Post clang-tidy's Fix as Review Suggestions Instead of Pushing It

A failed clang-tidy check now runs once more with --fix and uploads the
patch as the clang-tidy-fix artifact; the check still fails. /bot
fix-tidy downloads that patch for the PR's latest commit, checks it adds
only includes to C++ files the PR changes, and posts one review: a
one-click suggestion for each include on a line the PR's diff shows, and
the whole patch with a git apply command. Nothing is pushed and no PR
code runs in the bot, so the PR's author can run it too and no token is
needed.

.github/workflows/clang_tidy.yml

@@ -3,7 +3,8 @@ name: clang-tidy
 # Runs clang-tidy, with the checks in .clang-tidy, over the C++ lines a pull
 # request changes (scripts/clang_tidy_diff.py). The compile database is
 # configured without the precompiled header, so code that only builds because
-# the PCH supplied an include fails here.
+# the PCH supplied an include fails here. A failed check also uploads the
+# missing-include fixes, which /bot fix-tidy (pr-tidy-bot.yml) posts on the PR.
 #
 # No paths filter: the job is a required check, and a workflow skipped by a
 # paths filter leaves a required check pending forever. A PR with no C++
@@ -83,7 +84,34 @@ jobs:
         run: cmake --build build-tidy --target git_commit_hash_header
 
       - name: Run clang-tidy on the changed lines
+        id: tidy
         if: steps.changes.outputs.cpp == 'true'
         run: >
           python3 scripts/clang_tidy_diff.py -p build-tidy --base HEAD^1
           --clang-tidy "$RUNNER_TEMP/clang-tidy/bin/clang-tidy" -j "$(nproc)"
+
+      # The fixes for a failed check, for /bot fix-tidy (pr-tidy-bot.yml) to post on
+      # the PR. They go into the patch only, so the check still fails. The status
+      # says whether findings remain that --fix cannot fix.
+      - name: Make the fix patch
+        id: fix
+        if: failure() && steps.tidy.outcome == 'failure'
+        run: |
+          mkdir -p "$RUNNER_TEMP/clang-tidy-fix"
+          status=0
+          python3 scripts/clang_tidy_diff.py -p build-tidy --base HEAD^1 \
+            --clang-tidy "$RUNNER_TEMP/clang-tidy/bin/clang-tidy" -j "$(nproc)" -- --fix > /dev/null || status=$?
+          echo "$status" > "$RUNNER_TEMP/clang-tidy-fix/status"
+          git -c core.quotePath=false diff --no-color --no-ext-diff --src-prefix=a/ --dst-prefix=b/ \
+            > "$RUNNER_TEMP/clang-tidy-fix/fix.patch"
+          if [ -s "$RUNNER_TEMP/clang-tidy-fix/fix.patch" ]; then
+            echo "patch=true" >> "$GITHUB_OUTPUT"
+          fi
+
+      - name: Upload the fix patch
+        if: failure() && steps.fix.outputs.patch == 'true'
+        uses: actions/upload-artifact@v7
+        with:
+          name: clang-tidy-fix
+          path: ${{ runner.temp }}/clang-tidy-fix/
+          retention-days: 30

.github/workflows/pr-tidy-bot.yml

@@ -0,0 +1,340 @@
+name: PR clang-tidy Bot
+
+# Posts the includes the clang-tidy check reports missing, on request, as a
+# review the PR's author can apply.
+#
+# Command, posted as a comment on the PR by its author or an account with write
+# access:
+#   /bot fix-tidy
+#
+# The fix comes from the clang-tidy check's own run on the PR's latest commit:
+# when the check fails, clang_tidy.yml runs it again with --fix and uploads the
+# result as the clang-tidy-fix artifact. Findings --fix cannot fix, such as a
+# using in a header, are left for the check to report.
+#
+# The reply is one review. Each include whose place falls on a line the PR's
+# diff shows is a suggestion GitHub can commit in one click, and the review's
+# body holds the whole patch with a git apply command for the rest. Nothing is
+# pushed, and no code from the PR runs here: the patch is only accepted when
+# every line it adds is an #include in a C++ file the PR already changes.
+
+on:
+  issue_comment:
+    types:
+      - created
+
+permissions: {}
+
+jobs:
+  suggest:
+    # Skips the job unless a PR comment mentions the command.
+    if: >-
+      github.repository == 'OrcaSlicer/OrcaSlicer'
+      && github.event.issue.pull_request != null
+      && contains(github.event.comment.body, '/bot fix-tidy')
+    concurrency:
+      group: ${{ github.workflow }}-${{ github.event.issue.number }}
+      cancel-in-progress: false
+    permissions:
+      actions: read          # find the check's run and download its patch
+      contents: read         # check out the PR head
+      pull-requests: write   # the review
+      issues: write          # feedback comment + reactions
+    runs-on: ubuntu-latest
+    timeout-minutes: 10
+    steps:
+      - name: Find the check's fix
+        id: find
+        uses: actions/github-script@v9
+        with:
+          script: |
+            const MARKER = '<!-- pr-tidy-bot -->';
+            const CHECK_WORKFLOW = 'clang_tidy.yml';
+            const ARTIFACT = 'clang-tidy-fix';
+            const CPP = /^(src|tests)\/.+\.(cpp|cc|cxx|hpp|h|hxx)$/;
+
+            const { owner, repo } = context.repo;
+            const issue = context.payload.issue;
+            const comment = context.payload.comment;
+
+            // Ignores a comment whose sender is not its author.
+            if (context.payload.sender.login !== comment.user.login || comment.user.type !== 'User') {
+              core.info('Ignoring a comment not written by its sender, or by a bot.');
+              return;
+            }
+
+            const commandLine = (comment.body || '')
+              .split('\n')
+              .map((line) => line.trim())
+              .find((line) => /^\/bot\s+fix-tidy\b/i.test(line));
+            if (!commandLine) {
+              core.info('No /bot fix-tidy command found.');
+              return;
+            }
+
+            const commenter = comment.user.login;
+            // Answers only the PR's author and maintainers, so the command cannot be used to spam.
+            if (commenter !== issue.user.login) {
+              const { data: access } = await github.rest.repos.getCollaboratorPermissionLevel({ owner, repo, username: commenter });
+              if (!['admin', 'write'].includes(access.permission)) {
+                core.info(`Ignoring /bot fix-tidy from @${commenter}: not the PR's author and no write access.`);
+                return;
+              }
+            }
+
+            const react = (content) =>
+              github.rest.reactions.createForIssueComment({ owner, repo, comment_id: comment.id, content });
+            async function reply(body, content) {
+              await react(content);
+              await github.rest.issues.createComment({ owner, repo, issue_number: issue.number, body: `${MARKER}\n@${commenter} ${body}` });
+            }
+            const refuse = (reason) => reply(reason, '-1');
+
+            await react('eyes');
+
+            if (!/^\/bot\s+fix-tidy$/i.test(commandLine)) {
+              return refuse('`/bot fix-tidy` takes no arguments.');
+            }
+
+            const { data: pr } = await github.rest.pulls.get({ owner, repo, pull_number: issue.number });
+            if (pr.state !== 'open') {
+              return refuse('the PR is not open.');
+            }
+            if (!pr.head.repo) {
+              return refuse('the PR\'s branch is in a repository that no longer exists.');
+            }
+
+            const sha = pr.head.sha.slice(0, 10);
+            const { data: { workflow_runs: runs } } = await github.rest.actions.listWorkflowRuns({
+              owner, repo, workflow_id: CHECK_WORKFLOW, event: 'pull_request', head_sha: pr.head.sha, per_page: 1
+            });
+            const run = runs[0];
+            if (!run) {
+              return refuse(`the clang-tidy check has not run on ${sha}, the PR's latest commit.`);
+            }
+            if (run.status !== 'completed') {
+              return refuse(`the clang-tidy check is still running on ${sha}. Comment \`/bot fix-tidy\` again once it finishes.`);
+            }
+            if (run.conclusion === 'success') {
+              return reply(`the clang-tidy check passes on ${sha}. There is nothing to fix.`, '+1');
+            }
+            const { data: { artifacts } } = await github.rest.actions.listWorkflowRunArtifacts({
+              owner, repo, run_id: run.id, name: ARTIFACT
+            });
+            if (!artifacts.some((a) => !a.expired)) {
+              return refuse(
+                run.conclusion === 'failure'
+                  ? `clang-tidy has no automatic fix for what the check reports on ${sha}. The findings, in the [check's log](${run.html_url}), need a manual edit.`
+                  : `the clang-tidy check on ${sha} did not finish (${run.conclusion}). Re-run it, then comment \`/bot fix-tidy\` again.`
+              );
+            }
+
+            // The right-side lines of each changed C++ file's diff: the lines a
+            // review comment can be placed on. A file too large for GitHub to
+            // show its diff has none, and gets no suggestions.
+            const files = await github.paginate(github.rest.pulls.listFiles, { owner, repo, pull_number: pr.number, per_page: 100 });
+            const ranges = {};
+            for (const file of files) {
+              if (file.status === 'removed' || !CPP.test(file.filename)) {
+                continue;
+              }
+              ranges[file.filename] = [...(file.patch || '').matchAll(/^@@ -\d+(?:,\d+)? \+(\d+)(?:,(\d+))? @@/gm)]
+                .map((m) => [Number(m[1]), Number(m[1]) + Number(m[2] ?? 1) - 1])
+                .filter(([first, last]) => last >= first);
+            }
+
+            core.setOutput('run-id', run.id);
+            core.setOutput('run-url', run.html_url);
+            core.setOutput('head-sha', pr.head.sha);
+            core.setOutput('head-repo', pr.head.repo.full_name);
+            core.setOutput('ranges', JSON.stringify(ranges));
+
+      - name: Download the fix
+        if: steps.find.outputs.run-id != ''
+        uses: actions/download-artifact@v8
+        with:
+          name: clang-tidy-fix
+          run-id: ${{ steps.find.outputs.run-id }}
+          github-token: ${{ github.token }}
+          path: ${{ runner.temp }}/clang-tidy-fix
+
+      # The PR's own files, only to apply the patch to. Nothing in them is run.
+      - name: Checkout the PR head
+        if: steps.find.outputs.run-id != ''
+        uses: actions/checkout@v7
+        with:
+          repository: ${{ steps.find.outputs.head-repo }}
+          ref: ${{ steps.find.outputs.head-sha }}
+          path: head
+          fetch-depth: 1
+          lfs: 'false'
+          persist-credentials: false
+          sparse-checkout: |
+            src
+            tests
+
+      # The check made the patch on the PR's merge commit, so it is applied to the
+      # head and diffed again, giving line numbers in the PR's own files.
+      - name: Check the fix and place its suggestions
+        id: place
+        if: steps.find.outputs.run-id != ''
+        env:
+          RANGES: ${{ steps.find.outputs.ranges }}
+        run: |
+          python3 -I - "$RUNNER_TEMP/clang-tidy-fix/fix.patch" head "$RUNNER_TEMP" <<'EOF'
+          import json, os, re, subprocess, sys
+
+          patch_path, head, out = sys.argv[1:]
+          ranges = json.loads(os.environ["RANGES"])
+
+          def output(**values):
+              with open(os.environ["GITHUB_OUTPUT"], "a", encoding="utf-8") as f:
+                  for key, value in values.items():
+                      f.write(f"{key}={value}\n")
+
+          # Every line the patch adds must be an #include or blank, in a C++ file the
+          # PR changes, and it may not remove, create, rename or change the mode of
+          # anything.
+          include = re.compile(r'\s*#\s*include\s*(<[\w./+-]+>|"[\w./+-]+")\s*')
+          header = re.compile(r"(index [0-9a-f]+\.\.[0-9a-f]+( \d+)?|@@ -\d+(,\d+)? \+\d+(,\d+)? @@.*)")
+          problems = []
+          path = None
+          for line in open(patch_path, encoding="utf-8").read().splitlines():
+              if line.startswith("diff --git "):
+                  match = re.fullmatch(r"diff --git a/(.+) b/\1", line)
+                  path = match.group(1) if match else None
+                  if path not in ranges:
+                      problems.append(f"{line}: not a C++ file the PR changes")
+              # git appends a tab to the --- and +++ lines of a path that contains a space.
+              elif line.removesuffix("\t") in (f"--- a/{path}", f"+++ b/{path}") or header.fullmatch(line):
+                  pass
+              elif line.startswith(" ") or line == "\\ No newline at end of file":
+                  pass
+              elif line.startswith("+") and (include.fullmatch(line[1:]) or not line[1:].strip()):
+                  pass
+              else:
+                  problems.append(f"{path}: {line}")
+          if problems:
+              for problem in problems:
+                  print(f"::error::Refused patch line {problem}")
+              output(result="rejected")
+              sys.exit()
+
+          if subprocess.run(["git", "-C", head, "apply", "--index", os.path.abspath(patch_path)]).returncode != 0:
+              output(result="apply-failed")
+              sys.exit()
+
+          git = ["git", "-C", head, "-c", "core.quotePath=false", "diff", "--cached", "--no-color", "--no-ext-diff",
+                 "--src-prefix=a/", "--dst-prefix=b/"]
+          with open(os.path.join(out, "head.patch"), "w", encoding="utf-8") as f:
+              f.write(subprocess.run(git, check=True, capture_output=True, encoding="utf-8").stdout)
+
+          # Each run of added lines becomes one suggestion on the line it goes after
+          # (before, at the top of a file): that line, replaced by itself and the
+          # includes. It can only sit on a line the PR's diff shows.
+          hunks = []
+          path = None
+          for line in subprocess.run(git + ["-U0"], check=True, capture_output=True, encoding="utf-8").stdout.splitlines():
+              if line.startswith("diff --git "):
+                  path = re.fullmatch(r"diff --git a/(.+) b/\1", line).group(1)
+              elif line.startswith("@@ "):
+                  hunks.append((path, int(re.match(r"@@ -(\d+)", line).group(1)), []))
+              elif hunks and line.startswith("+") and not line.startswith("+++ "):
+                  hunks[-1][2].append(line[1:])
+
+          suggestions = []
+          total = suggested = 0
+          for path, after, added in hunks:
+              count = sum(bool(include.fullmatch(line)) for line in added)
+              total += count
+              original = subprocess.run(["git", "-C", head, "show", f"HEAD:{path}"], check=True, capture_output=True,
+                                        encoding="utf-8").stdout.splitlines()
+              line = max(after, 1)
+              if line > len(original) or not any(first <= line <= last for first, last in ranges[path]):
+                  continue
+              body = "\n".join([original[line - 1], *added] if after else [*added, original[0]])
+              # A fence longer than any run of backticks in the line it repeats.
+              fence = "`" * max([3] + [len(run) + 1 for run in re.findall(r"`+", body)])
+              suggestions.append({"path": path, "line": line, "side": "RIGHT",
+                                  "body": f"{fence}suggestion\n{body}\n{fence}"})
+              suggested += count
+          with open(os.path.join(out, "suggestions.json"), "w", encoding="utf-8") as f:
+              json.dump(suggestions, f)
+          output(result="ok", includes=total, suggested=suggested)
+          EOF
+
+      - name: Post the fix
+        if: always() && steps.find.outputs.run-id != ''
+        uses: actions/github-script@v9
+        env:
+          RESULT: ${{ steps.place.outputs.result }}
+          INCLUDES: ${{ steps.place.outputs.includes }}
+          SUGGESTED: ${{ steps.place.outputs.suggested }}
+          HEAD_SHA: ${{ steps.find.outputs.head-sha }}
+          CHECK_URL: ${{ steps.find.outputs.run-url }}
+        with:
+          script: |
+            const fs = require('fs');
+            const path = require('path');
+            const MARKER = '<!-- pr-tidy-bot -->';
+            // GitHub's limit on a review body is 65536 characters.
+            const MAX_PATCH = 60000;
+
+            const { owner, repo } = context.repo;
+            const issue = context.payload.issue;
+            const comment = context.payload.comment;
+            const commenter = comment.user.login;
+            const { RESULT, INCLUDES, SUGGESTED, HEAD_SHA, CHECK_URL, RUNNER_TEMP } = process.env;
+            const sha = HEAD_SHA.slice(0, 10);
+            const runUrl = `${context.serverUrl}/${owner}/${repo}/actions/runs/${context.runId}`;
+
+            const react = (content) =>
+              github.rest.reactions.createForIssueComment({ owner, repo, comment_id: comment.id, content });
+            async function refuse(reason) {
+              await react('-1');
+              await github.rest.issues.createComment({ owner, repo, issue_number: issue.number, body: `${MARKER}\n@${commenter} ${reason}` });
+            }
+
+            if (RESULT === 'rejected') {
+              return refuse(`the check's fix changes more than includes, so I didn't post it. See the [run log](${runUrl}).`);
+            }
+            if (RESULT === 'apply-failed') {
+              return refuse(`the check's fix doesn't apply to ${sha}. Merge the base branch into the PR, then comment \`/bot fix-tidy\` again once the check has run.`);
+            }
+            if (RESULT !== 'ok') {
+              return refuse(`something went wrong. See the [run log](${runUrl}).`);
+            }
+
+            const read = (...parts) => fs.readFileSync(path.join(RUNNER_TEMP, ...parts), 'utf8');
+            const patch = read('head.patch');
+            const suggestions = JSON.parse(read('suggestions.json'));
+            const passes = read('clang-tidy-fix', 'status').trim() === '0';
+
+            const one = INCLUDES === '1';
+            const includes = one ? '1 missing include' : `${INCLUDES} missing includes`;
+            const inline = SUGGESTED === '0'
+              ? (one ? 'It goes on a line this PR does not change, so I can\'t suggest it inline.'
+                     : 'They go on lines this PR does not change, so I can\'t suggest them inline.')
+              : SUGGESTED === INCLUDES
+                ? (one ? 'It is suggested inline below.' : 'Each is suggested inline below.')
+                : `${SUGGESTED} of them are suggested inline below; the rest go on lines this PR does not change.`;
+            const remaining = passes
+              ? `With ${one ? 'it' : 'them'}, the check passes.`
+              : `Some findings remain that need a manual edit; see the [check's log](${CHECK_URL}).`;
+            // A fence longer than any run of backticks in the patch's context lines.
+            const fence = '`'.repeat(Math.max(3, ...[...patch.matchAll(/`+/g)].map((m) => m[0].length + 1)));
+            const apply = patch.length > MAX_PATCH
+              ? `The full patch is too large to show here. Download \`fix.patch\` from the [check's run](${CHECK_URL}) and run \`git apply fix.patch\`.`
+              : `To apply ${one ? 'it' : 'all of them'}, run this in your checkout of the PR branch:\n\n${fence}sh\ngit apply <<'EOF'\n${patch}EOF\n${fence}`;
+            const body = (withSuggestions) => `${MARKER}\n@${commenter} clang-tidy's fix for ${sha} adds ${includes}. ` +
+              `${withSuggestions ? `${inline} ` : ''}${remaining}\n\n${apply}`;
+
+            const review = { owner, repo, pull_number: issue.number, commit_id: HEAD_SHA, event: 'COMMENT' };
+            try {
+              await github.rest.pulls.createReview({ ...review, body: body(true), comments: suggestions });
+            } catch (error) {
+              // A suggestion GitHub will not place still leaves the patch.
+              core.warning(`Posting the suggestions failed (${error.message}); posting the patch alone.`);
+              await github.rest.pulls.createReview({ ...review, body: body(false) });
+            }
+            await react('+1');

localization/i18n/zh_CN/OrcaSlicer_zh_CN.po

@@ -7478,7 +7478,7 @@ msgid "Update"
 msgstr "更新"
 
 msgid "Assistant(HMS)"
-msgstr "助理（HMS）"
+msgstr "助手(HMS)"
 
 #, c-format, boost-format
 msgid "Network plug-in v%s"

resources/images/score_star_outline.svg

@@ -0,0 +1,3 @@
+<svg width="28" height="27" viewBox="0 0 28 27" fill="none" xmlns="http://www.w3.org/2000/svg">
+<path transform="matrix(0.9 0 0 0.9 1.4 1.35)" d="M11.9888 2.01601C12.8984 0.494662 15.1024 0.494662 16.012 2.01601L18.8677 6.79237C19.1958 7.34113 19.7339 7.73201 20.3572 7.87447L25.7821 9.11446C27.5101 9.50943 28.1913 11.6056 27.0254 12.9408L23.3652 17.1327C22.9449 17.6143 22.7394 18.2469 22.7964 18.8836L23.2936 24.4263C23.4519 26.1918 21.6687 27.4873 20.0386 26.7911L14.9209 24.6056C14.3329 24.3545 13.6679 24.3545 13.0799 24.6056L7.96209 26.7911C6.33196 27.4873 4.54887 26.1918 4.70722 24.4263L5.20434 18.8836C5.26145 18.2469 5.05595 17.6143 4.63544 17.1327L0.97533 12.9408C-0.19048 11.6056 0.490599 9.50943 2.21859 9.11446L7.64364 7.87447C8.2669 7.73201 8.80494 7.34113 9.13302 6.79237L11.9888 2.01601Z" stroke="#949494" stroke-width="2.4" stroke-linejoin="round"/>
+</svg>

resources/profiles/Qidi.json

@@ -1,6 +1,6 @@
 {
 	"name": "Qidi",
-	"version": "02.04.00.16",
+	"version": "02.04.00.17",
 	"force_update": "0",
 	"description": "Qidi configurations",
 	"machine_model_list": [

resources/profiles/Qidi/machine/Qidi Q1 Pro 0.4 nozzle.json

@@ -83,7 +83,7 @@
 	"extruder_clearance_height_to_lid": "120",
 	"layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nLOG_Z\nG92 E0\n",
 	"machine_end_gcode": "M141 S0\nM104 S0\nM140 S0\nG1 E-3 F1800\nG0 Z{min(max_print_height, max_layer_z + 3)} F600\nG0 X0 Y0 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}",
-	"machine_start_gcode": "PRINT_START BED=[hot_plate_temp_initial_layer] HOTEND=[nozzle_temperature_initial_layer] CHAMBER=[chamber_temperature]\nM83\nM140 S[hot_plate_temp_initial_layer]\nM104 S[nozzle_temperature_initial_layer]\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0) + 3} Z0\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0) + 6}\nG1 Z1 F600\n",
+	"machine_start_gcode": "PRINT_START BED=[bed_temperature_initial_layer_single] HOTEND=[nozzle_temperature_initial_layer] CHAMBER=[chamber_temperature]\nM83\nM140 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 5, first_layer_print_min[1] + 80) - 85), 0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0) + 3} Z0\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85), 0) + 6}\nG1 Z1 F600\n",
 	"thumbnails_format": "PNG",
 	"default_filament_profile": [
 		"Generic PLA @Qidi Q1 Pro 0.4 nozzle"

resources/profiles/Qidi/machine/Qidi X-CF Pro 0.4 nozzle.json

@@ -100,7 +100,7 @@
 	"default_filament_profile": [
 		"Generic PLA @Qidi"
 	],
-	"machine_start_gcode": "G28\nM140 S[hot_plate_temp_initial_layer]\nM190 S[hot_plate_temp_initial_layer]\nM109 S[nozzle_temperature_initial_layer]\nG92 E-19\nG0 Y5 Z0.3 F3600\nG1 X5 E0 F2400\n",
+	"machine_start_gcode": "G28\nM140 S[bed_temperature_initial_layer_single]\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nG92 E-19\nG0 Y5 Z0.3 F3600\nG1 X5 E0 F2400\n",
 	"machine_end_gcode": "M104 S0\nM140 S0\n;Retract the filament\nG92 E0\nG1 E-3 F300\nG28\nM84\n",
 	"scan_first_layer": "0"
 }

resources/profiles/Qidi/machine/fdm_qidi_x3_common.json

@@ -24,7 +24,7 @@
 		"210x210/COLPIC",
 		"110x110/PNG"
 	],
-	"machine_start_gcode": "PRINT_START\nG28\nM141 S0\nG0 Z50 F600\nM190 S[hot_plate_temp_initial_layer]\nG28 Z\nG29; mesh bed leveling ,comment this code to close it\nG0 X0 Y0 Z50 F6000\nM141 S{overall_chamber_temperature}\nM109 S[nozzle_temperature_initial_layer]\nM106 P3 S255\nM83\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 12} E{-10 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 E{10 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\n",
+	"machine_start_gcode": "PRINT_START\nG28\nM141 S0\nG0 Z50 F600\nM190 S[bed_temperature_initial_layer_single]\nG28 Z\nG29; mesh bed leveling ,comment this code to close it\nG0 X0 Y0 Z50 F6000\nM141 S{overall_chamber_temperature}\nM109 S[nozzle_temperature_initial_layer]\nM106 P3 S255\nM83\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 12} E{-10 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 E{10 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\n",
 	"machine_end_gcode": "M141 S0\nM104 S0\nM140 S0\nG1 E-3 F1800\nG0 Z{min(max_print_height, max_layer_z + 3)} F600\nG0 X0 Y0 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}",
 	"scan_first_layer": "0"
 }

src/libslic3r/Color.cpp

@@ -434,3 +434,7 @@ unsigned char picking_checksum_alpha_channel(unsigned char red, unsigned char gr
 
 } // namespace Slic3r
 
+
+namespace Slic3r {
+std::string_view tidy_bot_probe() { return std::string_view("x"); }
+}

src/libslic3r/Format/bbs_3mf.cpp

@@ -1729,8 +1729,8 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result)
             //plate->pattern_file = it->second->pattern_file;
             plate->no_light_thumbnail_file = it->second->no_light_thumbnail_file;
             plate->top_file = it->second->top_file;
-            plate->pick_file = it->second->pick_file.empty();
-            plate->pattern_bbox_file = it->second->pattern_bbox_file.empty();
+            plate->pick_file = it->second->pick_file;
+            plate->pattern_bbox_file = it->second->pattern_bbox_file;
             plate->config = it->second->config;
 
             if (!plate->thumbnail_file.empty())

src/libslic3r/GCode.cpp

@@ -3295,7 +3295,7 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato
     m_is_role_based_fan_on.fill(false);
     m_role_based_fan_marker_layer.fill(-1);
 
-    m_fan_mover.release();
+    m_fan_mover.reset();
     m_ordering_cache.clear();
 
     // Belt printer: initialize belt-specific writer via virtual hook.

src/slic3r/GUI/AMSMaterialsSetting.cpp

@@ -16,6 +16,7 @@
 #include <wx/checklst.h>
 #include "slic3r/GUI/GUI_Utils.hpp"
 #include "slic3r/GUI/Widgets/Button.hpp"
+#include "slic3r/GUI/Widgets/DropDown.hpp"
 #include "slic3r/GUI/Widgets/Label.hpp"
 #include <utility>
 #include "slic3r/GUI/wxExtensions.hpp"
@@ -172,7 +173,26 @@ void AMSMaterialsSetting::create()
 
     Bind(wxEVT_PAINT, &AMSMaterialsSetting::paintEvent, this);
     Bind(EVT_SELECTED_COLOR, &AMSMaterialsSetting::on_picker_color, this);
-     m_comboBox_filament->Connect(wxEVT_COMMAND_COMBOBOX_SELECTED, wxCommandEventHandler(AMSMaterialsSetting::on_select_filament), NULL, this);
+    m_comboBox_filament->Connect(wxEVT_COMMAND_COMBOBOX_SELECTED, wxCommandEventHandler(AMSMaterialsSetting::on_select_filament), NULL, this);
+    m_comboBox_filament->Bind(EVT_DROPDOWN_ITEM_ACTION, &AMSMaterialsSetting::on_toggle_favorite_filament, this);
+
+    // Favorites toggled in the open list are regrouped just before it opens again, so rows never move
+    // under the cursor. These handlers run ahead of ComboBox's own, which then measure and show the
+    // rebuilt rows; wxEVT_COMBOBOX_DROPDOWN would be too late, as ComboBox sends it after showing the list.
+    auto regroup_favorites = [this]() {
+        if (!m_favorites_regroup || m_comboBox_filament->is_drop_down())
+            return;
+        const FilamentInfos* info        = selected_filament_info();
+        const std::string    filament_id = info ? info->filament_id : std::string();
+        rebuild_filament_dropdown_items(filament_id);
+    };
+    m_comboBox_filament->Bind(wxEVT_LEFT_DOWN, [regroup_favorites](wxMouseEvent& e) { regroup_favorites(); e.Skip(); });
+    m_comboBox_filament->Bind(wxEVT_LEFT_DCLICK, [regroup_favorites](wxMouseEvent& e) { regroup_favorites(); e.Skip(); });
+    m_comboBox_filament->Bind(wxEVT_KEY_DOWN, [regroup_favorites](wxKeyEvent& e) {
+        if (e.GetKeyCode() == WXK_RETURN || e.GetKeyCode() == WXK_SPACE) // the keys that open the list
+            regroup_favorites();
+        e.Skip();
+    });
 
     m_comboBox_cali_result->Connect(wxEVT_COMMAND_COMBOBOX_SELECTED, wxCommandEventHandler(AMSMaterialsSetting::on_select_cali_result), NULL, this);
 }
@@ -191,11 +211,9 @@ void AMSMaterialsSetting::create_panel_normal(wxWindow* parent)
 
     m_sizer_filament->Add(0, 0, 0, wxEXPAND, 0);
 
-#ifdef __APPLE__
-    m_comboBox_filament = new wxComboBox(parent, wxID_ANY, wxEmptyString, wxDefaultPosition, AMS_MATERIALS_SETTING_COMBOX_WIDTH, 0, nullptr, wxCB_READONLY);
-#else
     m_comboBox_filament = new ::ComboBox(parent, wxID_ANY, wxEmptyString, wxDefaultPosition, AMS_MATERIALS_SETTING_COMBOX_WIDTH, 0, nullptr, wxCB_READONLY);
-#endif
+    m_star_filled = ScalableBitmap(this, "score_star_light", 16);
+    m_star_empty  = ScalableBitmap(this, "score_star_outline", 16);
 
     m_sizer_filament->Add(m_comboBox_filament, 1, wxALIGN_CENTER, 0);
 
@@ -420,6 +438,7 @@ void AMSMaterialsSetting::paintEvent(wxPaintEvent &evt)
 AMSMaterialsSetting::~AMSMaterialsSetting()
 {
     m_comboBox_filament->Disconnect(wxEVT_COMMAND_COMBOBOX_SELECTED, wxCommandEventHandler(AMSMaterialsSetting::on_select_filament), NULL, this);
+    m_comboBox_filament->Unbind(EVT_DROPDOWN_ITEM_ACTION, &AMSMaterialsSetting::on_toggle_favorite_filament, this);
     m_comboBox_cali_result->Disconnect(wxEVT_COMMAND_COMBOBOX_SELECTED, wxCommandEventHandler(AMSMaterialsSetting::on_select_cali_result), NULL, this);
 }
 
@@ -531,10 +550,9 @@ void AMSMaterialsSetting::on_select_reset(wxCommandEvent& event) {
     std::string   selected_ams_id;
     PresetBundle *preset_bundle = wxGetApp().preset_bundle;
     if (preset_bundle) {
+        const FilamentInfos* selected_info = selected_filament_info();
         for (auto it = preset_bundle->filaments.begin(); it != preset_bundle->filaments.end(); it++) {
-            auto        filament_item = map_filament_items[m_comboBox_filament->GetValue().ToStdString()];
-            std::string filament_id   = filament_item.filament_id;
-            if (it->filament_id.compare(filament_id) == 0) {
+            if (selected_info && it->filament_id.compare(selected_info->filament_id) == 0) {
                 selected_ams_id = it->filament_id;
                 break;
             }
@@ -682,12 +700,13 @@ void AMSMaterialsSetting::on_select_ok(wxCommandEvent &event)
     ams_setting_id = "";
 
     // the combobox item
-    auto filament_item = map_filament_items[m_comboBox_filament->GetValue().ToStdString()];
+    const FilamentInfos* selected_info = selected_filament_info();
+    const std::string    filament_id   = selected_info ? selected_info->filament_id : std::string();
 
     // check filament info (rack-gated per-nozzle blacklist evaluation)
     PresetBundle* preset_bundle = wxGetApp().preset_bundle;
     const auto& fila_check_res = sCheckFilamentInfo(preset_bundle, obj, ams_id, slot_id,
-                                                    filament_item.filament_id, ams_filament_id, ams_setting_id);
+                                                    filament_id, ams_filament_id, ams_setting_id);
 
     if (const auto& prohibit_items = fila_check_res.get_items_by_action("prohibition"); !prohibit_items.empty()) {
         wxString info_msg;
@@ -986,6 +1005,133 @@ static void _collect_filament_info(const wxString& shown_name,
     query_filament_types[shown_name] = filament.config.get_filament_type();
 }
 
+static const char* AMS_FAVORITE_FILAMENT_IDS_KEY = "ams_favorite_filament_ids";
+
+const AMSMaterialsSetting::FilamentInfos* AMSMaterialsSetting::selected_filament_info() const
+{
+    const int selection = m_comboBox_filament->GetSelection();
+    if (selection < 0 || selection >= int(m_filament_list_items.size()) || !m_filament_list_items[selection].is_filament)
+        return nullptr;
+    return &m_filament_list_items[selection].filament;
+}
+
+std::set<std::string> AMSMaterialsSetting::load_favorite_filament_ids() const
+{
+    std::set<std::string> favorite_ids;
+    std::vector<std::string> values;
+    const std::string serialized = wxGetApp().app_config->get(AMS_FAVORITE_FILAMENT_IDS_KEY);
+    if (!serialized.empty() && Slic3r::unescape_strings_cstyle(serialized, values)) {
+        favorite_ids.insert(values.begin(), values.end());
+    }
+    return favorite_ids;
+}
+
+void AMSMaterialsSetting::save_favorite_filament_ids(const std::set<std::string>& favorite_ids)
+{
+    std::vector<std::string> values(favorite_ids.begin(), favorite_ids.end());
+    wxGetApp().app_config->set(AMS_FAVORITE_FILAMENT_IDS_KEY, Slic3r::escape_strings_cstyle(values));
+    wxGetApp().app_config->save();
+}
+
+void AMSMaterialsSetting::rebuild_filament_dropdown_items(const std::string& selected_filament_id)
+{
+    std::vector<DropDown::Item> items;
+    m_filament_list_items.clear();
+
+    auto append_header = [&items, this](const wxString& label) {
+        DropDown::Item item;
+        item.text = label;
+        item.style = DD_ITEM_STYLE_SPLIT_ITEM | DD_ITEM_STYLE_DISABLED;
+        items.push_back(item);
+        m_filament_list_items.push_back(FilamentListItem{});
+    };
+
+    auto append_filament = [&items, this](const wxString& name) {
+        auto info_it = map_filament_items.find(name);
+        if (info_it == map_filament_items.end())
+            return;
+
+        DropDown::Item item;
+        item.text = name;
+        items.push_back(item);
+        m_filament_list_items.push_back(FilamentListItem{info_it->second, true});
+    };
+
+    // Favorites are listed again at the top under their own header. Without any, the list is the
+    // plain filament list.
+    const std::set<std::string> favorite_ids = load_favorite_filament_ids();
+    std::vector<wxString>       favorites;
+    for (const wxString& name : m_sorted_filament_items) {
+        auto info_it = map_filament_items.find(name);
+        if (info_it != map_filament_items.end() && favorite_ids.count(info_it->second.filament_id) > 0)
+            favorites.push_back(name);
+    }
+    if (!favorites.empty()) {
+        append_header(_L("Favorite filaments"));
+        for (const wxString& name : favorites)
+            append_filament(name);
+        append_header(_L("All filaments"));
+    }
+    for (const wxString& name : m_sorted_filament_items)
+        append_filament(name);
+
+    int selection_idx = -1;
+    if (!selected_filament_id.empty()) {
+        for (int i = 0; i < int(m_filament_list_items.size()); ++i) {
+            if (m_filament_list_items[i].is_filament && m_filament_list_items[i].filament.filament_id == selected_filament_id) {
+                selection_idx = i;
+                break;
+            }
+        }
+    }
+
+    // Clear() first: SetItems() keeps the old selection, and SetSelection() ignores an index equal to it,
+    // which would leave the previous filament's name on the combo.
+    m_comboBox_filament->Clear();
+    m_comboBox_filament->SetItems(items);
+    update_favorite_stars();
+    m_comboBox_filament->SetSelection(selection_idx);
+    m_favorites_regroup = false;
+}
+
+void AMSMaterialsSetting::update_favorite_stars()
+{
+    const std::set<std::string> favorite_ids = load_favorite_filament_ids();
+    for (size_t i = 0; i < m_filament_list_items.size(); ++i) {
+        const FilamentListItem& row = m_filament_list_items[i];
+        if (row.is_filament) {
+            const bool favorite = favorite_ids.count(row.filament.filament_id) > 0;
+            m_comboBox_filament->SetItemActionBitmap(i, favorite ? m_star_filled.bmp() : m_star_empty.bmp());
+        }
+    }
+}
+
+void AMSMaterialsSetting::toggle_favorite_filament(const std::string& filament_id)
+{
+    if (filament_id.empty())
+        return;
+
+    std::set<std::string> favorite_ids = load_favorite_filament_ids();
+    auto iter = favorite_ids.find(filament_id);
+    if (iter == favorite_ids.end())
+        favorite_ids.insert(filament_id);
+    else
+        favorite_ids.erase(iter);
+
+    save_favorite_filament_ids(favorite_ids);
+}
+
+void AMSMaterialsSetting::on_toggle_favorite_filament(wxCommandEvent& evt)
+{
+    const int index = evt.GetInt();
+    if (index < 0 || index >= int(m_filament_list_items.size()) || !m_filament_list_items[index].is_filament)
+        return;
+
+    toggle_favorite_filament(m_filament_list_items[index].filament.filament_id);
+    update_favorite_stars();
+    m_favorites_regroup = true;
+}
+
 void AMSMaterialsSetting::Popup(wxString filament, wxString sn, wxString temp_min, wxString temp_max, wxString k, wxString n)
 {
     if (!obj) return;
@@ -999,13 +1145,12 @@ void AMSMaterialsSetting::Popup(wxString filament, wxString sn, wxString temp_mi
     m_input_k_val->GetTextCtrl()->SetValue(k);
     m_input_n_val->GetTextCtrl()->SetValue(n);
 
-    wxArrayString filament_items;
     wxString bambu_filament_name;
-    wxString hint_filament_name; // the hint type to be selected
     std::unordered_map<wxString, wxString> query_filament_vendors;// some information for sort
     std::unordered_map<wxString, wxString> query_filament_types;  //
 
     std::set<std::string> filament_id_set;
+    m_sorted_filament_items.clear();
     // The alias keyed map has to start empty: it is a member, so a stale alias left by an earlier
     // popup (a different printer, a different nozzle) would resolve to that printer's filament_id.
     map_filament_items.clear();
@@ -1035,7 +1180,7 @@ void AMSMaterialsSetting::Popup(wxString filament, wxString sn, wxString temp_mi
             if (alias.empty())
                 continue;
 
-            filament_items.push_back(alias);
+            m_sorted_filament_items.push_back(alias);
             _collect_filament_info(alias, *filament_it, query_filament_vendors, query_filament_types);
 
             FilamentInfos filament_infos;
@@ -1044,7 +1189,6 @@ void AMSMaterialsSetting::Popup(wxString filament, wxString sn, wxString temp_mi
             map_filament_items[alias]  = filament_infos;
 
             if (filament_it->filament_id == ams_filament_id) {
-                hint_filament_name = from_u8(alias);
                 bambu_filament_name = from_u8(alias);
 
 
@@ -1215,24 +1359,11 @@ void AMSMaterialsSetting::Popup(wxString filament, wxString sn, wxString temp_mi
             return name_compare != 0 ? name_compare < 0 : left < right;
         };
 
-        std::sort(filament_items.begin(), filament_items.end(), _filament_sorter);
+        std::sort(m_sorted_filament_items.begin(), m_sorted_filament_items.end(), _filament_sorter);
     }
 
-    // traverse the hint selection idx
-    int selection_idx = -1;
-    {
-        for(int i = 0; i < filament_items.size(); i++)
-        {
-            if (hint_filament_name == filament_items[i])
-            {
-                selection_idx = i;
-                break;
-            }
-        }
-    }
-
-    m_comboBox_filament->Set(filament_items);
-    m_comboBox_filament->SetSelection(selection_idx);
+    rebuild_filament_dropdown_items(ams_filament_id);
+    int selection_idx = m_comboBox_filament->GetSelection();
     post_select_event(selection_idx);
 
     if (selection_idx < 0) {
@@ -1289,6 +1420,7 @@ void AMSMaterialsSetting::on_select_filament(wxCommandEvent &evt)
     int* from_printer = static_cast<int*>(m_comboBox_filament->GetClientData());
 
     m_filament_type = "";
+    const FilamentInfos* selected_info = selected_filament_info();
     PresetBundle* preset_bundle = wxGetApp().preset_bundle;
     if (preset_bundle) {
         std::ostringstream stream;
@@ -1309,9 +1441,8 @@ void AMSMaterialsSetting::on_select_filament(wxCommandEvent &evt)
         std::string nozzle_diameter_str = stream.str();
         // Resolve the selection against the same list Popup() built the dropdown from, so the two
         // halves of the dialog cannot disagree about which filaments this machine can use.
-        const std::string selected = m_comboBox_filament->GetValue().ToStdString();
-        if (!selected.empty()) {
-            const std::string filament_id = map_filament_items[selected].filament_id;
+        if (selected_info) {
+            const std::string& filament_id = selected_info->filament_id;
             for (Preset *it : preset_bundle->get_filament_presets_for_machine(
                      DevPrinterConfigUtil::get_printer_display_name(obj->printer_type), nozzle_diameter_str, obj->is_support_user_preset)) {
                 if (it->filament_id != filament_id)
@@ -1364,7 +1495,7 @@ void AMSMaterialsSetting::on_select_filament(wxCommandEvent &evt)
     //reset cali
     int cali_select_idx = -1;
 
-    if ( !this->obj || m_filament_selection < 0) {
+    if ( !this->obj || m_filament_selection < 0 || !selected_info) {
         m_input_k_val->Enable(false);
         m_input_n_val->Enable(false);
         m_button_confirm->Disable(); // ORCA No need to change style
@@ -1383,21 +1514,9 @@ void AMSMaterialsSetting::on_select_filament(wxCommandEvent &evt)
     ams_filament_id = "";
     ams_setting_id = "";
 
-    if (preset_bundle) {
-        for (auto it = preset_bundle->filaments.begin(); it != preset_bundle->filaments.end(); it++) {
-            auto itor = map_filament_items.find(m_comboBox_filament->GetValue().ToStdString());
-            if ( itor != map_filament_items.end()) {
-                ams_filament_id = itor->second.filament_id;
-                ams_setting_id  = itor->second.setting_id;
-                break;
-            }
-
-            if (it->alias.compare(m_comboBox_filament->GetValue().ToStdString()) == 0) {
-                ams_filament_id = it->filament_id;
-                ams_setting_id = it->setting_id;
-                break;
-            }
-        }
+    if (selected_info) {
+        ams_filament_id = selected_info->filament_id;
+        ams_setting_id  = selected_info->setting_id;
     }
 
     wxArrayString items;
@@ -1529,6 +1648,11 @@ void AMSMaterialsSetting::on_dpi_changed(const wxRect &suggested_rect)
     m_button_reset->Rescale(); // ORCA
     m_button_confirm->Rescale(); // ORCA
     m_button_close->Rescale(); // ORCA
+    // An open list would keep the measurements of the old stars, so close it before replacing them.
+    m_comboBox_filament->CloseDropdown();
+    m_star_filled.msw_rescale();
+    m_star_empty.msw_rescale();
+    update_favorite_stars();
     this->Refresh();
 }
 

src/slic3r/GUI/AMSMaterialsSetting.hpp

@@ -31,6 +31,7 @@
 #include "slic3r/GUI/Widgets/StateColor.hpp"
 #include <wx/panel.h>
 #include <map>
+#include <set>
 
 #define AMS_MATERIALS_SETTING_DEF_COLOUR wxColour(255, 255, 255)
 #define AMS_MATERIALS_SETTING_GREY900 wxColour(38, 46, 48)
@@ -156,6 +157,7 @@ protected:
     void create_panel_kn(wxWindow* parent);
     void on_dpi_changed(const wxRect &suggested_rect) override;
     void on_select_filament(wxCommandEvent& evt);
+    void on_toggle_favorite_filament(wxCommandEvent& evt);
     void on_select_cali_result(wxCommandEvent &evt);
     void on_select_ok(wxCommandEvent &event);
     void on_select_reset(wxCommandEvent &event);
@@ -163,6 +165,11 @@ protected:
     void on_clr_picker(wxMouseEvent &event);
     bool is_virtual_tray();
     void update_widgets();
+    void rebuild_filament_dropdown_items(const std::string& selected_filament_id);
+    void update_favorite_stars();
+    std::set<std::string> load_favorite_filament_ids() const;
+    void save_favorite_filament_ids(const std::set<std::string>& favorite_ids);
+    void toggle_favorite_filament(const std::string& filament_id);
 
     void update_filament_editing(bool is_printing);
     // Orca: the variant index of the filament's per-variant options on the nozzle this tray feeds
@@ -202,12 +209,7 @@ protected:
 
     int m_pa_cali_select_id = 0;
 
-// Orca: native wxComboBox on macOS (the custom ComboBox mis-renders the filament dropdown there)
-#ifdef __APPLE__
-    wxComboBox *m_comboBox_filament;
-#else
     ComboBox *m_comboBox_filament;
-#endif
     ComboBox * m_comboBox_cali_result;
     TextInput*       m_readonly_filament;
 
@@ -215,7 +217,20 @@ protected:
         std::string filament_id;
         std::string setting_id;
     };
-    std::map<std::string, FilamentInfos> map_filament_items;
+    struct FilamentListItem {
+        FilamentInfos filament;
+        bool          is_filament{false};
+    };
+    const FilamentInfos* selected_filament_info() const;
+
+    // Keyed by the same wxString the dropdown shows, so a row's name never has to be converted back.
+    std::map<wxString, FilamentInfos>    map_filament_items;
+    std::vector<wxString>                m_sorted_filament_items;
+    std::vector<FilamentListItem>        m_filament_list_items;
+    ScalableBitmap                       m_star_filled;
+    ScalableBitmap                       m_star_empty;
+    // Favorites changed while the list was open; their rows are regrouped before it opens again.
+    bool                                 m_favorites_regroup{false};
 };
 
 wxDECLARE_EVENT(EVT_SELECTED_COLOR, wxCommandEvent);

src/slic3r/GUI/GUI_App.cpp

@@ -3232,9 +3232,16 @@ bool GUI_App::on_init_inner()
 #ifdef _MSW_DARK_MODE
 
 #ifndef __WINDOWS__
+    // The label colours and the dark mode flag were set above from the saved mode. When the system theme
+    // differs from it, refresh them, or dialogs that map their colours stay in the old mode for this session.
+    const bool saved_dark_mode = dark_mode();
     wxSystemAppearance app = wxSystemSettings::GetAppearance();
     GUI::wxGetApp().app_config->set("dark_color_mode", app.IsDark() ? "1" : "0");
     GUI::wxGetApp().app_config->save();
+    if (dark_mode() != saved_dark_mode) {
+        init_label_colours();
+        Update_dark_mode_flag();
+    }
 #endif // __APPLE__
 
 

src/slic3r/GUI/GUI_ObjectList.cpp

@@ -1617,7 +1617,7 @@ void ObjectList::list_manipulation(const wxPoint& mouse_pos, bool evt_context_me
             int obj_idx, vol_idx;
             get_selected_item_indexes(obj_idx, vol_idx, item);
             if (obj_idx != -1) {
-                Plater::TakeSnapshot(plater, _u8L("Shift objects to bed"));
+                Plater::TakeSnapshot snapshot(plater, _u8L("Shift objects to bed"));
                 (*m_objects)[obj_idx]->ensure_on_bed();
                 cnv->reload_scene(true, true);
                 update_info_items(obj_idx);
@@ -2779,12 +2779,13 @@ void ObjectList::del_info_item(const int obj_idx, InfoItemType type)
     GLCanvas3D* cnv = plater->canvas3D();
 
     switch (type) {
-    case InfoItemType::CustomSupports:
+    case InfoItemType::CustomSupports: {
         cnv->get_gizmos_manager().reset_all_states();
-        Plater::TakeSnapshot(plater, "Remove support painting");
+        Plater::TakeSnapshot snapshot(plater, "Remove support painting");
         for (ModelVolume* mv : (*m_objects)[obj_idx]->volumes)
             mv->supported_facets.reset();
         break;
+    }
 
     // BBS: remove CustomSeam
 
@@ -2795,19 +2796,21 @@ void ObjectList::del_info_item(const int obj_idx, InfoItemType type)
         }
         break;
 
-    case InfoItemType::MmSegmentation:
+    case InfoItemType::MmSegmentation: {
         cnv->get_gizmos_manager().reset_all_states();
-        Plater::TakeSnapshot(plater, "Remove color painting");
+        Plater::TakeSnapshot snapshot(plater, "Remove color painting");
         for (ModelVolume* mv : (*m_objects)[obj_idx]->volumes)
             mv->mmu_segmentation_facets.reset();
         break;
+    }
 
-    case InfoItemType::FuzzySkin:
+    case InfoItemType::FuzzySkin: {
         cnv->get_gizmos_manager().reset_all_states();
-        Plater::TakeSnapshot(plater, _u8L("Remove paint-on fuzzy skin"));
+        Plater::TakeSnapshot snapshot(plater, _u8L("Remove paint-on fuzzy skin"));
         for (ModelVolume* mv : (*m_objects)[obj_idx]->volumes)
             mv->fuzzy_skin_facets.reset();
         break;
+    }
 
     // BBS: remove Sinking
     case InfoItemType::Undef : assert(false); break;
@@ -6718,7 +6721,7 @@ void ObjectList::OnEditingStarted(wxDataViewEvent &event)
     else if (col == colSinking) {
         Plater *    plater = wxGetApp().plater();
         GLCanvas3D *cnv    = plater->canvas3D();
-        Plater::TakeSnapshot(plater, _u8L("Shift objects to bed"));
+        Plater::TakeSnapshot snapshot(plater, _u8L("Shift objects to bed"));
         int obj_idx, vol_idx;
         get_selected_item_indexes(obj_idx, vol_idx, item);
         (*m_objects)[obj_idx]->ensure_on_bed();

src/slic3r/GUI/Widgets/ComboBox.cpp

@@ -82,6 +82,11 @@ ComboBox::ComboBox(wxWindow *parent,
         e.SetId(GetId());
         GetEventHandler()->ProcessEvent(e);
     });
+    drop.Bind(EVT_DROPDOWN_ITEM_ACTION, [this](wxCommandEvent &e) {
+        e.SetEventObject(this);
+        e.SetId(GetId());
+        GetEventHandler()->ProcessEvent(e);
+    });
     drop.Bind(EVT_DISMISS, [this](auto &) {
         drop_down = false;
         wxCommandEvent e(wxEVT_COMBOBOX_CLOSEUP);
@@ -251,7 +256,7 @@ int ComboBox::Append(const wxString &text,
                      int style)
 {
     auto valid_bit_map = bitmap.IsOk() ? bitmap : wxNullBitmap;
-    Item item{text, wxEmptyString, valid_bit_map, valid_bit_map, clientData, group_key, group_label};
+    Item item{text, wxEmptyString, valid_bit_map, valid_bit_map, wxNullBitmap, clientData, group_key, group_label};
     item.style = style;
     items.push_back(item);
     SetClientDataType(wxClientData_Void);
@@ -297,6 +302,12 @@ void ComboBox::ForceDropdownOpen()
     }
 }
 
+void ComboBox::CloseDropdown()
+{
+    if (drop.IsShown())
+        drop.DismissAndNotify();
+}
+
 unsigned int ComboBox::GetCount() const { return items.size(); }
 
 void ComboBox::set_replace_text(wxString text, wxString image_name)
@@ -350,6 +361,13 @@ void ComboBox::SetItemBitmap(unsigned int n, wxBitmap const &bitmap)
     drop.Invalidate();
 }
 
+void ComboBox::SetItemActionBitmap(unsigned int n, wxBitmap const &bitmap)
+{
+    if (n >= items.size()) return;
+    items[n].action_icon = bitmap.IsOk() ? bitmap : wxNullBitmap;
+    drop.Invalidate();
+}
+
 int ComboBox::DoInsertItems(const wxArrayStringsAdapter &items,
                             unsigned int                 pos,
                             void **                      clientData,
@@ -357,7 +375,7 @@ int ComboBox::DoInsertItems(const wxArrayStringsAdapter &items,
 {
     if (pos > this->items.size()) return -1;
     for (int i = 0; i < items.GetCount(); ++i) {
-        Item item { items[i], wxEmptyString, wxNullBitmap, wxNullBitmap, clientData ? clientData[i] : NULL };
+        Item item { items[i], wxEmptyString, wxNullBitmap, wxNullBitmap, wxNullBitmap, clientData ? clientData[i] : NULL };
         this->items.insert(this->items.begin() + pos, item);
         ++pos;
     }
@@ -419,16 +437,18 @@ void ComboBox::keyDown(wxKeyEvent& event)
         case WXK_UP:
         case WXK_DOWN:
         case WXK_LEFT:
-        case WXK_RIGHT:
-            if ((event.GetKeyCode() == WXK_UP || event.GetKeyCode() == WXK_LEFT) && GetSelection() > 0) {
-                SetSelection(GetSelection() - 1);
-            } else if ((event.GetKeyCode() == WXK_DOWN || event.GetKeyCode() == WXK_RIGHT) && GetSelection() + 1 < items.size()) {
-                SetSelection(GetSelection() + 1);
-            } else {
+        case WXK_RIGHT: {
+            // Step over disabled rows: the mouse cannot select them either.
+            const int step = (event.GetKeyCode() == WXK_UP || event.GetKeyCode() == WXK_LEFT) ? -1 : 1;
+            int       n    = GetSelection() + step;
+            while (n >= 0 && n < int(items.size()) && (items[n].style & DD_ITEM_STYLE_DISABLED))
+                n += step;
+            if (n < 0 || n >= int(items.size()))
                 break;
-            }
+            SetSelection(n);
             sendComboBoxEvent();
             break;
+        }
         case WXK_TAB:
             HandleAsNavigationKey(event);
             break;

src/slic3r/GUI/Widgets/ComboBox.hpp

@@ -96,10 +96,12 @@ public:
 
     wxBitmap GetItemBitmap(unsigned int n);
     void     SetItemBitmap(unsigned int n, wxBitmap const &bitmap);
+    void     SetItemActionBitmap(unsigned int n, wxBitmap const &bitmap);
     bool     is_drop_down(){return drop_down;}
     void     DeleteOneItem(unsigned int pos) { DoDeleteOneItem(pos); }
 
     void ForceDropdownOpen();
+    void CloseDropdown();
 
 protected:
     virtual int  DoInsertItems(const wxArrayStringsAdapter &items,

src/slic3r/GUI/Widgets/DropDown.cpp

@@ -30,6 +30,7 @@
 #include "slic3r/GUI/wxExtensions.hpp"
 
 wxDEFINE_EVENT(EVT_DISMISS, wxCommandEvent);
+wxDEFINE_EVENT(EVT_DROPDOWN_ITEM_ACTION, wxCommandEvent);
 
 BEGIN_EVENT_TABLE(DropDown, PopupWindow)
 
@@ -242,6 +243,19 @@ static wxSize GetBmpSize(wxBitmap & bmp)
 #endif
 }
 
+// The x-range [first, second) of the column at the right of the rows that holds the items' action
+// icons, empty when no item has one. render() draws the icons in it and mouseReleased() hit-tests
+// clicks against it, so the drawn icon and its clickable area always match.
+std::pair<int, int> DropDown::actionColumn() const
+{
+    if (actionIconWidth <= 0)
+        return {0, 0};
+    int right = rowSize.x;
+    if (rowSize.y * count > GetSize().y) // position bar
+        right -= 6;
+    return {right - actionIconWidth - FromDIP(16), right};
+}
+
 static void _DrawSplitItem(const wxWindow* w, wxDC& dc, wxString split_text, wxPoint start_pt, int item_width, int item_height)
 {
     // save dc
@@ -371,6 +385,10 @@ void DropDown::render(wxDC &dc)
         rcContent.width -= szBmp.x + 5;
     }
 
+    const auto action_column = actionColumn();
+    if (action_column.second > action_column.first)
+        rcContent.width = action_column.first - rcContent.x;
+
     std::set<wxString> groups;
     // draw texts & icons
     int index = 0;
@@ -434,13 +452,24 @@ void DropDown::render(wxDC &dc)
         auto text = group.IsEmpty()
                         ? (item.group_key.IsEmpty() ? item.text : item.group_label)
                         : item.text;
+        if (item.action_icon.IsOk()) {
+            auto action_size = GetBmpSize(item.action_icon);
+            wxPoint action_pt(action_column.second - action_size.x - FromDIP(8),
+                              rcContent.y + (rcContent.height - action_size.y) / 2);
+            dc.DrawBitmap(item.action_icon, action_pt);
+        }
+
         if (!text_off && !text.IsEmpty()) {
             wxSize tSize = dc.GetMultiLineTextExtent(text);
             if (pt.x + tSize.x > rcContent.GetRight()) {
-                if (is_hover && item.tip.IsEmpty())
-                    SetToolTip(text);
-                text = wxControl::Ellipsize(text, dc, wxELLIPSIZE_END,
-                                            rcContent.GetRight() - pt.x);
+                int max_text_width = rcContent.GetRight() - pt.x;
+                if (max_text_width <= 0) {
+                    text.clear();
+                } else {
+                    if (is_hover && item.tip.IsEmpty())
+                        SetToolTip(text);
+                    text = wxControl::Ellipsize(text, dc, wxELLIPSIZE_END, max_text_width);
+                }
             }
             pt.y += (rcContent.height - textSize.y) / 2;
             dc.SetFont(GetFont());
@@ -529,6 +558,7 @@ void DropDown::messureSize()
     if (!need_sync) return;
     textSize = wxSize();
     iconSize = wxSize();
+    actionIconWidth = 0;
     count = 0;
     wxClientDC dc(GetParent() ? GetParent() : this);
     dc.SetFont(GetFont());
@@ -565,8 +595,13 @@ void DropDown::messureSize()
                 size1.x += size2.x + (text_off ? 0 : 5);
             }
         }
+        if (item.action_icon.IsOk())
+            actionIconWidth = std::max(actionIconWidth, GetBmpSize(item.action_icon).x);
         if (size1.x > textSize.x) textSize = size1;
     }
+    // Every row leaves room for the action column, as render() and actionColumn() lay it out.
+    if (actionIconWidth > 0)
+        textSize.x += actionIconWidth + FromDIP(16);
     if (!align_icon) iconSize.x = 0;
     wxSize szContent = textSize;
     if (szContent.x < FromDIP(120) && !use_content_width)
@@ -636,6 +671,11 @@ void DropDown::messureSize()
             e.SetId(GetId());
             GetEventHandler()->ProcessEvent(e);
         });
+        subDropDown->Bind(EVT_DROPDOWN_ITEM_ACTION, [this](wxCommandEvent &e) {
+            e.SetEventObject(this);
+            e.SetId(GetId());
+            GetEventHandler()->ProcessEvent(e);
+        });
     }
     need_sync = false;
 }
@@ -714,6 +754,15 @@ void DropDown::mouseReleased(wxMouseEvent& event)
         if (hover_item < 0)
             return;
         if (hover_item >= 0 && (subDropDown == nullptr || subDropDown->group.empty())) { // not moved
+            int index = hoverIndex();
+            if (index >= 0 && items[index].action_icon.IsOk()) {
+                const auto action_column = actionColumn();
+                if (event.GetX() >= action_column.first && event.GetX() < action_column.second) {
+                    sendDropDownActionEvent(index);
+                    paintNow();
+                    return;
+                }
+            }
             sendDropDownEvent();
             if (mainDropDown)
                 mainDropDown->hover_item = -1; // To Dismiss mainDropDown
@@ -830,6 +879,17 @@ void DropDown::sendDropDownEvent()
     GetEventHandler()->ProcessEvent(event);
 }
 
+void DropDown::sendDropDownActionEvent(int index)
+{
+    if (index < 0 || index >= int(items.size()) || (items[index].style & DD_ITEM_STYLE_DISABLED))
+        return;
+    wxCommandEvent event(EVT_DROPDOWN_ITEM_ACTION, GetId());
+    event.SetEventObject(this);
+    event.SetInt(index);
+    event.SetString(items[index].text);
+    GetEventHandler()->ProcessEvent(event);
+}
+
 void DropDown::Dismiss()
 {
     if (subDropDown && subDropDown->IsShown())

src/slic3r/GUI/Widgets/DropDown.hpp

@@ -5,6 +5,7 @@
 #include <wx/event.h>
 #include <vector>
 #include <cstddef>
+#include <utility>
 #include <wx/gdicmn.h>
 #include "slic3r/GUI/Widgets/StateColor.hpp"
 #include <boost/date_time/posix_time/ptime.hpp>
@@ -27,6 +28,7 @@ class wxWindow;
 #define DD_ITEM_STYLE_DIMMED      0x0004 // gray text, but still selectable
 
 wxDECLARE_EVENT(EVT_DISMISS, wxCommandEvent);
+wxDECLARE_EVENT(EVT_DROPDOWN_ITEM_ACTION, wxCommandEvent);
 
 class DropDown : public PopupWindow
 {
@@ -37,6 +39,7 @@ public:
         wxString text_static_tips;// display static tips for TextInput.eg.PrinterInfoBox
         wxBitmap icon;
         wxBitmap icon_textctrl;// display icon for TextInput.eg.PrinterInfoBox
+        wxBitmap action_icon;
         void *   data{nullptr};
         wxString group_key{};
         wxString group_label{};
@@ -65,6 +68,7 @@ private:
 
     wxSize textSize;
     wxSize iconSize;
+    int    actionIconWidth = 0;
     wxSize rowSize;
 
     StateHandler state_handler;
@@ -135,6 +139,7 @@ private:
     int hoverIndex();
 
     int selectedItem();
+    std::pair<int, int> actionColumn() const;
 
     friend class ComboBox;
     void messureSize();
@@ -148,6 +153,7 @@ private:
     void mouseWheelMoved(wxMouseEvent &event);
 
     void sendDropDownEvent();
+    void sendDropDownActionEvent(int index);
 
 
     DECLARE_EVENT_TABLE()

tests/libslic3r/test_3mf.cpp

@@ -2043,3 +2043,40 @@ TEST_CASE("3MF XML entries declaring more than an int can hold fail to load", "[
         CHECK_FALSE(parser.check_3mf_from_prusa(path));
     }
 }
+
+TEST_CASE("Loading a gcode.3mf from a stream keeps the plate's pick and pattern file paths", "[3mf][Regression]")
+{
+    Model model;
+    REQUIRE(load_stl((std::string(TEST_DATA_DIR) + "/test_3mf/Prusa.stl").c_str(), &model));
+    model.add_default_instances();
+    ScopedTemporaryDir backup_dir("orca_pick");
+    model.set_backup_path(backup_dir.string());
+    DynamicPrintConfig config = DynamicPrintConfig::full_print_config();
+
+    auto plate = std::make_unique<PlateData>();
+    plate->plate_index       = 0;
+    plate->pick_file         = (backup_dir.path() / "pick.png").string();
+    plate->pattern_bbox_file = (backup_dir.path() / "plate.json").string();
+
+    ScopedTemporaryFile temp(".3mf");
+    const std::string   test_file = temp.string();
+    StoreParams store_params;
+    store_params.path   = test_file.c_str();
+    store_params.model  = &model;
+    store_params.config = &config;
+    store_params.plate_data_list.push_back(plate.get());
+    store_params.strategy = SaveStrategy::Zip64 | SaveStrategy::Silence;
+    REQUIRE(store_bbs_3mf(store_params));
+
+    boost::nowide::ifstream in(test_file, std::ios::binary);
+    Model              dst_model;
+    DynamicPrintConfig dst_config;
+    PlateDataPtrs      dst_plates;
+    Semver             file_version;
+    dst_model.set_backup_path(backup_dir.string());
+    REQUIRE(load_gcode_3mf_from_stream(in, &dst_config, &dst_model, &dst_plates, &file_version));
+    REQUIRE(dst_plates.size() == 1);
+    CHECK(dst_plates.front()->pick_file == "Metadata/pick_1.png");
+    CHECK(dst_plates.front()->pattern_bbox_file == "Metadata/plate_1.json");
+    release_PlateData_list(dst_plates);
+}