Extend Prusa's tip forming to the MK4 MMU3 and CORE One INDX

Match PrusaSlicer's tip forming on CORE One filaments
Ramming, load/unload, cooling-move and stamping values follow the PrusaSlicer 3.0 presets, which retune several of them relative to 2.9.6. The CORE One MMU3 0.6 nozzle now uses the 0.6 Generic PLA and Prusament rPLA profiles, as in PrusaSlicer.
2026-10-06 15:21:09 +00:00 · 2026-10-06 18:25:06 +08:00 · 2026-10-06 18:02:32 +08:00
67 changed files with 555 additions and 51 deletions
@@ -36,8 +36,13 @@ override is not available in these profiles. The source's `EXCLUDE_E_START` and
 `EXCLUDE_E_END` internal markers become comments rather than printer commands.

 Pressure-advance restoration and automatic pressure-advance emission use the
-selected filament preset's settings. These profiles do not impose machine-owned
-filament overrides. Dock-fan control retains the source's material and layer
+selected filament preset's settings. The INDX filament presets include
+`fdm_filament_template_indx`, whose start G-code sets the filament's pressure
+advance with `M572` and then starts the firmware's automatic calibration with
+`M573 R`, the commands PrusaSlicer emits after a tool change; the station purge
+disables pressure advance before it. The template also carries Prusa's
+multi-tool ramming and a 10 mm³ minimal purge. These profiles do not impose
+machine-owned filament overrides. Dock-fan control retains the source's material and layer
 conditions; shutdown parks the tool and turns off the used heaters and dock fan.

 ## Configuration boundaries
@@ -1,6 +1,6 @@
 {
 	"name": "Prusa",
-	"version": "02.04.00.15",
+	"version": "02.04.00.16",
 	"force_update": "0",
 	"description": "Prusa configurations",
 	"machine_model_list": [
@@ -1573,48 +1573,32 @@
 	],
 	"filament_list": [
 		{
-			"name": "Generic ASA @Prusa CORE One",
-			"sub_path": "filament/Generic ASA @Prusa CORE One.json"
-		},
-		{
-			"name": "Generic PLA Silk @Prusa CORE One",
-			"sub_path": "filament/Generic PLA Silk @Prusa CORE One.json"
+			"name": "Generic PC @Prusa",
+			"sub_path": "filament/Generic PC @Prusa.json"
 		},
 		{
 			"name": "fdm_filament_common",
 			"sub_path": "filament/fdm_filament_common.json"
 		},
 		{
-			"name": "Generic ASA @Prusa CORE One 0.6",
-			"sub_path": "filament/Generic ASA @Prusa CORE One 0.6.json"
+			"name": "fdm_filament_template_indx",
+			"sub_path": "filament/fdm_filament_template_indx.json"
 		},
 		{
-			"name": "Generic ASA @Prusa CORE One 0.8",
-			"sub_path": "filament/Generic ASA @Prusa CORE One 0.8.json"
+			"name": "fdm_filament_template_nextruder_pet",
+			"sub_path": "filament/fdm_filament_template_nextruder_pet.json"
 		},
 		{
-			"name": "Generic ASA @Prusa CORE One HF 0.4",
-			"sub_path": "filament/Generic ASA @Prusa CORE One HF 0.4.json"
+			"name": "fdm_filament_template_nextruder_pet_hf",
+			"sub_path": "filament/fdm_filament_template_nextruder_pet_hf.json"
 		},
 		{
-			"name": "Generic ASA @Prusa CORE One HF 0.5",
-			"sub_path": "filament/Generic ASA @Prusa CORE One HF 0.5.json"
+			"name": "fdm_filament_template_nextruder_pla",
+			"sub_path": "filament/fdm_filament_template_nextruder_pla.json"
 		},
 		{
-			"name": "Generic ASA @Prusa CORE One HF 0.6",
-			"sub_path": "filament/Generic ASA @Prusa CORE One HF 0.6.json"
-		},
-		{
-			"name": "Generic ASA @Prusa CORE One HF 0.8",
-			"sub_path": "filament/Generic ASA @Prusa CORE One HF 0.8.json"
-		},
-		{
-			"name": "Generic PLA Silk @Prusa CORE One 0.6",
-			"sub_path": "filament/Generic PLA Silk @Prusa CORE One 0.6.json"
-		},
-		{
-			"name": "Generic PLA Silk @Prusa CORE One 0.8",
-			"sub_path": "filament/Generic PLA Silk @Prusa CORE One 0.8.json"
+			"name": "fdm_filament_template_nextruder_pla_hf",
+			"sub_path": "filament/fdm_filament_template_nextruder_pla_hf.json"
 		},
 		{
 			"name": "fdm_filament_abs",
@@ -1664,6 +1648,22 @@
 			"name": "fdm_filament_tpu",
 			"sub_path": "filament/fdm_filament_tpu.json"
 		},
+		{
+			"name": "Generic PLA Silk @Prusa CORE One INDX",
+			"sub_path": "filament/Generic PLA Silk @Prusa CORE One INDX.json"
+		},
+		{
+			"name": "Generic ASA @Prusa CORE One",
+			"sub_path": "filament/Generic ASA @Prusa CORE One.json"
+		},
+		{
+			"name": "Generic PC @Prusa MK4 MMU3",
+			"sub_path": "filament/Generic PC @Prusa MK4 MMU3.json"
+		},
+		{
+			"name": "Generic PLA Silk @Prusa CORE One",
+			"sub_path": "filament/Generic PLA Silk @Prusa CORE One.json"
+		},
 		{
 			"name": "Generic ABS @Prusa MK3.5",
 			"sub_path": "filament/Generic ABS @Prusa MK3.5.json"
@@ -2160,6 +2160,38 @@
 			"name": "Generic TPU HF @Prusa MK3.5",
 			"sub_path": "filament/Generic TPU HF @Prusa MK3.5.json"
 		},
+		{
+			"name": "Generic ASA @Prusa CORE One 0.6",
+			"sub_path": "filament/Generic ASA @Prusa CORE One 0.6.json"
+		},
+		{
+			"name": "Generic ASA @Prusa CORE One 0.8",
+			"sub_path": "filament/Generic ASA @Prusa CORE One 0.8.json"
+		},
+		{
+			"name": "Generic ASA @Prusa CORE One HF 0.4",
+			"sub_path": "filament/Generic ASA @Prusa CORE One HF 0.4.json"
+		},
+		{
+			"name": "Generic ASA @Prusa CORE One HF 0.5",
+			"sub_path": "filament/Generic ASA @Prusa CORE One HF 0.5.json"
+		},
+		{
+			"name": "Generic ASA @Prusa CORE One HF 0.6",
+			"sub_path": "filament/Generic ASA @Prusa CORE One HF 0.6.json"
+		},
+		{
+			"name": "Generic ASA @Prusa CORE One HF 0.8",
+			"sub_path": "filament/Generic ASA @Prusa CORE One HF 0.8.json"
+		},
+		{
+			"name": "Generic PLA Silk @Prusa CORE One 0.6",
+			"sub_path": "filament/Generic PLA Silk @Prusa CORE One 0.6.json"
+		},
+		{
+			"name": "Generic PLA Silk @Prusa CORE One 0.8",
+			"sub_path": "filament/Generic PLA Silk @Prusa CORE One 0.8.json"
+		},
 		{
 			"name": "Generic ABS @Prusa MK4S HF0.4",
 			"sub_path": "filament/Generic ABS @Prusa MK4S HF0.4.json"
@@ -2212,6 +2244,10 @@
 			"name": "Generic ABS HF @Prusa MINIIS 0.8",
 			"sub_path": "filament/Generic ABS HF @Prusa MINIIS 0.8.json"
 		},
+		{
+			"name": "Generic ASA @Prusa MK4 MMU3",
+			"sub_path": "filament/Generic ASA @Prusa MK4 MMU3.json"
+		},
 		{
 			"name": "Generic ASA @Prusa MK4S 0.6",
 			"sub_path": "filament/Generic ASA @Prusa MK4S 0.6.json"
@@ -2260,6 +2296,10 @@
 			"name": "Prusament ASA @CORE One HF 0.8",
 			"sub_path": "filament/Prusament ASA @CORE One HF 0.8.json"
 		},
+		{
+			"name": "Prusament ASA @MK4 MMU3",
+			"sub_path": "filament/Prusament ASA @MK4 MMU3.json"
+		},
 		{
 			"name": "Prusament ASA @MK4S 0.6",
 			"sub_path": "filament/Prusament ASA @MK4S 0.6.json"
@@ -2392,6 +2432,10 @@
 			"name": "Prusament PC Blend @CORE One HF 0.8",
 			"sub_path": "filament/Prusament PC Blend @CORE One HF 0.8.json"
 		},
+		{
+			"name": "Prusament PC Blend @MK4 MMU3",
+			"sub_path": "filament/Prusament PC Blend @MK4 MMU3.json"
+		},
 		{
 			"name": "Prusament PC Blend @MK4S 0.6",
 			"sub_path": "filament/Prusament PC Blend @MK4S 0.6.json"
@@ -2532,6 +2576,10 @@
 			"name": "Prusament PETG @CORE One HF 0.8",
 			"sub_path": "filament/Prusament PETG @CORE One HF 0.8.json"
 		},
+		{
+			"name": "Prusament PETG @MK4 MMU3",
+			"sub_path": "filament/Prusament PETG @MK4 MMU3.json"
+		},
 		{
 			"name": "Prusament PETG @MK4S 0.6",
 			"sub_path": "filament/Prusament PETG @MK4S 0.6.json"
@@ -2668,6 +2716,10 @@
 			"name": "Prusament PLA @CORE One HF 0.8",
 			"sub_path": "filament/Prusament PLA @CORE One HF 0.8.json"
 		},
+		{
+			"name": "Prusament PLA @MK4 MMU3",
+			"sub_path": "filament/Prusament PLA @MK4 MMU3.json"
+		},
 		{
 			"name": "Prusament PLA @MK4S 0.6",
 			"sub_path": "filament/Prusament PLA @MK4S 0.6.json"
@@ -2704,6 +2756,10 @@
 			"name": "Prusament rPLA @CORE One 0.8",
 			"sub_path": "filament/Prusament rPLA @CORE One 0.8.json"
 		},
+		{
+			"name": "Prusament rPLA @MK4 MMU3",
+			"sub_path": "filament/Prusament rPLA @MK4 MMU3.json"
+		},
 		{
 			"name": "Prusament rPLA @MK4S 0.6",
 			"sub_path": "filament/Prusament rPLA @MK4S 0.6.json"
@@ -2856,6 +2912,10 @@
 			"name": "Generic ABS @Prusa CORE One HF 0.8",
 			"sub_path": "filament/Generic ABS @Prusa CORE One HF 0.8.json"
 		},
+		{
+			"name": "Generic ABS @Prusa MK4 MMU3",
+			"sub_path": "filament/Generic ABS @Prusa MK4 MMU3.json"
+		},
 		{
 			"name": "Generic ASA @Prusa MK4S HF0.5",
 			"sub_path": "filament/Generic ASA @Prusa MK4S HF0.5.json"
@@ -2904,6 +2964,10 @@
 			"name": "Generic PETG @Prusa CORE One HF 0.8",
 			"sub_path": "filament/Generic PETG @Prusa CORE One HF 0.8.json"
 		},
+		{
+			"name": "Generic PETG @Prusa MK4 MMU3",
+			"sub_path": "filament/Generic PETG @Prusa MK4 MMU3.json"
+		},
 		{
 			"name": "Generic PLA @Prusa MK4S HF0.5",
 			"sub_path": "filament/Generic PLA @Prusa MK4S HF0.5.json"
@@ -2948,6 +3012,10 @@
 			"name": "Generic PLA @Prusa CORE One HF 0.8",
 			"sub_path": "filament/Generic PLA @Prusa CORE One HF 0.8.json"
 		},
+		{
+			"name": "Generic PLA @Prusa MK4 MMU3",
+			"sub_path": "filament/Generic PLA @Prusa MK4 MMU3.json"
+		},
 		{
 			"name": "Generic TPU @Prusa CORE One 0.6",
 			"sub_path": "filament/Generic TPU @Prusa CORE One 0.6.json"
@@ -2955,14 +3023,6 @@
 		{
 			"name": "Generic TPU @Prusa CORE One 0.8",
 			"sub_path": "filament/Generic TPU @Prusa CORE One 0.8.json"
-		},
-		{
-			"name": "Generic PC @Prusa",
-			"sub_path": "filament/Generic PC @Prusa.json"
-		},
-		{
-			"name": "Generic PLA Silk @Prusa CORE One INDX",
-			"sub_path": "filament/Generic PLA Silk @Prusa CORE One INDX.json"
 		}
 	],
 	"machine_list": [
@@ -7,6 +7,9 @@
 	"setting_id": "ASYz8yASE82tQDII",
 	"filament_id": "OFY9muEs",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet_hf"
+	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.4 nozzle"
 	],
@@ -7,6 +7,9 @@
 	"setting_id": "mzZCm8XDmAR23YR6",
 	"filament_id": "OFY9muEs",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet_hf"
+	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.5 nozzle"
 	],
@@ -7,6 +7,9 @@
 	"setting_id": "gJhX2KBpk4wfXIj0",
 	"filament_id": "OFY9muEs",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet_hf"
+	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.6 nozzle"
 	],
@@ -5,6 +5,9 @@
 	"from": "system",
 	"setting_id": "JEatvybG9xIkrPk3",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_indx"
+	],
 	"filament_cost": [
 		"34.65"
 	],
@@ -6,6 +6,9 @@
 	"from": "system",
 	"setting_id": "0k31oXq1pLQsHvrj",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet"
+	],
 	"chamber_temperature": [
 		"40"
 	],
@@ -0,0 +1,19 @@
+{
+	"type": "filament",
+	"name": "Generic ABS @Prusa MK4 MMU3",
+	"inherits": "Generic ABS @Prusa MK4",
+	"from": "system",
+	"setting_id": "uFmixo2FX1yxNsDB",
+	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet"
+	],
+	"compatible_printers": [
+		"Prusa MK4 MMU3 0.4 nozzle",
+		"Prusa MK4 MMU3 0.6 nozzle",
+		"Prusa MK4 MMU3 HF0.4 nozzle"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"35"
+	]
+}
@@ -7,6 +7,9 @@
 	"setting_id": "eKDfiVRE59itoppm",
 	"filament_id": "OFLPAxz3",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet_hf"
+	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.4 nozzle"
 	],
@@ -7,6 +7,9 @@
 	"setting_id": "ZjHf5Vvtf4ESNnWb",
 	"filament_id": "OFLPAxz3",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet_hf"
+	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.5 nozzle"
 	],
@@ -7,6 +7,9 @@
 	"setting_id": "aRDgUgQJWdNDJx5c",
 	"filament_id": "OFLPAxz3",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet_hf"
+	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.6 nozzle"
 	],
@@ -6,6 +6,9 @@
 	"from": "system",
 	"setting_id": "Q7fgojkHRZI0floy",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet"
+	],
 	"chamber_temperature": [
 		"40"
 	],
@@ -0,0 +1,19 @@
+{
+	"type": "filament",
+	"name": "Generic ASA @Prusa MK4 MMU3",
+	"inherits": "Generic ASA @Prusa MK4",
+	"from": "system",
+	"setting_id": "iq9bFkpmAOJ4ae4g",
+	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet"
+	],
+	"compatible_printers": [
+		"Prusa MK4 MMU3 0.4 nozzle",
+		"Prusa MK4 MMU3 0.6 nozzle",
+		"Prusa MK4 MMU3 HF0.4 nozzle"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"35"
+	]
+}
@@ -0,0 +1,16 @@
+{
+	"type": "filament",
+	"name": "Generic PC @Prusa MK4 MMU3",
+	"inherits": "Generic PC @Prusa",
+	"from": "system",
+	"setting_id": "qMawlK9QPI7DcF8I",
+	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet"
+	],
+	"compatible_printers": [
+		"Prusa MK4 MMU3 0.4 nozzle",
+		"Prusa MK4 MMU3 0.6 nozzle",
+		"Prusa MK4 MMU3 HF0.4 nozzle"
+	]
+}
@@ -7,6 +7,9 @@
 	"setting_id": "7oUyjvRHLH4bJyX0",
 	"filament_id": "OFYPdQJh",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet_hf"
+	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.4 nozzle"
 	],
@@ -7,6 +7,9 @@
 	"setting_id": "6HiIOGURZWwman1l",
 	"filament_id": "OFYPdQJh",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet_hf"
+	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.5 nozzle"
 	],
@@ -7,6 +7,9 @@
 	"setting_id": "KKiug7A9NOQPe1m7",
 	"filament_id": "OFYPdQJh",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet_hf"
+	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.6 nozzle"
 	],
@@ -5,6 +5,9 @@
 	"from": "system",
 	"setting_id": "HbevqxqvYHuvRc3v",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_indx"
+	],
 	"filament_cost": [
 		"27.82"
 	],
@@ -6,6 +6,9 @@
 	"from": "system",
 	"setting_id": "W71PW5bpf7CV16D4",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet"
+	],
 	"chamber_temperature": [
 		"35"
 	],
@@ -0,0 +1,19 @@
+{
+	"type": "filament",
+	"name": "Generic PETG @Prusa MK4 MMU3",
+	"inherits": "Generic PETG @Prusa MK4",
+	"from": "system",
+	"setting_id": "lBiZBFpSXZNIp5XG",
+	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet"
+	],
+	"compatible_printers": [
+		"Prusa MK4 MMU3 0.4 nozzle",
+		"Prusa MK4 MMU3 0.6 nozzle",
+		"Prusa MK4 MMU3 HF0.4 nozzle"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"35"
+	]
+}
@@ -8,12 +8,16 @@
 	"filament_id": "OFDSrzZ8",
 	"instantiation": "true",
 	"compatible_printers": [
-		"Prusa CORE One 0.6 nozzle"
+		"Prusa CORE One 0.6 nozzle",
+		"Prusa CORE One MMU3 0.6 nozzle"
 	],
 	"nozzle_temperature": [
 		"210"
 	],
 	"slow_down_layer_time": [
 		"15"
+	],
+	"filament_cooling_final_speed": [
+		"1.5"
 	]
 }
@@ -7,6 +7,9 @@
 	"setting_id": "vniEPaoyABoAfLFa",
 	"filament_id": "OFDSrzZ8",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pla_hf"
+	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.4 nozzle",
 		"Prusa CORE One L HF 0.4 nozzle"
@@ -7,6 +7,9 @@
 	"setting_id": "NPEs4gtBlKWupYZX",
 	"filament_id": "OFDSrzZ8",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pla_hf"
+	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.5 nozzle"
 	],
@@ -7,6 +7,9 @@
 	"setting_id": "SnfULjrWGCiA7ljq",
 	"filament_id": "OFDSrzZ8",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pla_hf"
+	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.6 nozzle"
 	],
@@ -24,5 +27,8 @@
 	],
 	"slow_down_min_speed": [
 		"15"
+	],
+	"filament_cooling_final_speed": [
+		"1.5"
 	]
 }
@@ -5,6 +5,9 @@
 	"from": "system",
 	"setting_id": "4qjcaIf1vk3K1x4Z",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_indx"
+	],
 	"filament_cost": [
 		"25.4"
 	],
@@ -6,6 +6,9 @@
 	"from": "system",
 	"setting_id": "r2i4c7DsYXYIMVCX",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pla"
+	],
 	"chamber_temperature": [
 		"20"
 	],
@@ -17,8 +20,7 @@
 		"Prusa CORE One L 0.4 nozzle",
 		"Prusa CORE One MMU3 0.4 nozzle",
 		"Prusa CORE One MMU3 0.25 nozzle",
-		"Prusa CORE One MMU3 0.3 nozzle",
-		"Prusa CORE One MMU3 0.6 nozzle"
+		"Prusa CORE One MMU3 0.3 nozzle"
 	],
 	"fan_cooling_layer_time": [
 		"40"
@@ -0,0 +1,16 @@
+{
+	"type": "filament",
+	"name": "Generic PLA @Prusa MK4 MMU3",
+	"inherits": "Generic PLA @Prusa MK4",
+	"from": "system",
+	"setting_id": "kZvIh84niJ487FsY",
+	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pla"
+	],
+	"compatible_printers": [
+		"Prusa MK4 MMU3 0.4 nozzle",
+		"Prusa MK4 MMU3 0.6 nozzle",
+		"Prusa MK4 MMU3 HF0.4 nozzle"
+	]
+}
@@ -29,5 +29,8 @@
 	],
 	"slow_down_layer_time": [
 		"15"
+	],
+	"filament_cooling_final_speed": [
+		"1.5"
 	]
 }
@@ -5,6 +5,9 @@
 	"from": "system",
 	"setting_id": "eKla6su22rYaL9iz",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_indx"
+	],
 	"filament_flow_ratio": [
 		"1",
 		"1",
@@ -6,6 +6,9 @@
 	"from": "system",
 	"setting_id": "F9lNHyhZwZi7aD74",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pla"
+	],
 	"chamber_temperature": [
 		"20"
 	],
@@ -6,6 +6,9 @@
 	"setting_id": "tXktQXr79am1s5UL",
 	"filament_id": "OFmFwUWM",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet_hf"
+	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.4 nozzle"
 	],
@@ -6,6 +6,9 @@
 	"setting_id": "YbyojtjXvEtI4Tt3",
 	"filament_id": "OFmFwUWM",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet_hf"
+	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.5 nozzle"
 	],
@@ -6,6 +6,9 @@
 	"setting_id": "35H9TLr1p2Jy767g",
 	"filament_id": "OFmFwUWM",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet_hf"
+	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.6 nozzle"
 	],
@@ -7,6 +7,9 @@
 	"setting_id": "UUTjJ4Y8St3c87jD",
 	"filament_id": "OFmFwUWM",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet"
+	],
 	"chamber_temperature": [
 		"40"
 	],
@@ -0,0 +1,19 @@
+{
+	"type": "filament",
+	"name": "Prusament ASA @MK4 MMU3",
+	"inherits": "Prusament ASA @MK4",
+	"from": "system",
+	"setting_id": "IRJ2dtBgjCMfmpOH",
+	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet"
+	],
+	"compatible_printers": [
+		"Prusa MK4 MMU3 0.4 nozzle",
+		"Prusa MK4 MMU3 0.6 nozzle",
+		"Prusa MK4 MMU3 HF0.4 nozzle"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"35"
+	]
+}
@@ -7,6 +7,9 @@
 	"setting_id": "sNGgucQjiFXwuFkq",
 	"filament_id": "OF4MZtnE",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet"
+	],
 	"chamber_temperature": [
 		"40"
 	],
@@ -6,6 +6,9 @@
 	"setting_id": "pEsP537TBR5kozQB",
 	"filament_id": "OFvDbkFq",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet_hf"
+	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.4 nozzle"
 	],
@@ -6,6 +6,9 @@
 	"setting_id": "3IfLi1ZVCKKbEBUW",
 	"filament_id": "OFvDbkFq",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet_hf"
+	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.5 nozzle"
 	],
@@ -6,6 +6,9 @@
 	"setting_id": "Q8qWw2G7l2UvxGut",
 	"filament_id": "OFvDbkFq",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet_hf"
+	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.6 nozzle"
 	],
@@ -7,6 +7,9 @@
 	"setting_id": "x1SkWhSSkVVIPwCF",
 	"filament_id": "OFvDbkFq",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet"
+	],
 	"chamber_temperature": [
 		"40"
 	],
@@ -0,0 +1,16 @@
+{
+	"type": "filament",
+	"name": "Prusament PC Blend @MK4 MMU3",
+	"inherits": "Prusament PC Blend @MK4",
+	"from": "system",
+	"setting_id": "gmNuCspHHxgP6zH8",
+	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet"
+	],
+	"compatible_printers": [
+		"Prusa MK4 MMU3 0.4 nozzle",
+		"Prusa MK4 MMU3 0.6 nozzle",
+		"Prusa MK4 MMU3 HF0.4 nozzle"
+	]
+}
@@ -7,6 +7,9 @@
 	"setting_id": "B8Cm9l8i9osp5J2q",
 	"filament_id": "OFdO6vpt",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet"
+	],
 	"chamber_temperature": [
 		"40"
 	],
@@ -6,6 +6,9 @@
 	"setting_id": "lwT1VxW5OkY36kUX",
 	"filament_id": "OFkR8E2c",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet_hf"
+	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.4 nozzle"
 	],
@@ -6,6 +6,9 @@
 	"setting_id": "XAgW7fElXxhaKaBT",
 	"filament_id": "OFkR8E2c",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet_hf"
+	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.5 nozzle"
 	],
@@ -6,6 +6,9 @@
 	"setting_id": "6aTGEZj2EmpTR1mu",
 	"filament_id": "OFkR8E2c",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet_hf"
+	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.6 nozzle"
 	],
@@ -7,6 +7,9 @@
 	"setting_id": "LSvba9ds3XTwDMCG",
 	"filament_id": "OFkR8E2c",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet"
+	],
 	"chamber_temperature": [
 		"35"
 	],
@@ -0,0 +1,19 @@
+{
+	"type": "filament",
+	"name": "Prusament PETG @MK4 MMU3",
+	"inherits": "Prusament PETG @MK4",
+	"from": "system",
+	"setting_id": "7DQ6YEKyQKYDTKtE",
+	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pet"
+	],
+	"compatible_printers": [
+		"Prusa MK4 MMU3 0.4 nozzle",
+		"Prusa MK4 MMU3 0.6 nozzle",
+		"Prusa MK4 MMU3 HF0.4 nozzle"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"35"
+	]
+}
@@ -6,6 +6,9 @@
 	"setting_id": "2viuOmBvXuQm2FwV",
 	"filament_id": "OFkR8E2c",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_indx"
+	],
 	"filament_flow_ratio": [
 		"1"
 	],
@@ -6,6 +6,9 @@
 	"setting_id": "mf4Muog4IcsgkYoA",
 	"filament_id": "OFnO4wnf",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pla_hf"
+	],
 	"compatible_printers": [
 		"Prusa CORE One HF 0.4 nozzle",
 		"Prusa CORE One L HF 0.4 nozzle"
@@ -7,6 +7,9 @@
 	"setting_id": "PuujUMjNKLZvZNAH",
 	"filament_id": "OFnO4wnf",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pla"
+	],
 	"chamber_temperature": [
 		"20"
 	],
@@ -104,5 +107,11 @@
 	],
 	"slow_down_min_speed": [
 		"20"
+	],
+	"filament_unloading_speed": [
+		"100"
+	],
+	"filament_unloading_speed_start": [
+		"100"
 	]
 }
@@ -0,0 +1,22 @@
+{
+	"type": "filament",
+	"name": "Prusament PLA @MK4 MMU3",
+	"inherits": "Prusament PLA @MK4",
+	"from": "system",
+	"setting_id": "MsDcN4npnmLRXOjm",
+	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pla"
+	],
+	"compatible_printers": [
+		"Prusa MK4 MMU3 0.4 nozzle",
+		"Prusa MK4 MMU3 0.6 nozzle",
+		"Prusa MK4 MMU3 HF0.4 nozzle"
+	],
+	"filament_unloading_speed": [
+		"100"
+	],
+	"filament_unloading_speed_start": [
+		"100"
+	]
+}
@@ -6,6 +6,9 @@
 	"setting_id": "B2UB9QUbbjpn12Ka",
 	"filament_id": "OFnO4wnf",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_indx"
+	],
 	"filament_flow_ratio": [
 		"1"
 	],
@@ -7,6 +7,9 @@
 	"setting_id": "085dGkrnPhatF07x",
 	"filament_id": "OFh7mvPO",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pla"
+	],
 	"chamber_temperature": [
 		"20"
 	],
@@ -105,5 +108,11 @@
 	],
 	"slow_down_min_speed": [
 		"20"
+	],
+	"filament_unloading_speed": [
+		"60"
+	],
+	"filament_unloading_speed_start": [
+		"60"
 	]
 }
@@ -8,12 +8,16 @@
 	"instantiation": "true",
 	"compatible_printers": [
 		"Prusa CORE One 0.6 nozzle",
-		"Prusa CORE One HF 0.6 nozzle"
+		"Prusa CORE One HF 0.6 nozzle",
+		"Prusa CORE One MMU3 0.6 nozzle"
 	],
 	"filament_max_volumetric_speed": [
 		"14"
 	],
 	"slow_down_layer_time": [
 		"15"
+	],
+	"filament_cooling_final_speed": [
+		"1.5"
 	]
 }
@@ -7,6 +7,9 @@
 	"setting_id": "Bw6H4vFnq7YExyLd",
 	"filament_id": "OFWRITFw",
 	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pla"
+	],
 	"chamber_temperature": [
 		"20"
 	],
@@ -22,8 +25,7 @@
 		"Prusa CORE One HF 0.5 nozzle",
 		"Prusa CORE One MMU3 0.4 nozzle",
 		"Prusa CORE One MMU3 0.25 nozzle",
-		"Prusa CORE One MMU3 0.3 nozzle",
-		"Prusa CORE One MMU3 0.6 nozzle"
+		"Prusa CORE One MMU3 0.3 nozzle"
 	],
 	"fan_cooling_layer_time": [
 		"40"
@@ -0,0 +1,16 @@
+{
+	"type": "filament",
+	"name": "Prusament rPLA @MK4 MMU3",
+	"inherits": "Prusament rPLA @MK4",
+	"from": "system",
+	"setting_id": "wKhvyGpgjmW6glLj",
+	"instantiation": "true",
+	"include": [
+		"fdm_filament_template_nextruder_pla"
+	],
+	"compatible_printers": [
+		"Prusa MK4 MMU3 0.4 nozzle",
+		"Prusa MK4 MMU3 0.6 nozzle",
+		"Prusa MK4 MMU3 HF0.4 nozzle"
+	]
+}
@@ -0,0 +1,21 @@
+{
+	"type": "filament",
+	"name": "fdm_filament_template_indx",
+	"from": "system",
+	"instantiation": "false",
+	"filament_multitool_ramming": [
+		"1"
+	],
+	"filament_multitool_ramming_flow": [
+		"30"
+	],
+	"filament_multitool_ramming_volume": [
+		"18"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"10"
+	],
+	"filament_start_gcode": [
+		"M572 S{pressure_advance[filament_extruder_id]} ; Pressure advance\nM573 R"
+	]
+}
@@ -0,0 +1,36 @@
+{
+	"type": "filament",
+	"name": "fdm_filament_template_nextruder_pet",
+	"from": "system",
+	"instantiation": "false",
+	"filament_ramming_parameters": [
+		"250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387"
+	],
+	"filament_loading_speed": [
+		"10"
+	],
+	"filament_loading_speed_start": [
+		"50"
+	],
+	"filament_unloading_speed": [
+		"60"
+	],
+	"filament_unloading_speed_start": [
+		"60"
+	],
+	"filament_cooling_moves": [
+		"3"
+	],
+	"filament_cooling_initial_speed": [
+		"5"
+	],
+	"filament_cooling_final_speed": [
+		"2.5"
+	],
+	"filament_stamping_distance": [
+		"45"
+	],
+	"filament_stamping_loading_speed": [
+		"26.5"
+	]
+}
@@ -0,0 +1,9 @@
+{
+	"type": "filament",
+	"name": "fdm_filament_template_nextruder_pet_hf",
+	"from": "system",
+	"instantiation": "false",
+	"filament_ramming_parameters": [
+		"250 100 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387"
+	]
+}
@@ -0,0 +1,36 @@
+{
+	"type": "filament",
+	"name": "fdm_filament_template_nextruder_pla",
+	"from": "system",
+	"instantiation": "false",
+	"filament_ramming_parameters": [
+		"250 100 40.1613 40.3548 40.4516 40.3548 40.2581| 0.05 40.1483 0.45 40.3419 0.95 40.3419 1.45 40.3419 1.95 40.3419 2.45 40.3419 2.95 40.3419 3.45 40.3419 3.95 40.3419 4.45 40.3419 4.95 40.3419"
+	],
+	"filament_loading_speed": [
+		"10"
+	],
+	"filament_loading_speed_start": [
+		"50"
+	],
+	"filament_unloading_speed": [
+		"40"
+	],
+	"filament_unloading_speed_start": [
+		"30"
+	],
+	"filament_cooling_moves": [
+		"2"
+	],
+	"filament_cooling_initial_speed": [
+		"10"
+	],
+	"filament_cooling_final_speed": [
+		"3.5"
+	],
+	"filament_stamping_distance": [
+		"45"
+	],
+	"filament_stamping_loading_speed": [
+		"29"
+	]
+}
@@ -0,0 +1,9 @@
+{
+	"type": "filament",
+	"name": "fdm_filament_template_nextruder_pla_hf",
+	"from": "system",
+	"instantiation": "false",
+	"filament_ramming_parameters": [
+		"250 100 39.871 39.871| 0.05 39.9547 0.45 39.9547 0.95 39.9547 1.45 39.9547 1.95 39.9547 2.45 39.9547 2.95 39.9547 3.45 39.9547 3.95 39.9547 4.45 39.9547 4.95 39.9547"
+	]
+}
@@ -3,7 +3,7 @@
 	"name": "Prusa CORE One MMU3",
 	"bed_model": "coreone_bed.stl",
 	"bed_texture": "coreone.svg",
-	"default_materials": "Generic ABS @Prusa CORE One;Generic ASA @Prusa CORE One;Generic PETG @Prusa CORE One;Generic PLA @Prusa CORE One;Generic PLA Silk @Prusa CORE One;Generic TPU @Prusa CORE One",
+	"default_materials": "Generic ABS @Prusa CORE One;Generic ASA @Prusa CORE One;Generic PETG @Prusa CORE One;Generic PLA @Prusa CORE One;Generic PLA Silk @Prusa CORE One;Generic TPU @Prusa CORE One;Generic PLA @Prusa CORE One 0.6",
 	"family": "Prusa",
 	"hotend_model": "",
 	"machine_tech": "FFF",
@@ -16,7 +16,7 @@
 	],
 	"printer_model": "Prusa MK4 MMU3",
 	"default_filament_profile": [
-		"Generic PLA @System"
+		"Generic PLA @Prusa MK4 MMU3"
 	],
 	"default_print_profile": "0.20mm SPEED @MK4 MMU3 0.4",
 	"printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_MK4IS\nPRINTER_MODEL_MK4MMU3\nPG"
@@ -17,7 +17,7 @@
 	"printer_model": "Prusa MK4 MMU3",
 	"printer_variant": "0.6",
 	"default_filament_profile": [
-		"Generic PLA @System"
+		"Generic PLA @Prusa MK4 MMU3"
 	],
 	"default_print_profile": "0.25mm SPEED @MK4 MMU3 0.6",
 	"printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_MK4IS\nPRINTER_MODEL_MK4MMU3\nPG"
@@ -8,5 +8,5 @@
 	"bed_model": "mk4_bed.stl",
 	"bed_texture": "mk4is.svg",
 	"hotend_model": "",
-	"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
+	"default_materials": "Generic PLA @Prusa MK4 MMU3;Generic PETG @Prusa MK4 MMU3;Generic ABS @Prusa MK4 MMU3"
 }
@@ -16,7 +16,7 @@
 	],
 	"printer_model": "Prusa MK4 MMU3 HF",
 	"default_filament_profile": [
-		"Generic PLA @System"
+		"Generic PLA @Prusa MK4 MMU3"
 	],
 	"default_print_profile": "0.20mm SPEED @MK4 MMU3 HF0.4",
 	"printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_MK4IS\nPRINTER_MODEL_MK4MMU3\nPG\nHF_NOZZLE"
@@ -8,5 +8,5 @@
 	"bed_model": "mk4_bed.stl",
 	"bed_texture": "mk4is.svg",
 	"hotend_model": "",
-	"default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System"
+	"default_materials": "Generic PLA @Prusa MK4 MMU3;Generic PETG @Prusa MK4 MMU3;Generic ABS @Prusa MK4 MMU3"
 }