Translate H2C Nozzle Rack Filament IDs at the Printer Boundary

The Bambu payload rewrite only matched tray_info_idx, filament_id and
filamentId. The H2C nozzle rack carries filament ids under cate (the auto
nozzle mapping request) and fila_id (the rack status), so the printer got
Orca's OF ids for the filaments and its own ids back for the nozzles in the
same request, and the device tab could not name a rack nozzle's filament.
Add both keys to one shared list used by the rewrite and its pre-check.

.claude/skills/orca-wxwidgets/references/platforms.md

@@ -574,7 +574,8 @@ DMABUF workaround and then branches on `GDK_BACKEND` (an `x11` prefix means the
 paths, when `/proc/driver/nvidia/version` exists and the linked WebKitGTK honours the switch (>= 2.44,
 `WebView::SupportsForceSharedMemory()`), it sets `WEBKIT_DMABUF_RENDERER_FORCE_SHM=1` and
 `WEBKIT_FORCE_DMABUF_RENDERER=1` (non-replacing): the proprietary driver cannot back WebKit's hardware
-DMABUF renderer. On the default path it forces `GDK_BACKEND=x11` when wx lacks EGL and `WAYLAND_DISPLAY`
+DMABUF renderer. On a hypervisor guest (`/proc/cpuinfo` `hypervisor` flag) and WebKitGTK >= 2.44 it sets
+`WEBKIT_DMABUF_RENDERER_FORCE_SHM=1` alone, since virtual GPUs cannot back the hardware path either. On the default path it forces `GDK_BACKEND=x11` when wx lacks EGL and `WAYLAND_DISPLAY`
 is set, and sets `WEBKIT_DISABLE_COMPOSITING_MODE=1` (non-replacing) inside that branch when the linked
 WebKitGTK is older than 2.42: a forced X11 backend in a Wayland session is the only default-path case
 that runs through XWayland, which `DISPLAY` and `WAYLAND_DISPLAY` alone do not tell you (a native

.claude/skills/orca-wxwidgets/references/webview-gl-aui-media.md

@@ -568,13 +568,18 @@ vue-resize workaround script and sets a persistent SQLite cookie store on the vi
 ## WebKitGTK on Linux sessions
 
 **Mechanism.** `CLI::run` (`src/OrcaSlicer.cpp`, under `#ifdef __WXGTK__`, before GTK initialises)
-sets the NVIDIA DMABUF workaround and then branches on `GDK_BACKEND`:
+sets the DMABUF workarounds and then branches on `GDK_BACKEND`:
 - **Both paths**, before the split: when `/proc/driver/nvidia/version` exists and the linked WebKitGTK
   honours the switch (>= 2.44, `WebView::SupportsForceSharedMemory()`), it sets
   `WEBKIT_DMABUF_RENDERER_FORCE_SHM=1` and `WEBKIT_FORCE_DMABUF_RENDERER=1` non-replacing. The
   proprietary driver cannot back WebKit's hardware DMABUF renderer, so the shared-memory transport keeps
   accelerated compositing instead of dropping it; `WEBKIT_FORCE_DMABUF_RENDERER` clears the
   Debian/Ubuntu/openSUSE `isNVIDIA()` early return, which otherwise returns before the FORCE_SHM check.
+- **Hypervisor guests**, same position: when `is_hypervisor_guest()` (the `hypervisor` flag in
+  `/proc/cpuinfo`) and WebKitGTK >= 2.44, it sets `WEBKIT_DMABUF_RENDERER_FORCE_SHM=1` non-replacing.
+  Virtual GPUs (VirtualBox VMSVGA, VMware, QEMU) cannot back the hardware DMABUF path either, and
+  FORCE_SHM alone was confirmed to fix web views in VirtualBox; the `WEBKIT_FORCE_DMABUF_RENDERER` pair
+  is not needed without the Debian `isNVIDIA()` patch. The flag is x86-only, so ARM guests are not covered.
 - **Default path** (`GDK_BACKEND` unset or not starting with `x11`): if wx lacks EGL (`!wxHAS_EGL`) and
   `WAYLAND_DISPLAY` is set, it forces `GDK_BACKEND=x11`, and in that same branch it sets
   `WEBKIT_DISABLE_COMPOSITING_MODE=1` non-replacing when the linked WebKitGTK predates 2.42
@@ -590,9 +595,9 @@ Runtime backend detection elsewhere uses Orca's `is_running_on_wayland()` / `is_
 (see `references/platforms.md`), not these environment variables.
 
 **Pitfall.**
-- **Rule:** On NVIDIA reach for `WEBKIT_DMABUF_RENDERER_FORCE_SHM` before
-  `WEBKIT_DISABLE_COMPOSITING_MODE`. **Why:** the proprietary driver cannot back WebKit's hardware
-  DMABUF renderer, leaving web views blank or slow; FORCE_SHM keeps accelerated compositing and only
+- **Rule:** On NVIDIA and hypervisor guests reach for `WEBKIT_DMABUF_RENDERER_FORCE_SHM` before
+  `WEBKIT_DISABLE_COMPOSITING_MODE`. **Why:** the proprietary driver and virtual GPUs cannot back WebKit's
+  hardware DMABUF renderer, leaving web views blank or slow; FORCE_SHM keeps accelerated compositing and only
   skips the hardware path, while disabling compositing drops it. Threaded scrolling is a separate,
   release-dependent default (off in 2.44/2.45, on from 2.46). `WEBKIT_DISABLE_DMABUF_RENDERER` is not a
   substitute — it is read first, leaves the transport set empty (no compositing from 2.44 on, where the

docs/HLSD/filament_id.md

@@ -350,8 +350,11 @@ identity default and translates nothing. `NetworkAgent` forwards both to the liv
 comparison sites below reach them through `wxGetApp().getAgent()` and leave an id untranslated
 while no agent is live. Whole documents are Bambu's business alone:
 `BBLPrinterAgent::to_orca_payload` and `from_orca_payload` rewrite every string under
-`tray_info_idx`, `filament_id` or `filamentId` at any depth; text that does not parse, or carries
-none of those keys, comes back unchanged. The map is loaded once, lazily; a missing or malformed
+`tray_info_idx`, `filament_id`, `filamentId`, `cate` or `fila_id` at any depth; text that does not
+parse, or carries none of those keys, comes back unchanged. The last two are the H2C nozzle rack's:
+`cate` in the auto nozzle mapping request, `fila_id` in the rack status. A new Bambu message that
+carries a filament id under another key needs that key added to `filament_id_keys`, or the id
+crosses the boundary untranslated. The map is loaded once, lazily; a missing or malformed
 file degrades to identity with a log line rather than failing.
 
 | Boundary | Where it translates |

src/OrcaSlicer.cpp

@@ -1126,6 +1126,19 @@ static void load_downward_settings_list_from_config(std::string config_file, std
     }
 }
 
+#ifdef __WXGTK__
+// Virtual GPUs (VirtualBox, VMware, QEMU) cannot back WebKit's hardware DMABUF renderer.
+static bool is_hypervisor_guest()
+{
+    std::ifstream cpuinfo("/proc/cpuinfo");
+    std::string line;
+    while (std::getline(cpuinfo, line))
+        if (boost::starts_with(line, "flags"))
+            return line.find(" hypervisor") != std::string::npos;
+    return false;
+}
+#endif
+
 int CLI::run(int argc, char **argv)
 {
     // Mark the main thread for the debugger and for runtime checks.
@@ -1176,6 +1189,9 @@ int CLI::run(int argc, char **argv)
             ::setenv("WEBKIT_FORCE_DMABUF_RENDERER", "1", /* replace */ false);
         }
 
+        if (is_hypervisor_guest() && WebView::SupportsForceSharedMemory())
+            ::setenv("WEBKIT_DMABUF_RENDERER_FORCE_SHM", "1", /* replace */ false);
+
         if (x11_opt_in) {
             // ===== X11 / XWayland (opted in via GDK_BACKEND=x11) =====
             BOOST_LOG_TRIVIAL(info) << "GDK_BACKEND=x11 detected; applying v2.3.2 X11/XWayland workarounds.";

src/libvgcode/src/Layers.cpp

@@ -75,7 +75,7 @@ std::vector<float> Layers::get_zs() const
 
 size_t Layers::get_layer_id_at(float z) const
 {
-    auto iter = std::upper_bound(m_items.begin(), m_items.end(), z, [](float z, const Item& item) { return item.z < z; });
+    auto iter = std::upper_bound(m_items.begin(), m_items.end(), z, [](float z, const Item& item) { return item.z > z; });
     return std::distance(m_items.begin(), iter);
 }
 

src/slic3r/GUI/Plater.cpp

@@ -21178,7 +21178,12 @@ void Plater::print_job_finished(wxCommandEvent &evt)
     Slic3r::DeviceManager* dev = Slic3r::GUI::wxGetApp().getDeviceManager();
     if (!dev) return;
 
-    dev->set_selected_machine(evt.GetString().ToStdString());
+    const std::string dev_id = evt.GetString().ToStdString();
+    MachineObject* selected = dev->get_selected_machine();
+    // After a LAN print, the completion event reselects the same printer.
+    // Keep the active session while asynchronous status traffic may still be in flight.
+    if (!selected || selected->get_dev_id() != dev_id || selected->connection_type() != "lan")
+        dev->set_selected_machine(dev_id);
     p->main_frame->request_select_tab(TAB_ID_MONITOR);
     // Selects the status page on a built Device tab; one built by the switch starts there.
     MonitorPanel* curr_monitor = MonitorPanel::if_built();

src/slic3r/Utils/BBLPrinterAgent.cpp

@@ -7,6 +7,8 @@
 #include "slic3r/GUI/GUI_App.hpp"
 #include "slic3r/GUI/DeviceCore/DevManager.h"
 
+#include <algorithm>
+#include <array>
 #include <boost/format.hpp>
 #include <boost/log/trivial.hpp>
 #include <boost/nowide/fstream.hpp>
@@ -16,6 +18,7 @@
 #include <cmath>
 #include <slic3r/GUI/DeviceManager.hpp>
 #include <string>
+#include <string_view>
 #include <utility>
 #include <vector>
 using json = nlohmann::json;
@@ -64,12 +67,16 @@ const BambuFilamentIdMap& bambu_filament_id_map()
     return map;
 }
 
-// Rewrites every string under "tray_info_idx", "filament_id" or "filamentId", at any depth, in place.
+// Keys whose string value is a filament id. "cate" and "fila_id" are the H2C nozzle rack's: the
+// auto nozzle mapping request and the rack status in the push message.
+constexpr std::array<std::string_view, 5> filament_id_keys{"tray_info_idx", "filament_id", "filamentId", "cate", "fila_id"};
+
+// Rewrites every string under a filament id key, at any depth, in place.
 void rewrite_filament_ids(json& j, const std::unordered_map<std::string, std::string>& map)
 {
     if (j.is_object()) {
         for (auto& [key, value] : j.items()) {
-            if (value.is_string() && (key == "tray_info_idx" || key == "filament_id" || key == "filamentId")) {
+            if (value.is_string() && std::find(filament_id_keys.begin(), filament_id_keys.end(), key) != filament_id_keys.end()) {
                 auto it = map.find(value.get_ref<const std::string&>());
                 if (it != map.end())
                     value = it->second;
@@ -84,8 +91,8 @@ void rewrite_filament_ids(json& j, const std::unordered_map<std::string, std::st
 // Text that does not parse as JSON, or that mentions none of the id keys, comes back byte-identical.
 std::string rewrite_filament_ids(std::string text, const std::unordered_map<std::string, std::string>& map)
 {
-    if (map.empty() || (text.find("tray_info_idx") == std::string::npos && text.find("filament_id") == std::string::npos &&
-                        text.find("filamentId") == std::string::npos))
+    if (map.empty() || std::none_of(filament_id_keys.begin(), filament_id_keys.end(),
+                                    [&text](std::string_view key) { return text.find(key) != std::string::npos; }))
         return text;                                        // nothing to map, skip the parse (moved, not copied)
     try {
         json j = json::parse(text);

tests/slic3rutils/test_bambu_filament_ids.cpp

@@ -81,3 +81,24 @@ TEST_CASE("Payload rewrite covers nested trays, calibration lists and mapping in
     CHECK(BBLPrinterAgent::from_orca_payload("not json") == "not json");
     CHECK(BBLPrinterAgent::from_orca_payload(R"({"print":{"command":"pushall"}})") == R"({"print":{"command":"pushall"}})");
 }
+
+TEST_CASE("Payload rewrite covers the nozzle rack status and the auto nozzle mapping request", "[BambuFilamentIds]")
+{
+    const ScopedRepoResourcesDir repo_resources;
+    const std::string petg_hf = orca_id_of("GFG96");
+
+    const std::string rack_status =
+        R"({"print":{"device":{"nozzle":{"info":[{"id":16,"fila_id":"GFG96","color_m":"FFFFFFFF"},{"id":17,"fila_id":"P22f54c9"}]}}}})";
+    json inbound = json::parse(BBLPrinterAgent::to_orca_payload(rack_status));
+    CHECK(inbound["print"]["device"]["nozzle"]["info"][0]["fila_id"] == petg_hf);
+    CHECK(inbound["print"]["device"]["nozzle"]["info"][1]["fila_id"] == "P22f54c9");    // user id: untouched
+
+    const std::string request = R"({"print":{"command":"get_auto_nozzle_mapping","ams_mapping":[65535,65024],)"
+                                R"("fila_info":[{"id":2,"cate":")" + petg_hf + R"(","color":"FFFFFFFF"}],)"
+                                R"("nozzle_info":[{"pos":16,"cate":")" + petg_hf + R"(","color":"FFFFFFFF"},{"pos":1,"cate":""}]}})";
+    json outbound = json::parse(BBLPrinterAgent::from_orca_payload(request));
+    CHECK(outbound["print"]["fila_info"][0]["cate"] == "GFG96");
+    CHECK(outbound["print"]["nozzle_info"][0]["cate"] == "GFG96");
+    CHECK(outbound["print"]["nozzle_info"][1]["cate"] == "");                         // empty nozzle
+    CHECK(outbound["print"]["ams_mapping"] == json::parse("[65535,65024]"));
+}