Merge branch 'main' into feat/block-install-state

2.4.0 to 2.4.2 wrote auto_drop on each build item, and 2.4.x objects
carry no auto_drop attribute in model_settings.config. The importer only
read the object attribute and treated a missing one as on, so floating
objects were dropped to the bed on load and the flag was rewritten as on
on the next save.

Record object ids with an item auto_drop="0" and use that as the fallback
when the object has no attribute. The attribute's presence is now tracked
so the fallback applies only when it is absent. Any item set to off turns
auto drop off for the object, since the flag is shared by all instances.

localization/i18n/OrcaSlicer.pot

@@ -10657,6 +10657,9 @@ msgstr ""
 msgid "Send Failed"
 msgstr ""
 
+msgid "No available printers"
+msgstr ""
+
 msgid "The name length exceeds the limit."
 msgstr ""
 

src/libslic3r/Format/bbs_3mf.cpp

@@ -988,7 +988,7 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result)
 
             MetadataList metadata;
             VolumeMetadataList volumes;
-            bool auto_drop { true };
+            std::optional<bool> auto_drop;
         };
 
         struct CutObjectInfo
@@ -1208,6 +1208,7 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result)
         //IdToGeometryMap m_orig_geometries; // backup & restore
         CurrentConfig m_curr_config;
         IdToMetadataMap m_objects_metadata;
+        std::set<int>   m_items_auto_drop_off; // object ids with a build item auto_drop="0" (2.4.x layout)
         IdToCutObjectInfoMap       m_cut_object_infos;
         IdToLayerHeightsProfileMap m_layer_heights_profiles;
         IdToLayerConfigRangesMap m_layer_config_ranges;
@@ -1463,6 +1464,7 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result)
         m_objects.clear();
         m_instances.clear();
         m_objects_metadata.clear();
+        m_items_auto_drop_off.clear();
         m_curr_metadata_name.clear();
         m_curr_characters.clear();
 
@@ -1502,6 +1504,7 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result)
         m_curr_config.object_id = -1;
         m_curr_config.volume_id = -1;
         m_objects_metadata.clear();
+        m_items_auto_drop_off.clear();
         m_layer_heights_profiles.clear();
         m_layer_config_ranges.clear();
         m_brim_ear_points.clear();
@@ -2257,11 +2260,14 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result)
             ObjectMetadata::VolumeMetadataList volumes;
             ObjectMetadata::VolumeMetadataList* volumes_ptr = nullptr;
 
+            // 2.4.x stored auto_drop on build items, shared by all instances of an object; any "off" wins
+            const bool legacy_auto_drop = !m_items_auto_drop_off.count(object.first.second);
+
             IdToMetadataMap::iterator obj_metadata = m_objects_metadata.find(object.first.second);
             if (obj_metadata != m_objects_metadata.end()) {
                 // config data has been found, this model was saved using slic3r pe
 
-                model_object->auto_drop = obj_metadata->second.auto_drop;
+                model_object->auto_drop = obj_metadata->second.auto_drop.value_or(legacy_auto_drop);
 
                 // apply object's name and config data
                 for (const Metadata& metadata : obj_metadata->second.metadata) {
@@ -2279,6 +2285,7 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result)
             }
             else {
                 // config data not found, this model was not saved using slic3r pe
+                model_object->auto_drop = legacy_auto_drop;
 
                 // add the entire geometry as the single volume to generate
                 //volumes.emplace_back(0, (int)obj_geometry->second.triangles.size() - 1);
@@ -4121,6 +4128,8 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result)
         std::string path = bbs_get_attribute_value_string(attributes, num_attributes, PPATH_ATTR);
         Transform3d transform = bbs_get_transform_from_3mf_specs_string(bbs_get_attribute_value_string(attributes, num_attributes, TRANSFORM_ATTR));
         int printable = bbs_get_attribute_value_bool(attributes, num_attributes, PRINTABLE_ATTR);
+        if (const char* auto_drop = bbs_get_attribute_value_charptr(attributes, num_attributes, AUTO_DROP_ATTR); auto_drop != nullptr && !::atoi(auto_drop))
+            m_items_auto_drop_off.insert(object_id);
         return !m_load_model || _create_object_instance(path, object_id, transform, printable, 1);
     }
 
@@ -4489,7 +4498,8 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result)
         // int instances_count_id = bbs_get_attribute_value_int(attributes, num_attributes, INSTANCESCOUNT_ATTR);
 
         ObjectMetadata metadata;
-        metadata.auto_drop = bbs_get_attribute_value_bool(attributes, num_attributes, AUTO_DROP_ATTR);
+        if (bbs_get_attribute_value_charptr(attributes, num_attributes, AUTO_DROP_ATTR) != nullptr)
+            metadata.auto_drop = bbs_get_attribute_value_bool(attributes, num_attributes, AUTO_DROP_ATTR);
         m_objects_metadata.insert({ object_id, std::move(metadata) });
         m_curr_config.object_id = object_id;
         return true;

src/libslic3r/Preset.hpp

@@ -756,7 +756,14 @@ public:
     Preset&         get_edited_preset()         { return m_edited_preset; }
     const Preset&   get_edited_preset() const   { return m_edited_preset; }
 
-    const Preset& get_selected_preset_base() const { return *get_preset_base(m_presets[m_idx_selected]); }
+    // The root of the selected preset's inherits chain, or the selected preset itself when
+    // the chain names a preset that is not loaded (e.g. a vendor that is not installed).
+    const Preset& get_selected_preset_base() const
+    {
+        const Preset &selected = m_presets[m_idx_selected];
+        const Preset *base     = get_preset_base(selected);
+        return base ? *base : selected;
+    }
 
     // Return the last saved preset.
 //  const Preset&   get_saved_preset() const { return m_saved_preset; }

src/slic3r/GUI/CreatePresetsDialog.cpp

@@ -3151,7 +3151,7 @@ void CreatePrinterPresetDialog::set_current_visible_printer()
     m_printer_name_to_preset.clear();
     for (const Preset &printer_preset : printer_presets) {
         if (!printer_preset.is_visible) continue;
-        if (preset_bundle->printers.get_preset_base(printer_preset)->name != printer_preset.name) continue;
+        if (preset_bundle->printers.get_preset_base(printer_preset) != &printer_preset) continue;
         if (auto printer_model = dynamic_cast<ConfigOptionString*>(const_cast<Preset&>(printer_preset).config.option("printer_model", false))) {
             if (m_printer_name_to_preset.find(printer_model->value) == m_printer_name_to_preset.end()) {
                 printer_choice.push_back(from_u8(printer_model->value));
@@ -4962,7 +4962,7 @@ void CreatePresetForPrinterDialog::get_visible_printer_and_compatible_filament_p
                     if (filament_preset.is_default || !filament_preset.is_compatible || filament_preset.is_project_embedded) continue;
                     ConfigOptionStrings *filament_types;
                     const Preset *       filament_preset_base = m_preset_bundle->filaments.get_preset_base(filament_preset);
-                    if (filament_preset_base == &filament_preset) {
+                    if (filament_preset_base == &filament_preset || filament_preset_base == nullptr) {
                         filament_types = dynamic_cast<ConfigOptionStrings *>(const_cast<Preset *>(&filament_preset)->config.option("filament_type"));
                     } else {
                         filament_types = dynamic_cast<ConfigOptionStrings *>(const_cast<Preset *>(filament_preset_base)->config.option("filament_type"));

src/slic3r/GUI/SelectMachine.cpp

@@ -4087,7 +4087,7 @@ void SelectMachineDialog::update_user_printer()
     {
         m_printer_last_select = "";
         update_select_layout(nullptr);
-        m_printer_box->GetPrinterComboBox()->SetTextLabel("");
+        m_printer_box->GetPrinterComboBox()->SetValue(_L("No available printers"));
     }
 
     BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << "for send task, current printer id =  " << m_printer_last_select << std::endl;

src/slic3r/GUI/SendToPrinter.cpp

@@ -1229,7 +1229,7 @@ void SendToPrinterDialog::update_user_printer()
     }
     else {
         m_printer_last_select = "";
-        m_comboBox_printer->SetTextLabel("");
+        m_comboBox_printer->SetValue(_L("No available printers"));
     }
 
     BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << "for send task, current printer id =  " << m_printer_last_select << std::endl;

src/slic3r/GUI/Widgets/ComboBox.cpp

@@ -287,7 +287,7 @@ void ComboBox::DoDeleteOneItem(unsigned int pos)
 
 void ComboBox::ForceDropdownOpen()
 {
-    if (!IsEnabled())
+    if (!IsEnabled() || items.empty())
         return;
 
     if (!drop_down) {
@@ -398,7 +398,7 @@ void ComboBox::mouseDown(wxMouseEvent &event)
     SetFocus();
     if (drop_down) {
         drop.Hide();
-    } else if (drop.HasDismissLongTime()) {
+    } else if (!items.empty() && drop.HasDismissLongTime()) { // DropDown paints nothing for an empty list
         drop.autoPosition();
         drop_down = true;
         drop.Popup(&drop);
@@ -426,7 +426,7 @@ void ComboBox::keyDown(wxKeyEvent& event)
         case WXK_SPACE:
             if (drop_down) {
                 drop.DismissAndNotify();
-            } else if (drop.HasDismissLongTime()) {
+            } else if (!items.empty() && drop.HasDismissLongTime()) {
                 drop.autoPosition();
                 drop_down = true;
                 drop.Popup();

src/slic3r/plugin/PluginAuditManager.cpp

@@ -296,16 +296,18 @@ void PluginAuditManager::add_denied_filename(const std::string& filename)
 std::vector<std::string> PluginAuditManager::default_denied_filenames()
 {
     // AppConfig::config_path() picks .conf vs .ini on the USE_JSON_CONFIG ifdef and the app key
-    // on its mode, and is a non-static member we cannot call without an instance.  Denying all
+    // on its mode, and is a non-static member we cannot call without an instance. Denying all
     // four names is cheaper and more robust than replicating that; the two unused names cost one
-    // string comparison each.  Single-sourced here so install_hook() and the tests seed from the
+    // string comparison each. Keep the plugin install-state sidecar here too: it controls which
-    // same list and cannot drift apart.
+    // packages load on startup and must remain host-managed. Single-sourced so install_hook() and
+    // the tests seed from the same list and cannot drift apart.
     return {
         SLIC3R_APP_KEY ".conf",
         GCODEVIEWER_APP_KEY ".conf",
         SLIC3R_APP_KEY ".ini",
         GCODEVIEWER_APP_KEY ".ini",
         secret_constants::USER_SECRET_FILENAME,
+        ".install_state.json",
     };
 }
 
@@ -1076,8 +1078,9 @@ void PluginAuditManager::install_hook()
     // "cert" denied-path keyword seeded below.
     add_global_allowed_root(resources_dir(), /*allow_write=*/false);
 
-    // The user's app config and cloud credentials live directly inside data_dir(), so the
+    // The user's app config and cloud credentials live directly inside data_dir(), and plugin
-    // root just granted would otherwise expose them to any plugin.  Deny them by name.
+    // install state lives beneath it, so the root just granted would otherwise expose them to
+    // plugins. Deny them by name.
     //
     // Seeded here rather than by each secret's owner because install_hook() runs during lazy
     // interpreter init and therefore provably precedes any plugin bytecode, whereas

src/slic3r/plugin/PythonInterpreter.cpp

@@ -584,6 +584,19 @@ bool PythonInterpreter::initialize()
         }
         BOOST_LOG_TRIVIAL(debug) << "Program name set successfully";
 
+        // Keep bytecode out of the Python home. The shipped .pyc files are stale against their
+        // sources, so a writable install would rewrite them inside the app (breaking a signed
+        // macOS bundle's seal) and a read-only one would recompile them on every launch.
+        const std::string pycache_prefix = data_dir() + "/python/pycache";
+#ifdef _WIN32
+        status = PyConfig_SetString(&config, &config.pycache_prefix, boost::nowide::widen(pycache_prefix).c_str());
+#else
+        status = PyConfig_SetBytesString(&config, &config.pycache_prefix, pycache_prefix.c_str());
+#endif
+        if (PyStatus_Exception(status))
+            BOOST_LOG_TRIVIAL(warning) << "Failed to set the Python bytecode cache to " << pycache_prefix << ": "
+                                       << (status.err_msg ? status.err_msg : "unknown error");
+
         // Use pybind11's scoped_interpreter which properly initializes
         // pybind11 internals for multi-threaded use — raw Py_InitializeFromConfig
         // does not set up thread state tracking that pybind11 requires.

tests/libslic3r/test_3mf.cpp

@@ -505,6 +505,28 @@ TEST_CASE("A project whose components reference themselves fails to load", "[3mf
     REQUIRE_FALSE(loaded);
 }
 
+TEST_CASE("A project in the 2.4.x layout keeps auto drop off from its build item", "[3mf][Regression]")
+{
+    // 2.4.x wrote auto_drop on the build item and left it off the object, so the object is re-laid out here.
+    ScopedTemporaryFile temp(".3mf");
+    {
+        Model        model;
+        ModelObject* object = model.add_object();
+        object->add_volume(make_cube(10., 10., 10.));
+        object->add_instance();
+        object->auto_drop = false;
+        store_project(model, temp.string(), SaveStrategy::Zip64 | SaveStrategy::Silence);
+    }
+    REQUIRE(replace_in_3mf_entry(temp.string(), "model_settings.config", " auto_drop=\"0\"", ""));
+    REQUIRE(replace_in_3mf_entry(temp.string(), "3dmodel.model", "printable=\"1\"/>", "printable=\"1\" auto_drop=\"0\"/>"));
+
+    ScopedTemporaryDir backup_dir("orca_auto_drop_dst");
+    Model              model;
+    REQUIRE(load_project(temp.string(), model, backup_dir));
+    REQUIRE(model.objects.size() == 1);
+    CHECK_FALSE(model.objects.front()->auto_drop);
+}
+
 TEST_CASE("An object loads up to the component reference budget and fails past it", "[3mf][Regression]")
 {
     // The importer queues at most 100000 component references per object. Every reference besides the

tests/libslic3r/test_preset_bundle_loading.cpp

@@ -1219,6 +1219,24 @@ TEST_CASE("find_preset2 auto-matches removed Generic vendor profiles to the libr
     CHECK(bundle.filaments.find_preset2("BrandX Generic PETG", /*auto_match=*/true) == nullptr);
 }
 
+TEST_CASE("The selected preset is its own base when its parent is not loaded", "[Preset]")
+{
+    PresetCollection printers(Preset::TYPE_PRINTER, Preset::printer_options(),
+                              static_cast<const PrintRegionConfig &>(FullPrintConfig::defaults()));
+    add_inmemory_preset(printers, "Printer");
+    add_inmemory_preset(printers, "User Printer", "Printer");
+    add_inmemory_preset(printers, "Orphan Printer", "Uninstalled Vendor Printer");
+
+    printers.select_preset_by_name("User Printer", true);
+    REQUIRE(printers.get_selected_preset_name() == "User Printer");
+    CHECK(printers.get_selected_preset_base().name == "Printer");
+
+    printers.select_preset_by_name("Orphan Printer", true);
+    REQUIRE(printers.get_selected_preset_name() == "Orphan Printer");
+    REQUIRE(printers.get_preset_base(printers.get_selected_preset()) == nullptr);
+    CHECK(printers.get_selected_preset_base().name == "Orphan Printer");
+}
+
 TEST_CASE("Renamed parent is normalized into a loaded preset's inherits", "[Preset][Rename]")
 {
     ScopedTemporaryDir   temp_dir;

tests/slic3rutils/test_moonraker_printer_agent.cpp

@@ -150,6 +150,13 @@ public:
         return m_close_frames;
     }
 
+    // The printer answers a close frame before its own read completes, so the agent's stop can return first.
+    bool wait_for_close_frames(int count)
+    {
+        std::unique_lock<std::mutex> lock(m_mutex);
+        return m_changed.wait_for(lock, 10s, [&] { return m_close_frames >= count; });
+    }
+
     // Hangs up every connection that is waiting.
     void release()
     {
@@ -277,6 +284,7 @@ private:
                 if (ec == websocket::error::closed) {
                     std::lock_guard<std::mutex> lock(m_mutex);
                     ++m_close_frames;
+                    m_changed.notify_all();
                 }
                 if (ec)
                     reading = false;
@@ -449,6 +457,7 @@ TEST_CASE("Stopping the status stream sends the printer a close frame", "[Moonra
     REQUIRE(f.printer.wait_for_ready_connections(1));
 
     CHECK(f.stops_within(3s));
+    CHECK(f.printer.wait_for_close_frames(1));
     CHECK(f.printer.close_frames() == 1);
 }
 

tests/slic3rutils/test_plugin_audit.cpp

@@ -43,7 +43,7 @@ void seed_denied_keywords()
 
 } // namespace
 
-TEST_CASE("Plugin audit denies app config and token filenames anywhere", "[audit]")
+TEST_CASE("Plugin audit denies host-managed filenames anywhere", "[audit]")
 {
     seed_denied_names();
     const PluginAuditManager& mgr = PluginAuditManager::instance();
@@ -55,6 +55,7 @@ TEST_CASE("Plugin audit denies app config and token filenames anywhere", "[audit
         CHECK(mgr.is_denied_filename(fs::path(SLIC3R_APP_KEY ".ini")));
         CHECK(mgr.is_denied_filename(fs::path(GCODEVIEWER_APP_KEY ".ini")));
         CHECK(mgr.is_denied_filename(fs::path(secret_constants::USER_SECRET_FILENAME)));
+        CHECK(mgr.is_denied_filename(fs::path(".install_state.json")));
     }
 
     SECTION("companions holding the same secrets are denied by the prefix rule")
@@ -110,6 +111,7 @@ TEST_CASE("Plugin audit deny beats allowed roots", "[audit]")
 
     const fs::path conf  = fs::path(data_dir()) / (SLIC3R_APP_KEY ".conf");
     const fs::path token = fs::path(data_dir()) / secret_constants::USER_SECRET_FILENAME;
+    const fs::path install_state = fs::path(data_dir()) / "plugins" / "example" / ".install_state.json";
 
     SECTION("a non-denied file inside the allowed root is writable (root really grants writes)")
     {
@@ -150,6 +152,17 @@ TEST_CASE("Plugin audit deny beats allowed roots", "[audit]")
         CHECK_FALSE(decision.allowed);
     }
 
+    SECTION("plugin install state is blocked for reads and writes despite the allowed root")
+    {
+        AuditDecision read_decision = mgr.check_open(install_state.string(), "r");
+        CHECK_FALSE(read_decision.allowed);
+        CHECK(read_decision.reason == "denied filename");
+
+        AuditDecision write_decision = mgr.check_open(install_state.string(), "w");
+        CHECK_FALSE(write_decision.allowed);
+        CHECK(write_decision.reason == "denied filename");
+    }
+
     SECTION("a traversal path resolving to the config is blocked")
     {
         const fs::path traversal = fs::path(data_dir()) / "plugins" / ".." / (SLIC3R_APP_KEY ".conf");

tests/slic3rutils/test_plugin_lifecycle.cpp

@@ -615,8 +615,22 @@ TEST_CASE("Python module release removes package submodules and owned sys.path",
 
     // Ensure the next import executes the new submodule rather than reusing a stale package child.
     write_package("'new'");
-    boost::system::error_code ec;
+    {
-    fs::remove_all(package_root / "__pycache__", ec);
+        // The rewrite can keep the old mtime and size, so drop the bytecode wherever the
+        // interpreter caches it.
+        PythonGILState gil;
+        REQUIRE(gil);
+        PyObjectPtr util(PyImport_ImportModule("importlib.util"));
+        REQUIRE(util);
+        for (const char* file : {"__init__.py", "sub.py"}) {
+            PyObjectPtr source(PyUnicode_DecodeFSDefault((package_root / file).string().c_str()));
+            REQUIRE(source);
+            PyObjectPtr cached(PyObject_CallMethod(util.get(), "cache_from_source", "O", source.get()));
+            REQUIRE(cached);
+            boost::system::error_code ec;
+            fs::remove(fs::path(PyUnicode_AsUTF8(cached.get())), ec);
+        }
+    }
 
     paths.clear();
     modules.clear();