Remove using namespace std from json_diff.hpp

The directive sat at global scope in a header that DeviceManager.hpp
includes, so most of the GUI compiled with all of std in the global
namespace. 42 files had come to rely on it, mostly for string, vector
and unordered_map, four of them for the ""sv and ""ms literals.

Those sites are qualified. GCodeViewer.cpp spelled the type as
std::vector<::string>, which only resolved through the directive.

src/OrcaSlicer.cpp

@@ -3524,7 +3524,7 @@ int CLI::run(int argc, char **argv)
             ConfigOptionStrings *curr_variant_opt = m_print_config.option<ConfigOptionStrings>("filament_extruder_variant");
             if (!curr_variant_opt) {
                 curr_variant_opt = m_print_config.option<ConfigOptionStrings>("filament_extruder_variant", true);
-                std::vector<string>& filament_variants = curr_variant_opt->values;
+                std::vector<std::string>& filament_variants = curr_variant_opt->values;
                 filament_variants.resize(filament_count, get_extruder_variant_string(etDirectDrive, nvtStandard));
             }
             const ConfigOptionStrings *new_variant_opt = dynamic_cast<const ConfigOptionStrings*>(config.option("filament_extruder_variant", true));
@@ -6554,7 +6554,7 @@ int CLI::run(int argc, char **argv)
                                                 std::vector<int> result_filaments;
                                                 //result_filaments.reserve(conflict_filaments.size());
                                                 std::set_intersection(conflict_filament_vector.begin(), conflict_filament_vector.end(), unprintable_filament_vec[index].begin(),
-                                                    unprintable_filament_vec[index].end(), insert_iterator<vector<int>>(result_filaments, result_filaments.begin()));
+                                                    unprintable_filament_vec[index].end(), std::insert_iterator<std::vector<int>>(result_filaments, result_filaments.begin()));
                                                 conflict_filament_vector = result_filaments;
                                             }
                                         }

src/libslic3r/Fill/FillSpiralInset.cpp

@@ -352,6 +352,16 @@ void FillSpiralInset::_fill_surface_single(const FillParams& params,
     assert(params.use_arachne);
     assert(this->print_config != nullptr && this->print_object_config != nullptr);
 
+    // Internal solid infill must not add Arachne's standalone thin walls: one of those walls can
+    // become the extra centre point after the spiral has finished. Top and bottom surfaces keep
+    // Arachne, including the centre plug handled by generate_spiral_insets().
+    if (params.extrusion_role == erSolidInfill) {
+        Polylines polylines;
+        this->_fill_surface_single(params, thickness_layers, direction, expolygon, polylines);
+        append(thick_polylines_out, to_thick_polylines(std::move(polylines), scaled<coord_t>(this->spacing)));
+        return;
+    }
+
     // Only a solid surface is worth the variable width walls; a sparse one falls back to plain loops.
     if (params.density <= 0.9999f || params.dont_adjust) {
         Polylines polylines;

src/libslic3r/PerimeterGenerator.cpp

@@ -759,6 +759,59 @@ static void clip_inner_walls_over_top(std::vector<Arachne::VariableWidthLines> &
     }
 }
 
+// ORCA: only_one_wall_top - widest bead of the given walls.
+static coord_t widest_bead(const std::vector<Arachne::VariableWidthLines> &walls)
+{
+    coord_t widest = 0;
+    for (const Arachne::VariableWidthLines &group : walls)
+        for (const Arachne::ExtrusionLine &el : group)
+            for (const Arachne::ExtrusionJunction &j : el.junctions)
+                widest = std::max(widest, j.w);
+    return widest;
+}
+
+// ORCA: only_one_wall_top - length of the walls running further than tolerance from the reference walls, outside the
+// excluded area.
+static double length_off_reference(const std::vector<Arachne::VariableWidthLines> &walls, const Arachne::VariableWidthLines &reference,
+                                   const ExPolygons &excluded, coord_t tolerance)
+{
+    auto append_centerlines = [](const Arachne::VariableWidthLines &lines, Polylines &out) {
+        for (const Arachne::ExtrusionLine &el : lines) {
+            if (el.junctions.size() < 2)
+                continue;
+            Polyline &centerline = out.emplace_back();
+            centerline.points.reserve(el.junctions.size());
+            for (const Arachne::ExtrusionJunction &j : el.junctions)
+                centerline.points.emplace_back(j.p);
+        }
+    };
+    Polylines wall_centerlines;
+    Polylines reference_centerlines;
+    for (const Arachne::VariableWidthLines &group : walls)
+        append_centerlines(group, wall_centerlines);
+    append_centerlines(reference, reference_centerlines);
+
+    Polylines off_reference = diff_pl(wall_centerlines, offset(reference_centerlines, float(tolerance)));
+    if (! excluded.empty())
+        off_reference = diff_pl(off_reference, excluded);
+    return total_length(off_reference);
+}
+
+// ORCA: only_one_wall_top - area covered by the given walls at their local widths.
+static Polygons walls_footprint(const Arachne::VariableWidthLines &walls)
+{
+    Polygons footprint;
+    for (const Arachne::ExtrusionLine &el : walls)
+        for (size_t i = 1; i < el.junctions.size(); ++ i) {
+            const Arachne::ExtrusionJunction &a     = el.junctions[i - 1];
+            const Arachne::ExtrusionJunction &b     = el.junctions[i];
+            const coord_t                     width = std::max(a.w, b.w);
+            if (width > 0)
+                append(footprint, offset(Polyline(a.p, b.p), float(width) / 2.f));
+        }
+    return union_(footprint);
+}
+
 void PerimeterGenerator::split_top_surfaces(const ExPolygons &orig_polygons, ExPolygons &top_fills,
                                             ExPolygons &non_top_polygons, ExPolygons &fill_clip) const {
     // other perimeters
@@ -2546,44 +2599,90 @@ void PerimeterGenerator::process_arachne()
         if (inner_loop_number >= 0) {
             assert(upper_slices != nullptr);
 
-            // Infill contour bounding box.
-            BoundingBox infill_contour_bbox = get_extents(infill_contour);
-            infill_contour_bbox.offset(SCALED_EPSILON);
-            
             coord_t perimeter_width = this->perimeter_flow.scaled_width();
 
-            // Get top ExPolygons from current infill contour.
+            // Filter out areas that are too thin and expand top surface polygons a bit to hide the wall line.
-            Polygons upper_slices_clipped;
+            // ORCA: skip if the top surface area is smaller than "min_width_top_surface"
-            if (object_config->interface_shells) {
+            const float top_surface_min_width = std::max<float>(float(ext_perimeter_spacing) / 4.f + scaled<float>(0.00001), float(scale_(config->min_width_top_surface.get_abs_value(unscale_(perimeter_width)))) / 4.f);
-                auto upper_slicer_same_region = to_expolygons(this->upper_slices_same_region->surfaces);
-                upper_slices_clipped = ClipperUtils::clip_clipper_polygons_with_subject_bbox(upper_slicer_same_region, infill_contour_bbox);
-            } else
-                upper_slices_clipped = ClipperUtils::clip_clipper_polygons_with_subject_bbox(*upper_slices, infill_contour_bbox);
 
-            top_expolygons = diff_ex(infill_contour, upper_slices_clipped);
+            // Get top ExPolygons from the given contour. uncovered reports whether the upper layer leaves any of the
+            // contour uncovered, before bridges and too thin areas are filtered out.
+            auto get_top_expolygons = [&](const ExPolygons &contour, bool &uncovered) {
+                // Contour bounding box.
+                BoundingBox contour_bbox = get_extents(contour);
+                contour_bbox.offset(SCALED_EPSILON);
+
+                Polygons upper_slices_clipped;
+                if (object_config->interface_shells) {
+                    auto upper_slicer_same_region = to_expolygons(this->upper_slices_same_region->surfaces);
+                    upper_slices_clipped = ClipperUtils::clip_clipper_polygons_with_subject_bbox(upper_slicer_same_region, contour_bbox);
+                } else
+                    upper_slices_clipped = ClipperUtils::clip_clipper_polygons_with_subject_bbox(*upper_slices, contour_bbox);
+
+                ExPolygons top = diff_ex(contour, upper_slices_clipped);
+                uncovered      = !top.empty();
+                if (top.empty())
+                    return top;
 
-            if (!top_expolygons.empty()) {
                 if (lower_slices != nullptr) {
                     const float      bridge_offset          = float(std::max<coord_t>(ext_perimeter_spacing, perimeter_width));
-                    const Polygons   lower_slices_clipped   = ClipperUtils::clip_clipper_polygons_with_subject_bbox(*lower_slices, infill_contour_bbox);
+                    const Polygons   lower_slices_clipped   = ClipperUtils::clip_clipper_polygons_with_subject_bbox(*lower_slices, contour_bbox);
-                    const ExPolygons current_slices_bridges = offset_ex(diff_ex(top_expolygons, lower_slices_clipped), bridge_offset);
+                    const ExPolygons current_slices_bridges = offset_ex(diff_ex(top, lower_slices_clipped), bridge_offset);
 
                     // Remove bridges from top surface polygons.
-                    top_expolygons = diff_ex(top_expolygons, current_slices_bridges);
+                    top = diff_ex(top, current_slices_bridges);
                 }
 
-                // Filter out areas that are too thin and expand top surface polygons a bit to hide the wall line.
-                // ORCA: skip if the top surface area is smaller than "min_width_top_surface"
-                const float top_surface_min_width = std::max<float>(float(ext_perimeter_spacing) / 4.f + scaled<float>(0.00001), float(scale_(config->min_width_top_surface.get_abs_value(unscale_(perimeter_width)))) / 4.f);
                 // Shrink the polygon to remove the small areas, then expand it back out plus a maragin to hide the wall line a little.
                 // ORCA: Expand the polygon with half the perimeter width in addition to the contracted amount,
                 // not the full perimeter width as PS does, to enable thin lettering to print on the top surface without nozzle collisions
                 // due to thin lines being generated
-                top_expolygons = offset2_ex(top_expolygons, -top_surface_min_width, top_surface_min_width + float(perimeter_width * 0.85));
+                top = offset2_ex(top, -top_surface_min_width, top_surface_min_width + float(perimeter_width * 0.85));
 
                 // Get final top ExPolygons (bridges were excluded above, so they stay walled).
-                top_expolygons = intersection_ex(top_expolygons, infill_contour);
+                return intersection_ex(top, contour);
+            };
 
+            // Walls with the full count, as generated when the single perimeter feature is disabled. Generated on first use.
+            std::vector<Arachne::VariableWidthLines> full_perimeters;
+            Polygons                                 full_inner_contour;
+            bool                                     full_perimeters_generated = false;
+            auto generate_full_perimeters = [&]() {
+                if (full_perimeters_generated)
+                    return;
+                Arachne::WallToolPaths full_tool_paths(last_p, bead_width_0, perimeter_spacing, coord_t(inner_loop_number + 2), wall_0_inset, layer_height, input_params_tmp);
+                full_perimeters           = full_tool_paths.getToolPaths();
+                full_inner_contour        = full_tool_paths.getInnerContour();
+                full_perimeters_generated = true;
+            };
+
+            // ORCA: the single wall pass allows Arachne 2 beads across a wall, so it fills a wall narrower than 3 outer wall
+            // widths by widening both, where the full pass adds a middle bead. Over the top surface that is the intent;
+            // anywhere else it leaves no room for the inner walls. When the single wall pass's outer walls run away from
+            // the full pass's outside the top surface, take the full pass's outer walls and the area inside them instead.
+            // Walls closer than outer_wall_tolerance count as the same wall: a widened bead's centerline moves by half
+            // the width added, and only beads widened by more than twice the tolerance are looked for.
+            const coord_t outer_wall_tolerance = bead_width_0 / 10;
+            if (widest_bead(perimeters) > bead_width_0 + 2 * outer_wall_tolerance) {
+                // The single wall pass's inner contour where it widens no bead: inside nominal width outer walls.
+                const ExPolygons nominal_infill_contour = offset_ex(last, -float(bead_width_0 + wall_0_inset));
+                bool             nominal_uncovered      = false;
+                // Grown by an outer wall width to take in the outer walls bordering the top surface.
+                const ExPolygons top_zone = offset_ex(get_top_expolygons(nominal_infill_contour, nominal_uncovered), float(bead_width_0));
+                if (nominal_uncovered) {
+                    generate_full_perimeters();
+                    if (! full_perimeters.empty() && ! full_perimeters.front().empty() &&
+                        length_off_reference(perimeters, full_perimeters.front(), top_zone, outer_wall_tolerance) > double(perimeter_width)) {
+                        perimeters     = { full_perimeters.front() };
+                        infill_contour = diff_ex(nominal_infill_contour, walls_footprint(full_perimeters.front()), ApplySafetyOffset::Yes);
+                    }
+                }
+            }
+
+            bool uncovered = false;
+            top_expolygons = get_top_expolygons(infill_contour, uncovered);
+
+            if (uncovered) {
                 // ORCA: onion the real region (inside the outer wall) so the remaining walls follow the actual
                 // geometry, then cut away the parts over the top surface. Re-onioning the non-top complement
                 // instead - the fallback when there is no top fill - walls the top/non-top interface and rings
@@ -2612,11 +2711,11 @@ void PerimeterGenerator::process_arachne()
                 perimeters.insert(perimeters.end(), inner_perimeters.begin(), inner_perimeters.end());
                 infill_contour = union_ex(top_expolygons, inner_wall_tool_paths.getInnerContour());
             } else {
-                // There is no top surface ExPolygon, so we call Arachne again with parameters
+                // There is no top surface ExPolygon, so use the walls generated like when the single perimeter
-                // like when the single perimeter feature is disabled.
+                // feature is disabled.
-                Arachne::WallToolPaths no_single_perimeter_tool_paths(last_p, bead_width_0, perimeter_spacing, coord_t(inner_loop_number + 2), wall_0_inset, layer_height, input_params_tmp);
+                generate_full_perimeters();
-                perimeters     = no_single_perimeter_tool_paths.getToolPaths();
+                perimeters     = std::move(full_perimeters);
-                infill_contour = union_ex(no_single_perimeter_tool_paths.getInnerContour());
+                infill_contour = union_ex(full_inner_contour);
             }
         }
         //PS

src/slic3r/GUI/3DScene.cpp

@@ -1580,7 +1580,7 @@ bool GLVolumeCollection::check_outside_state(const BuildVolume &build_volume, Mo
                     {
                         std::vector<int> result_filaments;
                         //result_filaments.reserve(conflict_filaments.size());
-                        std::set_intersection (conflict_filament_vector.begin(), conflict_filament_vector.end(), unprintable_filament_vec[index].begin(), unprintable_filament_vec[index].end(), insert_iterator<vector<int>>(result_filaments, result_filaments.begin()));
+                        std::set_intersection (conflict_filament_vector.begin(), conflict_filament_vector.end(), unprintable_filament_vec[index].begin(), unprintable_filament_vec[index].end(), std::insert_iterator<std::vector<int>>(result_filaments, result_filaments.begin()));
                         conflict_filament_vector = result_filaments;
                     }
                 }

src/slic3r/GUI/AMSMaterialsSetting.cpp

@@ -974,8 +974,8 @@ bool AMSMaterialsSetting::Show(bool show)
 
 static void _collect_filament_info(const wxString& shown_name,
                                    const Preset& filament,
-                                   unordered_map<wxString, wxString>& query_filament_vendors,
+                                   std::unordered_map<wxString, wxString>& query_filament_vendors,
-                                   unordered_map<wxString, wxString>& query_filament_types)
+                                   std::unordered_map<wxString, wxString>& query_filament_types)
 {
     query_filament_vendors[shown_name] = filament.config.get_filament_vendor();
     query_filament_types[shown_name] = filament.config.get_filament_type();

src/slic3r/GUI/Auxiliary.cpp

@@ -855,14 +855,14 @@ void AuxiliaryPanel::Split(const std::string &src, const std::string &separator,
     dest.clear();
     index = str.find_first_of(separator, start);
     do {
-        if (index != string::npos) {
+        if (index != std::string::npos) {
             substring = str.substr(start, index - start);
             dest.push_back(substring);
             start = index + separator.size();
             index = str.find(separator, start);
-            if (start == string::npos) break;
+            if (start == std::string::npos) break;
         }
-    } while (index != string::npos);
+    } while (index != std::string::npos);
 
     // the last part
     substring = str.substr(start);

src/slic3r/GUI/CalibrationWizardPresetPage.cpp

@@ -1307,7 +1307,7 @@ void CalibrationPresetPage::stripWhiteSpace(std::string& str)
 {
     if (str == "") { return; }
 
-    string::iterator cur_it;
+    std::string::iterator cur_it;
     cur_it = str.begin();
 
     while (cur_it != str.end()) {
@@ -2597,7 +2597,7 @@ void CalibrationPresetPage::update_multi_extruder_filament_combobox(const std::s
     int ams_id_int = 0;
     try {
         if (!ams_id.empty())
-            ams_id_int = stoi(ams_id.c_str());
+            ams_id_int = std::stoi(ams_id.c_str());
 
     } catch (...) {}
 
@@ -2685,7 +2685,7 @@ void CalibrationPresetPage::update_filament_combobox(std::string ams_id)
     int ams_id_int = 0;
     try {
         if (!ams_id.empty())
-            ams_id_int = stoi(ams_id.c_str());
+            ams_id_int = std::stoi(ams_id.c_str());
 
     } catch (...) {}
 

src/slic3r/GUI/CreatePresetsDialog.cpp

@@ -345,7 +345,7 @@ static std::string get_curr_timestmp()
     // return timestampString;
 }
 
-static void get_filament_compatible_printer(Preset* preset, vector<std::string>& printers)
+static void get_filament_compatible_printer(Preset* preset, std::vector<std::string>& printers)
 {
     auto compatible_printers = dynamic_cast<ConfigOptionStrings *>(preset->config.option("compatible_printers"));
     if (compatible_printers == nullptr) return;
@@ -1579,7 +1579,7 @@ void CreateFilamentPresetDialog::sort_printer_by_nozzle(std::vector<std::pair<st
 {
     std::unordered_map<std::string, float> nozzle_diameter = nozzle_diameter_map;
     std::sort(printer_name_to_filament_preset.begin(), printer_name_to_filament_preset.end(),
-              [&nozzle_diameter](const std::pair<string, T> &a, const std::pair<string, T> &b) {
+              [&nozzle_diameter](const std::pair<std::string, T> &a, const std::pair<std::string, T> &b) {
                   size_t nozzle_index_a = a.first.find(" nozzle");
                   size_t nozzle_index_b = b.first.find(" nozzle");
                   if (nozzle_index_a == std::string::npos || nozzle_index_b == std::string::npos) return a.first < b.first;
@@ -3141,7 +3141,7 @@ void CreatePrinterPresetDialog::set_current_visible_printer()
 
 wxArrayString CreatePrinterPresetDialog::printer_preset_sort_with_nozzle_diameter(const VendorProfile &vendor_profile, float nozzle_diameter)
 {
-    std::vector<pair<float, std::string>> preset_sort;
+    std::vector<std::pair<float, std::string>> preset_sort;
 
     auto get_nozzle_size_for_printer_model = [this](const std::string & model_name) -> size_t {
         auto iter = m_printer_name_to_preset.find(model_name);
@@ -4962,7 +4962,7 @@ wxBoxSizer *CreatePresetForPrinterDialog::create_selected_filament_preset_sizer(
 
     m_selected_printer->Bind(wxEVT_COMBOBOX, [this](wxCommandEvent &e) {
         wxString printer_name = m_selected_printer->GetStringSelection();
-        std::unordered_map<string, std::vector<std::shared_ptr<Preset>>>::iterator filament_iter = m_printer_compatible_filament_presets.find(into_u8(printer_name));
+        std::unordered_map<std::string, std::vector<std::shared_ptr<Preset>>>::iterator filament_iter = m_printer_compatible_filament_presets.find(into_u8(printer_name));
         if (m_printer_compatible_filament_presets.end() != filament_iter) {
             filament_choice_to_filament_preset.clear();
             wxArrayString filament_choices;

src/slic3r/GUI/DeviceCore/DevFilaSystem.cpp

@@ -161,7 +161,7 @@ DevAms::~DevAms()
     m_trays.clear();
 }
 
-static unordered_map<int, wxString> s_ams_display_formats = {
+static std::unordered_map<int, wxString> s_ams_display_formats = {
     {DevAms::AMS,      "AMS-%d"},
     {DevAms::AMS_LITE, "AMS Lite-%d"},
     {DevAms::N3F,      "AMS 2 PRO-%d"},

src/slic3r/GUI/DeviceCore/DevFirmware.h

@@ -51,10 +51,10 @@ public:
     bool isCuttingModule() const { return product_name.Contains("Cutting Module"); }
     bool isRotary() const { return product_name.Contains("Rotary"); }// Rotary Attachment
     bool isExtinguishSystem() const { return product_name.Contains("Extinguishing System"); }// Auto Fire Extinguishing System
-    bool isWTM() const { return name.find("wtm") != string::npos; } // nozzle
+    bool isWTM() const { return name.find("wtm") != std::string::npos; } // nozzle
     bool isExhaustFan() const { return product_name.Contains("Exhaust Fan"); }
-    bool isHmshub() const { return product_name.find("Filament Buffer") != string::npos; }
+    bool isHmshub() const { return product_name.find("Filament Buffer") != std::string::npos; }
-    bool isFilaTrackSwitch() const { return product_name.find("Filament Track") != string::npos; }
+    bool isFilaTrackSwitch() const { return product_name.find("Filament Track") != std::string::npos; }
 
 };
 

src/slic3r/GUI/DeviceCore/DevMappingNozzle.cpp

@@ -251,7 +251,7 @@ int DevNozzleMappingCtrl::CtrlGetAutoNozzleMappingV1(Slic3r::GUI::Plater* plater
 
 void DevNozzleMappingCtrl::ParseAutoNozzleMapping(const json& print_jj)
 {
-    if (print_jj.contains("command") && print_jj["command"].get<string>() == "get_auto_nozzle_mapping") {
+    if (print_jj.contains("command") && print_jj["command"].get<std::string>() == "get_auto_nozzle_mapping") {
         if (print_jj.contains("sequence_id") && print_jj["sequence_id"] == m_sequence_id) {
             Clear();
             DevJsonValParser::ParseVal(print_jj, "result", m_result);

src/slic3r/GUI/DeviceCore/DevNozzleSystem.cpp

@@ -424,7 +424,7 @@ void DevNozzleSystem::ClearNozzles()
 
 // ---- parsing ----------------------------------------------------------------------------------------
 
-static unordered_map<string, NozzleFlowType> _str2_nozzle_flow_type = {
+static std::unordered_map<std::string, NozzleFlowType> _str2_nozzle_flow_type = {
     {"S", NozzleFlowType::S_FLOW},
     {"H", NozzleFlowType::H_FLOW},
     {"A", NozzleFlowType::S_FLOW},
@@ -434,7 +434,7 @@ static unordered_map<string, NozzleFlowType> _str2_nozzle_flow_type = {
     {"B", NozzleFlowType::E_FLOW}, // E3D High Flow -> nvtE3DHighFlow
 };
 
-static unordered_map<string, NozzleType> _str2_nozzle_type = {
+static std::unordered_map<std::string, NozzleType> _str2_nozzle_type = {
     {"00", NozzleType::ntStainlessSteel},
     {"01", NozzleType::ntHardenedSteel},
     {"05", NozzleType::ntTungstenCarbide}

src/slic3r/GUI/DeviceErrorDialog.cpp

@@ -368,7 +368,7 @@ wxString DeviceErrorDialog::parse_error_level(int error_code)
     }
 }
 
-static const std::unordered_set<string> s_jump_liveview_error_codes = { "0300-8003", "0300-8002", "0300-800A"};
+static const std::unordered_set<std::string> s_jump_liveview_error_codes = { "0300-8003", "0300-8002", "0300-800A"};
 wxString DeviceErrorDialog::show_error_code(int error_code)
 {
     if (m_error_code == error_code) { return wxEmptyString;}

src/slic3r/GUI/DeviceManager.cpp

@@ -3029,7 +3029,7 @@ int MachineObject::parse_json(std::string tunnel, std::string payload, bool key_
 
         uint64_t t_utc = j.value("t_utc", 0ULL);
         if (t_utc > 0) {
-            last_utc_time = std::chrono::system_clock::time_point(t_utc * 1ms);
+            last_utc_time = std::chrono::system_clock::time_point(t_utc * std::chrono::milliseconds(1));
             std::chrono::system_clock::time_point now = std::chrono::system_clock::now();
             auto millisec_since_epoch = std::chrono::duration_cast<std::chrono::milliseconds>(now.time_since_epoch()).count();
             auto delay = millisec_since_epoch - t_utc;  //ms
@@ -3103,7 +3103,7 @@ int MachineObject::parse_json(std::string tunnel, std::string payload, bool key_
                         DevFirmwareVersionInfo ver_info;
                         ver_info.name = (*it)["name"].get<std::string>();
                         if ((*it).contains("product_name"))
-                            ver_info.product_name = wxString::FromUTF8((*it)["product_name"].get<string>());
+                            ver_info.product_name = wxString::FromUTF8((*it)["product_name"].get<std::string>());
                         if ((*it).contains("sw_ver"))
                             ver_info.sw_ver = (*it)["sw_ver"].get<std::string>();
                         if ((*it).contains("sw_new_ver"))

src/slic3r/GUI/EditGCodeDialog.cpp

@@ -294,8 +294,8 @@ wxDataViewItem EditGCodeDialog::add_presets_placeholders()
 
 
     // Orca: create subgroups from the pages of the tabs
-    auto init_from_tab = [this, full_config](wxDataViewItem parent, Tab* tab, const set<string>& preset_keys){
+    auto init_from_tab = [this, full_config](wxDataViewItem parent, Tab* tab, const std::set<std::string>& preset_keys){
-        set extra_keys(preset_keys);
+        std::set extra_keys(preset_keys);
         for (const auto& page : tab->m_pages) {
             // ORCA: Pull icons from tabs for subgroups, icons are hidden on tabs
             std::string icon_name = "empty"; // use empty icon if not defined
@@ -549,7 +549,7 @@ void ParamsNode::RefreshSearch(const wxString& search_text)
 
     if (GetEnabledChildren().empty())
         if (auto pos = text.find(search_text); IsParamNode() && pos != wxString::npos) {
-            m_highlight_index = make_unique<pair<int, int>>(pos, search_text.Len());
+            m_highlight_index = make_unique<std::pair<int, int>>(pos, search_text.Len());
             Enable();
         } else {
             Disable();

src/slic3r/GUI/Field.cpp

@@ -702,11 +702,11 @@ void Field::get_value_by_opt_type(wxString& str, const bool check_value/* = true
                 set_value(str, true);
             }
         } else if (m_opt.opt_key == "sparse_infill_rotate_template" || m_opt.opt_key == "solid_infill_rotate_template") {
-            string ustr(str.utf8_string());
+            std::string ustr(str.utf8_string());
             if (!ConfigOptionFloats::validate_string(ustr)) {
-                string      v;
+                std::string v;
                 std::smatch match;
-                string      ps = (m_opt.opt_key == "sparse_infill_rotate_template") ?
+                std::string ps = (m_opt.opt_key == "sparse_infill_rotate_template") ?
                                      u8"[BT][!]?|[#][\\d]+[!]?|[+\\-]?[\\d.]+[%]?[*]?[\\d]*[/NnZz$LlUuQq~^|#]?[+\\-]?[\\d.]*[%#\'\"cm]?[m]?[BT]?[!*]?" :
                                      u8"[#][\\d]+[!]?|[+\\-]?[\\d.]+[%]?[*]?[\\d]*[/NnZz$LlUuQq~^|#]?[+\\-]?[\\d.]*[%#\'\"cm]?[m]?[!*]?";
 
@@ -729,7 +729,7 @@ void Field::get_value_by_opt_type(wxString& str, const bool check_value/* = true
             }
             break;
         } else if (m_opt.opt_key == "extra_solid_infills") {
-            string ustr(str.utf8_string());
+            std::string ustr(str.utf8_string());
             // New rule: accept either interval form (N or N#K) or explicit list (e.g. 1,7,9), with optional quotes.
             const std::regex rx_interval(u8R"(^\s*['"]?\s*\d+\s*(?:#\s*\d*)?\s*['"]?\s*$)");
             // List entries may be plain numbers or number with optional #K count, e.g., 5, 9#2, 18

src/slic3r/GUI/GCodeViewer.cpp

@@ -2816,7 +2816,7 @@ void GCodeViewer::render_all_plates_stats(const std::vector<const GCodeProcessor
         }
         return ret;
     };
-    auto calculate_offsets = [max_width, window_padding](const std::vector<std::pair<std::string, std::vector<::string>>>& title_columns, float extra_size = 0.0f) {
+    auto calculate_offsets = [max_width, window_padding](const std::vector<std::pair<std::string, std::vector<std::string>>>& title_columns, float extra_size = 0.0f) {
         const ImGuiStyle& style = ImGui::GetStyle();
         std::vector<float> offsets;
         offsets.push_back(max_width(title_columns[0].second, title_columns[0].first, extra_size) + 3.0f * style.ItemSpacing.x + style.WindowPadding.x);
@@ -2963,7 +2963,7 @@ void GCodeViewer::render_all_plates_stats(const std::vector<const GCodeProcessor
         }
         ::sprintf(buff, "%.2f", longest_str);
 
-        std::vector<std::pair<std::string, std::vector<::string>>> title_columns;
+        std::vector<std::pair<std::string, std::vector<std::string>>> title_columns;
         if (displayed_columns & ColumnData::Model) {
             title_columns.push_back({ _u8L("Filament"), {""} });
             title_columns.push_back({ _u8L("Model"), {buff} });
@@ -3184,7 +3184,7 @@ void GCodeViewer::render_legend_color_arr_recommen(float window_padding)
     float ams_item_height = 0;
     float filament_group_item_align_width = 0;
     {
-        float three_words_width    = imgui.calc_text_size("ABC"sv).x;
+        float three_words_width    = imgui.calc_text_size(std::string_view("ABC")).x;
         const int line_capacity = 4;
 
         for (const auto& extruder_filaments : {m_left_extruder_filament,m_right_extruder_filament })
@@ -3195,8 +3195,8 @@ void GCodeViewer::render_legend_color_arr_recommen(float window_padding)
                 for (int j = idx; j < extruder_filaments.size() && j < idx + line_capacity; ++j) {
                     auto text_info = imgui.calculate_filament_group_text_size(get_filament_display_type(extruder_filaments[j]));
                     auto text_size = std::get<0>(text_info);
-                    filament_group_item_align_width = max(filament_group_item_align_width, text_size.x);
+                    filament_group_item_align_width = std::max(filament_group_item_align_width, text_size.x);
-                    text_line_height = max(text_line_height, text_size.y);
+                    text_line_height = std::max(text_line_height, text_size.y);
                 }
                 container_height += (three_words_width * 1.3f + text_line_height );
             }
@@ -3589,7 +3589,7 @@ void GCodeViewer::render_legend(float &legend_height, int canvas_width, int canv
         return ret;
     };
 
-    auto calculate_offsets = [max_width, this](const std::vector<std::pair<std::string, std::vector<::string>>>& title_columns, float extra_size = 0.0f) {
+    auto calculate_offsets = [max_width, this](const std::vector<std::pair<std::string, std::vector<std::string>>>& title_columns, float extra_size = 0.0f) {
             const ImGuiStyle& style = ImGui::GetStyle();
             std::vector<float> offsets;
             // ORCA increase spacing for more readable format. Using direct number requires much less code change in here. GetTextLineHeight for additional spacing for icon_size
@@ -4014,7 +4014,7 @@ void GCodeViewer::render_legend(float &legend_height, int canvas_width, int canv
         total_filaments.push_back(buffer);
 
 
-        std::vector<std::pair<std::string, std::vector<::string>>> title_columns;
+        std::vector<std::pair<std::string, std::vector<std::string>>> title_columns;
         if (displayed_columns & ColumnData::Model) {
             title_columns.push_back({ _u8L("Filament"), {""} });
             title_columns.push_back({ _u8L("Model"), total_filaments });

src/slic3r/GUI/GLCanvas3D.cpp

@@ -7970,9 +7970,16 @@ void GLCanvas3D::_render_fps_overlay(int fps) const
     const float margin = 10.0f * get_scale();
     const ImVec2 display_size = ImGui::GetIO().DisplaySize;
     ImVec2 pos(display_size.x - margin, margin);
+    // Last frame's size; zero until the overlay has been shown once.
+    const ImGuiWindow* self = ImGui::FindWindowByName("###fps_overlay");
+    const float left = pos.x - (self != nullptr ? self->Size.x : 0.0f);
     // The Preview legend takes the top-right corner.
     if (const ImGuiWindow* legend = ImGui::FindWindowByName("Legend"); m_canvas_type == ECanvasType::CanvasPreview && legend != nullptr && legend->Active)
         pos = ImVec2(legend->Pos.x - margin, legend->Pos.y);
+    // The toolbar row can reach the corner on a narrow canvas; stack the overlay below it then.
+    else if (m_main_toolbar.is_enabled() &&
+             get_main_toolbar_offset() + m_main_toolbar.get_width() + m_separator_toolbar.get_width() + m_gizmos.get_scaled_total_width() + m_assemble_view_toolbar.get_width() > left)
+        pos.y = std::max(m_main_toolbar.get_height(), m_gizmos.get_scaled_total_height()) + margin;
     ImGui::SetNextWindowPos(pos, ImGuiCond_Always, ImVec2(1.0f, 0.0f));
     ImGui::SetNextWindowBgAlpha(0.35f);
     ImGui::PushStyleVar(ImGuiStyleVar_WindowRounding, 8.0f * get_scale());
@@ -10553,7 +10560,7 @@ float GLCanvas3D::_render_assembly_tooltip_button(ImGuiWrapper* imgui_wrapper) c
 
     float same_line_width = button_size.x * 1.8; // with an space size
     ImGui::SameLine(same_line_width);
-    same_line_width = imgui_wrapper->calc_text_size("|"sv).x + same_line_width + imgui_wrapper->calc_text_size("  "sv).x;
+    same_line_width = imgui_wrapper->calc_text_size(std::string_view("|")).x + same_line_width + imgui_wrapper->calc_text_size(std::string_view("  ")).x;
     imgui_wrapper->text_colored(ImGuiWrapper::COL_ACTIVE, "|");
     ImGui::SameLine(same_line_width);
 
@@ -10579,7 +10586,7 @@ void GLCanvas3D::_render_assemble_control()
 
     const float text_padding = 7.0f;
     const float slider_width = 60.0f;
-    const float value_size = imgui->calc_text_size("3.00"sv).x + text_padding * 2;
+    const float value_size = imgui->calc_text_size(std::string_view("3.00")).x + text_padding * 2;
     const float item_spacing = imgui->get_item_spacing().x;
     ImVec2 window_padding = ImGui::GetStyle().WindowPadding;
 
@@ -10616,7 +10623,7 @@ void GLCanvas3D::_render_assemble_control()
         int selection_idx = m_selection.get_volume_selection_mode() == Selection::Instance ? 0 : 1;
         auto label         = _u8L("Selection Mode") + ":" ;
         auto label_width   = imgui->calc_text_size(label).x ;
-        auto item_width    = imgui->calc_text_size(_u8L("Object")).x * 2.5 + imgui->calc_text_size("xx"sv).x+ item_spacing;
+        auto item_width    = imgui->calc_text_size(_u8L("Object")).x * 2.5 + imgui->calc_text_size(std::string_view("xx")).x+ item_spacing;
         //render imgui
         ImGui::AlignTextToFramePadding();
         ImGui::PushItemWidth(label_width);

src/slic3r/GUI/GUI_App.cpp

@@ -9035,7 +9035,7 @@ std::map<std::string, std::string> GUI_App::get_delete_cache_presets_lock()
 
 void GUI_App::process_delete_presets()
 {
-    std::map<string, string> delete_cache_presets = get_delete_cache_presets_lock();
+    std::map<std::string, std::string> delete_cache_presets = get_delete_cache_presets_lock();
     for (auto it = delete_cache_presets.begin(); it != delete_cache_presets.end();) {
         if (it->first.empty()) continue;
         std::string del_setting_id = it->first;
@@ -10063,7 +10063,7 @@ bool is_soluble_filament(int extruder_id)
     return support_option->get_at(0);
 };
 
-bool has_filaments(const std::vector<string>& model_filaments) {
+bool has_filaments(const std::vector<std::string>& model_filaments) {
     auto &filament_presets = Slic3r::GUI::wxGetApp().preset_bundle->filament_presets;
     if (!Slic3r::GUI::wxGetApp().plater()) return false;
     auto model_objects = Slic3r::GUI::wxGetApp().plater()->model().objects;
@@ -10098,7 +10098,7 @@ bool is_support_filament(int extruder_id, bool strict_check)
     Slic3r::ConfigOptionBools *support_option = dynamic_cast<Slic3r::ConfigOptionBools *>(filament->config.option("filament_is_support"));
 
     if(!strict_check &&(filament_type == "PETG" || filament_type == "PLA")) {
-        std::vector<string> model_filaments;
+        std::vector<std::string> model_filaments;
         if (filament_type == "PETG")
             model_filaments.emplace_back("PLA");
         else {

src/slic3r/GUI/GUI_ObjectList.cpp

@@ -1108,7 +1108,7 @@ void ObjectList::update_name_column_width() const
         }
     }
 
-    GetColumn(colName)->SetWidth(max(0, client_size.x - (others_width)*em));
+    GetColumn(colName)->SetWidth(std::max(0, client_size.x - (others_width)*em));
 }
 
 void ObjectList::set_filament_column_hidden(const bool hide) const
@@ -3970,7 +3970,7 @@ wxDataViewItem ObjectList::add_settings_item(wxDataViewItem parent_item, const D
         if (config->opt_float("layer_height") == object_cfg->opt_float("layer_height")) {
             SettingsFactory::Bundle new_cat_options;
             for (auto cat_opt : cat_options) {
-                std::vector<string> temp;
+                std::vector<std::string> temp;
                 for (auto value : cat_opt.second) {
                     if (value != "layer_height")
                         temp.push_back(value);

src/slic3r/GUI/Gizmos/GLGizmoCut.cpp

@@ -3651,7 +3651,7 @@ void GLGizmoCut3D::perform_cut(const Selection& selection)
                         // model_name     failing reason
                         std::vector<std::pair<std::string, std::string>> failed_models;
                         auto                                             plater = wxGetApp().plater();
-                        auto fix_and_update_progress = [keep_painting](ModelObject *model_object, const int vol_idx, const string &model_name, ProgressDialog &progress_dlg,
+                        auto fix_and_update_progress = [keep_painting](ModelObject *model_object, const int vol_idx, const std::string &model_name, ProgressDialog &progress_dlg,
                                                                       std::vector<std::string> &succes_models, std::vector<std::pair<std::string, std::string>> &failed_models) {
                             wxString msg = _L("Repairing model object");
                             msg += ": " + from_u8(model_name) + "\n";

src/slic3r/GUI/Gizmos/GizmoObjectManipulation.cpp

@@ -801,7 +801,7 @@ void GizmoObjectManipulation::do_render_move_window(ImGuiWrapper *imgui_wrapper,
         imgui_wrapper->calc_text_size(_L("World")).x,
         imgui_wrapper->calc_text_size(_L("Object")).x,
         imgui_wrapper->calc_text_size(_L("Part")).x
-    }) + imgui_wrapper->calc_text_size("xxx"sv).x + imgui_wrapper->scaled(3.5f);
+    }) + imgui_wrapper->calc_text_size(std::string_view("xxx")).x + imgui_wrapper->scaled(3.5f);
     float label_max = std::max({
         imgui_wrapper->calc_text_size(_L("Position")).x,
         imgui_wrapper->calc_text_size(_L("Relative")).x
@@ -1181,7 +1181,7 @@ void GizmoObjectManipulation::do_render_scale_input_window(ImGuiWrapper* imgui_w
         imgui_wrapper->calc_text_size(_L("World")).x,
         imgui_wrapper->calc_text_size(_L("Object")).x,
         imgui_wrapper->calc_text_size(_L("Part")).x
-    }) + imgui_wrapper->calc_text_size("xxx"sv).x + imgui_wrapper->scaled(3.5f);
+    }) + imgui_wrapper->calc_text_size(std::string_view("xxx")).x + imgui_wrapper->scaled(3.5f);
     float label_max = std::max({
         imgui_wrapper->calc_text_size(_L_CONTEXT("Scale", "Noun")).x,
         imgui_wrapper->calc_text_size(_L("Size")).x

src/slic3r/GUI/HMS.cpp

@@ -32,7 +32,7 @@ static const char* HMS_LOCAL_IMG_PATH = "hms/local_image";
 
 // the local HMS info
 // Orca: dev-id-type set trimmed to the devices Orca ships local HMS images for
-static unordered_set<string> package_dev_id_types {"094", "239", "093", "22E"};
+static std::unordered_set<std::string> package_dev_id_types {"094", "239", "093", "22E"};
 
 // Orca: HMS should be disabled when stealth mode is on or networking is not installed
 static bool should_disable_hms()
@@ -344,17 +344,17 @@ wxString HMSQuery::query_hms_msg(const std::string& dev_id, const std::string& l
     return _query_hms_msg(dev_id.substr(0, 3), long_error_code, lang_code);
 }
 
-string HMSQuery::get_dev_id_type(const MachineObject* obj) const
+std::string HMSQuery::get_dev_id_type(const MachineObject* obj) const
 {
     if (obj)
     {
         return obj->get_dev_id().substr(0, 3);
     }
 
-    return string();
+    return std::string();
 }
 
-wxString HMSQuery::_query_hms_msg(const string& dev_id_type, const string& long_error_code, const string& lang_code)
+wxString HMSQuery::_query_hms_msg(const std::string& dev_id_type, const std::string& long_error_code, const std::string& lang_code)
 {
     if (long_error_code.empty())
     {
@@ -425,9 +425,9 @@ wxString HMSQuery::_query_hms_msg(const string& dev_id_type, const string& long_
     return wxEmptyString;
 }
 
-bool HMSQuery::_is_internal_error(const string &dev_id_type,
+bool HMSQuery::_is_internal_error(const std::string &dev_id_type,
-                                  const string &error_code,
+                                  const std::string &error_code,
-                                  const string &lang_code)
+                                  const std::string &lang_code)
 {
     init_hms_info(dev_id_type);
     auto iter = m_hms_info_jsons.find(dev_id_type);

src/slic3r/GUI/IMSlider.cpp

@@ -1405,7 +1405,7 @@ void IMSlider::render_input_custom_gcode(std::string custom_gcode)
 }
 
 void IMSlider::do_go_to_layer(size_t layer_number) {
-    layer_number = clamp((int)layer_number, m_min_value, m_max_value);
+    layer_number = std::clamp((int)layer_number, m_min_value, m_max_value);
     GetSelection() == ssLower ? SetLowerValue(layer_number) : SetHigherValue(layer_number);
 }
 

src/slic3r/GUI/Jobs/PrintJob.cpp

@@ -334,7 +334,7 @@ void PrintJob::process(Ctl &ctl)
         auto origin_profile_id = model_info->metadata_items.find(BBL_DESIGNER_PROFILE_ID_TAG);
         if (origin_profile_id != model_info->metadata_items.end()) {
             try {
-                params.origin_profile_id    = stoi(origin_profile_id->second.c_str());
+                params.origin_profile_id    = std::stoi(origin_profile_id->second.c_str());
             }
             catch(...) {}
         }

src/slic3r/GUI/NotificationManager.cpp

@@ -536,12 +536,12 @@ void NotificationManager::PopNotification::count_lines()
 		return;
 
 	// handle with marks
-    if (pos_start == string::npos && pos_end == string::npos) {
+    if (pos_start == std::string::npos && pos_end == std::string::npos) {
         pos_start = text.find(error_start);
-        if (pos_start != string::npos) {
+        if (pos_start != std::string::npos) {
             text.erase(pos_start, error_start.length());
             pos_end = text.find(error_end);
-            if (pos_end != string::npos) {
+            if (pos_end != std::string::npos) {
                 text.erase(pos_end, error_end.length());
             }
         }
@@ -675,7 +675,7 @@ void NotificationManager::PopNotification::bbl_render_block_notif_text(ImGuiWrap
 			if (m_text1.size() > m_endlines[i])
 				last_end += (m_text1[m_endlines[i]] == '\n' || m_text1[m_endlines[i]] == ' ' ? 1 : 0);
 
-			if (pos_start != string::npos && pos_end != string::npos && m_endlines[i] - line.length() >= pos_start && m_endlines[i] <= pos_end) {
+			if (pos_start != std::string::npos && pos_end != std::string::npos && m_endlines[i] - line.length() >= pos_start && m_endlines[i] <= pos_end) {
 				push_style_color(ImGuiCol_Text, m_ErrorColor, m_state == EState::FadingOut, m_current_fade_opacity);
 				imgui.text(line.c_str());
 				ImGui::PopStyleColor();
@@ -737,7 +737,7 @@ void NotificationManager::PopNotification::render_text(ImGuiWrapper& imgui, cons
 			if (m_text1.size() > m_endlines[i])
 				last_end += (m_text1[m_endlines[i]] == '\n' || m_text1[m_endlines[i]] == ' ' ? 1 : 0);
 
-            if (pos_start != string::npos && pos_end != string::npos&& m_endlines[i] - line.length() >= pos_start && m_endlines[i] <= pos_end) {
+            if (pos_start != std::string::npos && pos_end != std::string::npos&& m_endlines[i] - line.length() >= pos_start && m_endlines[i] <= pos_end) {
                 push_style_color(ImGuiCol_Text, m_ErrorColor, m_state == EState::FadingOut, m_current_fade_opacity);
                 imgui.text(line.c_str());
                 ImGui::PopStyleColor();

src/slic3r/GUI/NotificationManager.hpp

@@ -631,8 +631,8 @@ private:
 		// Aditional text after hypertext - currently not used
 		std::string      m_text2;
 		// mark for render operation
-		size_t           pos_start = string::npos;
+		size_t           pos_start = std::string::npos;
-		size_t	         pos_end = string::npos;
+		size_t	         pos_end = std::string::npos;
 		std::string      error_start = "<Error>";
 		std::string      error_end = "</Error>";
 

src/slic3r/GUI/PartSkipDialog.cpp

@@ -86,7 +86,7 @@ PartSkipDialog::PartSkipDialog(wxWindow *parent) : DPIDialog(parent, wxID_ANY, _
 {
     std::time_t       t = std::time(0);
     std::stringstream buf;
-    buf << put_time(std::localtime(&t), "%a_%b_%d_%H_%M_%S/");
+    buf << std::put_time(std::localtime(&t), "%a_%b_%d_%H_%M_%S/");
     m_timestamp = buf.str();
 
     SetBackgroundColour(*wxWHITE);
@@ -402,7 +402,7 @@ std::string PartSkipDialog::create_tmp_path()
     return tmp_path;
 }
 
-bool PartSkipDialog::is_local_file_existed(const std::vector<string> &local_paths)
+bool PartSkipDialog::is_local_file_existed(const std::vector<std::string> &local_paths)
 {
     for (auto path : local_paths) {
         if (!std::filesystem::exists(path)) { return false; }
@@ -703,8 +703,8 @@ void PartSkipDialog::InitDialogUI()
     m_parts_state.clear();
     m_parts_name.clear();
 
-    string pick_img   = m_local_paths[0];
+    std::string pick_img   = m_local_paths[0];
-    string slice_info = m_local_paths[2];
+    std::string slice_info = m_local_paths[2];
 
     m_switch_drag_btn->SetIcon("canvas_drag");
     m_switch_drag_btn->SetBackgroundColor(*wxWHITE);

src/slic3r/GUI/PartSkipDialog.hpp

@@ -139,11 +139,11 @@ private:
     boost::shared_ptr<PrinterFileSystem> m_file_sys;
     std::string                          m_timestamp;
     std::string                          m_tmp_path;
-    std::vector<string>                  m_local_paths;
+    std::vector<std::string>             m_local_paths;
-    std::vector<string>                  m_target_paths;
+    std::vector<std::string>             m_target_paths;
     std::string                          create_tmp_path();
 
-    bool is_local_file_existed(const std::vector<string> &local_paths);
+    bool is_local_file_existed(const std::vector<std::string> &local_paths);
 
     void DownloadPartsFile();
     void OnFileSystemEvent(wxCommandEvent &event);

src/slic3r/GUI/Plater.cpp

@@ -361,7 +361,7 @@ wxDEFINE_EVENT(EVT_NOTICE_FULL_SCREEN_CHANGED, IntEvent);
 #define PRINTER_PANEL_RADIUS (6) // ORCA
 #define BTN_SYNC_SIZE (wxSize(FromDIP(96), FromDIP(98)))
 
-static string get_diameter_string(float diameter)
+static std::string get_diameter_string(float diameter)
 {
     std::ostringstream stream; // ORCA ensure 0.25 returned as 0.25. previous code returned as 0.2 because of std::setprecision(1)
     stream << std::fixed << std::setprecision(2) << diameter;  // Use 2 decimals to capture 0.25 / 0.15 reliably
@@ -6327,7 +6327,7 @@ void Sidebar::sync_ams_list(bool is_from_big_sync_btn)
     }
 
     // BBS:Record consumables information before synchronization
-    std::vector<string> color_before_sync;
+    std::vector<std::string> color_before_sync;
     std::vector<bool>   is_support_before;
     DynamicPrintConfig& project_config = wxGetApp().preset_bundle->project_config;
     ConfigOptionStrings* color_opt = project_config.option<ConfigOptionStrings>("filament_colour");
@@ -12766,7 +12766,7 @@ void Plater::priv::on_select_preset(wxCommandEvent &evt)
     Vec3d old_plate_pos = old_plate->get_center_origin();
 
     // BBS: Save the model in the current platelist
-    std::vector<vector<int> > plate_object;
+    std::vector<std::vector<int> > plate_object;
     for (size_t i = 0; i < old_plate_list.get_plate_count(); ++i) {
         PartPlate* plate = old_plate_list.get_plate(i);
         std::vector<int> obj_idxs;
@@ -17979,7 +17979,7 @@ bool Plater::load_files(const wxArrayString& filenames)
 
     // Orca: Iters through given paths and imports files from zip then remove zip from paths
     // returns true if zip files were found
-    auto handle_zips = [this](vector<fs::path>& paths) { // NOLINT(*-no-recursion) - Recursion is intended and should be managed properly
+    auto handle_zips = [this](std::vector<fs::path>& paths) { // NOLINT(*-no-recursion) - Recursion is intended and should be managed properly
         bool res = false;
         for (auto it = paths.begin(); it != paths.end();) {
             if (boost::algorithm::iends_with(it->string(), ".zip")) {

src/slic3r/GUI/Preferences.cpp

@@ -378,7 +378,7 @@ wxBoxSizer *PreferencesDialog::create_item_combobox(wxString title, wxString too
 
     auto current_setting = app_config->get(param);
     if (!current_setting.empty()) {
-        auto compare  = [current_setting](string possible_setting) { return current_setting == possible_setting; };
+        auto compare  = [current_setting](std::string possible_setting) { return current_setting == possible_setting; };
         auto iterator = find_if(config_name_index.begin(), config_name_index.end(), compare);
         if (iterator != config_name_index.end())
             current_index = static_cast<unsigned int>(iterator - config_name_index.begin());
@@ -1714,7 +1714,7 @@ void PreferencesDialog::create_items()
     g_sizer->Add(create_item_title(_L("Project")), 1, wxEXPAND);
 
     std::vector<wxString> projectLoadSettingsBehaviourOptions = {_L("Load All"), _L("Ask When Relevant"), _L("Always Ask"), _L("Load Geometry Only")};
-    std::vector<string>   projectLoadSettingsConfigOptions    = { OPTION_PROJECT_LOAD_BEHAVIOUR_LOAD_ALL, OPTION_PROJECT_LOAD_BEHAVIOUR_ASK_WHEN_RELEVANT, OPTION_PROJECT_LOAD_BEHAVIOUR_ALWAYS_ASK, OPTION_PROJECT_LOAD_BEHAVIOUR_LOAD_GEOMETRY };
+    std::vector<std::string> projectLoadSettingsConfigOptions    = { OPTION_PROJECT_LOAD_BEHAVIOUR_LOAD_ALL, OPTION_PROJECT_LOAD_BEHAVIOUR_ASK_WHEN_RELEVANT, OPTION_PROJECT_LOAD_BEHAVIOUR_ALWAYS_ASK, OPTION_PROJECT_LOAD_BEHAVIOUR_LOAD_GEOMETRY };
     auto item_project_load     = create_item_combobox(_L("Load behavior"), _L("Should printer/filament/process settings be loaded when opening a 3MF file?"), SETTING_PROJECT_LOAD_BEHAVIOUR, projectLoadSettingsBehaviourOptions, projectLoadSettingsConfigOptions);
     g_sizer->Add(item_project_load);
 

src/slic3r/GUI/Project.cpp

@@ -238,7 +238,7 @@ void ProjectPanel::on_reload(wxCommandEvent& evt)
         }
 
         bool has_content = false;
-        for (const string& v : {
+        for (const std::string& v : {
                  update_type,
                  license,
                  model_name,

src/slic3r/GUI/ReleaseNote.cpp

@@ -1816,7 +1816,10 @@ void InputIpAddressDialog::set_machine_obj(MachineObject* obj)
     m_input_printer_name->GetTextCtrl()->SetLabelText(m_obj->get_dev_name());
 
     std::string img_str = DevPrinterConfigUtil::get_printer_connect_help_img(m_obj->printer_type);
-    auto diagram_bmp = create_scaled_bitmap(img_str + "_en", this, 198);
+    if (img_str.empty()) { img_str = "input_access_code_x1"; }
+
+    std::string language = wxGetApp().app_config->get("language");
+    auto diagram_bmp = create_scaled_bitmap(img_str + (language == "zh_CN" ? "_cn" : "_en"), this, 198);
     m_img_help->SetBitmap(diagram_bmp);
 
 

src/slic3r/GUI/SelectMachine.cpp

@@ -180,7 +180,7 @@ std::string get_nozzle_volume_type_cloud_string(NozzleVolumeType nozzle_volume_t
 static int s_nozzle_mapping_last_request_time = 0;
 
 std::vector<wxString> SelectMachineDialog::MACHINE_BED_TYPE_STRING;
-std::vector<string> SelectMachineDialog::MachineBedTypeString;
+std::vector<std::string> SelectMachineDialog::MachineBedTypeString;
 void                SelectMachineDialog::init_machine_bed_types()
 {
     if (MACHINE_BED_TYPE_STRING.size() == 0) {
@@ -2746,8 +2746,8 @@ void SelectMachineDialog::on_ok_btn(wxCommandEvent &event)
     std::vector<ConfirmBeforeSendInfo> confirm_text;
 
     // check more than one using in same external spool
-    std::unordered_set<string> main_external_spool_filas;
+    std::unordered_set<std::string> main_external_spool_filas;
-    std::unordered_set<string> deputy_external_spool_filas;
+    std::unordered_set<std::string> deputy_external_spool_filas;
     for (const auto& mapping_info : m_ams_mapping_result) {
         if (mapping_info.ams_id == VIRTUAL_AMS_MAIN_ID_STR){
             main_external_spool_filas.insert(mapping_info.filament_id);
@@ -5237,7 +5237,7 @@ void SelectMachineDialog::update_show_status(MachineObject* obj_)
 
     /*Check high temperture slicing*/
     if (m_print_type == PrintFromType::FROM_NORMAL) {
-        std::set<string>  high_temp_filaments;
+        std::set<std::string> high_temp_filaments;
         std::unordered_set<int> known_fila_soften_extruders;
         std::unordered_set<int> unknown_fila_soften_extruders;
         auto preset_full_config = wxGetApp().preset_bundle->full_config();

src/slic3r/GUI/SelectMachine.hpp

@@ -337,7 +337,7 @@ private:
     wxColour                            m_colour_bold_color{wxColour(38, 46, 48)};
     StateColor                          m_btn_bg_enable;
 
-    std::unordered_map<string, PrintOption*> m_checkbox_list;
+    std::unordered_map<std::string, PrintOption*> m_checkbox_list;
     std::list<PrintOption*>                  m_checkbox_list_order;
 
     std::shared_ptr<int>                m_token = std::make_shared<int>(0);

src/slic3r/GUI/SendToPrinter.cpp

@@ -126,7 +126,7 @@ void SendToPrinterDialog::stripWhiteSpace(std::string& str)
 {
     if (str == "") { return; }
 
-    string::iterator cur_it;
+    std::string::iterator cur_it;
     cur_it = str.begin();
 
     while (cur_it != str.end()) {

src/slic3r/GUI/StatusPanel.hpp

@@ -171,7 +171,7 @@ public:
     std::string current_nozzle_loc = "";
     wxColour m_colour;
 
-    string m_file_name;
+    std::string m_file_name;
     bool   m_ams_loading{false};
     void   doRender(wxDC &dc);
     ExtruderImage(wxWindow *parent, wxWindowID id, int nozzle_num, const wxPoint &pos = wxDefaultPosition, const wxSize &size = wxDefaultSize);
@@ -244,7 +244,7 @@ protected:
     {
         wxString          local_image_url; //local image path
         std::string       img_url_paths; // oss url path
-        vector<wxPanel *> image_broad;
+        std::vector<wxPanel *> image_broad;
         bool              is_selected;
         bool              is_uploaded; // load
         wxBoxSizer *      image_tb_broad = nullptr;

src/slic3r/GUI/SyncAmsInfoDialog.cpp

@@ -1578,7 +1578,7 @@ bool SyncAmsInfoDialog::is_nozzle_type_match(DevExtderSystem data, wxString &err
         }
     }
 
-    vector<int> map_extruders = {1, 0};
+    std::vector<int> map_extruders = {1, 0};
 
     // The default two extruders are left, right, but the order of the extruders on the machine is right, left.
     std::vector<std::string> flow_type_of_machine;
@@ -1678,7 +1678,7 @@ void SyncAmsInfoDialog::stripWhiteSpace(std::string &str)
 {
     if (str == "") { return; }
 
-    string::iterator cur_it;
+    std::string::iterator cur_it;
     cur_it = str.begin();
 
     while (cur_it != str.end()) {

src/slic3r/GUI/Tab.cpp

@@ -2257,7 +2257,7 @@ void Tab::on_value_change(const std::string& opt_key, const boost::any& value)
             wxGetApp().plater()->update();
     }
 
-    string opt_key_without_idx = opt_key.substr(0, opt_key.find('#'));
+    std::string opt_key_without_idx = opt_key.substr(0, opt_key.find('#'));
 
     if (opt_key_without_idx == "long_retractions_when_cut") {
         unsigned char activate = boost::any_cast<unsigned char>(value);
@@ -2928,7 +2928,7 @@ void TabPrint::build()
         optgroup->append_single_option_line("skin_infill_line_width", "strength_settings_patterns#locked-zag");
         optgroup->append_single_option_line("skeleton_infill_line_width", "strength_settings_patterns#locked-zag");
         optgroup->append_single_option_line("symmetric_infill_y_axis", "strength_settings_infill#symmetric-infill-y-axis");
-        optgroup->append_single_option_line("infill_complete_top", "strength_settings_infill#infill-complete-top");
+        optgroup->append_single_option_line("infill_complete_top", "strength_settings_patterns#fill-pattern-tops");
         optgroup->append_single_option_line("infill_shift_step", "strength_settings_patterns#cross-hatch");
         optgroup->append_single_option_line("lateral_lattice_angle_1", "strength_settings_patterns#lateral-lattice");
         optgroup->append_single_option_line("lateral_lattice_angle_2", "strength_settings_patterns#lateral-lattice");

src/slic3r/GUI/WebGuideDialog.cpp

@@ -1685,13 +1685,13 @@ int GuideFrame::SaveProfileData()
     return 0;
 }
 
-void StringReplace(string &strBase, string strSrc, string strDes)
+void StringReplace(std::string &strBase, std::string strSrc, std::string strDes)
 {
-    string::size_type pos    = 0;
+    std::string::size_type pos    = 0;
-    string::size_type srcLen = strSrc.size();
+    std::string::size_type srcLen = strSrc.size();
-    string::size_type desLen = strDes.size();
+    std::string::size_type desLen = strDes.size();
     pos                      = strBase.find(strSrc, pos);
-    while ((pos != string::npos)) {
+    while ((pos != std::string::npos)) {
         strBase.replace(pos, srcLen, strDes);
         pos = strBase.find(strSrc, (pos + desLen));
     }

src/slic3r/GUI/Widgets/AMSControl.cpp

@@ -1052,7 +1052,7 @@ void AMSControl::UpdateAms(const std::string   &series_name,
     /*update humidity popup*/
     if (m_percent_humidity_dry_popup->IsShown())
     {
-        string target_id = m_percent_humidity_dry_popup->get_owner_ams_id();
+        std::string target_id = m_percent_humidity_dry_popup->get_owner_ams_id();
         for (const auto& the_info : ams_info)
         {
             if (target_id == the_info.ams_id)

src/slic3r/GUI/Widgets/AMSControl.hpp

@@ -63,7 +63,7 @@ protected:
 
     std::string                      m_dev_id;
     std::vector<std::vector<std::string>> m_item_ids{ {}, {} };
-    std::vector<std::pair<string, string>> pair_id;
+    std::vector<std::pair<std::string, std::string>> pair_id;
 
     int         m_total_ext_count = 1;
     AMSextruder *m_extruder{nullptr};
@@ -181,7 +181,7 @@ public:
     std::tuple<bool, bool> isFilaSwitchReady();
     void show_switcher_status(bool show);
 
-    void UpdatePassRoad(string ams_id, AMSPassRoadType type, AMSPassRoadSTEP step);
+    void UpdatePassRoad(std::string ams_id, AMSPassRoadType type, AMSPassRoadSTEP step);
     void CreateAms();
     void CreateAmsDoubleNozzle(const std::string &series_name, const std::string& printer_type);
     void CreateAmsSingleNozzle(const std::string &series_name, const std::string &printer_type);

src/slic3r/GUI/Widgets/AMSItem.cpp

@@ -634,7 +634,7 @@ void AMSextruderImage::doRender(wxDC &dc)
 }
 
 
-AMSextruderImage::AMSextruderImage(wxWindow *parent, wxWindowID id, string file_name, const wxSize& size, const wxPoint &pos)
+AMSextruderImage::AMSextruderImage(wxWindow *parent, wxWindowID id, std::string file_name, const wxSize& size, const wxPoint &pos)
 {
     wxWindow::Create(parent, id, pos, size);
     SetBackgroundColour(StateColor::darkModeColorFor(*wxWHITE));
@@ -823,7 +823,7 @@ void SwitcherImage::doRender(wxDC &dc)
     Layout();
 }
 
-SwitcherImage::SwitcherImage(wxWindow *parent, wxWindowID id, string file_name, const wxSize& size, const wxPoint &pos)
+SwitcherImage::SwitcherImage(wxWindow *parent, wxWindowID id, std::string file_name, const wxSize& size, const wxPoint &pos)
 {
     wxWindow::Create(parent, id, pos, size);
     SetBackgroundColour(StateColor::darkModeColorFor(*wxWHITE));
@@ -899,7 +899,7 @@ void AMSextruder::OnAmsLoading(bool load, int nozzle_id, wxColour col /*= AMS_CO
 }
 
 /*return true if something is updated*/
-bool AMSextruder::updateNozzleNum(int nozzle_num, const string& series_name)
+bool AMSextruder::updateNozzleNum(int nozzle_num, const std::string& series_name)
 {
     if (m_nozzle_num == nozzle_num && m_series_name == series_name) return false;
     m_series_name = series_name;

src/slic3r/GUI/Widgets/AMSItem.hpp

@@ -393,10 +393,10 @@ public:
     bool            m_show_state = {false};
     wxColour        m_colour;
     ScalableBitmap  m_ams_extruder;
-    string m_file_name;
+    std::string m_file_name;
     bool            m_ams_loading{ false };
     void            doRender(wxDC &dc);
-    AMSextruderImage(wxWindow *parent, wxWindowID id, string file_name, const wxSize& size, const wxPoint &pos = wxDefaultPosition);
+    AMSextruderImage(wxWindow *parent, wxWindowID id, std::string file_name, const wxSize& size, const wxPoint &pos = wxDefaultPosition);
     ~AMSextruderImage();
 };
 
@@ -444,10 +444,10 @@ public:
     bool            m_show_state = {false};
     wxColour        m_colour;
     ScalableBitmap  m_switcher;
-    string m_file_name;
+    std::string m_file_name;
     // bool            m_ams_loading{ false };
     void            doRender(wxDC &dc);
-    SwitcherImage(wxWindow *parent, wxWindowID id, string file_name, const wxSize& size, const wxPoint &pos = wxDefaultPosition);
+    SwitcherImage(wxWindow *parent, wxWindowID id, std::string file_name, const wxSize& size, const wxPoint &pos = wxDefaultPosition);
     ~SwitcherImage();
 };
 
@@ -456,7 +456,7 @@ class AMSextruder : public wxWindow
 {
 private:
     int    m_nozzle_num = -1;
-    string m_series_name;
+    std::string m_series_name;
 
 public:
     void TurnOn(wxColour col);
@@ -466,7 +466,7 @@ public:
     void msw_rescale();
     void has_ams(bool hams) {m_has_vams = hams; Refresh();};
     void no_ams_mode(bool mode) {m_none_ams_mode = mode; Refresh();};
-    bool updateNozzleNum(int nozzle_num, const std::string& series_name = string());
+    bool updateNozzleNum(int nozzle_num, const std::string& series_name = std::string());
 
     bool            m_none_ams_mode{true};
     bool            m_has_vams{false};

src/slic3r/GUI/wxExtensions.cpp

@@ -453,9 +453,16 @@ wxBitmap create_scaled_bitmap(  const std::string& bmp_name_in,
                                 const bool menu_bitmap/* = false*/,
                                 const bool resize/* = false*/,
                                 const bool bitmap2/* = false*/,
-                                const vector<std::string>& array_new_color/* = vector<std::string>*/)//used for semi transparent material)
+                                const std::vector<std::string>& array_new_color/* = vector<std::string>*/)//used for semi transparent material)
 {
     static Slic3r::GUI::BitmapCache cache;
+
+    // An empty name means the caller's icon lookup failed
+    if (bmp_name_in.empty() || bmp_name_in == ".png") {
+        BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << ": empty bitmap name";
+        return wxNullBitmap;
+    }
+
     if (bitmap2) {
         return create_scaled_bitmap2(bmp_name_in, cache, win, px_cnt, grayscale, resize, array_new_color);
     }
@@ -494,7 +501,7 @@ wxBitmap create_scaled_bitmap(  const std::string& bmp_name_in,
 
 wxBitmap create_scaled_bitmap2(const std::string& bmp_name_in, Slic3r::GUI::BitmapCache& cache, wxWindow* win/* = nullptr*/ ,
     const int px_cnt/* = 16*/, const bool grayscale/* = false*/ , const bool resize/* = false*/ ,
-    const vector<std::string>& array_new_color/* = vector<std::string>()*/) // color witch will used instead of orange
+    const std::vector<std::string>& array_new_color/* = vector<std::string>()*/) // color witch will used instead of orange
 {
     unsigned int width = 0;
     // win may be nullptr; see create_scaled_bitmap() above.

src/slic3r/Utils/BBLPrinterAgent.cpp

@@ -204,9 +204,8 @@ int BBLPrinterAgent::command_axis_control(std::string dev_id, std::string axis,
         int dir = input_val > 0 ? 1 : -1;
         // i3-arch printers move the bed for Y/Z, so the on-screen direction is
         // reversed -- same negation the g-code fallback below applies.
-        if (!is_core_xy && (axis == "Y" || axis == "Z")) {
+        if (!is_core_xy && (axis == "Y" || axis == "Z"))
             dir = -dir;
-        }
 
         j["print"]["command"] = "xyz_ctrl";
         j["print"]["axis"] = axis;
@@ -216,9 +215,8 @@ int BBLPrinterAgent::command_axis_control(std::string dev_id, std::string axis,
     }
 
     double value = input_val;
-    if (!is_core_xy && (axis == "Y" || axis == "Z")) {
+    if (!is_core_xy && (axis == "Y" || axis == "Z"))
-        value = -1.0 * input_val;
+        value = -input_val;
-    }
 
     std::string value_str = (boost::format("%.1f") % (value * unit)).str();
     std::string gcode;
@@ -239,11 +237,10 @@ int BBLPrinterAgent::command_axis_control(std::string dev_id, std::string axis,
 int BBLPrinterAgent::publish(const std::string& dev_id, const nlohmann::json& j, bool lan_mode)
 {
     const int rtn = lan_mode ? send_message_to_printer(dev_id, j.dump(), 0, 0) : send_message(dev_id, j.dump(), 0, 0);
-    if (rtn == 0) {
+    if (rtn == 0)
         BOOST_LOG_TRIVIAL(info) << "publish_json: " << j.dump() << " code: " << rtn;
-    } else {
+    else
         BOOST_LOG_TRIVIAL(error) << "publish_json: " << j.dump() << " code: " << rtn;
-    }
     return rtn;
 }
 
@@ -589,15 +586,8 @@ int BBLPrinterAgent::start_local_print_with_record(PrintParams params, OnUpdateS
 
 int BBLPrinterAgent::start_send_gcode_to_sdcard(PrintParams params, OnUpdateStatusFn update_fn, WasCancelledFn cancel_fn, OnWaitFn wait_fn)
 {
-    int result = dispatch_start<func_start_send_gcode_to_sdcard_legacy, func_start_send_gcode_to_sdcard_0203>(
+    return dispatch_start<func_start_send_gcode_to_sdcard_legacy, func_start_send_gcode_to_sdcard_0203>(
         BBLNetworkPlugin::instance().get_start_send_gcode_to_sdcard(), params, update_fn, cancel_fn, wait_fn);
-    if (result != 0) {
-        BOOST_LOG_TRIVIAL(error) << "start_send_gcode_to_sdcard failed: result=" << result
-            << ", try_emmc_print=" << params.try_emmc_print
-            << ", legacy_mode=" << BBLNetworkPlugin::instance().use_legacy_network()
-            << ", dev_ip=" << params.dev_ip << ", dev_id=" << params.dev_id;
-    }
-    return result;
 }
 
 int BBLPrinterAgent::start_local_print(PrintParams params, OnUpdateStatusFn update_fn, WasCancelledFn cancel_fn)

src/slic3r/Utils/BBLPrinterAgent.hpp

@@ -110,7 +110,6 @@ public:
     static std::string from_orca_payload(std::string json_text);
 
 private:
-    // why: the lan/cloud DECISION stays machine-side; keep this mechanical branch in sync with publish_json.
     int publish(const std::string& dev_id, const nlohmann::json& j, bool lan_mode);
 };
 

src/slic3r/Utils/CrealityPrintAgent.cpp

@@ -289,11 +289,8 @@ bool CrealityPrintAgent::parse_cfs_response(const std::string&    response,
     return true;
 }
 
-bool CrealityPrintAgent::fetch_filament_info(std::string dev_id, FilamentSyncMode sync_mode)
+bool CrealityPrintAgent::fetch_filament_info(std::string dev_id, FilamentSyncMode /*sync_mode*/)
 {
-    if (sync_mode != get_filament_sync_mode())
-        return false;
-
     if (device_info.dev_ip.empty()) {
         BOOST_LOG_TRIVIAL(warning)
             << "CrealityPrintAgent::fetch_filament_info: no device IP, falling back to base agent";

src/slic3r/Utils/CrealityPrintAgent.hpp

@@ -37,7 +37,7 @@ public:
     };
 
     explicit CrealityPrintAgent(std::string log_dir);
-    ~CrealityPrintAgent() override { shutdown(); }
+    ~CrealityPrintAgent() override = default;
 
     static AgentInfo get_agent_info_static();
     AgentInfo        get_agent_info() override { return get_agent_info_static(); }

src/slic3r/Utils/MoonrakerPrinterAgent.hpp

@@ -12,10 +12,6 @@
 #include <set>
 #include <string>
 #include <thread>
-#include <chrono>
-#include <condition_variable>
-#include <deque>
-#include <functional>
 
 #include <nlohmann/json.hpp>
 #include <vector>
@@ -24,39 +20,6 @@ namespace Slic3r { class ICloudServiceAgent; }
 
 namespace Slic3r {
 
-class Http;
-
-bool moonraker_is_light_name(const std::string& name);
-
-class MoonrakerWebsocket
-{
-public:
-    enum class ReadResult
-    {
-        message,
-        timeout,
-        closed,
-        error,
-    };
-
-    MoonrakerWebsocket(bool secure, std::string api_key, std::string ca_file);
-    ~MoonrakerWebsocket();
-
-    void connect(const std::string& host, const std::string& port, std::chrono::seconds timeout);
-    void tls_handshake(const std::string& host);
-    void handshake(const std::string& host, const std::string& target);
-    void text(bool enabled);
-    void write(const std::string& body);
-    ReadResult read(std::string& payload, std::string& error_message);
-    void close();
-    void expires_after(std::chrono::seconds timeout);
-    void abort();
-
-private:
-    struct Impl;
-    std::unique_ptr<Impl> m_impl;
-};
-
 class MoonrakerPrinterAgent : public IPrinterAgent
 {
 public:
@@ -102,20 +65,12 @@ public:
     int set_on_local_connect_fn(OnLocalConnectedFn fn) override;
     int set_on_local_message_fn(OnMessageFn fn) override;
     int set_queue_on_main_fn(QueueOnMainFn fn) override;
+
+    // Pull-mode agent (on-demand filament sync)
+    FilamentSyncMode get_filament_sync_mode() const override { return FilamentSyncMode::pull; }
     bool fetch_filament_info(std::string dev_id, FilamentSyncMode sync_mode = FilamentSyncMode::pull) override;
-    CameraStreamMode get_camera_stream_mode() const override;
-    std::string get_camera_url() const override;
 
 protected:
-    struct ConnectionSettings
-    {
-        std::string dev_id;
-        std::string base_url;
-        std::string api_key;
-        bool        use_ssl = false;
-        std::string ca_file;
-    };
-
     struct MoonrakerDeviceInfo
     {
         std::string dev_id;
@@ -127,9 +82,7 @@ protected:
         std::string dev_name;
         std::string version;
         std::string klippy_state;
-        float       nozzle_diameter = 0.0f;
         bool        use_ssl = false;
-        std::string ca_file;
     } device_info;
 
     // Tray data for AMS payload building
@@ -147,25 +100,12 @@ protected:
     void build_ams_payload(int ams_count, int max_lane_index, const std::vector<AmsTrayData>& trays);
 
     // Methods that derived classes may need to override or access
-    virtual bool init_device_info(const PrinterConnectionParams& params);
+    virtual bool init_device_info(const std::string& dev_id, const std::string& dev_ip, const std::string& username, const std::string& password, bool use_ssl, const std::string& port);
-    virtual bool fetch_device_info(const ConnectionSettings& connection, MoonrakerDeviceInfo& info, std::string& error) const;
+    virtual bool fetch_device_info(const std::string& base_url, const std::string& api_key, MoonrakerDeviceInfo& info, std::string& error) const;
-    ConnectionSettings get_connection_settings() const;
-    void configure_http(Http& http, const ConnectionSettings& connection) const;
-    static float parse_nozzle_diameter(const nlohmann::json& response);
 
     // State access for derived classes
     mutable std::recursive_mutex       state_mutex;
 
-    // Detached fetch threads hold a raw `this`; shutdown() waits for this to reach 0.
-    std::atomic<int> filament_fetch_in_flight{0};
-
-    // Idempotent teardown; must be called from the most-derived destructor.
-    void shutdown();
-    std::atomic<bool> shutting_down{false};
-
-    // Serializes the shutting_down check with the in-flight reservation.
-    std::mutex fetch_lifecycle_mutex;
-
     // Helpers
     bool        is_numeric(const std::string& value);
     std::string normalize_base_url(bool use_ssl, const std::string& host, const std::string& port);
@@ -178,30 +118,13 @@ protected:
     // Map filament type to OrcaFilamentLibrary preset ID for AMS sync compatibility
     static std::string map_filament_type_to_generic_id(const std::string& filament_type);
 
-    // Send a G-code script via Moonraker (/printer/gcode/script)
-    bool send_gcode(const std::string& dev_id, const std::string& gcode) const;
-    bool send_gcode(const std::string& dev_id, const std::string& gcode,
-                    const ConnectionSettings& connection) const;
-    bool post_print_action(const std::string& action) const;
-    bool post_print_action(const std::string& action,
-                           const ConnectionSettings& connection) const;
-
-    bool send_ws_rpc(const std::string& method, const nlohmann::json& params);
-
-    virtual void on_status_loop_tick(const std::string& dev_id) {}
-
-    // Queue work that may use agent state. The command worker is joined during
-    // destruction, so queued commands cannot outlive the agent.
-    void enqueue_command(std::function<void()> fn);
-    mutable std::recursive_mutex connect_mutex;
-
 private:
     int handle_request(const std::string& dev_id, const std::string& json_str);
     int send_version_info(const std::string& dev_id);
     int send_access_code(const std::string& dev_id);
 
-    bool fetch_object_list(const ConnectionSettings& connection, std::set<std::string>& objects, std::string& error) const;
+    bool fetch_object_list(const std::string& base_url, const std::string& api_key, std::set<std::string>& objects, std::string& error) const;
-    bool query_printer_status(const ConnectionSettings& connection, nlohmann::json& status, std::string& error) const;
+    bool query_printer_status(const std::string& base_url, const std::string& api_key, nlohmann::json& status, std::string& error) const;
     bool send_gcode_sync(const std::string& dev_id, const std::string& gcode) const;
     void send_gcode_async(const std::string& dev_id, const std::string& gcode,
                           std::function<void(bool)> on_result = {}) const;
@@ -210,11 +133,10 @@ private:
     void dispatch_local_connect(int state, const std::string& dev_id, const std::string& msg);
     void dispatch_printer_connected(const std::string& dev_id);
     void dispatch_message(const std::string& dev_id, const std::string& payload);
-    void start_status_stream(const std::string& dev_id, ConnectionSettings connection);
+    void start_status_stream(const std::string& dev_id, const std::string& base_url, const std::string& api_key);
     void stop_status_stream();
-    void run_status_stream(std::string dev_id, ConnectionSettings connection);
+    void run_status_stream(std::string dev_id, std::string base_url, std::string api_key);
-    void handle_ws_message(std::string dev_id, std::string payload, ConnectionSettings connection);
+    void handle_ws_message(const std::string& dev_id, const std::string& payload);
-    void refresh_thumbnail_url(const ConnectionSettings& connection);
     void update_status_cache(const nlohmann::json& updates);
     nlohmann::json build_print_payload_locked() const;
 
@@ -225,28 +147,22 @@ private:
 
     // File upload
     bool upload_gcode(const std::string& local_path, const std::string& filename,
-                      const ConnectionSettings& connection,
+                      const std::string& base_url, const std::string& api_key,
                       OnUpdateStatusFn update_fn, WasCancelledFn cancel_fn);
 
-    // Start a print of a previously uploaded G-code file (path relative to the
+    // JSON-RPC helper
-    // Moonraker gcodes root).
+    bool send_jsonrpc_command(const std::string& base_url, const std::string& api_key,
-    bool start_print_file(const ConnectionSettings& connection,
+                              const nlohmann::json& request, std::string& response) const;
-                          const std::string& filename, std::string& error_msg) const;
 
     // Connection thread management
     void perform_connection_async(const std::string& dev_id,
-                                   ConnectionSettings connection,
+                                   const std::string& base_url,
+                                   const std::string& api_key,
                                    uint64_t generation);
 
-    // why: a printer with no /server/webcams/list entry can still name its stream directly;
-    // subclasses (e.g. printers with a fixed webcam path) can override this instead.
-    virtual std::string webcam_stream_override(const std::string& base_url) const { return {}; }
-    void refresh_webcam_info() const;
-    bool fetch_webcam_info(const ConnectionSettings& connection, uint64_t generation) const;
-
     // System-specific filament fetch methods
-    bool fetch_hh_filament_info(const ConnectionSettings& connection, std::vector<AmsTrayData>& trays, int& max_lane_index);
+    bool fetch_hh_filament_info(std::vector<AmsTrayData>& trays, int& max_lane_index);
-    bool fetch_moonraker_filament_data(const ConnectionSettings& connection, std::vector<AmsTrayData>& trays, int& max_lane_index);
+    bool fetch_moonraker_filament_data(std::vector<AmsTrayData>& trays, int& max_lane_index);
 
     // JSON helper methods
     static std::string safe_json_string(const nlohmann::json& obj, const char* key);
@@ -272,38 +188,15 @@ private:
 
     mutable std::recursive_mutex payload_mutex;
     nlohmann::json     status_cache;
-    // note: guarded by payload_mutex; filled by refresh_thumbnail_url(), empty url = looked up, none found
-    std::string        thumbnail_filename;
-    std::string        thumbnail_url;
-    mutable std::string        webcam_stream_url;
-    mutable CameraStreamMode   webcam_stream_mode = CameraStreamMode::none;
-    mutable uint64_t            webcam_info_last_lookup_ms = 0;
-    mutable uint64_t            webcam_info_generation = 0;
-    unsigned            thumbnail_lookup_attempts = 0;
-
-    static constexpr uint64_t WEBCAM_INFO_REFRESH_INTERVAL_MS = 1000;
 
     std::atomic<int>       next_jsonrpc_id{1};
     std::set<std::string>  available_objects;  // Track for feature detection
-    bool                   assumed_light_on = false;
 
     std::atomic<bool>   ws_stop{false};
     std::atomic<bool>   ws_reconnect_requested{false};  // Flag to trigger reconnection
     std::atomic<uint64_t> ws_last_emit_ms{0};
     std::thread         ws_thread;
 
-    // stop_status_stream() invokes ws_abort_io to wake a blocked synchronous
-    // ws.read()/ws.write()/handshake in run_status_stream(): ws_stop is only
-    // observed between reads, and Beast's expires_after() does not bound
-    // synchronous operations.
-    std::mutex             ws_abort_mutex;
-    std::function<void()>  ws_abort_io;  // guarded by ws_abort_mutex
-
-    // AMS/filament refresh cadence, independent of telemetry dispatch so a steady
-    // stream of status updates can't starve it (ws_last_emit_ms is reset by those).
-    static constexpr uint64_t AMS_REFRESH_INTERVAL_MS = 10000;
-    std::atomic<uint64_t> ams_last_fetch_ms{0};
-
     // Throttling configuration for WebSocket updates
     // Critical changes (state transitions) dispatch immediately; telemetry is throttled
     static constexpr uint64_t STATUS_UPDATE_INTERVAL_MS = 1000;  // 1 update/sec for telemetry
@@ -313,13 +206,7 @@ private:
     // Connection thread management
     std::atomic<uint64_t>  connect_generation{0};
     std::thread            connect_thread;
-
+    std::recursive_mutex   connect_mutex;
-    void run_command_worker();
-    std::thread cmd_thread;
-    std::deque<std::function<void()>> cmd_queue;
-    std::mutex cmd_mutex;
-    std::condition_variable cmd_cv;
-    bool cmd_stop = false;
 };
 
 } // namespace Slic3r

src/slic3r/Utils/QidiPrinterAgent.cpp

@@ -2,23 +2,18 @@
 #include "Http.hpp"
 #include "MoonrakerPrinterAgent.hpp"
 #include "IPrinterAgent.hpp"
-#include "bambu_networking.hpp"
 #include "libslic3r/PresetBundle.hpp"
 #include "slic3r/GUI/GUI_App.hpp"
 
 #include "nlohmann/json.hpp"
-#include <atomic>
 #include <boost/algorithm/string.hpp>
 #include <boost/algorithm/string/trim.hpp>
 #include <boost/algorithm/string/case_conv.hpp>
 #include <boost/log/trivial.hpp>
 #include <cctype>
 #include "libslic3r/Preset.hpp"
-#include <cstddef>
 #include <map>
-#include <mutex>
 #include <sstream>
-#include <thread>
 #include <string>
 #include <utility>
 #include <vector>
@@ -41,18 +36,6 @@ bool has_visible_base_preset(const PresetCollection& filaments, const std::strin
     return false;
 }
 
-// RAII decrement for the in-flight fetch count; movable so a failed thread start still releases it.
-struct InFlightGuard
-{
-    std::atomic<int>* counter;
-    explicit InFlightGuard(std::atomic<int>& c) noexcept : counter(&c) {}
-    InFlightGuard(InFlightGuard&& other) noexcept : counter(other.counter) { other.counter = nullptr; }
-    InFlightGuard(const InFlightGuard&) = delete;
-    InFlightGuard& operator=(const InFlightGuard&) = delete;
-    InFlightGuard& operator=(InFlightGuard&&) = delete;
-    ~InFlightGuard() { if (counter) counter->fetch_sub(1, std::memory_order_relaxed); }
-};
-
 } // anonymous namespace
 
 const std::string QidiPrinterAgent_VERSION = "0.0.1";
@@ -66,156 +49,51 @@ AgentInfo QidiPrinterAgent::get_agent_info_static()
     return AgentInfo{"qidi", "Qidi", QidiPrinterAgent_VERSION, "Qidi printer agent"};
 }
 
-FilamentSyncMode QidiPrinterAgent::get_filament_sync_mode() const
+bool QidiPrinterAgent::fetch_filament_info(std::string dev_id, FilamentSyncMode /*sync_mode*/)
 {
-    if (GUI::wxGetApp().app_config->get_bool("use_printer_agents"))
+    std::string error;
-        return FilamentSyncMode::subscription;
-    return FilamentSyncMode::pull;
-}
 
-bool QidiPrinterAgent::fetch_filament_info(std::string dev_id, FilamentSyncMode sync_mode)
+    // 1. Fetch device info and infer series_id
-{
+    std::string series_id;
-    if (sync_mode != get_filament_sync_mode())
+    {
+        MoonrakerDeviceInfo info;
+        if (fetch_device_info(device_info.base_url, device_info.api_key, info, error)) {
+            series_id = infer_series_id(info.model_id, info.dev_name);
+        }
+    }
+    if (series_id.empty()) {
+        // Fall back to the configured Orca model if Moonraker doesn't expose a usable identifier.
+        series_id = infer_series_id(device_info.model_id, device_info.model_name);
+    }
+
+    // 2. Fetch filament dictionary
+    QidiFilamentDict dict;
+    if (!fetch_filament_dict(device_info.base_url, device_info.api_key, dict, error)) {
+        BOOST_LOG_TRIVIAL(warning) << "QidiPrinterAgent::fetch_filament_info: Failed to fetch filament dict: " << error;
+    }
+
+    // 3. Fetch slot info and build AmsTrayData directly
+    std::vector<AmsTrayData> trays;
+    int                      box_count = 0;
+    if (!fetch_slot_info(device_info.base_url, device_info.api_key, dict, series_id, trays, box_count, error)) {
+        BOOST_LOG_TRIVIAL(warning) << "QidiPrinterAgent::fetch_filament_info: Failed to fetch slot info: " << error;
         return false;
-
-    // Snapshot what the fetch needs; a reconnect can rewrite device_info meanwhile.
-    ConnectionSettings connection = get_connection_settings();
-    std::string        model_id;
-    std::string        model_name;
-    {
-        std::lock_guard<std::recursive_mutex> lock(connect_mutex);
-        model_id   = device_info.model_id;
-        model_name = device_info.model_name;
     }
 
-    // Reserve under the same mutex shutdown() uses, so the flag and the count can't race.
+    // 4. Build the AMS payload
-    {
+    build_ams_payload(box_count, box_count * 4 - 1, trays);
-        std::lock_guard<std::mutex> lock(fetch_lifecycle_mutex);
-        if (shutting_down.load())
-            return false;
-        filament_fetch_in_flight.fetch_add(1, std::memory_order_relaxed);
-    }
-
-    InFlightGuard guard{filament_fetch_in_flight};
-    std::thread([this, guard = std::move(guard), connection = std::move(connection), model_id, model_name]() mutable {
-        std::string error;
-
-        // 1. Fetch device info and infer series_id
-        std::string series_id;
-        {
-            MoonrakerDeviceInfo info;
-            if (fetch_device_info(connection, info, error)) {
-                series_id = infer_series_id(info.model_id, info.dev_name);
-            }
-        }
-        if (series_id.empty()) {
-            // Fall back to the configured Orca model if Moonraker doesn't expose a usable identifier.
-            series_id = infer_series_id(model_id, model_name);
-        }
-
-        // 2. Fetch filament dictionary
-        QidiFilamentDict dict;
-        if (!fetch_filament_dict(connection, dict, error)) {
-            BOOST_LOG_TRIVIAL(warning) << "QidiPrinterAgent::fetch_filament_info: Failed to fetch filament dict: " << error;
-        }
-
-        // 3. Fetch slot info and build AmsTrayData directly
-        std::vector<AmsTrayData> trays;
-        int box_count = 0;
-        if (!fetch_slot_info(connection, dict, series_id, trays, box_count, error)) {
-            BOOST_LOG_TRIVIAL(warning) << "QidiPrinterAgent::fetch_filament_info: Failed to fetch slot info: " << error;
-            return;
-        }
-
-        // 4. Build the AMS payload
-        build_ams_payload(box_count, box_count * 4 - 1, trays);
-    }).detach();
     return true;
 }
 
-bool QidiPrinterAgent::apply_box_mapping(const PrintParams& params) const
+bool QidiPrinterAgent::fetch_slot_info(const std::string&        base_url,
-{
+                                       const std::string&        api_key,
-    // enable_box mirrors task_use_ams: engage the multi-color box only when this
-    // job actually routes filament through it. (See qidi-ams-findings.md §2/§8.3 —
-    // if firmware treats enable_box as "a box exists" rather than "use it this job",
-    // switch this gate to HasAms()/box_count instead.)
-    const int enable = params.task_use_ams ? 1 : 0;
-    if (!send_gcode(device_info.dev_id, "SAVE_VARIABLE VARIABLE=enable_box VALUE=" + std::to_string(enable))) {
-        BOOST_LOG_TRIVIAL(error) << "QidiPrinterAgent::apply_box_mapping: failed to set enable_box";
-        return false;
-    }
-
-    // When the box isn't used this job, leave the existing value_t<tool> slot
-    // assignments untouched (enable_box=0 is enough to disengage it).
-    if (!enable)
-        return true;
-
-    if (params.ams_mapping.empty()) {
-        BOOST_LOG_TRIVIAL(warning) << "QidiPrinterAgent::apply_box_mapping: enable_box set but ams_mapping is empty";
-        return true;
-    }
-
-    // ams_mapping (v0) is a JSON array indexed by filament/tool; each value is the
-    // physical box slot (-1 = unmapped). Mirror it onto the printer's value_t<tool>
-    // variables: SAVE_VARIABLE VARIABLE=value_t<tool> VALUE='slot<n>'.
-    auto mapping = nlohmann::json::parse(params.ams_mapping, nullptr, /*allow_exceptions*/ false);
-    if (mapping.is_discarded() || !mapping.is_array()) {
-        BOOST_LOG_TRIVIAL(error) << "QidiPrinterAgent::apply_box_mapping: invalid ams_mapping: " << params.ams_mapping;
-        return false;
-    }
-
-    for (size_t tool = 0; tool < mapping.size(); ++tool) {
-        if (!mapping[tool].is_number_integer())
-            continue;
-        const int slot = mapping[tool].get<int>();
-        if (slot < 0)
-            continue; // unmapped filament — skip
-        const std::string gcode = "SAVE_VARIABLE VARIABLE=value_t" + std::to_string(tool) +
-                                  " VALUE=\"'slot" + std::to_string(slot) + "'\"";
-        if (!send_gcode(device_info.dev_id, gcode)) {
-            BOOST_LOG_TRIVIAL(error) << "QidiPrinterAgent::apply_box_mapping: failed to set value_t" << tool;
-            return false;
-        }
-    }
-    return true;
-}
-
-int QidiPrinterAgent::start_local_print(PrintParams params, OnUpdateStatusFn update_fn, WasCancelledFn cancel_fn)
-{
-    if (!apply_box_mapping(params))
-        return BAMBU_NETWORK_ERR_PRINT_LP_PUBLISH_MSG_FAILED;
-    return MoonrakerPrinterAgent::start_local_print(std::move(params), update_fn, cancel_fn);
-}
-
-int QidiPrinterAgent::start_print(PrintParams params, OnUpdateStatusFn update_fn, WasCancelledFn cancel_fn, OnWaitFn wait_fn)
-{
-    if (!apply_box_mapping(params))
-        return BAMBU_NETWORK_ERR_PRINT_LP_PUBLISH_MSG_FAILED;
-    return MoonrakerPrinterAgent::start_print(std::move(params), update_fn, cancel_fn, wait_fn);
-}
-
-int QidiPrinterAgent::start_local_print_with_record(PrintParams params, OnUpdateStatusFn update_fn, WasCancelledFn cancel_fn, OnWaitFn wait_fn)
-{
-    if (!apply_box_mapping(params))
-        return BAMBU_NETWORK_ERR_PRINT_WR_UPLOAD_FTP_FAILED;
-    return MoonrakerPrinterAgent::start_local_print_with_record(std::move(params), update_fn, cancel_fn, wait_fn);
-}
-
-int QidiPrinterAgent::start_sdcard_print(PrintParams params, OnUpdateStatusFn update_fn, WasCancelledFn cancel_fn)
-{
-    if (!apply_box_mapping(params))
-        return BAMBU_NETWORK_ERR_PRINT_LP_PUBLISH_MSG_FAILED;
-    return MoonrakerPrinterAgent::start_sdcard_print(std::move(params), update_fn, cancel_fn);
-}
-
-bool QidiPrinterAgent::fetch_slot_info(const ConnectionSettings& connection,
                                        const QidiFilamentDict&   dict,
                                        const std::string&        series_id,
                                        std::vector<AmsTrayData>& trays,
                                        int&                      box_count,
                                        std::string&              error)
 {
-    std::string url = join_url(connection.base_url, "/printer/objects/query?save_variables=variables");
+    std::string url = join_url(base_url, "/printer/objects/query?save_variables=variables");
     for (int i = 0; i < 16; ++i) {
         url += "&box_stepper%20slot" + std::to_string(i) + "=runout_button";
     }
@@ -225,9 +103,8 @@ bool QidiPrinterAgent::fetch_slot_info(const ConnectionSettings& connection,
     std::string http_error;
 
     auto http = Http::get(url);
-    configure_http(http, connection);
+    if (!api_key.empty()) {
-    if (!connection.api_key.empty()) {
+        http.header("X-Api-Key", api_key);
-        http.header("X-Api-Key", connection.api_key);
     }
     http.timeout_connect(5)
         .timeout_max(10)
@@ -252,10 +129,20 @@ bool QidiPrinterAgent::fetch_slot_info(const ConnectionSettings& connection,
         return false;
     }
 
-    nlohmann::json status;
+    auto json = nlohmann::json::parse(response_body, nullptr, false, true);
-    nlohmann::json variables;
+    if (json.is_discarded()) {
-    if (!parse_slot_response(response_body, status, variables, error))
+        error = "Invalid JSON response";
         return false;
+    }
+
+    if (!json.contains("result") || !json["result"].contains("status") || !json["result"]["status"].contains("save_variables") ||
+        !json["result"]["status"]["save_variables"].contains("variables")) {
+        error = "Unexpected JSON structure";
+        return false;
+    }
+
+    auto& variables = json["result"]["status"]["save_variables"]["variables"];
+    auto& status    = json["result"]["status"];
 
     box_count = variables.value("box_count", 1);
     if (box_count < 0) {
@@ -330,45 +217,20 @@ bool QidiPrinterAgent::fetch_slot_info(const ConnectionSettings& connection,
     return true;
 }
 
-bool QidiPrinterAgent::parse_slot_response(const std::string& response_body,
+bool QidiPrinterAgent::fetch_filament_dict(const std::string& base_url,
-                                           nlohmann::json&    status,
+                                           const std::string& api_key,
-                                           nlohmann::json&    variables,
-                                           std::string&       error)
-{
-    auto json = nlohmann::json::parse(response_body, nullptr, false, true);
-    if (json.is_discarded()) {
-        error = "Invalid JSON response";
-        return false;
-    }
-
-    if (!json.is_object() || !json.contains("result") || !json["result"].is_object() || !json["result"].contains("status") ||
-        !json["result"]["status"].is_object() || !json["result"]["status"].contains("save_variables") ||
-        !json["result"]["status"]["save_variables"].is_object() || !json["result"]["status"]["save_variables"].contains("variables") ||
-        !json["result"]["status"]["save_variables"]["variables"].is_object()) {
-        // why: Qidi firmware may send null here, but json::value() throws for it.
-        error = "Unexpected JSON structure: save_variables.variables must be an object";
-        return false;
-    }
-
-    status    = json["result"]["status"];
-    variables = status["save_variables"]["variables"];
-    return true;
-}
-
-bool QidiPrinterAgent::fetch_filament_dict(const ConnectionSettings& connection,
                                            QidiFilamentDict& dict,
                                            std::string& error) const
 {
-    std::string url = join_url(connection.base_url, "/server/files/config/officiall_filas_list.cfg");
+    std::string url = join_url(base_url, "/server/files/config/officiall_filas_list.cfg");
 
     std::string response_body;
     bool        success = false;
     std::string http_error;
 
     auto http = Http::get(url);
-    configure_http(http, connection);
+    if (!api_key.empty()) {
-    if (!connection.api_key.empty()) {
+        http.header("X-Api-Key", api_key);
-        http.header("X-Api-Key", connection.api_key);
     }
     http.timeout_connect(5)
         .timeout_max(10)

src/slic3r/Utils/QidiPrinterAgent.hpp

@@ -3,8 +3,6 @@
 
 #include "IPrinterAgent.hpp"
 #include "MoonrakerPrinterAgent.hpp"
-#include "bambu_networking.hpp"
-#include "nlohmann/json_fwd.hpp"
 
 #include <map>
 #include <string>
@@ -16,7 +14,7 @@ class QidiPrinterAgent final : public MoonrakerPrinterAgent
 {
 public:
     explicit QidiPrinterAgent(std::string log_dir);
-    ~QidiPrinterAgent() override { shutdown(); }
+    ~QidiPrinterAgent() override = default;
 
     static AgentInfo get_agent_info_static();
     AgentInfo        get_agent_info() override { return get_agent_info_static(); }
@@ -24,23 +22,7 @@ public:
     // Override filament sync (Qidi-specific implementation)
     bool fetch_filament_info(std::string dev_id, FilamentSyncMode sync_mode = FilamentSyncMode::pull) override;
 
-    static bool parse_slot_response(const std::string& response_body,
-                                    nlohmann::json&    status,
-                                    nlohmann::json&    variables,
-                                    std::string&       error);
-
-    // Print operations — emit QiDi multi-color box config, then delegate to base.
-    int start_print(PrintParams params, OnUpdateStatusFn update_fn, WasCancelledFn cancel_fn, OnWaitFn wait_fn) override;
-    int start_local_print(PrintParams params, OnUpdateStatusFn update_fn, WasCancelledFn cancel_fn) override;
-    int start_local_print_with_record(PrintParams params, OnUpdateStatusFn update_fn, WasCancelledFn cancel_fn, OnWaitFn wait_fn) override;
-    int start_sdcard_print(PrintParams params, OnUpdateStatusFn update_fn, WasCancelledFn cancel_fn) override;
-
-    FilamentSyncMode get_filament_sync_mode() const override;
-
 private:
-    // Push enable_box + value_t<tool> SAVE_VARIABLEs before a print starts.
-    // Returns false if any command fails (caller should abort the print).
-    bool apply_box_mapping(const PrintParams& params) const;
     struct QidiFilamentDict
     {
         std::map<int, std::string> colors;
@@ -48,13 +30,14 @@ private:
     };
 
     // Qidi-specific methods
-    bool fetch_slot_info(const ConnectionSettings& connection,
+    bool fetch_slot_info(const std::string&        base_url,
+                         const std::string&        api_key,
                          const QidiFilamentDict&   dict,
                          const std::string&        series_id,
                          std::vector<AmsTrayData>& trays,
                          int&                      box_count,
                          std::string&              error);
-    bool fetch_filament_dict(const ConnectionSettings& connection, QidiFilamentDict& dict, std::string& error) const;
+    bool fetch_filament_dict(const std::string& base_url, const std::string& api_key, QidiFilamentDict& dict, std::string& error) const;
     std::string normalize_filament_type(const std::string& filament_type);
     std::string infer_series_id(const std::string& model_id, const std::string& dev_name);
     std::string normalize_model_key(std::string value);

src/slic3r/Utils/SnapmakerPrinterAgent.cpp

@@ -2,18 +2,11 @@
 #include "Http.hpp"
 #include "MoonrakerPrinterAgent.hpp"
 #include "IPrinterAgent.hpp"
-#include "bambu_networking.hpp"
 #include "libslic3r/PresetBundle.hpp"
 #include "slic3r/GUI/GUI_App.hpp"
 
 #include "nlohmann/json.hpp"
-#include <atomic>
 #include <boost/log/trivial.hpp>
-#include <chrono>
-#include <cstdint>
-#include <mutex>
-#include <sstream>
-#include <thread>
 #include <vector>
 #include <string>
 #include "libslic3r/Preset.hpp"
@@ -27,25 +20,6 @@ namespace Slic3r {
 namespace {
 
 constexpr const char* SNAPMAKER_AGENT_VERSION = "0.0.1";
-constexpr int64_t     CAMERA_REFRESH_INTERVAL_MS = 300'000;
-
-int64_t now_ms()
-{
-    return std::chrono::duration_cast<std::chrono::milliseconds>(
-        std::chrono::steady_clock::now().time_since_epoch()).count();
-}
-
-// RAII decrement for the in-flight fetch count; movable so a failed thread start still releases it.
-struct InFlightGuard
-{
-    std::atomic<int>* counter;
-    explicit InFlightGuard(std::atomic<int>& c) noexcept : counter(&c) {}
-    InFlightGuard(InFlightGuard&& other) noexcept : counter(other.counter) { other.counter = nullptr; }
-    InFlightGuard(const InFlightGuard&) = delete;
-    InFlightGuard& operator=(const InFlightGuard&) = delete;
-    InFlightGuard& operator=(InFlightGuard&&) = delete;
-    ~InFlightGuard() { if (counter) counter->fetch_sub(1, std::memory_order_relaxed); }
-};
 
 // Safely access a parallel array by index, returning a fallback if out of bounds.
 template<typename T>
@@ -102,31 +76,6 @@ std::string find_closest_color_preset_by_vendor_and_type(const PresetCollection&
 
 SnapmakerPrinterAgent::SnapmakerPrinterAgent(std::string log_dir) : MoonrakerPrinterAgent(std::move(log_dir)) {}
 
-void SnapmakerPrinterAgent::start_camera_monitor()
-{
-    enqueue_command([this] {
-        send_ws_rpc("camera.start_monitor",
-                    {{"domain", "lan"}, {"interval", 0}, {"expect_pw", false}});
-    });
-    m_camera_last_fire_ms.store(now_ms());
-}
-
-void SnapmakerPrinterAgent::on_status_loop_tick(const std::string& dev_id)
-{
-    (void) dev_id;
-    const int64_t last = m_camera_last_fire_ms.load();
-    if (last == 0 || now_ms() - last >= CAMERA_REFRESH_INTERVAL_MS) {
-        start_camera_monitor();
-    }
-}
-
-int SnapmakerPrinterAgent::command_start_camera(std::string dev_id)
-{
-    (void) dev_id;
-    start_camera_monitor();
-    return BAMBU_NETWORK_SUCCESS;
-}
-
 AgentInfo SnapmakerPrinterAgent::get_agent_info_static()
 {
     return AgentInfo{"snapmaker", "Snapmaker", SNAPMAKER_AGENT_VERSION, "Snapmaker printer agent"};
@@ -162,155 +111,127 @@ std::string SnapmakerPrinterAgent::combine_filament_type(const std::string& type
     return base;
 }
 
-bool SnapmakerPrinterAgent::fetch_filament_info(std::string dev_id, FilamentSyncMode sync_mode)
+bool SnapmakerPrinterAgent::fetch_filament_info(std::string dev_id, FilamentSyncMode /*sync_mode*/)
 {
-    (void) dev_id;
+    std::string url = join_url(device_info.base_url, "/printer/objects/query?print_task_config&filament_detect");
-    if (sync_mode != get_filament_sync_mode())
+
+    std::string response_body;
+    bool        success = false;
+    std::string http_error;
+
+    auto http = Http::get(url);
+    if (!device_info.api_key.empty()) {
+        http.header("X-Api-Key", device_info.api_key);
+    }
+    http.timeout_connect(5)
+        .timeout_max(10)
+        .on_complete([&](std::string body, unsigned status) {
+            if (status == 200) {
+                response_body = body;
+                success       = true;
+            } else {
+                http_error = "HTTP error: " + std::to_string(status);
+            }
+        })
+        .on_error([&](std::string body, std::string err, unsigned status) {
+            http_error = err;
+            if (status > 0) {
+                http_error += " (HTTP " + std::to_string(status) + ")";
+            }
+        })
+        .perform_sync();
+
+    if (!success) {
+        BOOST_LOG_TRIVIAL(warning) << "SnapmakerPrinterAgent::fetch_filament_info: HTTP request failed: " << http_error;
         return false;
-
-    std::string base_url;
-    std::string api_key;
-    {
-        std::lock_guard<std::recursive_mutex> lock(connect_mutex);
-        base_url = device_info.base_url;
-        api_key  = device_info.api_key;
     }
 
-    // Reserve under the same mutex shutdown() uses, so the flag and the count can't race.
+    auto json = nlohmann::json::parse(response_body, nullptr, false, true);
-    {
+    if (json.is_discarded()) {
-        std::lock_guard<std::mutex> lock(fetch_lifecycle_mutex);
+        BOOST_LOG_TRIVIAL(warning) << "SnapmakerPrinterAgent::fetch_filament_info: Invalid JSON response";
-        if (shutting_down.load())
+        return false;
-            return false;
-        filament_fetch_in_flight.fetch_add(1, std::memory_order_relaxed);
     }
 
-    InFlightGuard guard{filament_fetch_in_flight};
+    // Navigate to result.status.print_task_config
-    std::thread([this, guard = std::move(guard), base_url, api_key]() {
+    if (!json.contains("result") || !json["result"].contains("status") ||
-        const std::string url = join_url(base_url, "/printer/objects/query?print_task_config&filament_detect");
+        !json["result"]["status"].contains("print_task_config")) {
+        BOOST_LOG_TRIVIAL(warning) << "SnapmakerPrinterAgent::fetch_filament_info: Missing print_task_config in response";
+        return false;
+    }
 
-        std::string response_body;
+    auto& ptc = json["result"]["status"]["print_task_config"];
-        bool success = false;
-        std::string http_error;
 
-        auto http = Http::get(url);
+    // Read parallel arrays from print_task_config
-        if (!api_key.empty()) {
+    auto filament_exist    = ptc.value("filament_exist", std::vector<bool>{});
-            http.header("X-Api-Key", api_key);
+    auto filament_type     = ptc.value("filament_type", std::vector<std::string>{});
-        }
+    auto filament_sub_type = ptc.value("filament_sub_type", std::vector<std::string>{});
-        http.timeout_connect(5)
+    auto filament_color    = ptc.value("filament_color_rgba", std::vector<std::string>{});
-            .timeout_max(10)
+    auto filament_vendor   = ptc.value("filament_vendor", std::vector<std::string>{});
-            .on_complete([&](std::string body, unsigned status) {
+
-                if (status == 200) {
+    const int slot_count = static_cast<int>(filament_exist.size());
-                    response_body = body;
+    if (slot_count == 0) {
-                    success       = true;
+        BOOST_LOG_TRIVIAL(info) << "SnapmakerPrinterAgent::fetch_filament_info: No filament slots reported";
+        return false;
+    }
+
+    // Read NFC filament_detect data for temperature info (optional)
+    nlohmann::json nfc_info;
+    if (json["result"]["status"].contains("filament_detect") &&
+        json["result"]["status"]["filament_detect"].contains("info")) {
+        nfc_info = json["result"]["status"]["filament_detect"]["info"];
+    }
+
+    static const std::string empty_str;
+    static const std::string default_color = "FFFFFFFF";
+
+    std::vector<AmsTrayData> trays;
+    trays.reserve(slot_count);
+
+    for (int i = 0; i < slot_count; ++i) {
+        AmsTrayData tray;
+        tray.slot_index   = i;
+        tray.has_filament = filament_exist[i];
+
+        if (tray.has_filament) {
+            tray.tray_type     = combine_filament_type(safe_at(filament_type, i, empty_str),
+                                                       safe_at(filament_sub_type, i, empty_str));
+            tray.tray_color    = safe_at(filament_color, i, default_color);
+
+            auto* bundle = GUI::wxGetApp().preset_bundle;
+            // Try to find a matching preset for this filament based on vendor, type and color.
+            // If not found, default to traditional search by type only or generic type mapping.
+            if (bundle) {
+                std::string vendor      = safe_at(filament_vendor, i, empty_str);
+                std::string filament_id = find_closest_color_preset_by_vendor_and_type(bundle->filaments, vendor, tray.tray_type,
+                                                                                       tray.tray_color);
+
+                if (!filament_id.empty()) {
+                    tray.tray_info_idx = filament_id;
+                    BOOST_LOG_TRIVIAL(warning) << "Filament sync: Found manufacturer-specific profile for slot " << i << ": "
+                                               << filament_id;
                 } else {
-                    http_error = "HTTP error: " + std::to_string(status);
+                    tray.tray_info_idx = bundle->filaments.filament_id_by_type(tray.tray_type);
-                }
-            })
-            .on_error([&](std::string body, std::string err, unsigned status) {
-                http_error = err;
-                if (status > 0) {
-                    http_error += " (HTTP " + std::to_string(status) + ")";
-                }
-            })
-            .perform_sync();
-
-        if (!success) {
-            BOOST_LOG_TRIVIAL(warning) << "SnapmakerPrinterAgent::fetch_filament_info: HTTP request failed: " << http_error;
-            return;
-        }
-
-        auto json = nlohmann::json::parse(response_body, nullptr, false, true);
-        if (json.is_discarded()) {
-            BOOST_LOG_TRIVIAL(warning) << "SnapmakerPrinterAgent::fetch_filament_info: Invalid JSON response";
-            return;
-        }
-
-        // Navigate to result.status.print_task_config
-        if (!json.contains("result") || !json["result"].contains("status") || !json["result"]["status"].contains("print_task_config")) {
-            BOOST_LOG_TRIVIAL(warning) << "SnapmakerPrinterAgent::fetch_filament_info: Missing print_task_config in response";
-            return;
-        }
-
-        auto& ptc = json["result"]["status"]["print_task_config"];
-
-        // Read parallel arrays from print_task_config
-        auto filament_exist    = ptc.value("filament_exist", std::vector<bool>{});
-        auto filament_type     = ptc.value("filament_type", std::vector<std::string>{});
-        auto filament_sub_type = ptc.value("filament_sub_type", std::vector<std::string>{});
-        auto filament_color    = ptc.value("filament_color_rgba", std::vector<std::string>{});
-        auto filament_vendor   = ptc.value("filament_vendor", std::vector<std::string>{});
-
-        const int slot_count = static_cast<int>(filament_exist.size());
-        if (slot_count == 0) {
-            BOOST_LOG_TRIVIAL(info) << "SnapmakerPrinterAgent::fetch_filament_info: No filament slots reported";
-            return;
-        }
-
-        // Read NFC filament_detect data for temperature info (optional)
-        nlohmann::json nfc_info;
-        if (json["result"]["status"].contains("filament_detect") && json["result"]["status"]["filament_detect"].contains("info")) {
-            nfc_info = json["result"]["status"]["filament_detect"]["info"];
-        }
-
-        static const std::string empty_str;
-        static const std::string default_color = "FFFFFFFF";
-
-        std::vector<AmsTrayData> trays;
-        trays.reserve(slot_count);
-
-        for (int i = 0; i < slot_count; ++i) {
-            AmsTrayData tray;
-            tray.slot_index   = i;
-            tray.has_filament = filament_exist[i];
-
-            if (tray.has_filament) {
-                tray.tray_type  = combine_filament_type(safe_at(filament_type, i, empty_str), safe_at(filament_sub_type, i, empty_str));
-                tray.tray_color = safe_at(filament_color, i, default_color);
-
-                auto* bundle = GUI::wxGetApp().preset_bundle;
-                // Try to find a matching preset for this filament based on vendor, type and color.
-                // If not found, default to traditional search by type only or generic type mapping.
-                if (bundle) {
-                    std::string vendor      = safe_at(filament_vendor, i, empty_str);
-                    std::string filament_id = find_closest_color_preset_by_vendor_and_type(bundle->filaments, vendor, tray.tray_type,
-                                                                                           tray.tray_color);
-
-                    if (!filament_id.empty()) {
-                        tray.tray_info_idx = filament_id;
-                        BOOST_LOG_TRIVIAL(warning)
-                            << "Filament sync: Found manufacturer-specific profile for slot " << i << ": " << filament_id;
-                    } else {
-                        tray.tray_info_idx = bundle->filaments.filament_id_by_type(tray.tray_type);
-                    }
-                } else {
-                    tray.tray_info_idx = map_filament_type_to_generic_id(tray.tray_type);
-                }
-
-                // Extract NFC temperature data if available
-                if (nfc_info.is_array() && i < static_cast<int>(nfc_info.size()) && nfc_info[i].is_object()) {
-                    auto& nfc_slot     = nfc_info[i];
-                    std::string vendor = nfc_slot.value("VENDOR", "NONE");
-                    if (vendor != "NONE" && !vendor.empty()) {
-                        tray.bed_temp    = nfc_slot.value("BED_TEMP", 0);
-                        tray.nozzle_temp = nfc_slot.value("FIRST_LAYER_TEMP", 0);
-                    }
                 }
+            } else {
+                tray.tray_info_idx = map_filament_type_to_generic_id(tray.tray_type);
             }
 
-            trays.emplace_back(std::move(tray));
+            // Extract NFC temperature data if available
+            if (nfc_info.is_array() && i < static_cast<int>(nfc_info.size()) && nfc_info[i].is_object()) {
+                auto& nfc_slot = nfc_info[i];
+                std::string vendor = nfc_slot.value("VENDOR", "NONE");
+                if (vendor != "NONE" && !vendor.empty()) {
+                    tray.bed_temp    = nfc_slot.value("BED_TEMP", 0);
+                    tray.nozzle_temp = nfc_slot.value("FIRST_LAYER_TEMP", 0);
+                }
+            }
         }
 
-        build_ams_payload(1, slot_count - 1, trays);
+        trays.emplace_back(std::move(tray));
-    }).detach();
+    }
 
+    build_ams_payload(1, slot_count - 1, trays);
     return true;
 }
 
-FilamentSyncMode SnapmakerPrinterAgent::get_filament_sync_mode() const
-{
-    if (GUI::wxGetApp().app_config->get_bool("use_printer_agents"))
-        return FilamentSyncMode::subscription;
-    return FilamentSyncMode::pull;
-}
-
 } // namespace Slic3r

src/slic3r/Utils/SnapmakerPrinterAgent.hpp

@@ -3,8 +3,6 @@
 #include "IPrinterAgent.hpp"
 #include "MoonrakerPrinterAgent.hpp"
 
-#include <atomic>
-#include <cstdint>
 #include <string>
 
 namespace Slic3r {
@@ -13,25 +11,16 @@ class SnapmakerPrinterAgent final : public MoonrakerPrinterAgent
 {
 public:
     explicit SnapmakerPrinterAgent(std::string log_dir);
-    ~SnapmakerPrinterAgent() override { shutdown(); }
+    ~SnapmakerPrinterAgent() override = default;
 
     static AgentInfo get_agent_info_static();
     AgentInfo        get_agent_info() override { return get_agent_info_static(); }
 
     bool fetch_filament_info(std::string dev_id, FilamentSyncMode sync_mode = FilamentSyncMode::pull) override;
-    FilamentSyncMode get_filament_sync_mode() const override;
-    int command_start_camera(std::string dev_id) override;
-    CameraStreamMode get_camera_stream_mode() const override { return CameraStreamMode::http_snapshot; }
-    std::string get_camera_url() const override { return device_info.base_url + "/server/files/camera/monitor.jpg"; }
 
 private:
     // Combine filament_type + filament_sub_type into a unified type string
     static std::string combine_filament_type(const std::string& type, const std::string& sub_type);
-
-    void start_camera_monitor();
-    void on_status_loop_tick(const std::string& dev_id) override;
-
-    std::atomic<int64_t> m_camera_last_fire_ms{0};
 };
 
 } // namespace Slic3r

src/slic3r/Utils/json_diff.hpp

@@ -9,7 +9,6 @@
 
 
 using json = nlohmann::json;
-using namespace std;
 
 class json_diff
 {

tests/fff_print/test_perimeters.cpp

@@ -19,8 +19,10 @@
 #include <cstddef>
 #include "libslic3r/libslic3r.h"
 #include "libslic3r/BoundingBox.hpp"
+#include "libslic3r/ClipperUtils.hpp"
 #include "libslic3r/ExPolygon.hpp"
 #include "libslic3r/Point.hpp"
+#include "libslic3r/Polyline.hpp"
 #include <limits>
 #include <string>
 #include <utility>
@@ -275,6 +277,124 @@ TEST_CASE("Only one wall on the first layer needs a bottom shell", "[Perimeters]
 
 namespace {
 
+// The last layer of the tab, whose top surface shares an island with the tube walls rising past it.
+const double tab_top_z = 5.0;
+
+// With the widths below the tube walls are 1.10mm wide once the precise outer wall offset (0.043mm a side) is
+// taken off. That is narrower than 3 outer wall spacings (3 x 0.377 = 1.131mm), so an Arachne pass limited to a
+// single wall fills it by widening its 2 beads, yet wide enough for the full 2 wall pass to add a middle wall
+// (from 1.062mm).
+const double narrow_wall = 1.186;
+
+// A 20x30x10 tube with narrow_wall thick walls, and a 20x8x5 tab against its -Y side.
+Print &tube_with_tab(Print &print, Model &model, const DynamicPrintConfig &config)
+{
+    ModelObject *object = model.add_object();
+    object->name = "tube_with_tab.stl";
+    object->add_volume(make_cube(20., 30., 10.), ModelVolumeType::MODEL_PART, false);
+    // Overlaps the tube wall by 0.5mm so the two parts slice as one island.
+    TriangleMesh tab = make_cube(20., 8.5, 5.);
+    tab.translate(0.f, -8.f, 0.f);
+    object->add_volume(std::move(tab), ModelVolumeType::MODEL_PART, false);
+    TriangleMesh bore = make_cube(20. - 2. * narrow_wall, 30. - 2. * narrow_wall, 12.);
+    bore.translate(float(narrow_wall), float(narrow_wall), -1.f);
+    object->add_volume(std::move(bore), ModelVolumeType::NEGATIVE_VOLUME, false);
+    object->add_instance();
+    object->ensure_on_bed();
+
+    print.auto_assign_extruders(object);
+    print.apply(model, config);
+    print.validate();
+    print.set_status_silent();
+    return print;
+}
+
+// Every width the narrow_wall arithmetic depends on, so none of them rests on a default.
+DynamicPrintConfig narrow_wall_config(bool only_one_wall_top, double top_surface_expansion)
+{
+    DynamicPrintConfig config = base_config("arachne");
+    config.set_deserialize_strict({
+        { "wall_loops",            2 },
+        { "nozzle_diameter",       "0.4" },
+        { "line_width",            0.42 },
+        { "outer_wall_line_width", 0.42 },
+        { "inner_wall_line_width", 0.45 },
+        { "min_bead_width",        "85%" },
+        { "precise_outer_wall",    true },
+        { "wall_sequence",         "inner wall/outer wall" },
+        { "only_one_wall_top",     only_one_wall_top },
+        { "top_surface_expansion", top_surface_expansion },
+    });
+    return config;
+}
+
+// Inner wall length the layer at print_z extrudes within 3mm of its +Y edge: the tube wall facing away from the tab.
+double far_wall_inner_wall_length(const Print &print, double print_z)
+{
+    for (const Layer *layer : print.objects().front()->layers()) {
+        if (std::abs(layer->print_z - print_z) > EPSILON)
+            continue;
+        BoundingBox band = get_extents(layer->lslices);
+        band.min.y()     = band.max.y() - scaled<coord_t>(3.);
+
+        Polylines inner_walls;
+        auto      collect = [&inner_walls](const ExtrusionPaths &paths) {
+            for (const ExtrusionPath &path : paths)
+                if (path.role() == erPerimeter)
+                    inner_walls.emplace_back(path.as_polyline());
+        };
+        for (const LayerRegion *region : layer->regions()) {
+            const ExtrusionEntityCollection walls = region->perimeters.flatten();
+            for (const ExtrusionEntity *entity : walls.entities) {
+                if (const auto *loop = dynamic_cast<const ExtrusionLoop*>(entity))
+                    collect(loop->paths);
+                else if (const auto *multi_path = dynamic_cast<const ExtrusionMultiPath*>(entity))
+                    collect(multi_path->paths);
+                else if (const auto *path = dynamic_cast<const ExtrusionPath*>(entity))
+                    collect({ *path });
+            }
+        }
+        return unscaled<double>(total_length(intersection_pl(inner_walls, band.polygon())));
+    }
+    return 0.;
+}
+
+} // namespace
+
+// only_one_wall_top first lays out an island with a single Arachne wall and generates the inner walls inside it.
+// On a wall narrower than 3 outer wall spacings that single wall pass widens its 2 beads to fill the wall and leaves
+// no room for the middle wall, which is only intended over the top surface. The tube walls away from the tab are not
+// under the tab's top surface, so on the tab's last layer they keep the inner wall they get with the option off.
+TEST_CASE("Only one wall on top surfaces keeps the inner walls of narrow walls away from the top surface", "[Perimeters]")
+{
+    // 0 re-onions the region beside the top surface, 2 clips the inner walls over it.
+    const double top_surface_expansion = GENERATE(0.0, 2.0);
+    CAPTURE(top_surface_expansion);
+
+    struct TabTopLayer {
+        double perimeters;
+        double far_wall_inner_walls;
+    };
+    auto tab_top_layer_for = [top_surface_expansion](bool only_one_wall_top) {
+        Print print;
+        Model model;
+        tube_with_tab(print, model, narrow_wall_config(only_one_wall_top, top_surface_expansion));
+        print.process();
+        REQUIRE_FALSE(print.objects().empty());
+        return TabTopLayer{ perimeter_length_at(print, tab_top_z), far_wall_inner_wall_length(print, tab_top_z) };
+    };
+
+    const TabTopLayer plain    = tab_top_layer_for(false);
+    const TabTopLayer one_wall = tab_top_layer_for(true);
+
+    // The option acts on this layer: the inner walls under the tab's top surface are gone.
+    REQUIRE(plain.far_wall_inner_walls > 10.);
+    CHECK(one_wall.perimeters < plain.perimeters);
+    CHECK_THAT(one_wall.far_wall_inner_walls, Catch::Matchers::WithinAbs(plain.far_wall_inner_walls, 1.0));
+}
+
+namespace {
+
 // The layer that closes the cavity of box_over_cavity(), the first one printed over air.
 const double cavity_ceiling_z = 6.2;
 

tests/slic3rutils/CMakeLists.txt

@@ -25,7 +25,6 @@ add_executable(${_TEST_NAME}_tests
     test_plugin_capabilities_in_use.cpp
     test_plugin_status.cpp
     test_printer_agent.cpp
-    test_qidi_printer_agent.cpp
     test_plugin_install.cpp
     test_plugin_lifecycle.cpp
     test_plugin_printer_agent.cpp

tests/slic3rutils/test_printer_agent.cpp

@@ -1,29 +1,18 @@
 #include <catch2/catch_all.hpp>
 
-#include <functional>
-#include <slic3r/Utils/BBLPrinterAgent.hpp>
-#include <slic3r/Utils/IPrinterAgent.hpp>
-#include <slic3r/Utils/MoonrakerPrinterAgent.hpp>
 #include <memory>
 #include <slic3r/Utils/NetworkAgentFactory.hpp>
 
 #include <catch2/catch_test_macros.hpp>
 #include <pybind11/pytypes.h>
 #include <catch2/catch_message.hpp>
-#include "catch2/catch_approx.hpp"
 #include "python_test_support.hpp"
 
 #include <pybind11/embed.h>
 #include <pybind11/pybind11.h>
 
-#include <atomic>
-#include <chrono>
-#include <future>
-#include <slic3r/Utils/bambu_networking.hpp>
 #include <string>
-#include <thread>
 #include <pybind11/cast.h>
-#include <utility>
 
 namespace Slic3r { class ICloudServiceAgent; }
 namespace Slic3r { class IPrinterAgent; }
@@ -31,259 +20,6 @@ namespace Slic3r { class IPrinterAgent; }
 using namespace Slic3r;
 namespace py = pybind11;
 
-class MoonrakerParserProbe : public MoonrakerPrinterAgent
-{
-public:
-    using MoonrakerPrinterAgent::parse_nozzle_diameter;
-
-    explicit MoonrakerParserProbe(std::string log_dir) : MoonrakerPrinterAgent(std::move(log_dir)) {}
-};
-
-TEST_CASE("Moonraker parses nozzle diameter from configfile settings", "[unit][moonraker]")
-{
-    const auto response = nlohmann::json::parse(R"({
-        "result": {
-            "status": {
-                "configfile": {
-                    "settings": {
-                        "extruder": {
-                            "nozzle_diameter": 0.6
-                        }
-                    }
-                }
-            }
-        }
-    })");
-
-    CHECK(MoonrakerParserProbe::parse_nozzle_diameter(response) == Catch::Approx(0.6f));
-}
-
-TEST_CASE("Moonraker parses nozzle diameter from raw config and tolerates missing data", "[unit][moonraker]")
-{
-    const auto raw_config_response = nlohmann::json::parse(R"({
-        "result": {
-            "status": {
-                "configfile": {
-                    "config": {
-                        "extruder": {
-                            "nozzle_diameter": "0.8"
-                        }
-                    }
-                }
-            }
-        }
-    })");
-    const auto missing_response = nlohmann::json::object();
-
-    CHECK(MoonrakerParserProbe::parse_nozzle_diameter(raw_config_response) == Catch::Approx(0.8f));
-    CHECK(MoonrakerParserProbe::parse_nozzle_diameter(missing_response) == 0.0f);
-}
-
-// why: an agent without a Bambu-dialect translation must refuse these commands before any network or wx path.
-TEST_CASE("unit: default AMS commands report not supported", "[unit][moonraker]")
-{
-    MoonrakerPrinterAgent agent("");
-
-    CHECK(agent.command_ams_refresh_rfid("dev", 123, 1, 0, false) == ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED);
-    CHECK(agent.command_ams_calibrate("dev", 1, 2, false) == ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED);
-    CHECK(agent.command_ams_select_tray("dev", "123", 3, false) == ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED);
-}
-
-TEST_CASE("unit: Moonraker light name matching", "[unit][moonraker]")
-{
-    CHECK(moonraker_is_light_name("caselight"));
-    CHECK(moonraker_is_light_name("LED_STRIP"));
-    CHECK_FALSE(moonraker_is_light_name("beeper"));
-    CHECK(moonraker_is_light_name("FLASHLIGHT_SWITCH"));
-    CHECK(moonraker_is_light_name("MODLELIGHT_SWITCH"));
-}
-
-// ===========================================================================
-// UNIT - handle_request's not-supported default.
-// The agent is the only thing that knows what it can translate, so an untranslated
-// command has to say so instead of returning success and letting the UI believe the
-// control worked. Guards the inverse too: the pushing namespace is genuinely
-// satisfied by the websocket status stream, and it re-fires from the keepalive timer
-// roughly once a second, so it must stay a success or it would raise a dialog on a
-// timer. Only branches that touch neither the network nor wx are exercised.
-// ===========================================================================
-TEST_CASE("unit: Moonraker reports untranslated commands as not supported", "[unit][moonraker]")
-{
-    MoonrakerPrinterAgent agent("");
-
-    CHECK(agent.send_message("dev", R"({"print":{"command":"ams_change_filament"}})", 0, 0) ==
-          ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED);
-    CHECK(agent.send_message("dev", R"({"system":{"command":"set_door_stat"}})", 0, 0) ==
-          ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED);
-    CHECK(agent.send_message("dev", R"({"xcam":{"command":"xcam_control_set"}})", 0, 0) ==
-          ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED);
-
-    CHECK(agent.send_message("dev", R"({"pushing":{"command":"pushall"}})", 0, 0) == BAMBU_NETWORK_SUCCESS);
-    CHECK(agent.send_message("dev", R"({"pushing":{"command":"start"}})", 0, 0) == BAMBU_NETWORK_SUCCESS);
-
-    // why: malformed input is a different failure than an untranslated command, and the
-    // default must not swallow it into a misleading not-supported verdict.
-    CHECK(agent.send_message("dev", "{not json", 0, 0) == BAMBU_NETWORK_ERR_INVALID_RESULT);
-}
-
-// why: IPrinterAgent::fetch_filament_info is the single virtual hook derived agents override
-// (MoonrakerPrinterAgent's own override is synchronous, but QidiPrinterAgent's override is
-// fire-and-forget: it spawns a detached thread and returns immediately). QidiPrinterAgent is
-// `final`, so this probes the same contract with a controllable double instead.
-TEST_CASE("unit: a fire-and-forget override of fetch_filament_info is not waited on by the caller",
-          "[unit][moonraker]")
-{
-    class RecordingAgent : public Slic3r::MoonrakerPrinterAgent
-    {
-    public:
-        explicit RecordingAgent(std::string log_dir) : MoonrakerPrinterAgent(std::move(log_dir)) {}
-
-        std::atomic<bool>  invoked{false};
-        std::promise<void> release_gate;
-        std::promise<void> done_promise;
-
-        bool fetch_filament_info(std::string /*dev_id*/, FilamentSyncMode /*sync_mode*/ = FilamentSyncMode::pull) override
-        {
-            std::thread([this]() {
-                invoked.store(true);
-                // Block here until the test explicitly releases us, proving the caller
-                // (fetch_filament_info) does not wait for this to run.
-                release_gate.get_future().wait();
-                done_promise.set_value();
-            }).detach();
-            return true;
-        }
-    };
-
-    auto agent = std::make_shared<RecordingAgent>(std::string{});
-    auto done_future = agent->done_promise.get_future();
-
-    bool immediate_result = agent->fetch_filament_info("test-dev");
-
-    // fetch_filament_info must return before its background work completes — prove
-    // it by confirming the background call is still blocked on the gate right now.
-    REQUIRE(immediate_result == true);
-    REQUIRE(done_future.wait_for(std::chrono::milliseconds(100)) == std::future_status::timeout);
-
-    // Now let the background call finish and confirm it actually ran (polymorphic dispatch).
-    agent->release_gate.set_value();
-    REQUIRE(done_future.wait_for(std::chrono::seconds(2)) == std::future_status::ready);
-    REQUIRE(agent->invoked.load() == true);
-}
-
-namespace {
-
-// Globals so a parked proxy fetch thread never dereferences a freed agent.
-std::atomic<int>  g_deferred_fetch_running{0};
-std::atomic<bool> g_deferred_destroy_returned{false};
-
-// Joins on scope exit so a throwing REQUIRE does not std::terminate.
-class ScopedJoiner
-{
-public:
-    explicit ScopedJoiner(std::thread& t) : m_thread(t) {}
-    ~ScopedJoiner() { if (m_thread.joinable()) m_thread.join(); }
-    ScopedJoiner(const ScopedJoiner&) = delete;
-    ScopedJoiner& operator=(const ScopedJoiner&) = delete;
-
-private:
-    std::thread& m_thread;
-};
-
-// A fetch that parks before touching the in-flight counter, so teardown's wait can
-// observe zero first.
-class DeferredFetchAgent : public MoonrakerPrinterAgent
-{
-public:
-    explicit DeferredFetchAgent(std::string log_dir) : MoonrakerPrinterAgent(std::move(log_dir)) {}
-
-    // Shared so a parked proxy fetch can never outlive the stack that owns it.
-    std::shared_ptr<std::promise<void>> entered{std::make_shared<std::promise<void>>()};
-    std::shared_ptr<std::promise<void>> allow_fetch{std::make_shared<std::promise<void>>()};
-    std::shared_ptr<std::promise<void>> allow_finish{std::make_shared<std::promise<void>>()};
-
-    // Runs the callable on the command worker, which teardown joins.
-    void post(std::function<void()> fn) { enqueue_command(std::move(fn)); }
-
-    bool fetch_filament_info(std::string /*dev_id*/, FilamentSyncMode /*sync_mode*/ = FilamentSyncMode::pull) override
-    {
-        // Resumes after ~DeferredFetchAgent destroyed these members; snapshot up front.
-        auto entered_p      = entered;
-        auto allow_fetch_p  = allow_fetch;
-        auto allow_finish_p = allow_finish;
-
-        entered_p->set_value();
-        allow_fetch_p->get_future().wait();
-
-        filament_fetch_in_flight.fetch_add(1, std::memory_order_relaxed);
-        std::thread([this, finish = std::move(allow_finish_p)] {
-            struct InFlightGuard
-            {
-                std::atomic<int>& counter;
-                ~InFlightGuard() { counter.fetch_sub(1, std::memory_order_relaxed); }
-            } guard{filament_fetch_in_flight};
-
-            g_deferred_fetch_running.fetch_add(1, std::memory_order_relaxed);
-            finish->get_future().wait();
-            g_deferred_fetch_running.fetch_sub(1, std::memory_order_relaxed);
-        }).detach();
-        return true;
-    }
-};
-
-} // namespace
-
-// REGRESSION - teardown must not return while a fetch it started is in flight.
-// The command worker parks a fetch before it reserves the in-flight slot, forcing
-// the "wait already observed zero" interleaving deterministically.
-TEST_CASE("an agent's destruction waits for a fetch started by its worker during teardown",
-          "[unit][moonraker][Regression]")
-{
-    g_deferred_fetch_running.store(0);
-    g_deferred_destroy_returned.store(false);
-
-    auto agent        = std::make_shared<DeferredFetchAgent>(std::string{});
-    auto entered      = agent->entered;
-    auto allow_fetch  = agent->allow_fetch;
-    auto allow_finish = agent->allow_finish;
-
-    // Park a fetch inside the command worker while the agent is still complete.
-    agent->post([ptr = agent.get()] { ptr->fetch_filament_info("dev", FilamentSyncMode::pull); });
-    REQUIRE(entered->get_future().wait_for(std::chrono::seconds(5)) == std::future_status::ready);
-
-    // Destroy on another thread so this one can drive the parked fetch.
-    std::thread destroyer([owned = std::move(agent)]() mutable {
-        owned.reset();
-        g_deferred_destroy_returned.store(true);
-    });
-    ScopedJoiner join_destroyer{destroyer};
-
-    // Let teardown pass its wait; the worker has not reserved yet.
-    std::this_thread::sleep_for(std::chrono::milliseconds(300));
-    allow_fetch->set_value();
-
-    // Get the fetch actually in flight (parked on allow_finish).
-    for (int i = 0; i < 200 && g_deferred_fetch_running.load() == 0; ++i)
-        std::this_thread::sleep_for(std::chrono::milliseconds(10));
-    REQUIRE(g_deferred_fetch_running.load() == 1);
-
-    // A correct teardown cannot return while the fetch is parked; give a buggy one time.
-    for (int i = 0; i < 200 && !g_deferred_destroy_returned.load(); ++i)
-        std::this_thread::sleep_for(std::chrono::milliseconds(10));
-
-    if (g_deferred_destroy_returned.load()) {
-        // Bug: teardown returned with a fetch still running. Don't release allow_finish.
-        CHECK(g_deferred_fetch_running.load() == 0);
-        return;
-    }
-
-    // Fixed order: destruction is still blocked on the in-flight fetch.
-    allow_finish->set_value();
-    destroyer.join();
-    CHECK(g_deferred_destroy_returned.load());
-    CHECK(g_deferred_fetch_running.load() == 0);
-}
-
 // ===========================================================================
 // UNIT - printer-agent registry duplicate handling.
 // Confirms a duplicate agent id is rejected so a plugin cannot shadow a built-in

tests/slic3rutils/test_qidi_printer_agent.cpp

@@ -1,134 +0,0 @@
-#include "catch2/catch_test_macros.hpp"
-#include "catch2/matchers/catch_matchers.hpp"
-#include "catch2/matchers/catch_matchers_string.hpp"
-#include <catch2/catch_all.hpp>
-
-#include <nlohmann/json.hpp>
-
-#include <slic3r/Utils/QidiPrinterAgent.hpp>
-
-#include <string>
-
-using namespace Slic3r;
-
-TEST_CASE("Qidi slot response rejects null variables without throwing", "[QidiPrinterAgent]")
-{
-    const std::string response = R"({
-        "result": {
-            "status": {
-                "save_variables": {
-                    "variables": null
-                }
-            }
-        }
-    })";
-    nlohmann::json status;
-    nlohmann::json variables;
-    std::string    error;
-    bool           parsed = true;
-
-    REQUIRE_NOTHROW(parsed = QidiPrinterAgent::parse_slot_response(response, status, variables, error));
-    CHECK_FALSE(parsed);
-    CHECK_THAT(error, Catch::Matchers::ContainsSubstring("variables"));
-    CHECK_THAT(error, Catch::Matchers::ContainsSubstring("object"));
-}
-
-TEST_CASE("Qidi slot response rejects missing and non-object fields without throwing", "[QidiPrinterAgent]")
-{
-    std::string response;
-
-    SECTION("missing result")
-    {
-        response = R"({})";
-    }
-
-    SECTION("non-object result")
-    {
-        response = R"({"result":null})";
-    }
-
-    SECTION("missing status")
-    {
-        response = R"({"result":{}})";
-    }
-
-    SECTION("non-object status")
-    {
-        response = R"({"result":{"status":null}})";
-    }
-
-    SECTION("missing save_variables")
-    {
-        response = R"({"result":{"status":{}}})";
-    }
-
-    SECTION("non-object save_variables")
-    {
-        response = R"({"result":{"status":{"save_variables":null}}})";
-    }
-
-    SECTION("missing variables")
-    {
-        response = R"({"result":{"status":{"save_variables":{}}}})";
-    }
-
-    SECTION("scalar")
-    {
-        response = R"({"result":{"status":{"save_variables":{"variables":42}}}})";
-    }
-
-    SECTION("array")
-    {
-        response = R"({"result":{"status":{"save_variables":{"variables":[]}}}})";
-    }
-
-    nlohmann::json status;
-    nlohmann::json variables;
-    std::string    error;
-    bool           parsed = true;
-
-    REQUIRE_NOTHROW(parsed = QidiPrinterAgent::parse_slot_response(response, status, variables, error));
-    CHECK_FALSE(parsed);
-}
-
-TEST_CASE("Qidi slot response exposes valid status and variables", "[QidiPrinterAgent]")
-{
-    const std::string response = R"({
-        "result": {
-            "status": {
-                "save_variables": {
-                    "variables": {
-                        "box_count": 2,
-                        "color_slot0": 3
-                    }
-                },
-                "box_stepper slot0": {
-                    "runout_button": 0
-                }
-            }
-        }
-    })";
-    nlohmann::json status;
-    nlohmann::json variables;
-    std::string    error;
-    bool           parsed = false;
-
-    REQUIRE_NOTHROW(parsed = QidiPrinterAgent::parse_slot_response(response, status, variables, error));
-    REQUIRE(parsed);
-    CHECK(status.is_object());
-    CHECK(variables.is_object());
-    CHECK(variables.at("box_count") == 2);
-    CHECK(status.contains("box_stepper slot0"));
-}
-
-TEST_CASE("Qidi slot response rejects invalid JSON", "[QidiPrinterAgent]")
-{
-    nlohmann::json status;
-    nlohmann::json variables;
-    std::string    error;
-    bool           parsed = true;
-
-    REQUIRE_NOTHROW(parsed = QidiPrinterAgent::parse_slot_response("{not json", status, variables, error));
-    CHECK_FALSE(parsed);
-    CHECK(error == "Invalid JSON response");
-}