-    std::vector<ColorItem> m_ams_color_items;
+    std::vector<wxColour> m_ams_colors;
     std::vector<ColorPicker*> m_color_pickers;
     std::vector<ColorPicker*> m_ams_color_pickers;
 
@@ -105,20 +97,13 @@ public:
     ColorPickerPopup(wxWindow* parent);
     ~ColorPickerPopup() {};
     void on_custom_clr_picker(wxMouseEvent& event);
-    void set_ams_colours(const std::vector<ColorItem>& ams);
-    void set_preset_colours(const std::vector<ColorItem>& preset_colors);
-    void set_def_colour(wxColour col, std::vector<wxColour> cols = {}, int ctype = 2);
-    const std::vector<wxColour>& get_selected_colours() const { return m_def_cols; }
-    int get_selected_ctype() const { return m_def_ctype; }
+    void set_ams_colours(std::vector<wxColour> ams);
+    void set_def_colour(wxColour col);
     void paintEvent(wxPaintEvent& evt);
     virtual void OnDismiss() wxOVERRIDE;
     virtual bool ProcessLeftDown(wxMouseEvent& event) wxOVERRIDE;
 
-private:
-    std::vector<ColorPicker*> m_default_color_pickers;
-    std::vector<ColorPicker*> m_preset_color_pickers;
-    std::vector<wxColour> m_def_cols;
-    int m_def_ctype = 2;
+public:
 };
 
 

src/slic3r/GUI/BackgroundSlicingProcess.cpp

@@ -747,9 +747,7 @@ Print::ApplyStatus BackgroundSlicingProcess::apply(const Model& model, const Dyn
 
     // Orca: prevent resetting under gcode viewer mode
     if (invalidated != PrintBase::APPLY_STATUS_UNCHANGED) {
-        // Use the app’s plater accessor instead of going through mainframe, otherwise anything during startup that reaches apply() 
-        // (loading presets, config or input files, e.g. from the CLI) therefore dereferences a null `mainframe` and crashes.
-        const auto plater = GUI::wxGetApp().plater();
+        const auto plater = GUI::wxGetApp().mainframe->m_plater;
         if (plater && plater->only_gcode_mode()) {
             invalidated = PrintBase::APPLY_STATUS_UNCHANGED;
         }

src/slic3r/GUI/DeviceCore/DevDefs.h

@@ -163,8 +163,8 @@ public:
     ~devPrinterUtil() = delete;
 
 public:
-    static bool IsVirtualSlot(int ams_id) { return (ams_id == VIRTUAL_TRAY_MAIN_ID || ams_id == VIRTUAL_TRAY_DEPUTY_ID);}
-    static bool IsVirtualSlot(const std::string& ams_id) { return (ams_id == VIRTUAL_AMS_MAIN_ID_STR || ams_id == VIRTUAL_AMS_DEPUTY_ID_STR); }
+    static bool IsVirtualSlot(int ams_id);
+    static bool IsVirtualSlot(const std::string& ams_id);
 };
 
 namespace GUI
@@ -198,3 +198,6 @@ template<> struct std::hash<NozzleDef>
         return h1 ^ (h2 + 0x9e3779b9 + (h1 << 6) + (h1 >> 2));
     };
 };
+
+// key(extruder_id) -> { key1(nozzle type info), val1( number of the nozzle type)}
+using ExtruderNozzleInfos = std::unordered_map<int, std::unordered_map<NozzleDef, int>>;

src/slic3r/GUI/DeviceCore/DevFilaSystem.cpp

@@ -8,6 +8,7 @@
 #include <cstdlib>
 #include <chrono>
 #include <nlohmann/json.hpp>
+#include <wx/app.h>
 #include <wx/colour.h>
 #include <string>
 #include <wx/string.h>
@@ -33,6 +34,36 @@
 using namespace nlohmann;
 
 namespace Slic3r {
+
+bool devPrinterUtil::IsVirtualSlot(int ams_id)
+{
+    // When the app or preset bundle is unavailable we cannot know the vendor's
+    // extruder count, so fall back deterministically to the fixed Bambu pair
+    // {255, 254} rather than guessing from an unknown generic layout.
+    if (wxTheApp == nullptr || GUI::wxGetApp().preset_bundle == nullptr || GUI::wxGetApp().preset_bundle->is_bbl_vendor())
+        return ams_id == VIRTUAL_TRAY_MAIN_ID || ams_id == VIRTUAL_TRAY_DEPUTY_ID;
+
+    const int extruder_count = GUI::wxGetApp().preset_bundle->get_printer_extruder_count();
+    return ams_id >= VIRTUAL_TRAY_MAIN_ID - extruder_count + 1 && ams_id <= VIRTUAL_TRAY_MAIN_ID;
+}
+
+bool devPrinterUtil::IsVirtualSlot(const std::string& ams_id)
+{
+    // Strict: only a fully numeric string is a valid slot id. std::stoi alone
+    // would accept trailing garbage (e.g. "255abc" -> 255).
+    if (ams_id.empty())
+        return false;
+    for (char c : ams_id) {
+        if (c < '0' || c > '9')
+            return false;
+    }
+    try {
+        return IsVirtualSlot(std::stoi(ams_id));
+    } catch (...) {
+        return false;
+    }
+}
+
 static int _hex_digit_to_int(const char c) { return (c >= '0' && c <= '9') ? c - '0' : (c >= 'A' && c <= 'F') ? c - 'A' + 10 : (c >= 'a' && c <= 'f') ? c - 'a' + 10 : -1; }
 
 wxColour DevAmsTray::decode_color(const std::string &color)
@@ -200,18 +231,22 @@ wxString DevAms::GetDisplayName() const
 
 int DevAms::GetSlotCount() const
 {
-    // GetAmsType() maps AMS_LITE_MIXED -> AMS_LITE, so N9 reports 4 slots like AMS-Lite.
-    auto ams_type = GetAmsType();
-    if (ams_type == AMS || ams_type == AMS_LITE || ams_type == N3F)
-    {
-        return 4;
-    }
-    else if (ams_type == N3S)
-    {
+    // N3S is a 1-slot Bambu contract, so report 1 regardless of whether the
+    // preset bundle is momentarily unavailable (m_trays.size() can be 0).
+    if (GetAmsType() == N3S)
         return 1;
+
+    if (wxTheApp != nullptr && GUI::wxGetApp().preset_bundle != nullptr &&
+        GUI::wxGetApp().preset_bundle->is_bbl_vendor()) {
+        // GetAmsType() maps AMS_LITE_MIXED -> AMS_LITE, so N9 reports 4 slots like AMS-Lite.
+        auto ams_type = GetAmsType();
+        if (ams_type == AMS || ams_type == AMS_LITE || ams_type == N3F)
+        {
+            return 4;
+        }
     }
 
-    return 1;
+    return static_cast<int>(m_trays.size());
 }
 
 DevAmsTray* DevAms::GetTray(const std::string& tray_id) const
@@ -302,13 +337,21 @@ int DevFilaSystem::GetExtruderIdByAmsId(const std::string& ams_id) const
     {
         return it->second->GetExtruderId();
     }
-    else if (stoi(ams_id) == VIRTUAL_TRAY_MAIN_ID)
-    {
-        return MAIN_EXTRUDER_ID;
+
+    const bool is_bbl_vendor = wxTheApp != nullptr && GUI::wxGetApp().preset_bundle != nullptr && GUI::wxGetApp().preset_bundle->is_bbl_vendor();
+    if (!is_bbl_vendor && GetOwner()) {
+        for (const auto& tray : GetOwner()->vt_slot) {
+            if (tray.id == ams_id)
+                return VIRTUAL_TRAY_MAIN_ID - std::stoi(ams_id);
+        }
     }
-    else if (stoi(ams_id) == VIRTUAL_TRAY_DEPUTY_ID)
-    {
+
+    if (is_bbl_vendor && ams_id == VIRTUAL_AMS_MAIN_ID_STR)
+        return MAIN_EXTRUDER_ID;
+    if (is_bbl_vendor && ams_id == VIRTUAL_AMS_DEPUTY_ID_STR)
         return DEPUTY_EXTRUDER_ID;
+    if (!is_bbl_vendor && devPrinterUtil::IsVirtualSlot(ams_id)) {
+        return VIRTUAL_TRAY_MAIN_ID - std::stoi(ams_id);
     }
 
     assert(false && __FUNCTION__);
@@ -325,9 +368,22 @@ std::string DevFilaSystem::GetNozzleFlowStringByAmsId(const std::string& ams_id)
 std::map<int, DevAmsSlotId> DevFilaSystem::GetTrayIndexMap()
 {
     std::map<int, DevAmsSlotId> tray_id_map;
-    tray_id_map[VIRTUAL_TRAY_MAIN_ID]   = DevAmsSlotId{VIRTUAL_TRAY_MAIN_ID, 0};
-    tray_id_map[VIRTUAL_TRAY_DEPUTY_ID] = DevAmsSlotId{VIRTUAL_TRAY_DEPUTY_ID, 0};
+    const bool is_bbl_vendor = wxTheApp != nullptr && GUI::wxGetApp().preset_bundle != nullptr && GUI::wxGetApp().preset_bundle->is_bbl_vendor();
+    if (is_bbl_vendor) {
+        tray_id_map[VIRTUAL_TRAY_MAIN_ID]   = DevAmsSlotId{VIRTUAL_TRAY_MAIN_ID, 0};
+        tray_id_map[VIRTUAL_TRAY_DEPUTY_ID] = DevAmsSlotId{VIRTUAL_TRAY_DEPUTY_ID, 0};
+    } else if (GetOwner()) {
+        for (const auto& tray : GetOwner()->vt_slot) {
+            try {
+                const int tray_id = std::stoi(tray.id);
+                tray_id_map[tray_id] = DevAmsSlotId{tray_id, 0};
+            } catch (...) {
+                BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << " invalid virtual tray id: " << tray.id;
+            }
+        }
+    }
 
+    int generic_tray_index = 0;
     for (auto& [ams_id, ams_item] : GetAmsList()) {
         for (auto &[slot_id, slot_item] : ams_item->GetTrays()) {
             if (ams_item && slot_item) {
@@ -335,9 +391,11 @@ std::map<int, DevAmsSlotId> DevFilaSystem::GetTrayIndexMap()
                     int ams_id_int  = stoi(ams_id);
                     int slot_id_int = stoi(slot_id);
                     int tray_index  = -1;
-                    if (ams_item->GetAmsType() == DevAms::N3S) {
+                    if (!is_bbl_vendor) {
+                        tray_index = generic_tray_index + slot_id_int;
+                    } else if (ams_item->GetAmsType() == DevAms::N3S) {
                         tray_index = ams_id_int;
-                    } else if(ams_item->GetAmsType() == DevAms::AMS_LITE && ams_item->IsAmsLiteMixed()) {
+                    } else if (ams_item->GetAmsType() == DevAms::AMS_LITE && ams_item->IsAmsLiteMixed()) {
                         tray_index = 24 + slot_id_int;
                     } else {
                         tray_index = (ams_id_int * 4 + slot_id_int);
@@ -348,6 +406,8 @@ std::map<int, DevAmsSlotId> DevFilaSystem::GetTrayIndexMap()
                 }
             }
         }
+        if (!is_bbl_vendor)
+            generic_tray_index += static_cast<int>(ams_item->GetTrays().size());
     }
 
     return  tray_id_map;
@@ -913,6 +973,8 @@ void DevFilaSystemParser::ParseAgentFilament(const json& data, MachineObject* ob
             }
 
             ams->m_exist               = true;
+            ams->m_binded_extruder_set = {ext_id};
+            ams->m_binded_switcher_pos.reset();
             ams->m_current_temperature = u.value("temperature", (float) INVALID_AMS_TEMPERATURE);
             ams->m_humidity_percent    = u.value("humidity_percent", -1);
             ams->m_left_dry_time       = u.value("dry_time_min", 0);
@@ -995,16 +1057,22 @@ void DevFilaSystemParser::ParseAgentFilament(const json& data, MachineObject* ob
     }
 
     // --- external / direct spools -> obj->vt_slot ---
-    // extruder 0 -> main virtual slot, extruder >0 -> deputy.
+    // Keep one virtual slot per extruder. The legacy two-extruder mapping uses
+    // 255 for extruder 0 and 254 for extruder 1; continue that sequence for
+    // additional extruders (253, 252, ...).
     if (obj && data.contains("external") && data["external"].is_array())
     {
+        std::map<int, DevAmsTray> external_slots;
         obj->vt_slot.clear();
         for (const auto& e : data["external"])
         {
             if (!e.is_object())
                 continue;
             const int  ext   = e.value("extruder", MAIN_EXTRUDER_ID);
-            const int  vt_id = (ext == MAIN_EXTRUDER_ID) ? VIRTUAL_TRAY_MAIN_ID : VIRTUAL_TRAY_DEPUTY_ID;
+            if (ext < MAIN_EXTRUDER_ID || ext >= VIRTUAL_TRAY_MAIN_ID)
+                continue;
+
+            const int  vt_id = VIRTUAL_TRAY_MAIN_ID - ext;
             DevAmsTray tray(std::to_string(vt_id));
             tray.is_exists       = e.value("loaded", false);
             tray.m_fila_type     = e.value("material", std::string());
@@ -1013,8 +1081,11 @@ void DevFilaSystemParser::ParseAgentFilament(const json& data, MachineObject* ob
             tray.nozzle_temp_min = std::to_string(e.value("nozzle_temp_min", 0));
             tray.nozzle_temp_max = std::to_string(e.value("nozzle_temp_max", 0));
             tray.remain          = e.value("remain_percent", -1);
-            obj->vt_slot.push_back(tray);
+            external_slots.insert_or_assign(ext, std::move(tray));
         }
+
+        for (auto& entry : external_slots)
+            obj->vt_slot.push_back(std::move(entry.second));
     }
 }
 

src/slic3r/GUI/DeviceCore/DevFilaSystem.h

@@ -348,7 +348,7 @@ public:
     DevAmsTray* GetAmsTray(const std::string& ams_id, const std::string& tray_id) const;
     void        CollectAmsColors(std::vector<wxColour>& ams_colors) const;
 
-    // Map a linear tray index -> {ams_id, slot_id}. Includes the two virtual (external-spool) trays,
+    // Map a linear tray index -> {ams_id, slot_id}. Includes virtual external-spool trays,
     // N3S single-slot units, and the A2L/N9 AMS-Lite-mixed layout (trays 24-27).
     std::map<int, DevAmsSlotId> GetTrayIndexMap();
 
@@ -433,4 +433,4 @@ struct DevFilamentDryingPreset
     float filament_dev_ams_drying_heat_distortion_temperature = 0.0f;
 };
 
-}// namespace Slic3r
+}// namespace Slic3r

src/slic3r/GUI/DeviceCore/DevNozzleSystem.cpp

@@ -13,6 +13,7 @@
 #include "slic3r/GUI/DeviceCore/DevDefs.h"
 #include "libslic3r/PrintConfig.hpp"
 #include <boost/log/trivial.hpp>
+#include <wx/app.h>
 #include <wx/string.h>
 #include <string>
 #include "libslic3r/CommonDefs.hpp"
@@ -27,6 +28,7 @@
 #include <unordered_map>
 #include <optional>
 #include <cmath>
+#include "slic3r/GUI/GUI_App.hpp"
 
 using json = nlohmann::json;
 
@@ -176,34 +178,52 @@ DevFirmwareVersionInfo DevNozzle::GetFirmwareInfo() const
 int DevNozzle::GetLogicExtruderId() const
 {
     int total_ext_count = GetTotalExtruderCount();
-    if (total_ext_count == 1) {
-        return LOGIC_UNIQUE_EXTRUDER_ID;
-    } else if (total_ext_count == 2) {
-        if (AtLeftExtruder()) {
-            return LOGIC_L_EXTRUDER_ID;
-        } else if (AtRightExtruder()) {
-            return LOGIC_R_EXTRUDER_ID;
+
+    const bool is_bbl_vendor = wxTheApp != nullptr && GUI::wxGetApp().preset_bundle != nullptr &&
+                               GUI::wxGetApp().preset_bundle->is_bbl_vendor();
+    if (is_bbl_vendor) {
+        if (total_ext_count == 1) {
+            return LOGIC_UNIQUE_EXTRUDER_ID;
+        } else if (total_ext_count == 2) {
+            if (AtLeftExtruder()) {
+                return LOGIC_L_EXTRUDER_ID;
+            } else if (AtRightExtruder()) {
+                return LOGIC_R_EXTRUDER_ID;
+            }
         }
+
+        assert(0);
+        return LOGIC_UNIQUE_EXTRUDER_ID;
     }
 
-    assert(0);
-    return LOGIC_UNIQUE_EXTRUDER_ID;
+    // For some reason, BBL's logical extruder ID is inverted:
+    // physical extruder id = 0 (MAIN_EXTRUDER_ID) vs logical extruder id = 1 (LOGIC_R_EXTRUDER_ID)
+    // Likely because logical id reads from left to right (left = 0, right = 1)
+    // For generic N extruders, this inversion does not apply.
+    if (IsOnRack()) return INVALID_EXTRUDER_ID;
+    return m_nozzle_id;
 }
 
 int DevNozzle::GetExtruderId() const
 {
-    int total_ext_count = GetTotalExtruderCount();
-    if (total_ext_count == 1) {
-        return MAIN_EXTRUDER_ID;
-    } else if (total_ext_count == 2) {
-        if (AtRightExtruder()) {
+    const bool is_bbl_vendor = wxTheApp != nullptr && GUI::wxGetApp().preset_bundle != nullptr &&
+                               GUI::wxGetApp().preset_bundle->is_bbl_vendor();
+    if (is_bbl_vendor) {
+        int total_ext_count = GetTotalExtruderCount();
+        if (total_ext_count == 1) {
             return MAIN_EXTRUDER_ID;
-        } else if (AtLeftExtruder()) {
-            return DEPUTY_EXTRUDER_ID;
+        } else if (total_ext_count == 2) {
+            if (AtRightExtruder()) {
+                return MAIN_EXTRUDER_ID;
+            } else if (AtLeftExtruder()) {
+                return DEPUTY_EXTRUDER_ID;
+            }
         }
+    
+        return MAIN_EXTRUDER_ID;
     }
 
-    return MAIN_EXTRUDER_ID;
+    return m_nozzle_id;
 }
 
 bool DevNozzle::AtLeftExtruder() const