ci: add maintainer-gated workflow to publish build artifacts to a draft release

2026-06-10 14:02:47 +00:00 · 2026-06-08 12:03:47 +08:00
235 changed files with 4763 additions and 6405 deletions
--- a/.github/workflows/publish_release.yml
+++ b/.github/workflows/publish_release.yml
@@ -77,8 +77,7 @@ jobs:
            -p 'OrcaSlicer_Windows_*' \
            -p 'OrcaSlicer_Mac_universal_*' \
            -p 'OrcaSlicer_Linux_ubuntu_*' \
-            -p 'OrcaSlicer-Linux-flatpak_*' \
-            -p 'PDB'
+            -p 'OrcaSlicer-Linux-flatpak_*'
          echo "Downloaded artifact folders:"
          ls -1 artifacts

@@ -100,8 +99,6 @@ jobs:
          find artifacts -type f -name '*.AppImage' -exec cp -v {} upload/ \;
          # Flatpak bundles (x86_64 + aarch64).
          find artifacts -type f -name '*.flatpak' -exec cp -v {} upload/ \;
-          # Windows debug symbols (PDB archive, for developers).
-          find artifacts -type f -name 'Debug_PDB_*.7z' -exec cp -v {} upload/ \;

          # Portable Windows build is an unzipped folder artifact; re-zip it to the
          # released filename (this one stays a .zip on the release).
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -220,9 +220,7 @@ if (MSVC)
    # /bigobj (Increase Number of Sections in .Obj file)
    # error C3859: virtual memory range for PCH exceeded; please recompile with a command line option of '-Zm90' or greater
    # Generate symbols at every build target, even for the release.
-	# -Zm520 fixes error C3859 but forces the compiler to pre-allocate that memory for every translation unit regardless
-	# combining /Zi with /FS frees up a significant amount of memory pressure across all parallel compile jobs and makes /MP faster overall.
-    add_compile_options(-bigobj /Zi /FS)
+    add_compile_options(-bigobj -Zm520 /Zi)
    # Disable STL4007: Many result_type typedefs and all argument_type, first_argument_type, and second_argument_type typedefs are deprecated in C++17.
    #FIXME Remove this line after eigen library adapts to the new C++17 adaptor rules.
    add_compile_options(-D_SILENCE_CXX17_ADAPTOR_TYPEDEFS_DEPRECATION_WARNING)
@@ -233,11 +231,6 @@ if (MSVC)
    # Disable warnings on comparison of unsigned and signed
    # C4018: signed/unsigned mismatch
    add_compile_options(/wd4018)
-    # Prevent linker restart when TBB (or other deps) built with /GL are linked
-	# Make your full (clean) build slower because it enables link-time code generation across all translation units.
-	# helps incremental builds by preventing the double-link restart from TBB
-    set(CMAKE_EXE_LINKER_FLAGS    "${CMAKE_EXE_LINKER_FLAGS} /LTCG")
-    set(CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} /LTCG")
 endif ()

 if (${CMAKE_CXX_COMPILER_ID} STREQUAL "AppleClang" AND ${CMAKE_CXX_COMPILER_VERSION} VERSION_GREATER 15)
--- a/resources/images/param_junction_deviation.svg
+++ b/resources/images/param_junction_deviation.svg
@@ -1,10 +0,0 @@
-<svg xmlns="http://www.w3.org/2000/svg" width="18" height="18" viewBox="0 0 18 18">
-  <line x1="0.5" y1="4.5" x2="7.5" y2="4.5" style="fill:none;stroke:#949494;stroke-linecap:square;stroke-linejoin:round"/>
-  <line x1="15.5" y1="4.5" x2="16.5" y2="4.5" style="fill:none;stroke:#949494;stroke-linecap:square;stroke-linejoin:round"/>
-  <rect x="7.5" y="0.5" width="8" height="13" rx="1" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/>
-  <circle cx="11.5" cy="7.5" r="2" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/>
-  <polyline points="9.5 13.5 11.5 16.5 13.5 13.5" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/>
-
-  <path d="M1.5 6.2 L1.5 11.6 C1.5 14.0 3.0 15.5 5.4 15.5 L8.2 15.5"
-        style="fill:none;stroke:#009688;stroke-linecap:round;stroke-linejoin:round"/>
-</svg>
--- a/resources/profiles/BBL.json
+++ b/resources/profiles/BBL.json
@@ -1,7 +1,7 @@
 {
 	"name": "Bambulab",
 	"url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
-	"version": "02.01.00.16",
+	"version": "02.01.00.15",
 	"force_update": "0",
 	"description": "BBL configurations",
 	"machine_model_list": [
--- a/resources/profiles/BBL/machine/Bambu
+++ b/resources/profiles/BBL/machine/Bambu
@@ -145,7 +145,6 @@
 		"20"
 	],
 	"support_chamber_temp_control": "1",
-	"support_air_filtration": "1",
 	"upward_compatible_machine": [
 		"Bambu Lab A1 0.4 nozzle",
 		"Bambu Lab P2S 0.4 nozzle",
--- a/resources/profiles/M3D.json
+++ b/resources/profiles/M3D.json
@@ -1,6 +1,6 @@
 {
 	"name": "M3D",
-	"version": "02.04.00.01",
+	"version": "02.04.00.00",
 	"force_update": "0",
 	"description": "Configuration for M3D printers",
 	"machine_model_list": [
--- a/resources/profiles/M3D/process/0.15mm
+++ b/resources/profiles/M3D/process/0.15mm
@@ -40,5 +40,6 @@
 	"support_type": "normal(manual)",
 	"travel_speed": "100",
 	"wall_loops": "2",
-	"wipe_tower_extra_spacing": "200%"
+	"wipe_tower_extra_spacing": "200%",
+	"wipe_tower_filament": "2"
 }
--- a/resources/profiles/M3D/process/0.20mm
+++ b/resources/profiles/M3D/process/0.20mm
@@ -41,5 +41,6 @@
 	"top_surface_speed": "40",
 	"travel_speed": "100",
 	"wall_loops": "2",
-	"wipe_tower_extra_spacing": "200%"
+	"wipe_tower_extra_spacing": "200%",
+	"wipe_tower_filament": "2"
 }
--- a/resources/profiles/M3D/process/fdm_process_common.json
+++ b/resources/profiles/M3D/process/fdm_process_common.json
@@ -25,5 +25,6 @@
 	"top_surface_speed": "40",
 	"travel_speed": "100",
 	"wall_loops": "2",
-	"wipe_tower_extra_spacing": "200%"
+	"wipe_tower_extra_spacing": "200%",
+	"wipe_tower_filament": "2"
 }
--- a/resources/profiles/Qidi.json
+++ b/resources/profiles/Qidi.json
@@ -1,6 +1,6 @@
 {
 	"name": "Qidi",
-	"version": "02.04.00.02",
+	"version": "02.04.00.01",
 	"force_update": "0",
 	"description": "Qidi configurations",
 	"machine_model_list": [
--- a/resources/profiles/Qidi/machine/Qidi
+++ b/resources/profiles/Qidi/machine/Qidi
@@ -48,7 +48,7 @@
 		"20"
 	],
 	"machine_pause_gcode": "PAUSE",
-	"machine_start_gcode": "INIT_MAPPING_VALUE\nPRINT_START BED=[bed_temperature_initial_layer_single] HOTEND=[nozzle_temperature_initial_layer] CHAMBER=[chamber_temperature] EXTRUDER=[initial_no_support_extruder]\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nM83\nT[initial_tool]\nM140 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nM141 S[chamber_temperature]\nG4 P3000\nG1 X108 Y1 F30000\nG0 Z[initial_layer_print_height] F600\nG0 X128 E8 F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X133 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X138 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X143 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X148 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X153 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4  * 60}\nG1 X154 Z-0.1\nG1 X158\nG1 Z1 F600\nG1 X108 Y2.5 F30000\nG0 Z[initial_layer_print_height] F600\nG0 X128 E10 F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X133 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X138 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X143 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X148 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X153 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X154 Z-0.1\nG1 X158\nG1 Z1 F600",
+	"machine_start_gcode": "INIT_MAPPING_VALUE\nPRINT_START BED=[bed_temperature_initial_layer_single] HOTEND=[nozzle_temperature_initial_layer] CHAMBER=[chamber_temperature] EXTRUDER=[initial_no_support_extruder]\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nM83\nM140 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nM141 S[chamber_temperature]\nG4 P3000\nT[initial_tool]\nG1 X108.000 Y1 F30000\nG0 Z[initial_layer_print_height] F600\n;G1 E3 F1800\nG90\nM83\nG0 X128 E8  F{outer_wall_volumetric_speed/(24/20)    * 60}\nG0 X133 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X138 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X143 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X148 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X153 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG91\nG1 X1 Z-0.300\nG1 X4\nG1 Z1 F1200\nG90\nM400\nG1 X108.000 Y2.5 F30000\nG0 Z[initial_layer_print_height] F600\nM83\nG0 X128 E10  F{outer_wall_volumetric_speed/(24/20)    * 60}\nG0 X133 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X138 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X143 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X148 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X153 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG91\nG1 X1 Z-0.300\nG1 X4\nG1 Z1 F1200\nG90\nM400\nG1 Z1 F600",
 	"machine_unload_filament_time": "35",
 	"nozzle_diameter": [
 		"0.4"
--- a/resources/profiles/SeeMeCNC.json
+++ b/resources/profiles/SeeMeCNC.json
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_ABS.json
+++ b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_ABS.json
@@ -261,17 +261,5 @@
 	],
 	"keep_fan_always_on": [
 		"0"
-	],
-	"filament_retraction_length": [
-		"5"
-	],
-	"filament_z_hop": [
-		"0.3"
-	],
-	"filament_retraction_speed": [
-		"45"
-	],
-	"filament_deretraction_speed": [
-		"35"
 	]
 }
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_ABS_0_4mm.json
+++ b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_ABS_0_4mm.json
@@ -1,64 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC ABS 0.4 nozzle",
-	"inherits": "SeeMeCNC ABS",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC ABS 0.4 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.4 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.4 nozzle",
-		"SeeMeCNC RostockMAX v4 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.16mm Fine @SeeMeCNC Artemis 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 300 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.16mm Fine @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.16mm Fine @SeeMeCNC RostockMAX v4 0.4",
-		"0.20mm Standard @SeeMeCNC Artemis 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 300 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.20mm Standard @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.20mm Standard @SeeMeCNC RostockMAX v4 0.4",
-		"0.24mm Draft @SeeMeCNC Artemis 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 300 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.24mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.24mm Draft @SeeMeCNC RostockMAX v4 0.4",
-		"0.28mm Extra Draft @SeeMeCNC Artemis 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 300 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.28mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.28mm Extra Draft @SeeMeCNC RostockMAX v4 0.4"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"5"
-	],
-	"filament_z_hop": [
-		"0.2"
-	],
-	"filament_retraction_speed": [
-		"45"
-	],
-	"filament_deretraction_speed": [
-		"35"
-	],
-	"filament_id": "SMCFB00104"
-}
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_ABS_0_5mm.json
+++ b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_ABS_0_5mm.json
@@ -1,64 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC ABS 0.5 nozzle",
-	"inherits": "SeeMeCNC ABS",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC ABS 0.5 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.5 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.5 nozzle",
-		"SeeMeCNC RostockMAX v4 0.5 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.20mm Fine @SeeMeCNC Artemis 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
-		"0.25mm Standard @SeeMeCNC Artemis 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.25mm Standard @SeeMeCNC RostockMAX v4 0.5",
-		"0.30mm Draft @SeeMeCNC Artemis 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 300 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.30mm Draft @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.30mm Draft @SeeMeCNC RostockMAX v4 0.5",
-		"0.35mm Extra Draft @SeeMeCNC Artemis 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 300 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.35mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.35mm Extra Draft @SeeMeCNC RostockMAX v4 0.5"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"5"
-	],
-	"filament_z_hop": [
-		"0.3"
-	],
-	"filament_retraction_speed": [
-		"45"
-	],
-	"filament_deretraction_speed": [
-		"35"
-	],
-	"filament_id": "SMCFB00105"
-}
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_ABS_0_7mm.json
+++ b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_ABS_0_7mm.json
@@ -1,64 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC ABS 0.7 nozzle",
-	"inherits": "SeeMeCNC ABS",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC ABS 0.7 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.7 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.7 nozzle",
-		"SeeMeCNC RostockMAX v4 0.7 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.28mm Fine @SeeMeCNC Artemis 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 300 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.28mm Fine @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.28mm Fine @SeeMeCNC RostockMAX v4 0.7",
-		"0.35mm Standard @SeeMeCNC Artemis 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 300 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.35mm Standard @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.35mm Standard @SeeMeCNC RostockMAX v4 0.7",
-		"0.42mm Draft @SeeMeCNC Artemis 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 300 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.42mm Draft @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.42mm Draft @SeeMeCNC RostockMAX v4 0.7",
-		"0.49mm Extra Draft @SeeMeCNC Artemis 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 300 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.49mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.49mm Extra Draft @SeeMeCNC RostockMAX v4 0.7"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"6"
-	],
-	"filament_z_hop": [
-		"0.4"
-	],
-	"filament_retraction_speed": [
-		"45"
-	],
-	"filament_deretraction_speed": [
-		"35"
-	],
-	"filament_id": "SMCFB00107"
-}
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_ABS_1_0mm.json
+++ b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_ABS_1_0mm.json
@@ -1,64 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC ABS 1.0 nozzle",
-	"inherits": "SeeMeCNC ABS",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC ABS 1.0 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 300 1.0 nozzle",
-		"SeeMeCNC RostockMAX v3.2 1.0 nozzle",
-		"SeeMeCNC RostockMAX v4 1.0 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.40mm Fine @SeeMeCNC Artemis 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 300 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.40mm Fine @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.40mm Fine @SeeMeCNC RostockMAX v4 1.0",
-		"0.50mm Standard @SeeMeCNC Artemis 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 300 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.50mm Standard @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.50mm Standard @SeeMeCNC RostockMAX v4 1.0",
-		"0.60mm Draft @SeeMeCNC Artemis 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 300 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.60mm Draft @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.60mm Draft @SeeMeCNC RostockMAX v4 1.0",
-		"0.70mm Extra Draft @SeeMeCNC Artemis 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 300 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.70mm Extra Draft @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.70mm Extra Draft @SeeMeCNC RostockMAX v4 1.0"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"6"
-	],
-	"filament_z_hop": [
-		"0.5"
-	],
-	"filament_retraction_speed": [
-		"45"
-	],
-	"filament_deretraction_speed": [
-		"35"
-	],
-	"filament_id": "SMCFB00110"
-}
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PA-CF.json
+++ b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PA-CF.json
@@ -264,17 +264,5 @@
 	],
 	"keep_fan_always_on": [
 		"0"
-	],
-	"filament_retraction_length": [
-		"5"
-	],
-	"filament_z_hop": [
-		"0.3"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
 	]
 }
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PA_CF_0_4mm.json
+++ b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PA_CF_0_4mm.json
@@ -1,64 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PA-CF 0.4 nozzle",
-	"inherits": "SeeMeCNC PA-CF",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PA-CF 0.4 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.4 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.4 nozzle",
-		"SeeMeCNC RostockMAX v4 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.16mm Fine @SeeMeCNC Artemis 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 300 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.16mm Fine @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.16mm Fine @SeeMeCNC RostockMAX v4 0.4",
-		"0.20mm Standard @SeeMeCNC Artemis 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 300 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.20mm Standard @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.20mm Standard @SeeMeCNC RostockMAX v4 0.4",
-		"0.24mm Draft @SeeMeCNC Artemis 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 300 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.24mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.24mm Draft @SeeMeCNC RostockMAX v4 0.4",
-		"0.28mm Extra Draft @SeeMeCNC Artemis 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 300 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.28mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.28mm Extra Draft @SeeMeCNC RostockMAX v4 0.4"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"5"
-	],
-	"filament_z_hop": [
-		"0.2"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"filament_id": "SMCFN00104"
-}
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PA_CF_0_5mm.json
+++ b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PA_CF_0_5mm.json
@@ -1,64 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PA-CF 0.5 nozzle",
-	"inherits": "SeeMeCNC PA-CF",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PA-CF 0.5 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.5 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.5 nozzle",
-		"SeeMeCNC RostockMAX v4 0.5 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.20mm Fine @SeeMeCNC Artemis 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
-		"0.25mm Standard @SeeMeCNC Artemis 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.25mm Standard @SeeMeCNC RostockMAX v4 0.5",
-		"0.30mm Draft @SeeMeCNC Artemis 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 300 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.30mm Draft @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.30mm Draft @SeeMeCNC RostockMAX v4 0.5",
-		"0.35mm Extra Draft @SeeMeCNC Artemis 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 300 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.35mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.35mm Extra Draft @SeeMeCNC RostockMAX v4 0.5"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"5"
-	],
-	"filament_z_hop": [
-		"0.3"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"filament_id": "SMCFN00105"
-}
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PA_CF_0_7mm.json
+++ b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PA_CF_0_7mm.json
@@ -1,64 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PA-CF 0.7 nozzle",
-	"inherits": "SeeMeCNC PA-CF",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PA-CF 0.7 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.7 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.7 nozzle",
-		"SeeMeCNC RostockMAX v4 0.7 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.28mm Fine @SeeMeCNC Artemis 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 300 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.28mm Fine @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.28mm Fine @SeeMeCNC RostockMAX v4 0.7",
-		"0.35mm Standard @SeeMeCNC Artemis 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 300 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.35mm Standard @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.35mm Standard @SeeMeCNC RostockMAX v4 0.7",
-		"0.42mm Draft @SeeMeCNC Artemis 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 300 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.42mm Draft @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.42mm Draft @SeeMeCNC RostockMAX v4 0.7",
-		"0.49mm Extra Draft @SeeMeCNC Artemis 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 300 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.49mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.49mm Extra Draft @SeeMeCNC RostockMAX v4 0.7"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"6"
-	],
-	"filament_z_hop": [
-		"0.4"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"filament_id": "SMCFN00107"
-}
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PA_CF_1_0mm.json
+++ b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PA_CF_1_0mm.json
@@ -1,64 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PA-CF 1.0 nozzle",
-	"inherits": "SeeMeCNC PA-CF",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PA-CF 1.0 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 300 1.0 nozzle",
-		"SeeMeCNC RostockMAX v3.2 1.0 nozzle",
-		"SeeMeCNC RostockMAX v4 1.0 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.40mm Fine @SeeMeCNC Artemis 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 300 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.40mm Fine @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.40mm Fine @SeeMeCNC RostockMAX v4 1.0",
-		"0.50mm Standard @SeeMeCNC Artemis 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 300 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.50mm Standard @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.50mm Standard @SeeMeCNC RostockMAX v4 1.0",
-		"0.60mm Draft @SeeMeCNC Artemis 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 300 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.60mm Draft @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.60mm Draft @SeeMeCNC RostockMAX v4 1.0",
-		"0.70mm Extra Draft @SeeMeCNC Artemis 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 300 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.70mm Extra Draft @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.70mm Extra Draft @SeeMeCNC RostockMAX v4 1.0"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"6"
-	],
-	"filament_z_hop": [
-		"0.5"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"filament_id": "SMCFN00110"
-}
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG-CF.json
+++ b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG-CF.json
@@ -261,17 +261,5 @@
 	],
 	"keep_fan_always_on": [
 		"0"
-	],
-	"filament_retraction_length": [
-		"5"
-	],
-	"filament_z_hop": [
-		"0.3"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
 	]
 }
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG.json
+++ b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG.json
@@ -261,17 +261,5 @@
 	],
 	"keep_fan_always_on": [
 		"1"
-	],
-	"filament_retraction_length": [
-		"6"
-	],
-	"filament_z_hop": [
-		"0.3"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
 	]
 }
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_0_4mm.json
+++ b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_0_4mm.json
@@ -1,64 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PETG 0.4 nozzle",
-	"inherits": "SeeMeCNC PETG",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PETG 0.4 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.4 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.4 nozzle",
-		"SeeMeCNC RostockMAX v4 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.16mm Fine @SeeMeCNC Artemis 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 300 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.16mm Fine @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.16mm Fine @SeeMeCNC RostockMAX v4 0.4",
-		"0.20mm Standard @SeeMeCNC Artemis 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 300 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.20mm Standard @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.20mm Standard @SeeMeCNC RostockMAX v4 0.4",
-		"0.24mm Draft @SeeMeCNC Artemis 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 300 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.24mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.24mm Draft @SeeMeCNC RostockMAX v4 0.4",
-		"0.28mm Extra Draft @SeeMeCNC Artemis 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 300 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.28mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.28mm Extra Draft @SeeMeCNC RostockMAX v4 0.4"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"5"
-	],
-	"filament_z_hop": [
-		"0.2"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"filament_id": "SMCFG00104"
-}
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_0_5mm.json
+++ b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_0_5mm.json
@@ -1,64 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PETG 0.5 nozzle",
-	"inherits": "SeeMeCNC PETG",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PETG 0.5 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.5 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.5 nozzle",
-		"SeeMeCNC RostockMAX v4 0.5 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.20mm Fine @SeeMeCNC Artemis 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
-		"0.25mm Standard @SeeMeCNC Artemis 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.25mm Standard @SeeMeCNC RostockMAX v4 0.5",
-		"0.30mm Draft @SeeMeCNC Artemis 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 300 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.30mm Draft @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.30mm Draft @SeeMeCNC RostockMAX v4 0.5",
-		"0.35mm Extra Draft @SeeMeCNC Artemis 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 300 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.35mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.35mm Extra Draft @SeeMeCNC RostockMAX v4 0.5"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"6"
-	],
-	"filament_z_hop": [
-		"0.3"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"filament_id": "SMCFG00105"
-}
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_0_7mm.json
+++ b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_0_7mm.json
@@ -1,64 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PETG 0.7 nozzle",
-	"inherits": "SeeMeCNC PETG",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PETG 0.7 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.7 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.7 nozzle",
-		"SeeMeCNC RostockMAX v4 0.7 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.28mm Fine @SeeMeCNC Artemis 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 300 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.28mm Fine @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.28mm Fine @SeeMeCNC RostockMAX v4 0.7",
-		"0.35mm Standard @SeeMeCNC Artemis 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 300 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.35mm Standard @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.35mm Standard @SeeMeCNC RostockMAX v4 0.7",
-		"0.42mm Draft @SeeMeCNC Artemis 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 300 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.42mm Draft @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.42mm Draft @SeeMeCNC RostockMAX v4 0.7",
-		"0.49mm Extra Draft @SeeMeCNC Artemis 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 300 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.49mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.49mm Extra Draft @SeeMeCNC RostockMAX v4 0.7"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"6"
-	],
-	"filament_z_hop": [
-		"0.4"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"filament_id": "SMCFG00107"
-}
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_1_0mm.json
+++ b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_1_0mm.json
@@ -1,64 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PETG 1.0 nozzle",
-	"inherits": "SeeMeCNC PETG",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PETG 1.0 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 300 1.0 nozzle",
-		"SeeMeCNC RostockMAX v3.2 1.0 nozzle",
-		"SeeMeCNC RostockMAX v4 1.0 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.40mm Fine @SeeMeCNC Artemis 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 300 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.40mm Fine @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.40mm Fine @SeeMeCNC RostockMAX v4 1.0",
-		"0.50mm Standard @SeeMeCNC Artemis 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 300 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.50mm Standard @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.50mm Standard @SeeMeCNC RostockMAX v4 1.0",
-		"0.60mm Draft @SeeMeCNC Artemis 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 300 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.60mm Draft @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.60mm Draft @SeeMeCNC RostockMAX v4 1.0",
-		"0.70mm Extra Draft @SeeMeCNC Artemis 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 300 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.70mm Extra Draft @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.70mm Extra Draft @SeeMeCNC RostockMAX v4 1.0"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"7"
-	],
-	"filament_z_hop": [
-		"0.5"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"filament_id": "SMCFG00110"
-}
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_CF_0_4mm.json
+++ b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_CF_0_4mm.json
@@ -1,64 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PETG-CF 0.4 nozzle",
-	"inherits": "SeeMeCNC PETG-CF",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PETG-CF 0.4 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.4 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.4 nozzle",
-		"SeeMeCNC RostockMAX v4 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.16mm Fine @SeeMeCNC Artemis 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 300 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.16mm Fine @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.16mm Fine @SeeMeCNC RostockMAX v4 0.4",
-		"0.20mm Standard @SeeMeCNC Artemis 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 300 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.20mm Standard @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.20mm Standard @SeeMeCNC RostockMAX v4 0.4",
-		"0.24mm Draft @SeeMeCNC Artemis 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 300 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.24mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.24mm Draft @SeeMeCNC RostockMAX v4 0.4",
-		"0.28mm Extra Draft @SeeMeCNC Artemis 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 300 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.28mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.28mm Extra Draft @SeeMeCNC RostockMAX v4 0.4"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"5"
-	],
-	"filament_z_hop": [
-		"0.2"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"filament_id": "SMCFG00204"
-}
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_CF_0_5mm.json
+++ b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_CF_0_5mm.json
@@ -1,64 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PETG-CF 0.5 nozzle",
-	"inherits": "SeeMeCNC PETG-CF",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PETG-CF 0.5 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.5 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.5 nozzle",
-		"SeeMeCNC RostockMAX v4 0.5 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.20mm Fine @SeeMeCNC Artemis 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
-		"0.25mm Standard @SeeMeCNC Artemis 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.25mm Standard @SeeMeCNC RostockMAX v4 0.5",
-		"0.30mm Draft @SeeMeCNC Artemis 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 300 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.30mm Draft @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.30mm Draft @SeeMeCNC RostockMAX v4 0.5",
-		"0.35mm Extra Draft @SeeMeCNC Artemis 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 300 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.35mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.35mm Extra Draft @SeeMeCNC RostockMAX v4 0.5"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"5"
-	],
-	"filament_z_hop": [
-		"0.3"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"filament_id": "SMCFG00205"
-}
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_CF_0_7mm.json
+++ b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_CF_0_7mm.json
@@ -1,64 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PETG-CF 0.7 nozzle",
-	"inherits": "SeeMeCNC PETG-CF",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PETG-CF 0.7 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.7 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.7 nozzle",
-		"SeeMeCNC RostockMAX v4 0.7 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.28mm Fine @SeeMeCNC Artemis 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 300 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.28mm Fine @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.28mm Fine @SeeMeCNC RostockMAX v4 0.7",
-		"0.35mm Standard @SeeMeCNC Artemis 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 300 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.35mm Standard @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.35mm Standard @SeeMeCNC RostockMAX v4 0.7",
-		"0.42mm Draft @SeeMeCNC Artemis 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 300 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.42mm Draft @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.42mm Draft @SeeMeCNC RostockMAX v4 0.7",
-		"0.49mm Extra Draft @SeeMeCNC Artemis 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 300 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.49mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.49mm Extra Draft @SeeMeCNC RostockMAX v4 0.7"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"6"
-	],
-	"filament_z_hop": [
-		"0.4"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"filament_id": "SMCFG00207"
-}
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_CF_1_0mm.json
+++ b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PETG_CF_1_0mm.json
@@ -1,64 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PETG-CF 1.0 nozzle",
-	"inherits": "SeeMeCNC PETG-CF",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PETG-CF 1.0 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 300 1.0 nozzle",
-		"SeeMeCNC RostockMAX v3.2 1.0 nozzle",
-		"SeeMeCNC RostockMAX v4 1.0 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.40mm Fine @SeeMeCNC Artemis 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 300 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.40mm Fine @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.40mm Fine @SeeMeCNC RostockMAX v4 1.0",
-		"0.50mm Standard @SeeMeCNC Artemis 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 300 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.50mm Standard @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.50mm Standard @SeeMeCNC RostockMAX v4 1.0",
-		"0.60mm Draft @SeeMeCNC Artemis 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 300 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.60mm Draft @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.60mm Draft @SeeMeCNC RostockMAX v4 1.0",
-		"0.70mm Extra Draft @SeeMeCNC Artemis 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 300 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.70mm Extra Draft @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.70mm Extra Draft @SeeMeCNC RostockMAX v4 1.0"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"6"
-	],
-	"filament_z_hop": [
-		"0.5"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"filament_id": "SMCFG00210"
-}
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PLA.json
+++ b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PLA.json
@@ -443,17 +443,5 @@
 	"volumetric_speed_coefficients": [
 		""
 	],
-	"description": "SeeMeCNC configurations",
-	"filament_retraction_length": [
-		"5"
-	],
-	"filament_z_hop": [
-		"0.3"
-	],
-	"filament_retraction_speed": [
-		"45"
-	],
-	"filament_deretraction_speed": [
-		"35"
-	]
+	"description": "SeeMeCNC configurations"
 }
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PLA_0_4mm.json
+++ b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PLA_0_4mm.json
@@ -1,64 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PLA 0.4 nozzle",
-	"inherits": "SeeMeCNC PLA",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PLA 0.4 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.4 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.4 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.4 nozzle",
-		"SeeMeCNC RostockMAX v4 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.16mm Fine @SeeMeCNC Artemis 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 300 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.16mm Fine @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.16mm Fine @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.16mm Fine @SeeMeCNC RostockMAX v4 0.4",
-		"0.20mm Standard @SeeMeCNC Artemis 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 300 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.20mm Standard @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.20mm Standard @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.20mm Standard @SeeMeCNC RostockMAX v4 0.4",
-		"0.24mm Draft @SeeMeCNC Artemis 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 300 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.24mm Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.24mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.24mm Draft @SeeMeCNC RostockMAX v4 0.4",
-		"0.28mm Extra Draft @SeeMeCNC Artemis 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 300 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
-		"0.28mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
-		"0.28mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.4",
-		"0.28mm Extra Draft @SeeMeCNC RostockMAX v4 0.4"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"5"
-	],
-	"filament_z_hop": [
-		"0.2"
-	],
-	"filament_retraction_speed": [
-		"45"
-	],
-	"filament_deretraction_speed": [
-		"35"
-	],
-	"filament_id": "SMCFL00104"
-}
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PLA_0_5mm.json
+++ b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PLA_0_5mm.json
@@ -1,64 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PLA 0.5 nozzle",
-	"inherits": "SeeMeCNC PLA",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PLA 0.5 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.5 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.5 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.5 nozzle",
-		"SeeMeCNC RostockMAX v4 0.5 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.20mm Fine @SeeMeCNC Artemis 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
-		"0.25mm Standard @SeeMeCNC Artemis 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.25mm Standard @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.25mm Standard @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.25mm Standard @SeeMeCNC RostockMAX v4 0.5",
-		"0.30mm Draft @SeeMeCNC Artemis 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 300 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.30mm Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.30mm Draft @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.30mm Draft @SeeMeCNC RostockMAX v4 0.5",
-		"0.35mm Extra Draft @SeeMeCNC Artemis 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 300 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.5",
-		"0.35mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.5",
-		"0.35mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.5",
-		"0.35mm Extra Draft @SeeMeCNC RostockMAX v4 0.5"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"5"
-	],
-	"filament_z_hop": [
-		"0.3"
-	],
-	"filament_retraction_speed": [
-		"45"
-	],
-	"filament_deretraction_speed": [
-		"35"
-	],
-	"filament_id": "SMCFL00105"
-}
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PLA_0_7mm.json
+++ b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PLA_0_7mm.json
@@ -1,64 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PLA 0.7 nozzle",
-	"inherits": "SeeMeCNC PLA",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PLA 0.7 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.7 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.7 nozzle",
-		"SeeMeCNC RostockMAX v4 0.7 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.28mm Fine @SeeMeCNC Artemis 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 300 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.28mm Fine @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.28mm Fine @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.28mm Fine @SeeMeCNC RostockMAX v4 0.7",
-		"0.35mm Standard @SeeMeCNC Artemis 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 300 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.35mm Standard @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.35mm Standard @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.35mm Standard @SeeMeCNC RostockMAX v4 0.7",
-		"0.42mm Draft @SeeMeCNC Artemis 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 300 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.42mm Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.42mm Draft @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.42mm Draft @SeeMeCNC RostockMAX v4 0.7",
-		"0.49mm Extra Draft @SeeMeCNC Artemis 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 300 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.49mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.49mm Extra Draft @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.49mm Extra Draft @SeeMeCNC RostockMAX v4 0.7"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"6"
-	],
-	"filament_z_hop": [
-		"0.4"
-	],
-	"filament_retraction_speed": [
-		"45"
-	],
-	"filament_deretraction_speed": [
-		"35"
-	],
-	"filament_id": "SMCFL00107"
-}
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PLA_1_0mm.json
+++ b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_PLA_1_0mm.json
@@ -1,64 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC PLA 1.0 nozzle",
-	"inherits": "SeeMeCNC PLA",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC PLA 1.0 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 1.0 nozzle",
-		"SeeMeCNC BOSSdelta 300 1.0 nozzle",
-		"SeeMeCNC RostockMAX v3.2 1.0 nozzle",
-		"SeeMeCNC RostockMAX v4 1.0 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.40mm Fine @SeeMeCNC Artemis 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 300 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.40mm Fine @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.40mm Fine @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.40mm Fine @SeeMeCNC RostockMAX v4 1.0",
-		"0.50mm Standard @SeeMeCNC Artemis 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 300 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.50mm Standard @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.50mm Standard @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.50mm Standard @SeeMeCNC RostockMAX v4 1.0",
-		"0.60mm Draft @SeeMeCNC Artemis 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 300 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.60mm Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.60mm Draft @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.60mm Draft @SeeMeCNC RostockMAX v4 1.0",
-		"0.70mm Extra Draft @SeeMeCNC Artemis 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 300 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0505 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0510 1.0",
-		"0.70mm Extra Draft @SeeMeCNC BOSSdelta 500 0521 1.0",
-		"0.70mm Extra Draft @SeeMeCNC RostockMAX v3.2 1.0",
-		"0.70mm Extra Draft @SeeMeCNC RostockMAX v4 1.0"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"6"
-	],
-	"filament_z_hop": [
-		"0.5"
-	],
-	"filament_retraction_speed": [
-		"45"
-	],
-	"filament_deretraction_speed": [
-		"35"
-	],
-	"filament_id": "SMCFL00110"
-}
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_TPU.json
+++ b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_TPU.json
@@ -141,13 +141,13 @@
 		"60"
 	],
 	"filament_retraction_length": [
-		"6"
+		"20"
 	],
 	"filament_retraction_speed": [
-		"30"
+		"120"
 	],
 	"filament_deretraction_speed": [
-		"25"
+		"120"
 	],
 	"filament_retraction_minimum_travel": [
 		"15"
@@ -162,7 +162,7 @@
 		"0"
 	],
 	"filament_z_hop": [
-		"0.3"
+		"0"
 	],
 	"filament_z_hop_types": [
 		"Normal Lift"
--- a/resources/profiles/SeeMeCNC/filament/SeeMeCNC_TPU_0_7mm.json
+++ b/resources/profiles/SeeMeCNC/filament/SeeMeCNC_TPU_0_7mm.json
@@ -1,50 +0,0 @@
-{
-	"type": "filament",
-	"name": "SeeMeCNC TPU 0.7 nozzle",
-	"inherits": "SeeMeCNC TPU",
-	"from": "System",
-	"instantiation": "true",
-	"filament_settings_id": [
-		"SeeMeCNC TPU 0.7 nozzle"
-	],
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0505 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0510 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 500 0521 0.7 nozzle",
-		"SeeMeCNC BOSSdelta 300 0.7 nozzle",
-		"SeeMeCNC RostockMAX v3.2 0.7 nozzle",
-		"SeeMeCNC RostockMAX v4 0.7 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"compatible_prints": [
-		"0.30mm TPU Solid @SeeMeCNC Artemis 0.7",
-		"0.30mm TPU Solid @SeeMeCNC BOSSdelta 300 0.7",
-		"0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.30mm TPU Solid @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.30mm TPU Solid @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.30mm TPU Solid @SeeMeCNC RostockMAX v4 0.7",
-		"0.35mm TPU Vase @SeeMeCNC Artemis 0.7",
-		"0.35mm TPU Vase @SeeMeCNC BOSSdelta 300 0.7",
-		"0.35mm TPU Vase @SeeMeCNC BOSSdelta 500 0505 0.7",
-		"0.35mm TPU Vase @SeeMeCNC BOSSdelta 500 0510 0.7",
-		"0.35mm TPU Vase @SeeMeCNC BOSSdelta 500 0521 0.7",
-		"0.35mm TPU Vase @SeeMeCNC RostockMAX v3.2 0.7",
-		"0.35mm TPU Vase @SeeMeCNC RostockMAX v4 0.7"
-	],
-	"compatible_prints_condition": "",
-	"filament_retraction_length": [
-		"7"
-	],
-	"filament_z_hop": [
-		"0.3"
-	],
-	"filament_retraction_speed": [
-		"30"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"filament_id": "SMCFU00107"
-}
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_4mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_4mm.json
@@ -348,4 +348,4 @@
 	"model": "SeeMeCNC Artemis 300",
 	"thumbnail": "SeeMeCNC Artemis 300_cover.png",
 	"description": "SeeMeCNC configurations"
-}
+}
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_5mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_5mm.json
@@ -348,4 +348,4 @@
 	"model": "SeeMeCNC Artemis 300",
 	"thumbnail": "SeeMeCNC Artemis 300_cover.png",
 	"description": "SeeMeCNC configurations"
-}
+}
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_7mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_7mm.json
@@ -348,4 +348,4 @@
 	"model": "SeeMeCNC Artemis 300",
 	"thumbnail": "SeeMeCNC Artemis 300_cover.png",
 	"description": "SeeMeCNC configurations"
-}
+}
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_1_0mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_1_0mm.json
@@ -348,4 +348,4 @@
 	"model": "SeeMeCNC Artemis 300",
 	"thumbnail": "SeeMeCNC Artemis 300_cover.png",
 	"description": "SeeMeCNC configurations"
-}
+}
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_4mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_4mm.json
@@ -348,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 500 0505",
 	"thumbnail": "SeeMeCNC BOSSdelta 500 0505_cover.png",
 	"description": "SeeMeCNC configurations"
-}
+}
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_5mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_5mm.json
@@ -348,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 500 0505",
 	"thumbnail": "SeeMeCNC BOSSdelta 500 0505_cover.png",
 	"description": "SeeMeCNC configurations"
-}
+}
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_7mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_7mm.json
@@ -348,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 500 0505",
 	"thumbnail": "SeeMeCNC BOSSdelta 500 0505_cover.png",
 	"description": "SeeMeCNC configurations"
-}
+}
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_1_0mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_1_0mm.json
@@ -348,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 500 0505",
 	"thumbnail": "SeeMeCNC BOSSdelta 500 0505_cover.png",
 	"description": "SeeMeCNC configurations"
-}
+}
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_4mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_4mm.json
@@ -348,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 500 0510",
 	"thumbnail": "SeeMeCNC BOSSdelta 500 0510_cover.png",
 	"description": "SeeMeCNC configurations"
-}
+}
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_5mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_5mm.json
@@ -348,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 500 0510",
 	"thumbnail": "SeeMeCNC BOSSdelta 500 0510_cover.png",
 	"description": "SeeMeCNC configurations"
-}
+}
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_7mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_7mm.json
@@ -348,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 500 0510",
 	"thumbnail": "SeeMeCNC BOSSdelta 500 0510_cover.png",
 	"description": "SeeMeCNC configurations"
-}
+}
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_1_0mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_1_0mm.json
@@ -348,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 500 0510",
 	"thumbnail": "SeeMeCNC BOSSdelta 500 0510_cover.png",
 	"description": "SeeMeCNC configurations"
-}
+}
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_4mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_4mm.json
@@ -348,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 500 0521",
 	"thumbnail": "SeeMeCNC BOSSdelta 500 0521_cover.png",
 	"description": "SeeMeCNC configurations"
-}
+}
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_5mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_5mm.json
@@ -348,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 500 0521",
 	"thumbnail": "SeeMeCNC BOSSdelta 500 0521_cover.png",
 	"description": "SeeMeCNC configurations"
-}
+}
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_7mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_7mm.json
@@ -348,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 500 0521",
 	"thumbnail": "SeeMeCNC BOSSdelta 500 0521_cover.png",
 	"description": "SeeMeCNC configurations"
-}
+}
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_1_0mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_1_0mm.json
@@ -348,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 500 0521",
 	"thumbnail": "SeeMeCNC BOSSdelta 500 0521_cover.png",
 	"description": "SeeMeCNC configurations"
-}
+}
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_4mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_4mm.json
@@ -348,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 300",
 	"thumbnail": "SeeMeCNC BOSSdelta 300_cover.png",
 	"description": "SeeMeCNC configurations"
-}
+}
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_5mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_5mm.json
@@ -348,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 300",
 	"thumbnail": "SeeMeCNC BOSSdelta 300_cover.png",
 	"description": "SeeMeCNC configurations"
-}
+}
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_7mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_7mm.json
@@ -348,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 300",
 	"thumbnail": "SeeMeCNC BOSSdelta 300_cover.png",
 	"description": "SeeMeCNC configurations"
-}
+}
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_1_0mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_1_0mm.json
@@ -348,4 +348,4 @@
 	"model": "SeeMeCNC BOSSdelta 300",
 	"thumbnail": "SeeMeCNC BOSSdelta 300_cover.png",
 	"description": "SeeMeCNC configurations"
-}
+}
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_4mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_4mm.json
@@ -348,4 +348,4 @@
 	"model": "SeeMeCNC RostockMAX v3.2",
 	"thumbnail": "SeeMeCNC RostockMAX v3.2_cover.png",
 	"description": "SeeMeCNC configurations"
-}
+}
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_5mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_5mm.json
@@ -348,4 +348,4 @@
 	"model": "SeeMeCNC RostockMAX v3.2",
 	"thumbnail": "SeeMeCNC RostockMAX v3.2_cover.png",
 	"description": "SeeMeCNC configurations"
-}
+}
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_7mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_7mm.json
@@ -348,4 +348,4 @@
 	"model": "SeeMeCNC RostockMAX v3.2",
 	"thumbnail": "SeeMeCNC RostockMAX v3.2_cover.png",
 	"description": "SeeMeCNC configurations"
-}
+}
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_1_0mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_1_0mm.json
@@ -348,4 +348,4 @@
 	"model": "SeeMeCNC RostockMAX v3.2",
 	"thumbnail": "SeeMeCNC RostockMAX v3.2_cover.png",
 	"description": "SeeMeCNC configurations"
-}
+}
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_4mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_4mm.json
@@ -348,4 +348,4 @@
 	"model": "SeeMeCNC RostockMAX v4",
 	"thumbnail": "SeeMeCNC RostockMAX v4_cover.png",
 	"description": "SeeMeCNC configurations"
-}
+}
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_5mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_5mm.json
@@ -348,4 +348,4 @@
 	"model": "SeeMeCNC RostockMAX v4",
 	"thumbnail": "SeeMeCNC RostockMAX v4_cover.png",
 	"description": "SeeMeCNC configurations"
-}
+}
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_7mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_7mm.json
@@ -348,4 +348,4 @@
 	"model": "SeeMeCNC RostockMAX v4",
 	"thumbnail": "SeeMeCNC RostockMAX v4_cover.png",
 	"description": "SeeMeCNC configurations"
-}
+}
--- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_1_0mm.json
+++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_1_0mm.json
@@ -348,4 +348,4 @@
 	"model": "SeeMeCNC RostockMAX v4",
 	"thumbnail": "SeeMeCNC RostockMAX v4_cover.png",
 	"description": "SeeMeCNC configurations"
-}
+}
--- a/resources/profiles/SeeMeCNC/process/0.16mm
+++ b/resources/profiles/SeeMeCNC/process/0.16mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.16mm Fine @SeeMeCNC Artemis 0.4",
-	"inherits": "SeeMeCNC process base 0.4mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.16mm Fine @SeeMeCNC Artemis 0.4",
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.2",
-	"layer_height": "0.16",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.16mm Fine @SeeMeCNC Artemis 0.4",
+    "inherits": "SeeMeCNC process base 0.4mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.16mm Fine @SeeMeCNC Artemis 0.4",
+    "compatible_printers": [
+        "SeeMeCNC Artemis 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.16",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.16mm
+++ b/resources/profiles/SeeMeCNC/process/0.16mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.16mm Fine @SeeMeCNC BOSSdelta 300 0.4",
-	"inherits": "SeeMeCNC process base 0.4mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.16mm Fine @SeeMeCNC BOSSdelta 300 0.4",
-	"compatible_printers": [
-		"SeeMeCNC BOSSdelta 300 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.2",
-	"layer_height": "0.16",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.16mm Fine @SeeMeCNC BOSSdelta 300 0.4",
+    "inherits": "SeeMeCNC process base 0.4mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.16mm Fine @SeeMeCNC BOSSdelta 300 0.4",
+    "compatible_printers": [
+        "SeeMeCNC BOSSdelta 300 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.16",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.16mm
+++ b/resources/profiles/SeeMeCNC/process/0.16mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.16mm Fine @SeeMeCNC BOSSdelta 500 0505 0.4",
-	"inherits": "SeeMeCNC process base 0.4mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.16mm Fine @SeeMeCNC BOSSdelta 500 0505 0.4",
-	"compatible_printers": [
-		"SeeMeCNC BOSSdelta 500 0505 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.2",
-	"layer_height": "0.16",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.16mm Fine @SeeMeCNC BOSSdelta 500 0505 0.4",
+    "inherits": "SeeMeCNC process base 0.4mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.16mm Fine @SeeMeCNC BOSSdelta 500 0505 0.4",
+    "compatible_printers": [
+        "SeeMeCNC BOSSdelta 500 0505 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.16",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.16mm
+++ b/resources/profiles/SeeMeCNC/process/0.16mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.16mm Fine @SeeMeCNC BOSSdelta 500 0510 0.4",
-	"inherits": "SeeMeCNC process base 0.4mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.16mm Fine @SeeMeCNC BOSSdelta 500 0510 0.4",
-	"compatible_printers": [
-		"SeeMeCNC BOSSdelta 500 0510 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.2",
-	"layer_height": "0.16",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.16mm Fine @SeeMeCNC BOSSdelta 500 0510 0.4",
+    "inherits": "SeeMeCNC process base 0.4mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.16mm Fine @SeeMeCNC BOSSdelta 500 0510 0.4",
+    "compatible_printers": [
+        "SeeMeCNC BOSSdelta 500 0510 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.16",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.16mm
+++ b/resources/profiles/SeeMeCNC/process/0.16mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.16mm Fine @SeeMeCNC BOSSdelta 500 0521 0.4",
-	"inherits": "SeeMeCNC process base 0.4mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.16mm Fine @SeeMeCNC BOSSdelta 500 0521 0.4",
-	"compatible_printers": [
-		"SeeMeCNC BOSSdelta 500 0521 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.2",
-	"layer_height": "0.16",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.16mm Fine @SeeMeCNC BOSSdelta 500 0521 0.4",
+    "inherits": "SeeMeCNC process base 0.4mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.16mm Fine @SeeMeCNC BOSSdelta 500 0521 0.4",
+    "compatible_printers": [
+        "SeeMeCNC BOSSdelta 500 0521 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.16",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.16mm
+++ b/resources/profiles/SeeMeCNC/process/0.16mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.16mm Fine @SeeMeCNC RostockMAX v3.2 0.4",
-	"inherits": "SeeMeCNC process base 0.4mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.16mm Fine @SeeMeCNC RostockMAX v3.2 0.4",
-	"compatible_printers": [
-		"SeeMeCNC RostockMAX v3.2 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.2",
-	"layer_height": "0.16",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.16mm Fine @SeeMeCNC RostockMAX v3.2 0.4",
+    "inherits": "SeeMeCNC process base 0.4mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.16mm Fine @SeeMeCNC RostockMAX v3.2 0.4",
+    "compatible_printers": [
+        "SeeMeCNC RostockMAX v3.2 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.16",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.16mm
+++ b/resources/profiles/SeeMeCNC/process/0.16mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.16mm Fine @SeeMeCNC RostockMAX v4 0.4",
-	"inherits": "SeeMeCNC process base 0.4mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.16mm Fine @SeeMeCNC RostockMAX v4 0.4",
-	"compatible_printers": [
-		"SeeMeCNC RostockMAX v4 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.2",
-	"layer_height": "0.16",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.16mm Fine @SeeMeCNC RostockMAX v4 0.4",
+    "inherits": "SeeMeCNC process base 0.4mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.16mm Fine @SeeMeCNC RostockMAX v4 0.4",
+    "compatible_printers": [
+        "SeeMeCNC RostockMAX v4 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.16",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.20mm
+++ b/resources/profiles/SeeMeCNC/process/0.20mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.20mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
-	"inherits": "SeeMeCNC process base 0.4mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.20mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
-	"compatible_printers": [
-		"SeeMeCNC RostockMAX v3.2 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.2",
-	"layer_height": "0.2",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.20mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
+    "inherits": "SeeMeCNC process base 0.4mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.20mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
+    "compatible_printers": [
+        "SeeMeCNC RostockMAX v3.2 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.2",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.20mm
+++ b/resources/profiles/SeeMeCNC/process/0.20mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.20mm Fine @SeeMeCNC Artemis 0.5",
-	"inherits": "SeeMeCNC process base 0.5mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.20mm Fine @SeeMeCNC Artemis 0.5",
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.5 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.25",
-	"layer_height": "0.2",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.20mm Fine @SeeMeCNC Artemis 0.5",
+    "inherits": "SeeMeCNC process base 0.5mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.20mm Fine @SeeMeCNC Artemis 0.5",
+    "compatible_printers": [
+        "SeeMeCNC Artemis 0.5 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.25",
+    "layer_height": "0.2",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.20mm
+++ b/resources/profiles/SeeMeCNC/process/0.20mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
-	"inherits": "SeeMeCNC process base 0.5mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
-	"compatible_printers": [
-		"SeeMeCNC BOSSdelta 300 0.5 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.25",
-	"layer_height": "0.2",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
+    "inherits": "SeeMeCNC process base 0.5mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.20mm Fine @SeeMeCNC BOSSdelta 300 0.5",
+    "compatible_printers": [
+        "SeeMeCNC BOSSdelta 300 0.5 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.25",
+    "layer_height": "0.2",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.20mm
+++ b/resources/profiles/SeeMeCNC/process/0.20mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
-	"inherits": "SeeMeCNC process base 0.5mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
-	"compatible_printers": [
-		"SeeMeCNC BOSSdelta 500 0505 0.5 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.25",
-	"layer_height": "0.2",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
+    "inherits": "SeeMeCNC process base 0.5mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0505 0.5",
+    "compatible_printers": [
+        "SeeMeCNC BOSSdelta 500 0505 0.5 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.25",
+    "layer_height": "0.2",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.20mm
+++ b/resources/profiles/SeeMeCNC/process/0.20mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
-	"inherits": "SeeMeCNC process base 0.5mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
-	"compatible_printers": [
-		"SeeMeCNC BOSSdelta 500 0510 0.5 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.25",
-	"layer_height": "0.2",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
+    "inherits": "SeeMeCNC process base 0.5mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0510 0.5",
+    "compatible_printers": [
+        "SeeMeCNC BOSSdelta 500 0510 0.5 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.25",
+    "layer_height": "0.2",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.20mm
+++ b/resources/profiles/SeeMeCNC/process/0.20mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
-	"inherits": "SeeMeCNC process base 0.5mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
-	"compatible_printers": [
-		"SeeMeCNC BOSSdelta 500 0521 0.5 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.25",
-	"layer_height": "0.2",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
+    "inherits": "SeeMeCNC process base 0.5mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.20mm Fine @SeeMeCNC BOSSdelta 500 0521 0.5",
+    "compatible_printers": [
+        "SeeMeCNC BOSSdelta 500 0521 0.5 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.25",
+    "layer_height": "0.2",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.20mm
+++ b/resources/profiles/SeeMeCNC/process/0.20mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
-	"inherits": "SeeMeCNC process base 0.5mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
-	"compatible_printers": [
-		"SeeMeCNC RostockMAX v3.2 0.5 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.25",
-	"layer_height": "0.2",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
+    "inherits": "SeeMeCNC process base 0.5mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.20mm Fine @SeeMeCNC RostockMAX v3.2 0.5",
+    "compatible_printers": [
+        "SeeMeCNC RostockMAX v3.2 0.5 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.25",
+    "layer_height": "0.2",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.20mm
+++ b/resources/profiles/SeeMeCNC/process/0.20mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
-	"inherits": "SeeMeCNC process base 0.5mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
-	"compatible_printers": [
-		"SeeMeCNC RostockMAX v4 0.5 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.25",
-	"layer_height": "0.2",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
+    "inherits": "SeeMeCNC process base 0.5mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.20mm Fine @SeeMeCNC RostockMAX v4 0.5",
+    "compatible_printers": [
+        "SeeMeCNC RostockMAX v4 0.5 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.25",
+    "layer_height": "0.2",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.20mm
+++ b/resources/profiles/SeeMeCNC/process/0.20mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.20mm Standard @SeeMeCNC Artemis 0.4",
-	"inherits": "SeeMeCNC process base 0.4mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.20mm Standard @SeeMeCNC Artemis 0.4",
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.2",
-	"layer_height": "0.2",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.20mm Standard @SeeMeCNC Artemis 0.4",
+    "inherits": "SeeMeCNC process base 0.4mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.20mm Standard @SeeMeCNC Artemis 0.4",
+    "compatible_printers": [
+        "SeeMeCNC Artemis 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.2",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.20mm
+++ b/resources/profiles/SeeMeCNC/process/0.20mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.20mm Standard @SeeMeCNC BOSSdelta 300 0.4",
-	"inherits": "SeeMeCNC process base 0.4mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.20mm Standard @SeeMeCNC BOSSdelta 300 0.4",
-	"compatible_printers": [
-		"SeeMeCNC BOSSdelta 300 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.2",
-	"layer_height": "0.2",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.20mm Standard @SeeMeCNC BOSSdelta 300 0.4",
+    "inherits": "SeeMeCNC process base 0.4mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.20mm Standard @SeeMeCNC BOSSdelta 300 0.4",
+    "compatible_printers": [
+        "SeeMeCNC BOSSdelta 300 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.2",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.20mm
+++ b/resources/profiles/SeeMeCNC/process/0.20mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.20mm Standard @SeeMeCNC BOSSdelta 500 0505 0.4",
-	"inherits": "SeeMeCNC process base 0.4mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.20mm Standard @SeeMeCNC BOSSdelta 500 0505 0.4",
-	"compatible_printers": [
-		"SeeMeCNC BOSSdelta 500 0505 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.2",
-	"layer_height": "0.2",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.20mm Standard @SeeMeCNC BOSSdelta 500 0505 0.4",
+    "inherits": "SeeMeCNC process base 0.4mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.20mm Standard @SeeMeCNC BOSSdelta 500 0505 0.4",
+    "compatible_printers": [
+        "SeeMeCNC BOSSdelta 500 0505 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.2",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.20mm
+++ b/resources/profiles/SeeMeCNC/process/0.20mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.20mm Standard @SeeMeCNC BOSSdelta 500 0510 0.4",
-	"inherits": "SeeMeCNC process base 0.4mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.20mm Standard @SeeMeCNC BOSSdelta 500 0510 0.4",
-	"compatible_printers": [
-		"SeeMeCNC BOSSdelta 500 0510 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.2",
-	"layer_height": "0.2",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.20mm Standard @SeeMeCNC BOSSdelta 500 0510 0.4",
+    "inherits": "SeeMeCNC process base 0.4mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.20mm Standard @SeeMeCNC BOSSdelta 500 0510 0.4",
+    "compatible_printers": [
+        "SeeMeCNC BOSSdelta 500 0510 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.2",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.20mm
+++ b/resources/profiles/SeeMeCNC/process/0.20mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.20mm Standard @SeeMeCNC BOSSdelta 500 0521 0.4",
-	"inherits": "SeeMeCNC process base 0.4mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.20mm Standard @SeeMeCNC BOSSdelta 500 0521 0.4",
-	"compatible_printers": [
-		"SeeMeCNC BOSSdelta 500 0521 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.2",
-	"layer_height": "0.2",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.20mm Standard @SeeMeCNC BOSSdelta 500 0521 0.4",
+    "inherits": "SeeMeCNC process base 0.4mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.20mm Standard @SeeMeCNC BOSSdelta 500 0521 0.4",
+    "compatible_printers": [
+        "SeeMeCNC BOSSdelta 500 0521 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.2",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.20mm
+++ b/resources/profiles/SeeMeCNC/process/0.20mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.20mm Standard @SeeMeCNC RostockMAX v3.2 0.4",
-	"inherits": "SeeMeCNC process base 0.4mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.20mm Standard @SeeMeCNC RostockMAX v3.2 0.4",
-	"compatible_printers": [
-		"SeeMeCNC RostockMAX v3.2 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.2",
-	"layer_height": "0.2",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.20mm Standard @SeeMeCNC RostockMAX v3.2 0.4",
+    "inherits": "SeeMeCNC process base 0.4mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.20mm Standard @SeeMeCNC RostockMAX v3.2 0.4",
+    "compatible_printers": [
+        "SeeMeCNC RostockMAX v3.2 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.2",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.20mm
+++ b/resources/profiles/SeeMeCNC/process/0.20mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.20mm Standard @SeeMeCNC RostockMAX v4 0.4",
-	"inherits": "SeeMeCNC process base 0.4mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.20mm Standard @SeeMeCNC RostockMAX v4 0.4",
-	"compatible_printers": [
-		"SeeMeCNC RostockMAX v4 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.2",
-	"layer_height": "0.2",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.20mm Standard @SeeMeCNC RostockMAX v4 0.4",
+    "inherits": "SeeMeCNC process base 0.4mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.20mm Standard @SeeMeCNC RostockMAX v4 0.4",
+    "compatible_printers": [
+        "SeeMeCNC RostockMAX v4 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.2",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.24mm
+++ b/resources/profiles/SeeMeCNC/process/0.24mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.24mm Draft @SeeMeCNC Artemis 0.4",
-	"inherits": "SeeMeCNC process base 0.4mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.24mm Draft @SeeMeCNC Artemis 0.4",
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.2",
-	"layer_height": "0.24",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.24mm Draft @SeeMeCNC Artemis 0.4",
+    "inherits": "SeeMeCNC process base 0.4mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.24mm Draft @SeeMeCNC Artemis 0.4",
+    "compatible_printers": [
+        "SeeMeCNC Artemis 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.24",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.24mm
+++ b/resources/profiles/SeeMeCNC/process/0.24mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.24mm Draft @SeeMeCNC BOSSdelta 300 0.4",
-	"inherits": "SeeMeCNC process base 0.4mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.24mm Draft @SeeMeCNC BOSSdelta 300 0.4",
-	"compatible_printers": [
-		"SeeMeCNC BOSSdelta 300 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.2",
-	"layer_height": "0.24",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.24mm Draft @SeeMeCNC BOSSdelta 300 0.4",
+    "inherits": "SeeMeCNC process base 0.4mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.24mm Draft @SeeMeCNC BOSSdelta 300 0.4",
+    "compatible_printers": [
+        "SeeMeCNC BOSSdelta 300 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.24",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.24mm
+++ b/resources/profiles/SeeMeCNC/process/0.24mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.24mm Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
-	"inherits": "SeeMeCNC process base 0.4mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.24mm Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
-	"compatible_printers": [
-		"SeeMeCNC BOSSdelta 500 0505 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.2",
-	"layer_height": "0.24",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.24mm Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
+    "inherits": "SeeMeCNC process base 0.4mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.24mm Draft @SeeMeCNC BOSSdelta 500 0505 0.4",
+    "compatible_printers": [
+        "SeeMeCNC BOSSdelta 500 0505 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.24",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.24mm
+++ b/resources/profiles/SeeMeCNC/process/0.24mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.24mm Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
-	"inherits": "SeeMeCNC process base 0.4mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.24mm Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
-	"compatible_printers": [
-		"SeeMeCNC BOSSdelta 500 0510 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.2",
-	"layer_height": "0.24",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.24mm Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
+    "inherits": "SeeMeCNC process base 0.4mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.24mm Draft @SeeMeCNC BOSSdelta 500 0510 0.4",
+    "compatible_printers": [
+        "SeeMeCNC BOSSdelta 500 0510 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.24",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.24mm
+++ b/resources/profiles/SeeMeCNC/process/0.24mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.24mm Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
-	"inherits": "SeeMeCNC process base 0.4mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.24mm Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
-	"compatible_printers": [
-		"SeeMeCNC BOSSdelta 500 0521 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.2",
-	"layer_height": "0.24",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.24mm Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
+    "inherits": "SeeMeCNC process base 0.4mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.24mm Draft @SeeMeCNC BOSSdelta 500 0521 0.4",
+    "compatible_printers": [
+        "SeeMeCNC BOSSdelta 500 0521 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.24",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.24mm
+++ b/resources/profiles/SeeMeCNC/process/0.24mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.24mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
-	"inherits": "SeeMeCNC process base 0.4mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.24mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
-	"compatible_printers": [
-		"SeeMeCNC RostockMAX v3.2 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.2",
-	"layer_height": "0.24",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.24mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
+    "inherits": "SeeMeCNC process base 0.4mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.24mm Draft @SeeMeCNC RostockMAX v3.2 0.4",
+    "compatible_printers": [
+        "SeeMeCNC RostockMAX v3.2 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.24",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.24mm
+++ b/resources/profiles/SeeMeCNC/process/0.24mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.24mm Draft @SeeMeCNC RostockMAX v4 0.4",
-	"inherits": "SeeMeCNC process base 0.4mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.24mm Draft @SeeMeCNC RostockMAX v4 0.4",
-	"compatible_printers": [
-		"SeeMeCNC RostockMAX v4 0.4 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.2",
-	"layer_height": "0.24",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.24mm Draft @SeeMeCNC RostockMAX v4 0.4",
+    "inherits": "SeeMeCNC process base 0.4mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.24mm Draft @SeeMeCNC RostockMAX v4 0.4",
+    "compatible_printers": [
+        "SeeMeCNC RostockMAX v4 0.4 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.2",
+    "layer_height": "0.24",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.25mm
+++ b/resources/profiles/SeeMeCNC/process/0.25mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.25mm Standard @SeeMeCNC Artemis 0.5",
-	"inherits": "SeeMeCNC process base 0.5mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.25mm Standard @SeeMeCNC Artemis 0.5",
-	"compatible_printers": [
-		"SeeMeCNC Artemis 0.5 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.25",
-	"layer_height": "0.25",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.25mm Standard @SeeMeCNC Artemis 0.5",
+    "inherits": "SeeMeCNC process base 0.5mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.25mm Standard @SeeMeCNC Artemis 0.5",
+    "compatible_printers": [
+        "SeeMeCNC Artemis 0.5 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.25",
+    "layer_height": "0.25",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.25mm
+++ b/resources/profiles/SeeMeCNC/process/0.25mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
-	"inherits": "SeeMeCNC process base 0.5mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
-	"compatible_printers": [
-		"SeeMeCNC BOSSdelta 300 0.5 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.25",
-	"layer_height": "0.25",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
+    "inherits": "SeeMeCNC process base 0.5mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.25mm Standard @SeeMeCNC BOSSdelta 300 0.5",
+    "compatible_printers": [
+        "SeeMeCNC BOSSdelta 300 0.5 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.25",
+    "layer_height": "0.25",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.25mm
+++ b/resources/profiles/SeeMeCNC/process/0.25mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
-	"inherits": "SeeMeCNC process base 0.5mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
-	"compatible_printers": [
-		"SeeMeCNC BOSSdelta 500 0505 0.5 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.25",
-	"layer_height": "0.25",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
+    "inherits": "SeeMeCNC process base 0.5mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0505 0.5",
+    "compatible_printers": [
+        "SeeMeCNC BOSSdelta 500 0505 0.5 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.25",
+    "layer_height": "0.25",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/resources/profiles/SeeMeCNC/process/0.25mm
+++ b/resources/profiles/SeeMeCNC/process/0.25mm
@@ -1,20 +1,20 @@
 {
-	"type": "process",
-	"name": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
-	"inherits": "SeeMeCNC process base 0.5mm",
-	"from": "System",
-	"instantiation": "true",
-	"print_settings_id": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
-	"compatible_printers": [
-		"SeeMeCNC BOSSdelta 500 0510 0.5 nozzle"
-	],
-	"compatible_printers_condition": "",
-	"alternate_extra_wall": "0",
-	"counterbore_hole_bridging": "none",
-	"initial_layer_print_height": "0.25",
-	"layer_height": "0.25",
-	"precise_z_height": "0",
-	"skirt_distance": "2",
-	"skirt_loops": "0",
-	"spiral_mode": "0"
+    "type": "process",
+    "name": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
+    "inherits": "SeeMeCNC process base 0.5mm",
+    "from": "System",
+    "instantiation": "true",
+    "print_settings_id": "0.25mm Standard @SeeMeCNC BOSSdelta 500 0510 0.5",
+    "compatible_printers": [
+        "SeeMeCNC BOSSdelta 500 0510 0.5 nozzle"
+    ],
+    "compatible_printers_condition": "",
+    "alternate_extra_wall": "0",
+    "counterbore_hole_bridging": "none",
+    "initial_layer_print_height": "0.25",
+    "layer_height": "0.25",
+    "precise_z_height": "0",
+    "skirt_distance": "2",
+    "skirt_loops": "0",
+    "spiral_mode": "0"
 }
--- a/Show More
+++ b/Show More