Merge branch 'main' into feat/filament_dialog_fix

WebGuide's filament list dropped presets whose vendor and type came from different ancestors, and looped forever on inherits cycles. Walk the full inherits chain with a path-scoped guard, fill only missing values, and skip presets that still lack vendor or type. Add tests for split-base resolution and validate the real profile tree.

CMakeLists.txt

@@ -826,37 +826,6 @@ find_package(OpenSSL REQUIRED)
 find_package(CURL REQUIRED)
 find_package(Freetype REQUIRED)
 
-if (SLIC3R_GUI)
-    # LibDataChannel's installed export references its bundled dependencies,
-    # but does not install their CMake targets. Recreate those targets from
-    # the same dependency prefix before loading the LibDataChannel config.
-    if (NOT TARGET Usrsctp::usrsctp)
-        find_library(_ORCA_USRSCTP_LIBRARY NAMES usrsctp
-            PATHS "${CMAKE_PREFIX_PATH}/lib" NO_DEFAULT_PATH)
-        if (_ORCA_USRSCTP_LIBRARY)
-            add_library(Usrsctp::usrsctp UNKNOWN IMPORTED GLOBAL)
-            set_target_properties(Usrsctp::usrsctp PROPERTIES
-                IMPORTED_LOCATION "${_ORCA_USRSCTP_LIBRARY}"
-                IMPORTED_LINK_INTERFACE_LANGUAGES C
-                INTERFACE_LINK_LIBRARIES "Threads::Threads")
-        endif()
-    endif()
-
-    if (NOT TARGET LibJuice::LibJuice)
-        find_library(_ORCA_LIBJUICE_LIBRARY NAMES juice
-            PATHS "${CMAKE_PREFIX_PATH}/lib" NO_DEFAULT_PATH)
-        if (_ORCA_LIBJUICE_LIBRARY)
-            add_library(LibJuice::LibJuice UNKNOWN IMPORTED GLOBAL)
-            set_target_properties(LibJuice::LibJuice PROPERTIES
-                IMPORTED_LOCATION "${_ORCA_LIBJUICE_LIBRARY}"
-                IMPORTED_LINK_INTERFACE_LANGUAGES C
-                INTERFACE_LINK_LIBRARIES "Threads::Threads")
-        endif()
-    endif()
-
-    find_package(LibDataChannel CONFIG REQUIRED)
-endif()
-
 
 add_library(libcurl INTERFACE)
 target_link_libraries(libcurl INTERFACE CURL::libcurl)
@@ -1137,7 +1106,6 @@ function(orcaslicer_copy_dlls target config postfix output_dlls)
     endif ()
     file(COPY ${_occt_dlls}
             ${CMAKE_PREFIX_PATH}/bin/freetype.dll
-            ${CMAKE_PREFIX_PATH}/bin/avformat-61.dll
             ${CMAKE_PREFIX_PATH}/bin/avcodec-61.dll
             ${CMAKE_PREFIX_PATH}/bin/swresample-5.dll
             ${CMAKE_PREFIX_PATH}/bin/swscale-8.dll
@@ -1150,7 +1118,6 @@ function(orcaslicer_copy_dlls target config postfix output_dlls)
         ${_out_dir}/WebView2Loader.dll
 
         ${_out_dir}/freetype.dll
-        ${_out_dir}/avformat-61.dll
         ${_out_dir}/avcodec-61.dll
         ${_out_dir}/swresample-5.dll
         ${_out_dir}/swscale-8.dll
@@ -1174,10 +1141,7 @@ function(orcaslicer_copy_sos target config postfix output_sos)
         set(_out_dir "${CMAKE_CURRENT_BINARY_DIR}")
     endif ()
 
-    file(COPY ${CMAKE_PREFIX_PATH}/lib/libavformat.so
-            ${CMAKE_PREFIX_PATH}/lib/libavformat.so.61
-            ${CMAKE_PREFIX_PATH}/lib/libavformat.so.61.1.100
-            ${CMAKE_PREFIX_PATH}/lib/libavcodec.so
+    file(COPY ${CMAKE_PREFIX_PATH}/lib/libavcodec.so
             ${CMAKE_PREFIX_PATH}/lib/libavcodec.so.61
             ${CMAKE_PREFIX_PATH}/lib/libavcodec.so.61.3.100
             ${CMAKE_PREFIX_PATH}/lib/libavutil.so
@@ -1192,9 +1156,6 @@ function(orcaslicer_copy_sos target config postfix output_sos)
          DESTINATION ${_out_dir})
 
     set(${output_sos}
-        ${_out_dir}/libavformat.so
-        ${_out_dir}/libavformat.so.61
-        ${_out_dir}/libavformat.so.61.1.100
         ${_out_dir}/libavcodec.so
         ${_out_dir}/libavcodec.so.61
         ${_out_dir}/libavcodec.so.61.3.100
@@ -1324,8 +1285,6 @@ endif ()
 
 if (CMAKE_SYSTEM_NAME STREQUAL "Linux")
     set(LIBRARY_FILES
-    ${LIBDIR_BIN}/libavformat.so.61
-    ${LIBDIR_BIN}/libavformat.so.61.1.100
     ${LIBDIR_BIN}/libavcodec.so.61
     ${LIBDIR_BIN}/libavcodec.so.61.3.100
     ${LIBDIR_BIN}/libavutil.so.59

deps/CMakeLists.txt

@@ -156,7 +156,7 @@ if (NOT _is_multi AND NOT CMAKE_BUILD_TYPE)
 endif ()
 
 function(orcaslicer_add_cmake_project projectname)
-    cmake_parse_arguments(P_ARGS "FORWARD_CONFIG" "INSTALL_DIR;BUILD_COMMAND;INSTALL_COMMAND;SOURCE_DIR" "CMAKE_ARGS" ${ARGN})
+    cmake_parse_arguments(P_ARGS "FORWARD_CONFIG" "INSTALL_DIR;BUILD_COMMAND;INSTALL_COMMAND" "CMAKE_ARGS" ${ARGN})
 
     # MSVC is true for clang-cl as well, so the sub-build toolchain has to key on the
     # generator. A non-Visual-Studio superbuild passes its own generator down, and with
@@ -202,18 +202,12 @@ function(orcaslicer_add_cmake_project projectname)
       set(_build_j "-j${NPROC}")
     endif ()
 
-    set(_source_dir_arg "")
-    if (P_ARGS_SOURCE_DIR)
-        set(_source_dir_arg SOURCE_DIR ${P_ARGS_SOURCE_DIR})
-    endif ()
-
 if (NOT IS_CROSS_COMPILE OR NOT APPLE)
     ExternalProject_Add(
         dep_${projectname}
         EXCLUDE_FROM_ALL    ON
         INSTALL_DIR         ${DESTDIR}
         DOWNLOAD_DIR        ${DEP_DOWNLOAD_DIR}/${projectname}
-        ${_source_dir_arg}
         ${_gen}
         CMAKE_ARGS
             -DCMAKE_POLICY_VERSION_MINIMUM=3.5
@@ -246,14 +240,12 @@ if (NOT IS_CROSS_COMPILE OR NOT APPLE)
         # note for future devs: shared libs may actually create a size reduction
         # but orcaslicer_deps tends to get really funny regarding linking after that (notably boost)
         # so, as much as I would like to use that, it's not happening
-        if (NOT P_ARGS_SOURCE_DIR)
-            ExternalProject_Add_Step(dep_${projectname} free_download_space
-                    DEPENDEES download # do after download
-                    COMMENT "Freeing Space: Removing source archive"
-                    WORKING_DIRECTORY ${DEP_DOWNLOAD_DIR}
-                    COMMAND ${CMAKE_COMMAND} -E rm -rf ${projectname}
-            )
-        endif ()
+        ExternalProject_Add_Step(dep_${projectname} free_download_space
+                DEPENDEES download # do after download
+                COMMENT "Freeing Space: Removing source archive"
+                WORKING_DIRECTORY ${DEP_DOWNLOAD_DIR}
+                COMMAND ${CMAKE_COMMAND} -E rm -r ${projectname}
+        )
         ExternalProject_Add_Step(dep_${projectname} free_build_space
                 DEPENDEES install # do after install
                 COMMENT "Freeing Space: Removing source and build files"
@@ -267,7 +259,6 @@ else()
         EXCLUDE_FROM_ALL    ON
         INSTALL_DIR         ${DESTDIR}
         DOWNLOAD_DIR        ${DEP_DOWNLOAD_DIR}/${projectname}
-        ${_source_dir_arg}
         ${_gen}
         CMAKE_ARGS
             -DCMAKE_POLICY_VERSION_MINIMUM=3.5
@@ -395,6 +386,10 @@ include(libnoise/libnoise.cmake)
 
 include(Draco/Draco.cmake)
 
+include(FFMPEG/FFMPEG.cmake)
+include(Assimp/Assimp.cmake)
+
+
 # I *think* 1.1 is used for *just* md5 hashing?
 # 3.1 has everything in the right place, but the md5 funcs used are deprecated
 # a grep across the repo shows it is used for other things
@@ -405,12 +400,6 @@ if(NOT OPENSSL_FOUND)
     set(OPENSSL_PKG dep_OpenSSL)
 endif()
 
-include(FFMPEG/FFMPEG.cmake)
-include(Assimp/Assimp.cmake)
-
-include(DataChannel/DataChannel.cmake)
-set(DATACHANNEL_PKG dep_DataChannel)
-
 # we don't want to load a "wrong" openssl when loading curl
 # so, just don't even bother
 # ...i think this is how it works? change if wrong
@@ -484,7 +473,6 @@ set(_dep_list
     dep_wxInspector
     dep_FFMPEG
     dep_Assimp
-    ${DATACHANNEL_PKG}
     )
 
 if (MSVC)

deps/DataChannel/DataChannel.cmake

@@ -1,37 +0,0 @@
-# libdatachannel is the native ICE/DTLS/SCTP implementation used by the
-# GUI WebRTC camera controller. Keep the source revision fixed: the signaling
-# protocol is evolving independently of this transport dependency.
-#
-# It vendors plog, usrsctp and libjuice as git submodules, which a plain
-# GitHub tag tarball does not include. The flatpak sandbox has no network
-# access during the build, so there the manifest itself clones the repo
-# (submodules and all) into the dependency download directory before the
-# sandbox closes. ExternalProject_Add is pointed at that existing checkout
-# instead of being given its own network-dependent download method.
-if (FLATPAK)
-    set(_datachannel_source
-        SOURCE_DIR ${DEP_DOWNLOAD_DIR}/DataChannel
-    )
-else()
-    set(_datachannel_source
-        GIT_REPOSITORY https://github.com/paullouisageneau/libdatachannel.git
-        GIT_TAG v0.24.5
-        GIT_SHALLOW ON
-        GIT_SUBMODULES_RECURSE ON
-    )
-endif()
-
-orcaslicer_add_cmake_project(DataChannel
-    DEPENDS ${OPENSSL_PKG}
-    CMAKE_ARGS
-        -DNO_EXAMPLES=ON
-        -DNO_TESTS=ON
-        -DNO_WEBSOCKET=ON
-        -DNO_MEDIA=ON
-        -DUSE_NICE=OFF
-        -DUSE_SYSTEM_JUICE=OFF
-        -DUSE_SYSTEM_USRSCTP=OFF
-        -DOPENSSL_ROOT_DIR:PATH=${DESTDIR}
-        -DOPENSSL_USE_STATIC_LIBS=ON
-    ${_datachannel_source}
-)

deps/FFMPEG/FFMPEG.cmake

@@ -1,26 +1,14 @@
 set(_conf_cmd ./configure)
 
-set(_ffmpeg_depends)
-set(_ffmpeg_configure_command ${_conf_cmd})
-if (TARGET dep_OpenSSL)
-    set(_ffmpeg_depends DEPENDS dep_OpenSSL)
-    set(_ffmpeg_configure_command
-        ${CMAKE_COMMAND} -E env
-        "PKG_CONFIG_PATH=${DESTDIR}/lib/pkgconfig:$ENV{PKG_CONFIG_PATH}"
-        ${_conf_cmd}
-    )
-endif()
-
 if (MSVC)
     set(_source_dir "${CMAKE_BINARY_DIR}/dep_FFMPEG-prefix/src/dep_FFMPEG")
 
-    set(PREBUILD_URL_arm64 "https://github.com/Noisyfox/FFmpeg-Builds-Orca/releases/download/autobuild-2026-09-18-16-50/ffmpeg-n7.0.3-33-g887d4b4919-winarm64-orca-shared-7.0.zip")
-    set(PREBUILD_HASH_arm64 "da480cbb39680056de824c57ec4dc3bd577b479ebbc310ff1f9dc55cf014b4c1")
-    set(PREBUILD_URL_x64 "https://github.com/Noisyfox/FFmpeg-Builds-Orca/releases/download/autobuild-2026-09-18-16-50/ffmpeg-n7.0.3-33-g887d4b4919-win64-orca-shared-7.0.zip")
-    set(PREBUILD_HASH_x64 "85da19daf198f5548259d8aabb349db84997a3f6e6886d8d7764114add9c6dae")
+    set(PREBUILD_URL_arm64 "https://github.com/Noisyfox/FFmpeg-Builds-Orca/releases/download/autobuild-2026-07-17-14-28/ffmpeg-n7.0.3-31-g9b6ffd74b5-winarm64-orca-shared-7.0.zip")
+    set(PREBUILD_HASH_arm64 "12f4140279f2f8469885e1b5b2e8be9d788882914c21523cacd56989f3548054")
+    set(PREBUILD_URL_x64 "https://github.com/Noisyfox/FFmpeg-Builds-Orca/releases/download/autobuild-2026-07-17-14-28/ffmpeg-n7.0.3-31-g9b6ffd74b5-win64-orca-shared-7.0.zip")
+    set(PREBUILD_HASH_x64 "e65916020ddb9ef84b2666dfbcbfc9b1d67f69d15b4a66db53754637bf2d498c")
 
     ExternalProject_Add(dep_FFMPEG
-        ${_ffmpeg_depends}
         URL ${PREBUILD_URL_${DEPS_ARCH}}
         URL_HASH SHA256=${PREBUILD_HASH_${DEPS_ARCH}}
         DOWNLOAD_DIR ${DEP_DOWNLOAD_DIR}/FFMPEG
@@ -33,8 +21,6 @@ if (MSVC)
     )
 
 else ()
-    set(_openssl_cmd --enable-openssl)
-
     if (APPLE)
         set(_minos_cmd
             "--extra-cflags=-mmacosx-version-min=${DEP_OSX_TARGET}"
@@ -66,11 +52,10 @@ else ()
     endif()
 
     ExternalProject_Add(dep_FFMPEG
-        ${_ffmpeg_depends}
         URL https://github.com/FFmpeg/FFmpeg/archive/refs/tags/n7.0.3.tar.gz
         URL_HASH SHA256=DEEDCABE339165214A3637DF4C86A507AEF0D793CF8774FF68735F4737E8DDBC
         DOWNLOAD_DIR ${DEP_DOWNLOAD_DIR}/FFMPEG
-        CONFIGURE_COMMAND ${_ffmpeg_configure_command}
+        CONFIGURE_COMMAND ${_conf_cmd}
             ${_cross_cmd}
             ${_pic_cmd}
             ${_arch_cmd}
@@ -78,21 +63,20 @@ else ()
             "--prefix=${DESTDIR}"
             ${_link_cmd}
             ${_minos_cmd}
-            ${_openssl_cmd}
             --disable-doc
             --enable-small
             --disable-outdevs
             --disable-filters
             --enable-filter=*null*,afade,*fifo,*format,*resample,aeval,allrgb,allyuv,atempo,pan,*bars,color,*key,crop,draw*,eq*,framerate,*_qsv,*_vaapi,*v4l2*,hw*,scale,volume,test*
             --disable-protocols
-            --enable-protocol=file,fd,pipe,http,https,rtp,tcp,udp
+            --enable-protocol=file,fd,pipe,rtp,udp
             --disable-muxers
             --enable-muxer=rtp
             --disable-encoders
             --disable-decoders
             --enable-decoder=*aac*,h264*,mp3*,mjpeg,rv*
             --disable-demuxers
-            --enable-demuxer=h264,mp3,mov,mpjpeg,rtsp,sdp
+            --enable-demuxer=h264,mp3,mov
             --disable-zlib
             --disable-avdevice
         BUILD_IN_SOURCE ON

docs/HLSD/printer-agent.md

@@ -1,240 +0,0 @@
-# Printer agents
-
-Printer agents isolate printer-specific communication from the rest of OrcaSlicer. The GUI and
-`DeviceManager` operate on a shared set of printer operations and device state; a selected printer
-agent implements those operations for a particular printer ecosystem. The agent boundary allows
-Bambu, Moonraker-based printers, built-in integrations, and Python-provided integrations to use the
-same application workflow without making the GUI understand every printer protocol.
-
-The current boundary is an adapter boundary around the existing application contract. In particular,
-some request fields and message payloads still use the Bambu-shaped representation that existing
-`MachineObject` and `DeviceManager` code consumes. The printer agent is responsible for translating
-that representation into the protocol spoken by its printer. This is an intentional compatibility
-constraint of the current design; the interface is not yet a neutral printer protocol.
-
-The v1 dialect migration path is deliberately narrow. `DeviceManager` currently speaks the Bambu JSON
-dialect because that is the payload shape already used throughout the command and state workflow. The
-v1 `OrcaPrinterAgent` also accepts that Bambu dialect. Its transport path places the small translation
-needed for the target printer at `deliver_to_sink`, keeping the compatibility code at the edge rather
-than spreading it through `DeviceManager` or the agent interface.
-
-The eventual direction is for `DeviceManager` to produce an Orca JSON dialect. The Bambu agent will then
-own the translation from Orca JSON to Bambu's protocol, while `OrcaPrinterAgent` can forward the Orca
-payload directly to its sink. The v1 translation at `deliver_to_sink` can then be removed without
-changing `DeviceManager`, the command callers, or the rest of the agent workflow.
-
-## Components
-
-The system has four relevant layers:
-
-```text
-GUI / DeviceManager / MachineObject
-              |
-        NetworkAgent
-          /       \
- IPrinterAgent   ICloudServiceAgent
-      |                 |
- printer protocol   authentication and cloud services
-```
-
-### `DeviceManager` and `MachineObject`
-
-`DeviceManager` owns the application-facing printer workflow. It maintains `MachineObject` instances,
-updates their state, filters devices for the active printer agent, and initiates operations such as
-homing, temperature changes, printing, subscriptions, and camera playback.
-
-`MachineObject` remains the shared state model used by the GUI. It does not contain the implementation
-of a printer protocol. When a device is discovered or returned by a cloud query, the device is tagged
-with the active `printer_agent_id`. Device lists and selected-machine operations use that tag to avoid
-sending an operation through an agent that does not own the device.
-
-### `NetworkAgent`
-
-`NetworkAgent` is the façade used by the GUI and `DeviceManager`. It owns:
-
-- the currently selected `IPrinterAgent`;
-- the registered cloud-service instances, indexed by provider;
-- callbacks shared by the active printer agent and the application;
-- the forwarding methods for printer commands and cloud operations.
-
-There is one active printer agent for the currently selected printer preset. Switching the preset
-increments the machine-list generation, disconnects the old printer agent, removes its callbacks, and
-installs the newly selected agent. The façade then forwards printer operations to that agent.
-
-Cloud operations are selected separately using a provider key. `NetworkAgent` forwards a cloud request
-to the matching `ICloudServiceAgent`, and forwards cloud camera operations with a device ID. The
-printer agent receives a cloud-agent pointer through `set_cloud_agent()` when it is created, allowing
-printer communication to obtain cloud tokens without depending on a concrete cloud implementation.
-
-### `IPrinterAgent`
-
-`IPrinterAgent` is the printer-facing contract. It covers:
-
-- cloud-relay and direct-LAN message delivery;
-- LAN connection, discovery, binding, and certificates;
-- printer subscriptions and callbacks;
-- print operations;
-- filament synchronization;
-- camera capability and local camera URL reporting;
-- printer command methods.
-
-Concrete built-in implementations include the Bambu wrapper, the native Orca/Moonraker path, and
-other printer-agent implementations registered by the application. A printer agent may use either
-the cloud agent, a direct LAN connection, or both.
-
-### `ICloudServiceAgent`
-
-`ICloudServiceAgent` owns authentication and services provided by a cloud backend. It covers login
-state, tokens, user and printer lists, settings synchronization, model services, cloud messages, and
-cloud camera operations.
-
-Cloud camera operations are device-scoped:
-
-- `get_camera_url(dev_id, callback)` obtains a stream URL for one device;
-- `create_camera_signaling_channel(dev_id)` creates signaling for one device where the provider
-  supports it.
-
-This is separate from the local camera URL exposed by `IPrinterAgent`, which is currently scoped to
-the active printer agent because a normal LAN agent represents one physical printer connection.
-
-## Agent registration and selection
-
-`NetworkAgentFactory` maintains the printer-agent registry. Each registry entry contains an agent ID,
-a display name, and a factory function. Built-in agents register during application initialization.
-Python printer-agent capabilities register dynamically and contribute an agent ID and factory entry.
-
-The selected printer preset contains the printer-agent choice. If no explicit choice is stored, the
-application preserves the existing default behavior: Bambu presets select the Bambu agent and other
-presets select the native Orca agent. When a preset is changed, `GUI_App` resolves the effective agent
-ID, obtains the corresponding cloud agent, creates the printer agent through the registry, and installs
-it in `NetworkAgent`.
-
-The registry rejects conflicting agent IDs. This matters for Python plugins because an agent ID is the
-stable identity used by presets and device ownership; two enabled plugin capabilities must not claim
-the same ID.
-
-## Message and command flow
-
-There are two low-level message paths:
-
-- `send_message()` publishes a command through the printer's cloud relay;
-- `send_message_to_printer()` sends a command directly to the printer over the LAN path.
-
-Both paths accept a JSON string, quality-of-service and flag values, and return the existing network
-status code domain. The agent owns the conversion from that JSON contract to its native transport.
-
-The typed `command_*` methods are the application-facing convenience layer. The five generic defaults
-currently implemented by `IPrinterAgent` construct the existing JSON dialect and route through the
-same message path:
-
-| Method | Default operation |
-| --- | --- |
-| `command_xyz_abs()` | Send `G90` for absolute positioning |
-| `command_auto_leveling()` | Send `G29` for bed leveling |
-| `command_go_home()` | Use the supported homing operation or send `G28` |
-| `command_set_bed()` | Use the supported bed control or send `M140` |
-| `command_set_nozzle()` | Send `M104` for nozzle temperature |
-
-These are compatibility defaults for common printer workflows, not a guarantee that every firmware
-implements every command identically. An agent can override a method when its protocol needs another
-operation. For example, a Klipper configuration may use `BED_MESH_CALIBRATE` instead of `G29`.
-
-The remaining common command methods default to `ORCA_NETWORK_ERR_CMD_NOT_SUPPORTED` because their
-existing behavior is vendor-specific or has no portable implementation:
-
-- AMS RFID refresh;
-- AMS calibration;
-- AMS tray selection;
-- camera start;
-- axis control.
-
-The methods remain on the common interface so an agent that supports them can override them explicitly.
-`sequence_id` remains part of the command contract because `DeviceManager` creates and tracks it as
-the command ID.
-
-## Device ownership and stale responses
-
-Printer-agent ownership is represented by `printer_agent_id` on device records and `MachineObject`
-instances. The active agent ID is attached when a device is discovered, returned by a cloud list, or
-reused after a preset switch. Local-machine configuration also persists the agent ID so a saved LAN
-device is not silently reused by an unrelated agent.
-
-Cloud printer-list responses carry three pieces of request context added by `NetworkAgent`:
-
-```text
-provider   cloud provider used for the request
-agent_id   active printer agent when the request was made
-generation machine-list generation when the request was made
-```
-
-`DeviceManager` accepts the response only when those values still match the current provider, active
-agent, and generation. This prevents a slow response from the previous preset or provider from
-repopulating the current device list.
-
-The provider mapping is currently selected by `GUI_App`: the Bambu agent maps to the Bambu cloud
-provider and other agents map to the Orca cloud provider. The generation check protects that existing
-selection from races; it does not make cloud-provider ownership intrinsic to an agent. Cloud-printer
-ownership and the broader Orca cloud services are therefore still separate architectural concerns.
-
-## Python printer agents
-
-`PrinterAgentPluginCapability` implements `IPrinterAgent` directly. The live capability object is
-registered with `NetworkAgentFactory` and handed out as the printer agent when its agent ID is selected.
-The plugin receives the selected `ICloudServiceAgent` through `set_cloud_agent()` just like a built-in
-printer agent.
-
-Python plugins must implement the core communication and lifecycle methods required by the interface,
-including agent metadata, printer connection, discovery callbacks, and the two message-send methods.
-Methods that are meaningful only to a particular printer are optional overrides where the C++ base
-class provides a default.
-
-All ten `command_*` methods are available in the Python binding and in the trampoline. Their override
-status is intentionally optional:
-
-- the five generic commands use the C++ default when Python does not override them;
-- the five vendor-specific commands return `NOT_SUPPORTED` unless Python supplies an implementation;
-- a Python implementation can replace either behavior for its own protocol.
-
-The Python camera binding exposes HTTP, HTTPS, RTSP, and HTTP-snapshot modes. WebRTC remains a
-built-in C++ camera mode, but is not exposed as a Python mode because the current Python capability
-does not provide the corresponding cloud signaling-channel contract.
-
-## Camera playback boundary
-
-The camera stream mode describes how a stream is obtained; it does not by itself define ownership of
-the wxWidgets view that renders it. `MediaPlayCtrl` selects and tears down the active backend, while
-the wx parent owns the child window or renderer. This is important because a web view, native media
-control, and frame-based/WebRTC renderer have different wx window-lifetime requirements.
-
-Cloud URL and signaling requests are routed through `NetworkAgent` to the cloud provider selected for
-the device. Local URL requests are routed to the active printer agent. The distinction keeps cloud
-account services device-scoped while preserving the current one-LAN-agent/one-printer model.
-
-## Compatibility constraints
-
-The printer-agent boundary intentionally preserves several existing application contracts:
-
-- Bambu-shaped JSON is still the shared command representation;
-- existing network status codes are reused, with Orca-specific unsupported/capability errors added
-  in the Orca-reserved range;
-- `MachineObject` remains the shared device-state model;
-- preset and local-machine data retain compatibility with the existing agent-selection behavior;
-- Python plugins use the existing capability and pybind11 registration system.
-
-The agent abstraction is therefore responsible for containing vendor differences, not for pretending
-that all vendor protocols are identical. The planned Orca JSON dialect is the protocol-neutral command
-model for the `DeviceManager`/agent boundary. Once it is introduced, Bambu-specific translation remains
-inside the Bambu agent and the Orca agent's v1 sink adapter can be removed as a self-contained cleanup.
-
-## Main implementation locations
-
-- [`IPrinterAgent`](../../src/slic3r/Utils/IPrinterAgent.hpp) — printer-agent contract and generic command defaults
-- [`ICloudServiceAgent`](../../src/slic3r/Utils/ICloudServiceAgent.hpp) — cloud service and per-device
-  cloud camera contract
-- [`NetworkAgent`](../../src/slic3r/Utils/NetworkAgent.hpp) — façade and dispatch between active agents
-- [`NetworkAgentFactory`](../../src/slic3r/Utils/NetworkAgentFactory.hpp) — built-in and Python agent registry
-- [`DeviceManager`](../../src/slic3r/GUI/DeviceCore/DevManager.cpp) — device ownership, filtering, and
-  stale-response checks
-- [`PrinterAgentPluginCapability`](../../src/slic3r/plugin/pluginTypes/printerAgent/PrinterAgentPluginCapability.cpp)
-  — Python bindings
-- [`MediaPlayCtrl`](../../src/slic3r/GUI/MediaPlayCtrl.cpp) — camera backend selection and playback lifecycle

resources/profiles/BBL/filament/Bambu ABS @BBL A1 0.2 nozzle.json

@@ -1,41 +1,41 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL A1 0.2 nozzle",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_08",
-	"instantiation": "true",
-	"fan_max_speed": [
-		"20"
-	],
-	"filament_long_retractions_when_cut": [
-		"1"
-	],
-	"filament_max_volumetric_speed": [
-		"2"
-	],
-	"filament_retraction_distances_when_cut": [
-		"18"
-	],
-	"hot_plate_temp": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"100"
-	],
-	"reduce_fan_stop_start_freq": [
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"textured_plate_temp": [
-		"100"
-	],
-	"textured_plate_temp_initial_layer": [
-		"100"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 0.2 nozzle"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS @BBL A1 0.2 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_08",
+    "instantiation": "true",
+    "fan_max_speed": [
+        "20"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "hot_plate_temp": [
+        "100"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "100"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "textured_plate_temp": [
+        "100"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "100"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 0.2 nozzle"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL A1.json

@@ -1,43 +1,46 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL A1",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_07",
-	"instantiation": "true",
-	"fan_max_speed": [
-		"20"
-	],
-	"filament_long_retractions_when_cut": [
-		"1"
-	],
-	"filament_max_volumetric_speed": [
-		"16"
-	],
-	"filament_retraction_distances_when_cut": [
-		"18"
-	],
-	"hot_plate_temp": [
-		"100"
-	],
-	"hot_plate_temp_initial_layer": [
-		"100"
-	],
-	"reduce_fan_stop_start_freq": [
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"textured_plate_temp": [
-		"100"
-	],
-	"textured_plate_temp_initial_layer": [
-		"100"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS @BBL A1",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_07",
+    "instantiation": "true",
+    "fan_max_speed": [
+        "20"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "16"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "filament_retraction_length": [
+        "0.4"
+    ],
+    "hot_plate_temp": [
+        "100"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "100"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "textured_plate_temp": [
+        "100"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "100"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 0.4 nozzle",
+        "Bambu Lab A1 0.6 nozzle",
+        "Bambu Lab A1 0.8 nozzle"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL H2C 0.2 nozzle.json

@@ -1,210 +1,113 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL H2C 0.2 nozzle",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_23",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"65"
-	],
-	"counter_coef_2": [
-		"0.0124"
-	],
-	"counter_coef_3": [
-		"0.0241"
-	],
-	"counter_limit_max": [
-		"0.3341"
-	],
-	"counter_limit_min": [
-		"0.0241"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"fan_min_speed": [
-		"40"
-	],
-	"filament_change_length": [
-		"4"
-	],
-	"filament_cooling_before_tower": [
-		"10",
-		"10"
-	],
-	"filament_max_volumetric_speed": [
-		"2",
-		"2"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"230",
-		"230"
-	],
-	"filament_prime_volume": [
-		"30"
-	],
-	"filament_prime_volume_nc": [
-		"30"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"1",
-		"1"
-	],
-	"first_x_layer_fan_speed": [
-		"0"
-	],
-	"filament_change_length_nc": [
-		"4"
-	],
-	"hole_coef_2": [
-		"-0.0008"
-	],
-	"hole_coef_3": [
-		"0.1319"
-	],
-	"hole_limit_max": [
-		"0.1319"
-	],
-	"hole_limit_min": [
-		"0.1119"
-	],
-	"filament_preheat_temperature_delta": [
-		"20",
-		"20"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"75"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS @BBL H2C 0.2 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_23",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "fan_min_speed": [
+        "40"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "2",
+        "2"
+    ],
+    "filament_pre_cooling_temperature_nc": [
+        "230",
+        "230"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_prime_volume_nc": [
+        "30"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_ramming_travel_time_nc": [
+        "1",
+        "1"
+    ],
+    "first_x_layer_fan_speed": [
+        "0"
+    ],
+    "filament_change_length_nc": [
+        "4"
+    ],
+    "hole_coef_2": [
+        "-0.0008"
+    ],
+    "hole_coef_3": [
+        "0.1319"
+    ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
+    "hole_limit_min": [
+        "0.1119"
+    ],
+    "filament_preheat_temperature_delta": [
+        "20",
+        "20"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "temperature_vitrification": [
+        "75"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2C 0.2 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL H2C 0.6 nozzle.json

@@ -1,204 +1,141 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL H2C 0.6 nozzle",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_34",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"65"
-	],
-	"counter_coef_2": [
-		"0.0124"
-	],
-	"counter_coef_3": [
-		"0.0241"
-	],
-	"counter_limit_max": [
-		"0.3341"
-	],
-	"counter_limit_min": [
-		"0.0241"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_change_length": [
-		"4"
-	],
-	"filament_cooling_before_tower": [
-		"10",
-		"10"
-	],
-	"filament_flow_ratio": [
-		"0.98",
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"25",
-		"30"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"230",
-		"230"
-	],
-	"filament_prime_volume": [
-		"30"
-	],
-	"filament_prime_volume_nc": [
-		"30"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"1",
-		"1"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"first_x_layer_fan_speed": [
-		"0"
-	],
-	"filament_change_length_nc": [
-		"4"
-	],
-	"hole_coef_2": [
-		"-0.0008"
-	],
-	"hole_coef_3": [
-		"0.1319"
-	],
-	"hole_limit_max": [
-		"0.1319"
-	],
-	"hole_limit_min": [
-		"0.1119"
-	],
-	"filament_preheat_temperature_delta": [
-		"20",
-		"20"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"75"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
+    "type": "filament",
+    "name": "Bambu ABS @BBL H2C 0.6 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_34",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_flow_ratio": [
+        "0.98",
+        "0.98",
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "25",
+        "30",
+        "25"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_prime_volume_nc": [
+        "30"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "filament_pre_cooling_temperature_nc": [
+        "230",
+        "230",
+        "230"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0"
+    ],
+    "filament_ramming_travel_time_nc": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "filament_change_length_nc": [
+        "4"
+    ],
+    "first_x_layer_fan_speed": [
+        "0"
+    ],
+    "hole_coef_2": [
+        "-0.0008"
+    ],
+    "hole_coef_3": [
+        "0.1319"
+    ],
+    "hole_limit_min": [
+        "0.1119"
+    ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
+    "filament_preheat_temperature_delta": [
+        "20",
+        "20",
+        "20"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260",
+        "260"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20"
+    ],
+    "temperature_vitrification": [
+        "75"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2C 0.6 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL H2C 0.8 nozzle.json

@@ -1,204 +1,127 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL H2C 0.8 nozzle",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_35",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"65"
-	],
-	"counter_coef_2": [
-		"0.0124"
-	],
-	"counter_coef_3": [
-		"0.0241"
-	],
-	"counter_limit_max": [
-		"0.3341"
-	],
-	"counter_limit_min": [
-		"0.0241"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_change_length": [
-		"4"
-	],
-	"filament_cooling_before_tower": [
-		"10",
-		"10"
-	],
-	"filament_flow_ratio": [
-		"0.98",
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"25",
-		"30"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"230",
-		"230"
-	],
-	"filament_prime_volume": [
-		"30"
-	],
-	"filament_prime_volume_nc": [
-		"30"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"1",
-		"1"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"first_x_layer_fan_speed": [
-		"0"
-	],
-	"filament_change_length_nc": [
-		"4"
-	],
-	"hole_coef_2": [
-		"-0.0008"
-	],
-	"hole_coef_3": [
-		"0.1319"
-	],
-	"hole_limit_max": [
-		"0.1319"
-	],
-	"hole_limit_min": [
-		"0.1119"
-	],
-	"filament_preheat_temperature_delta": [
-		"20",
-		"20"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"75"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS @BBL H2C 0.8 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_35",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_flow_ratio": [
+        "0.98",
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "25",
+        "30"
+    ],
+    "filament_pre_cooling_temperature_nc": [
+        "230",
+        "230"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_prime_volume_nc": [
+        "30"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_ramming_travel_time_nc": [
+        "1",
+        "1"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "first_x_layer_fan_speed": [
+        "0"
+    ],
+    "filament_change_length_nc": [
+        "4"
+    ],
+    "hole_coef_2": [
+        "-0.0008"
+    ],
+    "hole_coef_3": [
+        "0.1319"
+    ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
+    "hole_limit_min": [
+        "0.1119"
+    ],
+    "filament_preheat_temperature_delta": [
+        "20",
+        "20"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "temperature_vitrification": [
+        "75"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2C 0.8 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL H2C.json

@@ -1,204 +1,141 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL H2C",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_22",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"65"
-	],
-	"counter_coef_2": [
-		"0.0124"
-	],
-	"counter_coef_3": [
-		"0.0241"
-	],
-	"counter_limit_max": [
-		"0.3341"
-	],
-	"counter_limit_min": [
-		"0.0241"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_change_length": [
-		"4"
-	],
-	"filament_cooling_before_tower": [
-		"10",
-		"10"
-	],
-	"filament_flow_ratio": [
-		"0.98",
-		"0.98"
-	],
-	"filament_max_volumetric_speed": [
-		"20",
-		"30"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"230",
-		"230"
-	],
-	"filament_prime_volume": [
-		"30"
-	],
-	"filament_prime_volume_nc": [
-		"30"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"1",
-		"1"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.6"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"first_x_layer_fan_speed": [
-		"0"
-	],
-	"filament_change_length_nc": [
-		"4"
-	],
-	"hole_coef_2": [
-		"-0.0008"
-	],
-	"hole_coef_3": [
-		"0.1319"
-	],
-	"hole_limit_max": [
-		"0.1319"
-	],
-	"hole_limit_min": [
-		"0.1119"
-	],
-	"filament_preheat_temperature_delta": [
-		"20",
-		"20"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"75"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
+    "type": "filament",
+    "name": "Bambu ABS @BBL H2C",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_22",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_flow_ratio": [
+        "0.98",
+        "0.98",
+        "0.98"
+    ],
+    "filament_max_volumetric_speed": [
+        "20",
+        "30",
+        "20"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.6",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_prime_volume_nc": [
+        "30"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "filament_pre_cooling_temperature_nc": [
+        "230",
+        "230",
+        "230"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0"
+    ],
+    "filament_ramming_travel_time_nc": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "filament_change_length_nc": [
+        "4"
+    ],
+    "first_x_layer_fan_speed": [
+        "0"
+    ],
+    "hole_coef_2": [
+        "-0.0008"
+    ],
+    "hole_coef_3": [
+        "0.1319"
+    ],
+    "hole_limit_min": [
+        "0.1119"
+    ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
+    "filament_preheat_temperature_delta": [
+        "20",
+        "20",
+        "20"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260",
+        "260"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20"
+    ],
+    "temperature_vitrification": [
+        "75"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2C 0.4 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.2 nozzle.json

@@ -1,134 +1,83 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL H2D 0.2 nozzle",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_12",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"65"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"2",
-		"2"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS @BBL H2D 0.2 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_12",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "2",
+        "2"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "hole_coef_2": [
+        "-0.0008"
+    ],
+    "hole_coef_3": [
+        "0.1319"
+    ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
+    "hole_limit_min": [
+        "0.1119"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2D 0.2 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.6 nozzle.json

@@ -1,138 +1,109 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL H2D 0.6 nozzle",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_29",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"65"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"25",
-		"35"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_extruder_id": [
-		"1",
-		"1"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS @BBL H2D 0.6 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_29",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "25",
+        "35",
+        "25"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "hole_coef_2": [
+        "-0.0008"
+    ],
+    "hole_coef_3": [
+        "0.1319"
+    ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
+    "hole_limit_min": [
+        "0.1119"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260",
+        "260"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2D 0.6 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.8 nozzle.json

@@ -1,134 +1,99 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL H2D 0.8 nozzle",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_13",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"65"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"25",
-		"35"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"260",
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS @BBL H2D 0.8 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_13",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "25",
+        "35"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "hole_coef_2": [
+        "-0.0008"
+    ],
+    "hole_coef_3": [
+        "0.1319"
+    ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
+    "hole_limit_min": [
+        "0.1119"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "nozzle_temperature": [
+        "260",
+        "260"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2D 0.8 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL H2D.json

@@ -1,134 +1,109 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL H2D",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_11",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"65"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"20",
-		"35"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS @BBL H2D",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_11",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "20",
+        "35",
+        "20"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "hole_coef_2": [
+        "-0.0008"
+    ],
+    "hole_coef_3": [
+        "0.1319"
+    ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
+    "hole_limit_min": [
+        "0.1119"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260",
+        "260"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2D 0.4 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL H2DP 0.2 nozzle.json

@@ -1,134 +1,53 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL H2DP 0.2 nozzle",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_17",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"65"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"2",
-		"2"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D Pro 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS @BBL H2DP 0.2 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_17",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "2",
+        "2"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2D Pro 0.2 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL H2DP 0.6 nozzle.json

@@ -1,134 +1,69 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL H2DP 0.6 nozzle",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_31",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"65"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"25",
-		"35"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D Pro 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
+    "type": "filament",
+    "name": "Bambu ABS @BBL H2DP 0.6 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_31",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "25",
+        "35"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2D Pro 0.6 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL H2DP 0.8 nozzle.json

@@ -1,134 +1,69 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL H2DP 0.8 nozzle",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_18",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"65"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"25",
-		"35"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"260",
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D Pro 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS @BBL H2DP 0.8 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_18",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "25",
+        "35"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "nozzle_temperature": [
+        "260",
+        "260"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2D Pro 0.8 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL H2DP.json

@@ -1,134 +1,69 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL H2DP",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_16",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"65"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"20",
-		"30"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D Pro 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
+    "type": "filament",
+    "name": "Bambu ABS @BBL H2DP",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_16",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "20",
+        "30"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2D Pro 0.4 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL H2S 0.2 nozzle.json

@@ -1,143 +1,104 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL H2S 0.2 nozzle",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_25",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"60"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"fan_min_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"3",
-		"3"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"2",
-		"2"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2S 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS @BBL H2S 0.2 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_25",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "60"
+    ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "fan_min_speed": [
+        "40"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_flush_volumetric_speed": [
+        "3",
+        "3"
+    ],
+    "filament_max_volumetric_speed": [
+        "2",
+        "2"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "hole_coef_2": [
+        "-0.0008"
+    ],
+    "hole_coef_3": [
+        "0.1319"
+    ],
+    "hole_limit_min": [
+        "0.1119"
+    ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "pre_start_fan_time": [
+        "2"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2S 0.2 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL H2S 0.6 nozzle.json

@@ -1,140 +1,125 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL H2S 0.6 nozzle",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_33",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"60"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"25",
-		"35"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2S 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
+    "type": "filament",
+    "name": "Bambu ABS @BBL H2S 0.6 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_33",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "60"
+    ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "25",
+        "35",
+        "25"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0"
+    ],
+    "hole_coef_2": [
+        "-0.0008"
+    ],
+    "hole_coef_3": [
+        "0.1319"
+    ],
+    "hole_limit_min": [
+        "0.1119"
+    ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260",
+        "260"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "pre_start_fan_time": [
+        "2"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0",
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2S 0.6 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL H2S 0.8 nozzle.json

@@ -1,140 +1,113 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL H2S 0.8 nozzle",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_32",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"60"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"25",
-		"35"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2S 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS @BBL H2S 0.8 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_32",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "60"
+    ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "25",
+        "35"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "hole_coef_2": [
+        "-0.0008"
+    ],
+    "hole_coef_3": [
+        "0.1319"
+    ],
+    "hole_limit_min": [
+        "0.1119"
+    ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "pre_start_fan_time": [
+        "2"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2S 0.8 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL H2S.json

@@ -1,140 +1,125 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL H2S",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_24",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"60"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"20",
-		"35"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2S 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
+    "type": "filament",
+    "name": "Bambu ABS @BBL H2S",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_24",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "60"
+    ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "20",
+        "35",
+        "20"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0"
+    ],
+    "hole_coef_2": [
+        "-0.0008"
+    ],
+    "hole_coef_3": [
+        "0.1319"
+    ],
+    "hole_limit_min": [
+        "0.1119"
+    ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260",
+        "260"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "pre_start_fan_time": [
+        "2"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0",
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2S 0.4 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL P1S 0.4 nozzle.json

@@ -0,0 +1,72 @@
+{
+    "type": "filament",
+    "name": "Bambu ABS @BBL P1S 0.4 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_38",
+    "instantiation": "true",
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_deretraction_speed": [
+        "nil",
+        "40"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1",
+        "nil"
+    ],
+    "filament_max_volumetric_speed": [
+        "16",
+        "25"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18",
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_retraction_speed": [
+        "nil",
+        "40"
+    ],
+    "filament_z_hop": [
+        "nil",
+        "0.6"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P1S 0.4 nozzle"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL P1S 0.6 nozzle.json

@@ -0,0 +1,72 @@
+{
+    "type": "filament",
+    "name": "Bambu ABS @BBL P1S 0.6 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_39",
+    "instantiation": "true",
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_deretraction_speed": [
+        "nil",
+        "40"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1",
+        "nil"
+    ],
+    "filament_max_volumetric_speed": [
+        "16",
+        "25"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18",
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_retraction_speed": [
+        "nil",
+        "40"
+    ],
+    "filament_z_hop": [
+        "nil",
+        "0.6"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P1S 0.6 nozzle"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL P2S 0.2 nozzle.json

@@ -1,174 +1,93 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL P2S 0.2 nozzle",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_14",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"65"
-	],
-	"fan_min_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"3",
-		"3"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"2",
-		"2"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P2S 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS @BBL P2S 0.2 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_14",
+    "instantiation": "true",
+    "activate_air_filtration": [
+        "0"
+    ],
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
+    "fan_min_speed": [
+        "40"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_flush_volumetric_speed": [
+        "3",
+        "3"
+    ],
+    "filament_max_volumetric_speed": [
+        "2",
+        "2"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "10",
+        "10"
+    ],
+    "hole_coef_2": [
+        "-0.0008"
+    ],
+    "hole_coef_3": [
+        "0.1319"
+    ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
+    "hole_limit_min": [
+        "0.1119"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P2S 0.2 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL P2S 0.6 nozzle.json

@@ -1,174 +1,105 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL P2S 0.6 nozzle",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_36",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"65"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"16",
-		"35"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P2S 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
+    "type": "filament",
+    "name": "Bambu ABS @BBL P2S 0.6 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_36",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "16",
+        "35",
+        "16"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4",
+        "0.4"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0"
+    ],
+    "hole_coef_2": [
+        "-0.0008"
+    ],
+    "hole_coef_3": [
+        "0.1319"
+    ],
+    "hole_limit_min": [
+        "0.1119"
+    ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0",
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P2S 0.6 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL P2S 0.8 nozzle.json

@@ -1,177 +1,93 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL P2S 0.8 nozzle",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_15",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"65"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"18",
-		"35"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"260",
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P2S 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS @BBL P2S 0.8 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_15",
+    "instantiation": "true",
+    "activate_air_filtration": [
+        "0"
+    ],
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "18",
+        "35"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "10",
+        "10"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "hole_coef_2": [
+        "-0.0008"
+    ],
+    "hole_coef_3": [
+        "0.1319"
+    ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
+    "hole_limit_min": [
+        "0.1119"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "260",
+        "260"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P2S 0.8 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL P2S.json

@@ -1,174 +1,108 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL P2S",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_10",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"65"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"16",
-		"25"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P2S 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
+    "type": "filament",
+    "name": "Bambu ABS @BBL P2S",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_10",
+    "instantiation": "true",
+    "activate_air_filtration": [
+        "0"
+    ],
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "16",
+        "25",
+        "16"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4",
+        "0.4"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0"
+    ],
+    "hole_coef_2": [
+        "-0.0008"
+    ],
+    "hole_coef_3": [
+        "0.1319"
+    ],
+    "hole_limit_min": [
+        "0.1119"
+    ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0",
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P2S 0.4 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json

@@ -1,127 +1,58 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL X1C 0.2 nozzle",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_00",
-	"instantiation": "true",
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_long_retractions_when_cut": [
-		"1",
-		"1"
-	],
-	"filament_max_volumetric_speed": [
-		"2",
-		"2"
-	],
-	"filament_retraction_distances_when_cut": [
-		"18",
-		"18"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1 Carbon 0.2 nozzle",
-		"Bambu Lab X1 0.2 nozzle",
-		"Bambu Lab P1S 0.2 nozzle"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS @BBL X1C 0.2 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_00",
+    "instantiation": "true",
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1",
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "2",
+        "2"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18",
+        "18"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.2 nozzle",
+        "Bambu Lab X1 0.2 nozzle",
+        "Bambu Lab P1S 0.2 nozzle"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.6 nozzle.json

@@ -0,0 +1,64 @@
+{
+    "type": "filament",
+    "name": "Bambu ABS @BBL X1C 0.6 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_40",
+    "instantiation": "true",
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1",
+        "nil"
+    ],
+    "filament_max_volumetric_speed": [
+        "16",
+        "25"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18",
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.8"
+    ],
+    "filament_z_hop": [
+        "nil",
+        "0.6"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.6 nozzle"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json

@@ -1,130 +1,58 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL X1C 0.8 nozzle",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_01",
-	"instantiation": "true",
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_long_retractions_when_cut": [
-		"1",
-		"1"
-	],
-	"filament_max_volumetric_speed": [
-		"18",
-		"18"
-	],
-	"filament_retraction_distances_when_cut": [
-		"18",
-		"18"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"260",
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab P1S 0.8 nozzle"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS @BBL X1C 0.8 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_01",
+    "instantiation": "true",
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1",
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "18",
+        "18"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18",
+        "18"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "nil"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "260",
+        "260"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab P1S 0.8 nozzle"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json

@@ -1,130 +1,74 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL X1C",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00",
-	"instantiation": "true",
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_long_retractions_when_cut": [
-		"1",
-		"1"
-	],
-	"filament_max_volumetric_speed": [
-		"16",
-		"16"
-	],
-	"filament_retraction_distances_when_cut": [
-		"18",
-		"18"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS @BBL X1C",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00",
+    "instantiation": "true",
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_deretraction_speed": [
+        "nil",
+        "40"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1",
+        "nil"
+    ],
+    "filament_max_volumetric_speed": [
+        "16",
+        "25"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18",
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_retraction_speed": [
+        "nil",
+        "40"
+    ],
+    "filament_z_hop": [
+        "nil",
+        "0.6"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab X1 0.6 nozzle"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL X1E 0.2 nozzle.json

@@ -1,125 +1,56 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL X1E 0.2 nozzle",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_05",
-	"instantiation": "true",
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"1",
-		"1"
-	],
-	"filament_max_volumetric_speed": [
-		"2",
-		"2"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"18",
-		"18"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1E 0.2 nozzle"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS @BBL X1E 0.2 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_05",
+    "instantiation": "true",
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1",
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "2",
+        "2"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18",
+        "18"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X1E 0.2 nozzle"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL X1E 0.8 nozzle.json

@@ -1,128 +1,56 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL X1E 0.8 nozzle",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_06",
-	"instantiation": "true",
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"1",
-		"1"
-	],
-	"filament_max_volumetric_speed": [
-		"18",
-		"18"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"18",
-		"18"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"260",
-		"260"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1E 0.8 nozzle"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS @BBL X1E 0.8 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_06",
+    "instantiation": "true",
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1",
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "18",
+        "18"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18",
+        "18"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "nil"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "260",
+        "260"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X1E 0.8 nozzle"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL X1E.json

@@ -1,126 +1,61 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL X1E",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_04",
-	"instantiation": "true",
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"1",
-		"1"
-	],
-	"filament_max_volumetric_speed": [
-		"16",
-		"16"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"18",
-		"18"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS @BBL X1E",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_04",
+    "instantiation": "true",
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1",
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "16",
+        "16"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18",
+        "18"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "nil"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X1E 0.4 nozzle",
+        "Bambu Lab X1E 0.6 nozzle"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.2 nozzle.json

@@ -1,299 +1,134 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL X2D 0.2 nozzle",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_20",
-	"instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_cooling_before_tower": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow",
-		"Bowden Standard",
-		"Bowden High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"3",
-		"3",
-		"3",
-		"3"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50",
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30",
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_bridge_speed": [
-		"25",
-		"25",
-		"25",
-		"25"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14",
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"nil",
-		"Spiral Lift",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"chamber_temperatures": [
-		"65"
-	],
-	"counter_coef_2": [
-		"0.0124"
-	],
-	"counter_coef_3": [
-		"0.0241"
-	],
-	"counter_limit_max": [
-		"0.3341"
-	],
-	"counter_limit_min": [
-		"0.0241"
-	],
-	"fan_min_speed": [
-		"80"
-	],
-	"filament_extruder_compatibility": [
-		"24"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95",
-		"0.95",
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"2",
-		"2",
-		"2",
-		"2"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_tower_interface_print_temp": [
-		"270"
-	],
-	"hole_coef_2": [
-		"-0.0008"
-	],
-	"hole_coef_3": [
-		"0.1319"
-	],
-	"hole_limit_max": [
-		"0.1319"
-	],
-	"hole_limit_min": [
-		"0.1119"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270",
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260",
-		"260",
-		"260"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"compatible_printers": [
-		"Bambu Lab X2D 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS @BBL X2D 0.2 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_20",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
+    "fan_min_speed": [
+        "80"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_extruder_compatibility": [
+        "24"
+    ],
+    "filament_flow_ratio": [
+        "0.95",
+        "0.95",
+        "0.95",
+        "0.95"
+    ],
+    "filament_flush_volumetric_speed": [
+        "3",
+        "3",
+        "3",
+        "3"
+    ],
+    "filament_max_volumetric_speed": [
+        "2",
+        "2",
+        "2",
+        "2"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0",
+        "0"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_tower_interface_print_temp": [
+        "270"
+    ],
+    "filament_wipe": [
+        "1",
+        "nil",
+        "1",
+        "nil"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "nil",
+        "1",
+        "nil"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "nil",
+        "Spiral Lift",
+        "nil"
+    ],
+    "hole_coef_2": [
+        "-0.0008"
+    ],
+    "hole_coef_3": [
+        "0.1319"
+    ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
+    "hole_limit_min": [
+        "0.1119"
+    ],
+    "include": [
+        "fdm_filament_template_direct_bowden"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260",
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "3",
+        "3",
+        "4",
+        "4"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X2D 0.2 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.4 nozzle.json

@@ -1,299 +1,163 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL X2D 0.4 nozzle",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_09",
-	"instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_cooling_before_tower": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow",
-		"Bowden Standard",
-		"Bowden High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50",
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30",
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_bridge_speed": [
-		"25",
-		"25",
-		"25",
-		"25"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14",
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift",
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"chamber_temperatures": [
-		"65"
-	],
-	"counter_coef_2": [
-		"0.0124"
-	],
-	"counter_coef_3": [
-		"0.0241"
-	],
-	"counter_limit_max": [
-		"0.3341"
-	],
-	"counter_limit_min": [
-		"0.0241"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_extruder_compatibility": [
-		"24"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95",
-		"0.95",
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"16",
-		"25",
-		"16",
-		"18"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_tower_interface_print_temp": [
-		"270"
-	],
-	"hole_coef_2": [
-		"-0.0008"
-	],
-	"hole_coef_3": [
-		"0.1319"
-	],
-	"hole_limit_max": [
-		"0.1319"
-	],
-	"hole_limit_min": [
-		"0.1119"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270",
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260",
-		"260",
-		"260"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"compatible_printers": [
-		"Bambu Lab X2D 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
+    "type": "filament",
+    "name": "Bambu ABS @BBL X2D 0.4 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_09",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_extruder_compatibility": [
+        "24"
+    ],
+    "filament_flow_ratio": [
+        "0.95",
+        "0.95",
+        "0.95",
+        "0.95",
+        "0.95",
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "16",
+        "25",
+        "16",
+        "16",
+        "18",
+        "16"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0",
+        "0",
+        "0",
+        "0"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "10",
+        "10",
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4",
+        "0.4",
+        "nil",
+        "nil",
+        "nil"
+    ],
+    "filament_tower_interface_print_temp": [
+        "270"
+    ],
+    "filament_wipe": [
+        "1",
+        "1",
+        "1",
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1",
+        "1",
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "hole_coef_2": [
+        "-0.0008"
+    ],
+    "hole_coef_3": [
+        "0.1319"
+    ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
+    "hole_limit_min": [
+        "0.1119"
+    ],
+    "include": [
+        "fdm_filament_template_direct_bowden_e3d"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270",
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260",
+        "260",
+        "260",
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "3",
+        "3",
+        "3",
+        "4",
+        "4",
+        "4"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20",
+        "20",
+        "20",
+        "20"
+    ],
+    "temperature_vitrification": [
+        "100"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X2D 0.4 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.8 nozzle.json

@@ -1,299 +1,134 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL X2D 0.8 nozzle",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_30",
-	"instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_cooling_before_tower": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow",
-		"Bowden Standard",
-		"Bowden High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50",
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30",
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_bridge_speed": [
-		"25",
-		"25",
-		"25",
-		"25"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14",
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"nil",
-		"Spiral Lift",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"chamber_temperatures": [
-		"65"
-	],
-	"counter_coef_2": [
-		"0.0124"
-	],
-	"counter_coef_3": [
-		"0.0241"
-	],
-	"counter_limit_max": [
-		"0.3341"
-	],
-	"counter_limit_min": [
-		"0.0241"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_extruder_compatibility": [
-		"24"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95",
-		"0.95",
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"16",
-		"35",
-		"16",
-		"16"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_tower_interface_print_temp": [
-		"270"
-	],
-	"hole_coef_2": [
-		"-0.0008"
-	],
-	"hole_coef_3": [
-		"0.1319"
-	],
-	"hole_limit_max": [
-		"0.1319"
-	],
-	"hole_limit_min": [
-		"0.1119"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270",
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260",
-		"260",
-		"260"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"compatible_printers": [
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS @BBL X2D 0.8 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_30",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_extruder_compatibility": [
+        "24"
+    ],
+    "filament_flow_ratio": [
+        "0.95",
+        "0.95",
+        "0.95",
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "16",
+        "35",
+        "16",
+        "16"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0",
+        "0"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "nil",
+        "nil",
+        "nil"
+    ],
+    "filament_tower_interface_print_temp": [
+        "270"
+    ],
+    "filament_wipe": [
+        "1",
+        "nil",
+        "1",
+        "nil"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "nil",
+        "1",
+        "nil"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "nil",
+        "Spiral Lift",
+        "nil"
+    ],
+    "hole_coef_2": [
+        "-0.0008"
+    ],
+    "hole_coef_3": [
+        "0.1319"
+    ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
+    "hole_limit_min": [
+        "0.1119"
+    ],
+    "include": [
+        "fdm_filament_template_direct_bowden"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260",
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "3",
+        "3",
+        "4",
+        "4"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X2D 0.8 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL X2D.json

@@ -1,299 +1,160 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @BBL X2D",
-	"inherits": "Bambu ABS @base",
-	"from": "system",
-	"setting_id": "GFSB00_19",
-	"instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_cooling_before_tower": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow",
-		"Bowden Standard",
-		"Bowden High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50",
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30",
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_bridge_speed": [
-		"25",
-		"25",
-		"25",
-		"25"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14",
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"nil",
-		"Spiral Lift",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"chamber_temperatures": [
-		"65"
-	],
-	"counter_coef_2": [
-		"0.0124"
-	],
-	"counter_coef_3": [
-		"0.0241"
-	],
-	"counter_limit_max": [
-		"0.3341"
-	],
-	"counter_limit_min": [
-		"0.0241"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"filament_extruder_compatibility": [
-		"24"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95",
-		"0.95",
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"16",
-		"35",
-		"16",
-		"16"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_tower_interface_print_temp": [
-		"270"
-	],
-	"hole_coef_2": [
-		"-0.0008"
-	],
-	"hole_coef_3": [
-		"0.1319"
-	],
-	"hole_limit_max": [
-		"0.1319"
-	],
-	"hole_limit_min": [
-		"0.1119"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270",
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260",
-		"260",
-		"260"
-	],
-	"slow_down_layer_time": [
-		"12"
-	],
-	"compatible_printers": [
-		"Bambu Lab X2D 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
+    "type": "filament",
+    "name": "Bambu ABS @BBL X2D",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_19",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_extruder_compatibility": [
+        "24"
+    ],
+    "filament_flow_ratio": [
+        "0.95",
+        "0.95",
+        "0.95",
+        "0.95",
+        "0.95",
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "16",
+        "35",
+        "16",
+        "16",
+        "16",
+        "16"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0",
+        "0",
+        "0",
+        "0"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "10",
+        "10",
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "nil",
+        "0.4",
+        "nil",
+        "nil",
+        "nil"
+    ],
+    "filament_tower_interface_print_temp": [
+        "270"
+    ],
+    "filament_wipe": [
+        "1",
+        "nil",
+        "1",
+        "1",
+        "nil",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "nil",
+        "1",
+        "1",
+        "nil",
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "nil",
+        "Spiral Lift",
+        "Spiral Lift",
+        "nil",
+        "Spiral Lift"
+    ],
+    "hole_coef_2": [
+        "-0.0008"
+    ],
+    "hole_coef_3": [
+        "0.1319"
+    ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
+    "hole_limit_min": [
+        "0.1119"
+    ],
+    "include": [
+        "fdm_filament_template_direct_bowden_e3d"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270",
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260",
+        "260",
+        "260",
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "3",
+        "3",
+        "3",
+        "4",
+        "4",
+        "4"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20",
+        "20",
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X2D 0.6 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
 }

resources/profiles/BBL/filament/Bambu ABS @base.json

@@ -1,21 +1,21 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS @base",
-	"inherits": "fdm_filament_abs",
-	"from": "system",
-	"filament_id": "OFhuaUQB",
-	"instantiation": "false",
-	"description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
-	"filament_cost": [
-		"24.99"
-	],
-	"filament_flow_ratio": [
-		"0.95"
-	],
-	"filament_vendor": [
-		"Bambu Lab"
-	],
-	"impact_strength_z": [
-		"7.4"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS @base",
+    "inherits": "fdm_filament_abs",
+    "from": "system",
+    "filament_id": "OFhuaUQB",
+    "instantiation": "false",
+    "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
+    "filament_cost": [
+        "15.99"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "impact_strength_z": [
+        "7.4"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS-GF @BBL A1.json

@@ -1,19 +1,19 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS-GF @BBL A1",
-	"inherits": "Bambu ABS-GF @base",
-	"from": "system",
-	"setting_id": "GFSB50_02",
-	"instantiation": "true",
-	"filament_long_retractions_when_cut": [
-		"1"
-	],
-	"filament_retraction_distances_when_cut": [
-		"18"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 0.4 nozzle",
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS-GF @BBL A1",
+    "inherits": "Bambu ABS-GF @base",
+    "from": "system",
+    "setting_id": "GFSB50_02",
+    "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 0.4 nozzle",
+        "Bambu Lab A1 0.6 nozzle",
+        "Bambu Lab A1 0.8 nozzle"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2C 0.4 nozzle.json

@@ -1,174 +1,86 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS-GF @BBL H2C 0.4 nozzle",
-	"inherits": "Bambu ABS-GF @base",
-	"from": "system",
-	"setting_id": "GFSB50_08",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"60"
-	],
-	"filament_cooling_before_tower": [
-		"10",
-		"10"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12"
-	],
-	"filament_prime_volume": [
-		"30"
-	],
-	"filament_prime_volume_nc": [
-		"30"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"230",
-		"230"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"1",
-		"1"
-	],
-	"filament_change_length": [
-		"4"
-	],
-	"first_x_layer_fan_speed": [
-		"0"
-	],
-	"filament_change_length_nc": [
-		"4"
-	],
-	"filament_preheat_temperature_delta": [
-		"20",
-		"20"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"75"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS-GF @BBL H2C 0.4 nozzle",
+    "inherits": "Bambu ABS-GF @base",
+    "from": "system",
+    "setting_id": "GFSB50_08",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "60"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "12",
+        "12",
+        "12"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_prime_volume_nc": [
+        "30"
+    ],
+    "filament_pre_cooling_temperature_nc": [
+        "230",
+        "230",
+        "230"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0"
+    ],
+    "filament_ramming_travel_time_nc": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "first_x_layer_fan_speed": [
+        "0"
+    ],
+    "filament_change_length_nc": [
+        "4"
+    ],
+    "filament_preheat_temperature_delta": [
+        "20",
+        "20",
+        "20"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260",
+        "260"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20"
+    ],
+    "temperature_vitrification": [
+        "75"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2C 0.4 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2C.json

@@ -1,175 +1,87 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS-GF @BBL H2C",
-	"inherits": "Bambu ABS-GF @base",
-	"from": "system",
-	"setting_id": "GFSB50_09",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"60"
-	],
-	"filament_cooling_before_tower": [
-		"10",
-		"10"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12"
-	],
-	"filament_prime_volume": [
-		"30"
-	],
-	"filament_prime_volume_nc": [
-		"30"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"230",
-		"230"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"1",
-		"1"
-	],
-	"filament_change_length": [
-		"4"
-	],
-	"first_x_layer_fan_speed": [
-		"0"
-	],
-	"filament_change_length_nc": [
-		"4"
-	],
-	"filament_preheat_temperature_delta": [
-		"20",
-		"20"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"75"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.6 nozzle",
-		"Bambu Lab H2C 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS-GF @BBL H2C",
+    "inherits": "Bambu ABS-GF @base",
+    "from": "system",
+    "setting_id": "GFSB50_09",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "60"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "12",
+        "12",
+        "12"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_prime_volume_nc": [
+        "30"
+    ],
+    "filament_pre_cooling_temperature_nc": [
+        "230",
+        "230",
+        "230"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0"
+    ],
+    "filament_ramming_travel_time_nc": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "first_x_layer_fan_speed": [
+        "0"
+    ],
+    "filament_change_length_nc": [
+        "4"
+    ],
+    "filament_preheat_temperature_delta": [
+        "20",
+        "20",
+        "20"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260",
+        "260"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20"
+    ],
+    "temperature_vitrification": [
+        "75"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2C 0.6 nozzle",
+        "Bambu Lab H2C 0.8 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2D.json

@@ -1,130 +1,61 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS-GF @BBL H2D",
-	"inherits": "Bambu ABS-GF @base",
-	"from": "system",
-	"setting_id": "GFSB50_03",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"60"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D 0.4 nozzle",
-		"Bambu Lab H2D 0.6 nozzle",
-		"Bambu Lab H2D 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS-GF @BBL H2D",
+    "inherits": "Bambu ABS-GF @base",
+    "from": "system",
+    "setting_id": "GFSB50_03",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "60"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "12",
+        "12",
+        "12"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260",
+        "260"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2D 0.4 nozzle",
+        "Bambu Lab H2D 0.6 nozzle",
+        "Bambu Lab H2D 0.8 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2DP.json

@@ -1,130 +1,49 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS-GF @BBL H2DP",
-	"inherits": "Bambu ABS-GF @base",
-	"from": "system",
-	"setting_id": "GFSB50_05",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"60"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D Pro 0.4 nozzle",
-		"Bambu Lab H2D Pro 0.6 nozzle",
-		"Bambu Lab H2D Pro 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS-GF @BBL H2DP",
+    "inherits": "Bambu ABS-GF @base",
+    "from": "system",
+    "setting_id": "GFSB50_05",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "60"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "12",
+        "12"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2D Pro 0.4 nozzle",
+        "Bambu Lab H2D Pro 0.6 nozzle",
+        "Bambu Lab H2D Pro 0.8 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2S.json

@@ -1,130 +1,71 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS-GF @BBL H2S",
-	"inherits": "Bambu ABS-GF @base",
-	"from": "system",
-	"setting_id": "GFSB50_10",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"60"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2S 0.4 nozzle",
-		"Bambu Lab H2S 0.6 nozzle",
-		"Bambu Lab H2S 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS-GF @BBL H2S",
+    "inherits": "Bambu ABS-GF @base",
+    "from": "system",
+    "setting_id": "GFSB50_10",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "60"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "12",
+        "12",
+        "12"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0",
+        "0"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2S 0.4 nozzle",
+        "Bambu Lab H2S 0.6 nozzle",
+        "Bambu Lab H2S 0.8 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS-GF @BBL P1P.json

@@ -1,121 +1,52 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS-GF @BBL P1P",
-	"inherits": "Bambu ABS-GF @base",
-	"from": "system",
-	"setting_id": "GFSB50_01",
-	"instantiation": "true",
-	"filament_long_retractions_when_cut": [
-		"1",
-		"1"
-	],
-	"filament_retraction_distances_when_cut": [
-		"18",
-		"18"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1P 0.6 nozzle",
-		"Bambu Lab P1P 0.4 nozzle"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS-GF @BBL P1P",
+    "inherits": "Bambu ABS-GF @base",
+    "from": "system",
+    "setting_id": "GFSB50_01",
+    "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1",
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "12",
+        "12"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18",
+        "18"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P1P 0.8 nozzle",
+        "Bambu Lab P1P 0.6 nozzle",
+        "Bambu Lab P1P 0.4 nozzle"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS-GF @BBL P2S.json

@@ -1,170 +1,70 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS-GF @BBL P2S",
-	"inherits": "Bambu ABS-GF @base",
-	"from": "system",
-	"setting_id": "GFSB50_04",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"60"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P2S 0.4 nozzle",
-		"Bambu Lab P2S 0.6 nozzle",
-		"Bambu Lab P2S 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS-GF @BBL P2S",
+    "inherits": "Bambu ABS-GF @base",
+    "from": "system",
+    "setting_id": "GFSB50_04",
+    "instantiation": "true",
+    "activate_air_filtration": [
+        "0"
+    ],
+    "chamber_temperatures": [
+        "60"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "12",
+        "12",
+        "12"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "10",
+        "10",
+        "10"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0",
+        "0"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P2S 0.4 nozzle",
+        "Bambu Lab P2S 0.6 nozzle",
+        "Bambu Lab P2S 0.8 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS-GF @BBL X1C.json

@@ -1,130 +1,61 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS-GF @BBL X1C",
-	"inherits": "Bambu ABS-GF @base",
-	"from": "system",
-	"setting_id": "GFSB50_00",
-	"instantiation": "true",
-	"filament_long_retractions_when_cut": [
-		"1",
-		"1"
-	],
-	"filament_retraction_distances_when_cut": [
-		"18",
-		"18"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
-		"Bambu Lab P1S 0.8 nozzle",
-		"Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
-		"Bambu Lab X1 Carbon 0.8 nozzle",
-		"Bambu Lab X1E 0.4 nozzle",
-		"Bambu Lab X1E 0.6 nozzle",
-		"Bambu Lab X1E 0.8 nozzle"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS-GF @BBL X1C",
+    "inherits": "Bambu ABS-GF @base",
+    "from": "system",
+    "setting_id": "GFSB50_00",
+    "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1",
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "12",
+        "12"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18",
+        "18"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle",
+        "Bambu Lab X1 0.4 nozzle",
+        "Bambu Lab X1 0.6 nozzle",
+        "Bambu Lab X1 0.8 nozzle",
+        "Bambu Lab X1 Carbon 0.4 nozzle",
+        "Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 Carbon 0.8 nozzle",
+        "Bambu Lab X1E 0.4 nozzle",
+        "Bambu Lab X1E 0.6 nozzle",
+        "Bambu Lab X1E 0.8 nozzle"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS-GF @BBL X2D 0.4 nozzle.json

@@ -1,266 +1,103 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS-GF @BBL X2D 0.4 nozzle",
-	"inherits": "Bambu ABS-GF @base",
-	"from": "system",
-	"setting_id": "GFSB50_06",
-	"instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_cooling_before_tower": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow",
-		"Bowden Standard",
-		"Bowden High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50",
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30",
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_bridge_speed": [
-		"25",
-		"25",
-		"25",
-		"25"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14",
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"1",
-		"1",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"chamber_temperatures": [
-		"60"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95",
-		"0.95",
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_tower_interface_print_temp": [
-		"270"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270",
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260",
-		"260",
-		"260"
-	],
-	"compatible_printers": [
-		"Bambu Lab X2D 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS-GF @BBL X2D 0.4 nozzle",
+    "inherits": "Bambu ABS-GF @base",
+    "from": "system",
+    "setting_id": "GFSB50_06",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "60"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_flow_ratio": [
+        "0.95",
+        "0.95",
+        "0.95",
+        "0.95",
+        "0.95",
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "12",
+        "12",
+        "12",
+        "12",
+        "12",
+        "12"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0",
+        "0",
+        "0",
+        "0"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "10",
+        "10",
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_retraction_length": [
+        "1",
+        "1",
+        "1",
+        "nil",
+        "nil",
+        "nil"
+    ],
+    "filament_tower_interface_print_temp": [
+        "270"
+    ],
+    "include": [
+        "fdm_filament_template_direct_bowden_e3d"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270",
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260",
+        "260",
+        "260",
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "3",
+        "3",
+        "3",
+        "4",
+        "4",
+        "4"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20",
+        "20",
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X2D 0.4 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS-GF @BBL X2D.json

@@ -1,267 +1,104 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS-GF @BBL X2D",
-	"inherits": "Bambu ABS-GF @base",
-	"from": "system",
-	"setting_id": "GFSB50_07",
-	"instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_cooling_before_tower": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow",
-		"Bowden Standard",
-		"Bowden High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50",
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30",
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_bridge_speed": [
-		"25",
-		"25",
-		"25",
-		"25"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14",
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"1",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"chamber_temperatures": [
-		"60"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95",
-		"0.95",
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"12",
-		"12",
-		"12",
-		"12"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_tower_interface_print_temp": [
-		"270"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270",
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"260",
-		"260",
-		"260",
-		"260"
-	],
-	"compatible_printers": [
-		"Bambu Lab X2D 0.6 nozzle",
-		"Bambu Lab X2D 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS-GF @BBL X2D",
+    "inherits": "Bambu ABS-GF @base",
+    "from": "system",
+    "setting_id": "GFSB50_07",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "60"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_flow_ratio": [
+        "0.95",
+        "0.95",
+        "0.95",
+        "0.95",
+        "0.95",
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "12",
+        "12",
+        "12",
+        "12",
+        "12",
+        "12"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0",
+        "0",
+        "0",
+        "0"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "10",
+        "10",
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_retraction_length": [
+        "1",
+        "nil",
+        "1",
+        "nil",
+        "nil",
+        "nil"
+    ],
+    "filament_tower_interface_print_temp": [
+        "270"
+    ],
+    "include": [
+        "fdm_filament_template_direct_bowden_e3d"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270",
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260",
+        "260",
+        "260",
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "3",
+        "3",
+        "3",
+        "4",
+        "4",
+        "4"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20",
+        "20",
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X2D 0.6 nozzle",
+        "Bambu Lab X2D 0.8 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS-GF @base.json

@@ -1,45 +1,45 @@
 {
-	"type": "filament",
-	"name": "Bambu ABS-GF @base",
-	"inherits": "fdm_filament_abs",
-	"from": "system",
-	"filament_id": "OFknl9Iz",
-	"instantiation": "false",
-	"description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
-	"fan_cooling_layer_time": [
-		"12"
-	],
-	"fan_max_speed": [
-		"30"
-	],
-	"filament_cost": [
-		"29.99"
-	],
-	"filament_density": [
-		"1.08"
-	],
-	"filament_flow_ratio": [
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"12"
-	],
-	"filament_type": [
-		"ABS-GF"
-	],
-	"filament_vendor": [
-		"Bambu Lab"
-	],
-	"impact_strength_z": [
-		"5.3"
-	],
-	"overhang_fan_speed": [
-		"30"
-	],
-	"overhang_fan_threshold": [
-		"10%"
-	],
-	"slow_down_layer_time": [
-		"4"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ABS-GF @base",
+    "inherits": "fdm_filament_abs",
+    "from": "system",
+    "filament_id": "OFknl9Iz",
+    "instantiation": "false",
+    "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
+    "fan_cooling_layer_time": [
+        "12"
+    ],
+    "fan_max_speed": [
+        "30"
+    ],
+    "filament_cost": [
+        "26.99"
+    ],
+    "filament_density": [
+        "1.08"
+    ],
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "12"
+    ],
+    "filament_type": [
+        "ABS-GF"
+    ],
+    "filament_vendor": [
+        "Bambu Lab"
+    ],
+    "impact_strength_z": [
+        "5.3"
+    ],
+    "overhang_fan_speed": [
+        "30"
+    ],
+    "overhang_fan_threshold": [
+        "10%"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ]
+}

resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.2 nozzle.json

@@ -1,20 +1,20 @@
 {
-	"type": "filament",
-	"name": "Bambu ASA @BBL A1 0.2 nozzle",
-	"inherits": "Bambu ASA @base",
-	"from": "system",
-	"setting_id": "GFSB01_10",
-	"instantiation": "true",
-	"filament_long_retractions_when_cut": [
-		"1"
-	],
-	"filament_max_volumetric_speed": [
-		"2"
-	],
-	"filament_retraction_distances_when_cut": [
-		"18"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 0.2 nozzle"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ASA @BBL A1 0.2 nozzle",
+    "inherits": "Bambu ASA @base",
+    "from": "system",
+    "setting_id": "GFSB01_10",
+    "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 0.2 nozzle"
+    ]
+}

resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.4 nozzle.json

@@ -1,20 +1,20 @@
 {
-	"type": "filament",
-	"name": "Bambu ASA @BBL A1 0.4 nozzle",
-	"inherits": "Bambu ASA @base",
-	"from": "system",
-	"setting_id": "GFSB01_09",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"60"
-	],
-	"filament_long_retractions_when_cut": [
-		"1"
-	],
-	"filament_retraction_distances_when_cut": [
-		"18"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 0.4 nozzle"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ASA @BBL A1 0.4 nozzle",
+    "inherits": "Bambu ASA @base",
+    "from": "system",
+    "setting_id": "GFSB01_09",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "60"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 0.4 nozzle"
+    ]
+}

resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.6 nozzle.json

@@ -1,21 +1,21 @@
 {
-	"type": "filament",
-	"name": "Bambu ASA @BBL A1 0.6 nozzle",
-	"inherits": "Bambu ASA @base",
-	"from": "system",
-	"setting_id": "GFSB01_08",
-	"instantiation": "true",
-	"fan_min_speed": [
-		"25"
-	],
-	"filament_long_retractions_when_cut": [
-		"1"
-	],
-	"filament_retraction_distances_when_cut": [
-		"18"
-	],
-	"compatible_printers": [
-		"Bambu Lab A1 0.6 nozzle",
-		"Bambu Lab A1 0.8 nozzle"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ASA @BBL A1 0.6 nozzle",
+    "inherits": "Bambu ASA @base",
+    "from": "system",
+    "setting_id": "GFSB01_08",
+    "instantiation": "true",
+    "fan_min_speed": [
+        "25"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18"
+    ],
+    "compatible_printers": [
+        "Bambu Lab A1 0.6 nozzle",
+        "Bambu Lab A1 0.8 nozzle"
+    ]
+}

resources/profiles/BBL/filament/Bambu ASA @BBL H2C 0.2 nozzle.json

@@ -1,201 +1,104 @@
 {
-	"type": "filament",
-	"name": "Bambu ASA @BBL H2C 0.2 nozzle",
-	"inherits": "Bambu ASA @base",
-	"from": "system",
-	"setting_id": "GFSB01_24",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"65"
-	],
-	"counter_coef_2": [
-		"0.0094"
-	],
-	"counter_coef_3": [
-		"-0.0092"
-	],
-	"counter_limit_max": [
-		"0.2258"
-	],
-	"counter_limit_min": [
-		"-0.0092"
-	],
-	"filament_change_length": [
-		"4"
-	],
-	"filament_cooling_before_tower": [
-		"10",
-		"10"
-	],
-	"filament_max_volumetric_speed": [
-		"2",
-		"2"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"230",
-		"230"
-	],
-	"filament_prime_volume": [
-		"30"
-	],
-	"filament_prime_volume_nc": [
-		"30"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"1",
-		"1"
-	],
-	"first_x_layer_fan_speed": [
-		"0"
-	],
-	"filament_change_length_nc": [
-		"4"
-	],
-	"hole_coef_2": [
-		"0.0013"
-	],
-	"hole_coef_3": [
-		"0.1261"
-	],
-	"hole_limit_max": [
-		"0.1586"
-	],
-	"hole_limit_min": [
-		"0.1261"
-	],
-	"filament_preheat_temperature_delta": [
-		"20",
-		"20"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"85"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ASA @BBL H2C 0.2 nozzle",
+    "inherits": "Bambu ASA @base",
+    "from": "system",
+    "setting_id": "GFSB01_24",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0094"
+    ],
+    "counter_coef_3": [
+        "-0.0092"
+    ],
+    "counter_limit_max": [
+        "0.2258"
+    ],
+    "counter_limit_min": [
+        "-0.0092"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "2",
+        "2"
+    ],
+    "filament_pre_cooling_temperature_nc": [
+        "230",
+        "230"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_prime_volume_nc": [
+        "30"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_ramming_travel_time_nc": [
+        "1",
+        "1"
+    ],
+    "first_x_layer_fan_speed": [
+        "0"
+    ],
+    "filament_change_length_nc": [
+        "4"
+    ],
+    "hole_coef_2": [
+        "0.0013"
+    ],
+    "hole_coef_3": [
+        "0.1261"
+    ],
+    "hole_limit_max": [
+        "0.1586"
+    ],
+    "hole_limit_min": [
+        "0.1261"
+    ],
+    "filament_preheat_temperature_delta": [
+        "20",
+        "20"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270",
+        "270"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "temperature_vitrification": [
+        "85"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2C 0.2 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ASA @BBL H2C 0.6 nozzle.json

@@ -1,198 +1,135 @@
 {
-	"type": "filament",
-	"name": "Bambu ASA @BBL H2C 0.6 nozzle",
-	"inherits": "Bambu ASA @base",
-	"from": "system",
-	"setting_id": "GFSB01_37",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"65"
-	],
-	"counter_coef_2": [
-		"0.0094"
-	],
-	"counter_coef_3": [
-		"-0.0092"
-	],
-	"counter_limit_max": [
-		"0.2258"
-	],
-	"counter_limit_min": [
-		"-0.0092"
-	],
-	"filament_change_length": [
-		"4"
-	],
-	"filament_cooling_before_tower": [
-		"10",
-		"10"
-	],
-	"filament_flow_ratio": [
-		"0.96",
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"25",
-		"30"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"230",
-		"230"
-	],
-	"filament_prime_volume": [
-		"30"
-	],
-	"filament_prime_volume_nc": [
-		"30"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"1",
-		"1"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"first_x_layer_fan_speed": [
-		"0"
-	],
-	"filament_change_length_nc": [
-		"4"
-	],
-	"hole_coef_2": [
-		"0.0013"
-	],
-	"hole_coef_3": [
-		"0.1261"
-	],
-	"hole_limit_max": [
-		"0.1586"
-	],
-	"hole_limit_min": [
-		"0.1261"
-	],
-	"filament_preheat_temperature_delta": [
-		"20",
-		"20"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"85"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
+    "type": "filament",
+    "name": "Bambu ASA @BBL H2C 0.6 nozzle",
+    "inherits": "Bambu ASA @base",
+    "from": "system",
+    "setting_id": "GFSB01_37",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0094"
+    ],
+    "counter_coef_3": [
+        "-0.0092"
+    ],
+    "counter_limit_min": [
+        "-0.0092"
+    ],
+    "counter_limit_max": [
+        "0.2258"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_flow_ratio": [
+        "0.96",
+        "0.96",
+        "0.96"
+    ],
+    "filament_max_volumetric_speed": [
+        "25",
+        "30",
+        "25"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_prime_volume_nc": [
+        "30"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "filament_pre_cooling_temperature_nc": [
+        "230",
+        "230",
+        "230"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0"
+    ],
+    "filament_ramming_travel_time_nc": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "filament_change_length_nc": [
+        "4"
+    ],
+    "first_x_layer_fan_speed": [
+        "0"
+    ],
+    "hole_coef_2": [
+        "0.0013"
+    ],
+    "hole_coef_3": [
+        "0.1261"
+    ],
+    "hole_limit_min": [
+        "0.1261"
+    ],
+    "hole_limit_max": [
+        "0.1586"
+    ],
+    "filament_preheat_temperature_delta": [
+        "20",
+        "20",
+        "20"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270",
+        "270",
+        "270"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20"
+    ],
+    "temperature_vitrification": [
+        "85"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2C 0.6 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL H2C 0.8 nozzle.json

@@ -1,198 +1,121 @@
 {
-	"type": "filament",
-	"name": "Bambu ASA @BBL H2C 0.8 nozzle",
-	"inherits": "Bambu ASA @base",
-	"from": "system",
-	"setting_id": "GFSB01_38",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"65"
-	],
-	"counter_coef_2": [
-		"0.0094"
-	],
-	"counter_coef_3": [
-		"-0.0092"
-	],
-	"counter_limit_max": [
-		"0.2258"
-	],
-	"counter_limit_min": [
-		"-0.0092"
-	],
-	"filament_change_length": [
-		"4"
-	],
-	"filament_cooling_before_tower": [
-		"10",
-		"10"
-	],
-	"filament_flow_ratio": [
-		"0.96",
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"25",
-		"30"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"230",
-		"230"
-	],
-	"filament_prime_volume": [
-		"30"
-	],
-	"filament_prime_volume_nc": [
-		"30"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"1",
-		"1"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"first_x_layer_fan_speed": [
-		"0"
-	],
-	"filament_change_length_nc": [
-		"4"
-	],
-	"hole_coef_2": [
-		"0.0013"
-	],
-	"hole_coef_3": [
-		"0.1261"
-	],
-	"hole_limit_max": [
-		"0.1586"
-	],
-	"hole_limit_min": [
-		"0.1261"
-	],
-	"filament_preheat_temperature_delta": [
-		"20",
-		"20"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"85"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ASA @BBL H2C 0.8 nozzle",
+    "inherits": "Bambu ASA @base",
+    "from": "system",
+    "setting_id": "GFSB01_38",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0094"
+    ],
+    "counter_coef_3": [
+        "-0.0092"
+    ],
+    "counter_limit_max": [
+        "0.2258"
+    ],
+    "counter_limit_min": [
+        "-0.0092"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_flow_ratio": [
+        "0.96",
+        "0.96"
+    ],
+    "filament_max_volumetric_speed": [
+        "25",
+        "30"
+    ],
+    "filament_pre_cooling_temperature_nc": [
+        "230",
+        "230"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_prime_volume_nc": [
+        "30"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_ramming_travel_time_nc": [
+        "1",
+        "1"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "first_x_layer_fan_speed": [
+        "0"
+    ],
+    "filament_change_length_nc": [
+        "4"
+    ],
+    "hole_coef_2": [
+        "0.0013"
+    ],
+    "hole_coef_3": [
+        "0.1261"
+    ],
+    "hole_limit_max": [
+        "0.1586"
+    ],
+    "hole_limit_min": [
+        "0.1261"
+    ],
+    "filament_preheat_temperature_delta": [
+        "20",
+        "20"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270",
+        "270"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "temperature_vitrification": [
+        "85"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2C 0.8 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ASA @BBL H2C.json

@@ -1,198 +1,135 @@
 {
-	"type": "filament",
-	"name": "Bambu ASA @BBL H2C",
-	"inherits": "Bambu ASA @base",
-	"from": "system",
-	"setting_id": "GFSB01_23",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"65"
-	],
-	"counter_coef_2": [
-		"0.0094"
-	],
-	"counter_coef_3": [
-		"-0.0092"
-	],
-	"counter_limit_max": [
-		"0.2258"
-	],
-	"counter_limit_min": [
-		"-0.0092"
-	],
-	"filament_change_length": [
-		"4"
-	],
-	"filament_cooling_before_tower": [
-		"10",
-		"10"
-	],
-	"filament_flow_ratio": [
-		"0.96",
-		"0.96"
-	],
-	"filament_max_volumetric_speed": [
-		"20",
-		"30"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"230",
-		"230"
-	],
-	"filament_prime_volume": [
-		"30"
-	],
-	"filament_prime_volume_nc": [
-		"30"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"1",
-		"1"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.6"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"first_x_layer_fan_speed": [
-		"0"
-	],
-	"filament_change_length_nc": [
-		"4"
-	],
-	"hole_coef_2": [
-		"0.0013"
-	],
-	"hole_coef_3": [
-		"0.1261"
-	],
-	"hole_limit_max": [
-		"0.1586"
-	],
-	"hole_limit_min": [
-		"0.1261"
-	],
-	"filament_preheat_temperature_delta": [
-		"20",
-		"20"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20"
-	],
-	"temperature_vitrification": [
-		"85"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2C 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
+    "type": "filament",
+    "name": "Bambu ASA @BBL H2C",
+    "inherits": "Bambu ASA @base",
+    "from": "system",
+    "setting_id": "GFSB01_23",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0094"
+    ],
+    "counter_coef_3": [
+        "-0.0092"
+    ],
+    "counter_limit_min": [
+        "-0.0092"
+    ],
+    "counter_limit_max": [
+        "0.2258"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_flow_ratio": [
+        "0.96",
+        "0.96",
+        "0.96"
+    ],
+    "filament_max_volumetric_speed": [
+        "20",
+        "30",
+        "20"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.6",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_prime_volume_nc": [
+        "30"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "filament_pre_cooling_temperature_nc": [
+        "230",
+        "230",
+        "230"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0"
+    ],
+    "filament_ramming_travel_time_nc": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "filament_change_length_nc": [
+        "4"
+    ],
+    "first_x_layer_fan_speed": [
+        "0"
+    ],
+    "hole_coef_2": [
+        "0.0013"
+    ],
+    "hole_coef_3": [
+        "0.1261"
+    ],
+    "hole_limit_min": [
+        "0.1261"
+    ],
+    "hole_limit_max": [
+        "0.1586"
+    ],
+    "filament_preheat_temperature_delta": [
+        "20",
+        "20",
+        "20"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270",
+        "270",
+        "270"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20"
+    ],
+    "temperature_vitrification": [
+        "85"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2C 0.4 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.2 nozzle.json

@@ -1,128 +1,77 @@
 {
-	"type": "filament",
-	"name": "Bambu ASA @BBL H2D 0.2 nozzle",
-	"inherits": "Bambu ASA @base",
-	"from": "system",
-	"setting_id": "GFSB01_12",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"65"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"2",
-		"2"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ASA @BBL H2D 0.2 nozzle",
+    "inherits": "Bambu ASA @base",
+    "from": "system",
+    "setting_id": "GFSB01_12",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0094"
+    ],
+    "counter_coef_3": [
+        "-0.0092"
+    ],
+    "counter_limit_max": [
+        "0.2258"
+    ],
+    "counter_limit_min": [
+        "-0.0092"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "2",
+        "2"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "hole_coef_2": [
+        "0.0013"
+    ],
+    "hole_coef_3": [
+        "0.1261"
+    ],
+    "hole_limit_max": [
+        "0.1586"
+    ],
+    "hole_limit_min": [
+        "0.1261"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270",
+        "270"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2D 0.2 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.4 nozzle.json

@@ -1,149 +1,103 @@
 {
-	"type": "filament",
-	"name": "Bambu ASA @BBL H2D 0.4 nozzle",
-	"inherits": "Bambu ASA @base",
-	"from": "system",
-	"setting_id": "GFSB01_13",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"65"
-	],
-	"counter_coef_2": [
-		"0.007"
-	],
-	"counter_coef_3": [
-		"0.003"
-	],
-	"counter_limit_max": [
-		"0.1"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"20",
-		"35"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.006"
-	],
-	"hole_coef_3": [
-		"0.25"
-	],
-	"hole_limit_min": [
-		"-0.088"
-	],
-	"hole_limit_max": [
-		"0.14"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ASA @BBL H2D 0.4 nozzle",
+    "inherits": "Bambu ASA @base",
+    "from": "system",
+    "setting_id": "GFSB01_13",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0094"
+    ],
+    "counter_coef_3": [
+        "-0.0092"
+    ],
+    "counter_limit_max": [
+        "0.2258"
+    ],
+    "counter_limit_min": [
+        "-0.0092"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "20",
+        "35",
+        "20"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "hole_coef_2": [
+        "0.0013"
+    ],
+    "hole_coef_3": [
+        "0.1261"
+    ],
+    "hole_limit_max": [
+        "0.1586"
+    ],
+    "hole_limit_min": [
+        "0.1261"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270",
+        "270",
+        "270"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2D 0.4 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.6 nozzle.json

@@ -1,128 +1,103 @@
 {
-	"type": "filament",
-	"name": "Bambu ASA @BBL H2D 0.6 nozzle",
-	"inherits": "Bambu ASA @base",
-	"from": "system",
-	"setting_id": "GFSB01_11",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"65"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"25",
-		"35"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ASA @BBL H2D 0.6 nozzle",
+    "inherits": "Bambu ASA @base",
+    "from": "system",
+    "setting_id": "GFSB01_11",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0094"
+    ],
+    "counter_coef_3": [
+        "-0.0092"
+    ],
+    "counter_limit_max": [
+        "0.2258"
+    ],
+    "counter_limit_min": [
+        "-0.0092"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "25",
+        "35",
+        "25"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "hole_coef_2": [
+        "0.0013"
+    ],
+    "hole_coef_3": [
+        "0.1261"
+    ],
+    "hole_limit_max": [
+        "0.1586"
+    ],
+    "hole_limit_min": [
+        "0.1261"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270",
+        "270",
+        "270"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2D 0.6 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.8 nozzle.json

@@ -1,132 +1,97 @@
 {
-	"type": "filament",
-	"name": "Bambu ASA @BBL H2D 0.8 nozzle",
-	"inherits": "Bambu ASA @base",
-	"from": "system",
-	"setting_id": "GFSB01_33",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"65"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"25",
-		"35"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_extruder_id": [
-		"1",
-		"1"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ASA @BBL H2D 0.8 nozzle",
+    "inherits": "Bambu ASA @base",
+    "from": "system",
+    "setting_id": "GFSB01_33",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0094"
+    ],
+    "counter_coef_3": [
+        "-0.0092"
+    ],
+    "counter_limit_max": [
+        "0.2258"
+    ],
+    "counter_limit_min": [
+        "-0.0092"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "25",
+        "35"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_extruder_id": [
+        "1",
+        "1"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "hole_coef_2": [
+        "0.0013"
+    ],
+    "hole_coef_3": [
+        "0.1261"
+    ],
+    "hole_limit_max": [
+        "0.1586"
+    ],
+    "hole_limit_min": [
+        "0.1261"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270",
+        "270"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2D 0.8 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.2 nozzle.json

@@ -1,128 +1,47 @@
 {
-	"type": "filament",
-	"name": "Bambu ASA @BBL H2DP 0.2 nozzle",
-	"inherits": "Bambu ASA @base",
-	"from": "system",
-	"setting_id": "GFSB01_18",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"65"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"2",
-		"2"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D Pro 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ASA @BBL H2DP 0.2 nozzle",
+    "inherits": "Bambu ASA @base",
+    "from": "system",
+    "setting_id": "GFSB01_18",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "2",
+        "2"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270",
+        "270"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2D Pro 0.2 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.4 nozzle.json

@@ -1,149 +1,84 @@
 {
-	"type": "filament",
-	"name": "Bambu ASA @BBL H2DP 0.4 nozzle",
-	"inherits": "Bambu ASA @base",
-	"from": "system",
-	"setting_id": "GFSB01_19",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"65"
-	],
-	"counter_coef_2": [
-		"0.007"
-	],
-	"counter_coef_3": [
-		"0.003"
-	],
-	"counter_limit_max": [
-		"0.1"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"20",
-		"30"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.006"
-	],
-	"hole_coef_3": [
-		"0.25"
-	],
-	"hole_limit_min": [
-		"-0.088"
-	],
-	"hole_limit_max": [
-		"0.14"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D Pro 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
+    "type": "filament",
+    "name": "Bambu ASA @BBL H2DP 0.4 nozzle",
+    "inherits": "Bambu ASA @base",
+    "from": "system",
+    "setting_id": "GFSB01_19",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.007"
+    ],
+    "counter_coef_3": [
+        "0.003"
+    ],
+    "counter_limit_max": [
+        "0.1"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "20",
+        "30"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "hole_coef_2": [
+        "-0.006"
+    ],
+    "hole_coef_3": [
+        "0.25"
+    ],
+    "hole_limit_max": [
+        "0.14"
+    ],
+    "hole_limit_min": [
+        "-0.088"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270",
+        "270"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2D Pro 0.4 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.6 nozzle.json

@@ -1,128 +1,63 @@
 {
-	"type": "filament",
-	"name": "Bambu ASA @BBL H2DP 0.6 nozzle",
-	"inherits": "Bambu ASA @base",
-	"from": "system",
-	"setting_id": "GFSB01_17",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"65"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"25",
-		"35"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D Pro 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
+    "type": "filament",
+    "name": "Bambu ASA @BBL H2DP 0.6 nozzle",
+    "inherits": "Bambu ASA @base",
+    "from": "system",
+    "setting_id": "GFSB01_17",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "25",
+        "35"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270",
+        "270"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2D Pro 0.6 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.8 nozzle.json

@@ -1,128 +1,63 @@
 {
-	"type": "filament",
-	"name": "Bambu ASA @BBL H2DP 0.8 nozzle",
-	"inherits": "Bambu ASA @base",
-	"from": "system",
-	"setting_id": "GFSB01_34",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"65"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"25",
-		"35"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2D Pro 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ASA @BBL H2DP 0.8 nozzle",
+    "inherits": "Bambu ASA @base",
+    "from": "system",
+    "setting_id": "GFSB01_34",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "25",
+        "35"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270",
+        "270"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2D Pro 0.8 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ASA @BBL H2S 0.2 nozzle.json

@@ -1,134 +1,95 @@
 {
-	"type": "filament",
-	"name": "Bambu ASA @BBL H2S 0.2 nozzle",
-	"inherits": "Bambu ASA @base",
-	"from": "system",
-	"setting_id": "GFSB01_27",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"60"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"3",
-		"3"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"2",
-		"2"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2S 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ASA @BBL H2S 0.2 nozzle",
+    "inherits": "Bambu ASA @base",
+    "from": "system",
+    "setting_id": "GFSB01_27",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "60"
+    ],
+    "counter_coef_2": [
+        "0.0094"
+    ],
+    "counter_coef_3": [
+        "-0.0092"
+    ],
+    "counter_limit_min": [
+        "-0.0092"
+    ],
+    "counter_limit_max": [
+        "0.2258"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_flush_volumetric_speed": [
+        "3",
+        "3"
+    ],
+    "filament_max_volumetric_speed": [
+        "2",
+        "2"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "hole_coef_2": [
+        "0.0013"
+    ],
+    "hole_coef_3": [
+        "0.1261"
+    ],
+    "hole_limit_min": [
+        "0.1261"
+    ],
+    "hole_limit_max": [
+        "0.1586"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270",
+        "270"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "pre_start_fan_time": [
+        "2"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2S 0.2 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ASA @BBL H2S 0.6 nozzle.json

@@ -1,134 +1,119 @@
 {
-	"type": "filament",
-	"name": "Bambu ASA @BBL H2S 0.6 nozzle",
-	"inherits": "Bambu ASA @base",
-	"from": "system",
-	"setting_id": "GFSB01_36",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"60"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"25",
-		"35"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2S 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
+    "type": "filament",
+    "name": "Bambu ASA @BBL H2S 0.6 nozzle",
+    "inherits": "Bambu ASA @base",
+    "from": "system",
+    "setting_id": "GFSB01_36",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "60"
+    ],
+    "counter_coef_2": [
+        "0.0094"
+    ],
+    "counter_coef_3": [
+        "-0.0092"
+    ],
+    "counter_limit_min": [
+        "-0.0092"
+    ],
+    "counter_limit_max": [
+        "0.2258"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "25",
+        "35",
+        "25"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0"
+    ],
+    "hole_coef_2": [
+        "0.0013"
+    ],
+    "hole_coef_3": [
+        "0.1261"
+    ],
+    "hole_limit_min": [
+        "0.1261"
+    ],
+    "hole_limit_max": [
+        "0.1586"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270",
+        "270",
+        "270"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "pre_start_fan_time": [
+        "2"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0",
+        "0"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2S 0.6 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL H2S 0.8 nozzle.json

@@ -1,134 +1,107 @@
 {
-	"type": "filament",
-	"name": "Bambu ASA @BBL H2S 0.8 nozzle",
-	"inherits": "Bambu ASA @base",
-	"from": "system",
-	"setting_id": "GFSB01_35",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"60"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"25",
-		"35"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2S 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ASA @BBL H2S 0.8 nozzle",
+    "inherits": "Bambu ASA @base",
+    "from": "system",
+    "setting_id": "GFSB01_35",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "60"
+    ],
+    "counter_coef_2": [
+        "0.0094"
+    ],
+    "counter_coef_3": [
+        "-0.0092"
+    ],
+    "counter_limit_min": [
+        "-0.0092"
+    ],
+    "counter_limit_max": [
+        "0.2258"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "25",
+        "35"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "hole_coef_2": [
+        "0.0013"
+    ],
+    "hole_coef_3": [
+        "0.1261"
+    ],
+    "hole_limit_min": [
+        "0.1261"
+    ],
+    "hole_limit_max": [
+        "0.1586"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270",
+        "270"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "pre_start_fan_time": [
+        "2"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2S 0.8 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ASA @BBL H2S.json

@@ -1,134 +1,119 @@
 {
-	"type": "filament",
-	"name": "Bambu ASA @BBL H2S",
-	"inherits": "Bambu ASA @base",
-	"from": "system",
-	"setting_id": "GFSB01_26",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"60"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"20",
-		"35"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"overhang_fan_speed": [
-		"100"
-	],
-	"pre_start_fan_time": [
-		"2"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab H2S 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	],
-	"filament_end_gcode": [
-		"; filament end gcode \n"
-	]
+    "type": "filament",
+    "name": "Bambu ASA @BBL H2S",
+    "inherits": "Bambu ASA @base",
+    "from": "system",
+    "setting_id": "GFSB01_26",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "60"
+    ],
+    "counter_coef_2": [
+        "0.0094"
+    ],
+    "counter_coef_3": [
+        "-0.0092"
+    ],
+    "counter_limit_min": [
+        "-0.0092"
+    ],
+    "counter_limit_max": [
+        "0.2258"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "20",
+        "35",
+        "20"
+    ],
+    "filament_prime_volume": [
+        "30"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0"
+    ],
+    "hole_coef_2": [
+        "0.0013"
+    ],
+    "hole_coef_3": [
+        "0.1261"
+    ],
+    "hole_limit_min": [
+        "0.1261"
+    ],
+    "hole_limit_max": [
+        "0.1586"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270",
+        "270",
+        "270"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "pre_start_fan_time": [
+        "2"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0",
+        "0"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab H2S 0.4 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ],
+    "filament_end_gcode": [
+        "; filament end gcode \n"
+    ]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.2 nozzle.json

@@ -1,192 +1,101 @@
 {
-	"type": "filament",
-	"name": "Bambu ASA @BBL P2S 0.2 nozzle",
-	"inherits": "Bambu ASA @base",
-	"from": "system",
-	"setting_id": "GFSB01_15",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"65"
-	],
-	"eng_plate_temp": [
-		"90"
-	],
-	"eng_plate_temp_initial_layer": [
-		"90"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"fan_min_speed": [
-		"30"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"3",
-		"3"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"2",
-		"2"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"hot_plate_temp": [
-		"90"
-	],
-	"hot_plate_temp_initial_layer": [
-		"90"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"textured_plate_temp": [
-		"90"
-	],
-	"textured_plate_temp_initial_layer": [
-		"90"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P2S 0.2 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ASA @BBL P2S 0.2 nozzle",
+    "inherits": "Bambu ASA @base",
+    "from": "system",
+    "setting_id": "GFSB01_15",
+    "instantiation": "true",
+    "activate_air_filtration": [
+        "0"
+    ],
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0094"
+    ],
+    "counter_coef_3": [
+        "-0.0092"
+    ],
+    "counter_limit_max": [
+        "0.2258"
+    ],
+    "counter_limit_min": [
+        "-0.0092"
+    ],
+    "fan_max_speed": [
+        "60"
+    ],
+    "fan_min_speed": [
+        "30"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_flush_volumetric_speed": [
+        "3",
+        "3"
+    ],
+    "filament_max_volumetric_speed": [
+        "2",
+        "2"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "10",
+        "10"
+    ],
+    "filament_wipe": [
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1"
+    ],
+    "hole_coef_2": [
+        "0.0013"
+    ],
+    "hole_coef_3": [
+        "0.1261"
+    ],
+    "hole_limit_max": [
+        "0.1586"
+    ],
+    "hole_limit_min": [
+        "0.1261"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270",
+        "270"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P2S 0.2 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.4 nozzle.json

@@ -1,186 +1,102 @@
 {
-	"type": "filament",
-	"name": "Bambu ASA @BBL P2S 0.4 nozzle",
-	"inherits": "Bambu ASA @base",
-	"from": "system",
-	"setting_id": "GFSB01_16",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"65"
-	],
-	"eng_plate_temp": [
-		"90"
-	],
-	"eng_plate_temp_initial_layer": [
-		"90"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"18",
-		"25"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"hot_plate_temp": [
-		"90"
-	],
-	"hot_plate_temp_initial_layer": [
-		"90"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"textured_plate_temp": [
-		"90"
-	],
-	"textured_plate_temp_initial_layer": [
-		"90"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P2S 0.4 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
+    "type": "filament",
+    "name": "Bambu ASA @BBL P2S 0.4 nozzle",
+    "inherits": "Bambu ASA @base",
+    "from": "system",
+    "setting_id": "GFSB01_16",
+    "instantiation": "true",
+    "activate_air_filtration": [
+        "0"
+    ],
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0094"
+    ],
+    "counter_coef_3": [
+        "-0.0092"
+    ],
+    "counter_limit_min": [
+        "-0.0092"
+    ],
+    "counter_limit_max": [
+        "0.2258"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "18",
+        "25",
+        "18"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4",
+        "0.4"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0"
+    ],
+    "hole_coef_2": [
+        "0.0013"
+    ],
+    "hole_coef_3": [
+        "0.1261"
+    ],
+    "hole_limit_min": [
+        "0.1261"
+    ],
+    "hole_limit_max": [
+        "0.1586"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270",
+        "270",
+        "270"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0",
+        "0"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P2S 0.4 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.6 nozzle.json

@@ -1,189 +1,115 @@
 {
-	"type": "filament",
-	"name": "Bambu ASA @BBL P2S 0.6 nozzle",
-	"inherits": "Bambu ASA @base",
-	"from": "system",
-	"setting_id": "GFSB01_14",
-	"instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
-	"chamber_temperatures": [
-		"65"
-	],
-	"eng_plate_temp": [
-		"90"
-	],
-	"eng_plate_temp_initial_layer": [
-		"90"
-	],
-	"fan_min_speed": [
-		"25"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"18",
-		"35"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"hot_plate_temp": [
-		"90"
-	],
-	"hot_plate_temp_initial_layer": [
-		"90"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"textured_plate_temp": [
-		"90"
-	],
-	"textured_plate_temp_initial_layer": [
-		"90"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P2S 0.6 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
+    "type": "filament",
+    "name": "Bambu ASA @BBL P2S 0.6 nozzle",
+    "inherits": "Bambu ASA @base",
+    "from": "system",
+    "setting_id": "GFSB01_14",
+    "instantiation": "true",
+    "activate_air_filtration": [
+        "0"
+    ],
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0094"
+    ],
+    "counter_coef_3": [
+        "-0.0092"
+    ],
+    "counter_limit_min": [
+        "-0.0092"
+    ],
+    "counter_limit_max": [
+        "0.2258"
+    ],
+    "fan_min_speed": [
+        "25"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "18",
+        "35",
+        "18"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0"
+    ],
+    "hole_coef_2": [
+        "0.0013"
+    ],
+    "hole_coef_3": [
+        "0.1261"
+    ],
+    "hole_limit_min": [
+        "0.1261"
+    ],
+    "hole_limit_max": [
+        "0.1586"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270",
+        "270",
+        "270"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0",
+        "0"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P2S 0.6 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.8 nozzle.json

@@ -1,186 +1,91 @@
 {
-	"type": "filament",
-	"name": "Bambu ASA @BBL P2S 0.8 nozzle",
-	"inherits": "Bambu ASA @base",
-	"from": "system",
-	"setting_id": "GFSB01_32",
-	"instantiation": "true",
-	"chamber_temperatures": [
-		"65"
-	],
-	"eng_plate_temp": [
-		"90"
-	],
-	"eng_plate_temp_initial_layer": [
-		"90"
-	],
-	"fan_min_speed": [
-		"25"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_max_volumetric_speed": [
-		"18",
-		"35"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"hot_plate_temp": [
-		"90"
-	],
-	"hot_plate_temp_initial_layer": [
-		"90"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"textured_plate_temp": [
-		"90"
-	],
-	"textured_plate_temp_initial_layer": [
-		"90"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab P2S 0.8 nozzle"
-	],
-	"filament_start_gcode": [
-		"; filament start gcode\n"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ASA @BBL P2S 0.8 nozzle",
+    "inherits": "Bambu ASA @base",
+    "from": "system",
+    "setting_id": "GFSB01_32",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0094"
+    ],
+    "counter_coef_3": [
+        "-0.0092"
+    ],
+    "counter_limit_max": [
+        "0.2258"
+    ],
+    "counter_limit_min": [
+        "-0.0092"
+    ],
+    "fan_min_speed": [
+        "25"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
+    ],
+    "filament_max_volumetric_speed": [
+        "18",
+        "35"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "10",
+        "10"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "hole_coef_2": [
+        "0.0013"
+    ],
+    "hole_coef_3": [
+        "0.1261"
+    ],
+    "hole_limit_max": [
+        "0.1586"
+    ],
+    "hole_limit_min": [
+        "0.1261"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270",
+        "270"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P2S 0.8 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.2 nozzle.json

@@ -1,119 +1,50 @@
 {
-	"type": "filament",
-	"name": "Bambu ASA @BBL X1 0.2 nozzle",
-	"inherits": "Bambu ASA @base",
-	"from": "system",
-	"setting_id": "GFSB01_03",
-	"instantiation": "true",
-	"filament_long_retractions_when_cut": [
-		"1",
-		"1"
-	],
-	"filament_max_volumetric_speed": [
-		"2",
-		"2"
-	],
-	"filament_retraction_distances_when_cut": [
-		"18",
-		"18"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1 0.2 nozzle"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ASA @BBL X1 0.2 nozzle",
+    "inherits": "Bambu ASA @base",
+    "from": "system",
+    "setting_id": "GFSB01_03",
+    "instantiation": "true",
+    "filament_long_retractions_when_cut": [
+        "1",
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "2",
+        "2"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18",
+        "18"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270",
+        "270"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X1 0.2 nozzle"
+    ]
+}

resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.6 nozzle.json

@@ -1,125 +1,60 @@
 {
-	"type": "filament",
-	"name": "Bambu ASA @BBL X1 0.6 nozzle",
-	"inherits": "Bambu ASA @base",
-	"from": "system",
-	"setting_id": "GFSB01_04",
-	"instantiation": "true",
-	"fan_min_speed": [
-		"25"
-	],
-	"filament_long_retractions_when_cut": [
-		"1",
-		"1"
-	],
-	"filament_retraction_distances_when_cut": [
-		"18",
-		"18"
-	],
-	"filament_retraction_speed": [
-		"0.4",
-		"0.4"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"18",
-		"18"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"0",
-		"0"
-	],
-	"nozzle_temperature": [
-		"270",
-		"270"
-	],
-	"nozzle_temperature_initial_layer": [
-		"270",
-		"270"
-	],
-	"retraction_distances_when_ec": [
-		"0",
-		"0"
-	],
-	"textured_plate_temp_initial_layer": [
-		"V"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"compatible_printers": [
-		"Bambu Lab X1 0.6 nozzle"
-	]
-}
+    "type": "filament",
+    "name": "Bambu ASA @BBL X1 0.6 nozzle",
+    "inherits": "Bambu ASA @base",
+    "from": "system",
+    "setting_id": "GFSB01_04",
+    "instantiation": "true",
+    "fan_min_speed": [
+        "25"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1",
+        "1"
+    ],
+    "filament_max_volumetric_speed": [
+        "18",
+        "18"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18",
+        "18"
+    ],
+    "filament_retraction_speed": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270",
+        "270"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "V"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X1 0.6 nozzle"
+    ]
+}