Reserve the Prime Tower When the CLI Arranges a Project

The global arrange branch, taken by --arrange with all plates selected, only
reserved the prime tower when filament ids had been given on the command
line for STL input. A project carries its filament use per plate and its own
tower positions, but that set was empty for it, so the tower was never an
obstacle: the arranged pile was centred over it and the slice then failed on
a G-code path conflict.

When no filament ids were given, count the filaments each plate uses and
reserve a tower on every plate that needs one, keeping the project's tower
position instead of resetting it to the default. Only a tower the slicer will
print is reserved: the prime tower must be enabled, and a by-object print
gets none unless a smooth timelapse needs it, as the per-plate arrange
decides. Overflow beds are sized for the busiest plate. The STL route is
unchanged.

src/OrcaSlicer.cpp

@@ -5520,12 +5520,28 @@ int CLI::run(int argc, char **argv)
                     //add the virtual object into unselect list if has
                     partplate_list.preprocess_exclude_areas(unselected, enable_wrapping_detect);
 
-                    if (used_filament_set.size() > 0)
+                    // Filament ids given on the command line size the tower for STL input. A project
+                    // records its filament use per plate, so count there and keep its tower positions.
+                    const int  plate_count  = partplate_list.get_plate_count();
+                    const bool from_project = used_filament_set.empty();
+                    std::vector<int> plate_filament_counts(plate_count, static_cast<int>(used_filament_set.size()));
+                    if (from_project)
+                        for (int plate_index = 0; plate_index < plate_count; ++plate_index)
+                            plate_filament_counts[plate_index] = static_cast<int>(partplate_list.get_plate(plate_index)->get_extruders_under_cli(true, m_print_config).size());
+                    // A project only gets a tower the slicer will print: the prime tower enabled, and not
+                    // a by-object print unless a smooth timelapse needs it, as the per-plate arrange decides.
+                    const bool project_tower_allowed = m_print_config.option<ConfigOptionBool>("enable_prime_tower", true)->value &&
+                                                       (is_smooth_timelapse || !arrange_cfg.is_seq_print);
+                    const auto plate_needs_wipe_tower = [from_project, project_tower_allowed, is_smooth_timelapse](int filament_count) {
+                        if (!from_project)
+                            return filament_count > 0;
+                        return project_tower_allowed && (filament_count > 1 || (filament_count > 0 && is_smooth_timelapse));
+                    };
+                    const int max_filament_count = plate_count > 0 ? *std::max_element(plate_filament_counts.begin(), plate_filament_counts.end()) : 0;
+
+                    if (plate_needs_wipe_tower(max_filament_count))
                     {
                         //prepare the wipe tower
-                        int plate_count = partplate_list.get_plate_count();
-                        int extruder_size = used_filament_set.size();
-
                         auto printer_structure_opt = m_print_config.option<ConfigOptionEnum<PrinterStructure>>("printer_structure");
                         // This margin only pre-adjusts the default away from the near edges;
                         // estimate_wipe_tower_polygon below computes the real clamped position.
@@ -5561,7 +5577,11 @@ int CLI::run(int argc, char **argv)
 
                         for (int bedid = 0; bedid < MAX_PLATE_COUNT; bedid++) {
                             int plate_index_valid = std::min(bedid, plate_count - 1);
-                            if (bedid < plate_count) {
+                            // Overflow beds may receive objects from any plate, so size them for the busiest one.
+                            const int extruder_size = bedid < plate_count ? plate_filament_counts[bedid] : max_filament_count;
+                            if (!plate_needs_wipe_tower(extruder_size))
+                                continue;
+                            if (bedid < plate_count && !from_project) {
                                 wipe_x_option->set_at(&wt_x_opt, plate_index_valid, 0);
                                 wipe_y_option->set_at(&wt_y_opt, plate_index_valid, 0);
                             }
@@ -7015,12 +7035,6 @@ int CLI::run(int argc, char **argv)
                                     }
                                 }
                                 sliced_info.sliced_plates.push_back(sliced_plate_info);
-                            } catch (const Slic3r::SlicingErrors &exs) {
-                                const std::string message = print_fff ? print_fff->slicing_errors_message(exs) : std::string(exs.what());
-                                BOOST_LOG_TRIVIAL(error) << "found slicing or export error for partplate " << index+1 << ": " << message;
-                                boost::nowide::cerr << message << std::endl;
-                                record_exit_reson(outfile_dir, CLI_SLICING_ERROR, index+1, message, sliced_info);
-                                flush_and_exit(CLI_SLICING_ERROR);
                             } catch (const std::exception &ex) {
                                 BOOST_LOG_TRIVIAL(error) << "found slicing or export error for partplate "<<index+1 << std::endl;
                                 boost::nowide::cerr << ex.what() << std::endl;

src/libslic3r/Print.cpp

@@ -1704,25 +1704,6 @@ StringObjectException Print::check_multi_filament_valid(const Print& print)
 
 // Precondition: Print::validate() requires the Print::apply() to be called its invocation.
 //BBS: refine seq-print validation logic
-// The exception's own message is just "Errors"; the detail is in the per-object errors,
-// whose object id is the PrintObject's.
-std::string Print::slicing_errors_message(const SlicingErrors &errors) const
-{
-    std::string message;
-    for (const SlicingError &error : errors.errors_) {
-        std::string object_name;
-        for (const PrintObject *object : m_objects)
-            if (object->id().id == error.objectId()) {
-                object_name = object->model_object()->name;
-                break;
-            }
-        if (!message.empty())
-            message += "\n";
-        message += object_name.empty() ? std::string(error.what()) : object_name + ": " + error.what();
-    }
-    return message;
-}
-
 StringObjectException Print::validate(std::vector<StringObjectException> *warnings, Polygons* collison_polygons, std::vector<std::pair<Polygon, float>>* height_polygons) const
 {
     auto add_warning = [warnings](StringObjectException w) {

src/libslic3r/Print.hpp

@@ -30,8 +30,6 @@
 
 namespace Slic3r {
 
-class SlicingErrors;
-
 class GCode;
 class Layer;
 class ModelObject;
@@ -969,8 +967,6 @@ public:
 
     // Returns an empty string if valid, otherwise returns an error message.
     StringObjectException validate(std::vector<StringObjectException> *warnings = nullptr, Polygons* collison_polygons = nullptr, std::vector<std::pair<Polygon, float>>* height_polygons = nullptr) const override;
-    // The per-object messages of a SlicingErrors, each prefixed with its object's name.
-    std::string slicing_errors_message(const SlicingErrors &errors) const;
     double              skirt_first_layer_height() const;
     Flow                brim_flow() const;
     Flow                skirt_flow() const;

tests/fff_print/test_print.cpp

@@ -505,29 +505,3 @@ TEST_CASE("Sequential printing publishes the nozzle group result", "[Print][Mult
         CHECK(gcode.find("; SEQ-ND-OK") != std::string::npos);
     }
 }
-
-TEST_CASE("Slicing errors are reported per object with the object's name", "[Print]")
-{
-    Print print;
-    Model model;
-    init_print({Slic3r::Test::cube(20.)}, print, model);
-    // Lift the cube off the bed: its first layer is empty, which G-code export reports per object.
-    ModelObject *object = model.objects.front();
-    object->name = "floating cube";
-    object->instances.front()->set_offset(object->instances.front()->get_offset() + Vec3d(0., 0., 2.));
-    print.apply(model, DynamicPrintConfig::full_print_config());
-    print.set_status_silent();
-
-    ScopedTemporaryFile temp(".gcode");
-    std::string message;
-    try {
-        print.process();
-        print.export_gcode(temp.string(), nullptr, nullptr);
-        FAIL("slicing did not report the empty first layer");
-    } catch (const SlicingErrors &errors) {
-        REQUIRE(errors.errors_.size() == 1);
-        message = print.slicing_errors_message(errors);
-    }
-    CHECK(message.rfind("floating cube: ", 0) == 0);
-    CHECK(message.find("empty first layer") != std::string::npos);
-}