Add a Shell-Only Drag Mode That Keeps the Visible Surface of the Print

Outer walls is a role filter, which loses the prime tower, whose every segment
shares one role, and every top and bottom surface between the range's ends. A
fifth mode, Shell only, keeps what a geometric classification marks as the
visible surface of the print, of one layer in every N, plus whatever a view from
straight above or below sees of the layers it skips, so that a step does not
vanish.

The classification runs once per load, the first time the mode is needed, and
is purely geometric: each layer is rasterized into a half-millimetre occupancy
grid and closed so that sparse infill reads as solid, a cell is on the shell
when any of its six neighbours is empty, and a segment is kept when at least
half of the cells it crosses are. The closing dilates each connected component
on its own and leaves a cell two components reach empty, so the gap between two
close objects is never bridged. The first inner wall beside an outer wall is
kept as well, since the step of a sloped surface is narrower than a cell, and
the interior infill roles and gap fill are never taken, whatever the geometry
says. The layers are split across up to eight workers, and an allocation
failure on a huge print falls back to keeping everything but the hidden infill.

Separate from the other modes so that it can be dropped on its own.

.claude/skills/orca-profiles/references/naming.md

@@ -35,9 +35,10 @@ toolhead, a multi-material build) may drop the suffix — still an exact referen
 ## `process`
 
 `<layer height>mm <quality> @<target>` — [process-profiles.md](process-profiles.md#naming) has the
-quality ladder and the `fdm_process_*` base names. The `@<target>` is a human label, not a reference: it
-usually does not equal a real variant, and compatibility comes from the resolved `compatible_printers`
-list or condition.
+quality ladder and the `fdm_process_*` base names. The quality label stays before `@` and the printer
+target after it: a printer model in the quality slot leaves the tier undescribed. The `@<target>` is a
+human label, not a reference: it usually does not equal a real variant, and compatibility comes from the
+resolved `compatible_printers` list or condition.
 
 ## `filament`
 
@@ -58,6 +59,30 @@ to the first `@`; the target half is a label except for reserved forms:
   chosen at runtime
   ([color is a runtime property](filament-profiles.md#color-is-a-runtime-property)).
 
+## Checking names
+
+Check every newly added profile's `name` against its type and role: model, selectable preset or base.
+Apply the same checks to an intentional name change. The human-readable naming shapes are not enforced
+by `check`: inspect the added or renamed profiles in the diff, using neighbouring names as context and
+following the bundle's established style where the type-specific conventions allow variation.
+
+For bases (`instantiation: "false"`), use the type-specific conventions:
+
+| Type | Base names |
+| --- | --- |
+| `machine` | `fdm_machine_common`, `fdm_<vendor>_common`, or an established machine-family base name |
+| `process` | `fdm_process_*`, including shared roots and per-layer-height / per-nozzle bases such as `fdm_process_single_0.20` |
+| `filament` | `fdm_filament_*` material roots or `<Product> @base` product roots |
+
+Shared base names across bundles are intentional, including product roots such as `Fiberon PA6-CF @base`.
+Investigate a newly authored base that retains an unrelated selectable preset's name from a copy.
+
+**Name uniqueness is checked by CI.** `check_preset_name_uniqueness` checks type + name within each
+bundle. `check_machine_model_name_uniqueness` checks model names across the entire tree, even with
+`--vendor`: `Preset::get_printer_type` matches `printer_model` against all vendors' models and returns
+the first match, so a duplicate makes lookup depend on vendor order. Both run as part of
+`python3 scripts/orca_profile_tool.py check`.
+
 ## Not the same as the filename
 
 The loader keys off `name`, and a filename that disagrees usually still loads. Index `name` must equal the

.claude/skills/orca-profiles/references/review-checklist.md

@@ -17,6 +17,7 @@ The table highlights gaps that need human review. What CI *does* run:
 | A `renamed_from` whose old name is still a live preset | The redirect is inert while a live preset carries that name |
 | A preset differentiated only by color, or an all-printer library preset without `@System` | Per-color presets split one product across ids and the selector fills with near-duplicates; CI stays green |
 | Per-extruder vector length on a multi-nozzle printer | Silently padded (with the **first** value) or truncated |
+| A name that ignores its type's convention — a model in a `process` quality slot, or an unrelated target label left in a copied preset | The selector misrepresents the preset's quality or intended printer |
 
 ## 1. Was the vendor `version` bumped?
 
@@ -169,6 +170,15 @@ vendor, and a filename that disagrees with the preset's `name` (common; the load
 Check for Windows-invalid characters, reserved device names, trailing path-component spaces/dots,
 and case mismatches in `sub_path` or asset paths. See [cross-platform paths](validation.md#cross-platform-paths).
 
+## 16. Do the preset names follow the conventions?
+
+Check **every newly added profile and intentional name change**, including models and bases,
+against [the naming conventions](naming.md#checking-names). Preserve shipped names during
+ordinary tuning; renaming a shipped selectable preset requires the migration in item 4.
+
+*Why:* CI checks name uniqueness, but does not enforce the naming conventions. Catch naming
+mistakes before the names ship and existing projects depend on them.
+
 ---
 
 ## Reporting the review

docs/HLSD/gcode-preview-dragging.md

@@ -0,0 +1,116 @@
+# G-code preview while dragging
+
+The sliced preview draws every toolpath segment of the plate as an instanced box. On a large
+plate that is tens of millions of segments, and the frame is GPU-bound: the cost is the number of
+instances drawn, not anything the CPU does per frame. Dragging the camera over such a plate cannot
+keep up. The `preview_reduced_detail_mode` preference (*Graphics > G-code Preview*, off by
+default) lets the preview draw less while the user drags and put the full toolpaths back when they
+let go.
+
+| Preference | Values | Effect |
+|---|---|---|
+| `preview_reduced_detail_mode` | `off`, `solid`, `layers`, `outer_walls`, `shell` | what is drawn while dragging |
+| `preview_reduced_detail_layer_stride` | 1–20 | one layer in every N is kept by the toolpath modes |
+
+libvgcode (`src/libvgcode`) builds and binds the reduced toolpath set, `GCodeViewer` maps the
+preferences onto it and draws the solid model, and `GLCanvas3D` decides when the user is dragging.
+The OpenGL ES path keeps a single set and ignores the preference.
+
+## Two sets, one walk
+
+`ViewerImpl::update_enabled_entities()` walks the visible vertex range once and fills two segment
+index buffers side by side: the **full** set and the **reduced** set (segments and options).
+Building them together is what makes switching free: starting or ending a drag is a buffer
+binding, never a rebuild. A change of mode or stride does rebuild. Nothing is built while the mode
+is off, and the reduced buffers are then uploaded empty so that the last set does not stay
+allocated.
+
+Whatever the mode leaves out, the bottom and top layers of the visible range are kept whole: they
+are the faces the range cuts open, and the top is what the user is looking at.
+
+### Modes
+
+- `EndLayersOnly` (`solid` in the preference) keeps only the two end layers. `GCodeViewer` then
+  draws the sliced objects and the prime tower as opaque solids, see below.
+- `LayersOnly` (`layers`) keeps every role of one layer in every stride.
+- `OuterWallsOnly` (`outer_walls`) keeps the outer and overhang perimeters of one layer in every
+  stride. The prime tower and supports have other roles and are left out.
+- `ShellOnly` (`shell`) keeps what the shell extraction below marks as visible surface, of one
+  layer in every stride, plus whatever a view from above or below sees of the skipped layers, so
+  that a step does not vanish. It is the only mode that knows the prime tower's outside from its
+  inside.
+
+## The solid model
+
+The preview already loads the sliced objects as shells for its translucent ghost.
+`GCodeViewer::render_solid_model()` draws those shells opaque, in their filament colors, with the
+`gouraud` shader, whose z range cuts them to the visible layer range. The two toolpath layers of
+the reduced set are drawn afterwards and cap the cut with what was really printed there. The
+shells hold only the objects, so while this mode is on the prime tower is added from its sliced
+mesh, positioned as the print placed it. It is added or removed on its own when the mode changes,
+without reloading the objects, keeps its opaque color so that it never appears among the
+translucent shells, and stays out of their bounding box. Supports have no mesh and are not shown,
+and `load_shells()` drops every non-model-part volume, so a negative volume is not cut out.
+
+A plate whose shells are not loaded keeps drawing toolpaths, since the solid model would leave
+only the end layers.
+
+## Shell extraction
+
+`ViewerImpl::update_shell_bitset()` classifies every extrusion segment once per load, on demand
+the first time the shell mode needs it, and records the result in four bit sets. It is purely
+geometric so that the wipe tower, whose every segment shares one role, works as well as the
+objects.
+
+Each layer is rasterized into a coarse 2D **occupancy grid** over the print's footprint: cells
+are 0.5 mm, or coarser so that the grid is at most 1024 cells across. The footprint is then
+**closed** with a radius of 2.5 mm so that sparse infill and support read as the solid area they
+belong to, while holes wider than 5 mm stay open. The closing dilates each 8-connected component
+separately and leaves a cell that two components both reach empty, so the gap between two objects
+standing close together is never bridged and both of their facing walls stay on the shell;
+fragments under eight cells do not spread and are absorbed by whatever reaches them. A separable
+erosion shrinks the result back, and the raw cells are OR-ed in again so that a closing never
+loses one.
+
+A cell is a **shell cell** when it is filled and any of its six neighbours, four in the layer,
+one below, one above, is not. A segment is on the shell when at least half of the cells it
+crosses are shell cells: walls run along the shell, infill only touches it at the ends. The
+interior infill roles and gap fill are excluded regardless, since short infill segments hugging a
+wall would otherwise pass by the thousand.
+
+Two refinements keep sloped surfaces closed:
+
+- **Near-shell inner walls.** The step between one layer's outer wall and the next is often
+  narrower than a cell. An inner wall (`Perimeter`) segment whose midpoint lies within a line and
+  a half of an outer or overhang perimeter of the same layer is kept as well.
+- **Top and bottom visibility.** The same pass records the highest and lowest layer occupying
+  each cell over the whole print. A segment whose layer is the topmost occupant of any cell it
+  crosses is visible from above, and likewise from below with the lowest. These segments are kept
+  even when their layer is skipped by the stride.
+
+The layer range is split across up to eight `std::async` workers, each owning its grids. An
+allocation failure on a huge print falls back to marking every segment as shell, which leaves out
+only the hidden infill roles.
+
+## Deciding that the user is dragging
+
+`GLCanvas3D::_update_preview_interaction()` runs at the top of every preview frame, before the
+canvas decides whether to reuse its cached scene, so that the switch lands in that frame. Dragging
+is `GLCanvas3D::is_user_interacting()`, the same answer the scene cache reads: the camera, the
+navigator, a gizmo, the rectangle selection or either slider being held. A slider reports this from
+ImGui's active id rather than its dirty flag, which is raised and consumed inside one frame. A
+wheel step has no duration, so it holds the reduced set for a 150 ms settle time instead, and the
+frame that restores the toolpaths is scheduled for when that time runs out, since the render timer
+only wakes the idle loop. A drag cut short by focus or capture loss is ended explicitly, and a
+button release wakes the idle loop, because on some platforms nothing else would until the next
+input.
+
+## Reused scene frames
+
+`GLCanvas3D` keeps its last scene pass for frames that only rebuild the overlay (`SceneCache`). Its
+key covers the canvas size, the camera and hover state, not what the toolpath sets draw, so a frame
+that reuses the scene must never be one on which the set is switched.
+`_update_preview_interaction()` therefore reports whether the bound set changed, and a frame on
+which it did redraws the scene. The canvas neither captures nor reuses the scene while the user
+drags, so no reduced frame outlives a drag, and the frame that ends a wheel's settle time is
+requested as a full frame.

resources/profiles/Anker/machine/fdm_marlin_common.json

@@ -6,6 +6,7 @@
 	"instantiation": "false",
 	"gcode_flavor": "marlin2",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
+	"file_start_gcode": ";TIME:{print_time_sec}s",
 	"machine_start_gcode": "M4899 T3 ; Enable v3 jerk and S-curve acceleration \nM104 S150 ; Set hotend temp to 150 degrees to prevent ooze\nM190 S{first_layer_bed_temperature[0]} ; set and wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; set final nozzle temp to stabilize\nG28 ;Home\n;LAYER_COUNT:{total_layer_count}",
 	"machine_end_gcode": "M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM18",
 	"change_filament_gcode": "M600",

resources/profiles/Anycubic.json

@@ -1,6 +1,6 @@
 {
 	"name": "Anycubic",
-	"version": "02.04.00.05",
+	"version": "02.04.00.07",
 	"force_update": "0",
 	"description": "Anycubic configurations",
 	"machine_model_list": [
@@ -48,6 +48,10 @@
 			"name": "Anycubic Kobra 3 Max",
 			"sub_path": "machine/Anycubic Kobra 3 Max.json"
 		},
+		{
+			"name": "Anycubic Kobra 3 V2",
+			"sub_path": "machine/Anycubic Kobra 3 V2.json"
+		},
 		{
 			"name": "Anycubic Kobra Max",
 			"sub_path": "machine/Anycubic Kobra Max.json"
@@ -102,6 +106,10 @@
 			"name": "0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "process/0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
 			"sub_path": "process/0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json"
@@ -118,6 +126,10 @@
 			"name": "0.10mm Detail @Anycubic Kobra 3 0.2 nozzle",
 			"sub_path": "process/0.10mm Detail @Anycubic Kobra 3 0.2 nozzle.json"
 		},
+		{
+			"name": "0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle",
+			"sub_path": "process/0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle.json"
+		},
 		{
 			"name": "0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
 			"sub_path": "process/0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json"
@@ -142,6 +154,10 @@
 			"name": "0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "process/0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
 			"sub_path": "process/0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json"
@@ -214,6 +230,10 @@
 			"name": "0.16mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "process/0.16mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle",
 			"sub_path": "process/0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle.json"
@@ -286,6 +306,10 @@
 			"name": "0.20mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "process/0.20mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle",
 			"sub_path": "process/0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle.json"
@@ -342,6 +366,10 @@
 			"name": "0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "process/0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
 			"sub_path": "process/0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json"
@@ -370,6 +398,10 @@
 			"name": "0.28mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "process/0.28mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle",
 			"sub_path": "process/0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle.json"
@@ -426,6 +458,10 @@
 			"name": "0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle",
 			"sub_path": "process/0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json"
 		},
+		{
+			"name": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "process/0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
 		{
 			"name": "0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
 			"sub_path": "process/0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json"
@@ -454,6 +490,10 @@
 			"name": "0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "process/0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "process/0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
 		{
 			"name": "0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
 			"sub_path": "process/0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json"
@@ -477,6 +517,34 @@
 		{
 			"name": "0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
 			"sub_path": "process/0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json"
+		},
+		{
+			"name": "0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "process/0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "process/0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "process/0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
+		{
+			"name": "0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "process/0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json"
 		}
 	],
 	"filament_list": [
@@ -528,6 +596,10 @@
 			"name": "Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "filament/Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic ABS @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic ABS @Anycubic Kobra S1 0.4 nozzle.json"
@@ -564,6 +636,10 @@
 			"name": "Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "filament/Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic ASA @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic ASA @Anycubic Kobra S1 0.4 nozzle.json"
@@ -704,6 +780,10 @@
 			"name": "Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PETG @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic PETG @Anycubic Kobra S1 0.4 nozzle.json"
@@ -768,6 +848,22 @@
 			"name": "Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle",
+			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA @Anycubic Kobra S1 0.4 nozzle.json"
@@ -792,6 +888,22 @@
 			"name": "Anycubic PLA @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA @Anycubic Kobra X 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA Glow @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Glow @Anycubic Kobra X 0.4 nozzle.json"
@@ -800,6 +912,10 @@
 			"name": "Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle.json"
@@ -824,10 +940,26 @@
 			"name": "Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA Matte @Anycubic Kobra S1 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra S1 Max 0.4 nozzle.json"
@@ -844,10 +976,30 @@
 			"name": "Anycubic PLA Matte @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra X 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle.json"
@@ -868,6 +1020,10 @@
 			"name": "Anycubic PLA Silk @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra X 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA Translucent @Anycubic Kobra S1 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Translucent @Anycubic Kobra S1 Max 0.4 nozzle.json"
@@ -980,6 +1136,10 @@
 			"name": "Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "filament/Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic TPU @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic TPU @Anycubic Kobra S1 0.4 nozzle.json"
@@ -1016,6 +1176,22 @@
 			"name": "Anycubic PETG @Anycubic Kobra 3 0.4 nozzle",
 			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle.json"
@@ -1174,6 +1350,22 @@
 			"name": "Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "machine/Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "Anycubic Kobra 3 V2 0.2 nozzle",
+			"sub_path": "machine/Anycubic Kobra 3 V2 0.2 nozzle.json"
+		},
+		{
+			"name": "Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "machine/Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "machine/Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "machine/Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic Kobra Max 0.4 nozzle",
 			"sub_path": "machine/Anycubic Kobra Max 0.4 nozzle.json"

resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "LXkKhWH9YcYPr3IT",
+	"filament_id": "OF223rZv",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"ABS"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"5"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"5"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"15"
+	],
+	"fan_min_speed": [
+		"1"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"0"
+	],
+	"filament_density": [
+		"1.05"
+	],
+	"filament_deretraction_speed": [
+		"80"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"70%"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"2"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"80"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"100"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"15"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"16"
+	],
+	"slow_down_min_speed": [
+		"25"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "cWBQa7XzDl3czIOs",
+	"filament_id": "OF0yFLkY",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"ASA"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"270"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"5"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"15"
+	],
+	"fan_min_speed": [
+		"1"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.04"
+	],
+	"filament_deretraction_speed": [
+		"80"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"70%"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"2"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"80"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"100"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"15"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"16"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "suyxKj9qKLtpBhhU",
+	"filament_id": "OFo6n2pB",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"5"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"15"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"0"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_deretraction_speed": [
+		"80"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"2"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"80"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"6"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"25"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,69 @@
+{
+	"type": "filament",
+	"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle",
+	"from": "system",
+	"setting_id": "0uOqeEk5YgyZH4Yy",
+	"filament_id": "OFo6n2pB",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"75"
+	],
+	"hot_plate_temp_initial_layer": [
+		"75"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"210"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"70"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,42 @@
+{
+	"type": "filament",
+	"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle",
+	"from": "system",
+	"setting_id": "OOOjWFMFhP1fMhFf",
+	"filament_id": "OFo6n2pB",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "uJRZr6orTVm79FeE",
+	"filament_id": "OFmjN2bc",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"1.6"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.2 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "udLvkeYZ9Av7GkDz",
+	"filament_id": "OFmjN2bc",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "W69H1Vca3f74FfYj",
+	"filament_id": "OFmjN2bc",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "TR27JCwXxHeVhVHN",
+	"filament_id": "OFmjN2bc",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"205"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"60"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"215"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "i0FTxiH68CKHiLLT",
+	"filament_id": "OF80Qbpq",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,258 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "XHa1HSjh0RjAo0nz",
+	"filament_id": "OF80Qbpq",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.94"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_layer_time_BRASS": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,261 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "iRVPFxNMEfkCDnMh",
+	"filament_id": "OF80Qbpq",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_max_speed_BRASS": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"fan_min_speed_BRASS": [
+		"100"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"205"
+	],
+	"nozzle_temperature_initial_layer": [
+		"215"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "itTckVFabfsVbNBK",
+	"filament_id": "OF5PtjTp",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"7.2"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"40"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"0%"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"60"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Auto Lift"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"9"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "YLxoiuRDXBWLQYw4",
+	"filament_id": "OFjVOWfJ",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"nozzle_temperature": [
+		"205"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"210"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.035"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"7"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "JwcCfY4XVCRJaDeS",
+	"filament_id": "OFCSyK66",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "Sjw7irNgwCZMfWS3",
+	"filament_id": "OFCSyK66",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.94"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"50"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "HeQwxU4T2W1V0LM3",
+	"filament_id": "OFCSyK66",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"205"
+	],
+	"nozzle_temperature_initial_layer": [
+		"210"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.035"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "H3PIqeTzjvtFQXYv",
+	"filament_id": "OFIE3vOf",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"9"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "4zmGMIi6jHJhU4c6",
+	"filament_id": "OF5F0S66",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "wLkJ1CJgdWnT4NoJ",
+	"filament_id": "OF5F0S66",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.94"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"50"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "kkcDxmDe6F9fwhoJ",
+	"filament_id": "OF5F0S66",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"205"
+	],
+	"nozzle_temperature_initial_layer": [
+		"215"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.035"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "QRl3zpmacQ8D8aNX",
+	"filament_id": "OFCp3Bgo",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "qF5SGZKoINokZfx2",
+	"filament_id": "OFFwJWea",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"7.2"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,51 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle",
+	"from": "system",
+	"setting_id": "6aUrszW2Dj8CNYIp",
+	"filament_id": "OFFwJWea",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"7.2"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_speed": [
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"pressure_advance": [
+		"0.025"
+	],
+	"slow_down_layer_time": [
+		"10"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,51 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle",
+	"from": "system",
+	"setting_id": "f8K19ebfxiXji84y",
+	"filament_id": "OFFwJWea",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"7.2"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_speed": [
+		"80"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"pressure_advance": [
+		"0.025"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,273 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "NTs7c6NqAudTl9wk",
+	"filament_id": "OF7c9fln",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"1"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_cooling_layer_time_BRASS": [
+		"100"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_max_speed_BRASS": [
+		"100"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"fan_min_speed_BRASS": [
+		"70"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_BRASS": [
+		"205"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_layer_time_BRASS": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "oSWtTJpng3ERixPJ",
+	"filament_id": "OFMsDGbs",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"TPU"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"3.2"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"0"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_deretraction_speed": [
+		"25"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"0%"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"2"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"35"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"95%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.2 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "machine",
+	"name": "Anycubic Kobra 3 V2 0.2 nozzle",
+	"inherits": "fdm_machine_common",
+	"from": "system",
+	"setting_id": "gaQ37xRo6J467j1y",
+	"instantiation": "true",
+	"printer_technology": "FFF",
+	"printer_settings_id": "Anycubic Kobra 3 V2 0.2 nozzle",
+	"printer_model": "Anycubic Kobra 3 V2",
+	"printer_variant": "0.2",
+	"nozzle_diameter": [
+		"0.2"
+	],
+	"default_print_profile": "0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle",
+	"default_filament_profile": [
+		"Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle"
+	],
+	"disable_m73": "0",
+	"gcode_flavor": "klipper",
+	"printable_area": [
+		"0x0",
+		"255x0",
+		"255x255",
+		"0x255"
+	],
+	"printable_height": "260",
+	"thumbnails": [
+		"230x110"
+	],
+	"thumbnails_format": "PNG",
+	"thumbnails_internal": [
+		"512x512/PNG/top"
+	],
+	"thumbnails_internal_switch": "1",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_custom_model": "",
+	"bed_custom_texture": "",
+	"bed_exclude_area": [],
+	"bed_mesh_max": "0,0",
+	"bed_mesh_min": "0,0",
+	"bed_mesh_probe_distance": "0,0",
+	"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G1 E-2 F2400\n;;; G1 Z{max(toolchange_z+0.6, 5.0)} F600\n;;; G1 X271.5 F12000\n;;; G1 E-5 F600\n;;; G1 X278 F600\n;;; M400 P3530\n;;; G1 E-1 F600\n;;; G1 Z{max(toolchange_z+2.6, 7.0)}  F600\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P31050\n;;; M400 P17510\n; 2\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n;;; G1 X250 F1200\n;;; M400 P0\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n; 3.1\n;;; M106 S255\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.2\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.3\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"deretraction_speed": [
+		"40"
+	],
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "250",
+	"extruder_clearance_height_to_rod": "20",
+	"extruder_clearance_radius": "65",
+	"extruder_colour": [
+		"FF4D4F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": "G92 E0\nG1 E-2 F3600\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F900 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors\n\n",
+	"machine_load_filament_time": "42",
+	"machine_max_acceleration_e": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_extruding": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_retracting": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_travel": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_x": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_y": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_z": [
+		"1000",
+		"1000",
+		"1000"
+	],
+	"machine_max_jerk_e": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_x": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_y": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_z": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_speed_e": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_x": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_y": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_z": [
+		"15",
+		"10",
+		"26"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M600",
+	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.051\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"max_layer_height": [
+		"0.14"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "107",
+	"parking_pos_retraction": "0",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"printer_flush_multiplier": "1",
+	"printer_notes": "",
+	"printer_structure": "i3",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retract_length_toolchange": [
+		"0"
+	],
+	"retract_lift_above": [
+		"0.3"
+	],
+	"retract_lift_below": [
+		"258"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_on_top_layer": [
+		"1"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"0"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"0"
+	],
+	"retraction_length": [
+		"0.8"
+	],
+	"retraction_minimum_travel": [
+		"0"
+	],
+	"retraction_speed": [
+		"40"
+	],
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "1",
+	"template_custom_gcode": "",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0"
+}

resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,251 @@
+{
+	"type": "machine",
+	"name": "Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_machine_common",
+	"from": "system",
+	"setting_id": "l49qdfdrHYEO04bV",
+	"instantiation": "true",
+	"printer_technology": "FFF",
+	"printer_settings_id": "Anycubic Kobra 3 V2 0.4 nozzle",
+	"printer_model": "Anycubic Kobra 3 V2",
+	"printer_variant": "0.4",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"default_print_profile": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"default_filament_profile": [
+		"Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"disable_m73": "0",
+	"gcode_flavor": "klipper",
+	"printable_area": [
+		"0x0",
+		"255x0",
+		"255x255",
+		"0x255"
+	],
+	"printable_height": "260",
+	"thumbnails": "230x110/PNG",
+	"thumbnails_format": "PNG",
+	"thumbnails_internal": "512x512/PNG/top",
+	"thumbnails_internal_switch": "1",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_custom_model": "",
+	"bed_custom_texture": "",
+	"bed_exclude_area": [],
+	"bed_mesh_max": "0,0",
+	"bed_mesh_min": "0,0",
+	"bed_mesh_probe_distance": "0,0",
+	"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G1 E-2 F2400\n;;; G1 Z{max(toolchange_z+0.6, 5.0)} F600\n;;; G1 X271.5 F12000\n;;; G1 E-5 F600\n;;; G1 X278 F600\n;;; M400 P3530\n;;; G1 E-1 F600\n;;; G1 Z{max(toolchange_z+2.6, 7.0)}  F600\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P31050\n;;; M400 P17510\n; 2\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n;;; G1 X250 F1200\n;;; M400 P0\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n; 3.1\n;;; M106 S255\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.2\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.3\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"deretraction_speed": [
+		"60"
+	],
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "250",
+	"extruder_clearance_height_to_rod": "20",
+	"extruder_clearance_radius": "65",
+	"extruder_colour": [
+		"FF4D4F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": "M400\nG92 E0 ; zero the extruder\nG1 E-2 F3600\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F900 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors",
+	"machine_load_filament_time": "42",
+	"machine_max_acceleration_e": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_extruding": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_retracting": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_travel": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_x": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_y": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_z": [
+		"1000",
+		"1000",
+		"1000"
+	],
+	"machine_max_jerk_e": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_x": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_y": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_z": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_speed_e": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_x": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_y": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_z": [
+		"15",
+		"10",
+		"26"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M600",
+	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.051\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"max_layer_height": [
+		"0.28"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "107",
+	"parking_pos_retraction": "0",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"printer_flush_multiplier": "1",
+	"printer_notes": "",
+	"printer_structure": "i3",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retract_length_toolchange": [
+		"0"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"259"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_on_top_layer": [
+		"1"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"0"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"0"
+	],
+	"retraction_length": [
+		"1"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "0",
+	"support_chamber_temp_control": "0",
+	"support_multi_bed_types": "1",
+	"template_custom_gcode": "",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"2"
+	],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Slope Lift"
+	],
+	"z_offset": "0"
+}

resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,251 @@
+{
+	"type": "machine",
+	"name": "Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "fdm_machine_common",
+	"from": "system",
+	"setting_id": "hQQgQT5HeCVGpBAL",
+	"instantiation": "true",
+	"printer_technology": "FFF",
+	"printer_settings_id": "Anycubic Kobra 3 V2 0.6 nozzle",
+	"printer_model": "Anycubic Kobra 3 V2",
+	"printer_variant": "0.6",
+	"nozzle_diameter": [
+		"0.6"
+	],
+	"default_print_profile": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+	"default_filament_profile": [
+		"Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"disable_m73": "0",
+	"gcode_flavor": "klipper",
+	"printable_area": [
+		"0x0",
+		"255x0",
+		"255x255",
+		"0x255"
+	],
+	"printable_height": "260",
+	"thumbnails": "230x110/PNG",
+	"thumbnails_format": "PNG",
+	"thumbnails_internal": "512x512/PNG/top",
+	"thumbnails_internal_switch": "1",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_custom_model": "",
+	"bed_custom_texture": "",
+	"bed_exclude_area": [],
+	"bed_mesh_max": "0,0",
+	"bed_mesh_min": "0,0",
+	"bed_mesh_probe_distance": "0,0",
+	"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G1 E-2 F2400\n;;; G1 Z{max(toolchange_z+0.6, 5.0)} F600\n;;; G1 X271.5 F12000\n;;; G1 E-5 F600\n;;; G1 X278 F600\n;;; M400 P3530\n;;; G1 E-1 F600\n;;; G1 Z{max(toolchange_z+2.6, 7.0)}  F600\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P31050\n;;; M400 P17510\n; 2\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n;;; G1 X250 F1200\n;;; M400 P0\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n; 3.1\n;;; M106 S255\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.2\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.3\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"deretraction_speed": [
+		"30"
+	],
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "250",
+	"extruder_clearance_height_to_rod": "20",
+	"extruder_clearance_radius": "65",
+	"extruder_colour": [
+		"FF4D4F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-1 F3600 ; retract\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F600 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors\n\n",
+	"machine_load_filament_time": "42",
+	"machine_max_acceleration_e": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_extruding": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_retracting": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_travel": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_x": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_y": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_z": [
+		"1000",
+		"1000",
+		"1000"
+	],
+	"machine_max_jerk_e": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_x": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_y": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_z": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_speed_e": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_x": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_y": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_z": [
+		"15",
+		"10",
+		"26"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M600",
+	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.05\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"max_layer_height": [
+		"0.42"
+	],
+	"min_layer_height": [
+		"0.12"
+	],
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "107",
+	"parking_pos_retraction": "0",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"printer_flush_multiplier": "1",
+	"printer_notes": "",
+	"printer_structure": "i3",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retract_length_toolchange": [
+		"0"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"259"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_on_top_layer": [
+		"1"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"0"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"0"
+	],
+	"retraction_length": [
+		"0.8"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"30"
+	],
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "1",
+	"template_custom_gcode": "",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"2"
+	],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0"
+}

resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "machine",
+	"name": "Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "fdm_machine_common",
+	"from": "system",
+	"setting_id": "LBhbohm7o4jW6OYw",
+	"instantiation": "true",
+	"printer_technology": "FFF",
+	"printer_settings_id": "Anycubic Kobra 3 V2 0.8 nozzle",
+	"printer_model": "Anycubic Kobra 3 V2",
+	"printer_variant": "0.8",
+	"nozzle_diameter": [
+		"0.8"
+	],
+	"default_print_profile": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+	"default_filament_profile": [
+		"Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"disable_m73": "0",
+	"gcode_flavor": "klipper",
+	"printable_area": [
+		"0x0",
+		"255x0",
+		"255x255",
+		"0x255"
+	],
+	"printable_height": "260",
+	"thumbnails": [
+		"230x110"
+	],
+	"thumbnails_format": "PNG",
+	"thumbnails_internal": [
+		"512x512/PNG/top"
+	],
+	"thumbnails_internal_switch": "1",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_custom_model": "",
+	"bed_custom_texture": "",
+	"bed_exclude_area": [],
+	"bed_mesh_max": "0,0",
+	"bed_mesh_min": "0,0",
+	"bed_mesh_probe_distance": "0,0",
+	"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G1 E-2 F2400\n;;; G1 Z{max(toolchange_z+0.6, 5.0)} F600\n;;; G1 X271.5 F12000\n;;; G1 E-5 F600\n;;; G1 X278 F600\n;;; M400 P3530\n;;; G1 E-1 F600\n;;; G1 Z{max(toolchange_z+2.6, 7.0)}  F600\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P31050\n;;; M400 P17510\n; 2\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n;;; G1 X250 F1200\n;;; M400 P0\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n; 3.1\n;;; M106 S255\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.2\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.3\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"deretraction_speed": [
+		"0"
+	],
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "250",
+	"extruder_clearance_height_to_rod": "20",
+	"extruder_clearance_radius": "65",
+	"extruder_colour": [
+		"FF4D4F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-2 F3000 ; retract\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F600 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors\n\n",
+	"machine_load_filament_time": "42",
+	"machine_max_acceleration_e": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_extruding": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_retracting": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_travel": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_x": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_y": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_z": [
+		"1000",
+		"1000",
+		"1000"
+	],
+	"machine_max_jerk_e": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_x": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_y": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_z": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_speed_e": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_x": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_y": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_z": [
+		"15",
+		"10",
+		"26"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M600",
+	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.051\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"max_layer_height": [
+		"0.56"
+	],
+	"min_layer_height": [
+		"0.16"
+	],
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "107",
+	"parking_pos_retraction": "0",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"printer_flush_multiplier": "1",
+	"printer_notes": "",
+	"printer_structure": "i3",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retract_length_toolchange": [
+		"0"
+	],
+	"retract_lift_above": [
+		"0.3"
+	],
+	"retract_lift_below": [
+		"259.6"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_on_top_layer": [
+		"1"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"0"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"0"
+	],
+	"retraction_length": [
+		"1"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"40"
+	],
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "1",
+	"template_custom_gcode": "",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"2"
+	],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0"
+}

resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2.json

@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "machine_tech": "FFF",
+    "family": "Anycubic",
+    "name": "Anycubic Kobra 3 V2",
+    "model_id": "Anycubic Kobra 3 V2",
+    "nozzle_diameter": "0.4;0.2;0.6;0.8",
+    "bed_model": "Anycubic Kobra 3 V2_buildplate_model.stl",
+    "bed_texture": "Anycubic Kobra 3 V2_buildplate_texture.svg",
+    "hotend_model": "",
+    "default_materials": "Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle;Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle;Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle;Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle"
+}

resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,289 @@
+{
+	"type": "process",
+	"name": "0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "9yiDozcVDSxKkz4V",
+	"instantiation": "true",
+	"print_settings_id": "0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"layer_height": "0.08",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "7",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "5000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "250",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "45",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "45",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "6000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "350",
+	"interface_shells": "0",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "200",
+	"ironing_angle": "-1",
+	"ironing_flow": "8%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "3",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "200",
+	"overhang_1_4_speed": "60",
+	"overhang_2_4_speed": "30",
+	"overhang_3_4_speed": "10",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "10000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "grid",
+	"sparse_infill_speed": "450",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.08",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.42",
+	"support_object_xy_distance": "60%",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "15",
+	"support_top_z_distance": "0.08",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "9",
+	"top_shell_thickness": "0.8",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "200",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "350",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "40",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "5",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_extruder": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle.json

@@ -0,0 +1,289 @@
+{
+	"type": "process",
+	"name": "0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "eSyZsnWMuOyokoLr",
+	"instantiation": "true",
+	"print_settings_id": "0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle",
+	"layer_height": "0.1",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.2 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "50%",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "outer_only",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "10",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.075",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "0",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "100",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400",
+	"infill_anchor_max": "10",
+	"infill_combination": "0",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "30",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.25",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.1",
+	"initial_layer_speed": "30",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "6000",
+	"inner_wall_jerk": "10",
+	"inner_wall_line_width": "0.22",
+	"inner_wall_speed": "150",
+	"interface_shells": "0",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "100%",
+	"internal_solid_infill_line_width": "0.22",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "120",
+	"ironing_angle": "-1",
+	"ironing_flow": "15%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.22",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "5",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "10",
+	"outer_wall_line_width": "0.22",
+	"outer_wall_speed": "80",
+	"overhang_1_4_speed": "60",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "2",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "100%",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "0",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "20",
+	"seam_slope_start_height": "0",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "100%",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.22",
+	"sparse_infill_pattern": "3dhoneycomb",
+	"sparse_infill_speed": "150",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.1",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.22",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "40",
+	"support_top_z_distance": "0.1",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "25%",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.22",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "120",
+	"travel_acceleration": "15000",
+	"travel_jerk": "12",
+	"travel_speed": "350",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "40",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "5",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "4",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_extruder": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,58 @@
+{
+	"type": "process",
+	"name": "0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"from": "system",
+	"setting_id": "HqXRokM0mAA691LV",
+	"instantiation": "true",
+	"print_settings_id": "0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+	"layer_height": "0.12",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"bottom_shell_thickness": "0",
+	"bridge_acceleration": "2000",
+	"bridge_speed": "30",
+	"brim_type": "auto_brim",
+	"default_acceleration": "5000",
+	"default_jerk": "9",
+	"gap_infill_speed": "180",
+	"initial_layer_infill_speed": "50",
+	"initial_layer_speed": "50",
+	"inner_wall_acceleration": "4000",
+	"inner_wall_jerk": "9",
+	"inner_wall_speed": "150",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_speed": "180",
+	"ironing_flow": "10%",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_speed": "60",
+	"overhang_1_4_speed": "60",
+	"overhang_2_4_speed": "30",
+	"overhang_3_4_speed": "10",
+	"overhang_4_4_speed": "10",
+	"prime_tower_width": "35",
+	"raft_first_layer_expansion": "5",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"seam_slope_conditional": "1",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"small_perimeter_speed": "50%",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_speed": "180",
+	"support_interface_top_layers": "2",
+	"support_threshold_angle": "20",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_speed": "150",
+	"travel_acceleration": "5000",
+	"travel_jerk": "9",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wipe_on_loops": "0",
+	"wipe_tower_extra_spacing": "120%"
+}

resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,289 @@
+{
+	"type": "process",
+	"name": "0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "NCKx6glFcaEOhqZC",
+	"instantiation": "true",
+	"print_settings_id": "0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"layer_height": "0.12",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "5000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "350",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "45",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "45",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "6000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "300",
+	"interface_shells": "0",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "200",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "5",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "130",
+	"overhang_1_4_speed": "60",
+	"overhang_2_4_speed": "30",
+	"overhang_3_4_speed": "10",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "0",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "30%",
+	"small_perimeter_threshold": "0",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "10000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "3dhoneycomb",
+	"sparse_infill_speed": "430",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.12",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_interface_top_layers": "3",
+	"support_line_width": "0.42",
+	"support_object_xy_distance": "60%",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "20",
+	"support_top_z_distance": "0.12",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "0.6",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "200",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "350",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "40",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "5",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_extruder": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,51 @@
+{
+	"type": "process",
+	"name": "0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"from": "system",
+	"setting_id": "mVDCX89vYKfBA57g",
+	"instantiation": "true",
+	"print_settings_id": "0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+	"layer_height": "0.16",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"bottom_shell_thickness": "0",
+	"bridge_acceleration": "2000",
+	"default_acceleration": "4000",
+	"default_jerk": "9",
+	"infill_anchor_max": "20",
+	"initial_layer_infill_speed": "50",
+	"initial_layer_speed": "50",
+	"inner_wall_acceleration": "4000",
+	"inner_wall_jerk": "9",
+	"internal_solid_infill_acceleration": "4000",
+	"internal_solid_infill_speed": "200",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_speed": "150",
+	"overhang_1_4_speed": "60",
+	"overhang_3_4_speed": "10",
+	"overhang_4_4_speed": "10",
+	"prime_tower_width": "30",
+	"raft_first_layer_expansion": "5",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"seam_slope_conditional": "1",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"small_perimeter_speed": "50%",
+	"sparse_infill_acceleration": "4000",
+	"sparse_infill_speed": "200",
+	"support_line_width": "0.42",
+	"support_threshold_angle": "25",
+	"top_bottom_infill_wall_overlap": "15%",
+	"travel_acceleration": "4000",
+	"travel_jerk": "9",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wipe_on_loops": "0",
+	"wipe_tower_extra_spacing": "120%"
+}

resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,289 @@
+{
+	"type": "process",
+	"name": "0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "ut3FZjM7h3doFjRg",
+	"instantiation": "true",
+	"print_settings_id": "0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"layer_height": "0.16",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "5000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "250",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "45",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "45",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "6000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "200",
+	"interface_shells": "0",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "10000",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "5",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "130",
+	"overhang_1_4_speed": "60",
+	"overhang_2_4_speed": "30",
+	"overhang_3_4_speed": "10",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "0",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "30%",
+	"small_perimeter_threshold": "0",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "3dhoneycomb",
+	"sparse_infill_speed": "300",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.16",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.42",
+	"support_object_xy_distance": "60%",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "25",
+	"support_top_z_distance": "0.16",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "6",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "150",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "350",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "40",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "5",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_extruder": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,57 @@
+{
+	"type": "process",
+	"name": "0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"from": "system",
+	"setting_id": "V7T6yBxuQzWucCpA",
+	"instantiation": "true",
+	"print_settings_id": "0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+	"layer_height": "0.2",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"bottom_shell_thickness": "0",
+	"bridge_acceleration": "4000",
+	"bridge_speed": "50",
+	"brim_object_gap": "0.1",
+	"brim_width": "5",
+	"default_acceleration": "4000",
+	"default_jerk": "9",
+	"initial_layer_infill_speed": "50",
+	"initial_layer_speed": "50",
+	"inner_wall_acceleration": "4000",
+	"inner_wall_jerk": "9",
+	"inner_wall_speed": "150",
+	"internal_solid_infill_acceleration": "4000",
+	"internal_solid_infill_speed": "250",
+	"ironing_flow": "10%",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_speed": "60",
+	"overhang_4_4_speed": "10",
+	"prime_tower_width": "30",
+	"raft_first_layer_expansion": "5",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"seam_slope_conditional": "1",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"sparse_infill_acceleration": "4000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "3dhoneycomb",
+	"sparse_infill_speed": "270",
+	"support_line_width": "0.42",
+	"support_threshold_angle": "30",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_speed": "200",
+	"travel_acceleration": "4000",
+	"travel_jerk": "9",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wipe_on_loops": "0",
+	"wipe_tower_extra_spacing": "120%"
+}

resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,289 @@
+{
+	"type": "process",
+	"name": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "K5se4jnf2XHJNkEQ",
+	"instantiation": "true",
+	"print_settings_id": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"layer_height": "0.2",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "5000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "250",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "45",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "45",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "6000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "200",
+	"interface_shells": "0",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "10000",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "130",
+	"ironing_angle": "-1",
+	"ironing_flow": "15%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "5",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "130",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "0",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "30%",
+	"small_perimeter_threshold": "0",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "3dhoneycomb",
+	"sparse_infill_speed": "300",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.4",
+	"support_object_xy_distance": "60%",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_top_z_distance": "0.25",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "130",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "350",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "40",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "5",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_extruder": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,289 @@
+{
+	"type": "process",
+	"name": "0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "cg8f6Q9o8nRePSC9",
+	"instantiation": "true",
+	"print_settings_id": "0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"layer_height": "0.24",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "5000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "200",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400",
+	"infill_anchor_max": "10",
+	"infill_combination": "0",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "45",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "45",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "6000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "200",
+	"interface_shells": "0",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "10000",
+	"internal_solid_infill_line_width": "0.45",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "200",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "5",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "120",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "0",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "30%",
+	"small_perimeter_threshold": "0",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "3dhoneycomb",
+	"sparse_infill_speed": "200",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.42",
+	"support_object_xy_distance": "60%",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "35",
+	"support_top_z_distance": "0.2",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "180",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "350",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "40",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "5",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_extruder": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,24 @@
+{
+	"type": "process",
+	"name": "0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+	"from": "system",
+	"setting_id": "DhqKrBJZh4W22xna",
+	"instantiation": "true",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"print_settings_id": "0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+	"layer_height": "0.24",
+	"brim_type": "auto_brim",
+	"default_acceleration": "6000",
+	"default_jerk": "9",
+	"elefant_foot_compensation": "0.1",
+	"inner_wall_acceleration": "6000",
+	"inner_wall_jerk": "9",
+	"outer_wall_jerk": "9",
+	"raft_first_layer_expansion": "5",
+	"sparse_infill_acceleration": "6000",
+	"support_threshold_angle": "30",
+	"top_bottom_infill_wall_overlap": "15%",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9"
+}

resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,289 @@
+{
+	"type": "process",
+	"name": "0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "Qe8XQonRxfA8Jei1",
+	"instantiation": "true",
+	"print_settings_id": "0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"layer_height": "0.28",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "2000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "200",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "45",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "45",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "6000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "200",
+	"interface_shells": "0",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "10000",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "180",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "5",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "120",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "0%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "0",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "30%",
+	"small_perimeter_threshold": "0",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "grid",
+	"sparse_infill_speed": "200",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.42",
+	"support_object_xy_distance": "60%",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "40",
+	"support_top_z_distance": "0.2",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "25%",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "180",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "350",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "40",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "5",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_extruder": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,289 @@
+{
+	"type": "process",
+	"name": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "13ES5eks7VTR3G2E",
+	"instantiation": "true",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"print_settings_id": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+	"layer_height": "0.3",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "500",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "outer_only",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "5000",
+	"default_jerk": "20",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.075",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "50",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400",
+	"infill_anchor_max": "10",
+	"infill_combination": "0",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "30",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.62",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.3",
+	"initial_layer_speed": "30",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "10000",
+	"inner_wall_jerk": "15",
+	"inner_wall_line_width": "0.62",
+	"inner_wall_speed": "150",
+	"interface_shells": "0",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.62",
+	"internal_solid_infill_pattern": "monotonic",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "15%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.62",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "5",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "0",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "15",
+	"outer_wall_line_width": "0.62",
+	"outer_wall_speed": "120",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "2",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "35",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "0",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "10000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.62",
+	"sparse_infill_pattern": "3dhoneycomb",
+	"sparse_infill_speed": "100",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "3",
+	"support_line_width": "0.62",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "40",
+	"support_top_z_distance": "0.25",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "25%",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "0.6",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_acceleration": "5000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.62",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "150",
+	"travel_acceleration": "15000",
+	"travel_jerk": "12",
+	"travel_speed": "350",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "40",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "5",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_spacing": "150%",
+	"wipe_tower_extruder": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,17 @@
+{
+	"type": "process",
+	"name": "0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+	"from": "system",
+	"setting_id": "avPzsOBN3DnXTaol",
+	"instantiation": "true",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"print_settings_id": "0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+	"layer_height": "0.32",
+	"initial_layer_print_height": "0.32",
+	"inner_wall_speed": "120",
+	"outer_wall_speed": "80",
+	"overhang_2_4_speed": "40",
+	"overhang_3_4_speed": "30",
+	"top_solid_infill_flow_ratio": "0.95"
+}

resources/profiles/Anycubic/process/0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,24 @@
+{
+	"type": "process",
+	"name": "0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+	"from": "system",
+	"setting_id": "7pIVSig189FDjOMY",
+	"instantiation": "true",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"print_settings_id": "0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+	"layer_height": "0.36",
+	"brim_type": "auto_brim",
+	"default_acceleration": "6000",
+	"default_jerk": "9",
+	"elefant_foot_compensation": "0.1",
+	"inner_wall_acceleration": "6000",
+	"inner_wall_jerk": "9",
+	"outer_wall_jerk": "9",
+	"raft_first_layer_expansion": "5",
+	"sparse_infill_acceleration": "6000",
+	"support_threshold_angle": "30",
+	"top_bottom_infill_wall_overlap": "15%",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9"
+}

resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,289 @@
+{
+	"type": "process",
+	"name": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "0yxg7c5tH07ZMIL4",
+	"instantiation": "true",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"print_settings_id": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+	"layer_height": "0.4",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "5000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "outer_only",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "6000",
+	"default_jerk": "20",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "1",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "50",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400",
+	"infill_anchor_max": "10",
+	"infill_combination": "0",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "30",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.82",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.4",
+	"initial_layer_speed": "30",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "0",
+	"inner_wall_jerk": "15",
+	"inner_wall_line_width": "0.82",
+	"inner_wall_speed": "150",
+	"interface_shells": "0",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "10000",
+	"internal_solid_infill_line_width": "0.82",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "15%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.82",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "5",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "0",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "15",
+	"outer_wall_line_width": "0.82",
+	"outer_wall_speed": "120",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "25",
+	"overhang_4_4_speed": "5",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "2",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "100%",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "0",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "20",
+	"seam_slope_start_height": "0",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.82",
+	"sparse_infill_pattern": "3dhoneycomb",
+	"sparse_infill_speed": "100",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "3",
+	"support_line_width": "0.82",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "40",
+	"support_top_z_distance": "0.25",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "25%",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "0.8",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.82",
+	"top_surface_pattern": "monotonic",
+	"top_surface_speed": "150",
+	"travel_acceleration": "10000",
+	"travel_jerk": "12",
+	"travel_speed": "350",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "40",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "5",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "1.5",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_spacing": "150%",
+	"wipe_tower_extruder": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,17 @@
+{
+	"type": "process",
+	"name": "0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+	"from": "system",
+	"setting_id": "2cCCPfRX7H33XrMb",
+	"instantiation": "true",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"print_settings_id": "0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+	"layer_height": "0.48",
+	"initial_layer_print_height": "0.48",
+	"inner_wall_speed": "180",
+	"outer_wall_speed": "140",
+	"overhang_2_4_speed": "40",
+	"overhang_3_4_speed": "30",
+	"top_solid_infill_flow_ratio": "0.95"
+}

resources/profiles/BBL.json

@@ -1,7 +1,7 @@
 {
 	"name": "Bambulab",
 	"url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
-	"version": "02.01.00.28",
+	"version": "02.01.00.29",
 	"force_update": "0",
 	"description": "BBL configurations",
 	"machine_model_list": [

resources/profiles/CoLiDo.json

@@ -1,6 +1,6 @@
 {
 	"name": "CoLiDo",
-	"version": "02.04.00.05",
+	"version": "02.04.00.06",
 	"force_update": "0",
 	"description": "CoLiDo configurations",
 	"machine_model_list": [

resources/profiles/Creality.json

@@ -1,6 +1,6 @@
 {
 	"name": "Creality",
-	"version": "02.03.02.84",
+	"version": "02.03.02.85",
 	"force_update": "0",
 	"description": "Creality configurations",
 	"machine_model_list": [

resources/profiles/Creality/creality_SPARKX_buildplate_texture.svg

@@ -0,0 +1 @@
+<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 260 260"><path d="M258.54,260h-74.09c-.98,0-1.41-1.25-.62-1.85l12.39-9.46c.64-.49,1.41-.75,2.21-.75h60.11c.81,0,1.46.65,1.46,1.46v9.13c0,.81-.65,1.46-1.46,1.46ZM60.57,248.53c.67,0,1.33.22,1.86.63l12.39,9.46c.24.18.18.43.15.5-.02.07-.13.31-.43.31H18.89c-.49,0-.95-.27-1.19-.69l-5.37-9.4c-.14-.24-.04-.46,0-.54.05-.08.19-.27.47-.27h47.78M61.57,247.95H11.79c-.86,0-1.39.93-.97,1.67l5.37,9.4c.35.61.99.98,1.7.98h57.66c.98,0,1.41-1.25.62-1.85l-12.39-9.46c-.64-.49-1.41-.75-2.21-.75h0Z" style="fill:#bcbec0;"/><path d="M206.02,251.67s-.02.05-.05.05l-4.24.02c-1.25,0-2.26,1.03-2.25,2.28.02,1.24,1.05,2.22,2.28,2.22h4.21s.05.02.05.05v1.33s-.02.05-.05.05h-4.2c-2.08,0-3.78-1.71-3.72-3.79.06-1.94,1.62-3.51,3.55-3.57l4.37-.02s.05.02.05.05v1.33ZM214.8,257.67h-1.88s-.03,0-.03-.01l-4.31-4.32s0-.08.03-.08h3.78c.43,0,.78-.36.77-.8-.02-.42-.37-.74-.79-.74h-3.96s-.05.02-.05.05v5.85s-.02.05-.05.05h-1.33s-.05-.02-.05-.05v-7.29s.02-.05.05-.05h5.37c1.21,0,2.21.96,2.23,2.17.02,1.23-.97,2.23-2.19,2.23h-.45s2.89,2.9,2.89,2.9c.03.03,0,.08-.03.08ZM223.18,251.67s-.02.05-.05.05h-4.14c-1,0-1.84.65-2.15,1.54h6.28s.05.02.05.05v1.33s-.02.05-.05.05h-6.28c.3.9,1.15,1.54,2.15,1.54h4.14s.05.02.05.05v1.33s-.02.05-.05.05h-4.14c-2.04,0-3.7-1.66-3.7-3.69s1.66-3.69,3.7-3.69h4.14s.05.02.05.05v1.33ZM232.48,257.67c-.6,0-4.28,0-5.53,0-.02-.03-.02-.04-.04-.08l.77-1.33s.03-.02.04-.02h2.28s.02-.04.04-.08l-1.75-3.04h-.09l-2.61,4.52s-.03.02-.04.03h-1.53s-.02-.04-.04-.08l4.18-7.26c.04-.06.13-.06.17,0,0,0,3.73,6.48,4.18,7.26.02.03,0,.07-.04.07ZM239.25,257.62s-.02.05-.05.05h-5.3c-.45,0-.82-.37-.82-.83v-6.51s.02-.05.05-.05h1.33s.05.02.05.05v5.85s.02.05.05.05h4.64s.05.02.05.05v1.33ZM241.51,257.62s-.02.05-.05.05h-1.33s-.05-.02-.05-.05v-7.28s.02-.05.05-.05h1.33s.05.02.05.05v7.28ZM253.52,254.72s-.01.02-.01.03v2.86s-.02.05-.05.05h-1.33s-.05-.02-.05-.05v-2.86s0-.02-.01-.03l-2.51-2.99s-.02-.02-.04-.02h-2.89s-.05.02-.05.05v5.85s-.02.05-.05.05h-1.33s-.05-.02-.05-.05v-5.85s-.02-.05-.05-.05h-2.88s-.05-.02-.05-.05v-1.33s.02-.05.05-.05h7.96s.03,0,.04.02l2.53,3.02s.05.02.07,0l2.53-3.02s.02-.02.04-.02h1.74s.06.05.04.08l-3.65,4.36Z" style="fill:#393939;"/><path d="M6.64,248.53c.44,0,.84.23,1.06.62l4.83,8.44c.22.38.22.84,0,1.22s-.62.61-1.06.61H1.81c-.44,0-.84-.23-1.06-.61s-.22-.84,0-1.22l4.83-8.44c.22-.39.62-.62,1.06-.62M6.64,247.95c-.61,0-1.22.3-1.57.91l-4.83,8.44c-.69,1.2.18,2.7,1.57,2.7h9.67c1.39,0,2.25-1.5,1.57-2.7l-4.83-8.44c-.35-.61-.96-.91-1.57-.91h0Z" style="fill:#bcbec0;"/><path d="M8.03,251.42c-.67.48-.7,1.14-.09,1.98.6.83.55,1.43-.15,1.81M6.75,251.42c-.67.48-.7,1.14-.09,1.98.6.83.55,1.43-.15,1.81M5.49,251.42c-.67.48-.7,1.14-.09,1.98.6.83.55,1.43-.15,1.81M2.59,258.11h8.09M9.87,257.04H3.5M4.28,256.05h4.82" style="fill:none; stroke:#bcbec0; stroke-linecap:round; stroke-miterlimit:10; stroke-width:.61px;"/></svg>

resources/profiles/Creality/creality_ender3v4_buildplate_texture.svg

@@ -0,0 +1 @@
+<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 260 260"><path d="M258.54,260h-74.09c-.98,0-1.41-1.25-.62-1.85l12.39-9.46c.64-.49,1.41-.75,2.21-.75h60.11c.81,0,1.46.65,1.46,1.46v9.13c0,.81-.65,1.46-1.46,1.46ZM60.57,248.53c.67,0,1.33.22,1.86.63l12.39,9.46c.24.18.18.43.15.5-.02.07-.13.31-.43.31H18.89c-.49,0-.95-.27-1.19-.69l-5.37-9.4c-.14-.24-.04-.46,0-.54.05-.08.19-.27.47-.27h47.78M61.57,247.95H11.79c-.86,0-1.39.93-.97,1.67l5.37,9.4c.35.61.99.98,1.7.98h57.66c.98,0,1.41-1.25.62-1.85l-12.39-9.46c-.64-.49-1.41-.75-2.21-.75h0Z" style="fill:#bcbec0;"/><path d="M206.02,251.67s-.02.05-.05.05l-4.24.02c-1.25,0-2.26,1.03-2.25,2.28.02,1.24,1.05,2.22,2.28,2.22h4.21s.05.02.05.05v1.33s-.02.05-.05.05h-4.2c-2.08,0-3.78-1.71-3.72-3.79.06-1.94,1.62-3.51,3.55-3.57l4.37-.02s.05.02.05.05v1.33ZM214.8,257.67h-1.88s-.03,0-.03-.01l-4.31-4.32s0-.08.03-.08h3.78c.43,0,.78-.36.77-.8-.02-.42-.37-.74-.79-.74h-3.96s-.05.02-.05.05v5.85s-.02.05-.05.05h-1.33s-.05-.02-.05-.05v-7.29s.02-.05.05-.05h5.37c1.21,0,2.21.96,2.23,2.17.02,1.23-.97,2.23-2.19,2.23h-.45s2.89,2.9,2.89,2.9c.03.03,0,.08-.03.08ZM223.18,251.67s-.02.05-.05.05h-4.14c-1,0-1.84.65-2.15,1.54h6.28s.05.02.05.05v1.33s-.02.05-.05.05h-6.28c.3.9,1.15,1.54,2.15,1.54h4.14s.05.02.05.05v1.33s-.02.05-.05.05h-4.14c-2.04,0-3.7-1.66-3.7-3.69s1.66-3.69,3.7-3.69h4.14s.05.02.05.05v1.33ZM232.48,257.67c-.6,0-4.28,0-5.53,0-.02-.03-.02-.04-.04-.08l.77-1.33s.03-.02.04-.02h2.28s.02-.04.04-.08l-1.75-3.04h-.09l-2.61,4.52s-.03.02-.04.03h-1.53s-.02-.04-.04-.08l4.18-7.26c.04-.06.13-.06.17,0,0,0,3.73,6.48,4.18,7.26.02.03,0,.07-.04.07ZM239.25,257.62s-.02.05-.05.05h-5.3c-.45,0-.82-.37-.82-.83v-6.51s.02-.05.05-.05h1.33s.05.02.05.05v5.85s.02.05.05.05h4.64s.05.02.05.05v1.33ZM241.51,257.62s-.02.05-.05.05h-1.33s-.05-.02-.05-.05v-7.28s.02-.05.05-.05h1.33s.05.02.05.05v7.28ZM253.52,254.72s-.01.02-.01.03v2.86s-.02.05-.05.05h-1.33s-.05-.02-.05-.05v-2.86s0-.02-.01-.03l-2.51-2.99s-.02-.02-.04-.02h-2.89s-.05.02-.05.05v5.85s-.02.05-.05.05h-1.33s-.05-.02-.05-.05v-5.85s-.02-.05-.05-.05h-2.88s-.05-.02-.05-.05v-1.33s.02-.05.05-.05h7.96s.03,0,.04.02l2.53,3.02s.05.02.07,0l2.53-3.02s.02-.02.04-.02h1.74s.06.05.04.08l-3.65,4.36Z" style="fill:#393939;"/><path d="M6.64,248.53c.44,0,.84.23,1.06.62l4.83,8.44c.22.38.22.84,0,1.22s-.62.61-1.06.61H1.81c-.44,0-.84-.23-1.06-.61s-.22-.84,0-1.22l4.83-8.44c.22-.39.62-.62,1.06-.62M6.64,247.95c-.61,0-1.22.3-1.57.91l-4.83,8.44c-.69,1.2.18,2.7,1.57,2.7h9.67c1.39,0,2.25-1.5,1.57-2.7l-4.83-8.44c-.35-.61-.96-.91-1.57-.91h0Z" style="fill:#bcbec0;"/><path d="M8.03,251.42c-.67.48-.7,1.14-.09,1.98.6.83.55,1.43-.15,1.81M6.75,251.42c-.67.48-.7,1.14-.09,1.98.6.83.55,1.43-.15,1.81M5.49,251.42c-.67.48-.7,1.14-.09,1.98.6.83.55,1.43-.15,1.81M2.59,258.11h8.09M9.87,257.04H3.5M4.28,256.05h4.82" style="fill:none; stroke:#bcbec0; stroke-linecap:round; stroke-miterlimit:10; stroke-width:.61px;"/></svg>

resources/profiles/Creality/filament/CR-ABS @K2 Plus-all.json

@@ -46,7 +46,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"10"
+		"18"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"

resources/profiles/Creality/filament/CR-PETG @K2 Plus-all.json

@@ -40,7 +40,7 @@
 		"14"
 	],
 	"filament_density": [
-		"1.23"
+		"1.24"
 	],
 	"filament_flow_ratio": [
 		"0.95"
@@ -49,10 +49,10 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"12"
+		"18"
 	],
 	"filament_retraction_length": [
-		"0.8"
+		"1.2"
 	],
 	"filament_type": [
 		"PETG"
@@ -67,10 +67,10 @@
 		"70"
 	],
 	"nozzle_temperature": [
-		"250"
+		"240"
 	],
 	"nozzle_temperature_initial_layer": [
-		"250"
+		"240"
 	],
 	"nozzle_temperature_range_high": [
 		"270"
@@ -79,7 +79,7 @@
 		"220"
 	],
 	"overhang_fan_speed": [
-		"90"
+		"100"
 	],
 	"overhang_fan_threshold": [
 		"25%"
@@ -94,7 +94,7 @@
 		"20"
 	],
 	"temperature_vitrification": [
-		"80"
+		"60"
 	],
 	"textured_plate_temp": [
 		"70"

resources/profiles/Creality/filament/CR-PLA @K2 Plus-all.json

@@ -46,7 +46,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"16"
+		"18"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"

resources/profiles/Creality/filament/CR-PLA Fluo @K2 Plus-all.json

@@ -46,7 +46,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"16"
+		"18"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"

resources/profiles/Creality/filament/CR-PLA Matte @K2 Plus-all.json

@@ -49,7 +49,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"12"
+		"18"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"

resources/profiles/Creality/filament/CR-Silk @K2 Plus-all.json

@@ -49,7 +49,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"12"
+		"10"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
@@ -100,10 +100,10 @@
 		"50"
 	],
 	"nozzle_temperature": [
-		"230"
+		"220"
 	],
 	"nozzle_temperature_initial_layer": [
-		"230"
+		"220"
 	],
 	"nozzle_temperature_range_high": [
 		"240"

resources/profiles/Creality/filament/ENDER FAST PLA @K2 Plus-all.json

@@ -49,7 +49,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"16"
+		"23"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
@@ -155,7 +155,7 @@
 	"filament_unloading_speed_start": "100",
 	"material_flow_dependent_temperature": "0",
 	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-	"pressure_advance": "0.05",
+	"pressure_advance": "0.04",
 	"support_material_interface_fan_speed": "-1",
 	"compatible_printers": [
 		"Creality K2 Plus 0.2 nozzle",

resources/profiles/Creality/filament/HP-ASA @K2 Plus-all.json

@@ -58,7 +58,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"10"
+		"14"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"

resources/profiles/Creality/filament/Hyper PETG @K2 Plus-all.json

@@ -40,7 +40,7 @@
 		"40"
 	],
 	"filament_cost": [
-		"24.99"
+		"25"
 	],
 	"filament_density": [
 		"1.28"
@@ -52,13 +52,13 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"18"
+		"23"
 	],
 	"filament_retract_before_wipe": [
 		"100"
 	],
 	"filament_retraction_length": [
-		"0.8"
+		"1.2"
 	],
 	"filament_type": [
 		"PETG"
@@ -97,7 +97,7 @@
 		"20"
 	],
 	"temperature_vitrification": [
-		"74.3"
+		"75"
 	],
 	"textured_plate_temp": [
 		"70"
@@ -136,7 +136,7 @@
 	"filament_unloading_speed": "90",
 	"filament_unloading_speed_start": "100",
 	"material_flow_dependent_temperature": "0",
-	"pressure_advance": "0.07",
+	"pressure_advance": "0.05",
 	"support_material_interface_fan_speed": "-1",
 	"compatible_printers": [
 		"Creality K2 Plus 0.2 nozzle",

resources/profiles/Creality/filament/Hyper PLA @K2 Plus-all.json

@@ -31,7 +31,7 @@
 		"50"
 	],
 	"filament_cost": [
-		"30"
+		"20"
 	],
 	"filament_deretraction_speed": [
 		"nil"
@@ -46,7 +46,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"21"
+		"23"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
@@ -146,7 +146,7 @@
 	"filament_unloading_speed_start": "100",
 	"material_flow_dependent_temperature": "0",
 	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-	"pressure_advance": "0.04",
+	"pressure_advance": "0.044",
 	"support_material_interface_fan_speed": "-1",
 	"compatible_printers": [
 		"Creality K2 Plus 0.2 nozzle",

resources/profiles/Creality/machine/Creality Ender-3 V4.json

@@ -2,9 +2,9 @@
 	"type": "machine_model",
 	"name": "Creality Ender-3 V4",
 	"nozzle_diameter": "0.4",
-	"bed_model": "creality_ender3v3_buildplate_model.stl",
+	"bed_model": "creality_ender3v4_buildplate_model.stl",
 	"default_bed_type": "Textured PEI Plate",
-	"bed_texture": "creality_ender3v3_buildplate_texture.svg",
+	"bed_texture": "creality_ender3v4_buildplate_texture.svg",
 	"family": "Creality",
 	"hotend_model": "",
 	"machine_tech": "FFF",

resources/profiles/Creality/machine/Creality SPARKX i7.json

@@ -4,7 +4,7 @@
 	"nozzle_diameter": "0.8;0.6;0.4;0.2",
 	"bed_model": "creality_SPARKX_buildplate_model.stl",
 	"default_bed_type": "Textured PEI Plate",
-	"bed_texture": "creality_hi_buildplate_texture.svg",
+	"bed_texture": "creality_SPARKX_buildplate_texture.svg",
 	"family": "Creality",
 	"hotend_model": "",
 	"machine_tech": "FFF",

resources/profiles/Cubicon.json

@@ -1,6 +1,6 @@
 {
 	"name": "Cubicon",
-	"version": "02.04.00.06",
+	"version": "02.04.00.07",
 	"force_update": "0",
 	"description": "Cubicon configurations",
 	"machine_model_list": [

resources/profiles/Elegoo.json

@@ -1,6 +1,6 @@
 {
 	"name": "Elegoo",
-	"version": "02.04.00.09",
+	"version": "02.04.00.10",
 	"force_update": "0",
 	"description": "Elegoo configurations",
 	"machine_model_list": [

resources/profiles/Flashforge.json

@@ -1,7 +1,7 @@
 {
 	"name": "Flashforge",
 	"url": "",
-	"version": "02.04.00.09",
+	"version": "02.04.00.10",
 	"force_update": "0",
 	"description": "Flashforge configurations",
 	"machine_model_list": [

resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro.json

@@ -6,7 +6,7 @@
 	"machine_tech": "FFF",
 	"family": "Flashforge",
 	"bed_model": "flashforge_c5_buildplate_model.stl",
-	"bed_texture": "flashforge_c5_buildplate_texture.png",
+	"bed_texture": "flashforge_c5_buildplate_texture.svg",
 	"hotend_model": "",
 	"default_materials": "Generic PLA @System;Generic PLA @FF C5P"
 }

resources/profiles/Flashforge/machine/Flashforge Creator 5.json

@@ -6,7 +6,7 @@
 	"machine_tech": "FFF",
 	"family": "Flashforge",
 	"bed_model": "flashforge_c5_buildplate_model.stl",
-	"bed_texture": "flashforge_c5_buildplate_texture.png",
+	"bed_texture": "flashforge_c5_buildplate_texture.svg",
 	"hotend_model": "",
 	"default_materials": "Generic PLA @System;Generic PLA @FF C5"
 }