fix: application crashes on wayland when swtiching to device tab for Bambu printers

* Update GCodeViewer.cpp

* improve reading feature types and enable actual flow rate

* Update GCodeViewer.cpp

* Update GCodeViewer.cpp

* Update GCodeViewer.cpp

* Apply suggestion from @Copilot

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* hide actual speed and actual flow

---------

Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

localization/i18n/OrcaSlicer.pot

@@ -13121,6 +13121,9 @@ msgstr ""
 msgid "Contour"
 msgstr ""
 
+msgid "Hole"
+msgstr ""
+
 msgid "Contour and hole"
 msgstr ""
 
@@ -14209,7 +14212,10 @@ msgstr ""
 msgid "Raft contact Z distance"
 msgstr ""
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
 
 msgid "Raft expansion"
@@ -14980,13 +14986,16 @@ msgstr ""
 msgid "Top Z distance"
 msgstr ""
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
 msgstr ""
 
 msgid "Bottom Z distance"
 msgstr ""
 
-msgid "The Z gap between the bottom support interface and object."
+msgid ""
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
 msgstr ""
 
 msgid "Support/raft base"

localization/i18n/ca/OrcaSlicer_ca.po

@@ -15232,6 +15232,9 @@ msgstr "Només pintat"
 msgid "Contour"
 msgstr "Contorn"
 
+msgid "Hole"
+msgstr "Forat"
+
 msgid "Contour and hole"
 msgstr "Contorn i forat"
 
@@ -16644,10 +16647,14 @@ msgstr "Model d'impressora"
 msgid "Raft contact Z distance"
 msgstr "Distància Z de contacte de la Vora d'Adherència"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
-"Distància Z entre l'objecte i la Vora d'Adherència. S'ignorarà per a "
-"interfície soluble"
+"Espai Z entre la vora d'Adherència i l'objecte. "
+"Si la distància Z superior del suport és 0, aquest valor s'ignora i l'objecte "
+"s'imprimeix en contacte directe amb la vora d'Adherència (sense espai)."
 
 msgid "Raft expansion"
 msgstr "Expansió de la Vora d'Adherència"
@@ -17628,14 +17635,20 @@ msgstr "Ignora els voladissos petits que possiblement no requereixen suport."
 msgid "Top Z distance"
 msgstr "Distància Z superior"
 
-msgid "The Z gap between the top support interface and object."
-msgstr "La distància z entre la interfície de suport superior i l'objecte"
+msgid "Z gap between the support's top and object."
+msgstr "Espai Z entre la part superior del suport i l'objecte."
 
 msgid "Bottom Z distance"
 msgstr "Distància Z inferior"
 
-msgid "The Z gap between the bottom support interface and object."
-msgstr "La distància z entre la interfície de suport inferior i l'objecte"
+msgid ""
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"Espai Z entre l'objecte i la part inferior del suport. "
+"Si la distància Z superior del suport és 0 i la part inferior té capes d'interfície, aquest "
+"valor s'ignora i el suport s'imprimeix en contacte directe amb l'objecte (sense espai)."
 
 msgid "Support/raft base"
 msgstr "Base del Suport/Vora d'Adherència"

localization/i18n/cs/OrcaSlicer_cs.po

@@ -14821,6 +14821,9 @@ msgstr "Painted only"
 msgid "Contour"
 msgstr "Obrys"
 
+msgid "Hole"
+msgstr "Otvor"
+
 msgid "Contour and hole"
 msgstr "Obrys a otvor"
 
@@ -16178,9 +16181,14 @@ msgstr "Varianta tiskárny"
 msgid "Raft contact Z distance"
 msgstr "Z vzdálenost kontaktu raftu"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
-"Z mezera mezi objektem a raftem. Ignorováno pro rozpustitelné rozhraní."
+"Z mezera mezi raftem a objektem. "
+"Pokud je Horní Z vzdálenost podpory 0, tato hodnota se ignoruje "
+"a objekt se tiskne v přímém kontaktu s raftem (bez mezery)."
 
 msgid "Raft expansion"
 msgstr "Rozšíření raftu"
@@ -17131,14 +17139,20 @@ msgstr "Ignore small overhangs that possibly don't require support."
 msgid "Top Z distance"
 msgstr "Horní vzdálenost v ose Z"
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
 msgstr "Z mezera mezi horním rozhraním podpory a objektem."
 
 msgid "Bottom Z distance"
 msgstr "Spodní vzdálenost v ose Z"
 
-msgid "The Z gap between the bottom support interface and object."
-msgstr "Z mezera mezi spodním rozhraním podpory a objektem."
+msgid ""
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"Z mezera mezi spodním rozhraním podpory a objektem. "
+"Pokud je Horní Z vzdálenost podpory 0 a spodek má vrstvy rozhraní, tato hodnota "
+"se ignoruje a podpora se tiskne v přímém kontaktu s objektem (bez mezery)."
 
 msgid "Support/raft base"
 msgstr "Podpora/základ raftu"

localization/i18n/de/OrcaSlicer_de.po

@@ -15357,6 +15357,9 @@ msgstr "Nur lackiert"
 msgid "Contour"
 msgstr "Kontur"
 
+msgid "Hole"
+msgstr "Loch"
+
 msgid "Contour and hole"
 msgstr "Kontur und Loch"
 
@@ -16764,9 +16767,14 @@ msgstr "Druckervariante"
 msgid "Raft contact Z distance"
 msgstr "Z Abstand Objekt Druckbasis "
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
-"Z-Abstand zwischen Objekt und Druckbasis. Bei löslicher Oberfläche ignoriert"
+"Z-Abstand zwischen Druckbasis (Raft) und Objekt. "
+"Wenn der obere Z-Abstand der Stützen ist 0, wird dieser Wert ignoriert und das "
+"Objekt wird in direktem Kontakt mit der Druckbasis (Raft) gedruckt (kein Abstand)."
 
 msgid "Raft expansion"
 msgstr "Druckbasis Erweiterung"
@@ -17741,14 +17749,20 @@ msgstr ""
 msgid "Top Z distance"
 msgstr "Oberer Z-Abstand"
 
-msgid "The Z gap between the top support interface and object."
-msgstr "Der Z-Abstand zwischen der oberen Stütz-Schnittstelle und dem Objekt"
+msgid "Z gap between the support's top and object."
+msgstr "Z-Abstand zwischen der Oberseite der Stützen und dem Objekt."
 
 msgid "Bottom Z distance"
 msgstr "Unterer Z-Abstand"
 
-msgid "The Z gap between the bottom support interface and object."
-msgstr "Der Z-Abstand zwischen der unteren Stütz-Schnittstelle und dem Objekt"
+msgid ""
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"Z-Abstand zwischen dem Objekt und der Unterseite der Stützen. "
+"Wenn der obere Z-Abstand der Stützen ist 0 und die Unterseite Schnittstellenschichten hat, wird dieser "
+"Wert ignoriert und die Stützen werden in direktem Kontakt mit dem Objekt gedruckt (kein Abstand)."
 
 msgid "Support/raft base"
 msgstr "Stütz-/Basis-Objekt"

localization/i18n/en/OrcaSlicer_en.po

@@ -13403,6 +13403,9 @@ msgstr ""
 msgid "Contour"
 msgstr ""
 
+msgid "Hole"
+msgstr ""
+
 msgid "Contour and hole"
 msgstr ""
 
@@ -14524,10 +14527,13 @@ msgstr ""
 msgid "Raft contact Z distance"
 msgstr ""
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
-"This is the Z gap between an object and a raft. It is ignored for soluble "
-"interfaces."
+"Z gap between raft and object. If Support Top Z Distance is 0, this value "
+"is ignored and the object is printed in direct contact with the raft (no gap)."
 
 msgid "Raft expansion"
 msgstr ""
@@ -15322,14 +15328,20 @@ msgstr ""
 msgid "Top Z distance"
 msgstr ""
 
-msgid "The Z gap between the top support interface and object."
-msgstr "This determines the Z gap between top support interfaces and objects."
+msgid "Z gap between the support's top and object."
+msgstr "Z gap between the support's top and object."
 
 msgid "Bottom Z distance"
 msgstr ""
 
-msgid "The Z gap between the bottom support interface and object."
+msgid ""
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
 msgstr ""
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
 
 msgid "Support/raft base"
 msgstr ""

localization/i18n/es/OrcaSlicer_es.po

@@ -15294,6 +15294,9 @@ msgstr "Solo pintado"
 msgid "Contour"
 msgstr "Contorno"
 
+msgid "Hole"
+msgstr "Orificio"
+
 msgid "Contour and hole"
 msgstr "Contorno y orificio"
 
@@ -16710,10 +16713,14 @@ msgstr "Variante de la impresora"
 msgid "Raft contact Z distance"
 msgstr "Distancia Z de contacto de la balsa (base de impresión)"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
-"Espacio Z entre el objeto y la balsa (base de impresión). Se ignora con una "
-"interfaz soluble."
+"Espacio Z entre el objeto y la balsa (base de impresión). "
+"Si la distancia Z superior del soporte es 0, este valor se ignora y el "
+"objeto se imprime en contacto directo con la balsa (sin separación)."
 
 msgid "Raft expansion"
 msgstr "Expansión de la balsa (base de impresión)"
@@ -17701,14 +17708,20 @@ msgstr "Ignorar pequeños voladizos que posiblemente no requieran soporte."
 msgid "Top Z distance"
 msgstr "Distancia Z superior"
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
 msgstr "La distancia z entre la interfaz de soporte superior y el objeto."
 
 msgid "Bottom Z distance"
 msgstr "Distancia Z inferior"
 
-msgid "The Z gap between the bottom support interface and object."
-msgstr "La distancia z entre la interfaz de apoyo inferior y el objeto."
+msgid ""
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"La distancia z entre la interfaz de apoyo inferior y el objeto. "
+"Si la distancia Z superior del soporte es 0 y la base tiene capas de interfaz, este valor "
+"se ignora y el soporte se imprime en contacto directo con el objeto (sin separación)."
 
 msgid "Support/raft base"
 msgstr "Capa base/balsa"

localization/i18n/fr/OrcaSlicer_fr.po

@@ -15433,6 +15433,9 @@ msgstr "Peint uniquement"
 msgid "Contour"
 msgstr "Contour"
 
+msgid "Hole"
+msgstr "Trou"
+
 msgid "Contour and hole"
 msgstr "Contour et trou"
 
@@ -16869,8 +16872,14 @@ msgstr "Variante de l’imprimante"
 msgid "Raft contact Z distance"
 msgstr "Distance Z de contact du radeau"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
-msgstr "Écart en Z entre l'objet et le radeau. Ignoré pour l'interface soluble"
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
+msgstr ""
+"Écart Z entre le radeau et l'objet. "
+"Si la distance Z supérieure du support est 0, cette valeur est ignorée "
+"et l'objet est imprimé en contact direct avec le radeau (sans écart)."
 
 msgid "Raft expansion"
 msgstr "Agrandissement du radeau"
@@ -17867,14 +17876,20 @@ msgstr ""
 msgid "Top Z distance"
 msgstr "Distance Z supérieure"
 
-msgid "The Z gap between the top support interface and object."
-msgstr "L'écart z entre l'interface de support supérieure et l'objet"
+msgid "Z gap between the support's top and object."
+msgstr "Écart Z entre le haut du support et l'objet."
 
 msgid "Bottom Z distance"
 msgstr "Distance Z inférieure"
 
-msgid "The Z gap between the bottom support interface and object."
-msgstr "L'écart Z entre l'interface du support inférieur et l'objet"
+msgid ""
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"Écart Z entre l'objet et le bas du support. "
+"Si la distance Z supérieure du support est 0 et que le bas a des couches d'interface, cette "
+"valeur est ignorée et le support est imprimé en contact direct avec l'objet (sans écart)."
 
 msgid "Support/raft base"
 msgstr "Support/base du radeau"

localization/i18n/hu/OrcaSlicer_hu.po

@@ -15122,6 +15122,9 @@ msgstr "Csak festett"
 msgid "Contour"
 msgstr "Kontúr"
 
+msgid "Hole"
+msgstr "Lyuk"
+
 msgid "Contour and hole"
 msgstr "Kontúr és lyuk"
 
@@ -16517,10 +16520,14 @@ msgstr "Nyomtató változat"
 msgid "Raft contact Z distance"
 msgstr "Tutaj érintkezési Z-távolság"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
-"This is the Z gap between an object and a raft. It is ignored for soluble "
-"interfaces."
+"Z rés a tutaj és a tárgy között. "
+"Ha a támasz felső Z-távolsága 0, ez az érték figyelmen kívül lesz "
+"hagyva és a tárgy közvetlenül a tutajon kerül nyomtatásra (rés nélkül)."
 
 msgid "Raft expansion"
 msgstr "Tutaj kibővítése"
@@ -17507,19 +17514,24 @@ msgstr ""
 msgid "Top Z distance"
 msgstr "Z távolság"
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
 msgstr ""
-"Meghatározza a Z távolságot a felső támasz érintkező rétege és az objektum "
-"között."
+"Z rés a támasz teteje és a tárgy között."
 
 msgid "Bottom Z distance"
 msgstr "Alsó Z távolság"
 
-msgid "The Z gap between the bottom support interface and object."
-msgstr "A Z távolság az alsó támasz érintkező rétege és az objektum között."
+msgid ""
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"Z rés a tárgy és a támasz alja között. "
+"Ha a támasz felső Z-távolsága 0 és az alján vannak interfész rétegek, ez az érték "
+"figyelmen kívül lesz hagyva, és a támasz közvetlenül a tárgyhoz lesz nyomtatva (rés nélkül)."
 
 msgid "Support/raft base"
-msgstr "Támaszték/tutaj alap"
+msgstr "Támasz/tutaj alap"
 
 msgid ""
 "Filament to print support base and raft. \"Default\" means no specific "
@@ -17555,7 +17567,7 @@ msgstr ""
 "letiltva."
 
 msgid "Support/raft interface"
-msgstr "Támaszték/tutaj csatlakozófelület"
+msgstr "Támasz/tutaj interfész"
 
 msgid ""
 "Filament to print support interface. \"Default\" means no specific filament "

localization/i18n/it/OrcaSlicer_it.po

@@ -15319,6 +15319,9 @@ msgstr "Solo verniciato"
 msgid "Contour"
 msgstr "Contorno"
 
+msgid "Hole"
+msgstr "Foro"
+
 msgid "Contour and hole"
 msgstr "Contorno e foro"
 
@@ -16745,10 +16748,14 @@ msgstr "Variante stampante"
 msgid "Raft contact Z distance"
 msgstr "Distanza Z di contatto zattera"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
-"Indica lo spazio Z tra oggetto e zattera. Viene ignorato per le interfacce "
-"di supporto solubili."
+"Spazio Z tra zattera e oggetto. "
+"Se la distanza Z superiore del supporto è 0, questo valore viene ignorato e "
+"l'oggetto viene stampato a contatto diretto con la zattera (senza spazio)."
 
 msgid "Raft expansion"
 msgstr "Espansione della zattera"
@@ -17742,16 +17749,21 @@ msgstr "Ignora i piccoli sbalzi che potrebbero non richiedere supporto."
 msgid "Top Z distance"
 msgstr "Distanza Z superiore"
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
 msgstr ""
-"Determina lo spazio Z tra l'interfaccia di supporto superiore e l'oggetto."
+"Spazio Z tra la parte superiore del supporto e l'oggetto."
 
 msgid "Bottom Z distance"
 msgstr "Distanza Z inferiore"
 
-msgid "The Z gap between the bottom support interface and object."
+msgid ""
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
 msgstr ""
-"Determina lo spazio Z tra l'interfaccia di supporto inferiore e l'oggetto."
+"Spazio Z tra l'oggetto e la base del supporto. "
+"Se la distanza Z superiore del supporto è 0 e la base ha strati di interfaccia, questo valore "
+"viene ignorato e il supporto viene stampato a contatto diretto con l'oggetto (senza spazio)."
 
 msgid "Support/raft base"
 msgstr "Base supporto/zattera"

localization/i18n/ja/OrcaSlicer_ja.po

@@ -14093,6 +14093,9 @@ msgstr "塗装のみ"
 msgid "Contour"
 msgstr "輪郭"
 
+msgid "Hole"
+msgstr "穴"
+
 msgid "Contour and hole"
 msgstr "輪郭と穴"
 
@@ -15231,10 +15234,14 @@ msgstr "プリンターバリエーション"
 msgid "Raft contact Z distance"
 msgstr "ラフト接触面Z間隔"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
-"ラフトとオブジェクトのZ方向の間隔。可溶性材料を使用する場合この設定が無効で"
-"す。"
+"ラフトとオブジェクトの間のZ隙間。"
+"サポート上面Z距離が0の場合、この値は無視され、"
+"オブジェクトはラフトに直接接触して印刷されます（隙間なし）。"
 
 msgid "Raft expansion"
 msgstr "ラフト拡張"
@@ -16043,14 +16050,20 @@ msgstr ""
 msgid "Top Z distance"
 msgstr "トップ面とのZ間隔"
 
-msgid "The Z gap between the top support interface and object."
-msgstr "サポート接触面とオブジェクトのZ方向の間隔"
+msgid "Z gap between the support's top and object."
+msgstr "サポート上面とオブジェクトの間のZ隙間。"
 
 msgid "Bottom Z distance"
 msgstr "底面とのZ間隔"
 
-msgid "The Z gap between the bottom support interface and object."
-msgstr "サポート底面とオブジェクトのZ方向間隔"
+msgid ""
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"オブジェクトとサポート下面の間のZ隙間。"
+"サポート上面Z距離が0で、下面にインターフェース層がある場合、"
+"この値は無視され、サポートはオブジェクトに直接接触して印刷されます（隙間なし）。"
 
 msgid "Support/raft base"
 msgstr ""

localization/i18n/ko/OrcaSlicer_ko.po

@@ -14240,6 +14240,9 @@ msgstr "도색만"
 msgid "Contour"
 msgstr "윤곽"
 
+msgid "Hole"
+msgstr "구멍"
+
 msgid "Contour and hole"
 msgstr "윤곽 및 구멍"
 
@@ -15506,8 +15509,14 @@ msgstr "프린터 변형"
 msgid "Raft contact Z distance"
 msgstr "라프트 접점 Z 거리"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
-msgstr "객체와 라프트 사이의 Z 거리. 가용성 재료의 접점은 무시됨"
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
+msgstr ""
+"래프트와 객체 사이의 Z 간격. "
+"서포트 상단 Z 거리가 0이면 이 값은 무시되고 "
+"객체는 래프트에 직접 접촉하여 출력됩니다(간격 없음)."
 
 msgid "Raft expansion"
 msgstr "라프트 확장"
@@ -16423,14 +16432,20 @@ msgstr ""
 msgid "Top Z distance"
 msgstr "상단 Z 거리"
 
-msgid "The Z gap between the top support interface and object."
-msgstr "서포트 상단과 객체 접점의 간격"
+msgid "Z gap between the support's top and object."
+msgstr "서포트 상단과 객체 사이의 Z 간격."
 
 msgid "Bottom Z distance"
 msgstr "하단 Z 거리"
 
-msgid "The Z gap between the bottom support interface and object."
-msgstr "서포트 하단과 객체 접점의 간격"
+msgid ""
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"객체와 서포트 하단 사이의 Z 간격. "
+"서포트 상단 Z 거리가 0이고 하단에 인터페이스 레이어가 있으"
+"면 이 값은 무시되고 서포트가 객체에 직접 접촉하여 출력됩니다(간격 없음)."
 
 msgid "Support/raft base"
 msgstr "서포트/라프트 기본"

localization/i18n/lt/OrcaSlicer_lt.po

@@ -15043,6 +15043,9 @@ msgstr "Tik dažytas"
 msgid "Contour"
 msgstr "Kontūras"
 
+msgid "Hole"
+msgstr "Skylė"
+
 msgid "Contour and hole"
 msgstr "Kontūras ir skylė"
 
@@ -16432,10 +16435,14 @@ msgstr "Spausdintuvo variantas"
 msgid "Raft contact Z distance"
 msgstr "Platformos kontakto Z atstumas"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
-"Z tarpas tarp objekto ir platformos. Į jį neatsižvelgiama tirpių sąsajų "
-"atveju."
+"Z tarpas tarp platformos ir objekto. "
+"Jei viršutinis atramos Z atstumas yra 0, ši reikšmė ignoruojama ir "
+"objektas spausdinamas tiesiogiai kontaktuojant su platforma (be tarpo)."
 
 msgid "Raft expansion"
 msgstr "Platformos išplėtimas"
@@ -17405,14 +17412,20 @@ msgstr "Ignore small overhangs that possibly don't require support."
 msgid "Top Z distance"
 msgstr "Viršutinis Z atstumas"
 
-msgid "The Z gap between the top support interface and object."
-msgstr "Taip nustatomas Z tarpas tarp viršutinių atramų sąsajų ir objektų."
+msgid "Z gap between the support's top and object."
+msgstr "Z tarpas tarp atramos viršaus ir objekto."
 
 msgid "Bottom Z distance"
 msgstr "Apatinis Z atstumas"
 
-msgid "The Z gap between the bottom support interface and object."
-msgstr "Z tarpas tarp apatinės atramos sąsajos ir objekto."
+msgid ""
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"Z tarpas tarp objekto ir atramos apačios. "
+"Jei viršutinis atramos Z atstumas yra 0 ir apačioje yra sąsajos sluoksniai, ši reikšmė "
+"ignoruojama ir atrama spausdinama tiesiogiai kontaktuojant su objektu (be tarpo)."
 
 msgid "Support/raft base"
 msgstr "Atraminis ir (arba) platformos pagrindas"

localization/i18n/nl/OrcaSlicer_nl.po

@@ -15043,6 +15043,9 @@ msgstr "Alleen geverfd"
 msgid "Contour"
 msgstr "Contour"
 
+msgid "Hole"
+msgstr "Gat"
+
 msgid "Contour and hole"
 msgstr "Contour en gat"
 
@@ -16426,10 +16429,14 @@ msgstr "Printervariant"
 msgid "Raft contact Z distance"
 msgstr "Vlot (raft) contact Z afstand:"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
-"Dit is de Z-afstand tussen een object en een raft. Het wordt genegeerd voor "
-"oplosbare materialen."
+"Z-gap tussen het vlot en het object. "
+"Als de bovenste Z-afstand van de ondersteuning 0 is, wordt deze waarde "
+"genegeerd en wordt het object direct in contact met het vlot geprint (geen gap)."
 
 msgid "Raft expansion"
 msgstr "Vlot (raft) expansie"
@@ -17404,15 +17411,21 @@ msgstr "Ignore small overhangs that possibly don't require support."
 msgid "Top Z distance"
 msgstr "Top Z afstand"
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
 msgstr ""
-"Dit bepaald de Z-afstand tussen de bovenste support interfaces en het object."
+"Z-gap tussen de bovenkant van de ondersteuning en het object."
 
 msgid "Bottom Z distance"
 msgstr "Onderste Z-afstand"
 
-msgid "The Z gap between the bottom support interface and object."
-msgstr "De z-opening tussen de onderste ondersteuningsinterface en het object"
+msgid ""
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"Z-gap tussen het object en de onderkant van de ondersteuning. "
+"Als de bovenste Z-afstand van de ondersteuning 0 is en de onderkant interfacerlagen heeft, wordt "
+"deze waarde genegeerd en wordt de ondersteuning direct in contact met het object geprint (geen gap)."
 
 msgid "Support/raft base"
 msgstr "Support/raft base"

localization/i18n/pl/OrcaSlicer_pl.po

@@ -14539,6 +14539,9 @@ msgstr "Tylko malowane"
 msgid "Contour"
 msgstr "Kontur"
 
+msgid "Hole"
+msgstr "Otwory"
+
 msgid "Contour and hole"
 msgstr "Kontur i otwory"
 
@@ -15873,10 +15876,14 @@ msgstr "Wariant drukarki"
 msgid "Raft contact Z distance"
 msgstr "Odległość Z kontaktu z tratwą"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
-"Dystans między modelem, a raftem, mierzony w poziomie. Ignorowany dla "
-"rozpuszczalnych warstw łączących"
+"Odstęp Z między tratwą a obiektem. "
+"Jeśli górny odstęp Z podpór wynosi 0, ta wartość jest ignorowana i "
+"obiekt jest drukowany w bezpośrednim kontakcie z tratwą (bez odstępu)."
 
 msgid "Raft expansion"
 msgstr "Rozszerzenie tratwy"
@@ -16843,14 +16850,20 @@ msgstr ""
 msgid "Top Z distance"
 msgstr "Odstęp góry w osi Z"
 
-msgid "The Z gap between the top support interface and object."
-msgstr "Odstęp osi Z między górną warstwą łączącą podporę z obiektem"
+msgid "Z gap between the support's top and object."
+msgstr "Odstęp Z między górą podpór a obiektem."
 
 msgid "Bottom Z distance"
 msgstr "Odstęp spodu w osi Z"
 
-msgid "The Z gap between the bottom support interface and object."
-msgstr "Odległość w osi Z między dolną warstwą łączącyą a obiektem"
+msgid ""
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"Odstęp Z między obiektem a dołem podpór. "
+"Jeśli górny odstęp Z podpór wynosi 0 i dół ma warstwy interfejsu, ta wartość jest "
+"ignorowana, a podpory są drukowane w bezpośrednim kontakcie z obiektem (bez odstępu)."
 
 msgid "Support/raft base"
 msgstr "Podstawa podpory/tratwy"

localization/i18n/pt_BR/OrcaSlicer_pt_BR.po

@@ -15186,6 +15186,9 @@ msgstr "Somente pintado"
 msgid "Contour"
 msgstr "Contorno"
 
+msgid "Hole"
+msgstr "Furo"
+
 msgid "Contour and hole"
 msgstr "Contorno e furo"
 
@@ -16593,8 +16596,14 @@ msgstr "Variante da impressora"
 msgid "Raft contact Z distance"
 msgstr "Distância Z de contato da jangada"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
-msgstr "Vão Z entre o objeto e a jangada. Ignorado para interface solúvel."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
+msgstr ""
+"Espaço Z entre a balsa e o objeto. "
+"Se a Distância Z Superior do Suporte for 0, este valor é ignorado "
+"e o objeto é impresso em contato direto com a balsa (sem espaço)."
 
 msgid "Raft expansion"
 msgstr "Expansão da jangada"
@@ -17572,14 +17581,20 @@ msgstr "Ignorar pequenas saliências que possivelmente não requerem suporte."
 msgid "Top Z distance"
 msgstr "Distância Z superior"
 
-msgid "The Z gap between the top support interface and object."
-msgstr "O vão Z entre a interface superior de suporte e o objeto."
+msgid "Z gap between the support's top and object."
+msgstr "Espaço Z entre o topo do suporte e o objeto."
 
 msgid "Bottom Z distance"
 msgstr "Distância Z inferior"
 
-msgid "The Z gap between the bottom support interface and object."
-msgstr "O vão Z entre a interface inferior de suporte e o objeto."
+msgid ""
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"Espaço Z entre o objeto e a base do suporte. "
+"Se a Distância Z Superior do Suporte for 0 e a base tiver camadas de interface, este "
+"valor é ignorado e o suporte é impresso em contato direto com o objeto (sem espaço)."
 
 msgid "Support/raft base"
 msgstr "Base de suporte/jangada"

localization/i18n/ru/OrcaSlicer_ru.po

@@ -15501,6 +15501,9 @@ msgstr "Вручную"
 msgid "Contour"
 msgstr "Контур"
 
+msgid "Hole"
+msgstr "Отверстия"
+
 msgid "Contour and hole"
 msgstr "Контур и отверстия"
 
@@ -16954,10 +16957,14 @@ msgstr "Модификация принтера"
 msgid "Raft contact Z distance"
 msgstr "Зазор под моделью"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
-"Вертикальное расстояние между подложкой и моделью. Значение игнорируется при "
-"выборе растворимого материала."
+"Вертикальное расстояние между подложкой и моделью. "
+"Если зазор поддержки сверху равен 0, это значение игнорируется, "
+"и модель печатается в прямом контакте с подложкой (без зазора)."
 
 msgid "Raft expansion"
 msgstr "Расширение подложки"
@@ -18047,16 +18054,20 @@ msgstr ""
 msgid "Top Z distance"
 msgstr "Зазор поддержки сверху"
 
-msgid "The Z gap between the top support interface and object."
-msgstr ""
-"Вертикальное расстояние между связующим слоем поддержки сверху и моделью."
+msgid "Z gap between the support's top and object."
+msgstr "Вертикальное расстояние между связующим слоем поддержки сверху и моделью."
 
 msgid "Bottom Z distance"
 msgstr "Зазор поддержки снизу"
 
-msgid "The Z gap between the bottom support interface and object."
+msgid ""
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
 msgstr ""
-"Вертикальное расстояние между связующим слоем поддержки снизу и моделью."
+"Вертикальное расстояние между связующим слоем поддержки снизу и моделью. "
+"Если зазор поддержки сверху равен 0 и снизу есть интерфейсные слои, это значение "
+"игнорируется, и поддержка печатается в прямом контакте с моделью (без зазора)."
 
 msgid "Support/raft base"
 msgstr "Поддержка/подложка"

localization/i18n/sv/OrcaSlicer_sv.po

@@ -14883,6 +14883,9 @@ msgstr "Endast målad"
 msgid "Contour"
 msgstr "Kontur"
 
+msgid "Hole"
+msgstr "Hål"
+
 msgid "Contour and hole"
 msgstr "Kontur och hål"
 
@@ -16255,10 +16258,14 @@ msgstr "Printer variant"
 msgid "Raft contact Z distance"
 msgstr "Raft kontakt Z avstånd"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
-"Där finns Z mellanrum mellan ett objekt och en raft. Detta ignoreras för "
-"lösliga gränssnitt"
+"Z-gapet mellan raften och objektet. "
+"Om Topp Z-distans är 0 ignoreras detta värde och objektet "
+"skrivs ut i direkt kontakt med raften (utan mellanrum)."
 
 msgid "Raft expansion"
 msgstr "Raft expansion"
@@ -17219,15 +17226,20 @@ msgstr "Ignore small overhangs that possibly don't require support."
 msgid "Top Z distance"
 msgstr "Topp Z-distans"
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
 msgstr ""
-"Detta bestämmer Z-avståndet mellan det övre support gränssnittet och objektet"
+"Z-gapet mellan supportens topp och objektet."
 
 msgid "Bottom Z distance"
 msgstr "Nedre Z-avstånd"
 
-msgid "The Z gap between the bottom support interface and object."
-msgstr "Z-gapet mellan botten support och objektets anläggningsyta"
+msgid ""
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr "Z-gapet mellan objektet och supportens botten. "
+"Om Topp Z-distans är 0 och botten har gränssnittslager ignoreras detta "
+"värde och supporten skrivs ut i direkt kontakt med objektet (utan mellanrum)."
 
 msgid "Support/raft base"
 msgstr "Support/raft bas"

localization/i18n/tr/OrcaSlicer_tr.po

@@ -13339,6 +13339,9 @@ msgstr "Sadece boyalı"
 msgid "Contour"
 msgstr "Kontur"
 
+msgid "Hole"
+msgstr "Delik"
+
 msgid "Contour and hole"
 msgstr "Kontur ve delik"
 
@@ -14487,8 +14490,14 @@ msgstr "Yazıcı çeşidi"
 msgid "Raft contact Z distance"
 msgstr "Raft kontak Z mesafesi"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
-msgstr "Nesne ve raft arasındaki Z boşluğu. Çözünür arayüz için göz ardı edildi."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
+msgstr ""
+"Sal ile nesne arasındaki Z boşluğu. "
+"Destek üst Z mesafesi 0 ise bu değer yok sayılır ve nesne "
+"sal ile doğrudan temas halinde basılır (boşluk yok)."
 
 msgid "Raft expansion"
 msgstr "Raft genişletme"
@@ -15271,14 +15280,20 @@ msgstr "Muhtemelen destek gerektirmeyen küçük çıkıntıları göz ardı edi
 msgid "Top Z distance"
 msgstr "Üst z mesafesi"
 
-msgid "The Z gap between the top support interface and object."
-msgstr "Üst destek arayüzü ile nesne arasındaki z boşluğu."
+msgid "Z gap between the support's top and object."
+msgstr "Desteğin üstü ile nesne arasındaki Z boşluğu."
 
 msgid "Bottom Z distance"
 msgstr "Alt z mesafesi"
 
-msgid "The Z gap between the bottom support interface and object."
-msgstr "Alt destek arayüzü ile nesne arasındaki z boşluğu."
+msgid ""
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"Nesne ile destek altı arasındaki Z boşluğu. "
+"Destek üst Z mesafesi 0 ise ve altta arayüz katmanları varsa bu değer yok "
+"sayılır ve destek nesneyle doğrudan temas halinde basılır (boşluk yok)."
 
 msgid "Support/raft base"
 msgstr "Destek/raft tabanı"

localization/i18n/uk/OrcaSlicer_uk.po

@@ -14536,6 +14536,9 @@ msgstr "Тільки пофарбовані"
 msgid "Contour"
 msgstr "Контур"
 
+msgid "Hole"
+msgstr "Отвір"
+
 msgid "Contour and hole"
 msgstr "Контур та отвір"
 
@@ -15865,9 +15868,14 @@ msgstr "Варіант принтера"
 msgid "Raft contact Z distance"
 msgstr "Відстань Z контакту підкладки"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
-"Зазор Z між об'єктом та підкладкою. Ігнорується для розчинного інтерфейсу"
+"Z-зазор між підкладкою та моделлю. "
+"Якщо верхній Z-зазор підтримки дорівнює 0, це значення ігнорується, "
+"і модель друкується в прямому контакті з підкладкою (без зазору)."
 
 msgid "Raft expansion"
 msgstr "Розширення підкладки"
@@ -16820,14 +16828,20 @@ msgstr ""
 msgid "Top Z distance"
 msgstr "Верхня відстань Z"
 
-msgid "The Z gap between the top support interface and object."
-msgstr "Зазор осі z між верхом підтримки та об'єктом"
+msgid "Z gap between the support's top and object."
+msgstr "Z-зазор між верхом підтримки та моделлю."
 
 msgid "Bottom Z distance"
 msgstr "Нижня відстань Z"
 
-msgid "The Z gap between the bottom support interface and object."
-msgstr "Зазор осі z між низом підтримки та об'єктом"
+msgid ""
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"Z-зазор між моделлю та нижньою частиною підтримки. "
+"Якщо верхній Z-зазор підтримки дорівнює 0 і знизу є інтерфейсні шари, це значення "
+"ігнорується, і підтримка друкується в прямому контакті з моделлю (без зазору)."
 
 msgid "Support/raft base"
 msgstr "База підтримки/підкладки"

localization/i18n/vi/OrcaSlicer_vi.po

@@ -14730,6 +14730,9 @@ msgstr "Chỉ được sơn"
 msgid "Contour"
 msgstr "Đường viền"
 
+msgid "Hole"
+msgstr "Lỗ"
+
 msgid "Contour and hole"
 msgstr "Đường viền và lỗ"
 
@@ -16079,8 +16082,14 @@ msgstr "Biến thể máy in"
 msgid "Raft contact Z distance"
 msgstr "Khoảng cách Z tiếp xúc raft"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
-msgstr "Khe Z giữa đối tượng và raft. Bị bỏ qua cho giao diện hòa tan."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
+msgstr ""
+"Khoảng cách Z giữa bè và vật thể. "
+"Nếu khoảng cách Z trên của hỗ trợ bằng 0, giá trị này sẽ bị bỏ qua "
+"và vật thể được in tiếp xúc trực tiếp với bè (không có khe hở)."
 
 msgid "Raft expansion"
 msgstr "Mở rộng raft"
@@ -17021,14 +17030,20 @@ msgstr "Ignore small overhangs that possibly don't require support."
 msgid "Top Z distance"
 msgstr "Khoảng cách Z trên"
 
-msgid "The Z gap between the top support interface and object."
-msgstr "Khe Z giữa giao diện support trên và đối tượng."
+msgid "Z gap between the support's top and object."
+msgstr "Khoảng cách Z giữa mặt trên của hỗ trợ và vật thể."
 
 msgid "Bottom Z distance"
 msgstr "Khoảng cách Z dưới"
 
-msgid "The Z gap between the bottom support interface and object."
-msgstr "Khe Z giữa giao diện support dưới và đối tượng."
+msgid ""
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"Khoảng cách Z giữa vật thể và phần đáy của hỗ trợ. "
+"Nếu khoảng cách Z trên của hỗ trợ bằng 0 và phần đáy có các lớp giao diện, giá trị "
+"này sẽ bị bỏ qua và hỗ trợ được in tiếp xúc trực tiếp với vật thể (không có khe hở)."
 
 msgid "Support/raft base"
 msgstr "Đế support/raft"
@@ -22872,3 +22887,4 @@ msgstr ""
 #, c-format, boost-format
 #~ msgid "*Printing %s material with %s may cause nozzle damage"
 #~ msgstr "*In vật liệu %s với %s có thể gây hư hỏng đầu phun"
+

localization/i18n/zh_CN/OrcaSlicer_zh_CN.po

@@ -13894,6 +13894,9 @@ msgstr "仅涂漆"
 msgid "Contour"
 msgstr "轮廓"
 
+msgid "Hole"
+msgstr "孔"
+
 msgid "Contour and hole"
 msgstr "轮廓和孔"
 
@@ -15128,8 +15131,11 @@ msgstr "打印机变种"
 msgid "Raft contact Z distance"
 msgstr "筏层Z间距"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
-msgstr "模型和筏层之间的Z间隙"
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
+msgstr "筏层与模型之间的Z间隙。如果支撑顶部Z距离为0，则忽略该值，模型与筏层直接接触打印（无间隙）。"
 
 msgid "Raft expansion"
 msgstr "筏层扩展"
@@ -15988,14 +15994,19 @@ msgstr "将几乎不需要支撑的微小悬垂忽略掉。"
 msgid "Top Z distance"
 msgstr "顶部Z距离"
 
-msgid "The Z gap between the top support interface and object."
-msgstr "支撑顶部和模型之间的z间隙"
+msgid "Z gap between the support's top and object."
+msgstr "支撑顶部与模型之间的Z间隙。"
 
 msgid "Bottom Z distance"
 msgstr "底部Z距离"
 
-msgid "The Z gap between the bottom support interface and object."
-msgstr "支撑生成于模型表面时，支撑面底部和模型之间的z间隙"
+msgid ""
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"模型与支撑底部之间的Z间隙。"
+"如果支撑顶部Z距离为0且底部有界面层，则忽略该值，支撑与模型直接接触打印（无间隙）。"
 
 msgid "Support/raft base"
 msgstr "支撑/筏层主体"

localization/i18n/zh_TW/OrcaSlicer_zh_TW.po

@@ -4152,7 +4152,7 @@ msgstr ""
 "重設為 0。seam_slope_start_height 必須小於 layer_height。\n"
 "重設為 0。"
 
-#, no-c-format, no-boost-format
+#, fuzzy, c-format, boost-format
 msgid ""
 "Lock depth should smaller than skin depth.\n"
 "Reset to 50% of skin depth."
@@ -14006,6 +14006,9 @@ msgstr "僅塗漆"
 msgid "Contour"
 msgstr "輪廓"
 
+msgid "Hole"
+msgstr "孔洞"
+
 msgid "Contour and hole"
 msgstr "輪廓和孔"
 
@@ -15260,8 +15263,11 @@ msgstr "列印設備型號"
 msgid "Raft contact Z distance"
 msgstr "筏層 Z 間距"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
-msgstr "模型和筏層之間的Z間隙"
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
+msgstr "筏層與模型之間的Z間隙。若支撐頂部Z距離為0，則忽略此值，模型與筏層直接接觸列印（無間隙）。"
 
 msgid "Raft expansion"
 msgstr "筏層擴展"
@@ -16124,14 +16130,19 @@ msgstr "將幾乎不需要支撐的微小懸空忽略掉。"
 msgid "Top Z distance"
 msgstr "頂部 Z 間距"
 
-msgid "The Z gap between the top support interface and object."
-msgstr "支撐頂部和模型之間的 Z 間隙"
+msgid "Z gap between the support's top and object."
+msgstr "支撐頂部與模型之間的Z間隙。"
 
 msgid "Bottom Z distance"
 msgstr "底部 Z 間距"
 
-msgid "The Z gap between the bottom support interface and object."
-msgstr "支撐產生於模型表面時，支撐面底部和模型之間的 Z 間隙"
+msgid ""
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"模型與支撐底部之間的Z間隙。"
+"若支撐頂部Z距離為0且底部有介面層，則忽略此值，支撐與模型直接接觸列印（無間隙）。"
 
 msgid "Support/raft base"
 msgstr "支撐/筏層主體"

resources/printers/N6.json

@@ -0,0 +1,112 @@
+{
+	"00.00.00.00": {
+		"display_name": "Bambu Lab X2D",
+		"print": {
+			"ipcam": {
+				"resolution_supported": [ "1080p" ],
+				"virtual_camera": "enabled",
+				"liveview": {
+					"remote": "tutk"
+				},
+				"file": {
+					"local": "local",
+					"remote": "tutk",
+					"model_download": "enabled"
+				}
+			},
+			"nozzle_temp_range": [ 0, 300 ],
+			"nozzle_replace_wiki": {
+				"zh": "https://wiki.bambulab.com/zh/h2/maintenance/replace-hotend",
+				"en": "https://wiki.bambulab.com/en/h2/maintenance/replace-hotend"
+			},
+			"bed_temp_range": [ 0, 120 ],
+			"support_motor_noise_cali": false,
+			"support_tunnel_mqtt": true,
+			"support_mqtt_alive": true,
+			"support_command_ams_switch": true,
+			"support_ssl_for_mqtt": true,
+			"support_cloud_print_only": false,
+			"support_1080dpi": true,
+			"support_prompt_sound": false,
+			"support_ams_humidity": true,
+			"support_auto_recovery_step_loss": true,
+			"support_bed_leveling": 2,
+			"support_update_remain": true,
+			"support_timelapse": true,
+			"support_filament_backup": true,
+			"support_chamber_fan": true,
+			"support_aux_fan": true,
+			"support_send_to_sd": true,
+			"support_print_all": true,
+			"support_print_without_sd": true,
+			"support_flow_calibration": true,
+			"support_auto_flow_calibration": true,
+			"support_build_plate_marker_detect": true,
+			"support_build_plate_marker_detect_type": 2,
+			"support_lidar_calibration": false,
+			"support_nozzle_offset_calibration": true,
+			"support_high_tempbed_calibration": true,
+			"support_clump_position_calibration": true,
+			"support_ai_monitoring": true,
+			"support_first_layer_inspect": false,
+			"support_save_remote_print_file_to_storage": true,
+			"support_chamber": true,
+			"support_chamber_temp_edit": true,
+			"support_chamber_temp_edit_range": [0, 65],
+			"support_chamber_temp_switch_heating": 40,
+			"support_extrusion_cali": false,
+			"support_user_preset": false,
+			"support_ams_ext_mix_print": true,
+			"support_ams_filament_change_abort": true
+		},
+		"fan" : {
+			"0" :
+			{
+				"mode_name": "Strong Cooling",
+				"2": "Left(Aux)",
+				"10": {
+					"-1": "Right(Aux)",
+					"0": "Right(Aux)",
+					"1": "Right(Filter)"
+				}
+			},
+			"1" :
+			{
+				"mode_name": "Heating",
+				"2": "Left(Heating)",
+				"10": "Right(Filter)"
+			},
+			"special_cooling_text" : "Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the chamber air."
+		},
+		"model_id": "N6",
+		"subseries": ["N6-V2"],
+		"auto_pa_cali_thumbnail_image": "fd_calibration_auto_n6",
+		"support_wrapping_detection": false,
+		"compatible_machine": [],
+		"printer_type": "N6",
+		"printer_thumbnail_image": "printer_thumbnail_N6",
+		"printer_connect_help_image": "input_access_code_x1",
+		"printer_use_ams_image": "ams_icon",
+		"printer_ext_image": ["ext_image_default"],
+		"use_ams_type": "generic",
+		"printer_arch": "core_xy",
+		"printer_series": "series_x1",
+		"has_cali_line": true,
+		"printer_is_enclosed": true,
+		"enable_set_nozzle_info": false,
+		"support_safety_options": true,
+		"filament_load_image": ["filament_load_n6_series_ext0","filament_load_n6_series_ext1"],
+		"tool_head_display_names": {
+			"0": {
+				"extruder": ["Auxiliary Extruder", "Auxiliary extruder", "auxiliary extruder"],
+				"nozzle":   ["Auxiliary Nozzle",   "Auxiliary nozzle",   "auxiliary nozzle"],
+				"hotend":   ["Auxiliary Hotend",   "Auxiliary hotend",   "auxiliary hotend"]
+			},
+			"1": {
+				"extruder": ["Main Extruder", "Main extruder", "main extruder"],
+				"nozzle":   ["Main Nozzle",   "Main nozzle",   "main nozzle"],
+				"hotend":   ["Main Hotend",   "Main hotend",   "main hotend"]
+			}
+		}
+	}
+}

resources/printers/filaments_blacklist.json

@@ -14,6 +14,24 @@
 			"slot": "ams",
 			"description": "AMS does not support 'Bambu Lab PET-CF'."
 		},
+		{
+			"type": "TPU",
+			"action": "warning",
+			"model_id": [
+				"N6"
+			],
+			"description": "How to feed TPU filament on X2D.",
+			"wiki": "https://e.bambulab.com/t?c=PAxXqQu2zBgvN3ea"
+		},
+		{
+			"type": "TPU-AMS",
+			"action": "warning",
+			"model_id": [
+				"N6"
+			],
+			"description": "How to feed TPU filament on X2D.",
+			"wiki": "https://e.bambulab.com/t?c=PAxXqQu2zBgvN3ea"
+		},
 		{
 			"type": "TPU",
 			"action": "warning",

resources/profiles/Anycubic.json

@@ -44,6 +44,10 @@
 			"name": "Anycubic Kobra 3",
 			"sub_path": "machine/Anycubic Kobra 3.json"
 		},
+		{
+			"name": "Anycubic Kobra 3 Max",
+			"sub_path": "machine/Anycubic Kobra 3 Max.json"
+		},
 		{
 			"name": "Anycubic Kobra Max",
 			"sub_path": "machine/Anycubic Kobra Max.json"
@@ -78,6 +82,70 @@
 			"name": "fdm_process_common",
 			"sub_path": "process/fdm_process_common.json"
 		},
+		{
+			"name": "0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
+			"sub_path": "process/0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
+			"sub_path": "process/0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "0.16mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
+			"sub_path": "process/0.16mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "0.18mm Standard @Anycubic Kobra 3 Max 0.6 nozzle",
+			"sub_path": "process/0.18mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "0.20mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
+			"sub_path": "process/0.20mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
+			"sub_path": "process/0.20mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json"
+		},
+		{
+			"name": "0.24mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
+			"sub_path": "process/0.24mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Standard @Anycubic Kobra 3 Max 0.6 nozzle",
+			"sub_path": "process/0.24mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
+			"sub_path": "process/0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json"
+		},
+		{
+			"name": "0.28mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
+			"sub_path": "process/0.28mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle",
+			"sub_path": "process/0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "0.32mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
+			"sub_path": "process/0.32mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json"
+		},
+		{
+			"name": "0.36mm Standard @Anycubic Kobra 3 Max 0.6 nozzle",
+			"sub_path": "process/0.36mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
+			"sub_path": "process/0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json"
+		},
+		{
+			"name": "0.42mm Standard @Anycubic Kobra 3 Max 0.6 nozzle",
+			"sub_path": "process/0.42mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "0.48mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
+			"sub_path": "process/0.48mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json"
+		},
 		{
 			"name": "0.08mm HighDetail @Anycubic Kobra 3 0.4 nozzle",
 			"sub_path": "process/0.08mm HighDetail @Anycubic Kobra 3 0.4 nozzle.json"
@@ -396,6 +464,90 @@
 			"name": "Anycubic PETG @Anycubic Kobra 3 0.4 nozzle",
 			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PETG @Anycubic Kobra 3 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PETG @Anycubic Kobra 3 Max 0.6 nozzle",
+			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle",
+			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA @Anycubic Kobra 3 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA @Anycubic Kobra 3 Max 0.6 nozzle",
+			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle",
+			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA+ @Anycubic Kobra 3 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA+ @Anycubic Kobra 3 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic ABS @Anycubic Kobra 3 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic ABS @Anycubic Kobra 3 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic ABS @Anycubic Kobra 3 Max 0.6 nozzle",
+			"sub_path": "filament/Anycubic ABS @Anycubic Kobra 3 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle",
+			"sub_path": "filament/Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle.json"
+		},
+		{
+			"name": "Anycubic ASA @Anycubic Kobra 3 Max 0.6 nozzle",
+			"sub_path": "filament/Anycubic ASA @Anycubic Kobra 3 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle",
+			"sub_path": "filament/Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle.json"
+		},
+		{
+			"name": "Anycubic PEBA 95A @Anycubic Kobra 3 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic PEBA 95A @Anycubic Kobra 3 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic TPU @Anycubic Kobra 3 Max 0.4 nozzle",
+			"sub_path": "filament/Anycubic TPU @Anycubic Kobra 3 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic TPU @Anycubic Kobra 3 Max 0.6 nozzle",
+			"sub_path": "filament/Anycubic TPU @Anycubic Kobra 3 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle",
+			"sub_path": "filament/Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic PETG Basic @Anycubic Kobra 3 Max 0.4 nozzle",
+			"sub_path": "filament/Generic PETG Basic @Anycubic Kobra 3 Max 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle.json"
@@ -518,6 +670,18 @@
 			"name": "Anycubic Kobra 3 0.8 nozzle",
 			"sub_path": "machine/Anycubic Kobra 3 0.8 nozzle.json"
 		},
+		{
+			"name": "Anycubic Kobra 3 Max 0.4 nozzle",
+			"sub_path": "machine/Anycubic Kobra 3 Max 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic Kobra 3 Max 0.6 nozzle",
+			"sub_path": "machine/Anycubic Kobra 3 Max 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic Kobra 3 Max 0.8 nozzle",
+			"sub_path": "machine/Anycubic Kobra 3 Max 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic Kobra Max 0.4 nozzle",
 			"sub_path": "machine/Anycubic Kobra Max 0.4 nozzle.json"

resources/profiles/Anycubic/Anycubic Kobra 3 Max_buildplate_texture.svg

@@ -0,0 +1,23 @@
+<svg width="430" height="430" viewBox="0 0 430 430" fill="none" xmlns="http://www.w3.org/2000/svg">
+<path opacity="0.9" fill-rule="evenodd" clip-rule="evenodd" d="M368.377 412.523L374.006 417.939L377.421 418.271L372.967 414.354L368.377 412.523Z" fill="white"/>
+<path fill-rule="evenodd" clip-rule="evenodd" d="M373.927 417.992L368.301 412.558L364.834 418.797L368.702 424.569L373.927 417.992Z" fill="white"/>
+<path fill-rule="evenodd" clip-rule="evenodd" d="M368.777 424.583L374.014 418.026L377.441 418.331L373.326 422.933L368.777 424.583Z" fill="white"/>
+<path d="M393.901 415.736H392.397L393.928 417.902L394.694 416.863L393.901 415.736Z" fill="white"/>
+<path d="M390.735 418.926L386.924 415.551V417.182L391.963 421.632V415.736H390.735V418.926Z" fill="white"/>
+<path d="M396.399 415.736L394.363 418.522V421.449H395.597V418.921L397.921 415.736H396.399Z" fill="white"/>
+<path d="M382.474 416.806L383.764 419.294H383.281L382.668 420.494H384.373L384.871 421.449H386.248L383.17 415.474L382.474 416.806Z" fill="white"/>
+<path d="M386.924 421.449V421.452H388.152V419.166L386.924 418.087V421.449Z" fill="white"/>
+<path d="M382.103 417.545L380.096 421.45H381.468L382.787 418.887L382.103 417.545Z" fill="white"/>
+<path d="M413.853 419.118C414.05 419.069 414.235 418.982 414.398 418.862C414.619 418.701 414.797 418.489 414.917 418.242C415.036 417.996 415.093 417.724 415.082 417.45C415.089 417.185 415.031 416.922 414.913 416.684C414.794 416.447 414.619 416.243 414.402 416.09C414.23 415.961 414.035 415.868 413.827 415.814C413.544 415.754 413.255 415.727 412.966 415.736H412.657V416.95H413.098C413.289 416.935 413.48 416.965 413.657 417.038C413.729 417.079 413.788 417.141 413.827 417.214C413.867 417.288 413.884 417.372 413.878 417.454C413.884 417.551 413.861 417.647 413.811 417.731C413.761 417.815 413.687 417.88 413.599 417.92C413.424 417.982 413.238 418.008 413.052 417.997H412.657V419.197H413.098C413.352 419.202 413.606 419.175 413.853 419.118Z" fill="white"/>
+<path d="M398.496 416.768C398.086 417.291 397.866 417.939 397.872 418.604C397.873 419.063 397.98 419.516 398.183 419.928C398.386 420.34 398.681 420.699 399.046 420.979C399.487 421.316 400.008 421.532 400.559 421.603V420.364C400.101 420.266 399.697 419.997 399.43 419.611C399.254 419.358 399.146 419.064 399.118 418.757C399.091 418.45 399.143 418.141 399.271 417.86C399.372 417.626 399.523 417.418 399.712 417.249C399.957 417.04 400.249 416.895 400.564 416.828V415.586C400.158 415.634 399.764 415.763 399.409 415.966C399.055 416.169 398.744 416.442 398.496 416.768Z" fill="white"/>
+<path d="M402.331 417.525L403.293 416.76C403.057 416.439 402.756 416.171 402.411 415.972C402.052 415.772 401.658 415.644 401.25 415.595V416.837C401.684 416.923 402.07 417.169 402.331 417.525Z" fill="white"/>
+<path d="M423.393 417.525L424.357 416.76C424.12 416.44 423.82 416.171 423.475 415.972C423.117 415.772 422.723 415.644 422.314 415.595V416.837C422.747 416.924 423.133 417.169 423.393 417.525Z" fill="white"/>
+<path d="M413.886 419.578C413.895 419.618 413.9 419.659 413.9 419.7C413.91 419.805 413.883 419.911 413.825 419.999C413.766 420.088 413.679 420.154 413.578 420.186C413.41 420.231 413.236 420.251 413.062 420.244H412.667V421.445H413.07C413.335 421.45 413.599 421.426 413.858 421.374C414.053 421.33 414.236 421.249 414.399 421.134C414.621 420.977 414.801 420.768 414.923 420.525C415.051 420.277 415.118 420.002 415.118 419.724C415.12 419.469 415.069 419.215 414.967 418.981C414.692 419.305 414.307 419.518 413.886 419.578Z" fill="white"/>
+<path d="M419.56 416.768C419.15 417.291 418.93 417.939 418.938 418.604C418.939 419.063 419.044 419.517 419.248 419.928C419.451 420.34 419.747 420.699 420.111 420.979C420.552 421.317 421.074 421.532 421.625 421.603V420.364C421.165 420.266 420.76 419.997 420.493 419.611C420.317 419.358 420.211 419.064 420.183 418.757C420.155 418.45 420.208 418.141 420.334 417.86C420.435 417.626 420.585 417.417 420.775 417.249C421.019 417.039 421.313 416.895 421.627 416.828V415.586C421.221 415.634 420.828 415.763 420.473 415.966C420.118 416.169 419.808 416.442 419.56 416.768Z" fill="white"/>
+<path d="M401.243 420.366V421.608C401.649 421.564 402.041 421.438 402.396 421.237C402.75 421.036 403.061 420.764 403.306 420.439L402.335 419.687C402.067 420.04 401.679 420.282 401.243 420.366Z" fill="white"/>
+<path d="M423.398 419.687C423.128 420.042 422.735 420.285 422.295 420.366V421.608C422.701 421.564 423.093 421.438 423.449 421.237C423.803 421.036 424.113 420.764 424.359 420.439L423.398 419.687Z" fill="white"/>
+<path d="M417.626 415.736H416.396V421.449H417.626V415.736Z" fill="white"/>
+<path d="M405.92 419.832C405.795 419.532 405.74 419.206 405.761 418.882V415.736H404.528V418.994C404.517 419.344 404.564 419.692 404.665 420.026C404.76 420.31 404.915 420.571 405.119 420.79C405.302 420.994 405.519 421.164 405.761 421.292C406.002 421.426 406.264 421.517 406.536 421.564V420.309C406.28 420.229 406.062 420.06 405.92 419.832Z" fill="white"/>
+<path d="M407.999 418.886C408.02 419.216 407.962 419.547 407.832 419.85C407.689 420.074 407.468 420.237 407.212 420.309V421.564C407.485 421.52 407.748 421.43 407.99 421.297C408.231 421.164 408.449 420.993 408.634 420.79C408.84 420.571 408.996 420.311 409.091 420.026C409.191 419.692 409.237 419.344 409.228 418.994V415.736H407.999V418.886Z" fill="white"/>
+<path d="M411.97 415.736H410.74V421.449H411.97V415.736Z" fill="white"/>
+</svg>

resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 Max 0.4 nozzle.json

@@ -0,0 +1,297 @@
+{
+	"type": "filament",
+	"name": "Anycubic ABS @Anycubic Kobra 3 Max 0.4 nozzle",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFB99",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic ABS @Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"5"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"5"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"15"
+	],
+	"fan_min_speed": [
+		"1"
+	],
+	"filament_cooling_final_speed": [
+		"3.4"
+	],
+	"filament_cooling_initial_speed": [
+		"2.2"
+	],
+	"filament_cooling_moves": [
+		"4"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.05"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_load_time": [
+		"42"
+	],
+	"filament_loading_speed": [
+		"28"
+	],
+	"filament_loading_speed_start": [
+		"3"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"41"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"0%"
+	],
+	"filament_retract_lift_above": [
+		"0.3"
+	],
+	"filament_retract_lift_below": [
+		"499"
+	],
+	"filament_retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_type": [
+		"ABS"
+	],
+	"filament_unload_time": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"90"
+	],
+	"filament_unloading_speed_start": [
+		"100"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"100"
+	],
+	"hot_plate_temp": [
+		"95"
+	],
+	"hot_plate_temp_initial_layer": [
+		"95"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.03"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"16"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"95"
+	],
+	"textured_plate_temp_initial_layer": [
+		"95"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 Max 0.6 nozzle.json

@@ -0,0 +1,306 @@
+{
+	"type": "filament",
+	"name": "Anycubic ABS @Anycubic Kobra 3 Max 0.6 nozzle",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFB99",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic ABS @Anycubic Kobra 3 Max 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"15"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.6 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"15"
+	],
+	"fan_min_speed": [
+		"1"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_load_time": [
+		"42"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"0"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_type": [
+		"ABS"
+	],
+	"filament_unload_time": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.03"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"16"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle.json

@@ -0,0 +1,306 @@
+{
+	"type": "filament",
+	"name": "Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFB99",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"15"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.8 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"1"
+	],
+	"filament_cooling_final_speed": [
+		"3.4"
+	],
+	"filament_cooling_initial_speed": [
+		"2.2"
+	],
+	"filament_cooling_moves": [
+		"4"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_load_time": [
+		"42"
+	],
+	"filament_loading_speed": [
+		"28"
+	],
+	"filament_loading_speed_start": [
+		"3"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"41"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.4"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"45"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_type": [
+		"ABS"
+	],
+	"filament_unload_time": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"90"
+	],
+	"filament_unloading_speed_start": [
+		"100"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.03"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"16"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 Max 0.6 nozzle.json

@@ -0,0 +1,306 @@
+{
+	"type": "filament",
+	"name": "Anycubic ASA @Anycubic Kobra 3 Max 0.6 nozzle",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFA99",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic ASA @Anycubic Kobra 3 Max 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"15"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.6 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"15"
+	],
+	"fan_min_speed": [
+		"1"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_load_time": [
+		"42"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"0"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_type": [
+		"ASA"
+	],
+	"filament_unload_time": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.03"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"16"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle.json

@@ -0,0 +1,306 @@
+{
+	"type": "filament",
+	"name": "Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFA99",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"15"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.8 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"1"
+	],
+	"filament_cooling_final_speed": [
+		"3.4"
+	],
+	"filament_cooling_initial_speed": [
+		"2.2"
+	],
+	"filament_cooling_moves": [
+		"4"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_load_time": [
+		"42"
+	],
+	"filament_loading_speed": [
+		"28"
+	],
+	"filament_loading_speed_start": [
+		"3"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"41"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.4"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"45"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_type": [
+		"ASA"
+	],
+	"filament_unload_time": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"90"
+	],
+	"filament_unloading_speed_start": [
+		"100"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.03"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"16"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic Generic ABS.json

@@ -22,6 +22,7 @@
 		"Anycubic 4Max Pro 0.4 nozzle",
 		"Anycubic 4Max Pro 2 0.4 nozzle",
 		"Anycubic Kobra 2 0.4 nozzle",
-		"Anycubic Kobra 3 0.4 nozzle"
+		"Anycubic Kobra 3 0.4 nozzle",
+		"Anycubic Kobra 3 Max 0.4 nozzle"
 	]
 }

resources/profiles/Anycubic/filament/Anycubic Generic ASA.json

@@ -17,6 +17,7 @@
 		"Anycubic Chiron 0.4 nozzle",
 		"Anycubic Vyper 0.4 nozzle",
 		"Anycubic Kobra 0.4 nozzle",
+		"Anycubic Kobra 3 Max 0.4 nozzle",
 		"Anycubic Kobra Max 0.4 nozzle",
 		"Anycubic Kobra Plus 0.4 nozzle",
 		"Anycubic 4Max Pro 0.4 nozzle",

resources/profiles/Anycubic/filament/Anycubic Generic PETG.json

@@ -52,6 +52,7 @@
 		"Anycubic 4Max Pro 0.4 nozzle",
 		"Anycubic 4Max Pro 2 0.4 nozzle",
 		"Anycubic Kobra 2 0.4 nozzle",
-		"Anycubic Kobra 3 0.4 nozzle"
+		"Anycubic Kobra 3 0.4 nozzle",
+		"Anycubic Kobra 3 Max 0.4 nozzle"
 	]
 }

resources/profiles/Anycubic/filament/Anycubic Generic PLA.json

@@ -28,6 +28,7 @@
 		"Anycubic Kobra 3 0.2 nozzle",
 		"Anycubic Kobra 3 0.4 nozzle",
 		"Anycubic Kobra 3 0.6 nozzle",
-		"Anycubic Kobra 3 0.8 nozzle"
+		"Anycubic Kobra 3 0.8 nozzle",
+		"Anycubic Kobra 3 Max 0.4 nozzle"
 	]
 }

resources/profiles/Anycubic/filament/Anycubic Generic TPU.json

@@ -19,6 +19,7 @@
 		"Anycubic 4Max Pro 0.4 nozzle",
 		"Anycubic 4Max Pro 2 0.4 nozzle",
 		"Anycubic Kobra 2 0.4 nozzle",
-		"Anycubic Kobra 3 0.4 nozzle"
+		"Anycubic Kobra 3 0.4 nozzle",
+		"Anycubic Kobra 3 Max 0.4 nozzle"
 	]
 }

resources/profiles/Anycubic/filament/Anycubic PEBA 95A @Anycubic Kobra 3 Max 0.4 nozzle.json

@@ -0,0 +1,297 @@
+{
+	"type": "filament",
+	"name": "Anycubic PEBA 95A @Anycubic Kobra 3 Max 0.4 nozzle",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFU99",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PEBA 95A @Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"5"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cooling_final_speed": [
+		"3.4"
+	],
+	"filament_cooling_initial_speed": [
+		"2.2"
+	],
+	"filament_cooling_moves": [
+		"4"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"8"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_load_time": [
+		"42"
+	],
+	"filament_loading_speed": [
+		"28"
+	],
+	"filament_loading_speed_start": [
+		"3"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"41"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"100%"
+	],
+	"filament_retract_lift_above": [
+		"0"
+	],
+	"filament_retract_lift_below": [
+		"499"
+	],
+	"filament_retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_type": [
+		"PEBA"
+	],
+	"filament_unload_time": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"90"
+	],
+	"filament_unloading_speed_start": [
+		"100"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 Max 0.4 nozzle.json

@@ -0,0 +1,297 @@
+{
+	"type": "filament",
+	"name": "Anycubic PETG @Anycubic Kobra 3 Max 0.4 nozzle",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFG99",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PETG @Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"nozzle_temperature": [
+		"225"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"5"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"50"
+	],
+	"filament_cooling_final_speed": [
+		"3.4"
+	],
+	"filament_cooling_initial_speed": [
+		"2.2"
+	],
+	"filament_cooling_moves": [
+		"4"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_load_time": [
+		"42"
+	],
+	"filament_loading_speed": [
+		"28"
+	],
+	"filament_loading_speed_start": [
+		"3"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"41"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"0%"
+	],
+	"filament_retract_lift_above": [
+		"0.3"
+	],
+	"filament_retract_lift_below": [
+		"499"
+	],
+	"filament_retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_unload_time": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"90"
+	],
+	"filament_unloading_speed_start": [
+		"100"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"6"
+	],
+	"hot_plate_temp": [
+		"75"
+	],
+	"hot_plate_temp_initial_layer": [
+		"75"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"215"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"75"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 Max 0.6 nozzle.json

@@ -0,0 +1,297 @@
+{
+	"type": "filament",
+	"name": "Anycubic PETG @Anycubic Kobra 3 Max 0.6 nozzle",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFG99",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PETG @Anycubic Kobra 3 Max 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"225"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.6 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"5"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"50"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_load_time": [
+		"42"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"0"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_unload_time": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"6"
+	],
+	"hot_plate_temp": [
+		"75"
+	],
+	"hot_plate_temp_initial_layer": [
+		"75"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"215"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"75"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle.json

@@ -0,0 +1,297 @@
+{
+	"type": "filament",
+	"name": "Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFG99",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"225"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.8 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"5"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"50"
+	],
+	"filament_cooling_final_speed": [
+		"3.4"
+	],
+	"filament_cooling_initial_speed": [
+		"2.2"
+	],
+	"filament_cooling_moves": [
+		"4"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_load_time": [
+		"42"
+	],
+	"filament_loading_speed": [
+		"28"
+	],
+	"filament_loading_speed_start": [
+		"3"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"41"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_unload_time": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"90"
+	],
+	"filament_unloading_speed_start": [
+		"100"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"6"
+	],
+	"hot_plate_temp": [
+		"75"
+	],
+	"hot_plate_temp_initial_layer": [
+		"75"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"235"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"215"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.036"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"75"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 Max 0.4 nozzle.json

@@ -0,0 +1,297 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA @Anycubic Kobra 3 Max 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFL99",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA @Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.965"
+	],
+	"filament_max_volumetric_speed": [
+		"13"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cooling_final_speed": [
+		"3.4"
+	],
+	"filament_cooling_initial_speed": [
+		"2.2"
+	],
+	"filament_cooling_moves": [
+		"4"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_load_time": [
+		"42"
+	],
+	"filament_loading_speed": [
+		"28"
+	],
+	"filament_loading_speed_start": [
+		"3"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"41"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"0%"
+	],
+	"filament_retract_lift_above": [
+		"0.3"
+	],
+	"filament_retract_lift_below": [
+		"499"
+	],
+	"filament_retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_unload_time": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"90"
+	],
+	"filament_unloading_speed_start": [
+		"100"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.036"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"9"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 Max 0.6 nozzle.json

@@ -0,0 +1,306 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA @Anycubic Kobra 3 Max 0.6 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFL99",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA @Anycubic Kobra 3 Max 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.6 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_load_time": [
+		"42"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"0"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_unload_time": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.036"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"9"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle.json

@@ -0,0 +1,306 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFL99",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.8 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cooling_final_speed": [
+		"3.4"
+	],
+	"filament_cooling_initial_speed": [
+		"2.2"
+	],
+	"filament_cooling_moves": [
+		"4"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_load_time": [
+		"42"
+	],
+	"filament_loading_speed": [
+		"28"
+	],
+	"filament_loading_speed_start": [
+		"3"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"41"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_unload_time": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"90"
+	],
+	"filament_unloading_speed_start": [
+		"100"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.036"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"9"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle.json

@@ -0,0 +1,297 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFL99",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"nozzle_temperature": [
+		"205"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cooling_final_speed": [
+		"3.4"
+	],
+	"filament_cooling_initial_speed": [
+		"2.2"
+	],
+	"filament_cooling_moves": [
+		"4"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_load_time": [
+		"42"
+	],
+	"filament_loading_speed": [
+		"28"
+	],
+	"filament_loading_speed_start": [
+		"3"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"41"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"0%"
+	],
+	"filament_retract_lift_above": [
+		"0.3"
+	],
+	"filament_retract_lift_below": [
+		"499"
+	],
+	"filament_retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_unload_time": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"90"
+	],
+	"filament_unloading_speed_start": [
+		"100"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.026"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle.json

@@ -0,0 +1,297 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFL99",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"13"
+	],
+	"nozzle_temperature": [
+		"190"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cooling_final_speed": [
+		"3.4"
+	],
+	"filament_cooling_initial_speed": [
+		"2.2"
+	],
+	"filament_cooling_moves": [
+		"4"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_load_time": [
+		"42"
+	],
+	"filament_loading_speed": [
+		"28"
+	],
+	"filament_loading_speed_start": [
+		"3"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"41"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"0%"
+	],
+	"filament_retract_lift_above": [
+		"0.3"
+	],
+	"filament_retract_lift_below": [
+		"499"
+	],
+	"filament_retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_unload_time": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"90"
+	],
+	"filament_unloading_speed_start": [
+		"100"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"200"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.03"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"9"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle.json

@@ -0,0 +1,297 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFL99",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"13"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cooling_final_speed": [
+		"3.4"
+	],
+	"filament_cooling_initial_speed": [
+		"2.2"
+	],
+	"filament_cooling_moves": [
+		"4"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_load_time": [
+		"42"
+	],
+	"filament_loading_speed": [
+		"28"
+	],
+	"filament_loading_speed_start": [
+		"3"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"41"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"0%"
+	],
+	"filament_retract_lift_above": [
+		"0.3"
+	],
+	"filament_retract_lift_below": [
+		"499"
+	],
+	"filament_retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_unload_time": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"90"
+	],
+	"filament_unloading_speed_start": [
+		"100"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.03"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"9"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle.json

@@ -0,0 +1,297 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFL99",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"13"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cooling_final_speed": [
+		"3.4"
+	],
+	"filament_cooling_initial_speed": [
+		"2.2"
+	],
+	"filament_cooling_moves": [
+		"4"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_load_time": [
+		"42"
+	],
+	"filament_loading_speed": [
+		"28"
+	],
+	"filament_loading_speed_start": [
+		"3"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"41"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"0%"
+	],
+	"filament_retract_lift_above": [
+		"0"
+	],
+	"filament_retract_lift_below": [
+		"499"
+	],
+	"filament_retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_unload_time": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"210"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.04"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"9"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra 3 Max 0.4 nozzle.json

@@ -0,0 +1,297 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA+ @Anycubic Kobra 3 Max 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFL99",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA+ @Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_max_volumetric_speed": [
+		"14"
+	],
+	"nozzle_temperature": [
+		"205"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cooling_final_speed": [
+		"3.4"
+	],
+	"filament_cooling_initial_speed": [
+		"2.2"
+	],
+	"filament_cooling_moves": [
+		"4"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_load_time": [
+		"42"
+	],
+	"filament_loading_speed": [
+		"28"
+	],
+	"filament_loading_speed_start": [
+		"3"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"41"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"0%"
+	],
+	"filament_retract_lift_above": [
+		"0.3"
+	],
+	"filament_retract_lift_below": [
+		"499"
+	],
+	"filament_retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_unload_time": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"90"
+	],
+	"filament_unloading_speed_start": [
+		"100"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"215"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.03"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"9"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 Max 0.4 nozzle.json

@@ -0,0 +1,297 @@
+{
+	"type": "filament",
+	"name": "Anycubic TPU @Anycubic Kobra 3 Max 0.4 nozzle",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFU99",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic TPU @Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"3.2"
+	],
+	"nozzle_temperature": [
+		"205"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cooling_final_speed": [
+		"3.4"
+	],
+	"filament_cooling_initial_speed": [
+		"2.2"
+	],
+	"filament_cooling_moves": [
+		"4"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.08"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_load_time": [
+		"42"
+	],
+	"filament_loading_speed": [
+		"28"
+	],
+	"filament_loading_speed_start": [
+		"3"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"41"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"0%"
+	],
+	"filament_retract_lift_above": [
+		"0.3"
+	],
+	"filament_retract_lift_below": [
+		"499"
+	],
+	"filament_retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_type": [
+		"TPU"
+	],
+	"filament_unload_time": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"90"
+	],
+	"filament_unloading_speed_start": [
+		"100"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"215"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 Max 0.6 nozzle.json

@@ -0,0 +1,306 @@
+{
+	"type": "filament",
+	"name": "Anycubic TPU @Anycubic Kobra 3 Max 0.6 nozzle",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFU99",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic TPU @Anycubic Kobra 3 Max 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"240"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.6 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"5"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"50"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_load_time": [
+		"42"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"0"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_type": [
+		"TPU"
+	],
+	"filament_unload_time": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"6"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"nozzle_temperature_initial_layer": [
+		"240"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.02"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"75"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle.json

@@ -0,0 +1,306 @@
+{
+	"type": "filament",
+	"name": "Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFU99",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"240"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.8 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"5"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"50"
+	],
+	"filament_cooling_final_speed": [
+		"3.4"
+	],
+	"filament_cooling_initial_speed": [
+		"2.2"
+	],
+	"filament_cooling_moves": [
+		"4"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_load_time": [
+		"42"
+	],
+	"filament_loading_speed": [
+		"28"
+	],
+	"filament_loading_speed_start": [
+		"3"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"41"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_type": [
+		"TPU"
+	],
+	"filament_unload_time": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"90"
+	],
+	"filament_unloading_speed_start": [
+		"100"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"6"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"internal_bridge_fan_speed": [
+		"-1"
+	],
+	"nozzle_temperature_initial_layer": [
+		"240"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"215"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.036"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"supertack_plate_temp": [
+		"35"
+	],
+	"supertack_plate_temp_initial_layer": [
+		"35"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"75"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75"
+	]
+}

resources/profiles/Anycubic/filament/Generic PETG Basic @Anycubic Kobra 3 Max 0.4 nozzle.json

@@ -0,0 +1,297 @@
+{
+	"type": "filament",
+	"name": "Generic PETG Basic @Anycubic Kobra 3 Max 0.4 nozzle",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "GFSA04",
+	"filament_id": "GFG99",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Generic PETG Basic @Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"adaptive_pressure_advance": [
+		"0"
+	],
+	"adaptive_pressure_advance_bridges": [
+		"0"
+	],
+	"adaptive_pressure_advance_model": [
+		"0,0,0\n0,0,0"
+	],
+	"adaptive_pressure_advance_overhangs": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"5"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"0"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"45"
+	],
+	"eng_plate_temp_initial_layer": [
+		"45"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"50"
+	],
+	"filament_cooling_final_speed": [
+		"3.4"
+	],
+	"filament_cooling_initial_speed": [
+		"2.2"
+	],
+	"filament_cooling_moves": [
+		"4"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.3"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_load_time": [
+		"42"
+	],
+	"filament_loading_speed": [
+		"28"
+	],
+	"filament_loading_speed_start": [
+		"3"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"41"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"10"
+	],
+	"filament_multitool_ramming_volume": [
+		"10"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"0%"
+	],
+	"filament_retract_lift_above": [
+		"0.3"
+	],
+	"filament_retract_lift_below": [
+		"499"
+	],
+	"filament_retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"filament_retract_restart_extra": [
+		"0"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_shrinkage_compensation_z": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_stamping_distance": [
+		"0"
+	],
+	"filament_stamping_loading_speed": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_unload_time": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"90"
+	],
+	"filament_unloading_speed_start": [
+		"100"
+	],
+	"filament_vendor": [
+		"Generic"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"6"
+	],
+	"hot_plate_temp": [
+		"75"
+	],
+	"hot_plate_temp_initial_layer": [
+		"75"
+	],
+	"idle_temperature": [
+		"0"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260"
+	],
+	"nozzle_temperature_range_high": [
+		"270"
+	],
+	"nozzle_temperature_range_low": [
+		"230"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pellet_flow_coefficient": [
+		"0.4157"
+	],
+	"pressure_advance": [
+		"0.04"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_cool_plate_temp": [
+		"40"
+	],
+	"textured_cool_plate_temp_initial_layer": [
+		"40"
+	],
+	"textured_plate_temp": [
+		"75"
+	],
+	"textured_plate_temp_initial_layer": [
+		"75"
+	]
+}

resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.4 nozzle.json

@@ -0,0 +1,265 @@
+{
+	"type": "machine",
+	"name": "Anycubic Kobra 3 Max 0.4 nozzle",
+	"inherits": "fdm_machine_common",
+	"from": "system",
+	"setting_id": "GM007",
+	"instantiation": "true",
+	"printer_technology": "FFF",
+	"printer_settings_id": "Anycubic Kobra 3 Max 0.4 nozzle",
+	"printer_model": "Anycubic Kobra 3 Max",
+	"printer_variant": "0.4",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"default_print_profile": "0.20mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
+	"default_filament_profile": [
+		"Anycubic PLA @Anycubic Kobra 3 Max 0.4 nozzle",
+		"Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle",
+		"Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle",
+		"Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle",
+		"Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle",
+		"Anycubic PLA+ @Anycubic Kobra 3 Max 0.4 nozzle",
+		"Generic PLA @Anycubic Kobra 3 Max 0.4 nozzle",
+		"Generic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle",
+		"Anycubic ABS @Anycubic Kobra 3 Max 0.4 nozzle",
+		"Anycubic PEBA 95A @Anycubic Kobra 3 Max 0.4 nozzle",
+		"Anycubic PETG @Anycubic Kobra 3 Max 0.4 nozzle",
+		"Anycubic TPU @Anycubic Kobra 3 Max 0.4 nozzle",
+		"Generic ABS @Anycubic Kobra 3 Max 0.4 nozzle",
+		"Generic PETG @Anycubic Kobra 3 Max 0.4 nozzle",
+		"Generic TPU @Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"disable_m73": "0",
+	"gcode_flavor": "klipper",
+	"printable_area": [
+		"3x0",
+		"423x0",
+		"423x420",
+		"3x420"
+	],
+	"printable_height": "501",
+	"thumbnails": "230x110/PNG",
+	"thumbnails_format": "PNG",
+	"thumbnails_internal": "512x512/PNG/top",
+	"thumbnails_internal_switch": "1",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_custom_model": "",
+	"bed_custom_texture": "",
+	"bed_exclude_area": [],
+	"bed_mesh_max": "0,0",
+	"bed_mesh_min": "0,0",
+	"bed_mesh_probe_distance": "0,0",
+	"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G1 E-2 F2400\n;;; G1 Z{max(toolchange_z+0.6, 5.0)} F600\n;;; G1 X445.0 F12000\n;;; G1 E-5 F600\n;;; G1 X472.7 F600\n;;; M400 P3530\n;;; G1 E-1 F600\n;;; G1 Z{max(toolchange_z+2.6, 7.0)}  F600\n;;; G1 X445 F18000\n;;; G1 X457 F1200\n;;; G1 X445 F1200\n;;; G1 E2 F300\n;;; M400 P31050\n;;; M400 P17510\n; 2\n;;; G1 X445 F18000\n;;; G1 X457 F1200\n;;; G1 X445 F1200\n;;; G1 E2 F300\n;;; M400 P0\n;;; G1 X420 F6000\n;;; M400 P0\n;;; G1 X445 F18000\n;;; G1 X457 F1200\n;;; G1 X445 F1200\n;;; G1 E2 F300\n;;; M400 P0\n; 3.1\n;;; M106 S255\n;;; G1 X42 Y430.5 Z-0.8 F9600\n;;; G1 X46 Y430.5 Z1 F9600\n;;; G1 X98 Y430.5 Z1 F9600\n;;; G1 X102 Y430.5 Z-0.8 F9600\n;;; G1 X102 Y428 Z-0.8 F9600\n;;; G1 X98 Y428 Z1 F9600\n;;; G1 X48 Y428 Z1 F9600\n;;; G1 X42 Y428 Z-0.8 F9600\n; 3.2\n;;; G1 X42 Y430.5 Z-0.8 F9600\n;;; G1 X46 Y430.5 Z1 F9600\n;;; G1 X98 Y430.5 Z1 F9600\n;;; G1 X102 Y430.5 Z-0.8 F9600\n;;; G1 X102 Y428 Z-0.8 F9600\n;;; G1 X98 Y428 Z1 F9600\n;;; G1 X48 Y428 Z1 F9600\n;;; G1 X42 Y428 Z-0.8 F9600\n; 3.3\n;;; G1 X42 Y430.5 Z-0.8 F9600\n;;; G1 X46 Y430.5 Z1 F9600\n;;; G1 X98 Y430.5 Z1 F9600\n;;; G1 X102 Y430.5 Z-0.8 F9600\n;;; G1 X102 Y428 Z-0.8 F9600\n;;; G1 X98 Y428 Z1 F9600\n;;; G1 X48 Y428 Z1 F9600\n;;; G1 X42 Y428 Z-0.8 F9600\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"deretraction_speed": [
+		"0"
+	],
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "500",
+	"extruder_clearance_height_to_rod": "20",
+	"extruder_clearance_radius": "57",
+	"extruder_colour": [
+		"#FF4D4F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": "M400\nG92 E0 ; zero the extruder\nG1 E-2 F3600\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F900 ; Move print head further up{endif}\nG1 X420 Y420 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors",
+	"machine_load_filament_time": "75",
+	"machine_max_acceleration_e": [
+		"10000",
+		"10000",
+		"10000"
+	],
+	"machine_max_acceleration_extruding": [
+		"10000",
+		"10000",
+		"10000"
+	],
+	"machine_max_acceleration_retracting": [
+		"10000",
+		"10000",
+		"10000"
+	],
+	"machine_max_acceleration_travel": [
+		"10000",
+		"10000",
+		"10000"
+	],
+	"machine_max_acceleration_x": [
+		"10000",
+		"10000",
+		"10000"
+	],
+	"machine_max_acceleration_y": [
+		"10000",
+		"10000",
+		"10000"
+	],
+	"machine_max_acceleration_z": [
+		"3000",
+		"3000",
+		"3000"
+	],
+	"machine_max_jerk_e": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_x": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_y": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_z": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_speed_e": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_x": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_y": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_z": [
+		"20",
+		"10",
+		"26"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"max_layer_height": [
+		"0.28"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "71.9",
+	"parking_pos_retraction": "0",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"printer_notes": "",
+	"printer_structure": "i3",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retract_length_toolchange": [
+		"0"
+	],
+	"retract_lift_above": [
+		"0.3"
+	],
+	"retract_lift_below": [
+		"499"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_on_top_layer": [
+		"1"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"0"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"0.8"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"30"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "1",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "1",
+	"template_custom_gcode": "",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Slope Lift"
+	],
+	"z_offset": "0"
+}

resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.6 nozzle.json

@@ -0,0 +1,235 @@
+{
+	"type": "machine",
+	"name": "Anycubic Kobra 3 Max 0.6 nozzle",
+	"inherits": "fdm_machine_common",
+	"from": "system",
+	"setting_id": "GM007",
+	"instantiation": "true",
+	"printer_technology": "FFF",
+	"printer_settings_id": "Anycubic Kobra 3 Max 0.6 nozzle",
+	"printer_model": "Anycubic Kobra 3 Max",
+	"printer_variant": "0.6",
+	"nozzle_diameter": [
+		"0.6"
+	],
+	"default_print_profile": "0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle",
+	"default_filament_profile": [
+		"Anycubic PLA @Anycubic Kobra 3 Max 0.6 nozzle",
+		"Anycubic ABS @Anycubic Kobra 3 Max 0.6 nozzle",
+		"Anycubic ASA @Anycubic Kobra 3 Max 0.6 nozzle",
+		"Anycubic PETG @Anycubic Kobra 3 Max 0.6 nozzle",
+		"Anycubic TPU @Anycubic Kobra 3 Max 0.6 nozzle"
+	],
+	"disable_m73": "0",
+	"gcode_flavor": "klipper",
+	"printable_area": [
+		"3x0",
+		"423x0",
+		"423x420",
+		"3x420"
+	],
+	"printable_height": "501",
+	"thumbnails": "230x110/PNG",
+	"thumbnails_format": "PNG",
+	"thumbnails_internal": "512x512/PNG/top",
+	"thumbnails_internal_switch": "1",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_custom_model": "",
+	"bed_custom_texture": "",
+	"bed_exclude_area": [],
+	"bed_mesh_max": "0,0",
+	"bed_mesh_min": "0,0",
+	"bed_mesh_probe_distance": "0,0",
+	"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G1 E-2 F2400\n;;; G1 Z{max(toolchange_z+0.6, 5.0)} F600\n;;; G1 X445.0 F12000\n;;; G1 E-5 F600\n;;; G1 X472.7 F600\n;;; M400 P3530\n;;; G1 E-1 F600\n;;; G1 Z{max(toolchange_z+2.6, 7.0)}  F600\n;;; G1 X445 F18000\n;;; G1 X457 F1200\n;;; G1 X445 F1200\n;;; G1 E2 F300\n;;; M400 P31050\n;;; M400 P17510\n; 2\n;;; G1 X445 F18000\n;;; G1 X457 F1200\n;;; G1 X445 F1200\n;;; G1 E2 F300\n;;; M400 P0\n;;; G1 X420 F6000\n;;; M400 P0\n;;; G1 X445 F18000\n;;; G1 X457 F1200\n;;; G1 X445 F1200\n;;; G1 E2 F300\n;;; M400 P0\n; 3.1\n;;; M106 S255\n;;; G1 X42 Y430.5 Z-0.8 F9600\n;;; G1 X46 Y430.5 Z1 F9600\n;;; G1 X98 Y430.5 Z1 F9600\n;;; G1 X102 Y430.5 Z-0.8 F9600\n;;; G1 X102 Y428 Z-0.8 F9600\n;;; G1 X98 Y428 Z1 F9600\n;;; G1 X48 Y428 Z1 F9600\n;;; G1 X42 Y428 Z-0.8 F9600\n; 3.2\n;;; G1 X42 Y430.5 Z-0.8 F9600\n;;; G1 X46 Y430.5 Z1 F9600\n;;; G1 X98 Y430.5 Z1 F9600\n;;; G1 X102 Y430.5 Z-0.8 F9600\n;;; G1 X102 Y428 Z-0.8 F9600\n;;; G1 X98 Y428 Z1 F9600\n;;; G1 X48 Y428 Z1 F9600\n;;; G1 X42 Y428 Z-0.8 F9600\n; 3.3\n;;; G1 X42 Y430.5 Z-0.8 F9600\n;;; G1 X46 Y430.5 Z1 F9600\n;;; G1 X98 Y430.5 Z1 F9600\n;;; G1 X102 Y430.5 Z-0.8 F9600\n;;; G1 X102 Y428 Z-0.8 F9600\n;;; G1 X98 Y428 Z1 F9600\n;;; G1 X48 Y428 Z1 F9600\n;;; G1 X42 Y428 Z-0.8 F9600\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"deretraction_speed": [
+		"0"
+	],
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "500",
+	"extruder_clearance_height_to_rod": "20",
+	"extruder_clearance_radius": "57",
+	"extruder_colour": [
+		"#FF4D4F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": "M400\nG92 E0 ; zero the extruder\nG1 E-2 F3600\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F900 ; Move print head further up{endif}\nG1 X420 Y420 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors",
+	"machine_load_filament_time": "75",
+	"machine_max_acceleration_e": [
+		"10000",
+		"10000"
+	],
+	"machine_max_acceleration_extruding": [
+		"10000",
+		"10000"
+	],
+	"machine_max_acceleration_retracting": [
+		"10000",
+		"10000"
+	],
+	"machine_max_acceleration_travel": [
+		"10000",
+		"10000"
+	],
+	"machine_max_acceleration_x": [
+		"10000",
+		"10000"
+	],
+	"machine_max_acceleration_y": [
+		"10000",
+		"10000"
+	],
+	"machine_max_acceleration_z": [
+		"3000",
+		"3000"
+	],
+	"machine_max_jerk_e": [
+		"20",
+		"20"
+	],
+	"machine_max_jerk_x": [
+		"20",
+		"20"
+	],
+	"machine_max_jerk_y": [
+		"20",
+		"20"
+	],
+	"machine_max_jerk_z": [
+		"20",
+		"20"
+	],
+	"machine_max_speed_e": [
+		"600",
+		"600"
+	],
+	"machine_max_speed_x": [
+		"600",
+		"600"
+	],
+	"machine_max_speed_y": [
+		"600",
+		"600"
+	],
+	"machine_max_speed_z": [
+		"20",
+		"20"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"max_layer_height": [
+		"0.42"
+	],
+	"min_layer_height": [
+		"0.12"
+	],
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "71.9",
+	"parking_pos_retraction": "0",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"printer_notes": "",
+	"printer_structure": "i3",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retract_length_toolchange": [
+		"0"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"499"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"0"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"0.8"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"30"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "1",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "0",
+	"support_chamber_temp_control": "0",
+	"support_multi_bed_types": "1",
+	"template_custom_gcode": "",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Slope Lift"
+	],
+	"z_offset": "0"
+}

resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.8 nozzle.json

@@ -0,0 +1,238 @@
+{
+	"type": "machine",
+	"name": "Anycubic Kobra 3 Max 0.8 nozzle",
+	"inherits": "fdm_machine_common",
+	"from": "system",
+	"setting_id": "GM007",
+	"instantiation": "true",
+	"printer_technology": "FFF",
+	"printer_settings_id": "Anycubic Kobra 3 Max 0.8 nozzle",
+	"printer_model": "Anycubic Kobra 3 Max",
+	"printer_variant": "0.8",
+	"nozzle_diameter": [
+		"0.8"
+	],
+	"default_print_profile": "0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
+	"default_filament_profile": [
+		"Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle",
+		"Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle",
+		"Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle",
+		"Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle",
+		"Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle"
+	],
+	"disable_m73": "0",
+	"gcode_flavor": "klipper",
+	"printable_area": [
+		"3x0",
+		"423x0",
+		"423x420",
+		"3x420"
+	],
+	"printable_height": "501",
+	"thumbnails": "230x110/PNG",
+	"thumbnails_format": "PNG",
+	"thumbnails_internal": "512x512/PNG/top",
+	"thumbnails_internal_switch": "1",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_custom_model": "",
+	"bed_custom_texture": "",
+	"bed_exclude_area": [],
+	"bed_mesh_max": "0,0",
+	"bed_mesh_min": "0,0",
+	"bed_mesh_probe_distance": "0,0",
+	"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G1 E-2 F2400\n;;; G1 Z{max(toolchange_z+0.6, 5.0)} F600\n;;; G1 X445.0 F12000\n;;; G1 E-5 F600\n;;; G1 X472.7 F600\n;;; M400 P3530\n;;; G1 E-1 F600\n;;; G1 Z{max(toolchange_z+2.6, 7.0)}  F600\n;;; G1 X445 F18000\n;;; G1 X457 F1200\n;;; G1 X445 F1200\n;;; G1 E2 F300\n;;; M400 P31050\n;;; M400 P17510\n; 2\n;;; G1 X445 F18000\n;;; G1 X457 F1200\n;;; G1 X445 F1200\n;;; G1 E2 F300\n;;; M400 P0\n;;; G1 X420 F6000\n;;; M400 P0\n;;; G1 X445 F18000\n;;; G1 X457 F1200\n;;; G1 X445 F1200\n;;; G1 E2 F300\n;;; M400 P0\n; 3.1\n;;; M106 S255\n;;; G1 X42 Y430.5 Z-0.8 F9600\n;;; G1 X46 Y430.5 Z1 F9600\n;;; G1 X98 Y430.5 Z1 F9600\n;;; G1 X102 Y430.5 Z-0.8 F9600\n;;; G1 X102 Y428 Z-0.8 F9600\n;;; G1 X98 Y428 Z1 F9600\n;;; G1 X48 Y428 Z1 F9600\n;;; G1 X42 Y428 Z-0.8 F9600\n; 3.2\n;;; G1 X42 Y430.5 Z-0.8 F9600\n;;; G1 X46 Y430.5 Z1 F9600\n;;; G1 X98 Y430.5 Z1 F9600\n;;; G1 X102 Y430.5 Z-0.8 F9600\n;;; G1 X102 Y428 Z-0.8 F9600\n;;; G1 X98 Y428 Z1 F9600\n;;; G1 X48 Y428 Z1 F9600\n;;; G1 X42 Y428 Z-0.8 F9600\n; 3.3\n;;; G1 X42 Y430.5 Z-0.8 F9600\n;;; G1 X46 Y430.5 Z1 F9600\n;;; G1 X98 Y430.5 Z1 F9600\n;;; G1 X102 Y430.5 Z-0.8 F9600\n;;; G1 X102 Y428 Z-0.8 F9600\n;;; G1 X98 Y428 Z1 F9600\n;;; G1 X48 Y428 Z1 F9600\n;;; G1 X42 Y428 Z-0.8 F9600\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"deretraction_speed": [
+		"0"
+	],
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "500",
+	"extruder_clearance_height_to_rod": "20",
+	"extruder_clearance_radius": "57",
+	"extruder_colour": [
+		"#FF4D4F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": "M400\nG92 E0 ; zero the extruder\nG1 E-2 F3600\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F900 ; Move print head further up{endif}\nG1 X420 Y420 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors",
+	"machine_load_filament_time": "75",
+	"machine_max_acceleration_e": [
+		"10000",
+		"10000"
+	],
+	"machine_max_acceleration_extruding": [
+		"10000",
+		"10000"
+	],
+	"machine_max_acceleration_retracting": [
+		"10000",
+		"10000"
+	],
+	"machine_max_acceleration_travel": [
+		"10000",
+		"10000"
+	],
+	"machine_max_acceleration_x": [
+		"10000",
+		"10000"
+	],
+	"machine_max_acceleration_y": [
+		"10000",
+		"10000"
+	],
+	"machine_max_acceleration_z": [
+		"3000",
+		"3000"
+	],
+	"machine_max_jerk_e": [
+		"20",
+		"20"
+	],
+	"machine_max_jerk_x": [
+		"20",
+		"20"
+	],
+	"machine_max_jerk_y": [
+		"20",
+		"20"
+	],
+	"machine_max_jerk_z": [
+		"20",
+		"20"
+	],
+	"machine_max_speed_e": [
+		"600",
+		"600"
+	],
+	"machine_max_speed_x": [
+		"600",
+		"600"
+	],
+	"machine_max_speed_y": [
+		"600",
+		"600"
+	],
+	"machine_max_speed_z": [
+		"20",
+		"20"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M601",
+	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"max_layer_height": [
+		"0.56"
+	],
+	"min_layer_height": [
+		"0.16"
+	],
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "71.9",
+	"parking_pos_retraction": "0",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"printer_notes": "",
+	"printer_structure": "i3",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retract_length_toolchange": [
+		"0"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"499"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_on_top_layer": [
+		"1"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"0"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"0.8"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"30"
+	],
+	"scan_first_layer": "0",
+	"silent_mode": "1",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "0",
+	"support_chamber_temp_control": "0",
+	"support_multi_bed_types": "1",
+	"template_custom_gcode": "",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Slope Lift"
+	],
+	"z_offset": "0"
+}

resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max.json

@@ -0,0 +1,13 @@
+{
+	"type": "machine_model",
+	"name": "Anycubic Kobra 3 Max",
+	"machine_tech": "FFF",
+	"family": "Anycubic",
+	"model_id": "Anycubic Kobra 3 Max",
+	"nozzle_diameter": "0.4;0.6;0.8",
+	"bed_model": "Anycubic Kobra 3 Max_buildplate_model.stl",
+	"bed_texture": "Anycubic Kobra 3 Max_buildplate_texture.svg",
+	"default_bed_type": "Textured PEI Plate",
+	"hotend_model": "",
+	"default_materials": "Anycubic PLA @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle;Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 3 Max 0.4 nozzle;Generic PLA @Anycubic Kobra 3 Max 0.4 nozzle;Generic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic ABS @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic ABS @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle;Anycubic ASA @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle;Anycubic PEBA 95A @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PETG @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PETG @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle;Anycubic TPU @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic TPU @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle;Generic ABS @Anycubic Kobra 3 Max 0.4 nozzle;Generic PETG @Anycubic Kobra 3 Max 0.4 nozzle;Generic PETG Basic @Anycubic Kobra 3 Max 0.4 nozzle;Generic TPU @Anycubic Kobra 3 Max 0.4 nozzle"
+}

resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json

@@ -0,0 +1,307 @@
+{
+	"type": "process",
+	"name": "0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "GP004",
+	"instantiation": "true",
+	"print_settings_id": "0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
+	"layer_height": "0.08",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"adaptive_layer_height": "0",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "3000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "5000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.15",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "0",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "150",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "45",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "100%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "45",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "90",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "1",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "70",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"overhang_speed_classic": "0",
+	"overhang_totally_speed": "10",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "30",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "100%",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "0",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "20",
+	"seam_slope_start_height": "0",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_coefficient": "40",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "gyroid",
+	"sparse_infill_speed": "150",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "3",
+	"support_line_width": "0.42",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_top_z_distance": "0.15",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "25%",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "1000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "100",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "1.5",
+	"tree_support_top_rate": "10%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0.1"
+}

resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json

@@ -0,0 +1,307 @@
+{
+	"type": "process",
+	"name": "0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "GP004",
+	"instantiation": "true",
+	"print_settings_id": "0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
+	"layer_height": "0.12",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"adaptive_layer_height": "0",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "3000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "5000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.15",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "0",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "150",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "45",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "100%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "45",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "120",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "120",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "1",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "90",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"overhang_speed_classic": "0",
+	"overhang_totally_speed": "10",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "30",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "100%",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "0",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "20",
+	"seam_slope_start_height": "0",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_coefficient": "40",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "gyroid",
+	"sparse_infill_speed": "150",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "3",
+	"support_line_width": "0.42",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_top_z_distance": "0.15",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "25%",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "1000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "100",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "1.5",
+	"tree_support_top_rate": "10%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0.1"
+}

resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json

@@ -0,0 +1,307 @@
+{
+	"type": "process",
+	"name": "0.16mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "GP004",
+	"instantiation": "true",
+	"print_settings_id": "0.16mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
+	"layer_height": "0.16",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"adaptive_layer_height": "0",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "3000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "5000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.15",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "0",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "150",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "45",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "100%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "45",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "140",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "1",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "120",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"overhang_speed_classic": "0",
+	"overhang_totally_speed": "10",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "30",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "100%",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "0",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "20",
+	"seam_slope_start_height": "0",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_coefficient": "40",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "gyroid",
+	"sparse_infill_speed": "300",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "3",
+	"support_line_width": "0.42",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_top_z_distance": "0.15",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "25%",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "1000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "100",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "1.5",
+	"tree_support_top_rate": "10%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0.1"
+}

resources/profiles/Anycubic/process/0.18mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json

@@ -0,0 +1,320 @@
+{
+	"type": "process",
+	"name": "0.18mm Standard @Anycubic Kobra 3 Max 0.6 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "GP004",
+	"instantiation": "true",
+	"print_settings_id": "0.18mm Standard @Anycubic Kobra 3 Max 0.6 nozzle",
+	"layer_height": "0.18",
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.6 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "3000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "1",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "5000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "1",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "50",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "5000",
+	"initial_layer_infill_speed": "50",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.62",
+	"initial_layer_min_bead_width": "100%",
+	"initial_layer_print_height": "0.3",
+	"initial_layer_speed": "40",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.62",
+	"inner_wall_speed": "150",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.62",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.62",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "1",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.62",
+	"outer_wall_speed": "60",
+	"overhang_1_4_speed": "50",
+	"overhang_2_4_speed": "25",
+	"overhang_3_4_speed": "10",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"overhang_speed_classic": "0",
+	"overhang_totally_speed": "10",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "30",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "100%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_coefficient": "80",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.62",
+	"sparse_infill_pattern": "gyroid",
+	"sparse_infill_speed": "100",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "-5",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.62",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "0",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.2",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "4000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.65",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "150",
+	"travel_acceleration": "5000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "10%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json

@@ -0,0 +1,307 @@
+{
+	"type": "process",
+	"name": "0.20mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "GP004",
+	"instantiation": "true",
+	"print_settings_id": "0.20mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
+	"layer_height": "0.2",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"adaptive_layer_height": "0",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "3000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "5000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.15",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "0",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "250",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "45",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "100%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "45",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "200",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "1",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "150",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"overhang_speed_classic": "0",
+	"overhang_totally_speed": "10",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "30",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "100%",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "0",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "20",
+	"seam_slope_start_height": "0",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_coefficient": "40",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "gyroid",
+	"sparse_infill_speed": "300",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "3",
+	"support_line_width": "0.42",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_top_z_distance": "0.15",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "25%",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "1000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "100",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "1.5",
+	"tree_support_top_rate": "10%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0.1"
+}

resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json

@@ -0,0 +1,320 @@
+{
+	"type": "process",
+	"name": "0.20mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "GP004",
+	"instantiation": "true",
+	"print_settings_id": "0.20mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
+	"layer_height": "0.20",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.8 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "3000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "1",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "5000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "1",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "50",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "40",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.82",
+	"initial_layer_min_bead_width": "100%",
+	"initial_layer_print_height": "0.4",
+	"initial_layer_speed": "40",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.82",
+	"inner_wall_speed": "120",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.82",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "120",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.82",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "1",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.82",
+	"outer_wall_speed": "60",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "40",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "5",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"overhang_speed_classic": "0",
+	"overhang_totally_speed": "10",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "30",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_coefficient": "40",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.82",
+	"sparse_infill_pattern": "gyroid",
+	"sparse_infill_speed": "100",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "3",
+	"support_line_width": "0.82",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.15",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "1000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.82",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "100",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "1.5",
+	"tree_support_top_rate": "10%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Predator.json

@@ -1,29 +1,29 @@
 {
+	"type": "process",
+	"name": "0.20mm Standard @Anycubic Predator",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "GP001",
+	"instantiation": "true",
 	"default_acceleration": "1500",
 	"default_jerk": "9",
 	"exclude_object": "1",
-	"from": "system",
 	"gap_infill_speed": "200",
-	"inherits": "fdm_process_common",
 	"initial_layer_acceleration": "1500",
 	"initial_layer_infill_speed": "100",
 	"initial_layer_speed": "50",
 	"inner_wall_acceleration": "1500",
 	"inner_wall_speed": "200",
-	"instantiation": "true",
 	"internal_solid_infill_speed": "200",
-	"name": "0.20mm Standard @Anycubic Predator",
 	"outer_wall_acceleration": "1500",
 	"outer_wall_speed": "120",
 	"overhang_1_4_speed": "80",
-	"setting_id": "GP001",
 	"sparse_infill_speed": "250",
 	"top_surface_acceleration": "1500",
 	"top_surface_speed": "200",
 	"travel_acceleration": "1500",
 	"travel_speed": "400",
 	"travel_jerk": "9",
-	"type": "process",
 	"compatible_printers": [
 		"Anycubic Predator 0.4 nozzle"
 	]

resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json

@@ -0,0 +1,307 @@
+{
+	"type": "process",
+	"name": "0.24mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "GP004",
+	"instantiation": "true",
+	"print_settings_id": "0.24mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
+	"layer_height": "0.24",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"adaptive_layer_height": "0",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "3000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "5000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.15",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "0",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "150",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "45",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "100%",
+	"initial_layer_print_height": "0.24",
+	"initial_layer_speed": "45",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "150",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "1",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "140",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"overhang_speed_classic": "0",
+	"overhang_totally_speed": "10",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "30",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "100%",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "0",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "20",
+	"seam_slope_start_height": "0",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_coefficient": "40",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "gyroid",
+	"sparse_infill_speed": "150",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "3",
+	"support_line_width": "0.42",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_top_z_distance": "0.15",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "25%",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "1000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "100",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "1.5",
+	"tree_support_top_rate": "10%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0.1"
+}

resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json

@@ -0,0 +1,320 @@
+{
+	"type": "process",
+	"name": "0.24mm Standard @Anycubic Kobra 3 Max 0.6 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "GP004",
+	"instantiation": "true",
+	"print_settings_id": "0.24mm Standard @Anycubic Kobra 3 Max 0.6 nozzle",
+	"layer_height": "0.24",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.6 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "3000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "1",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "5000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "1",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "50",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "5000",
+	"initial_layer_infill_speed": "50",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.62",
+	"initial_layer_min_bead_width": "100%",
+	"initial_layer_print_height": "0.3",
+	"initial_layer_speed": "40",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.62",
+	"inner_wall_speed": "150",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.62",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.62",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "1",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.62",
+	"outer_wall_speed": "60",
+	"overhang_1_4_speed": "50",
+	"overhang_2_4_speed": "15",
+	"overhang_3_4_speed": "10",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"overhang_speed_classic": "0",
+	"overhang_totally_speed": "10",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "30",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "100%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_coefficient": "80",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.62",
+	"sparse_infill_pattern": "gyroid",
+	"sparse_infill_speed": "100",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "-5",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.62",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "0",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.2",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "0.8",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "4000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.62",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "150",
+	"travel_acceleration": "5000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "10%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json

@@ -0,0 +1,320 @@
+{
+	"type": "process",
+	"name": "0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "GP004",
+	"instantiation": "true",
+	"print_settings_id": "0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
+	"layer_height": "0.24",
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.8 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "3000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "1",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "5000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "1",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "50",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "40",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.82",
+	"initial_layer_min_bead_width": "100%",
+	"initial_layer_print_height": "0.4",
+	"initial_layer_speed": "40",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.82",
+	"inner_wall_speed": "120",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.82",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "120",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.82",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "1",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.9",
+	"outer_wall_speed": "60",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"overhang_speed_classic": "0",
+	"overhang_totally_speed": "10",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "30",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_coefficient": "40",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.82",
+	"sparse_infill_pattern": "gyroid",
+	"sparse_infill_speed": "100",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "3",
+	"support_line_width": "0.82",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.15",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "1000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.82",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "100",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "1.5",
+	"tree_support_top_rate": "10%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json

@@ -0,0 +1,307 @@
+{
+	"type": "process",
+	"name": "0.28mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "GP004",
+	"instantiation": "true",
+	"print_settings_id": "0.28mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
+	"layer_height": "0.28",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"adaptive_layer_height": "0",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "3000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "5000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.15",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "0",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "150",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "45",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "100%",
+	"initial_layer_print_height": "0.28",
+	"initial_layer_speed": "45",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "150",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "1",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "140",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"overhang_speed_classic": "0",
+	"overhang_totally_speed": "10",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "30",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "100%",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "0",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "20",
+	"seam_slope_start_height": "0",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_coefficient": "40",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "gyroid",
+	"sparse_infill_speed": "150",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "3",
+	"support_line_width": "0.42",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_top_z_distance": "0.15",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "25%",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "1000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "100",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "1.5",
+	"tree_support_top_rate": "10%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0.1"
+}

resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json

@@ -0,0 +1,320 @@
+{
+	"type": "process",
+	"name": "0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "GP004",
+	"instantiation": "true",
+	"print_settings_id": "0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle",
+	"layer_height": "0.30",
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.6 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "3000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "1",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "5000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "1",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "50",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "5000",
+	"initial_layer_infill_speed": "50",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.62",
+	"initial_layer_min_bead_width": "100%",
+	"initial_layer_print_height": "0.3",
+	"initial_layer_speed": "40",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.62",
+	"inner_wall_speed": "150",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.62",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.62",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "1",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.7",
+	"outer_wall_speed": "60",
+	"overhang_1_4_speed": "50",
+	"overhang_2_4_speed": "25",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"overhang_speed_classic": "0",
+	"overhang_totally_speed": "10",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "30",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "100%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_coefficient": "80",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.62",
+	"sparse_infill_pattern": "gyroid",
+	"sparse_infill_speed": "100",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "-5",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.62",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "0",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.2",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "0.8",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "4000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.7",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "150",
+	"travel_acceleration": "5000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "10%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.32mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json

@@ -0,0 +1,320 @@
+{
+	"type": "process",
+	"name": "0.32mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "GP004",
+	"instantiation": "true",
+	"print_settings_id": "0.32mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
+	"layer_height": "0.32",
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.8 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "3000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "1",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "5000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "1",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "50",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "40",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.82",
+	"initial_layer_min_bead_width": "100%",
+	"initial_layer_print_height": "0.4",
+	"initial_layer_speed": "40",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.82",
+	"inner_wall_speed": "120",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.82",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "120",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.82",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "1",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.95",
+	"outer_wall_speed": "60",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "20",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"overhang_speed_classic": "0",
+	"overhang_totally_speed": "10",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "30",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_coefficient": "40",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.82",
+	"sparse_infill_pattern": "gyroid",
+	"sparse_infill_speed": "100",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "3",
+	"support_line_width": "0.82",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.15",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "1000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.82",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "100",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "1.5",
+	"tree_support_top_rate": "10%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.36mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json

@@ -0,0 +1,320 @@
+{
+	"type": "process",
+	"name": "0.36mm Standard @Anycubic Kobra 3 Max 0.6 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "GP004",
+	"instantiation": "true",
+	"print_settings_id": "0.36mm Standard @Anycubic Kobra 3 Max 0.6 nozzle",
+	"layer_height": "0.36",
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.6 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "3000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "1",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "no_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "5000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "1",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "50",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "5000",
+	"initial_layer_infill_speed": "50",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.62",
+	"initial_layer_min_bead_width": "100%",
+	"initial_layer_print_height": "0.3",
+	"initial_layer_speed": "40",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.62",
+	"inner_wall_speed": "150",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.62",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.62",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "1",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.7",
+	"outer_wall_speed": "60",
+	"overhang_1_4_speed": "50",
+	"overhang_2_4_speed": "25",
+	"overhang_3_4_speed": "10",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"overhang_speed_classic": "0",
+	"overhang_totally_speed": "10",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "30",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "100%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_coefficient": "80",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.62",
+	"sparse_infill_pattern": "gyroid",
+	"sparse_infill_speed": "100",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "-5",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.62",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "0",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.2",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "0.8",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "4000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.62",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "150",
+	"travel_acceleration": "5000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "10%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json

@@ -0,0 +1,320 @@
+{
+	"type": "process",
+	"name": "0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "GP004",
+	"instantiation": "true",
+	"print_settings_id": "0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
+	"layer_height": "0.40",
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.8 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "3000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "1",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "5000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "1",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "50",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "40",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.82",
+	"initial_layer_min_bead_width": "100%",
+	"initial_layer_print_height": "0.4",
+	"initial_layer_speed": "40",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.82",
+	"inner_wall_speed": "120",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.82",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "120",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.82",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "1",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.82",
+	"outer_wall_speed": "60",
+	"overhang_1_4_speed": "50",
+	"overhang_2_4_speed": "25",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"overhang_speed_classic": "0",
+	"overhang_totally_speed": "10",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "30",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_coefficient": "40",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.82",
+	"sparse_infill_pattern": "gyroid",
+	"sparse_infill_speed": "100",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "3",
+	"support_line_width": "0.82",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.15",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "0.96",
+	"top_surface_acceleration": "1000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.82",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "100",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "1.5",
+	"tree_support_top_rate": "10%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.42mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json

@@ -0,0 +1,320 @@
+{
+	"type": "process",
+	"name": "0.42mm Standard @Anycubic Kobra 3 Max 0.6 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "GP004",
+	"instantiation": "true",
+	"print_settings_id": "0.42mm Standard @Anycubic Kobra 3 Max 0.6 nozzle",
+	"layer_height": "0.42",
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.6 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "3000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "1",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "5000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "1",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "50",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "5000",
+	"initial_layer_infill_speed": "50",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.62",
+	"initial_layer_min_bead_width": "100%",
+	"initial_layer_print_height": "0.3",
+	"initial_layer_speed": "40",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.62",
+	"inner_wall_speed": "150",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.62",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.62",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "1",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.7",
+	"outer_wall_speed": "60",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "25",
+	"overhang_3_4_speed": "20",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"overhang_speed_classic": "0",
+	"overhang_totally_speed": "10",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "30",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "100%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_coefficient": "80",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.62",
+	"sparse_infill_pattern": "gyroid",
+	"sparse_infill_speed": "100",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "-5",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.62",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "0",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.2",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "0.8",
+	"top_solid_infill_flow_ratio": "1",
+	"top_surface_acceleration": "4000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.62",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "150",
+	"travel_acceleration": "5000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "10%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.48mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json

@@ -0,0 +1,320 @@
+{
+	"type": "process",
+	"name": "0.48mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "GP004",
+	"instantiation": "true",
+	"print_settings_id": "0.48mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
+	"layer_height": "0.48",
+	"compatible_printers": [
+		"Anycubic Kobra 3 Max 0.8 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "3000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "1",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.1",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "5000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "1",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_extra_bridge_layer": "disabled",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"extrusion_rate_smoothing_external_perimeter_only": "0",
+	"filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_noise_type": "classic",
+	"fuzzy_skin_octaves": "4",
+	"fuzzy_skin_persistence": "0.5",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_scale": "1",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "50",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400%",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_combination_max_layer_height": "100%",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "40",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.82",
+	"initial_layer_min_bead_width": "100%",
+	"initial_layer_print_height": "0.4",
+	"initial_layer_speed": "40",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "5000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.82",
+	"inner_wall_speed": "120",
+	"interface_shells": "0",
+	"interlocking_beam": "0",
+	"interlocking_beam_layer_count": "2",
+	"interlocking_beam_width": "0.8",
+	"interlocking_boundary_avoidance": "2",
+	"interlocking_depth": "2",
+	"interlocking_orientation": "22.5",
+	"internal_bridge_angle": "0",
+	"internal_bridge_density": "100%",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.82",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "120",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_inset": "0",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.15",
+	"ironing_speed": "30",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"lattice_angle_1": "-45",
+	"lattice_angle_2": "45",
+	"line_width": "0.82",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "1",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_skirt_length": "0",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.82",
+	"outer_wall_speed": "60",
+	"overhang_1_4_speed": "50",
+	"overhang_2_4_speed": "25",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"overhang_speed_classic": "0",
+	"overhang_totally_speed": "10",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"preheat_steps": "1",
+	"preheat_time": "30",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "30",
+	"prime_volume": "30",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"single_loop_draft_shield": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"skirt_start_angle": "-135",
+	"skirt_type": "combined",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"smooth_coefficient": "40",
+	"smooth_speed_discontinuity_area": "1",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.82",
+	"sparse_infill_pattern": "gyroid",
+	"sparse_infill_speed": "100",
+	"spiral_finishing_flow_ratio": "0",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"spiral_starting_flow_ratio": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "2.5",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "3",
+	"support_line_width": "0.82",
+	"support_object_first_layer_gap": "0.2",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_threshold_overlap": "50%",
+	"support_top_z_distance": "0.15",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "0.96",
+	"top_surface_acceleration": "1000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.82",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "100",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "300",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "45",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "2",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "1.5",
+	"tree_support_top_rate": "10%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_flow": "100%",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_filament": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/BBL.json

@@ -1,7 +1,7 @@
 {
 	"name": "Bambulab",
 	"url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
-	"version": "02.01.00.10",
+	"version": "02.01.00.12",
 	"force_update": "0",
 	"description": "the initial version of BBL configurations",
 	"machine_model_list": [
@@ -48,6 +48,10 @@
 		{
 			"name": "Bambu Lab X1E",
 			"sub_path": "machine/Bambu Lab X1E.json"
+		},
+		{
+			"name": "Bambu Lab X2D",
+			"sub_path": "machine/Bambu Lab X2D.json"
 		}
 	],
 	"process_list": [
@@ -958,6 +962,70 @@
 		{
 			"name": "0.56mm Standard @BBL X1C 0.8 nozzle",
 			"sub_path": "process/0.56mm Standard @BBL X1C 0.8 nozzle.json"
+		},
+		{
+			"name": "0.08mm High Quality @BBL X2D 0.2 nozzle",
+			"sub_path": "process/0.08mm High Quality @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "0.08mm High Quality @BBL X2D",
+			"sub_path": "process/0.08mm High Quality @BBL X2D.json"
+		},
+		{
+			"name": "0.10mm Standard @BBL X2D 0.2 nozzle",
+			"sub_path": "process/0.10mm Standard @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "0.12mm Balanced Quality @BBL X2D 0.2 nozzle",
+			"sub_path": "process/0.12mm Balanced Quality @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "0.12mm High Quality @BBL X2D",
+			"sub_path": "process/0.12mm High Quality @BBL X2D.json"
+		},
+		{
+			"name": "0.16mm High Quality @BBL X2D",
+			"sub_path": "process/0.16mm High Quality @BBL X2D.json"
+		},
+		{
+			"name": "0.16mm Standard @BBL X2D",
+			"sub_path": "process/0.16mm Standard @BBL X2D.json"
+		},
+		{
+			"name": "0.18mm Balanced Quality @BBL X2D 0.6 nozzle",
+			"sub_path": "process/0.18mm Balanced Quality @BBL X2D 0.6 nozzle.json"
+		},
+		{
+			"name": "0.20mm High Quality @BBL X2D",
+			"sub_path": "process/0.20mm High Quality @BBL X2D.json"
+		},
+		{
+			"name": "0.20mm Standard @BBL X2D",
+			"sub_path": "process/0.20mm Standard @BBL X2D.json"
+		},
+		{
+			"name": "0.24mm Standard @BBL X2D",
+			"sub_path": "process/0.24mm Standard @BBL X2D.json"
+		},
+		{
+			"name": "0.24mm Balanced Quality @BBL X2D 0.6 nozzle",
+			"sub_path": "process/0.24mm Balanced Quality @BBL X2D 0.6 nozzle.json"
+		},
+		{
+			"name": "0.24mm Balanced Quality @BBL X2D 0.8 nozzle",
+			"sub_path": "process/0.24mm Balanced Quality @BBL X2D 0.8 nozzle.json"
+		},
+		{
+			"name": "0.30mm Standard @BBL X2D 0.6 nozzle",
+			"sub_path": "process/0.30mm Standard @BBL X2D 0.6 nozzle.json"
+		},
+		{
+			"name": "0.32mm Balanced Quality @BBL X2D 0.8 nozzle",
+			"sub_path": "process/0.32mm Balanced Quality @BBL X2D 0.8 nozzle.json"
+		},
+		{
+			"name": "0.40mm Standard @BBL X2D 0.8 nozzle",
+			"sub_path": "process/0.40mm Standard @BBL X2D 0.8 nozzle.json"
 		}
 	],
 	"filament_list": [
@@ -8680,6 +8748,734 @@
 		{
 			"name": "BETA HIPS @BBL X1C",
 			"sub_path": "filament/BETA/BETA HIPS @BBL X1C.json"
+		},
+		{
+			"name": "Bambu ABS @BBL X2D",
+			"sub_path": "filament/Bambu ABS @BBL X2D.json"
+		},
+		{
+			"name": "Bambu ABS @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu ABS @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu ABS @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu ABS @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu ABS @BBL X2D 0.8 nozzle",
+			"sub_path": "filament/Bambu ABS @BBL X2D 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu ABS-GF @BBL X2D",
+			"sub_path": "filament/Bambu ABS-GF @BBL X2D.json"
+		},
+		{
+			"name": "Bambu ABS-GF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu ABS-GF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu Support for ABS @BBL X2D",
+			"sub_path": "filament/Bambu Support for ABS @BBL X2D.json"
+		},
+		{
+			"name": "Bambu Support for ABS @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu Support for ABS @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic ABS @BBL X2D",
+			"sub_path": "filament/Generic ABS @BBL X2D.json"
+		},
+		{
+			"name": "Generic ABS @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Generic ABS @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic ABS @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic ABS @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu ASA @BBL X2D",
+			"sub_path": "filament/Bambu ASA @BBL X2D.json"
+		},
+		{
+			"name": "Bambu ASA @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu ASA @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu ASA @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu ASA @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu ASA-Aero @BBL X2D",
+			"sub_path": "filament/Bambu ASA-Aero @BBL X2D.json"
+		},
+		{
+			"name": "Bambu ASA-Aero @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu ASA-Aero @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu ASA-CF @BBL X2D",
+			"sub_path": "filament/Bambu ASA-CF @BBL X2D.json"
+		},
+		{
+			"name": "Bambu ASA-CF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu ASA-CF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic ASA @BBL X2D",
+			"sub_path": "filament/Generic ASA @BBL X2D.json"
+		},
+		{
+			"name": "Generic ASA @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Generic ASA @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic ASA @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic ASA @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic BVOH @BBL X2D",
+			"sub_path": "filament/Generic BVOH @BBL X2D.json"
+		},
+		{
+			"name": "Generic BVOH @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic BVOH @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic EVA @BBL X2D",
+			"sub_path": "filament/Generic EVA @BBL X2D.json"
+		},
+		{
+			"name": "Generic EVA @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic EVA @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic HIPS @BBL X2D",
+			"sub_path": "filament/Generic HIPS @BBL X2D.json"
+		},
+		{
+			"name": "Generic HIPS @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Generic HIPS @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic HIPS @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic HIPS @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PA-CF @BBL X2D",
+			"sub_path": "filament/Bambu PA-CF @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PA-CF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PA-CF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PA6-CF @BBL X2D",
+			"sub_path": "filament/Bambu PA6-CF @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PA6-CF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PA6-CF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PA6-GF @BBL X2D",
+			"sub_path": "filament/Bambu PA6-GF @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PA6-GF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PA6-GF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PAHT-CF @BBL X2D",
+			"sub_path": "filament/Bambu PAHT-CF @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PAHT-CF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PAHT-CF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu Support For PA/PET @BBL X2D",
+			"sub_path": "filament/Bambu Support For PA PET @BBL X2D.json"
+		},
+		{
+			"name": "Bambu Support For PA/PET @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu Support For PA PET @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu Support G @BBL X2D",
+			"sub_path": "filament/Bambu Support G @BBL X2D.json"
+		},
+		{
+			"name": "Bambu Support G @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu Support G @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PA @BBL X2D",
+			"sub_path": "filament/Generic PA @BBL X2D.json"
+		},
+		{
+			"name": "Generic PA @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PA @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PA-CF @BBL X2D",
+			"sub_path": "filament/Generic PA-CF @BBL X2D.json"
+		},
+		{
+			"name": "Generic PA-CF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PA-CF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PC @BBL X2D",
+			"sub_path": "filament/Bambu PC @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PC @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PC @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PC @BBL X2D 0.8 nozzle",
+			"sub_path": "filament/Bambu PC @BBL X2D 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PC FR @BBL X2D",
+			"sub_path": "filament/Bambu PC FR @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PC FR @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PC FR @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PC FR @BBL X2D 0.8 nozzle",
+			"sub_path": "filament/Bambu PC FR @BBL X2D 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic PC @BBL X2D",
+			"sub_path": "filament/Generic PC @BBL X2D.json"
+		},
+		{
+			"name": "Generic PC @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Generic PC @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PC @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PC @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PCTG @BBL X2D",
+			"sub_path": "filament/Generic PCTG @BBL X2D.json"
+		},
+		{
+			"name": "Generic PCTG @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PCTG @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PE @BBL X2D",
+			"sub_path": "filament/Generic PE @BBL X2D.json"
+		},
+		{
+			"name": "Generic PE @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PE @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PE-CF @BBL X2D",
+			"sub_path": "filament/Generic PE-CF @BBL X2D.json"
+		},
+		{
+			"name": "Generic PE-CF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PE-CF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PET-CF @BBL X2D",
+			"sub_path": "filament/Bambu PET-CF @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PET-CF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PET-CF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG Basic @BBL X2D",
+			"sub_path": "filament/Bambu PETG Basic @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PETG Basic @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PETG Basic @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG Basic @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PETG Basic @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG HF @BBL X2D",
+			"sub_path": "filament/Bambu PETG HF @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PETG HF @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PETG HF @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG HF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PETG HF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG Translucent @BBL X2D",
+			"sub_path": "filament/Bambu PETG Translucent @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PETG Translucent @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PETG Translucent @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG Translucent @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PETG Translucent @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG Translucent @BBL X2D 0.8 nozzle",
+			"sub_path": "filament/Bambu PETG Translucent @BBL X2D 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG-CF @BBL X2D",
+			"sub_path": "filament/Bambu PETG-CF @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PETG-CF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PETG-CF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG-CF @BBL X2D 0.8 nozzle",
+			"sub_path": "filament/Bambu PETG-CF @BBL X2D 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic PETG @BBL X2D",
+			"sub_path": "filament/Generic PETG @BBL X2D.json"
+		},
+		{
+			"name": "Generic PETG @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Generic PETG @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PETG @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PETG @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PETG HF @BBL X2D",
+			"sub_path": "filament/Generic PETG HF @BBL X2D.json"
+		},
+		{
+			"name": "Generic PETG HF @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Generic PETG HF @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PETG HF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PETG HF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PETG-CF @BBL X2D",
+			"sub_path": "filament/Generic PETG-CF @BBL X2D.json"
+		},
+		{
+			"name": "Generic PETG-CF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PETG-CF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PHA @BBL X2D",
+			"sub_path": "filament/Generic PHA @BBL X2D.json"
+		},
+		{
+			"name": "Generic PHA @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PHA @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Aero @BBL X2D",
+			"sub_path": "filament/Bambu PLA Aero @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Aero @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Aero @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Basic @BBL X2D",
+			"sub_path": "filament/Bambu PLA Basic @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Basic @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Basic @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Basic @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Basic @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Dynamic @BBL X2D",
+			"sub_path": "filament/Bambu PLA Dynamic @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Dynamic @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Dynamic @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Dynamic @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Dynamic @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Galaxy @BBL X2D",
+			"sub_path": "filament/Bambu PLA Galaxy @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Galaxy @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Galaxy @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Galaxy @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Galaxy @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Glow @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Glow @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Glow @BBL X2D",
+			"sub_path": "filament/Bambu PLA Glow @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Glow @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Glow @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Lite @BBL X2D",
+			"sub_path": "filament/Bambu PLA Lite @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Lite @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Lite @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Lite @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Lite @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Marble @BBL X2D",
+			"sub_path": "filament/Bambu PLA Marble @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Marble @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Marble @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Matte @BBL X2D",
+			"sub_path": "filament/Bambu PLA Matte @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Matte @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Matte @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Matte @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Matte @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Metal @BBL X2D",
+			"sub_path": "filament/Bambu PLA Metal @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Metal @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Metal @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Metal @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Metal @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Silk @BBL X2D",
+			"sub_path": "filament/Bambu PLA Silk @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Silk @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Silk @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Silk @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Silk @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Silk+ @BBL X2D",
+			"sub_path": "filament/Bambu PLA Silk+ @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Silk+ @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Silk+ @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Silk+ @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Silk+ @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Sparkle @BBL X2D",
+			"sub_path": "filament/Bambu PLA Sparkle @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Sparkle @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Sparkle @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Tough @BBL X2D",
+			"sub_path": "filament/Bambu PLA Tough @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Tough @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Tough @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Tough @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Tough @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Tough+ @BBL X2D",
+			"sub_path": "filament/Bambu PLA Tough+ @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Tough+ @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Tough+ @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Tough+ @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Tough+ @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Translucent @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Translucent @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Translucent @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Translucent @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Translucent @BBL X2D 0.6 nozzle",
+			"sub_path": "filament/Bambu PLA Translucent @BBL X2D 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Translucent @BBL X2D 0.8 nozzle",
+			"sub_path": "filament/Bambu PLA Translucent @BBL X2D 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Wood @BBL X2D",
+			"sub_path": "filament/Bambu PLA Wood @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Wood @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Wood @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA-CF @BBL X2D",
+			"sub_path": "filament/Bambu PLA-CF @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA-CF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA-CF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu Support For PLA @BBL X2D",
+			"sub_path": "filament/Bambu Support For PLA @BBL X2D.json"
+		},
+		{
+			"name": "Bambu Support For PLA @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu Support For PLA @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu Support For PLA @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu Support For PLA @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu Support For PLA/PETG @BBL X2D",
+			"sub_path": "filament/Bambu Support For PLA-PETG @BBL X2D.json"
+		},
+		{
+			"name": "Bambu Support For PLA/PETG @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu Support For PLA-PETG @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu Support For PLA/PETG @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu Support For PLA-PETG @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu Support W @BBL X2D",
+			"sub_path": "filament/Bambu Support W @BBL X2D.json"
+		},
+		{
+			"name": "Bambu Support W @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu Support W @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu Support W @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu Support W @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @BBL X2D",
+			"sub_path": "filament/Generic PLA @BBL X2D.json"
+		},
+		{
+			"name": "Generic PLA @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Generic PLA @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PLA @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PLA High Speed @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Generic PLA High Speed @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PLA High Speed @BBL X2D",
+			"sub_path": "filament/Generic PLA High Speed @BBL X2D.json"
+		},
+		{
+			"name": "Generic PLA High Speed @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PLA High Speed @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PLA Silk @BBL X2D",
+			"sub_path": "filament/Generic PLA Silk @BBL X2D.json"
+		},
+		{
+			"name": "Generic PLA Silk @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PLA Silk @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PLA-CF @BBL X2D",
+			"sub_path": "filament/Generic PLA-CF @BBL X2D.json"
+		},
+		{
+			"name": "Generic PLA-CF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PLA-CF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PP @BBL X2D",
+			"sub_path": "filament/Generic PP @BBL X2D.json"
+		},
+		{
+			"name": "Generic PP @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PP @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PP-CF @BBL X2D",
+			"sub_path": "filament/Generic PP-CF @BBL X2D.json"
+		},
+		{
+			"name": "Generic PP-CF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PP-CF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PP-GF @BBL X2D",
+			"sub_path": "filament/Generic PP-GF @BBL X2D.json"
+		},
+		{
+			"name": "Generic PP-GF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PP-GF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PPA-CF @BBL X2D",
+			"sub_path": "filament/Bambu PPA-CF @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PPA-CF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PPA-CF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PPA-CF @BBL X2D",
+			"sub_path": "filament/Generic PPA-CF @BBL X2D.json"
+		},
+		{
+			"name": "Generic PPA-CF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PPA-CF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PPA-GF @BBL X2D",
+			"sub_path": "filament/Generic PPA-GF @BBL X2D.json"
+		},
+		{
+			"name": "Generic PPA-GF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PPA-GF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PVA @BBL X2D",
+			"sub_path": "filament/Bambu PVA @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PVA @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PVA @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PVA @BBL X2D",
+			"sub_path": "filament/Generic PVA @BBL X2D.json"
+		},
+		{
+			"name": "Generic PVA @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Generic PVA @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PVA @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PVA @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu TPU 85A @BBL X2D",
+			"sub_path": "filament/Bambu TPU 85A @BBL X2D.json"
+		},
+		{
+			"name": "Bambu TPU 85A @BBL X2D 0.8 nozzle",
+			"sub_path": "filament/Bambu TPU 85A @BBL X2D 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu TPU 90A @BBL X2D",
+			"sub_path": "filament/Bambu TPU 90A @BBL X2D.json"
+		},
+		{
+			"name": "Bambu TPU 90A @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu TPU 90A @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu TPU 90A @BBL X2D 0.8 nozzle",
+			"sub_path": "filament/Bambu TPU 90A @BBL X2D 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu TPU 95A @BBL X2D",
+			"sub_path": "filament/Bambu TPU 95A @BBL X2D.json"
+		},
+		{
+			"name": "Bambu TPU 95A @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu TPU 95A @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu TPU 95A HF @BBL X2D",
+			"sub_path": "filament/Bambu TPU 95A HF @BBL X2D.json"
+		},
+		{
+			"name": "Bambu TPU 95A HF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu TPU 95A HF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu TPU for AMS @BBL X2D",
+			"sub_path": "filament/Bambu TPU for AMS @BBL X2D.json"
+		},
+		{
+			"name": "Bambu TPU for AMS @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu TPU for AMS @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic TPU @BBL X2D",
+			"sub_path": "filament/Generic TPU @BBL X2D.json"
+		},
+		{
+			"name": "Generic TPU @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic TPU @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic TPU for AMS @BBL X2D",
+			"sub_path": "filament/Generic TPU for AMS @BBL X2D.json"
+		},
+		{
+			"name": "Generic TPU for AMS @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic TPU for AMS @BBL X2D 0.4 nozzle.json"
 		}
 	],
 	"machine_list": [
@@ -8870,6 +9666,22 @@
 		{
 			"name": "Bambu Lab H2D Pro 0.8 nozzle",
 			"sub_path": "machine/Bambu Lab H2D Pro 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu Lab X2D 0.4 nozzle",
+			"sub_path": "machine/Bambu Lab X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu Lab X2D 0.2 nozzle",
+			"sub_path": "machine/Bambu Lab X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu Lab X2D 0.6 nozzle",
+			"sub_path": "machine/Bambu Lab X2D 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu Lab X2D 0.8 nozzle",
+			"sub_path": "machine/Bambu Lab X2D 0.8 nozzle.json"
 		}
 	]
 }

resources/profiles/BBL/cli_config.json

@@ -29,7 +29,8 @@
 					"Bambu Lab H2D 0.2 nozzle",
 					"Bambu Lab H2D Pro 0.2 nozzle",
 					"Bambu Lab H2S 0.2 nozzle",
-					"Bambu Lab P2S 0.2 nozzle"
+					"Bambu Lab P2S 0.2 nozzle",
+					"Bambu Lab X2D 0.2 nozzle"
 				],
 				"Bambu Lab A1 0.4 nozzle": [
 					"Bambu Lab P1S 0.4 nozzle",
@@ -41,7 +42,8 @@
 					"Bambu Lab H2D 0.4 nozzle",
 					"Bambu Lab H2D Pro 0.4 nozzle",
 					"Bambu Lab H2S 0.4 nozzle",
-					"Bambu Lab P2S 0.4 nozzle"
+					"Bambu Lab P2S 0.4 nozzle",
+					"Bambu Lab X2D 0.4 nozzle"
 				],
 				"Bambu Lab A1 0.6 nozzle": [
 					"Bambu Lab P1S 0.6 nozzle",
@@ -53,7 +55,8 @@
 					"Bambu Lab H2D 0.6 nozzle",
 					"Bambu Lab H2D Pro 0.6 nozzle",
 					"Bambu Lab H2S 0.6 nozzle",
-					"Bambu Lab P2S 0.6 nozzle"
+					"Bambu Lab P2S 0.6 nozzle",
+					"Bambu Lab X2D 0.6 nozzle"
 				],
 				"Bambu Lab A1 0.8 nozzle": [
 					"Bambu Lab P1S 0.8 nozzle",
@@ -65,7 +68,8 @@
 					"Bambu Lab H2D 0.8 nozzle",
 					"Bambu Lab H2D Pro 0.8 nozzle",
 					"Bambu Lab H2S 0.8 nozzle",
-					"Bambu Lab P2S 0.8 nozzle"
+					"Bambu Lab P2S 0.8 nozzle",
+					"Bambu Lab X2D 0.8 nozzle"
 				]
 			}
 		},
@@ -97,7 +101,8 @@
 					"Bambu Lab H2D 0.2 nozzle",
 					"Bambu Lab H2D Pro 0.2 nozzle",
 					"Bambu Lab H2S 0.2 nozzle",
-					"Bambu Lab P2S 0.2 nozzle"
+					"Bambu Lab P2S 0.2 nozzle",
+					"Bambu Lab X2D 0.2 nozzle"
 				],
 				"Bambu Lab A1 mini 0.4 nozzle": [
 					"Bambu Lab P1S 0.4 nozzle",
@@ -108,7 +113,8 @@
 					"Bambu Lab H2D 0.4 nozzle",
 					"Bambu Lab H2D Pro 0.4 nozzle",
 					"Bambu Lab H2S 0.4 nozzle",
-					"Bambu Lab P2S 0.4 nozzle"
+					"Bambu Lab P2S 0.4 nozzle",
+					"Bambu Lab X2D 0.4 nozzle"
 				],
 				"Bambu Lab A1 mini 0.6 nozzle": [
 					"Bambu Lab P1S 0.6 nozzle",
@@ -119,7 +125,8 @@
 					"Bambu Lab H2D 0.6 nozzle",
 					"Bambu Lab H2D Pro 0.6 nozzle",
 					"Bambu Lab H2S 0.6 nozzle",
-					"Bambu Lab P2S 0.6 nozzle"
+					"Bambu Lab P2S 0.6 nozzle",
+					"Bambu Lab X2D 0.6 nozzle"
 				],
 				"Bambu Lab A1 mini 0.8 nozzle": [
 					"Bambu Lab P1S 0.8 nozzle",
@@ -130,7 +137,8 @@
 					"Bambu Lab H2D 0.8 nozzle",
 					"Bambu Lab H2D Pro 0.8 nozzle",
 					"Bambu Lab H2S 0.8 nozzle",
-					"Bambu Lab P2S 0.8 nozzle"
+					"Bambu Lab P2S 0.8 nozzle",
+					"Bambu Lab X2D 0.8 nozzle"
 				]
 			}
 		},
@@ -142,7 +150,8 @@
 					"Bambu Lab H2D 0.2 nozzle",
 					"Bambu Lab H2D Pro 0.2 nozzle",
 					"Bambu Lab H2S 0.2 nozzle",
-					"Bambu Lab P2S 0.2 nozzle"
+					"Bambu Lab P2S 0.2 nozzle",
+					"Bambu Lab X2D 0.2 nozzle"
 				],
 				"Bambu Lab X1 0.4 nozzle": [
 					"Bambu Lab A1 mini 0.4 nozzle",
@@ -150,7 +159,8 @@
 					"Bambu Lab H2D 0.4 nozzle",
 					"Bambu Lab H2D Pro 0.4 nozzle",
 					"Bambu Lab H2S 0.4 nozzle",
-					"Bambu Lab P2S 0.4 nozzle"
+					"Bambu Lab P2S 0.4 nozzle",
+					"Bambu Lab X2D 0.4 nozzle"
 				],
 				"Bambu Lab X1 0.6 nozzle": [
 					"Bambu Lab A1 mini 0.6 nozzle",
@@ -158,7 +168,8 @@
 					"Bambu Lab H2D 0.6 nozzle",
 					"Bambu Lab H2D Pro 0.6 nozzle",
 					"Bambu Lab H2S 0.6 nozzle",
-					"Bambu Lab P2S 0.6 nozzle"
+					"Bambu Lab P2S 0.6 nozzle",
+					"Bambu Lab X2D 0.6 nozzle"
 				],
 				"Bambu Lab X1 0.8 nozzle": [
 					"Bambu Lab A1 mini 0.8 nozzle",
@@ -166,7 +177,8 @@
 					"Bambu Lab H2D 0.8 nozzle",
 					"Bambu Lab H2D Pro 0.8 nozzle",
 					"Bambu Lab H2S 0.8 nozzle",
-					"Bambu Lab P2S 0.8 nozzle"
+					"Bambu Lab P2S 0.8 nozzle",
+					"Bambu Lab X2D 0.8 nozzle"
 				]
 			}
 		},
@@ -178,7 +190,8 @@
 					"Bambu Lab H2D 0.2 nozzle",
 					"Bambu Lab H2D Pro 0.2 nozzle",
 					"Bambu Lab H2S 0.2 nozzle",
-					"Bambu Lab P2S 0.2 nozzle"
+					"Bambu Lab P2S 0.2 nozzle",
+					"Bambu Lab X2D 0.2 nozzle"
 				],
 				"Bambu Lab X1 Carbon 0.4 nozzle": [
 					"Bambu Lab A1 mini 0.4 nozzle",
@@ -186,7 +199,8 @@
 					"Bambu Lab H2D 0.4 nozzle",
 					"Bambu Lab H2D Pro 0.4 nozzle",
 					"Bambu Lab H2S 0.4 nozzle",
-					"Bambu Lab P2S 0.4 nozzle"
+					"Bambu Lab P2S 0.4 nozzle",
+					"Bambu Lab X2D 0.4 nozzle"
 				],
 				"Bambu Lab X1 Carbon 0.6 nozzle": [
 					"Bambu Lab A1 mini 0.6 nozzle",
@@ -194,7 +208,8 @@
 					"Bambu Lab H2D 0.6 nozzle",
 					"Bambu Lab H2D Pro 0.6 nozzle",
 					"Bambu Lab H2S 0.6 nozzle",
-					"Bambu Lab P2S 0.6 nozzle"
+					"Bambu Lab P2S 0.6 nozzle",
+					"Bambu Lab X2D 0.6 nozzle"
 				],
 				"Bambu Lab X1 Carbon 0.8 nozzle": [
 					"Bambu Lab A1 mini 0.8 nozzle",
@@ -202,7 +217,8 @@
 					"Bambu Lab H2D 0.8 nozzle",
 					"Bambu Lab H2D Pro 0.8 nozzle",
 					"Bambu Lab H2S 0.8 nozzle",
-					"Bambu Lab P2S 0.8 nozzle"
+					"Bambu Lab P2S 0.8 nozzle",
+					"Bambu Lab X2D 0.8 nozzle"
 				]
 			}
 		},
@@ -214,7 +230,8 @@
 					"Bambu Lab H2D 0.2 nozzle",
 					"Bambu Lab H2D Pro 0.2 nozzle",
 					"Bambu Lab H2S 0.2 nozzle",
-					"Bambu Lab P2S 0.2 nozzle"
+					"Bambu Lab P2S 0.2 nozzle",
+					"Bambu Lab X2D 0.2 nozzle"
 				],
 				"Bambu Lab X1E 0.4 nozzle": [
 					"Bambu Lab A1 mini 0.4 nozzle",
@@ -222,7 +239,8 @@
 					"Bambu Lab H2D 0.4 nozzle",
 					"Bambu Lab H2D Pro 0.4 nozzle",
 					"Bambu Lab H2S 0.4 nozzle",
-					"Bambu Lab P2S 0.4 nozzle"
+					"Bambu Lab P2S 0.4 nozzle",
+					"Bambu Lab X2D 0.4 nozzle"
 				],
 				"Bambu Lab X1E 0.6 nozzle": [
 					"Bambu Lab A1 mini 0.6 nozzle",
@@ -230,7 +248,8 @@
 					"Bambu Lab H2D 0.6 nozzle",
 					"Bambu Lab H2D Pro 0.6 nozzle",
 					"Bambu Lab H2S 0.6 nozzle",
-					"Bambu Lab P2S 0.6 nozzle"
+					"Bambu Lab P2S 0.6 nozzle",
+					"Bambu Lab X2D 0.6 nozzle"
 				],
 				"Bambu Lab X1E 0.8 nozzle": [
 					"Bambu Lab A1 mini 0.8 nozzle",
@@ -238,7 +257,8 @@
 					"Bambu Lab H2D 0.8 nozzle",
 					"Bambu Lab H2D Pro 0.8 nozzle",
 					"Bambu Lab H2S 0.8 nozzle",
-					"Bambu Lab P2S 0.8 nozzle"
+					"Bambu Lab P2S 0.8 nozzle",
+					"Bambu Lab X2D 0.8 nozzle"
 				]
 			}
 		},
@@ -250,7 +270,8 @@
 					"Bambu Lab H2D 0.2 nozzle",
 					"Bambu Lab H2D Pro 0.2 nozzle",
 					"Bambu Lab H2S 0.2 nozzle",
-					"Bambu Lab P2S 0.2 nozzle"
+					"Bambu Lab P2S 0.2 nozzle",
+					"Bambu Lab X2D 0.2 nozzle"
 				],
 				"Bambu Lab P1P 0.4 nozzle": [
 					"Bambu Lab A1 mini 0.4 nozzle",
@@ -258,7 +279,8 @@
 					"Bambu Lab H2D 0.4 nozzle",
 					"Bambu Lab H2D Pro 0.4 nozzle",
 					"Bambu Lab H2S 0.4 nozzle",
-					"Bambu Lab P2S 0.4 nozzle"
+					"Bambu Lab P2S 0.4 nozzle",
+					"Bambu Lab X2D 0.4 nozzle"
 				],
 				"Bambu Lab P1P 0.6 nozzle": [
 					"Bambu Lab A1 mini 0.6 nozzle",
@@ -266,7 +288,8 @@
 					"Bambu Lab H2D 0.6 nozzle",
 					"Bambu Lab H2D Pro 0.6 nozzle",
 					"Bambu Lab H2S 0.6 nozzle",
-					"Bambu Lab P2S 0.6 nozzle"
+					"Bambu Lab P2S 0.6 nozzle",
+					"Bambu Lab X2D 0.6 nozzle"
 				],
 				"Bambu Lab P1P 0.8 nozzle": [
 					"Bambu Lab A1 mini 0.8 nozzle",
@@ -274,7 +297,8 @@
 					"Bambu Lab H2D 0.8 nozzle",
 					"Bambu Lab H2D Pro 0.8 nozzle",
 					"Bambu Lab H2S 0.8 nozzle",
-					"Bambu Lab P2S 0.8 nozzle"
+					"Bambu Lab P2S 0.8 nozzle",
+					"Bambu Lab X2D 0.8 nozzle"
 				]
 			}
 		},
@@ -286,7 +310,8 @@
 					"Bambu Lab H2D 0.2 nozzle",
 					"Bambu Lab H2D Pro 0.2 nozzle",
 					"Bambu Lab H2S 0.2 nozzle",
-					"Bambu Lab P2S 0.2 nozzle"
+					"Bambu Lab P2S 0.2 nozzle",
+					"Bambu Lab X2D 0.2 nozzle"
 				],
 				"Bambu Lab P1S 0.4 nozzle": [
 					"Bambu Lab A1 mini 0.4 nozzle",
@@ -294,7 +319,8 @@
 					"Bambu Lab H2D 0.4 nozzle",
 					"Bambu Lab H2D Pro 0.4 nozzle",
 					"Bambu Lab H2S 0.4 nozzle",
-					"Bambu Lab P2S 0.4 nozzle"
+					"Bambu Lab P2S 0.4 nozzle",
+					"Bambu Lab X2D 0.4 nozzle"
 				],
 				"Bambu Lab P1S 0.6 nozzle": [
 					"Bambu Lab A1 mini 0.6 nozzle",
@@ -302,7 +328,8 @@
 					"Bambu Lab H2D 0.6 nozzle",
 					"Bambu Lab H2D Pro 0.6 nozzle",
 					"Bambu Lab H2S 0.6 nozzle",
-					"Bambu Lab P2S 0.6 nozzle"
+					"Bambu Lab P2S 0.6 nozzle",
+					"Bambu Lab X2D 0.6 nozzle"
 				],
 				"Bambu Lab P1S 0.8 nozzle": [
 					"Bambu Lab A1 mini 0.8 nozzle",
@@ -310,7 +337,8 @@
 					"Bambu Lab H2D 0.8 nozzle",
 					"Bambu Lab H2D Pro 0.8 nozzle",
 					"Bambu Lab H2S 0.8 nozzle",
-					"Bambu Lab P2S 0.8 nozzle"
+					"Bambu Lab P2S 0.8 nozzle",
+					"Bambu Lab X2D 0.8 nozzle"
 				]
 			}
 		},
@@ -325,7 +353,8 @@
 					"Bambu Lab A1 0.2 nozzle",
 					"Bambu Lab A1 mini 0.2 nozzle",
 					"Bambu Lab H2S 0.2 nozzle",
-					"Bambu Lab P2S 0.2 nozzle"
+					"Bambu Lab P2S 0.2 nozzle",
+					"Bambu Lab X2D 0.2 nozzle"
 				],
 				"Bambu Lab H2D 0.4 nozzle": [
 					"Bambu Lab P1S 0.4 nozzle",
@@ -336,7 +365,8 @@
 					"Bambu Lab A1 0.4 nozzle",
 					"Bambu Lab A1 mini 0.4 nozzle",
 					"Bambu Lab H2S 0.4 nozzle",
-					"Bambu Lab P2S 0.4 nozzle"
+					"Bambu Lab P2S 0.4 nozzle",
+					"Bambu Lab X2D 0.4 nozzle"
 				],
 				"Bambu Lab H2D 0.6 nozzle": [
 					"Bambu Lab P1S 0.6 nozzle",
@@ -347,7 +377,8 @@
 					"Bambu Lab A1 0.6 nozzle",
 					"Bambu Lab A1 mini 0.6 nozzle",
 					"Bambu Lab H2S 0.6 nozzle",
-					"Bambu Lab P2S 0.6 nozzle"
+					"Bambu Lab P2S 0.6 nozzle",
+					"Bambu Lab X2D 0.6 nozzle"
 				],
 				"Bambu Lab H2D 0.8 nozzle": [
 					"Bambu Lab P1S 0.8 nozzle",
@@ -358,7 +389,8 @@
 					"Bambu Lab A1 0.8 nozzle",
 					"Bambu Lab A1 mini 0.8 nozzle",
 					"Bambu Lab H2S 0.8 nozzle",
-					"Bambu Lab P2S 0.8 nozzle"
+					"Bambu Lab P2S 0.8 nozzle",
+					"Bambu Lab X2D 0.8 nozzle"
 				]
 			}
 		},
@@ -373,7 +405,8 @@
 					"Bambu Lab A1 0.2 nozzle",
 					"Bambu Lab A1 mini 0.2 nozzle",
 					"Bambu Lab H2S 0.2 nozzle",
-					"Bambu Lab P2S 0.2 nozzle"
+					"Bambu Lab P2S 0.2 nozzle",
+					"Bambu Lab X2D 0.2 nozzle"
 				],
 				"Bambu Lab H2D Pro 0.4 nozzle": [
 					"Bambu Lab P1S 0.4 nozzle",
@@ -384,7 +417,8 @@
 					"Bambu Lab A1 0.4 nozzle",
 					"Bambu Lab A1 mini 0.4 nozzle",
 					"Bambu Lab H2S 0.4 nozzle",
-					"Bambu Lab P2S 0.4 nozzle"
+					"Bambu Lab P2S 0.4 nozzle",
+					"Bambu Lab X2D 0.4 nozzle"
 				],
 				"Bambu Lab H2D Pro 0.6 nozzle": [
 					"Bambu Lab P1S 0.6 nozzle",
@@ -395,7 +429,8 @@
 					"Bambu Lab A1 0.6 nozzle",
 					"Bambu Lab A1 mini 0.6 nozzle",
 					"Bambu Lab H2S 0.6 nozzle",
-					"Bambu Lab P2S 0.6 nozzle"
+					"Bambu Lab P2S 0.6 nozzle",
+					"Bambu Lab X2D 0.6 nozzle"
 				],
 				"Bambu Lab H2D Pro 0.8 nozzle": [
 					"Bambu Lab P1S 0.8 nozzle",
@@ -406,7 +441,8 @@
 					"Bambu Lab A1 0.8 nozzle",
 					"Bambu Lab A1 mini 0.8 nozzle",
 					"Bambu Lab H2S 0.8 nozzle",
-					"Bambu Lab P2S 0.8 nozzle"
+					"Bambu Lab P2S 0.8 nozzle",
+					"Bambu Lab X2D 0.8 nozzle"
 				]
 			}
 		},
@@ -422,7 +458,8 @@
 					"Bambu Lab X1 0.2 nozzle",
 					"Bambu Lab X1 Carbon 0.2 nozzle",
 					"Bambu Lab X1E 0.2 nozzle",
-					"Bambu Lab P2S 0.2 nozzle"
+					"Bambu Lab P2S 0.2 nozzle",
+					"Bambu Lab X2D 0.2 nozzle"
 				],
 				"Bambu Lab H2S 0.4 nozzle": [
 					"Bambu Lab A1 0.4 nozzle",
@@ -434,7 +471,8 @@
 					"Bambu Lab X1 0.4 nozzle",
 					"Bambu Lab X1 Carbon 0.4 nozzle",
 					"Bambu Lab X1E 0.4 nozzle",
-					"Bambu Lab P2S 0.4 nozzle"
+					"Bambu Lab P2S 0.4 nozzle",
+					"Bambu Lab X2D 0.4 nozzle"
 				],
 				"Bambu Lab H2S 0.6 nozzle": [
 					"Bambu Lab A1 0.6 nozzle",
@@ -446,7 +484,8 @@
 					"Bambu Lab X1 0.6 nozzle",
 					"Bambu Lab X1 Carbon 0.6 nozzle",
 					"Bambu Lab X1E 0.6 nozzle",
-					"Bambu Lab P2S 0.6 nozzle"
+					"Bambu Lab P2S 0.6 nozzle",
+					"Bambu Lab X2D 0.6 nozzle"
 				],
 				"Bambu Lab H2S 0.8 nozzle": [
 					"Bambu Lab A1 0.8 nozzle",
@@ -458,7 +497,8 @@
 					"Bambu Lab X1 0.8 nozzle",
 					"Bambu Lab X1 Carbon 0.8 nozzle",
 					"Bambu Lab X1E 0.8 nozzle",
-					"Bambu Lab P2S 0.8 nozzle"
+					"Bambu Lab P2S 0.8 nozzle",
+					"Bambu Lab X2D 0.8 nozzle"
 				]
 			}
 		},
@@ -474,7 +514,8 @@
 					"Bambu Lab P1S 0.2 nozzle",
 					"Bambu Lab X1 0.2 nozzle",
 					"Bambu Lab X1 Carbon 0.2 nozzle",
-					"Bambu Lab X1E 0.2 nozzle"
+					"Bambu Lab X1E 0.2 nozzle",
+					"Bambu Lab X2D 0.2 nozzle"
 				],
 				"Bambu Lab P2S 0.4 nozzle": [
 					"Bambu Lab A1 0.4 nozzle",
@@ -486,7 +527,8 @@
 					"Bambu Lab P1S 0.4 nozzle",
 					"Bambu Lab X1 0.4 nozzle",
 					"Bambu Lab X1 Carbon 0.4 nozzle",
-					"Bambu Lab X1E 0.4 nozzle"
+					"Bambu Lab X1E 0.4 nozzle",
+					"Bambu Lab X2D 0.4 nozzle"
 				],
 				"Bambu Lab P2S 0.6 nozzle": [
 					"Bambu Lab A1 0.6 nozzle",
@@ -498,7 +540,8 @@
 					"Bambu Lab P1S 0.6 nozzle",
 					"Bambu Lab X1 0.6 nozzle",
 					"Bambu Lab X1 Carbon 0.6 nozzle",
-					"Bambu Lab X1E 0.6 nozzle"
+					"Bambu Lab X1E 0.6 nozzle",
+					"Bambu Lab X2D 0.6 nozzle"
 				],
 				"Bambu Lab P2S 0.8 nozzle": [
 					"Bambu Lab A1 0.8 nozzle",
@@ -510,7 +553,68 @@
 					"Bambu Lab P1S 0.8 nozzle",
 					"Bambu Lab X1 0.8 nozzle",
 					"Bambu Lab X1 Carbon 0.8 nozzle",
-					"Bambu Lab X1E 0.8 nozzle"
+					"Bambu Lab X1E 0.8 nozzle",
+					"Bambu Lab X2D 0.8 nozzle"
+				]
+			}
+		},
+		"Bambu Lab X2D": {
+			"downward_check": {
+				"Bambu Lab X2D 0.2 nozzle": [
+					"Bambu Lab A1 0.2 nozzle",
+					"Bambu Lab A1 mini 0.2 nozzle",
+					"Bambu Lab X1 0.2 nozzle",
+					"Bambu Lab X1 Carbon 0.2 nozzle",
+					"Bambu Lab X1E 0.2 nozzle",
+					"Bambu Lab P1P 0.2 nozzle",
+					"Bambu Lab P1S 0.2 nozzle",
+					"Bambu Lab H2D 0.2 nozzle",
+					"Bambu Lab H2D Pro 0.2 nozzle",
+					"Bambu Lab H2S 0.2 nozzle",
+					"Bambu Lab P2S 0.2 nozzle",
+					"Bambu Lab H2C 0.2 nozzle"
+				],
+				"Bambu Lab X2D 0.4 nozzle": [
+					"Bambu Lab A1 0.4 nozzle",
+					"Bambu Lab A1 mini 0.4 nozzle",
+					"Bambu Lab X1 0.4 nozzle",
+					"Bambu Lab X1 Carbon 0.4 nozzle",
+					"Bambu Lab X1E 0.4 nozzle",
+					"Bambu Lab P1P 0.4 nozzle",
+					"Bambu Lab P1S 0.4 nozzle",
+					"Bambu Lab H2D 0.4 nozzle",
+					"Bambu Lab H2D Pro 0.4 nozzle",
+					"Bambu Lab H2S 0.4 nozzle",
+					"Bambu Lab P2S 0.4 nozzle",
+					"Bambu Lab H2C 0.4 nozzle"
+				],
+				"Bambu Lab X2D 0.6 nozzle": [
+					"Bambu Lab A1 0.6 nozzle",
+					"Bambu Lab A1 mini 0.6 nozzle",
+					"Bambu Lab X1 0.6 nozzle",
+					"Bambu Lab X1 Carbon 0.6 nozzle",
+					"Bambu Lab X1E 0.6 nozzle",
+					"Bambu Lab P1P 0.6 nozzle",
+					"Bambu Lab P1S 0.6 nozzle",
+					"Bambu Lab H2D 0.6 nozzle",
+					"Bambu Lab H2D Pro 0.6 nozzle",
+					"Bambu Lab H2S 0.6 nozzle",
+					"Bambu Lab P2S 0.6 nozzle",
+					"Bambu Lab H2C 0.6 nozzle"
+				],
+				"Bambu Lab X2D 0.8 nozzle": [
+					"Bambu Lab A1 0.8 nozzle",
+					"Bambu Lab A1 mini 0.8 nozzle",
+					"Bambu Lab X1 0.8 nozzle",
+					"Bambu Lab X1 Carbon 0.8 nozzle",
+					"Bambu Lab X1E 0.8 nozzle",
+					"Bambu Lab P1P 0.8 nozzle",
+					"Bambu Lab P1S 0.8 nozzle",
+					"Bambu Lab H2D 0.8 nozzle",
+					"Bambu Lab H2D Pro 0.8 nozzle",
+					"Bambu Lab H2S 0.8 nozzle",
+					"Bambu Lab P2S 0.8 nozzle",
+					"Bambu Lab H2C 0.8 nozzle"
 				]
 			}
 		}

resources/profiles/BBL/filament/AliZ/AliZ PA-CF @P1-X1.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "AliZPX1FSA04",
 	"name": "AliZ PA-CF @P1-X1",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "AliZ PA-CF @base",
+	"from": "system",
+	"setting_id": "AliZPX1FSA04",
+	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"
 	],

resources/profiles/BBL/filament/AliZ/AliZ PETG @P1-X1.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "AliZPX1FSA04",
 	"name": "AliZ PETG @P1-X1",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "AliZ PETG @base",
+	"from": "system",
+	"setting_id": "AliZPX1FSA04",
+	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"
 	],

resources/profiles/BBL/filament/AliZ/AliZ PETG-CF @P1-X1.json

@@ -4,13 +4,13 @@
 	"inherits": "AliZ PETG-CF @base",
 	"from": "system",
 	"setting_id": "AliZPX1FSG50",
+	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"
 	],
 	"pressure_advance": [
 		"0.026"
 	],
-	"instantiation": "true",
 	"compatible_printers": [
 		"Bambu Lab X1 Carbon 0.4 nozzle",
 		"Bambu Lab X1 0.4 nozzle",

resources/profiles/BBL/filament/AliZ/AliZ PLA @P1-X1.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "AliZPX1FSA04",
 	"name": "AliZ PLA @P1-X1",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "AliZ PLA @base",
+	"from": "system",
+	"setting_id": "AliZPX1FSA04",
+	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"
 	],

resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.2 nozzle.json

@@ -0,0 +1,299 @@
+{
+	"type": "filament",
+	"name": "Bambu ABS @BBL X2D 0.2 nozzle",
+	"inherits": "Bambu ABS @base",
+	"from": "system",
+	"setting_id": "GFSB00_20",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"3",
+		"3",
+		"3",
+		"3"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"65"
+	],
+	"counter_coef_2": [
+		"0.0124"
+	],
+	"counter_coef_3": [
+		"0.0241"
+	],
+	"counter_limit_max": [
+		"0.3341"
+	],
+	"counter_limit_min": [
+		"0.0241"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"2",
+		"2",
+		"2",
+		"2"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"270"
+	],
+	"hole_coef_2": [
+		"-0.0008"
+	],
+	"hole_coef_3": [
+		"0.1319"
+	],
+	"hole_limit_max": [
+		"0.1319"
+	],
+	"hole_limit_min": [
+		"0.1119"
+	],
+	"nozzle_temperature": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260",
+		"260",
+		"260",
+		"260"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.2 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.4 nozzle.json

@@ -0,0 +1,299 @@
+{
+	"type": "filament",
+	"name": "Bambu ABS @BBL X2D 0.4 nozzle",
+	"inherits": "Bambu ABS @base",
+	"from": "system",
+	"setting_id": "GFSB00_09",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"0.4",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"Spiral Lift",
+		"Spiral Lift",
+		"Spiral Lift"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"65"
+	],
+	"counter_coef_2": [
+		"0.0124"
+	],
+	"counter_coef_3": [
+		"0.0241"
+	],
+	"counter_limit_max": [
+		"0.3341"
+	],
+	"counter_limit_min": [
+		"0.0241"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"16",
+		"25",
+		"16",
+		"18"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"270"
+	],
+	"hole_coef_2": [
+		"-0.0008"
+	],
+	"hole_coef_3": [
+		"0.1319"
+	],
+	"hole_limit_max": [
+		"0.1319"
+	],
+	"hole_limit_min": [
+		"0.1119"
+	],
+	"nozzle_temperature": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260",
+		"260",
+		"260",
+		"260"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.4 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.8 nozzle.json

@@ -0,0 +1,299 @@
+{
+	"type": "filament",
+	"name": "Bambu ABS @BBL X2D 0.8 nozzle",
+	"inherits": "Bambu ABS @base",
+	"from": "system",
+	"setting_id": "GFSB00_30",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"65"
+	],
+	"counter_coef_2": [
+		"0.0124"
+	],
+	"counter_coef_3": [
+		"0.0241"
+	],
+	"counter_limit_max": [
+		"0.3341"
+	],
+	"counter_limit_min": [
+		"0.0241"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"16",
+		"35",
+		"16",
+		"16"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"270"
+	],
+	"hole_coef_2": [
+		"-0.0008"
+	],
+	"hole_coef_3": [
+		"0.1319"
+	],
+	"hole_limit_max": [
+		"0.1319"
+	],
+	"hole_limit_min": [
+		"0.1119"
+	],
+	"nozzle_temperature": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260",
+		"260",
+		"260",
+		"260"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL X2D.json

@@ -0,0 +1,299 @@
+{
+	"type": "filament",
+	"name": "Bambu ABS @BBL X2D",
+	"inherits": "Bambu ABS @base",
+	"from": "system",
+	"setting_id": "GFSB00_19",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"65"
+	],
+	"counter_coef_2": [
+		"0.0124"
+	],
+	"counter_coef_3": [
+		"0.0241"
+	],
+	"counter_limit_max": [
+		"0.3341"
+	],
+	"counter_limit_min": [
+		"0.0241"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"16",
+		"35",
+		"16",
+		"16"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"270"
+	],
+	"hole_coef_2": [
+		"-0.0008"
+	],
+	"hole_coef_3": [
+		"0.1319"
+	],
+	"hole_limit_max": [
+		"0.1319"
+	],
+	"hole_limit_min": [
+		"0.1119"
+	],
+	"nozzle_temperature": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260",
+		"260",
+		"260",
+		"260"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.6 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu ABS-GF @BBL X2D 0.4 nozzle.json

@@ -0,0 +1,266 @@
+{
+	"type": "filament",
+	"name": "Bambu ABS-GF @BBL X2D 0.4 nozzle",
+	"inherits": "Bambu ABS-GF @base",
+	"from": "system",
+	"setting_id": "GFSB50_06",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"1",
+		"1",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"60"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"12",
+		"12",
+		"12",
+		"12"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"270"
+	],
+	"nozzle_temperature": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260",
+		"260",
+		"260",
+		"260"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.4 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu ABS-GF @BBL X2D.json

@@ -0,0 +1,267 @@
+{
+	"type": "filament",
+	"name": "Bambu ABS-GF @BBL X2D",
+	"inherits": "Bambu ABS-GF @base",
+	"from": "system",
+	"setting_id": "GFSB50_07",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"1",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"60"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"12",
+		"12",
+		"12",
+		"12"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"270"
+	],
+	"nozzle_temperature": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260",
+		"260",
+		"260",
+		"260"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu ASA @BBL X2D 0.2 nozzle.json

@@ -0,0 +1,293 @@
+{
+	"type": "filament",
+	"name": "Bambu ASA @BBL X2D 0.2 nozzle",
+	"inherits": "Bambu ASA @base",
+	"from": "system",
+	"setting_id": "GFSB01_21",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"3",
+		"3",
+		"3",
+		"3"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"65"
+	],
+	"counter_coef_2": [
+		"0.0094"
+	],
+	"counter_coef_3": [
+		"-0.0092"
+	],
+	"counter_limit_max": [
+		"0.2258"
+	],
+	"counter_limit_min": [
+		"-0.0092"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"2",
+		"2",
+		"2",
+		"2"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"270"
+	],
+	"hole_coef_2": [
+		"0.0013"
+	],
+	"hole_coef_3": [
+		"0.1261"
+	],
+	"hole_limit_max": [
+		"0.1586"
+	],
+	"hole_limit_min": [
+		"0.1261"
+	],
+	"nozzle_temperature": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.2 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu ASA @BBL X2D 0.4 nozzle.json

@@ -0,0 +1,293 @@
+{
+	"type": "filament",
+	"name": "Bambu ASA @BBL X2D 0.4 nozzle",
+	"inherits": "Bambu ASA @base",
+	"from": "system",
+	"setting_id": "GFSB01_22",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"0.4",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"Spiral Lift",
+		"Spiral Lift",
+		"Spiral Lift"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"65"
+	],
+	"counter_coef_2": [
+		"0.0094"
+	],
+	"counter_coef_3": [
+		"-0.0092"
+	],
+	"counter_limit_max": [
+		"0.2258"
+	],
+	"counter_limit_min": [
+		"-0.0092"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"18",
+		"25",
+		"18",
+		"20"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"270"
+	],
+	"hole_coef_2": [
+		"0.0013"
+	],
+	"hole_coef_3": [
+		"0.1261"
+	],
+	"hole_limit_max": [
+		"0.1586"
+	],
+	"hole_limit_min": [
+		"0.1261"
+	],
+	"nozzle_temperature": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.4 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu ASA @BBL X2D.json

@@ -0,0 +1,297 @@
+{
+	"type": "filament",
+	"name": "Bambu ASA @BBL X2D",
+	"inherits": "Bambu ASA @base",
+	"from": "system",
+	"setting_id": "GFSB01_20",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"65"
+	],
+	"counter_coef_2": [
+		"0.0094"
+	],
+	"counter_coef_3": [
+		"-0.0092"
+	],
+	"counter_limit_max": [
+		"0.2258"
+	],
+	"counter_limit_min": [
+		"-0.0092"
+	],
+	"fan_min_speed": [
+		"25"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"18",
+		"35",
+		"18",
+		"18"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"270"
+	],
+	"hole_coef_2": [
+		"0.0013"
+	],
+	"hole_coef_3": [
+		"0.1261"
+	],
+	"hole_limit_max": [
+		"0.1586"
+	],
+	"hole_limit_min": [
+		"0.1261"
+	],
+	"nozzle_temperature": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}