Stop Exporting Names Through Usings in GUI and Voronoi Headers

Each of these headers put a using or namespace alias at global or
namespace scope, which every includer inherited:

- BBLTopbar.hpp: "using namespace Slic3r::GUI;" at global scope, reached
  through MainFrame.hpp. Seven source files used GUI names unqualified
  outside the namespace because of it, one of them as "::RadioBox".
- IMSlider.hpp and TickCode.hpp: "using namespace CustomGCode;" inside
  Slic3r.
- ProjectTask.hpp, Jobs/PrintJob.hpp and ConfigWizard_private.hpp:
  "namespace fs = boost::filesystem;". PresetBundle.cpp and GUI_App.cpp
  had no alias of their own.
- VoronoiUtils.hpp: "using VD = Slic3r::Geometry::VoronoiDiagram;" at
  global scope.

The headers now spell the names out. Source files that used them get
the qualifier, or a using of their own where there are many uses.

src/libslic3r/Fill/FillSpiralInset.cpp

@@ -352,6 +352,16 @@ void FillSpiralInset::_fill_surface_single(const FillParams& params,
     assert(params.use_arachne);
     assert(this->print_config != nullptr && this->print_object_config != nullptr);
 
+    // Internal solid infill must not add Arachne's standalone thin walls: one of those walls can
+    // become the extra centre point after the spiral has finished. Top and bottom surfaces keep
+    // Arachne, including the centre plug handled by generate_spiral_insets().
+    if (params.extrusion_role == erSolidInfill) {
+        Polylines polylines;
+        this->_fill_surface_single(params, thickness_layers, direction, expolygon, polylines);
+        append(thick_polylines_out, to_thick_polylines(std::move(polylines), scaled<coord_t>(this->spacing)));
+        return;
+    }
+
     // Only a solid surface is worth the variable width walls; a sparse one falls back to plain loops.
     if (params.density <= 0.9999f || params.dont_adjust) {
         Polylines polylines;

src/libslic3r/Geometry/Voronoi.cpp

@@ -16,6 +16,7 @@
 
 namespace Slic3r::Geometry {
 
+using VD                          = VoronoiDiagram;
 using PolygonsSegmentIndexConstIt = std::vector<Arachne::PolygonsSegmentIndex>::const_iterator;
 using LinesIt                     = Lines::iterator;
 using ColoredLinesConstIt         = ColoredLines::const_iterator;

src/libslic3r/Geometry/VoronoiUtils.cpp

@@ -20,6 +20,7 @@
 
 namespace Slic3r::Geometry {
 
+using VD                          = VoronoiDiagram;
 using PolygonsSegmentIndexConstIt = std::vector<Arachne::PolygonsSegmentIndex>::const_iterator;
 using LinesIt                     = Lines::iterator;
 using ColoredLinesIt              = ColoredLines::iterator;

src/libslic3r/Geometry/VoronoiUtils.hpp

@@ -10,8 +10,6 @@
 #include "libslic3r/Point.hpp"
 #include "libslic3r/libslic3r.h"
 
-using VD = Slic3r::Geometry::VoronoiDiagram;
-
 namespace Slic3r::Geometry {
 
 // Represent trapezoid Voronoi cell around segment.
@@ -19,8 +17,8 @@ template<typename PT> struct SegmentCellRange
 {
     const PT             source_segment_start_point; // The start point of the source segment of this cell.
     const PT             source_segment_end_point;   // The end point of the source segment of this cell.
-    const VD::edge_type *edge_begin = nullptr;       // The edge of the Voronoi diagram where the loop around the cell starts.
-    const VD::edge_type *edge_end   = nullptr;       // The edge of the Voronoi diagram where the loop around the cell ends.
+    const VoronoiDiagram::edge_type *edge_begin = nullptr;       // The edge of the Voronoi diagram where the loop around the cell starts.
+    const VoronoiDiagram::edge_type *edge_end   = nullptr;       // The edge of the Voronoi diagram where the loop around the cell ends.
 
     SegmentCellRange() = delete;
     explicit SegmentCellRange(const PT &source_segment_start_point, const PT &source_segment_end_point)
@@ -34,8 +32,8 @@ template<typename PT> struct SegmentCellRange
 template<typename PT> struct PointCellRange
 {
     const PT             source_point;  // The source point of this cell.
-    const VD::edge_type *edge_begin = nullptr; // The edge of the Voronoi diagram where the loop around the cell starts.
-    const VD::edge_type *edge_end   = nullptr; // The edge of the Voronoi diagram where the loop around the cell ends.
+    const VoronoiDiagram::edge_type *edge_begin = nullptr; // The edge of the Voronoi diagram where the loop around the cell starts.
+    const VoronoiDiagram::edge_type *edge_end   = nullptr; // The edge of the Voronoi diagram where the loop around the cell ends.
 
     PointCellRange() = delete;
     explicit PointCellRange(const PT &source_point) : source_point(source_point) {}
@@ -46,20 +44,20 @@ template<typename PT> struct PointCellRange
 class VoronoiUtils
 {
 public:
-    static Vec2i64 to_point(const VD::vertex_type *vertex);
+    static Vec2i64 to_point(const VoronoiDiagram::vertex_type *vertex);
 
-    static Vec2i64 to_point(const VD::vertex_type &vertex);
+    static Vec2i64 to_point(const VoronoiDiagram::vertex_type &vertex);
 
-    static bool is_finite(const VD::vertex_type &vertex);
+    static bool is_finite(const VoronoiDiagram::vertex_type &vertex);
 
-    static VD::vertex_type make_rotated_vertex(VD::vertex_type &vertex, double angle);
+    static VoronoiDiagram::vertex_type make_rotated_vertex(VoronoiDiagram::vertex_type &vertex, double angle);
 
     template<typename SegmentIterator>
     static typename boost::polygon::enable_if<
         typename boost::polygon::gtl_if<typename boost::polygon::is_segment_concept<
             typename boost::polygon::geometry_concept<typename std::iterator_traits<SegmentIterator>::value_type>::type>::type>::type,
         typename std::iterator_traits<SegmentIterator>::reference>::type
-    get_source_segment(const VD::cell_type &cell, SegmentIterator segment_begin, SegmentIterator segment_end);
+    get_source_segment(const VoronoiDiagram::cell_type &cell, SegmentIterator segment_begin, SegmentIterator segment_end);
 
     template<typename SegmentIterator>
     static typename boost::polygon::enable_if<
@@ -73,7 +71,7 @@ public:
         typename boost::polygon::gtl_if<typename boost::polygon::is_segment_concept<
             typename boost::polygon::geometry_concept<typename std::iterator_traits<SegmentIterator>::value_type>::type>::type>::type,
         Arachne::PolygonsPointIndex>::type
-    get_source_point_index(const VD::cell_type &cell, SegmentIterator segment_begin, SegmentIterator segment_end);
+    get_source_point_index(const VoronoiDiagram::cell_type &cell, SegmentIterator segment_begin, SegmentIterator segment_end);
 
     /**
      * Discretize a parabola based on (approximate) step size.
@@ -113,7 +111,7 @@ public:
             typename boost::polygon::geometry_concept<typename std::iterator_traits<SegmentIterator>::value_type>::type>::type>::type,
         Geometry::SegmentCellRange<
             typename boost::polygon::segment_point_type<typename std::iterator_traits<SegmentIterator>::value_type>::type>>::type
-    compute_segment_cell_range(const VD::cell_type &cell, SegmentIterator segment_begin, SegmentIterator segment_end);
+    compute_segment_cell_range(const VoronoiDiagram::cell_type &cell, SegmentIterator segment_begin, SegmentIterator segment_end);
 
     /**
      * Compute the range of line segments that surround a cell of the skeletal
@@ -140,19 +138,19 @@ public:
             typename boost::polygon::geometry_concept<typename std::iterator_traits<SegmentIterator>::value_type>::type>::type>::type,
         Geometry::PointCellRange<
             typename boost::polygon::segment_point_type<typename std::iterator_traits<SegmentIterator>::value_type>::type>>::type
-    compute_point_cell_range(const VD::cell_type &cell, SegmentIterator segment_begin, SegmentIterator segment_end);
+    compute_point_cell_range(const VoronoiDiagram::cell_type &cell, SegmentIterator segment_begin, SegmentIterator segment_end);
 
     template<typename T> static bool is_in_range(double value)
     {
         return double(std::numeric_limits<T>::lowest()) <= value && value <= double(std::numeric_limits<T>::max());
     }
 
-    template<typename T> static bool is_in_range(const VD::vertex_type &vertex)
+    template<typename T> static bool is_in_range(const VoronoiDiagram::vertex_type &vertex)
     {
         return VoronoiUtils::is_finite(vertex) && is_in_range<T>(vertex.x()) && is_in_range<T>(vertex.y());
     }
 
-    template<typename T> static bool is_in_range(const VD::edge_type &edge)
+    template<typename T> static bool is_in_range(const VoronoiDiagram::edge_type &edge)
     {
         if (edge.vertex0() == nullptr || edge.vertex1() == nullptr)
             return false;

src/libslic3r/MultiMaterialSegmentation.cpp

@@ -63,6 +63,7 @@ namespace Slic3r { enum class EnforcerBlockerType : int8_t; }
 
 namespace Slic3r {
 using boost::polygon::voronoi_diagram;
+using VD = Geometry::VoronoiDiagram;
 
 static inline Point mk_point(const Voronoi::VD::vertex_type *point) { return {coord_t(point->x()), coord_t(point->y())}; }
 

src/libslic3r/PresetBundle.cpp

@@ -80,6 +80,8 @@
 #include <vector>
 #include <utility>
 
+namespace fs = boost::filesystem;
+
 // Mark string for localization and translate.
 #define L(s) Slic3r::I18N::translate(s)
 

src/libslic3r/ProjectTask.hpp

@@ -11,8 +11,6 @@
 #include <boost/filesystem/path.hpp>
 #include <boost/filesystem.hpp>
 
-namespace fs = boost::filesystem;
-
 namespace Slic3r {
 
 class BBLProject;
@@ -208,7 +206,7 @@ public:
     std::string     task_profile_id;    /* profile id*/
     std::string     task_name;          /* task name, generally filename as task name */
     std::string     task_file;          /* local full file path of 3mf or gcode */
-    fs::path        task_path;          /* local path of 3mf or gcode */
+    boost::filesystem::path task_path;          /* local path of 3mf or gcode */
     std::string     task_gcode_in_3mf;  /* gcode in 3mf */
     std::string     task_create_time;   /* time created by cloud */
     std::string     task_thumbnail_url; /* url of task thumbnail */
@@ -326,7 +324,7 @@ public:
     std::string     project_url_md5;        /* md5 of project url file */
     std::string     project_name;
     std::string     project_3mf_file;
-    fs::path        project_path;
+    boost::filesystem::path project_path;
     std::string     project_content;
     std::string     project_country_code;
 

src/slic3r/GUI/BBLTopbar.cpp

@@ -41,6 +41,7 @@
 #define TOPBAR_TITLE_WIDTH  300
 
 using namespace Slic3r;
+using namespace Slic3r::GUI;
 
 enum CUSTOM_ID
 {

src/slic3r/GUI/BBLTopbar.hpp

@@ -18,8 +18,6 @@ class wxMouseCaptureLostEvent;
 class wxMouseEvent;
 class wxWindow;
 
-using namespace Slic3r::GUI;
-
 class CenteredTitle : public wxControl
 {
 public:

src/slic3r/GUI/BackgroundSlicingProcess.cpp

@@ -218,7 +218,7 @@ std::string BackgroundSlicingProcess::output_filepath_for_project(const boost::f
 void BackgroundSlicingProcess::process_fff()
 {
     assert(m_print == m_fff_print);
-    PresetBundle& preset_bundle   = *wxGetApp().preset_bundle;
+    PresetBundle& preset_bundle   = *GUI::wxGetApp().preset_bundle;
     m_fff_print->is_BBL_printer() = preset_bundle.is_bbl_vendor();
     // BBS: add the logic to process from an existed gcode file
     if (m_print->finished()) {
@@ -727,7 +727,7 @@ StringObjectException BackgroundSlicingProcess::validate(std::vector<StringObjec
     assert(m_print != nullptr);
     assert(m_print == m_fff_print);
 
-    m_fff_print->is_BBL_printer() = wxGetApp().preset_bundle->is_bbl_vendor();
+    m_fff_print->is_BBL_printer() = GUI::wxGetApp().preset_bundle->is_bbl_vendor();
     return m_print->validate(warnings, collison_polygons, height_polygons);
 }
 

src/slic3r/GUI/ConfigWizard_private.hpp

@@ -43,8 +43,6 @@
 #include <wx/types.h>
 
 
-namespace fs = boost::filesystem;
-
 namespace Slic3r {
 namespace GUI {
 
@@ -88,7 +86,7 @@ struct Bundle
 	// cache or its profile JSONs, whichever is usable.
 	// Returns false if not loaded. Reason for that is logged as boost::log error.
 	//BBS: set BBL as default
-	bool load(fs::path dir, const std::string &vendor_name, bool is_in_resources, bool is_bbl_bundle = false);
+	bool load(boost::filesystem::path dir, const std::string &vendor_name, bool is_in_resources, bool is_bbl_bundle = false);
 
 	const std::string& vendor_id() const { return vendor_profile->id; }
 };

src/slic3r/GUI/GCodeViewer.cpp

@@ -3622,7 +3622,7 @@ void GCodeViewer::render_legend(float &legend_height, int canvas_width, int canv
             if (extruder_id + 1 != static_cast<unsigned char>(item.extruder))
                 continue;
 
-            if (item.type != ColorChange)
+            if (item.type != CustomGCode::ColorChange)
                 continue;
 
             if (!zs_built) {
@@ -4789,10 +4789,10 @@ void GCodeViewer::render_legend(float &legend_height, int canvas_width, int canv
             ImGui::SameLine();
 
             switch (custom_gcode.type) {
-            case PausePrint: imgui.text(cgcode_pause_str); break;
-            case Template: imgui.text(cgcode_template_str); break;
-            case ToolChange: imgui.text(cgcode_toolchange_str); break;
-            case Custom: imgui.text(cgcode_custom_str); break;
+            case CustomGCode::PausePrint: imgui.text(cgcode_pause_str); break;
+            case CustomGCode::Template: imgui.text(cgcode_template_str); break;
+            case CustomGCode::ToolChange: imgui.text(cgcode_toolchange_str); break;
+            case CustomGCode::Custom: imgui.text(cgcode_custom_str); break;
             default: imgui.text(cgcode_unknown_str); break;
             }
             ImGui::SameLine(max_len);

src/slic3r/GUI/GLCanvas3D.cpp

@@ -184,12 +184,12 @@ static Slic3r::ColorRGBA DEFAULT_BG_LIGHT_COLOR_DARK = { 0.329f, 0.329f, 0.353f,
 static Slic3r::ColorRGBA ERROR_BG_LIGHT_COLOR        = { 0.753f, 0.192f, 0.039f, 1.0f };
 static Slic3r::ColorRGBA ERROR_BG_LIGHT_COLOR_DARK   = { 0.753f, 0.192f, 0.039f, 1.0f };
 
-void GLCanvas3D::update_render_colors()
+void Slic3r::GUI::GLCanvas3D::update_render_colors()
 {
     DEFAULT_BG_LIGHT_COLOR = ImGuiWrapper::from_ImVec4(RenderColor::colors[RenderCol_3D_Background]);
 }
 
-void GLCanvas3D::load_render_colors()
+void Slic3r::GUI::GLCanvas3D::load_render_colors()
 {
     RenderColor::colors[RenderCol_3D_Background] = ImGuiWrapper::to_ImVec4(DEFAULT_BG_LIGHT_COLOR);
 }
@@ -7970,9 +7970,16 @@ void GLCanvas3D::_render_fps_overlay(int fps) const
     const float margin = 10.0f * get_scale();
     const ImVec2 display_size = ImGui::GetIO().DisplaySize;
     ImVec2 pos(display_size.x - margin, margin);
+    // Last frame's size; zero until the overlay has been shown once.
+    const ImGuiWindow* self = ImGui::FindWindowByName("###fps_overlay");
+    const float left = pos.x - (self != nullptr ? self->Size.x : 0.0f);
     // The Preview legend takes the top-right corner.
     if (const ImGuiWindow* legend = ImGui::FindWindowByName("Legend"); m_canvas_type == ECanvasType::CanvasPreview && legend != nullptr && legend->Active)
         pos = ImVec2(legend->Pos.x - margin, legend->Pos.y);
+    // The toolbar row can reach the corner on a narrow canvas; stack the overlay below it then.
+    else if (m_main_toolbar.is_enabled() &&
+             get_main_toolbar_offset() + m_main_toolbar.get_width() + m_separator_toolbar.get_width() + m_gizmos.get_scaled_total_width() + m_assemble_view_toolbar.get_width() > left)
+        pos.y = std::max(m_main_toolbar.get_height(), m_gizmos.get_scaled_total_height()) + margin;
     ImGui::SetNextWindowPos(pos, ImGuiCond_Always, ImVec2(1.0f, 0.0f));
     ImGui::SetNextWindowBgAlpha(0.35f);
     ImGui::PushStyleVar(ImGuiStyleVar_WindowRounding, 8.0f * get_scale());

src/slic3r/GUI/GUI_App.cpp

@@ -309,6 +309,7 @@ typedef BOOL (WINAPI *LPFN_ISWOW64PROCESS2)(
     #include <gtk/gtk.h>
 #endif
 
+namespace fs = boost::filesystem;
 using namespace std::literals;
 namespace pt = boost::property_tree;
 

src/slic3r/GUI/GUI_Preview.cpp

@@ -396,7 +396,7 @@ void Preview::sys_color_changed()
     // m_layers_slider->sys_color_changed();
 }
 
-void Preview::on_tick_changed(Type type)
+void Preview::on_tick_changed(CustomGCode::Type type)
 {
     //if (type == Type::PausePrint) {
     //    m_schedule_background_process();

src/slic3r/GUI/IMSlider.cpp

@@ -46,6 +46,8 @@
 
 namespace Slic3r {
 
+using namespace CustomGCode;
+
 namespace GUI {
 
 // equal to 25 mm2

src/slic3r/GUI/IMSlider.hpp

@@ -20,7 +20,6 @@ struct IMGUI_API ImRect;
 
 namespace Slic3r {
 
-using namespace CustomGCode;
 class PrintObject;
 class Layer;
 
@@ -89,8 +88,8 @@ public:
     void SetSliderValues(const std::vector<double> &values);
     void SetSliderAlternateValues(const std::vector<double> &values) { m_alternate_values = values; }
 
-    Info GetTicksValues() const;
-    void SetTicksValues(const Info &custom_gcode_per_print_z);
+    CustomGCode::Info GetTicksValues() const;
+    void SetTicksValues(const CustomGCode::Info &custom_gcode_per_print_z);
     void SetLayersTimes(const std::vector<float> &layers_times, float total_time);
     void SetLayersTimes(const std::vector<double> &layers_times);
 
@@ -98,8 +97,8 @@ public:
     void SetDrawMode(DrawMode mode) { m_draw_mode = mode; }
     //BBS
     void SetExtraStyle(long style) { m_extra_style = style; }
-    void SetManipulationMode(Mode mode) { m_mode = mode; }
-    Mode GetManipulationMode() const { return m_mode; }
+    void SetManipulationMode(CustomGCode::Mode mode) { m_mode = mode; }
+    CustomGCode::Mode GetManipulationMode() const { return m_mode; }
     void SetModeAndOnlyExtruder(const bool is_one_extruder_printed_model, const int only_extruder, bool can_change_color);
     void SetExtruderColors(const std::vector<std::string> &extruder_colors);
 
@@ -117,8 +116,8 @@ public:
     void UseDefaultColors(bool def_colors_on) { m_ticks.set_default_colors(def_colors_on); }
 
     void on_mouse_wheel(wxMouseEvent& evt);
-    void post_ticks_changed_event(Type type = Unknown);
-    bool check_ticks_changed_event(Type type);
+    void post_ticks_changed_event(CustomGCode::Type type = CustomGCode::Unknown);
+    bool check_ticks_changed_event(CustomGCode::Type type);
     bool switch_one_layer_mode();
     void show_go_to_layer(bool show) { m_show_go_to_layer_dialog = show; }
 
@@ -130,9 +129,9 @@ public:
     bool is_need_post_tick_event() { return m_is_need_post_tick_changed_event; }
     void reset_post_tick_event(bool val = false) {
         m_is_need_post_tick_changed_event = val;
-        m_tick_change_event_type = Type::Unknown;
+        m_tick_change_event_type = CustomGCode::Type::Unknown;
     }
-    Type get_post_tick_event_type() { return m_tick_change_event_type; }
+    CustomGCode::Type get_post_tick_event_type() { return m_tick_change_event_type; }
 
     float m_scale = 1.0;
     void set_scale(float scale = 1.0);
@@ -143,7 +142,7 @@ public:
 
 protected:
     void add_custom_gcode(std::string custom_gcode);
-    void add_code_as_tick(Type type, int selected_extruder = -1);
+    void add_code_as_tick(CustomGCode::Type type, int selected_extruder = -1);
     void delete_tick(const TickCode& tick);
     void do_go_to_layer(size_t layer_number); //menu
     void correct_lower_value();
@@ -156,7 +155,7 @@ protected:
     void render_edit_menu(const TickCode& tick); //menu
     void draw_background_and_groove(const ImRect& bg_rect, const ImRect& groove);
     void draw_colored_band(const ImRect& groove, const ImRect& slideable_region);
-    void draw_custom_label_block(const ImVec2 anchor, Type type);
+    void draw_custom_label_block(const ImVec2 anchor, CustomGCode::Type type);
     void draw_ticks(const ImRect& slideable_region);
     void draw_tick_on_mouse_position(const ImRect& slideable_region);
     void show_tooltip(const TickCode& tick); //menu
@@ -217,7 +216,7 @@ private:
     void *m_delete_icon_id;
 
     DrawMode            m_draw_mode = dmRegular;
-    Mode                m_mode          = SingleExtruder;
+    CustomGCode::Mode   m_mode          = CustomGCode::SingleExtruder;
     int                 m_only_extruder = -1;
 
     long                m_style;
@@ -232,7 +231,7 @@ private:
     bool                     m_can_change_color;
     std::string              m_print_obj_idxs;
     bool                     m_is_need_post_tick_changed_event { false };
-    Type                     m_tick_change_event_type;
+    CustomGCode::Type        m_tick_change_event_type;
 
     std::vector<double> m_alternate_values;
 

src/slic3r/GUI/Jobs/PrintJob.hpp

@@ -12,8 +12,6 @@
 #include "Job.hpp"
 #include "slic3r/GUI/DeviceCore/DevStorage.h" 
 
-namespace fs = boost::filesystem;
-
 namespace Slic3r {
 namespace GUI {
 
@@ -26,9 +24,9 @@ class PrintPrepareData
 public:
     bool            is_from_plater = true;
     int             plate_idx;
-    fs::path        _3mf_path;
-    fs::path        _3mf_config_path;
-    fs::path        _temp_path;
+    boost::filesystem::path _3mf_path;
+    boost::filesystem::path _3mf_config_path;
+    boost::filesystem::path _temp_path;
     PrintPrepareData() {
         plate_idx = 0;
     }

src/slic3r/GUI/Plater.cpp

@@ -8111,13 +8111,13 @@ Plater::priv::priv(Plater *q, MainFrame *main_frame)
         preview->get_wxglcanvas()->Bind(EVT_GLCANVAS_TAB, [this](SimpleEvent&) { select_next_view_3D(); });
         preview->get_wxglcanvas()->Bind(EVT_GLCANVAS_COLLAPSE_SIDEBAR, [this](SimpleEvent&) { this->q->collapse_sidebar(!this->q->is_sidebar_collapsed());  });
         preview->get_wxglcanvas()->Bind(EVT_CUSTOMEVT_TICKSCHANGED, [this](wxCommandEvent& event) {
-            Type tick_event_type = (Type)event.GetInt();
+            CustomGCode::Type tick_event_type = (CustomGCode::Type)event.GetInt();
             Model& model = wxGetApp().plater()->model();
             //BBS: replace model custom gcode with current plate custom gcode
             model.plates_custom_gcodes[model.curr_plate_index] = preview->get_canvas3d()->get_gcode_viewer().get_layers_slider()->GetTicksValues();
 
             // BBS set to invalid state only
-            if (tick_event_type == Type::ToolChange || tick_event_type == Type::Custom || tick_event_type == Type::Template || tick_event_type == Type::PausePrint) {
+            if (tick_event_type == CustomGCode::Type::ToolChange || tick_event_type == CustomGCode::Type::Custom || tick_event_type == CustomGCode::Type::Template || tick_event_type == CustomGCode::Type::PausePrint) {
                 PartPlate *plate = this->q->get_partplate_list().get_curr_plate();
                 if (plate) {
                     plate->update_slice_result_valid_state(false);
@@ -20544,7 +20544,7 @@ void Plater::on_filaments_delete(size_t num_filaments, size_t filament_id, int r
 
     // update customize gcode
     for (auto item = p->model.plates_custom_gcodes.begin(); item != p->model.plates_custom_gcodes.end(); ++item) {
-        auto iter = std::remove_if(item->second.gcodes.begin(), item->second.gcodes.end(), [filament_id](const Item& gcode_item) {
+        auto iter = std::remove_if(item->second.gcodes.begin(), item->second.gcodes.end(), [filament_id](const CustomGCode::Item& gcode_item) {
             return (gcode_item.type == CustomGCode::Type::ToolChange && gcode_item.extruder == filament_id + 1);
         });
         if (replace_filament_id == -1)

src/slic3r/GUI/PresetComboBoxes.cpp

@@ -2177,7 +2177,7 @@ void GUI::CalibrateFilamentComboBox::OnSelect(wxCommandEvent &evt)
     wxPostEvent(m_parent, e);
 }
 
-void PlaterPresetComboBox::sys_color_changed()
+void GUI::PlaterPresetComboBox::sys_color_changed()
 {
     PresetComboBox::sys_color_changed();
     if (clr_picker) {

src/slic3r/GUI/PrintHostDialogs.cpp

@@ -1752,8 +1752,8 @@ void ElegooPrintHostSendDialog::init() {
     }
 
     {
-        auto radioBoxA = new ::RadioBox(this);
-        auto radioBoxB = new ::RadioBox(this);
+        auto radioBoxA = new RadioBox(this);
+        auto radioBoxB = new RadioBox(this);
         if (m_BedType == BedType::btPC)
             radioBoxB->SetValue(true);
         else

src/slic3r/GUI/Tab.cpp

@@ -2928,7 +2928,7 @@ void TabPrint::build()
         optgroup->append_single_option_line("skin_infill_line_width", "strength_settings_patterns#locked-zag");
         optgroup->append_single_option_line("skeleton_infill_line_width", "strength_settings_patterns#locked-zag");
         optgroup->append_single_option_line("symmetric_infill_y_axis", "strength_settings_infill#symmetric-infill-y-axis");
-        optgroup->append_single_option_line("infill_complete_top", "strength_settings_infill#infill-complete-top");
+        optgroup->append_single_option_line("infill_complete_top", "strength_settings_patterns#fill-pattern-tops");
         optgroup->append_single_option_line("infill_shift_step", "strength_settings_patterns#cross-hatch");
         optgroup->append_single_option_line("lateral_lattice_angle_1", "strength_settings_patterns#lateral-lattice");
         optgroup->append_single_option_line("lateral_lattice_angle_2", "strength_settings_patterns#lateral-lattice");

src/slic3r/GUI/TickCode.cpp

@@ -6,6 +6,9 @@
 #include <set>
 
 namespace Slic3r {
+
+using namespace CustomGCode;
+
 namespace GUI {
 std::string TickCodeInfo::get_color_for_tick(TickCode tick, Type type, const int extruder)
 {

src/slic3r/GUI/TickCode.hpp

@@ -7,7 +7,6 @@
 #include <vector>
 
 namespace Slic3r {
-using namespace CustomGCode;
 namespace GUI {
 
 struct TickCode
@@ -16,7 +15,7 @@ struct TickCode
     bool operator>(const TickCode& other) const { return other.tick < this->tick; }
 
     int         tick = 0;
-    Type        type = ColorChange;
+    CustomGCode::Type type = CustomGCode::ColorChange;
     int         extruder = 0;
     std::string color;
     std::string extra;
@@ -31,22 +30,22 @@ class TickCodeInfo
 
     std::vector<std::string>* m_colors{ nullptr };// reference to IMSlider::m_extruder_colors
 
-    std::string get_color_for_tick(TickCode tick, Type type, const int extruder);
+    std::string get_color_for_tick(TickCode tick, CustomGCode::Type type, const int extruder);
 
 public:
     std::set<TickCode>  ticks{};
-    Mode                mode = Undef;
+    CustomGCode::Mode   mode = CustomGCode::Undef;
 
     bool empty() const { return ticks.empty(); }
     void set_pause_print_msg(const std::string& message) { pause_print_msg = message; }
 
-    bool add_tick(const int tick, Type type, int extruder, double print_z);
+    bool add_tick(const int tick, CustomGCode::Type type, int extruder, double print_z);
     bool edit_tick(std::set<TickCode>::iterator it, double print_z);
-    void switch_code(Type type_from, Type type_to);
-    bool switch_code_for_tick(std::set<TickCode>::iterator it, Type type_to, const int extruder);
-    void erase_all_ticks_with_code(Type type);
+    void switch_code(CustomGCode::Type type_from, CustomGCode::Type type_to);
+    bool switch_code_for_tick(std::set<TickCode>::iterator it, CustomGCode::Type type_to, const int extruder);
+    void erase_all_ticks_with_code(CustomGCode::Type type);
 
-    bool            has_tick_with_code(Type type);
+    bool            has_tick_with_code(CustomGCode::Type type);
     bool            has_tick(int tick);
 
     void suppress_plus(bool suppress) { m_suppress_plus = suppress; }

src/slic3r/Utils/SimplyPrint.cpp

@@ -115,7 +115,7 @@ static void set_auth(Http& http, const std::string& access_token) { http.header(
 
 static bool should_open_in_external_browser()
 {
-    const auto& app = wxGetApp();
+    const auto& app = GUI::wxGetApp();
 
     if (app.preset_bundle->use_bbl_device_tab()) {
         // When using bbl device tab, we always need to open external browser

src/slic3r/plugin/host/PluginHostUi.cpp

@@ -565,7 +565,7 @@ void progress_close(int id)
     });
 }
 
-void plater_notification(NotificationManager::NotificationLevel notification_level, const std::string& text,
+void plater_notification(GUI::NotificationManager::NotificationLevel notification_level, const std::string& text,
                          const std::string& hypertext, py::object on_click)
 {
     const std::string plugin_key = PluginAuditManager::instance().current_plugin();
@@ -600,7 +600,7 @@ void plater_notification(NotificationManager::NotificationLevel notification_lev
     }
 
     run_on_ui_blocking([notification_level, text, hypertext, callback = std::move(callback)]() mutable {
-        wxGetApp().plater()->get_notification_manager()->push_notification(NotificationType::CustomNotification, notification_level, text,
+        GUI::wxGetApp().plater()->get_notification_manager()->push_notification(GUI::NotificationType::CustomNotification, notification_level, text,
                                                                            hypertext, std::move(callback));
     });
 }
@@ -713,16 +713,16 @@ void PluginHostUi::RegisterBindings(pybind11::module_& host)
            py::arg("maximum") = 100, py::arg("style") = wxPD_APP_MODAL | wxPD_AUTO_HIDE,
            "Create a native progress dialog and return a ProgressDialog handle.");
 
-    py::enum_<NotificationManager::NotificationLevel>(ui, "NotificationLevel")
-        .value("ProgressBarNotificationLevel", NotificationManager::NotificationLevel::ProgressBarNotificationLevel)
-        .value("HintNotificationLevel", NotificationManager::NotificationLevel::HintNotificationLevel)
-        .value("RegularNotificationLevel", NotificationManager::NotificationLevel::RegularNotificationLevel)
-        .value("PrintInfoNotificationLevel", NotificationManager::NotificationLevel::PrintInfoNotificationLevel)
-        .value("PrintInfoShortNotificationLevel", NotificationManager::NotificationLevel::PrintInfoShortNotificationLevel)
-        .value("ImportantNotificationLevel", NotificationManager::NotificationLevel::ImportantNotificationLevel)
-        .value("WarningNotificationLevel", NotificationManager::NotificationLevel::WarningNotificationLevel)
-        .value("SeriousWarningNotificationLevel", NotificationManager::NotificationLevel::SeriousWarningNotificationLevel)
-        .value("ErrorNotificationLevel", NotificationManager::NotificationLevel::ErrorNotificationLevel)
+    py::enum_<GUI::NotificationManager::NotificationLevel>(ui, "NotificationLevel")
+        .value("ProgressBarNotificationLevel", GUI::NotificationManager::NotificationLevel::ProgressBarNotificationLevel)
+        .value("HintNotificationLevel", GUI::NotificationManager::NotificationLevel::HintNotificationLevel)
+        .value("RegularNotificationLevel", GUI::NotificationManager::NotificationLevel::RegularNotificationLevel)
+        .value("PrintInfoNotificationLevel", GUI::NotificationManager::NotificationLevel::PrintInfoNotificationLevel)
+        .value("PrintInfoShortNotificationLevel", GUI::NotificationManager::NotificationLevel::PrintInfoShortNotificationLevel)
+        .value("ImportantNotificationLevel", GUI::NotificationManager::NotificationLevel::ImportantNotificationLevel)
+        .value("WarningNotificationLevel", GUI::NotificationManager::NotificationLevel::WarningNotificationLevel)
+        .value("SeriousWarningNotificationLevel", GUI::NotificationManager::NotificationLevel::SeriousWarningNotificationLevel)
+        .value("ErrorNotificationLevel", GUI::NotificationManager::NotificationLevel::ErrorNotificationLevel)
         .export_values();
 
     ui.def("push_notification", &plater_notification, py::arg("notification_level"), py::arg("text"),