Lock Config and Preset Files Across Instances and Write Them Atomically

Every running instance shares one OrcaSlicer.conf and one user preset
tree, and nothing kept their writers apart. Two instances saving at the
same moment, or the cloud preset sync thread writing while the GUI thread
saved, could interleave, and a reader in another instance could open a
preset JSON or .info file between truncate and close and get a partial
file, dropping that preset for the session with a parse error.

Add InstanceLock, a scoped guard that serialises the threads of one
process through a recursive mutex and other processes through an advisory
OS file lock: flock on POSIX, held on the guard's own descriptor so no
other close in the process can drop it, and LockFileEx on Windows. The
outermost guard opens the lock file and closes it on release, so nothing
stays open between saves and a data dir can be removed once nothing is
saving into it; the file itself is kept, since deleting it would let a
third instance lock a fresh file while the second still holds the old
one. It is best effort: when the lock file cannot be opened or locked, or
another instance still holds it after a second, the guard logs once and
lets the write proceed, then leaves the file alone for ten seconds, so
a hung instance never blocks every other one and a holder stuck in a
debugger does not cost a stall per save. The guard sits at the leaf
readers and writers: set_sync_info_and_save() calls save_info() under
the preset collection mutex, so a batch lock around save_user_presets()
would invert the order against the sync thread. The preset scan takes
the guard per file rather than across the scan, so a save never waits
for the whole scan. Read-only scans, which is what the CLI does, take no
lock and create no lock file.

AppConfig holds OrcaSlicer.conf.lock in load() and save(); load is
included because the Windows path restores from the .bak copy. Every
user preset writer and reader holds user.lock: Preset::save(), which
writes no .info when the preset itself could not be written, since an
.info without its preset reads as a cloud deletion request, save_info(),
reload() and remove_files(), each file read by the preset scan, the
bundle metadata reads and write, the .info removal after a cloud-confirmed
delete, the orphaned-.info scan on the sync thread, the bundle folder
removal on unsubscribe and the physical printer writers and delete
paths. A bundle import extracts under cache/ into a folder per process
and per import, where no scan reads.

Preset JSON, .info, bundle metadata, physical printer and config files,
and the caches and state files that already used a temporary by hand,
now go through write_file_atomically(), which writes <file>.<pid>.<n>.tmp
beside the target and renames it over, so a reader that never waits sees
a complete old or new file. A symlink is followed; a target that is not
a regular file is written in place; and when no temporary can be created
beside an existing target, or the rename itself is refused, by a Windows
reader holding the file open or a mount that cannot replace in one step,
the helper writes in place as before, since losing the save is worse
than a torn read. On POSIX the rename replaces the
target atomically where the old code removed it first and left a window
with no file at all; only a mount that refuses a one-step replace gets
the old remove-then-rename. A crash between temporary and rename leaves
the temporary behind, which no scan reads. A failed config write keeps
the config dirty, and the idle handler waits ten seconds before retrying
while an explicit save always tries.

src/libslic3r/AppConfig.cpp

@@ -5,6 +5,7 @@
 //BBS
 #include "Preset.hpp"
 #include "Exception.hpp"
+#include "InstanceLock.hpp"
 #include "LocalesUtils.hpp"
 #include "Thread.hpp"
 #include "format.hpp"
@@ -730,10 +731,13 @@ static bool verify_config_file_checksum(boost::nowide::ifstream &ifs)
 
 
 #ifdef USE_JSON_CONFIG
-std::string AppConfig::load()
+std::string AppConfig::load(bool read_only)
 {
     json j;
 
+    // Keep another instance from replacing or restoring the file mid-read.
+    InstanceLock instance_lock(read_only ? std::string() : lock_path());
+
     // 1) Read the complete config file into a boost::property_tree.
     namespace pt = boost::property_tree;
     pt::ptree tree;
@@ -983,7 +987,6 @@ void AppConfig::save()
     // The config is first written to a file with a PID suffix and then moved
     // to avoid race conditions with multiple instances of Slic3r
     const auto path = config_path();
-    std::string path_pid = (boost::format("%1%.%2%") % path % get_current_pid()).str();
 
     json j;
 
@@ -1113,43 +1116,18 @@ void AppConfig::save()
 
         j["local_machines"][local_machine.first] = m_json;
     }
-    boost::nowide::ofstream c;
+    const std::string config_str = j.dump(1, '\t');
-    c.open(path_pid, std::ios::out | std::ios::trunc);
+    if (write_config_file(path, config_str + "\n", config_str))
-    c << j.dump(1, '\t') << std::endl;
+        m_dirty = false;
-
-#ifdef WIN32
-    // WIN32 specific: The final "rename_file()" call is not safe in case of an application crash, there is no atomic "rename file" API
-    // provided by Windows (sic!). Therefore we save a MD5 checksum to be able to verify file corruption. In addition,
-    // we save the config file into a backup first before moving it to the final destination.
-    c << appconfig_md5_hash_line(j.dump(1, '\t'));
-#endif
-
-    c.close();
-    if (c.fail()) {
-      BOOST_LOG_TRIVIAL(error) << "Failed to write new configuration to " << path_pid << "; aborting attempt to overwrite original configuration";
-      return;
-    }
-
-#ifdef WIN32
-    // Make a backup of the configuration file before copying it to the final destination.
-    std::string error_message;
-    std::string backup_path = (boost::format("%1%.bak") % path).str();
-    // Copy configuration file with PID suffix into the configuration file with "bak" suffix.
-    if (copy_file(path_pid, backup_path, error_message, false) != SUCCESS)
-        BOOST_LOG_TRIVIAL(error) << "Copying from " << path_pid << " to " << backup_path << " failed. Failed to create a backup configuration.";
-#endif
-
-    // Rename the config atomically.
-    // On Windows, the rename is likely NOT atomic, thus it may fail if PrusaSlicer crashes on another thread in the meanwhile.
-    // To cope with that, we already made a backup of the config on Windows.
-    rename_file(path_pid, path);
-    m_dirty = false;
 }
 
 #else
 
-std::string AppConfig::load()
+std::string AppConfig::load(bool read_only)
 {
+    // Keep another instance from replacing or restoring the file mid-read.
+    InstanceLock instance_lock(read_only ? std::string() : lock_path());
+
     // 1) Read the complete config file into a boost::property_tree.
     namespace pt = boost::property_tree;
     pt::ptree tree;
@@ -1287,7 +1265,6 @@ void AppConfig::save()
     // The config is first written to a file with a PID suffix and then moved
     // to avoid race conditions with multiple instances of Slic3r
     const auto path = config_path();
-    std::string path_pid = (boost::format("%1%.%2%") % path % get_current_pid()).str();
 
     std::stringstream config_ss;
     if (m_mode == EAppMode::Editor)
@@ -1323,39 +1300,39 @@ void AppConfig::save()
     // One empty line before the MD5 sum.
     config_ss << std::endl;
 
-    std::string config_str = config_ss.str();
+    const std::string config_str = config_ss.str();
-    boost::nowide::ofstream c;
+    if (write_config_file(path, config_str, config_str))
-    c.open(path_pid, std::ios::out | std::ios::trunc);
+        m_dirty = false;
-    c << config_str;
-#ifdef WIN32
-    // WIN32 specific: The final "rename_file()" call is not safe in case of an application crash, there is no atomic "rename file" API
-    // provided by Windows (sic!). Therefore we save a MD5 checksum to be able to verify file corruption. In addition,
-    // we save the config file into a backup first before moving it to the final destination.
-    c << appconfig_md5_hash_line(config_str);
-#endif
-    c.close();
-    if (c.fail()) {
-      BOOST_LOG_TRIVIAL(error) << "Failed to write new configuration to " << path_pid << "; aborting attempt to overwrite original configuration";
-      return;
-    }
-
-#ifdef WIN32
-    // Make a backup of the configuration file before copying it to the final destination.
-    std::string error_message;
-    std::string backup_path = (boost::format("%1%.bak") % path).str();
-    // Copy configuration file with PID suffix into the configuration file with "bak" suffix.
-    if (copy_file(path_pid, backup_path, error_message, false) != SUCCESS)
-        BOOST_LOG_TRIVIAL(error) << "Copying from " << path_pid << " to " << backup_path << " failed. Failed to create a backup configuration.";
-#endif
-
-    // Rename the config atomically.
-    // On Windows, the rename is likely NOT atomic, thus it may fail if PrusaSlicer crashes on another thread in the meanwhile.
-    // To cope with that, we already made a backup of the config on Windows.
-    rename_file(path_pid, path);
-    m_dirty = false;
 }
 #endif
 
+bool AppConfig::write_config_file(const std::string &path, std::string body, const std::string &checksum_source)
+{
+    // Everything before this is assembly; only the writes need the other instances kept out.
+    InstanceLock instance_lock(lock_path());
+#ifdef WIN32
+    // WIN32 specific: the final replace is not safe in case of an application crash, there is no atomic "rename file" API
+    // provided by Windows (sic!). Therefore we save a MD5 checksum to be able to verify file corruption. In addition,
+    // we save the config file into a backup first before moving it to the final destination.
+    body += appconfig_md5_hash_line(checksum_source);
+#endif
+    // Not flushed to the device: the idle handler saves on the GUI thread after
+    // any change, and the rename already gives a complete old or new file.
+    if (const std::error_code ec = write_file_atomically(path, body)) {
+        BOOST_LOG_TRIVIAL(error) << "Failed to write the configuration " << path << ": " << ec.message() << "; trying again in 10 s";
+        m_retry_save_at = std::chrono::steady_clock::now() + std::chrono::seconds(10);
+        return false;
+    }
+    m_retry_save_at = {};
+#ifdef WIN32
+    // Written after the config, so the backup never holds a state that was not confirmed written.
+    const std::string backup_path = (boost::format("%1%.bak") % path).str();
+    if (const std::error_code ec = write_file_atomically(backup_path, body))
+        BOOST_LOG_TRIVIAL(error) << "Failed to write the backup configuration " << backup_path << ": " << ec.message();
+#endif
+    return true;
+}
+
 bool AppConfig::get_variant(const std::string &vendor, const std::string &model, const std::string &variant) const
 {
     const auto it_v = m_vendors.find(vendor);
@@ -1844,6 +1821,11 @@ void AppConfig::reset_selections()
     }
 }
 
+std::string AppConfig::lock_path()
+{
+    return Slic3r::data_dir().empty() ? std::string() : config_path() + ".lock";
+}
+
 std::string AppConfig::config_path()
 {
 #ifdef USE_JSON_CONFIG
@@ -1880,7 +1862,7 @@ bool AppConfig::exists()
 
 std::string AppConfig::load_if_exists()
 {
-    return boost::filesystem::exists(loading_path()) ? load() : std::string();
+    return boost::filesystem::exists(loading_path()) ? load(/*read_only=*/true) : std::string();
 }
 
 }; // namespace Slic3r

src/libslic3r/AppConfig.hpp

@@ -2,6 +2,7 @@
 #define slic3r_AppConfig_hpp_
 
 #include <set>
+#include <chrono>
 #include <map>
 #include <string>
 #include "nlohmann/json.hpp"
@@ -121,14 +122,18 @@ public:
 
 	// Load the slic3r.ini from a user profile directory (or a datadir, if configured).
 	// Return an error string, or an empty string on success.
-	std::string         load();
+	std::string         load(bool read_only = false);
 	// Treat a missing config as default state; otherwise load it normally.
+	// The CLI's load: it never saves, so it takes no lock and creates no lock file.
 	std::string         load_if_exists();
 	// Store the slic3r.ini into a user profile directory (or a datadir, if configured).
 	void 			   	save();
 
 	// Does this config need to be saved?
 	bool 				dirty() const { return m_dirty; }
+	// False for ten seconds after a failed write, so the idle handler does not
+	// repeat a hopeless attempt on every event; an explicit save() always tries.
+	bool 				save_due() const { return std::chrono::steady_clock::now() >= m_retry_save_at; }
 
 
 	void				set_dirty() { m_dirty = true; }
@@ -338,6 +343,8 @@ public:
 
 	// Get the default config path from Slic3r::data_dir().
 	std::string			config_path();
+	// Lock file guarding config_path() against other running instances; empty without a data dir.
+	std::string			lock_path();
 
 	// Returns true if the user's data directory comes from before Slic3r 1.40.0 (no updating)
 	bool 				legacy_datadir() const { return m_legacy_datadir; }
@@ -448,8 +455,16 @@ private:
 
 	// Preset for each machine
 	MachineSettingMap											m_printer_settings;
+	// Writes the assembled config text, and on Windows its checksum and a backup copy; false when the
+	// config itself could not be written, in which case the caller stays dirty and retries. `checksum_source`
+	// is the text load() will verify, which for the JSON config ends before the trailing newline.
+	bool												write_config_file(const std::string &path, std::string body, const std::string &checksum_source);
+
 	// Has any value been modified since the config.ini has been last saved or loaded?
 	bool														m_dirty;
+	// After a failed write, save_due() is false for the next ten seconds, so the
+	// idle handler does not repeat a hopeless write on every event.
+	std::chrono::steady_clock::time_point						m_retry_save_at{};
 	// Original version found in the ini file before it was overwritten
 	Semver                                                      m_orig_version;
 	// Whether the existing version is before system profiles & configuration updating

src/libslic3r/CMakeLists.txt

@@ -304,6 +304,8 @@ set(lisbslic3r_sources
     Geometry/VoronoiUtils.cpp
     Geometry/VoronoiUtils.hpp
     Geometry/VoronoiVisualUtils.hpp
+    InstanceLock.cpp
+    InstanceLock.hpp
     Int128.hpp
     KDTreeIndirect.hpp
     Layer.cpp

src/libslic3r/Config.cpp

@@ -1522,12 +1522,10 @@ void ConfigBase::save_to_json(const std::string &file, const std::string &name,
     // Serialize first: if that throws (invalid UTF-8), the existing file stays untouched.
     std::ostringstream ss;
     this->save_to_json(ss, name, from, version);
-    boost::nowide::ofstream c;
+    if (const std::error_code ec = write_file_atomically(file, ss.str()))
-    c.open(file, std::ios::out | std::ios::trunc);
+        BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": failed to save config to %1%: %2%") % file % ec.message();
-    c << ss.str();
+    else
-    c.close();
+        BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ":" <<__LINE__ << boost::format(", saved config to %1%\n")%file;
-
-    BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ":" <<__LINE__ << boost::format(", saved config to %1%\n")%file;
 }
 
 void ConfigBase::save_to_json(std::ostream &os, const std::string &name, const std::string &from, const std::string &version, bool replace_invalid_utf8) const

src/libslic3r/InstanceLock.cpp

@@ -0,0 +1,165 @@
+#include "InstanceLock.hpp"
+
+#include <map>
+#include <memory>
+#include <system_error>
+#include <thread>
+
+#include <boost/filesystem.hpp>
+#include <boost/log/trivial.hpp>
+#include <boost/nowide/fstream.hpp>
+#ifdef _WIN32
+#include <boost/interprocess/sync/file_lock.hpp>
+#include <boost/nowide/convert.hpp>
+#else
+#include <cerrno>
+#include <fcntl.h>
+#include <sys/file.h>
+#include <unistd.h>
+#endif
+
+namespace Slic3r {
+
+#ifdef _WIN32
+// LockFileEx, held by this handle alone.
+using NativeFileLock = boost::interprocess::file_lock;
+#else
+// flock(2) rather than an fcntl lock: it belongs to this open file description,
+// so any other code in the process that opens and closes the lock file, as a
+// backup or an export walking the data dir might, cannot drop it. An fcntl
+// lock would go with the first such close.
+class NativeFileLock
+{
+public:
+    explicit NativeFileLock(const char *path) : m_fd(::open(path, O_RDWR | O_CREAT | O_CLOEXEC, 0644))
+    {
+        if (m_fd < 0)
+            throw std::system_error(errno, std::generic_category(), path);
+    }
+    ~NativeFileLock() { ::close(m_fd); }
+    bool try_lock()
+    {
+        if (::flock(m_fd, LOCK_EX | LOCK_NB) == 0)
+            return true;
+        // A signal (a child exiting, for one) interrupts the call like any other; the caller polls again.
+        if (errno == EWOULDBLOCK || errno == EINTR)
+            return false;
+        throw std::system_error(errno, std::generic_category(), "flock");
+    }
+    void unlock() { ::flock(m_fd, LOCK_UN); }
+private:
+    int m_fd;
+};
+#endif
+
+// One slot per lock file, shared by every guard in the process: one lock
+// object per path behind a mutex is what makes the guard re-entrant and safe
+// to use from the preset sync thread and the GUI thread at once. The lock
+// file is opened by the outermost guard and closed when it goes, so the file
+// is never held open between guards: whatever is at the path is what gets
+// locked, and a data dir can be removed once nothing is saving into it. The
+// file is kept rather than deleted on release because the lock state lives in
+// the kernel on the open file, and deleting it would let a third instance
+// lock a fresh file while the second still holds the old one.
+struct InstanceLock::Slot
+{
+    std::recursive_mutex mutex;
+    // Non-null exactly while this process holds the file lock.
+    std::unique_ptr<NativeFileLock> file_lock;
+    int  depth{0};
+    // Until this point, after a guard could not open, lock or wait out the
+    // file, guards do not touch it.
+    std::chrono::steady_clock::time_point cooldown_until{};
+};
+
+InstanceLock::Slot &InstanceLock::slot_for(const std::string &lock_file_path)
+{
+    // Never freed: a save during static destruction still needs its slot.
+    static auto *registry_mutex = new std::mutex();
+    static auto *registry       = new std::map<std::string, std::unique_ptr<Slot>>();
+
+    std::lock_guard<std::mutex> guard(*registry_mutex);
+    std::unique_ptr<Slot> &slot = (*registry)[lock_file_path];
+    if (! slot)
+        slot = std::make_unique<Slot>();
+    return *slot;
+}
+
+// Starts the cool-down. Called with the slot mutex held.
+void InstanceLock::defer(Slot &slot, const std::string &reason)
+{
+    slot.cooldown_until = std::chrono::steady_clock::now() + cooldown;
+    BOOST_LOG_TRIVIAL(warning) << reason << "; proceeding without the lock for the next " << cooldown.count() << " ms";
+}
+
+// Creates the lock file if needed and opens it, or starts the cool-down.
+// Called with the slot mutex held.
+bool InstanceLock::open_lock_file(Slot &slot, const std::string &lock_file_path)
+{
+    try {
+#ifdef _WIN32
+        // The lock opens an existing file; created once, on the first miss.
+        const std::wstring wide_path = boost::nowide::widen(lock_file_path);
+        try {
+            slot.file_lock = std::make_unique<NativeFileLock>(wide_path.c_str());
+        } catch (const std::exception &) {
+            boost::nowide::ofstream(lock_file_path, std::ios::app).close();
+            slot.file_lock = std::make_unique<NativeFileLock>(wide_path.c_str());
+        }
+#else
+        slot.file_lock = std::make_unique<NativeFileLock>(lock_file_path.c_str());
+#endif
+        return true;
+    } catch (const std::exception &e) {
+        defer(slot, "Cannot open lock file " + lock_file_path + ": " + e.what() + " (check its owner and permissions)");
+        return false;
+    }
+}
+
+InstanceLock::InstanceLock(const std::string &lock_file_path, std::chrono::milliseconds timeout)
+{
+    if (lock_file_path.empty())
+        return;
+    m_slot       = &slot_for(lock_file_path);
+    m_slot_guard = std::unique_lock<std::recursive_mutex>(m_slot->mutex);
+    const auto now = std::chrono::steady_clock::now();
+    if (m_slot->depth == 0 && now >= m_slot->cooldown_until && open_lock_file(*m_slot, lock_file_path)) {
+        const auto deadline = now + timeout;
+        bool       taken    = false;
+        for (;;) {
+            try {
+                if ((taken = m_slot->file_lock->try_lock()))
+                    break;
+            } catch (const std::exception &e) {
+                defer(*m_slot, "Cannot lock " + lock_file_path + ": " + e.what());
+                break;
+            }
+            if (std::chrono::steady_clock::now() >= deadline) {
+                defer(*m_slot, "Another instance has held " + lock_file_path + " for over " + std::to_string(timeout.count()) + " ms");
+                break;
+            }
+            std::this_thread::sleep_for(std::chrono::milliseconds(5));
+        }
+        if (! taken)
+            m_slot->file_lock.reset();
+    }
+    // Counted last, so a throw above leaves the slot exactly as it was found.
+    ++ m_slot->depth;
+    m_locked = m_slot->file_lock != nullptr;
+}
+
+InstanceLock::~InstanceLock()
+{
+    if (m_slot == nullptr)
+        return;
+    if (-- m_slot->depth == 0 && m_slot->file_lock) {
+        try {
+            m_slot->file_lock->unlock();
+        } catch (const std::exception &e) {
+            BOOST_LOG_TRIVIAL(warning) << "Cannot unlock instance lock: " << e.what();
+        }
+        m_slot->file_lock.reset();
+    }
+}
+
+} // namespace Slic3r

src/libslic3r/InstanceLock.hpp

@@ -0,0 +1,60 @@
+#pragma once
+
+#include <chrono>
+#include <mutex>
+#include <string>
+
+namespace Slic3r {
+
+// Scoped write lock on a file shared by every running instance of the
+// application, such as the app config or the user preset directory: threads
+// of this process are serialised through a recursive mutex, other processes
+// through an advisory OS file lock on `lock_file_path`. The lock file is
+// created on first use and kept; the OS releases the lock when its holder
+// exits, so a crashed instance never leaves a stale lock behind.
+//
+// Best effort: when the lock file cannot be opened or locked, or another
+// instance still holds it after `timeout`, the guard keeps only the in-process
+// mutex, locked() reports false and the write proceeds, since a hung instance
+// must never block another one from saving. For `cooldown` afterwards guards
+// leave the file alone. The wait for the in-process mutex is bounded only by
+// the longest critical section, so a guard covers a few file operations and
+// nothing slower.
+//
+// Lock order: the preset collection mutex may be held when a guard is taken
+// (set_sync_info_and_save() calls save_info() under it), never the reverse;
+// that is why the guards sit at the leaf readers and writers and why a guard
+// must not be added around save_user_presets(), which takes the collection
+// mutex through delete_preset().
+class InstanceLock
+{
+public:
+    // Long against a critical section of milliseconds, short against the GUI
+    // thread, which is where most guards are taken.
+    static constexpr std::chrono::milliseconds default_timeout{1000};
+    // Long enough that a holder stuck in a debugger does not cost a stall per
+    // save; mutable so tests can shorten it.
+    static inline std::chrono::milliseconds cooldown{10000};
+
+    // An empty path makes the guard a no-op.
+    explicit InstanceLock(const std::string &lock_file_path, std::chrono::milliseconds timeout = default_timeout);
+    ~InstanceLock();
+
+    InstanceLock(const InstanceLock &) = delete;
+    InstanceLock &operator=(const InstanceLock &) = delete;
+
+    // True while this process holds the cross-process file lock.
+    bool locked() const { return m_locked; }
+
+private:
+    struct Slot;
+    static Slot &slot_for(const std::string &lock_file_path);
+    static bool  open_lock_file(Slot &slot, const std::string &lock_file_path);
+    static void  defer(Slot &slot, const std::string &reason);
+
+    Slot *m_slot{nullptr};
+    std::unique_lock<std::recursive_mutex> m_slot_guard;
+    bool  m_locked{false};
+};
+
+} // namespace Slic3r

src/libslic3r/Preset.cpp

@@ -48,6 +48,9 @@
 
 #include "libslic3r.h"
 #include "Utils.hpp"
+#include "InstanceLock.hpp"
+
+#include <sstream>
 #include "Time.hpp"
 #include "PlaceholderParser.hpp"
 #include "libslic3r/GCode/Thumbnails.hpp"
@@ -104,6 +107,31 @@ std::string get_preset_canonical_name(const std::string &preset_bare_name, const
     }
 }
 
+std::string user_presets_lock_path(bool read_only)
+{
+    return read_only || data_dir().empty() ? std::string() : (fs::path(data_dir()) / (PRESET_USER_DIR ".lock")).string();
+}
+
+// Removes a preset file the scan could not load, and its .info, under the lock.
+// Without the lock, in a cool-down, the file may be another instance's fresh
+// write that this scan merely raced, so it stays for the next scan to judge.
+static void remove_preset_files(const std::string &preset_file, bool read_only)
+{
+    if (read_only)
+        return;
+    const std::string lock_path = user_presets_lock_path();
+    InstanceLock      instance_lock(lock_path);
+    if (! lock_path.empty() && ! instance_lock.locked()) {
+        BOOST_LOG_TRIVIAL(warning) << "Leaving unreadable preset " << preset_file << " in place: the instance lock is not held";
+        return;
+    }
+    boost::system::error_code ec;
+    fs::path file_path(preset_file);
+    fs::remove(file_path, ec);
+    file_path.replace_extension(".info");
+    fs::remove(file_path, ec);
+}
+
 std::string get_preset_bare_name(const std::string &canonical_name)
 {
     const auto pos = canonical_name.find_last_of('/');
@@ -646,18 +674,20 @@ void Preset::save_info(std::string file)
         file = idx_file.string();
     }
 
-    boost::nowide::ofstream c;
-    c.open(file, std::ios::out | std::ios::trunc);
     std::string sync_info_to_save;
     //BBS: hold is used for stop requesting to server this time
     if (this->sync_info.compare("hold") != 0)
         sync_info_to_save = this->sync_info;
+    std::ostringstream c;
     c << "sync_info" << " = " << sync_info_to_save << std::endl;
     c << "user_id" << " = " << this->user_id << std::endl;
     c << "setting_id" << " = " << this->setting_id << std::endl;
     c << "base_id" << " = " << this->base_id << std::endl;
     c << "updated_time" << " = " << std::to_string(this->updated_time) << std::endl;
-    c.close();
+
+    InstanceLock instance_lock(user_presets_lock_path());
+    if (const std::error_code ec = write_file_atomically(file, c.str()))
+        BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << ": failed to save " << file << ": " << ec.message();
 }
 
 void Preset::remove_files(bool cloud_already_deleted)
@@ -666,6 +696,7 @@ void Preset::remove_files(bool cloud_already_deleted)
     if (this->is_project_embedded) {
         return;
     }
+    InstanceLock instance_lock(user_presets_lock_path());
     // Erase the preset file.
     boost::nowide::remove(this->file.c_str());
     fs::path idx_path(this->file);
@@ -702,12 +733,16 @@ void Preset::save(DynamicPrintConfig* parent_config)
     else
         from_str = std::string("Default");
 
-    boost::filesystem::create_directories(fs::path(this->file).parent_path());
     const std::string bare_name = get_preset_bare_name(this->name);
 
+    // What gets written: the diff against the parent, the config plus its
+    // filament id, or the config as is. Built before the lock is taken so the
+    // exclusive window covers only the file writes.
+    DynamicPrintConfig        temp_config;
+    const DynamicPrintConfig *to_save = &this->config;
+
     //BBS: only save difference if it has parent
     if (parent_config) {
-        DynamicPrintConfig temp_config;
         std::vector<std::string> dirty_options = config.diff(*parent_config);
 
         std::string extruder_id_name, extruder_variant_name;
@@ -743,13 +778,22 @@ void Preset::save(DynamicPrintConfig* parent_config)
                     opt_dst->set(opt_src);
             }
         }
-        temp_config.save_to_json(this->file, bare_name, from_str, this->version.to_string());
+        to_save = &temp_config;
     } else if (!filament_id.empty() && inherits().empty()) {
-        DynamicPrintConfig temp_config = config;
+        temp_config = config;
         temp_config.set_key_value(BBL_JSON_KEY_FILAMENT_ID, new ConfigOptionString(filament_id));
-        temp_config.save_to_json(this->file, bare_name, from_str, this->version.to_string());
+        to_save = &temp_config;
-    } else {
+    }
-        this->config.save_to_json(this->file, bare_name, from_str, this->version.to_string());
+
+    std::ostringstream json;
+    to_save->save_to_json(json, bare_name, from_str, this->version.to_string());
+
+    InstanceLock instance_lock(user_presets_lock_path());
+    boost::filesystem::create_directories(fs::path(this->file).parent_path());
+    if (const std::error_code ec = write_file_atomically(this->file, json.str())) {
+        // No .info either: one without its preset reads as a cloud deletion request.
+        BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << ": failed to save " << this->file << ": " << ec.message();
+        return;
     }
     BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " save config for: " << this->name << " and filament_id: " << filament_id << " and base_id: " << this->base_id;
 
@@ -770,6 +814,7 @@ void Preset::reload(Preset const &parent)
     std::string                        reason;
     ForwardCompatibilitySubstitutionRule substitution_rule    = ForwardCompatibilitySubstitutionRule::Disable;
     try {
+        InstanceLock instance_lock(user_presets_lock_path());
         ConfigSubstitutions                config_substitutions = config.load_from_json(file, substitution_rule, key_values, reason);
         this->config = parent.config;
         this->config.apply(std::move(config));
@@ -1707,6 +1752,9 @@ void PresetCollection::load_presets(
     //BBS: change to json format
     for (auto &dir_entry : boost::filesystem::directory_iterator(dir))
     {
+        // Per file, so a save on another thread or in another instance never
+        // waits for the whole scan.
+        InstanceLock instance_lock(user_presets_lock_path(read_only));
         std::string file_name = dir_entry.path().filename().string();
         //if (Slic3r::is_ini_file(dir_entry)) {
         if (Slic3r::is_json_file(file_name)) {
@@ -1725,30 +1773,26 @@ void PresetCollection::load_presets(
                 preset.file = dir_entry.path().string();
                 // Load the preset file, apply preset values on top of defaults.
                 try {
+                    DynamicPrintConfig config;
+                    std::map<std::string, std::string> key_values;
+                    std::string reason;
+                    ConfigSubstitutions config_substitutions;
                     fs::path idx_path(preset.file);
                     idx_path.replace_extension(".info");
                     if (fs::exists(idx_path)) {
                         preset.load_info(idx_path.string());
                     }
-                    DynamicPrintConfig config;
                     //BBS: change to json format
                     //ConfigSubstitutions config_substitutions = config.load_from_ini(preset.file, substitution_rule);
-                    std::map<std::string, std::string> key_values;
+                    config_substitutions = config.load_from_json(preset.file, substitution_rule, key_values, reason);
-                    std::string reason;
-                    ConfigSubstitutions config_substitutions = config.load_from_json(preset.file, substitution_rule, key_values, reason);
-                    if (! config_substitutions.empty())
-                        substitutions.push_back({ preset.name, m_type, PresetConfigSubstitutions::Source::UserFile, preset.file, std::move(config_substitutions) });
                     if (!reason.empty()) {
-                        fs::path file_path(preset.file);
+                        remove_preset_files(preset.file, read_only);
-                        if (!read_only && fs::exists(file_path))
-                            fs::remove(file_path);
-                        file_path.replace_extension(".info");
-                        if (!read_only && fs::exists(file_path))
-                            fs::remove(file_path);
                         BOOST_LOG_TRIVIAL(error) << boost::format("parse config %1% failed")%preset.file;
                         ++m_errors;
                         continue;
                     }
+                    if (! config_substitutions.empty())
+                        substitutions.push_back({ preset.name, m_type, PresetConfigSubstitutions::Source::UserFile, preset.file, std::move(config_substitutions) });
 
                     std::string version_str = key_values[BBL_JSON_KEY_VERSION];
                     boost::optional<Semver> version = Semver::parse(version_str);
@@ -1832,23 +1876,13 @@ void PresetCollection::load_presets(
                 } catch (const std::ifstream::failure &err) {
                     ++m_errors;
                     BOOST_LOG_TRIVIAL(error) << boost::format("The user-config cannot be loaded: %1%. Reason: %2%")%preset.file %err.what();
-                    fs::path file_path(preset.file);
+                    remove_preset_files(preset.file, read_only);
-                    if (!read_only && fs::exists(file_path))
-                        fs::remove(file_path);
-                    file_path.replace_extension(".info");
-                    if (!read_only && fs::exists(file_path))
-                        fs::remove(file_path);
                     //throw Slic3r::RuntimeError(std::string("The selected preset cannot be loaded: ") + preset.file + "\n\tReason: " + err.what());
                 } catch (const std::runtime_error &err) {
                     ++m_errors;
                     BOOST_LOG_TRIVIAL(error) << boost::format("Failed loading the user-config file: %1%. Reason: %2%")%preset.file %err.what();
                     //throw Slic3r::RuntimeError(std::string("Failed loading the preset file: ") + preset.file + "\n\tReason: " + err.what());
-                    fs::path file_path(preset.file);
+                    remove_preset_files(preset.file, read_only);
-                    if (!read_only && fs::exists(file_path))
-                        fs::remove(file_path);
-                    file_path.replace_extension(".info");
-                    if (!read_only && fs::exists(file_path))
-                        fs::remove(file_path);
                 }
 
                 if (preset_loaded_fn != nullptr)
@@ -4201,8 +4235,15 @@ void PhysicalPrinter::update_preset_names_in_config()
     }
 }
 
+void PhysicalPrinter::save(DynamicPrintConfig* /* parent_config */)
+{
+    InstanceLock instance_lock(user_presets_lock_path());
+    this->config.save_to_json(this->file, std::string("Physical_Printer"), std::string("User"), std::string(SLIC3R_VERSION));
+}
+
 void PhysicalPrinter::save(const std::string& file_name_from, const std::string& file_name_to)
 {
+    InstanceLock instance_lock(user_presets_lock_path());
     // rename the file
     boost::nowide::rename(file_name_from.data(), file_name_to.data());
     this->file = file_name_to;
@@ -4334,6 +4375,7 @@ void PhysicalPrinterCollection::load_printers(
                 continue;
             }
             try {
+                InstanceLock instance_lock(user_presets_lock_path());
                 PhysicalPrinter printer(name, this->default_config());
                 printer.file = dir_entry.path().string();
                 // Load the preset file, apply preset values on top of defaults.
@@ -4526,7 +4568,10 @@ bool PhysicalPrinterCollection::delete_printer(const std::string& name)
 
     const PhysicalPrinter& printer = *it;
     // Erase the preset file.
-    boost::nowide::remove(printer.file.c_str());
+    {
+        InstanceLock instance_lock(user_presets_lock_path());
+        boost::nowide::remove(printer.file.c_str());
+    }
     m_printers.erase(it);
     return true;
 }
@@ -4538,7 +4583,10 @@ bool PhysicalPrinterCollection::delete_selected_printer()
     const PhysicalPrinter& printer = this->get_selected_printer();
 
     // Erase the preset file.
-    boost::nowide::remove(printer.file.c_str());
+    {
+        InstanceLock instance_lock(user_presets_lock_path());
+        boost::nowide::remove(printer.file.c_str());
+    }
     // Remove the preset from the list.
     m_printers.erase(m_printers.begin() + m_idx_selected);
     // unselect all printers

src/libslic3r/Preset.hpp

@@ -484,6 +484,12 @@ std::string get_preset_canonical_name(const std::string &preset_bare_name, const
 // Tail segment of a canonical name — what's written to the bundle's .json filename and JSON "name" field.
 std::string get_preset_bare_name(const std::string &canonical_name);
 
+// Lock file guarding every user preset file under data_dir() against other
+// running instances and the preset sync thread. Empty without a data dir, and
+// for a read-only load (the CLI), which never rewrites or deletes and may run
+// many jobs on one data dir.
+std::string user_presets_lock_path(bool read_only = false);
+
 // Resolve an origin from a directory path when the caller passes Kind::Auto.
 PresetOrigin detect_origin_from_path(const boost::filesystem::path &path, const PresetOrigin &explicit_origin = PresetOrigin());
 
@@ -1053,7 +1059,7 @@ public:
 
     //BBS: change to json format
     //void                save() { this->config.save(this->file); }
-    void                save(DynamicPrintConfig* parent_config) { this->config.save_to_json(this->file, std::string("Physical_Printer"), std::string("User"), std::string(SLIC3R_VERSION)); }
+    void                save(DynamicPrintConfig* parent_config);
     void                save(const std::string& file_name_from, const std::string& file_name_to);
 
     void                update_from_preset(const Preset& preset);

src/libslic3r/PresetBundle.cpp

@@ -1,3 +1,4 @@
+#include <atomic>
 #include <cassert>
 #include <chrono>
 #include <ctime>
@@ -12,6 +13,7 @@
 #include "libslic3r.h"
 #include "I18N.hpp"
 #include "Utils.hpp"
+#include "InstanceLock.hpp"
 #include "LocalesUtils.hpp"
 #include "Model.hpp"
 #include "TriangleSelector.hpp"
@@ -1227,6 +1229,13 @@ PresetsConfigSubstitutions PresetBundle::load_user_presets(std::string user, For
 
     const auto user_load_t0 = std::chrono::steady_clock::now();
 
+    // Reads one bundle's metadata under the lock, per file, so the lock is never
+    // held when bundles.WriteLock() is taken afterwards.
+    auto load_bundle_metadata = [read_only](const fs::path &metadata_file, BundleMetadata &metadata) {
+        InstanceLock instance_lock(user_presets_lock_path(read_only));
+        return metadata.load_from_json(metadata_file.string());
+    };
+
     // Load bundle metadata from _local directory first
     fs::path local_dir(folder / PRESET_LOCAL_DIR);
     if (fs::exists(local_dir)) {
@@ -1240,7 +1249,7 @@ PresetsConfigSubstitutions PresetBundle::load_user_presets(std::string user, For
             if (!fs::exists(metadata_file)) continue;
 
             BundleMetadata metadata;
-            if (!metadata.load_from_json(metadata_file.string())) continue;
+            if (!load_bundle_metadata(metadata_file, metadata)) continue;
             metadata.print_presets.clear();
             metadata.filament_presets.clear();
             metadata.printer_presets.clear();
@@ -1275,7 +1284,7 @@ PresetsConfigSubstitutions PresetBundle::load_user_presets(std::string user, For
             if (!fs::exists(metadata_file)) continue;
 
             BundleMetadata metadata;
-            if (!metadata.load_from_json(metadata_file.string())) continue;
+            if (!load_bundle_metadata(metadata_file, metadata)) continue;
             metadata.print_presets.clear();
             metadata.filament_presets.clear();
             metadata.printer_presets.clear();
@@ -1609,10 +1618,12 @@ PresetsConfigSubstitutions PresetBundle::import_presets(std::vector<std::string>
             if (ec) BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << " create directory failed: " << ec.message();
             //create temp folder
             //std::string user_default_temp_dir = data_dir() + "/" + PRESET_USER_DIR + "/" + DEFAULT_USER_FOLDER_NAME + "/" + "temp";
-            fs::path temp_folder(configs_folder / "temp");
+            // Under cache/, per process and per import, so two instances importing
+            // at once do not clear each other's extraction and no preset scan reads it.
+            static std::atomic<unsigned> import_counter{0};
+            fs::path temp_folder(fs::path(data_dir()) / "cache" / ("import." + std::to_string(get_current_pid()) + "." + std::to_string(import_counter++)));
             std::string user_default_temp_dir = temp_folder.make_preferred().string();
-            if (fs::exists(temp_folder)) fs::remove_all(temp_folder);
+            fs::create_directories(temp_folder, ec);
-            fs::create_directory(temp_folder, ec);
             if (ec) BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << " create directory failed: " << ec.message();
 
             file = boost::filesystem::path(file).make_preferred().string();
@@ -1624,6 +1635,9 @@ PresetsConfigSubstitutions PresetBundle::import_presets(std::vector<std::string>
             status        = mz_zip_reader_init_cfile(&zip_archive, zipFile, 0, MZ_ZIP_FLAG_CASE_SENSITIVE | MZ_ZIP_FLAG_IGNORE_PATH);
             if (MZ_FALSE == status) {
                 BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " Failed to initialize reader ZIP archive";
+                if (zipFile != nullptr)
+                    std::fclose(zipFile);
+                fs::remove_all(temp_folder, ec);
                 return substitutions;
             } else {
                 BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " Success to initialize reader ZIP archive";
@@ -2231,10 +2245,9 @@ void PresetBundle::remove_user_presets_directory(const std::string preset_folder
         return;
     }
     BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(" enter, delete directory : %1%") % dir_user_presets;
-    fs::path folder(dir_user_presets);
+    boost::system::error_code ec;
-    if (fs::exists(folder)) {
+    InstanceLock instance_lock(user_presets_lock_path());
-        fs::remove_all(folder);
+    fs::remove_all(fs::path(dir_user_presets), ec);
-    }
 }
 
 void PresetBundle::update_system_preset_setting_ids(std::map<std::string, std::map<std::string, std::string>>& system_presets)
@@ -7932,9 +7945,13 @@ bool BundleMetadata::save_to_json(const std::string& path) const
         j["filament_presets"] = strip_prefix(this->filament_presets);                                                                                                                                                                                                                       
         j["printer_presets"] = strip_prefix(this->printer_presets);
 
-        boost::nowide::ofstream ofs(path);
+        const std::string content = j.dump(4);
-        ofs << j.dump(4);
+        InstanceLock instance_lock(user_presets_lock_path());
-        return ofs.good();
+        if (const std::error_code ec = write_file_atomically(path, content)) {
+            BOOST_LOG_TRIVIAL(error) << "Failed to save bundle metadata to " << path << ": " << ec.message();
+            return false;
+        }
+        return true;
     } catch (const std::exception& e) {
         BOOST_LOG_TRIVIAL(error) << "Failed to save bundle metadata to " << path << ": " << e.what();
         return false;

src/libslic3r/PresetCacheFormat.cpp

@@ -400,46 +400,24 @@ bool write_cache_blob(const std::string& path, const std::string& blob)
 {
     boost::crc_32_type crc;
     crc.process_bytes(blob.data(), blob.size());
-    // Written beside the target and moved into place, as AppConfig::save does:
+    // Written beside the target and moved into place: a cache is truncated and
-    // a cache is truncated and rewritten in full, so a write that dies partway
+    // rewritten in full, so a write that dies partway would otherwise leave a
-    // would otherwise leave a header claiming more body than the file holds.
+    // header claiming more body than the file holds.
-    // The PID suffix also keeps two instances writing the same vendor from
-    // interleaving.
-    const std::string tmp_path = path + "." + std::to_string(get_current_pid()) + ".tmp";
     try {
         boost::filesystem::create_directories(boost::filesystem::path(path).parent_path());
-        {
+        CacheFileHeader fhdr;
-            boost::nowide::ofstream ofs(tmp_path, std::ios::binary | std::ios::trunc);
+        fhdr.magic     = CACHE_MAGIC;
-            if (!ofs.is_open()) {
+        fhdr.version   = CACHE_VERSION;
-                BOOST_LOG_TRIVIAL(warning) << "VendorCacheFile: cannot open for writing: " << tmp_path;
+        fhdr.data_size = static_cast<uint64_t>(blob.size());
-                return false;
+        fhdr.crc32     = crc.checksum();
-            }
+        const std::string_view header(reinterpret_cast<const char*>(&fhdr), sizeof(fhdr));
-            CacheFileHeader fhdr;
+        if (const std::error_code ec = write_file_atomically(path, { header, std::string_view(blob) }, /*binary=*/true)) {
-            fhdr.magic     = CACHE_MAGIC;
+            BOOST_LOG_TRIVIAL(warning) << "VendorCacheFile: write failed (" << path << "): " << ec.message();
-            fhdr.version   = CACHE_VERSION;
-            fhdr.data_size = static_cast<uint64_t>(blob.size());
-            fhdr.crc32     = crc.checksum();
-            ofs.write(reinterpret_cast<const char*>(&fhdr), sizeof(fhdr));
-            ofs.write(blob.data(), static_cast<std::streamsize>(blob.size()));
-            ofs.close();   // flush; close() raises failbit on error
-            if (! ofs.good()) {
-                BOOST_LOG_TRIVIAL(warning) << "VendorCacheFile: write failed (" << tmp_path << ")";
-                boost::system::error_code ec;
-                boost::filesystem::remove(tmp_path, ec);
-                return false;
-            }
-        }
-        if (const std::error_code ec = rename_file(tmp_path, path)) {
-            BOOST_LOG_TRIVIAL(warning) << "VendorCacheFile: could not move " << tmp_path << " into place: " << ec.message();
-            boost::system::error_code rm;
-            boost::filesystem::remove(tmp_path, rm);
             return false;
         }
         return true;
     } catch (const std::exception& e) {
         BOOST_LOG_TRIVIAL(warning) << "VendorCacheFile: write failed (" << path << "): " << e.what();
-        boost::system::error_code ec;
-        boost::filesystem::remove(tmp_path, ec);
         return false;
     }
 }

src/libslic3r/Utils.hpp

@@ -8,6 +8,8 @@
 #include <functional>
 #include <type_traits>
 #include <system_error>
+#include <initializer_list>
+#include <string_view>
 #include <regex>
 
 #include <boost/system/error_code.hpp>
@@ -224,6 +226,21 @@ extern std::vector<std::string> split_string(const std::string &str, char delimi
 // On Windows, the file explorer (or anti-virus or whatever else) often locks the file
 // for a short while, so the file may not be movable. Retry while we see recoverable errors.
 extern std::error_code rename_file(const std::string &from, const std::string &to);
+// Write `chunks`, in order, to `path` through a temporary file beside it that is
+// then renamed over the target, so a concurrent reader sees the old or the new
+// file, never a partial one. The temporary is removed on failure and an existing
+// target keeps its permissions. Text mode unless `binary`, so Windows writes CRLF
+// as the streams this replaces did. A target that is not a regular file (a
+// device or pipe) is written in place, since replacing it would change what it
+// is, and so is an existing target beside which no temporary can be created or
+// whose replace the filesystem refuses; a symlink is followed and the file it
+// names is replaced. On Windows a reader holding the
+// target open without sharing its deletion, which the C runtime does not, makes
+// the replace fall back to the in-place write too, so an unlocked reader there
+// can still see a partial file.
+extern std::error_code write_file_atomically(const std::string &path, std::initializer_list<std::string_view> chunks, bool binary = false);
+inline std::error_code write_file_atomically(const std::string &path, const std::string &content, bool binary = false)
+	{ return write_file_atomically(path, { std::string_view(content) }, binary); }
 
 enum CopyFileResult {
 	SUCCESS = 0,

src/libslic3r/utils.cpp

@@ -9,6 +9,8 @@
 #include <stdio.h>
 #include <filesystem>
 #include <sstream>
+#include <cerrno>
+#include <mutex>
 #include <iomanip>
 #include <algorithm>
 #include <cmath>
@@ -702,13 +704,99 @@ namespace WindowsSupport
 std::error_code rename_file(const std::string &from, const std::string &to)
 {
 #ifdef _WIN32
+	// Retries and moves an open destination aside itself.
 	return WindowsSupport::rename(from, to);
 #else
-	boost::nowide::remove(to.c_str());
+	// rename(2) replaces an existing target atomically; removing it first would
-	return std::make_error_code(static_cast<std::errc>(boost::nowide::rename(from.c_str(), to.c_str())));
+	// leave a window in which the file does not exist at all.
+	if (boost::nowide::rename(from.c_str(), to.c_str()) == 0)
+		return {};
+	const int err = errno;
+	// Some mounts (sshfs, gvfs, MTP and a few SMB setups) refuse to replace an
+	// existing target in one step, each with the error it sees fit; every error
+	// is worth the remove-then-rename this always did, except the ones no retry
+	// can help: nothing at the source, a different device, or a directory where
+	// a file was expected and the reverse.
+	const bool worth_retrying = err != ENOENT && err != EXDEV && err != ENOTDIR && err != EISDIR;
+	if (worth_retrying && boost::nowide::remove(to.c_str()) == 0 && boost::nowide::rename(from.c_str(), to.c_str()) == 0)
+		return {};
+	return std::make_error_code(static_cast<std::errc>(err));
 #endif
 }
 
+static std::error_code write_whole_file(const std::string &path, std::initializer_list<std::string_view> chunks, bool binary)
+{
+	errno = 0;
+	FILE *file = boost::nowide::fopen(path.c_str(), binary ? "wb" : "w");
+	if (file == nullptr)
+		return std::make_error_code(errno != 0 ? static_cast<std::errc>(errno) : std::errc::io_error);
+	bool ok = true;
+	for (const std::string_view chunk : chunks)
+		ok = ok && std::fwrite(chunk.data(), 1, chunk.size(), file) == chunk.size();
+	ok = ok && std::fflush(file) == 0;
+	const int err = ok ? 0 : errno;
+	ok = std::fclose(file) == 0 && ok;
+	if (ok)
+		return {};
+	return std::make_error_code(err != 0 ? static_cast<std::errc>(err) : std::errc::io_error);
+}
+
+// The in-place fallback truncates the target, so two threads of this process
+// on the same file must not both be in it. One mutex for all such writes: they
+// are the rare case. Never freed, like the InstanceLock registry, so a save
+// during static destruction still finds it.
+static std::error_code write_in_place(const std::string &path, std::initializer_list<std::string_view> chunks, bool binary)
+{
+	static auto *mutex = new std::mutex();
+	std::lock_guard<std::mutex> guard(*mutex);
+	return write_whole_file(path, chunks, binary);
+}
+
+std::error_code write_file_atomically(const std::string &path, std::initializer_list<std::string_view> chunks, bool binary)
+{
+	boost::system::error_code bec;
+	const boost::filesystem::file_status target = boost::filesystem::symlink_status(path, bec);
+	const bool target_exists = ! bec && boost::filesystem::exists(target);
+	if (target_exists && boost::filesystem::is_symlink(target)) {
+		// A config or preset kept in a dotfiles repository: the link stays,
+		// the file it points to is replaced like any other.
+		const boost::filesystem::path resolved = boost::filesystem::canonical(path, bec);
+		if (! bec && boost::filesystem::is_regular_file(resolved, bec))
+			return write_file_atomically(resolved.string(), chunks, binary);
+	}
+	if (target_exists && ! boost::filesystem::is_regular_file(target))
+		return write_in_place(path, chunks, binary);
+
+	// Unique per process and per call, so two threads writing one target
+	// without a lock never share a temporary.
+	static std::atomic<unsigned> counter{0};
+	const std::string tmp_path = path + "." + std::to_string(get_current_pid()) + "." + std::to_string(counter++) + ".tmp";
+	if (const std::error_code ec = write_whole_file(tmp_path, chunks, binary)) {
+		boost::nowide::remove(tmp_path.c_str());
+		if (! target_exists)
+			return ec;
+		// A directory that lets this process write its files but not create
+		// one: losing the save is worse than a reader seeing a partial file.
+		BOOST_LOG_TRIVIAL(warning) << "Cannot create a temporary beside " << path << " (" << ec.message() << "); writing in place";
+		return write_in_place(path, chunks, binary);
+	}
+#ifndef _WIN32
+	// Not on Windows, where a read-only bit on the temporary would stop the rename itself.
+	if (target_exists)
+		boost::filesystem::permissions(tmp_path, target.permissions(), bec);
+#endif
+	if (const std::error_code ec = rename_file(tmp_path, path)) {
+		boost::nowide::remove(tmp_path.c_str());
+		// A reader on Windows holding the target open without FILE_SHARE_DELETE,
+		// or a mount that cannot replace a file at all. Losing the save is worse
+		// than a reader seeing a partial file, so write in place the way this
+		// used to work before the atomic path existed.
+		BOOST_LOG_TRIVIAL(warning) << "Cannot replace " << path << " (" << ec.message() << "); writing in place";
+		return write_in_place(path, chunks, binary);
+	}
+	return {};
+}
+
 #ifdef __linux__
 // Copied from boost::filesystem.
 // Called by copy_file_linux() in case linux sendfile() API is not supported.

src/slic3r/GUI/GUI_App.cpp

@@ -85,6 +85,7 @@
 #include "libslic3r/Model.hpp"
 #include "libslic3r/I18N.hpp"
 #include "libslic3r/PresetBundle.hpp"
+#include "libslic3r/InstanceLock.hpp"
 #include "libslic3r/Thread.hpp"
 #include "libslic3r/miniz_extension.hpp"
 #include "libslic3r/Utils.hpp"
@@ -3531,7 +3532,7 @@ bool GUI_App::on_init_inner()
             update_publish_status();
         }
 
-        if (m_post_initialized && app_config->dirty())
+        if (m_post_initialized && app_config->dirty() && app_config->save_due())
             app_config->save();
 
     });
@@ -7623,8 +7624,11 @@ void GUI_App::start_sync_user_preset(bool with_progress_dlg)
 
                             // Delete the bundle folder and bundle
                             fs::path bundle_folder = fs::path(bundle.path.c_str()).parent_path();
-                            boost::system::error_code ec;
+                            {
-                            boost::filesystem::remove_all(bundle_folder, ec);
+                                boost::system::error_code ec;
+                                InstanceLock instance_lock(user_presets_lock_path());
+                                boost::filesystem::remove_all(bundle_folder, ec);
+                            }
 
                             preset_bundle->bundles.WriteLock();
                             preset_bundle->bundles.m_bundles.erase(bundle.id);
@@ -8889,6 +8893,7 @@ void GUI_App::preset_deleted_from_cloud(std::string setting_id)
 
     // Delete the .info file after cloud deletion is confirmed
     if (!preset_file_path.empty() && fs::exists(fs::path(preset_file_path))) {
+        InstanceLock instance_lock(user_presets_lock_path());
         boost::nowide::remove(preset_file_path.c_str());
         BOOST_LOG_TRIVIAL(info) << "Deleted .info file after cloud confirmation: " << preset_file_path;
     }
@@ -8951,15 +8956,19 @@ void GUI_App::scan_orphaned_info_files()
             fs::path preset_file = info_file;
             preset_file.replace_extension(".json");
 
-            // If .json doesn't exist, .info is orphaned
+            // If .json doesn't exist, .info is orphaned. Read under the lock, so a
-            if (!fs::exists(preset_file)) {
+            // remove_files() in another instance is seen whole or not at all; the
-                // Extract setting_id from .info file
+            // delete queue's own mutex is taken after the lock is released.
-                std::string setting_id = extract_setting_id_from_info(info_file.string());
+            std::string setting_id;
-                if (!setting_id.empty()) {
+            {
-                    // Add to need_delete_presets
+                InstanceLock instance_lock(user_presets_lock_path());
-                    delete_preset_from_cloud(setting_id, info_file.string());
+                if (!fs::exists(preset_file))
-                    BOOST_LOG_TRIVIAL(info) << "Found orphaned .info file on startup: " << info_file.string();
+                    setting_id = extract_setting_id_from_info(info_file.string());
-                }
+            }
+            if (!setting_id.empty()) {
+                // Add to need_delete_presets
+                delete_preset_from_cloud(setting_id, info_file.string());
+                BOOST_LOG_TRIVIAL(info) << "Found orphaned .info file on startup: " << info_file.string();
             }
         }
         if (ec)

src/slic3r/GUI/WebGuideDialog.cpp

@@ -1481,9 +1481,7 @@ bool GuideFrame::BuildProfileDataFromVendors()
             return false;
 
         // Written through a temp file and moved into place, as the preset caches
-        // are: half a cache must never be readable, and the PID suffix keeps two
+        // are: half a cache must never be readable.
-        // instances from interleaving on one temp file.
-        const std::string tmp_path = cache_file.string() + "." + std::to_string(get_current_pid()) + ".tmp";
         try {
             json out;
             out["format"]  = 1;
@@ -1492,18 +1490,9 @@ bool GuideFrame::BuildProfileDataFromVendors()
             for (const char* key : { "model", "machine", "filament", "process" })
                 profile[key] = m_ProfileJson[key];
             boost::filesystem::create_directories(cache_file.parent_path());
-            {
+            if (const std::error_code ec = write_file_atomically(cache_file.string(), out.dump(-1, ' ', false, json::error_handler_t::ignore), /*binary=*/true))
-                boost::nowide::ofstream ofs(tmp_path, std::ios::binary | std::ios::trunc);
-                ofs << out.dump(-1, ' ', false, json::error_handler_t::ignore);
-                ofs.close();
-                if (! ofs.good())
-                    throw std::runtime_error("write failed");
-            }
-            if (const std::error_code ec = rename_file(tmp_path, cache_file.string()))
                 throw std::runtime_error(ec.message());
         } catch (const std::exception& e) {
-            boost::system::error_code rm;
-            boost::filesystem::remove(tmp_path, rm);
             BOOST_LOG_TRIVIAL(warning) << "GuideFrame: could not write the profile data cache: " << e.what();
         }
         return true;

src/slic3r/Utils/3DPrinterOS.cpp

@@ -2,6 +2,7 @@
 
 #include <algorithm>
 #include <sstream>
+#include <system_error>
 #include <exception>
 #include <boost/format.hpp>
 #include <boost/log/trivial.hpp>
@@ -580,9 +581,10 @@ bool C3DPrinterOS::save_api_session(const std::string &session, const std::strin
     j.put("session", session);
     j.put("email", email);
     try {
-        auto temp_path = m_api_session_file_path + ".tmp";
+        std::ostringstream json;
-        pt::write_json(temp_path, j);
+        pt::write_json(json, j);
-        boost::filesystem::rename(temp_path, m_api_session_file_path);
+        if (const std::error_code ec = write_file_atomically(m_api_session_file_path, json.str()))
+            throw std::system_error(ec);
     } catch (const std::exception &err) {
         BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << ": failed to write json to file. Path = "
                                  << m_api_session_file_path

src/slic3r/Utils/OrcaCloudServiceAgent.cpp

@@ -1475,15 +1475,8 @@ void OrcaCloudServiceAgent::save_sync_state()
     if (sync_state_path.empty())
         return;
 
-    try {
+    if (const std::error_code ec = write_file_atomically(sync_state_path, std::to_string(sync_state.last_sync_timestamp)))
-        std::string tmp_path = sync_state_path + ".tmp";
+        BOOST_LOG_TRIVIAL(warning) << "OrcaCloudServiceAgent: failed to save the sync state: " << ec.message();
-        std::ofstream ofs(tmp_path, std::ios::out | std::ios::trunc);
-        if (ofs.good()) {
-            ofs << std::to_string(sync_state.last_sync_timestamp);
-            ofs.close();
-            boost::filesystem::rename(tmp_path, sync_state_path);
-        }
-    } catch (...) {}
 }
 
 void OrcaCloudServiceAgent::clear_sync_state()
@@ -1572,22 +1565,10 @@ void OrcaCloudServiceAgent::persist_user_secret(const std::string& secret)
             wxFileName::Mkdir(path.GetPath(), wxS_DIR_DEFAULT, wxPATH_MKDIR_FULL);
         }
 
-        const std::string tmp_path = secret_fallback_path + ".tmp";
+        if (const std::error_code ec = write_file_atomically(secret_fallback_path, signed_payload, /*binary=*/true))
-        std::ofstream ofs(tmp_path, std::ios::out | std::ios::trunc | std::ios::binary);
+            BOOST_LOG_TRIVIAL(warning) << "OrcaCloudServiceAgent: cannot write user secret file " << secret_fallback_path << ": " << ec.message();
-        if (ofs.good()) {
+        else
-            ofs << signed_payload;
+            stored = true;
-            ofs.flush();
-            ofs.close();
-
-            if (wxRenameFile(wxString::FromUTF8(tmp_path.c_str()), wxString::FromUTF8(secret_fallback_path.c_str()), true)) {
-                stored = true;
-            } else {
-                wxRemoveFile(wxString::FromUTF8(tmp_path.c_str()));
-                BOOST_LOG_TRIVIAL(warning) << "OrcaCloudServiceAgent: failed to atomically replace user secret file";
-            }
-        } else {
-            BOOST_LOG_TRIVIAL(warning) << "OrcaCloudServiceAgent: cannot open user secret file for write - " << secret_fallback_path;
-        }
     } else {
         // Use wxSecretStore only
         wxSecretStore store = wxSecretStore::GetDefault();

src/slic3r/plugin/PluginConfig.cpp

@@ -249,21 +249,10 @@ bool PluginConfig::save()
         return false;
     }
 
-    // Write to a PID-suffixed file and rename it into place, so a crash mid-write cannot truncate an
+    // Written beside the target and moved into place, so a crash mid-write cannot truncate an
-    // existing config. Same approach as AppConfig::save().
+    // existing config.
-    const std::string path_pid = (boost::format("%1%.%2%") % path % get_current_pid()).str();
+    if (const std::error_code ec = write_file_atomically(path, root.dump(1, '\t') + "\n")) {
-
+        BOOST_LOG_TRIVIAL(error) << "PluginConfig: failed to write " << path << ": " << ec.message() << "; keeping the existing config";
-    boost::nowide::ofstream file;
-    file.open(path_pid, std::ios::out | std::ios::trunc);
-    file << root.dump(1, '\t') << std::endl;
-    file.close();
-    if (file.fail()) {
-        BOOST_LOG_TRIVIAL(error) << "PluginConfig: failed to write " << path_pid << "; keeping the existing config";
-        return false;
-    }
-
-    if (const std::error_code rename_ec = rename_file(path_pid, path)) {
-        BOOST_LOG_TRIVIAL(error) << "PluginConfig: failed to move " << path_pid << " onto " << path << ": " << rename_ec.message();
         return false;
     }
 

tests/libslic3r/CMakeLists.txt

@@ -49,6 +49,7 @@ add_executable(${_TEST_NAME}_tests
     test_ordering_strategies.cpp
     # test_png_io.cpp
     test_indexed_triangle_set.cpp
+    test_instance_lock.cpp
     ../libnest2d/printer_parts.cpp
     )
 

tests/libslic3r/test_instance_lock.cpp

@@ -0,0 +1,204 @@
+#include <catch2/catch_all.hpp>
+
+#include <atomic>
+#include <chrono>
+#include <thread>
+
+#include <boost/filesystem.hpp>
+
+#include "libslic3r/InstanceLock.hpp"
+#include "test_utils.hpp"
+
+#ifndef _WIN32
+#include <fcntl.h>
+#include <sys/file.h>
+#include <sys/wait.h>
+#include <unistd.h>
+#endif
+
+using namespace Slic3r;
+using namespace std::chrono_literals;
+
+// Sets a process-wide knob for one test and restores it however the test ends.
+template<typename T> struct ScopedStaticValue
+{
+    T &ref;
+    T  saved;
+    ScopedStaticValue(T &ref, T value) : ref(ref), saved(ref) { ref = value; }
+    ~ScopedStaticValue() { ref = saved; }
+};
+
+TEST_CASE("InstanceLock creates its lock file and holds it for the guard's scope", "[InstanceLock]")
+{
+    ScopedTemporaryFile lock_file(".lock");
+    const std::string   path = lock_file.string();
+
+    {
+        InstanceLock lock(path);
+        REQUIRE(lock.locked());
+        REQUIRE(boost::filesystem::exists(path));
+    }
+    // Released: a fresh guard gets the lock at once instead of waiting out a timeout.
+    const auto   started = std::chrono::steady_clock::now();
+    InstanceLock again(path, 5000ms);
+    REQUIRE(again.locked());
+    // Well inside the timeout it would otherwise have waited out; loose enough for a loaded runner.
+    REQUIRE(std::chrono::steady_clock::now() - started < 4000ms);
+}
+
+TEST_CASE("InstanceLock nests within one thread", "[InstanceLock]")
+{
+    ScopedTemporaryFile lock_file(".lock");
+    const std::string   path = lock_file.string();
+
+    InstanceLock outer(path);
+    {
+        InstanceLock inner(path, 100ms);
+        REQUIRE(inner.locked());
+    }
+    // The inner guard leaving does not release the outer one.
+    REQUIRE(outer.locked());
+}
+
+TEST_CASE("InstanceLock is a no-op for an empty path and survives an unwritable one", "[InstanceLock]")
+{
+    ScopedTemporaryDir dir;
+
+    InstanceLock none("");
+    REQUIRE_FALSE(none.locked());
+
+    // The directory does not exist, so the lock file cannot be created; the
+    // guard still constructs and the write it guards can go ahead.
+    InstanceLock unwritable((dir.path() / "missing" / "shared.lock").string(), 100ms);
+    REQUIRE_FALSE(unwritable.locked());
+}
+
+TEST_CASE("InstanceLock retries a lock file it could not open once the cool-down passes", "[InstanceLock]")
+{
+    ScopedTemporaryDir dir;
+    const std::string  path = (dir.path() / "later" / "shared.lock").string();
+    ScopedStaticValue  cooldown(InstanceLock::cooldown, 300ms);
+
+    bool before_dir, during_cooldown, after_cooldown;
+    const auto started = std::chrono::steady_clock::now();
+    {
+        InstanceLock lock(path, 100ms);
+        before_dir = lock.locked();
+    }
+    boost::filesystem::create_directories(dir.path() / "later");
+    {
+        InstanceLock lock(path, 100ms);
+        during_cooldown = lock.locked();
+    }
+    const bool second_guard_inside_cooldown = std::chrono::steady_clock::now() - started < InstanceLock::cooldown;
+    std::this_thread::sleep_for(400ms);
+    {
+        InstanceLock lock(path, 100ms);
+        after_cooldown = lock.locked();
+    }
+
+    REQUIRE_FALSE(before_dir);
+    // A loaded runner may take longer than the cool-down to get here; then the
+    // second guard legitimately retried, so only assert when the timing held.
+    if (second_guard_inside_cooldown)
+        REQUIRE_FALSE(during_cooldown);
+    REQUIRE(after_cooldown);
+}
+
+TEST_CASE("InstanceLock reopens a lock file that was replaced on disk", "[InstanceLock]")
+{
+    ScopedTemporaryFile lock_file(".lock");
+    const std::string   path = lock_file.string();
+    {
+        InstanceLock lock(path);
+        REQUIRE(lock.locked());
+    }
+
+    boost::filesystem::remove(path);
+    InstanceLock lock(path);
+    REQUIRE(lock.locked());
+    // Each outermost guard opens the file afresh, so the deleted path is back.
+    REQUIRE(boost::filesystem::exists(path));
+}
+
+TEST_CASE("InstanceLock serialises the threads of one process", "[InstanceLock]")
+{
+    ScopedTemporaryFile lock_file(".lock");
+    const std::string   path = lock_file.string();
+
+    std::atomic<bool> holder_ready{false};
+    std::atomic<bool> holder_released{false};
+    std::thread holder([&] {
+        InstanceLock lock(path);
+        holder_ready = true;
+        std::this_thread::sleep_for(150ms);
+        holder_released = true;
+    });
+    while (! holder_ready)
+        std::this_thread::yield();
+
+    bool released_before_acquire = false;
+    {
+        InstanceLock lock(path);
+        released_before_acquire = holder_released;
+    }
+    holder.join();
+    REQUIRE(released_before_acquire);
+}
+
+#ifndef _WIN32
+// The cross-process side of the lock is a POSIX flock, which a child process
+// takes here directly; LockFileEx backs the guard on Windows, but spawning a
+// child there is not worth a test.
+TEST_CASE("InstanceLock yields to another process and reports it", "[InstanceLock]")
+{
+    ScopedTemporaryFile lock_file(".lock");
+    const std::string   path = lock_file.string();
+    ScopedStaticValue   cooldown(InstanceLock::cooldown, 300ms);
+
+    int child_holds[2], child_may_exit[2];
+    REQUIRE(::pipe(child_holds) == 0);
+    REQUIRE(::pipe(child_may_exit) == 0);
+
+    const pid_t child = ::fork();
+    REQUIRE(child >= 0);
+    if (child == 0) {
+        int  fd   = ::open(path.c_str(), O_RDWR | O_CREAT, 0644);
+        char byte = ::flock(fd, LOCK_EX | LOCK_NB) == 0 ? '1' : '0';
+        if (::write(child_holds[1], &byte, 1) != 1 || ::read(child_may_exit[0], &byte, 1) != 1)
+            ::_exit(1);
+        ::_exit(0);
+    }
+
+    char byte = '0';
+    REQUIRE(::read(child_holds[0], &byte, 1) == 1);
+    REQUIRE(byte == '1');
+
+    bool locked_while_child_holds;
+    {
+        InstanceLock lock(path, 100ms);
+        locked_while_child_holds = lock.locked();
+    }
+    // The timed-out wait starts a cool-down: the next guard does not touch the file.
+    const auto started = std::chrono::steady_clock::now();
+    bool       locked_during_cooldown;
+    {
+        InstanceLock lock(path, 5000ms);
+        locked_during_cooldown = lock.locked();
+    }
+    const auto cooldown_wait = std::chrono::steady_clock::now() - started;
+    REQUIRE(::write(child_may_exit[1], "x", 1) == 1);
+    int status = 0;
+    REQUIRE(::waitpid(child, &status, 0) == child);
+    for (int fd : {child_holds[0], child_holds[1], child_may_exit[0], child_may_exit[1]})
+        ::close(fd);
+
+    REQUIRE_FALSE(locked_while_child_holds);
+    REQUIRE_FALSE(locked_during_cooldown);
+    REQUIRE(cooldown_wait < 4000ms);
+    // Once the cool-down passes, the lock the child released is taken again.
+    std::this_thread::sleep_for(400ms);
+    InstanceLock lock(path);
+    REQUIRE(lock.locked());
+}
+#endif

tests/libslic3r/test_utils.cpp

@@ -10,6 +10,8 @@
 #include <cctype>
 #include <fstream>
 #include <string>
+#include <thread>
+#include <system_error>
 
 #ifndef _WIN32
 #include <unistd.h>     // getuid
@@ -62,6 +64,113 @@ TEST_CASE("per-user temp root is unchanged on Windows, isolated elsewhere", "[ut
 #endif
 }
 
+TEST_CASE("write_file_atomically replaces the target and leaves no temporary file", "[utils]") {
+    ScopedTemporaryDir dir;
+    const boost::filesystem::path target = dir.path() / "preset.json";
+
+    REQUIRE_FALSE(write_file_atomically(target.string(), "first"));
+    REQUIRE_FALSE(write_file_atomically(target.string(), "second"));
+
+    std::string content;
+    load_string_file(target, content);
+    REQUIRE(content == "second");
+    size_t entries = 0;
+    for (auto &entry : boost::filesystem::directory_iterator(dir.path())) {
+        (void) entry;
+        ++entries;
+    }
+    REQUIRE(entries == 1);
+}
+
+TEST_CASE("write_file_atomically reports a missing directory and writes nothing", "[utils]") {
+    ScopedTemporaryDir dir;
+    const boost::filesystem::path target = dir.path() / "missing" / "preset.json";
+
+    const std::error_code ec = write_file_atomically(target.string(), "x");
+    REQUIRE(ec == std::errc::no_such_file_or_directory);
+    REQUIRE_FALSE(boost::filesystem::exists(target));
+}
+
+#ifndef _WIN32
+// The read-only bit on a directory stops file creation only on POSIX.
+TEST_CASE("write_file_atomically writes in place when no temporary can be created beside an existing target", "[utils]") {
+    if (::geteuid() == 0)
+        SKIP("a read-only directory does not stop root");
+    ScopedTemporaryDir dir;
+    const boost::filesystem::path target = dir.path() / "preset.json";
+    REQUIRE_FALSE(write_file_atomically(target.string(), "first"));
+    boost::filesystem::permissions(dir.path(), boost::filesystem::owner_read | boost::filesystem::owner_exe);
+
+    const std::error_code replaced = write_file_atomically(target.string(), "second");
+    const std::error_code created  = write_file_atomically((dir.path() / "new.json").string(), "x");
+    // Restored before any assertion, so a failure never leaves an unremovable directory behind.
+    boost::filesystem::permissions(dir.path(), boost::filesystem::owner_all);
+
+    REQUIRE_FALSE(replaced);
+    REQUIRE(created == std::errc::permission_denied);
+    std::string content;
+    load_string_file(target, content);
+    REQUIRE(content == "second");
+}
+#endif
+
+TEST_CASE("write_file_atomically keeps bytes intact in binary mode", "[utils]") {
+    ScopedTemporaryDir dir;
+    const boost::filesystem::path target = dir.path() / "blob.bin";
+    const std::string bytes("a\r\nb\0c", 6);
+
+    REQUIRE_FALSE(write_file_atomically(target.string(), bytes, /*binary=*/true));
+    REQUIRE(boost::filesystem::file_size(target) == bytes.size());
+}
+
+#ifndef _WIN32
+TEST_CASE("write_file_atomically writes through a symlink and keeps the target's permissions", "[utils]") {
+    ScopedTemporaryDir dir;
+    const boost::filesystem::path real = dir.path() / "real.json";
+    const boost::filesystem::path link = dir.path() / "link.json";
+    REQUIRE_FALSE(write_file_atomically(real.string(), "first"));
+    boost::filesystem::permissions(real, boost::filesystem::owner_read | boost::filesystem::owner_write);
+    boost::filesystem::create_symlink(real, link);
+
+    REQUIRE_FALSE(write_file_atomically(link.string(), "second"));
+
+    REQUIRE(boost::filesystem::is_symlink(boost::filesystem::symlink_status(link)));
+    std::string content;
+    load_string_file(real, content);
+    REQUIRE(content == "second");
+
+    REQUIRE_FALSE(write_file_atomically(real.string(), "third"));
+    const auto perms = boost::filesystem::status(real).permissions() & boost::filesystem::all_all;
+    REQUIRE(perms == (boost::filesystem::owner_read | boost::filesystem::owner_write));
+}
+#endif
+
+TEST_CASE("write_file_atomically survives two threads writing one target", "[utils]") {
+    ScopedTemporaryDir dir;
+    const boost::filesystem::path target = dir.path() / "shared.json";
+    const std::string a(20000, 'a'), b(20000, 'b');
+
+    std::thread other([&] {
+        for (int i = 0; i < 50; ++i)
+            write_file_atomically(target.string(), a);
+    });
+    for (int i = 0; i < 50; ++i)
+        write_file_atomically(target.string(), b);
+    other.join();
+
+    std::string content;
+    load_string_file(target, content);
+    const bool whole = content == a || content == b;
+    REQUIRE(whole);
+    // No temporary may be left; a scanner on Windows may briefly hold the old
+    // file under another name, so only the temporaries are counted.
+    size_t temporaries = 0;
+    for (auto &entry : boost::filesystem::directory_iterator(dir.path()))
+        if (entry.path().extension() == ".tmp")
+            ++temporaries;
+    REQUIRE(temporaries == 0);
+}
+
 TEST_CASE("copy_file reports the OS error when the destination cannot be written", "[utils]") {
     ScopedTemporaryFile source(".txt");
     {

tests/libslic3r/test_vendor_cache.cpp

@@ -1356,24 +1356,6 @@ TEST_CASE("a header claiming more body than the file holds is rejected", "[Vendo
     REQUIRE_FALSE(bundle.load_vendor_cache(cache, "Bounded", Semver(1, 0, 0)));
 }
 
-TEST_CASE("a failed write leaves the previous cache in place", "[VendorCache]")
-{
-    TempDir tmp;
-    const std::string cache = (tmp.path / "Durable.opc").string();
-    REQUIRE(save_one_vendor(cache, one_vendor("Durable"), "Durable", "1.0.0"));
-    const std::string before = slurp(cache);
-
-    // A directory where the temp file wants to go: the write cannot complete,
-    // and must not have destroyed what was already there to find that out.
-    const fs::path blocker = fs::path(cache + "." + std::to_string(get_current_pid()) + ".tmp");
-    fs::create_directories(blocker);
-
-    REQUIRE_FALSE(save_one_vendor(cache, one_vendor("Durable"), "Durable", "2.0.0"));
-    CHECK(slurp(cache) == before);
-
-    fs::remove_all(blocker);
-}
-
 TEST_CASE("a cache written by another build's option ordering still loads", "[VendorCache]")
 {
     // The regression the fingerprint used to prevent by refusing the file