Quote the job count for shellcheck (SC2086)

The top-level deps build is fixed at -j1, so one dependency compiles at a
time while the small ones leave most cores idle. -J N raises that level.

-j still applies in full to each dependency, so the worst case is -J times
-j compile jobs: ninja has no job server to share a pool across the nested
builds. Without -J nothing changes.

.github/workflows/check_profiles.yml

@@ -74,26 +74,12 @@ jobs:
           set +e
           ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2 2>&1 | tee ${{ runner.temp }}/validate_system.log
           exit ${PIPESTATUS[0]}
-      # The validator above is the nightly build of main, so it cannot slice profiles that use
-      # settings a PR adds to the engine: it reports their placeholders as undefined. A PR that
-      # changes src/ also runs Build all, whose Slice check runs this same sweep with the
-      # validator built from the PR, so the sweep below only runs for the other PRs.
-      - name: Detect engine changes
-        id: engine_changes
-        if: ${{ github.event_name == 'pull_request' }}
-        run: |
-          base=${{ github.event.pull_request.base.sha }}
-          if git fetch --no-tags --depth=1 origin "$base" && ! git diff --quiet "$base" HEAD -- src/; then
-            echo "changed=true" >> "$GITHUB_OUTPUT"
-            echo "::notice::This PR changes src/, so Build all's Slice check slices the profiles with the PR-built validator."
-          fi
       # Slice a two-colour cube through every printer, and through every system process/filament whose
       # templates no printer's own slice reaches, so every custom g-code and filename_format shipped is
       # expanded (names in {if} branches not taken included) - catches undefined-placeholder /
       # invalid-flow bugs the static checks above cannot see.
       - name: validate slice (expand custom g-code)
         id: validate_slice
-        if: ${{ steps.engine_changes.outputs.changed != 'true' }}
         continue-on-error: true
         run: |
           set +e

build_linux.sh

@@ -8,9 +8,10 @@ SCRIPT_PATH=$(dirname "$(readlink -f "${0}")")
 pushd "${SCRIPT_PATH}" > /dev/null
 
 function usage() {
-    echo "Usage: ./${SCRIPT_NAME} [-1][-b][-c][-d][-D][-e][-F][-g][-h][-i][-j N][-p][-r][-s][-t][-u][-l][-L]"
+    echo "Usage: ./${SCRIPT_NAME} [-1][-b][-c][-d][-D][-e][-F][-g][-h][-i][-j N][-J N][-p][-r][-s][-t][-u][-l][-L]"
     echo "   -1: limit builds to one core (where possible)"
     echo "   -j N: limit builds to N cores (where possible)"
+    echo "   -J N: build up to N dependencies at a time, each still using -j jobs (default: 1)"
     echo "   -b: build in Debug mode"
     echo "   -c: force a clean build"
     echo "   -C: enable ANSI-colored compile output (GNU/Clang only)"
@@ -36,12 +37,13 @@ function usage() {
 }
 
 SLIC3R_PRECOMPILED_HEADERS="ON"
+DEPS_PARALLEL=""
 
 unset name
 BUILD_DIR=build
 BUILD_CONFIG=Release
 FORWARDED_ARGS=()
-while getopts ":1j:bcCdDeFghiprstulL" opt ; do
+while getopts ":1j:J:bcCdDeFghiprstulL" opt ; do
   case ${opt} in
     1 )
         export CMAKE_BUILD_PARALLEL_LEVEL=1
@@ -51,6 +53,10 @@ while getopts ":1j:bcCdDeFghiprstulL" opt ; do
         export CMAKE_BUILD_PARALLEL_LEVEL=$OPTARG
         FORWARDED_ARGS+=("-j" "$OPTARG")
         ;;
+    J )
+        DEPS_PARALLEL=$OPTARG
+        FORWARDED_ARGS+=("-J" "$OPTARG")
+        ;;
     b )
         BUILD_DIR=build-dbg
         BUILD_CONFIG=Debug
@@ -135,6 +141,11 @@ if [[ -n "${CLEAN_DOCKER_IMAGE}" ]] && [[ -z "${USE_DOCKER}" ]] ; then
     exit 1
 fi
 
+if [[ -n "${DEPS_PARALLEL}" ]] && ! [[ "${DEPS_PARALLEL}" =~ ^[1-9][0-9]*$ ]] ; then
+    echo "Error: -J expects a positive integer."
+    exit 1
+fi
+
 function check_available_memory_and_disk() {
     FREE_MEM_GB=$(free --gibi --total | grep 'Mem' | rev | cut --delimiter=" " --fields=1 | rev)
     MIN_MEM_GB=10
@@ -537,7 +548,29 @@ if [[ -n "${BUILD_DEPS}" ]] ; then
     fi
 
     print_and_run cmake -S deps -B deps/$BUILD_DIR "${CMAKE_C_CXX_COMPILER_CLANG[@]}" "${CMAKE_LLD_LINKER_ARGS[@]}" "${CMAKE_CCACHE_ARGS[@]}" -G Ninja "${COLORED_OUTPUT}" "${BUILD_ARGS[@]}"
-    print_and_run cmake --build deps/$BUILD_DIR -j1
+    # The top-level build runs one dependency at a time by default, which keeps the console
+    # output readable and lets that dependency's own build use all of CMAKE_BUILD_PARALLEL_LEVEL.
+    # -J raises the top level instead, and -j still applies in full to every dependency, so the
+    # worst case is -J times -j compile jobs at once. Ninja has no job server to share a pool
+    # across the nested builds, so that ceiling is not enforced anywhere: pick -J to suit the RAM.
+    DEPS_JOBS=1
+    if [[ -n "${DEPS_PARALLEL}" ]] ; then
+        DEPS_JOBS=${DEPS_PARALLEL}
+        SAVED_PARALLEL_LEVEL=${CMAKE_BUILD_PARALLEL_LEVEL-}
+        export CMAKE_BUILD_PARALLEL_LEVEL=${CMAKE_BUILD_PARALLEL_LEVEL:-$(nproc)}
+        echo "Building up to ${DEPS_JOBS} dependencies at a time, ${CMAKE_BUILD_PARALLEL_LEVEL} jobs each: up to $(( DEPS_JOBS * CMAKE_BUILD_PARALLEL_LEVEL )) compile jobs at once."
+    fi
+
+    print_and_run cmake --build deps/$BUILD_DIR -j"${DEPS_JOBS}"
+
+    if [[ -n "${DEPS_PARALLEL}" ]] ; then
+        # Give the whole -j back to the OrcaSlicer build below.
+        if [[ -n "${SAVED_PARALLEL_LEVEL}" ]] ; then
+            export CMAKE_BUILD_PARALLEL_LEVEL=${SAVED_PARALLEL_LEVEL}
+        else
+            unset CMAKE_BUILD_PARALLEL_LEVEL
+        fi
+    fi
 fi
 
 if [[ -n "${BUILD_ORCA}" ]] || [[ -n "${BUILD_TESTS}" ]] ; then

deps/CGAL/CGAL.cmake

@@ -5,10 +5,10 @@ endif ()
 orcaslicer_add_cmake_project(
     CGAL
     # GIT_REPOSITORY https://github.com/CGAL/cgal.git
-    # GIT_TAG        3654f780ae0c64675cabaef0e5ddaf904c48b4b7 # releases/CGAL-5.6.3
+    # GIT_TAG        28811b671a12b5caa9e3688569dadbc6b3728fe6 # v6.2.1
     # For whatever reason, this keeps downloading forever (repeats downloads if finished)
-    URL      https://github.com/CGAL/cgal/releases/download/v5.6.3/CGAL-5.6.3.zip
+    URL      https://github.com/CGAL/cgal/releases/download/v6.2.1/CGAL-6.2.1.zip
-    URL_HASH SHA256=5d577acb4a9918ccb960491482da7a3838f8d363aff47e14d703f19fd84733d4
+    URL_HASH SHA256=eebd737d9b7f0199647ba5c1f9f6c7a3d0651aacef9c2fd4dedc52da6c25edbe
     DEPENDS dep_Boost dep_Eigen dep_GMP dep_MPFR
 )
 

deps_src/libigl/igl/copyleft/cgal/CGAL_includes.hpp

@@ -33,8 +33,8 @@
 
 // Axis-aligned bounding box tree for tet tri intersection
 #include <CGAL/AABB_tree.h>
-#include <CGAL/AABB_traits.h>
+#include <CGAL/AABB_traits_3.h>
-#include <CGAL/AABB_triangle_primitive.h>
+#include <CGAL/AABB_triangle_primitive_3.h>
 
 // Boolean operations
 #include <CGAL/Polyhedron_3.h>

deps_src/libigl/igl/copyleft/cgal/closest_facet.cpp

@@ -41,9 +41,9 @@ IGL_INLINE void igl::copyleft::cgal::closest_facet(
     const std::vector<std::vector<size_t> > & VF,
     const std::vector<std::vector<size_t> > & VFi,
     const CGAL::AABB_tree<
-      CGAL::AABB_traits<
+      CGAL::AABB_traits_3<
         Kernel, 
-        CGAL::AABB_triangle_primitive<
+        CGAL::AABB_triangle_primitive_3<
           Kernel, typename std::vector<
             typename Kernel::Triangle_3 >::iterator > > > & tree,
     const std::vector<typename Kernel::Triangle_3 > & triangles,
@@ -56,8 +56,8 @@ IGL_INLINE void igl::copyleft::cgal::closest_facet(
   typedef typename Kernel::Segment_3 Segment_3;
   typedef typename Kernel::Triangle_3 Triangle;
   typedef typename std::vector<Triangle>::iterator Iterator;
-  typedef typename CGAL::AABB_triangle_primitive<Kernel, Iterator> Primitive;
+  typedef typename CGAL::AABB_triangle_primitive_3<Kernel, Iterator> Primitive;
-  typedef typename CGAL::AABB_traits<Kernel, Primitive> AABB_triangle_traits;
+  typedef typename CGAL::AABB_traits_3<Kernel, Primitive> AABB_triangle_traits;
   typedef typename CGAL::AABB_tree<AABB_triangle_traits> Tree;
 
   if (F.rows() <= 0 || I.rows() <= 0) {
@@ -451,8 +451,8 @@ IGL_INLINE void igl::copyleft::cgal::closest_facet(
   typedef CGAL::Exact_predicates_exact_constructions_kernel Kernel;
   typedef Kernel::Triangle_3 Triangle;
   typedef std::vector<Triangle>::iterator Iterator;
-  typedef CGAL::AABB_triangle_primitive<Kernel, Iterator> Primitive;
+  typedef CGAL::AABB_triangle_primitive_3<Kernel, Iterator> Primitive;
-  typedef CGAL::AABB_traits<Kernel, Primitive> AABB_triangle_traits;
+  typedef CGAL::AABB_traits_3<Kernel, Primitive> AABB_triangle_traits;
   typedef CGAL::AABB_tree<AABB_triangle_traits> Tree;
 
   if (F.rows() <= 0 || I.rows() <= 0) {
@@ -498,9 +498,9 @@ IGL_INLINE void igl::copyleft::cgal::closest_facet(
 #ifdef IGL_STATIC_LIBRARY
 // Explicit template instantiation
 // generated by autoexplicit.sh
-template void igl::copyleft::cgal::closest_facet<Eigen::Matrix<CGAL::Epeck::FT, -1, -1, 1, -1, -1>, Eigen::Matrix<int, -1, -1, 0, -1, -1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<CGAL::Epeck::FT, -1, 3, 1, -1, 3>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, CGAL::Epeck, Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>>(Eigen::MatrixBase<Eigen::Matrix<CGAL::Epeck::FT, -1, -1, 1, -1, -1>> const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, -1, 0, -1, -1>> const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1>> const&, Eigen::MatrixBase<Eigen::Matrix<CGAL::Epeck::FT, -1, 3, 1, -1, 3>> const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1>> const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1>> const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1>> const&, std::vector<std::vector<size_t, std::allocator<size_t>>, std::allocator<std::vector<size_t, std::allocator<size_t>>>> const&, std::vector<std::vector<size_t, std::allocator<size_t>>, std::allocator<std::vector<size_t, std::allocator<size_t>>>> const&, CGAL::AABB_tree<CGAL::AABB_traits<CGAL::Epeck, CGAL::AABB_triangle_primitive<CGAL::Epeck, std::vector<CGAL::Epeck::Triangle_3, std::allocator<CGAL::Epeck::Triangle_3>>::iterator, CGAL::Boolean_tag<false>>, CGAL::Default>> const&, std::vector<CGAL::Epeck::Triangle_3, std::allocator<CGAL::Epeck::Triangle_3>> const&, std::vector<bool, std::allocator<bool>> const&, Eigen::PlainObjectBase<Eigen::Matrix<int, -1, 1, 0, -1, 1>>&, Eigen::PlainObjectBase<Eigen::Matrix<int, -1, 1, 0, -1, 1>>&);
+template void igl::copyleft::cgal::closest_facet<Eigen::Matrix<CGAL::Epeck::FT, -1, -1, 1, -1, -1>, Eigen::Matrix<int, -1, -1, 0, -1, -1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<CGAL::Epeck::FT, -1, 3, 1, -1, 3>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, CGAL::Epeck, Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>>(Eigen::MatrixBase<Eigen::Matrix<CGAL::Epeck::FT, -1, -1, 1, -1, -1>> const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, -1, 0, -1, -1>> const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1>> const&, Eigen::MatrixBase<Eigen::Matrix<CGAL::Epeck::FT, -1, 3, 1, -1, 3>> const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1>> const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1>> const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1>> const&, std::vector<std::vector<size_t, std::allocator<size_t>>, std::allocator<std::vector<size_t, std::allocator<size_t>>>> const&, std::vector<std::vector<size_t, std::allocator<size_t>>, std::allocator<std::vector<size_t, std::allocator<size_t>>>> const&, CGAL::AABB_tree<CGAL::AABB_traits_3<CGAL::Epeck, CGAL::AABB_triangle_primitive_3<CGAL::Epeck, std::vector<CGAL::Epeck::Triangle_3, std::allocator<CGAL::Epeck::Triangle_3>>::iterator, CGAL::Boolean_tag<false>>, CGAL::Default>> const&, std::vector<CGAL::Epeck::Triangle_3, std::allocator<CGAL::Epeck::Triangle_3>> const&, std::vector<bool, std::allocator<bool>> const&, Eigen::PlainObjectBase<Eigen::Matrix<int, -1, 1, 0, -1, 1>>&, Eigen::PlainObjectBase<Eigen::Matrix<int, -1, 1, 0, -1, 1>>&);
 // generated by autoexplicit.sh
-template void igl::copyleft::cgal::closest_facet<Eigen::Matrix<CGAL::Epeck::FT, -1, -1, 0, -1, -1>, Eigen::Matrix<int, -1, -1, 0, -1, -1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<CGAL::Epeck::FT, -1, 3, 0, -1, 3>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, CGAL::Epeck, Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>>(Eigen::MatrixBase<Eigen::Matrix<CGAL::Epeck::FT, -1, -1, 0, -1, -1>> const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, -1, 0, -1, -1>> const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1>> const&, Eigen::MatrixBase<Eigen::Matrix<CGAL::Epeck::FT, -1, 3, 0, -1, 3>> const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1>> const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1>> const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1>> const&, std::vector<std::vector<size_t, std::allocator<size_t>>, std::allocator<std::vector<size_t, std::allocator<size_t>>>> const&, std::vector<std::vector<size_t, std::allocator<size_t>>, std::allocator<std::vector<size_t, std::allocator<size_t>>>> const&, CGAL::AABB_tree<CGAL::AABB_traits<CGAL::Epeck, CGAL::AABB_triangle_primitive<CGAL::Epeck, std::vector<CGAL::Epeck::Triangle_3, std::allocator<CGAL::Epeck::Triangle_3>>::iterator, CGAL::Boolean_tag<false>>, CGAL::Default>> const&, std::vector<CGAL::Epeck::Triangle_3, std::allocator<CGAL::Epeck::Triangle_3>> const&, std::vector<bool, std::allocator<bool>> const&, Eigen::PlainObjectBase<Eigen::Matrix<int, -1, 1, 0, -1, 1>>&, Eigen::PlainObjectBase<Eigen::Matrix<int, -1, 1, 0, -1, 1>>&);
+template void igl::copyleft::cgal::closest_facet<Eigen::Matrix<CGAL::Epeck::FT, -1, -1, 0, -1, -1>, Eigen::Matrix<int, -1, -1, 0, -1, -1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<CGAL::Epeck::FT, -1, 3, 0, -1, 3>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, CGAL::Epeck, Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>>(Eigen::MatrixBase<Eigen::Matrix<CGAL::Epeck::FT, -1, -1, 0, -1, -1>> const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, -1, 0, -1, -1>> const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1>> const&, Eigen::MatrixBase<Eigen::Matrix<CGAL::Epeck::FT, -1, 3, 0, -1, 3>> const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1>> const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1>> const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1>> const&, std::vector<std::vector<size_t, std::allocator<size_t>>, std::allocator<std::vector<size_t, std::allocator<size_t>>>> const&, std::vector<std::vector<size_t, std::allocator<size_t>>, std::allocator<std::vector<size_t, std::allocator<size_t>>>> const&, CGAL::AABB_tree<CGAL::AABB_traits_3<CGAL::Epeck, CGAL::AABB_triangle_primitive_3<CGAL::Epeck, std::vector<CGAL::Epeck::Triangle_3, std::allocator<CGAL::Epeck::Triangle_3>>::iterator, CGAL::Boolean_tag<false>>, CGAL::Default>> const&, std::vector<CGAL::Epeck::Triangle_3, std::allocator<CGAL::Epeck::Triangle_3>> const&, std::vector<bool, std::allocator<bool>> const&, Eigen::PlainObjectBase<Eigen::Matrix<int, -1, 1, 0, -1, 1>>&, Eigen::PlainObjectBase<Eigen::Matrix<int, -1, 1, 0, -1, 1>>&);
 // generated by autoexplicit.sh
 template void igl::copyleft::cgal::closest_facet<Eigen::Matrix<CGAL::Epeck::FT, -1, -1, 1, -1, -1>, Eigen::Matrix<int, -1, -1, 0, -1, -1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<CGAL::Epeck::FT, -1, -1, 1, -1, -1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, CGAL::Epeck, Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<int, -1, 1, 0, -1, 1> >(
     Eigen::MatrixBase<Eigen::Matrix<CGAL::Epeck::FT, -1, -1, 1, -1, -1> > const&, 
@@ -509,7 +509,7 @@ template void igl::copyleft::cgal::closest_facet<Eigen::Matrix<CGAL::Epeck::FT,
     Eigen::MatrixBase<Eigen::Matrix<CGAL::Epeck::FT, -1, -1, 1, -1, -1> > const&, 
     Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1> > const&, 
     Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1> > const&, 
-    Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1> > const&, std::vector<std::vector<size_t, std::allocator<size_t> >, std::allocator<std::vector<size_t, std::allocator<size_t> > > > const&, std::vector<std::vector<size_t, std::allocator<size_t> >, std::allocator<std::vector<size_t, std::allocator<size_t> > > > const&, CGAL::AABB_tree<CGAL::AABB_traits<CGAL::Epeck, CGAL::AABB_triangle_primitive<CGAL::Epeck, std::vector<CGAL::Epeck::Triangle_3, std::allocator<CGAL::Epeck::Triangle_3> >::iterator, CGAL::Boolean_tag<false> >, CGAL::Default> > const&, std::vector<CGAL::Epeck::Triangle_3, std::allocator<CGAL::Epeck::Triangle_3> > const&, std::vector<bool, std::allocator<bool> > const&, Eigen::PlainObjectBase<Eigen::Matrix<int, -1, 1, 0, -1, 1> >&, Eigen::PlainObjectBase<Eigen::Matrix<int, -1, 1, 0, -1, 1> >&);
+    Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1> > const&, std::vector<std::vector<size_t, std::allocator<size_t> >, std::allocator<std::vector<size_t, std::allocator<size_t> > > > const&, std::vector<std::vector<size_t, std::allocator<size_t> >, std::allocator<std::vector<size_t, std::allocator<size_t> > > > const&, CGAL::AABB_tree<CGAL::AABB_traits_3<CGAL::Epeck, CGAL::AABB_triangle_primitive_3<CGAL::Epeck, std::vector<CGAL::Epeck::Triangle_3, std::allocator<CGAL::Epeck::Triangle_3> >::iterator, CGAL::Boolean_tag<false> >, CGAL::Default> > const&, std::vector<CGAL::Epeck::Triangle_3, std::allocator<CGAL::Epeck::Triangle_3> > const&, std::vector<bool, std::allocator<bool> > const&, Eigen::PlainObjectBase<Eigen::Matrix<int, -1, 1, 0, -1, 1> >&, Eigen::PlainObjectBase<Eigen::Matrix<int, -1, 1, 0, -1, 1> >&);
 #include <cstdint>
 template void igl::copyleft::cgal::closest_facet<Eigen::Matrix<CGAL::Epeck::FT, -1, -1, 0, -1, -1>, Eigen::Matrix<int, -1, -1, 0, -1, -1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<CGAL::Epeck::FT, -1, -1, 0, -1, -1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, CGAL::Epeck, Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<int, -1, 1, 0, -1, 1> >(
 Eigen::MatrixBase<Eigen::Matrix<CGAL::Epeck::FT, -1, -1, 0, -1, -1> > const&, 
@@ -518,7 +518,7 @@ Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1> > const&,
 Eigen::MatrixBase<Eigen::Matrix<CGAL::Epeck::FT, -1, -1, 0, -1, -1> > const&, 
 Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1> > const&, 
 Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1> > const&, 
-Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1> > const&, std::vector<std::vector<size_t, std::allocator<size_t> >, std::allocator<std::vector<size_t, std::allocator<size_t> > > > const&, std::vector<std::vector<size_t, std::allocator<size_t> >, std::allocator<std::vector<size_t, std::allocator<size_t> > > > const&, CGAL::AABB_tree<CGAL::AABB_traits<CGAL::Epeck, CGAL::AABB_triangle_primitive<CGAL::Epeck, std::vector<CGAL::Epeck::Triangle_3, std::allocator<CGAL::Epeck::Triangle_3> >::iterator, CGAL::Boolean_tag<false> >, CGAL::Default> > const&, std::vector<CGAL::Epeck::Triangle_3, std::allocator<CGAL::Epeck::Triangle_3> > const&, std::vector<bool, std::allocator<bool> > const&, 
+Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1> > const&, std::vector<std::vector<size_t, std::allocator<size_t> >, std::allocator<std::vector<size_t, std::allocator<size_t> > > > const&, std::vector<std::vector<size_t, std::allocator<size_t> >, std::allocator<std::vector<size_t, std::allocator<size_t> > > > const&, CGAL::AABB_tree<CGAL::AABB_traits_3<CGAL::Epeck, CGAL::AABB_triangle_primitive_3<CGAL::Epeck, std::vector<CGAL::Epeck::Triangle_3, std::allocator<CGAL::Epeck::Triangle_3> >::iterator, CGAL::Boolean_tag<false> >, CGAL::Default> > const&, std::vector<CGAL::Epeck::Triangle_3, std::allocator<CGAL::Epeck::Triangle_3> > const&, std::vector<bool, std::allocator<bool> > const&, 
 Eigen::PlainObjectBase<Eigen::Matrix<int, -1, 1, 0, -1, 1> >&, 
 Eigen::PlainObjectBase<Eigen::Matrix<int, -1, 1, 0, -1, 1> >&);
 

deps_src/libigl/igl/copyleft/cgal/closest_facet.h

@@ -14,8 +14,8 @@
 #include <vector>
 
 #include <CGAL/AABB_tree.h>
-#include <CGAL/AABB_traits.h>
+#include <CGAL/AABB_traits_3.h>
-#include <CGAL/AABB_triangle_primitive.h>
+#include <CGAL/AABB_triangle_primitive_3.h>
 #include <CGAL/intersections.h>
 #include <CGAL/Exact_predicates_exact_constructions_kernel.h>
 
@@ -67,9 +67,9 @@ namespace igl
           const std::vector<std::vector<size_t> > & VF,
           const std::vector<std::vector<size_t> > & VFi,
           const CGAL::AABB_tree<
-            CGAL::AABB_traits<
+            CGAL::AABB_traits_3<
               Kernel, 
-              CGAL::AABB_triangle_primitive<
+              CGAL::AABB_triangle_primitive_3<
                 Kernel, typename std::vector<
                   typename Kernel::Triangle_3 >::iterator > > > & tree,
           const std::vector<typename Kernel::Triangle_3 > & triangles,
@@ -139,9 +139,9 @@ namespace igl
           const std::vector<std::vector<size_t> > & VF,
           const std::vector<std::vector<size_t> > & VFi,
           const CGAL::AABB_tree<
-            CGAL::AABB_traits<
+            CGAL::AABB_traits_3<
               Kernel, 
-              CGAL::AABB_triangle_primitive<
+              CGAL::AABB_triangle_primitive_3<
                 Kernel, typename std::vector<
                   typename Kernel::Triangle_3 >::iterator > > > & tree,
           const std::vector<typename Kernel::Triangle_3 > & triangles,

deps_src/libigl/igl/copyleft/cgal/component_inside_component.cpp

@@ -12,8 +12,8 @@
 #include "points_inside_component.h"
 
 #include <CGAL/AABB_tree.h>
-#include <CGAL/AABB_traits.h>
+#include <CGAL/AABB_traits_3.h>
-#include <CGAL/AABB_triangle_primitive.h>
+#include <CGAL/AABB_triangle_primitive_3.h>
 #include <CGAL/Exact_predicates_exact_constructions_kernel.h>
 
 #include <cassert>

deps_src/libigl/igl/copyleft/cgal/extract_cells.cpp

@@ -23,8 +23,8 @@
 #include "../../vertex_triangle_adjacency.h"
 
 #include <CGAL/AABB_tree.h>
-#include <CGAL/AABB_traits.h>
+#include <CGAL/AABB_traits_3.h>
-#include <CGAL/AABB_triangle_primitive.h>
+#include <CGAL/AABB_triangle_primitive_3.h>
 #include <CGAL/intersections.h>
 #include <CGAL/Exact_predicates_exact_constructions_kernel.h>
 
@@ -156,9 +156,9 @@ IGL_INLINE size_t igl::copyleft::cgal::extract_cells(
   std::vector<VectorXI> Is(num_components);
   std::vector<
     CGAL::AABB_tree<
-      CGAL::AABB_traits<
+      CGAL::AABB_traits_3<
         Kernel,
-        CGAL::AABB_triangle_primitive<
+        CGAL::AABB_triangle_primitive_3<
           Kernel, std::vector<
             Kernel::Triangle_3 >::iterator > > > > trees(num_components);
   std::vector< std::vector<Kernel::Triangle_3 > >

deps_src/libigl/igl/copyleft/cgal/hausdorff.cpp

@@ -9,8 +9,8 @@ template <
 IGL_INLINE void igl::copyleft::cgal::hausdorff(
   const Eigen::MatrixBase<DerivedV>& V,
   const CGAL::AABB_tree<
-    CGAL::AABB_traits<Kernel, 
+    CGAL::AABB_traits_3<Kernel, 
-      CGAL::AABB_triangle_primitive<Kernel, 
+      CGAL::AABB_triangle_primitive_3<Kernel, 
         typename std::vector<CGAL::Triangle_3<Kernel> >::iterator
       >
     >
@@ -27,8 +27,8 @@ IGL_INLINE void igl::copyleft::cgal::hausdorff(
   {
     CGAL::Point_3<Kernel> query(x,y,z);
     typename CGAL::AABB_tree<
-      CGAL::AABB_traits<Kernel, 
+      CGAL::AABB_traits_3<Kernel, 
-        CGAL::AABB_triangle_primitive<Kernel, 
+        CGAL::AABB_triangle_primitive_3<Kernel, 
           typename std::vector<CGAL::Triangle_3<Kernel> >::iterator
         >
       >
@@ -41,5 +41,5 @@ IGL_INLINE void igl::copyleft::cgal::hausdorff(
 #ifdef IGL_STATIC_LIBRARY
 // Explicit template instantiation
 // generated by autoexplicit.sh
-template void igl::copyleft::cgal::hausdorff<Eigen::Matrix<double, -1, -1, 0, -1, -1>, CGAL::Simple_cartesian<double>, double>(Eigen::MatrixBase<Eigen::Matrix<double, -1, -1, 0, -1, -1> > const&, CGAL::AABB_tree<CGAL::AABB_traits<CGAL::Simple_cartesian<double>, CGAL::AABB_triangle_primitive<CGAL::Simple_cartesian<double>, std::vector<CGAL::Triangle_3<CGAL::Simple_cartesian<double> >, std::allocator<CGAL::Triangle_3<CGAL::Simple_cartesian<double> > > >::iterator, CGAL::Boolean_tag<false> >, CGAL::Default> > const&, std::vector<CGAL::Triangle_3<CGAL::Simple_cartesian<double> >, std::allocator<CGAL::Triangle_3<CGAL::Simple_cartesian<double> > > > const&, double&, double&);
+template void igl::copyleft::cgal::hausdorff<Eigen::Matrix<double, -1, -1, 0, -1, -1>, CGAL::Simple_cartesian<double>, double>(Eigen::MatrixBase<Eigen::Matrix<double, -1, -1, 0, -1, -1> > const&, CGAL::AABB_tree<CGAL::AABB_traits_3<CGAL::Simple_cartesian<double>, CGAL::AABB_triangle_primitive_3<CGAL::Simple_cartesian<double>, std::vector<CGAL::Triangle_3<CGAL::Simple_cartesian<double> >, std::allocator<CGAL::Triangle_3<CGAL::Simple_cartesian<double> > > >::iterator, CGAL::Boolean_tag<false> >, CGAL::Default> > const&, std::vector<CGAL::Triangle_3<CGAL::Simple_cartesian<double> >, std::allocator<CGAL::Triangle_3<CGAL::Simple_cartesian<double> > > > const&, double&, double&);
 #endif

deps_src/libigl/igl/copyleft/cgal/hausdorff.h

@@ -38,8 +38,8 @@ namespace igl
       IGL_INLINE void hausdorff(
         const Eigen::MatrixBase<DerivedV>& V,
         const CGAL::AABB_tree<
-          CGAL::AABB_traits<Kernel, 
+          CGAL::AABB_traits_3<Kernel, 
-            CGAL::AABB_triangle_primitive<Kernel, 
+            CGAL::AABB_triangle_primitive_3<Kernel, 
               typename std::vector<CGAL::Triangle_3<Kernel> >::iterator
             >
           >

deps_src/libigl/igl/copyleft/cgal/outer_hull.cpp

@@ -12,8 +12,8 @@
 #include "../../remove_unreferenced.h"
 
 #include <CGAL/AABB_tree.h>
-#include <CGAL/AABB_traits.h>
+#include <CGAL/AABB_traits_3.h>
-#include <CGAL/AABB_triangle_primitive.h>
+#include <CGAL/AABB_triangle_primitive_3.h>
 #include <CGAL/intersections.h>
 #include <CGAL/Exact_predicates_exact_constructions_kernel.h>
 

deps_src/libigl/igl/copyleft/cgal/outer_hull_legacy.cpp

@@ -12,8 +12,8 @@
 #include "../../remove_unreferenced.h"
 
 #include <CGAL/AABB_tree.h>
-#include <CGAL/AABB_traits.h>
+#include <CGAL/AABB_traits_3.h>
-#include <CGAL/AABB_triangle_primitive.h>
+#include <CGAL/AABB_triangle_primitive_3.h>
 #include <CGAL/intersections.h>
 #include <CGAL/Exact_predicates_exact_constructions_kernel.h>
 

deps_src/libigl/igl/copyleft/cgal/point_mesh_squared_distance.cpp

@@ -29,8 +29,8 @@ IGL_INLINE void igl::copyleft::cgal::point_mesh_squared_distance(
   using namespace std;
   typedef CGAL::Triangle_3<Kernel> Triangle_3; 
   typedef typename std::vector<Triangle_3>::iterator Iterator;
-  typedef CGAL::AABB_triangle_primitive<Kernel, Iterator> Primitive;
+  typedef CGAL::AABB_triangle_primitive_3<Kernel, Iterator> Primitive;
-  typedef CGAL::AABB_traits<Kernel, Primitive> AABB_triangle_traits;
+  typedef CGAL::AABB_traits_3<Kernel, Primitive> AABB_triangle_traits;
   typedef CGAL::AABB_tree<AABB_triangle_traits> Tree;
   Tree tree;
   vector<Triangle_3> T;
@@ -43,8 +43,8 @@ IGL_INLINE void igl::copyleft::cgal::point_mesh_squared_distance_precompute(
   const Eigen::MatrixBase<DerivedV> & V,
   const Eigen::MatrixBase<DerivedF> & F,
   CGAL::AABB_tree<
-    CGAL::AABB_traits<Kernel, 
+    CGAL::AABB_traits_3<Kernel, 
-      CGAL::AABB_triangle_primitive<Kernel, 
+      CGAL::AABB_triangle_primitive_3<Kernel, 
         typename std::vector<CGAL::Triangle_3<Kernel> >::iterator
       >
     >
@@ -90,8 +90,8 @@ template <
 IGL_INLINE void igl::copyleft::cgal::point_mesh_squared_distance(
   const Eigen::MatrixBase<DerivedP> & P,
   const CGAL::AABB_tree<
-    CGAL::AABB_traits<Kernel, 
+    CGAL::AABB_traits_3<Kernel, 
-      CGAL::AABB_triangle_primitive<Kernel, 
+      CGAL::AABB_triangle_primitive_3<Kernel, 
         typename std::vector<CGAL::Triangle_3<Kernel> >::iterator
       >
     >
@@ -103,8 +103,8 @@ IGL_INLINE void igl::copyleft::cgal::point_mesh_squared_distance(
 {
   typedef CGAL::Triangle_3<Kernel> Triangle_3; 
   typedef typename std::vector<Triangle_3>::iterator Iterator;
-  typedef CGAL::AABB_triangle_primitive<Kernel, Iterator> Primitive;
+  typedef CGAL::AABB_triangle_primitive_3<Kernel, Iterator> Primitive;
-  typedef CGAL::AABB_traits<Kernel, Primitive> AABB_triangle_traits;
+  typedef CGAL::AABB_traits_3<Kernel, Primitive> AABB_triangle_traits;
   typedef CGAL::AABB_tree<AABB_triangle_traits> Tree;
   typedef typename Tree::Point_and_primitive_id Point_and_primitive_id;
   typedef CGAL::Point_3<Kernel>    Point_3;
@@ -134,7 +134,7 @@ IGL_INLINE void igl::copyleft::cgal::point_mesh_squared_distance(
 template void igl::copyleft::cgal::point_mesh_squared_distance<CGAL::Epeck, Eigen::Matrix<CGAL::Epeck::FT, -1, 3, 0, -1, 3>, Eigen::Matrix<double, -1, -1, 0, -1, -1>, Eigen::Matrix<int, -1, -1, 0, -1, -1>, Eigen::Matrix<CGAL::Epeck::FT, -1, 1, 0, -1, 1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<double, -1, 1, 0, -1, 1>>(Eigen::MatrixBase<Eigen::Matrix<CGAL::Epeck::FT, -1, 3, 0, -1, 3>> const&, Eigen::MatrixBase<Eigen::Matrix<double, -1, -1, 0, -1, -1>> const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, -1, 0, -1, -1>> const&, Eigen::PlainObjectBase<Eigen::Matrix<CGAL::Epeck::FT, -1, 1, 0, -1, 1>>&, Eigen::PlainObjectBase<Eigen::Matrix<int, -1, 1, 0, -1, 1>>&, Eigen::PlainObjectBase<Eigen::Matrix<double, -1, 1, 0, -1, 1>>&);
 template void igl::copyleft::cgal::point_mesh_squared_distance<CGAL::Epeck,   Eigen::Matrix<CGAL::Epeck::FT, -1, 3, 0, -1, 3>,   Eigen::Matrix<double, -1, -1, 0, -1, -1>, Eigen::Matrix<int, -1, -1, 0, -1,   -1>, Eigen::Matrix<CGAL::Epeck::FT, -1, 1, 0, -1, 1>,   Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<double, -1, -1, 0, -1, -1>   >(Eigen::MatrixBase<Eigen::Matrix<CGAL::Epeck::FT, -1, 3,   0, -1, 3> > const&, Eigen::MatrixBase<Eigen::Matrix<double, -1, -1, 0,   -1, -1> > const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, -1, 0, -1, -1>   > const&,   Eigen::PlainObjectBase<Eigen::Matrix<CGAL::Epeck::FT, -1, 1,   0, -1, 1> >&, Eigen::PlainObjectBase<Eigen::Matrix<int, -1, 1, 0, -1, 1> >&,   Eigen::PlainObjectBase<Eigen::Matrix<double, -1, -1, 0, -1, -1> >&);
 template void igl::copyleft::cgal::point_mesh_squared_distance<CGAL::Epeck, Eigen::Matrix<double, -1, -1, 0, -1, -1>, Eigen::Matrix<double, -1, -1, 0, -1, -1>, Eigen::Matrix<int, -1, -1, 0, -1, -1>, Eigen::Matrix<double, -1, 1, 0, -1, 1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<double, -1, -1, 0, -1, -1> >(Eigen::MatrixBase<Eigen::Matrix<double, -1, -1, 0, -1, -1> > const&, Eigen::MatrixBase<Eigen::Matrix<double, -1, -1, 0, -1, -1> > const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, -1, 0, -1, -1> > const&, Eigen::PlainObjectBase<Eigen::Matrix<double, -1, 1, 0, -1, 1> >&, Eigen::PlainObjectBase<Eigen::Matrix<int, -1, 1, 0, -1, 1> >&, Eigen::PlainObjectBase<Eigen::Matrix<double, -1, -1, 0, -1, -1> >&);
-template void igl::copyleft::cgal::point_mesh_squared_distance<CGAL::Simple_cartesian<double>, Eigen::Matrix<double, -1, 3, 1, -1, 3>, Eigen::Matrix<double, -1, 1, 0, -1, 1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<double, -1, 3, 1, -1, 3> >(Eigen::MatrixBase<Eigen::Matrix<double, -1, 3, 1, -1, 3> > const&, CGAL::AABB_tree<CGAL::AABB_traits<CGAL::Simple_cartesian<double>, CGAL::AABB_triangle_primitive<CGAL::Simple_cartesian<double>, std::vector<CGAL::Triangle_3<CGAL::Simple_cartesian<double> >, std::allocator<CGAL::Triangle_3<CGAL::Simple_cartesian<double> > > >::iterator, CGAL::Boolean_tag<false> >, CGAL::Default> > const&, std::vector<CGAL::Triangle_3<CGAL::Simple_cartesian<double> >, std::allocator<CGAL::Triangle_3<CGAL::Simple_cartesian<double> > > > const&, Eigen::PlainObjectBase<Eigen::Matrix<double, -1, 1, 0, -1, 1> >&, Eigen::PlainObjectBase<Eigen::Matrix<int, -1, 1, 0, -1, 1> >&, Eigen::PlainObjectBase<Eigen::Matrix<double, -1, 3, 1, -1, 3> >&);
+template void igl::copyleft::cgal::point_mesh_squared_distance<CGAL::Simple_cartesian<double>, Eigen::Matrix<double, -1, 3, 1, -1, 3>, Eigen::Matrix<double, -1, 1, 0, -1, 1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, Eigen::Matrix<double, -1, 3, 1, -1, 3> >(Eigen::MatrixBase<Eigen::Matrix<double, -1, 3, 1, -1, 3> > const&, CGAL::AABB_tree<CGAL::AABB_traits_3<CGAL::Simple_cartesian<double>, CGAL::AABB_triangle_primitive_3<CGAL::Simple_cartesian<double>, std::vector<CGAL::Triangle_3<CGAL::Simple_cartesian<double> >, std::allocator<CGAL::Triangle_3<CGAL::Simple_cartesian<double> > > >::iterator, CGAL::Boolean_tag<false> >, CGAL::Default> > const&, std::vector<CGAL::Triangle_3<CGAL::Simple_cartesian<double> >, std::allocator<CGAL::Triangle_3<CGAL::Simple_cartesian<double> > > > const&, Eigen::PlainObjectBase<Eigen::Matrix<double, -1, 1, 0, -1, 1> >&, Eigen::PlainObjectBase<Eigen::Matrix<int, -1, 1, 0, -1, 1> >&, Eigen::PlainObjectBase<Eigen::Matrix<double, -1, 3, 1, -1, 3> >&);
-template void igl::copyleft::cgal::point_mesh_squared_distance_precompute<CGAL::Simple_cartesian<double>, Eigen::Matrix<double, -1, -1, 0, -1, -1>, Eigen::Matrix<int, -1, -1, 0, -1, -1> >(Eigen::MatrixBase<Eigen::Matrix<double, -1, -1, 0, -1, -1> > const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, -1, 0, -1, -1> > const&, CGAL::AABB_tree<CGAL::AABB_traits<CGAL::Simple_cartesian<double>, CGAL::AABB_triangle_primitive<CGAL::Simple_cartesian<double>, std::vector<CGAL::Triangle_3<CGAL::Simple_cartesian<double> >, std::allocator<CGAL::Triangle_3<CGAL::Simple_cartesian<double> > > >::iterator, CGAL::Boolean_tag<false> >, CGAL::Default> >&, std::vector<CGAL::Triangle_3<CGAL::Simple_cartesian<double> >, std::allocator<CGAL::Triangle_3<CGAL::Simple_cartesian<double> > > >&);
+template void igl::copyleft::cgal::point_mesh_squared_distance_precompute<CGAL::Simple_cartesian<double>, Eigen::Matrix<double, -1, -1, 0, -1, -1>, Eigen::Matrix<int, -1, -1, 0, -1, -1> >(Eigen::MatrixBase<Eigen::Matrix<double, -1, -1, 0, -1, -1> > const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, -1, 0, -1, -1> > const&, CGAL::AABB_tree<CGAL::AABB_traits_3<CGAL::Simple_cartesian<double>, CGAL::AABB_triangle_primitive_3<CGAL::Simple_cartesian<double>, std::vector<CGAL::Triangle_3<CGAL::Simple_cartesian<double> >, std::allocator<CGAL::Triangle_3<CGAL::Simple_cartesian<double> > > >::iterator, CGAL::Boolean_tag<false> >, CGAL::Default> >&, std::vector<CGAL::Triangle_3<CGAL::Simple_cartesian<double> >, std::allocator<CGAL::Triangle_3<CGAL::Simple_cartesian<double> > > >&);
-template void igl::copyleft::cgal::point_mesh_squared_distance_precompute<CGAL::Simple_cartesian<double>, Eigen::Matrix<double, -1, 3, 1, -1, 3>, Eigen::Matrix<int, -1, -1, 0, -1, -1> >(Eigen::MatrixBase<Eigen::Matrix<double, -1, 3, 1, -1, 3> > const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, -1, 0, -1, -1> > const&, CGAL::AABB_tree<CGAL::AABB_traits<CGAL::Simple_cartesian<double>, CGAL::AABB_triangle_primitive<CGAL::Simple_cartesian<double>, std::vector<CGAL::Triangle_3<CGAL::Simple_cartesian<double> >, std::allocator<CGAL::Triangle_3<CGAL::Simple_cartesian<double> > > >::iterator, CGAL::Boolean_tag<false> >, CGAL::Default> >&, std::vector<CGAL::Triangle_3<CGAL::Simple_cartesian<double> >, std::allocator<CGAL::Triangle_3<CGAL::Simple_cartesian<double> > > >&);
+template void igl::copyleft::cgal::point_mesh_squared_distance_precompute<CGAL::Simple_cartesian<double>, Eigen::Matrix<double, -1, 3, 1, -1, 3>, Eigen::Matrix<int, -1, -1, 0, -1, -1> >(Eigen::MatrixBase<Eigen::Matrix<double, -1, 3, 1, -1, 3> > const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, -1, 0, -1, -1> > const&, CGAL::AABB_tree<CGAL::AABB_traits_3<CGAL::Simple_cartesian<double>, CGAL::AABB_triangle_primitive_3<CGAL::Simple_cartesian<double>, std::vector<CGAL::Triangle_3<CGAL::Simple_cartesian<double> >, std::allocator<CGAL::Triangle_3<CGAL::Simple_cartesian<double> > > >::iterator, CGAL::Boolean_tag<false> >, CGAL::Default> >&, std::vector<CGAL::Triangle_3<CGAL::Simple_cartesian<double> >, std::allocator<CGAL::Triangle_3<CGAL::Simple_cartesian<double> > > >&);
 #endif

deps_src/libigl/igl/copyleft/cgal/point_mesh_squared_distance.h

@@ -63,8 +63,8 @@ namespace igl
         const Eigen::MatrixBase<DerivedV> & V,
         const Eigen::MatrixBase<DerivedF> & F,
         CGAL::AABB_tree<
-          CGAL::AABB_traits<Kernel, 
+          CGAL::AABB_traits_3<Kernel, 
-            CGAL::AABB_triangle_primitive<Kernel, 
+            CGAL::AABB_triangle_primitive_3<Kernel, 
               typename std::vector<CGAL::Triangle_3<Kernel> >::iterator
             >
           >
@@ -89,8 +89,8 @@ namespace igl
       IGL_INLINE void point_mesh_squared_distance(
         const Eigen::MatrixBase<DerivedP> & P,
         const CGAL::AABB_tree<
-          CGAL::AABB_traits<Kernel, 
+          CGAL::AABB_traits_3<Kernel, 
-            CGAL::AABB_triangle_primitive<Kernel, 
+            CGAL::AABB_triangle_primitive_3<Kernel, 
               typename std::vector<CGAL::Triangle_3<Kernel> >::iterator
             >
           >

deps_src/libigl/igl/copyleft/cgal/points_inside_component.cpp

@@ -13,8 +13,8 @@
 #include "assign_scalar.h"
 
 #include <CGAL/AABB_tree.h>
-#include <CGAL/AABB_traits.h>
+#include <CGAL/AABB_traits_3.h>
-#include <CGAL/AABB_triangle_primitive.h>
+#include <CGAL/AABB_triangle_primitive_3.h>
 #include <CGAL/Exact_predicates_exact_constructions_kernel.h>
 
 #include <cassert>
@@ -35,8 +35,8 @@ namespace igl {
             typedef Kernel::Triangle_3 Triangle;
             typedef Kernel::Plane_3 Plane_3;
             typedef std::vector<Triangle>::iterator Iterator;
-            typedef CGAL::AABB_triangle_primitive<Kernel, Iterator> Primitive;
+            typedef CGAL::AABB_triangle_primitive_3<Kernel, Iterator> Primitive;
-            typedef CGAL::AABB_traits<Kernel, Primitive> AABB_triangle_traits;
+            typedef CGAL::AABB_traits_3<Kernel, Primitive> AABB_triangle_traits;
             typedef CGAL::AABB_tree<AABB_triangle_traits> Tree;
 
             template<typename DerivedF, typename DerivedI>

deps_src/libigl/igl/copyleft/cgal/signed_distance_isosurface.cpp

@@ -23,8 +23,8 @@
 #include <CGAL/IO/output_surface_facets_to_polyhedron.h>
 // Axis-aligned bounding box tree for tet tri intersection
 #include <CGAL/AABB_tree.h>
-#include <CGAL/AABB_traits.h>
+#include <CGAL/AABB_traits_3.h>
-#include <CGAL/AABB_triangle_primitive.h>
+#include <CGAL/AABB_triangle_primitive_3.h>
 #include <vector>
 
 IGL_INLINE bool igl::copyleft::cgal::signed_distance_isosurface(

deps_src/libigl/igl/copyleft/cgal/submesh_aabb_tree.cpp

@@ -18,9 +18,9 @@ IGL_INLINE void igl::copyleft::cgal::submesh_aabb_tree(
   const Eigen::MatrixBase<DerivedF>& F,
   const Eigen::MatrixBase<DerivedI>& I,
   CGAL::AABB_tree<
-    CGAL::AABB_traits<
+    CGAL::AABB_traits_3<
       Kernel, 
-      CGAL::AABB_triangle_primitive<
+      CGAL::AABB_triangle_primitive_3<
         Kernel, typename std::vector<
           typename Kernel::Triangle_3 >::iterator > > > & tree,
   std::vector<typename Kernel::Triangle_3 > & triangles,
@@ -51,7 +51,7 @@ IGL_INLINE void igl::copyleft::cgal::submesh_aabb_tree(
 #ifdef IGL_STATIC_LIBRARY
 // Explicit template instantiation
 // generated by autoexplicit.sh
-template void igl::copyleft::cgal::submesh_aabb_tree<Eigen::Matrix<CGAL::Epeck::FT, -1, -1, 0, -1, -1>, Eigen::Matrix<int, -1, -1, 0, -1, -1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, CGAL::Epeck>(Eigen::MatrixBase<Eigen::Matrix<CGAL::Epeck::FT, -1, -1, 0, -1, -1> > const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, -1, 0, -1, -1> > const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1> > const&, CGAL::AABB_tree<CGAL::AABB_traits<CGAL::Epeck, CGAL::AABB_triangle_primitive<CGAL::Epeck, std::vector<CGAL::Epeck::Triangle_3, std::allocator<CGAL::Epeck::Triangle_3> >::iterator, CGAL::Boolean_tag<false> > > >&, std::vector<CGAL::Epeck::Triangle_3, std::allocator<CGAL::Epeck::Triangle_3> >&, std::vector<bool, std::allocator<bool> >&);
+template void igl::copyleft::cgal::submesh_aabb_tree<Eigen::Matrix<CGAL::Epeck::FT, -1, -1, 0, -1, -1>, Eigen::Matrix<int, -1, -1, 0, -1, -1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, CGAL::Epeck>(Eigen::MatrixBase<Eigen::Matrix<CGAL::Epeck::FT, -1, -1, 0, -1, -1> > const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, -1, 0, -1, -1> > const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1> > const&, CGAL::AABB_tree<CGAL::AABB_traits_3<CGAL::Epeck, CGAL::AABB_triangle_primitive_3<CGAL::Epeck, std::vector<CGAL::Epeck::Triangle_3, std::allocator<CGAL::Epeck::Triangle_3> >::iterator, CGAL::Boolean_tag<false> > > >&, std::vector<CGAL::Epeck::Triangle_3, std::allocator<CGAL::Epeck::Triangle_3> >&, std::vector<bool, std::allocator<bool> >&);
-template void igl::copyleft::cgal::submesh_aabb_tree<Eigen::Matrix<CGAL::Epeck::FT, -1, -1, 1, -1, -1>, Eigen::Matrix<int, -1, -1, 0, -1, -1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, CGAL::Epeck>(Eigen::MatrixBase<Eigen::Matrix<CGAL::Epeck::FT, -1, -1, 1, -1, -1> > const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, -1, 0, -1, -1> > const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1> > const&, CGAL::AABB_tree<CGAL::AABB_traits<CGAL::Epeck, CGAL::AABB_triangle_primitive<CGAL::Epeck, std::vector<CGAL::Epeck::Triangle_3, std::allocator<CGAL::Epeck::Triangle_3> >::iterator, CGAL::Boolean_tag<false> > > >&, std::vector<CGAL::Epeck::Triangle_3, std::allocator<CGAL::Epeck::Triangle_3> >&, std::vector<bool, std::allocator<bool> >&);
+template void igl::copyleft::cgal::submesh_aabb_tree<Eigen::Matrix<CGAL::Epeck::FT, -1, -1, 1, -1, -1>, Eigen::Matrix<int, -1, -1, 0, -1, -1>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, CGAL::Epeck>(Eigen::MatrixBase<Eigen::Matrix<CGAL::Epeck::FT, -1, -1, 1, -1, -1> > const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, -1, 0, -1, -1> > const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1> > const&, CGAL::AABB_tree<CGAL::AABB_traits_3<CGAL::Epeck, CGAL::AABB_triangle_primitive_3<CGAL::Epeck, std::vector<CGAL::Epeck::Triangle_3, std::allocator<CGAL::Epeck::Triangle_3> >::iterator, CGAL::Boolean_tag<false> > > >&, std::vector<CGAL::Epeck::Triangle_3, std::allocator<CGAL::Epeck::Triangle_3> >&, std::vector<bool, std::allocator<bool> >&);
-template void igl::copyleft::cgal::submesh_aabb_tree<Eigen::Matrix<CGAL::Epeck::FT, -1, -1, 1, -1, -1>, Eigen::Matrix<int, -1, 3, 1, -1, 3>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, CGAL::Epeck>(Eigen::MatrixBase<Eigen::Matrix<CGAL::Epeck::FT, -1, -1, 1, -1, -1> > const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, 3, 1, -1, 3> > const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1> > const&, CGAL::AABB_tree<CGAL::AABB_traits<CGAL::Epeck, CGAL::AABB_triangle_primitive<CGAL::Epeck, std::vector<CGAL::Epeck::Triangle_3, std::allocator<CGAL::Epeck::Triangle_3> >::iterator, CGAL::Boolean_tag<false> > > >&, std::vector<CGAL::Epeck::Triangle_3, std::allocator<CGAL::Epeck::Triangle_3> >&, std::vector<bool, std::allocator<bool> >&);
+template void igl::copyleft::cgal::submesh_aabb_tree<Eigen::Matrix<CGAL::Epeck::FT, -1, -1, 1, -1, -1>, Eigen::Matrix<int, -1, 3, 1, -1, 3>, Eigen::Matrix<int, -1, 1, 0, -1, 1>, CGAL::Epeck>(Eigen::MatrixBase<Eigen::Matrix<CGAL::Epeck::FT, -1, -1, 1, -1, -1> > const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, 3, 1, -1, 3> > const&, Eigen::MatrixBase<Eigen::Matrix<int, -1, 1, 0, -1, 1> > const&, CGAL::AABB_tree<CGAL::AABB_traits_3<CGAL::Epeck, CGAL::AABB_triangle_primitive_3<CGAL::Epeck, std::vector<CGAL::Epeck::Triangle_3, std::allocator<CGAL::Epeck::Triangle_3> >::iterator, CGAL::Boolean_tag<false> > > >&, std::vector<CGAL::Epeck::Triangle_3, std::allocator<CGAL::Epeck::Triangle_3> >&, std::vector<bool, std::allocator<bool> >&);
 #endif

deps_src/libigl/igl/copyleft/cgal/submesh_aabb_tree.h

@@ -14,8 +14,8 @@
 #include <vector>
 
 #include <CGAL/AABB_tree.h>
-#include <CGAL/AABB_traits.h>
+#include <CGAL/AABB_traits_3.h>
-#include <CGAL/AABB_triangle_primitive.h>
+#include <CGAL/AABB_triangle_primitive_3.h>
 #include <CGAL/intersections.h>
 #include <CGAL/Exact_predicates_exact_constructions_kernel.h>
 
@@ -44,9 +44,9 @@ namespace igl
         const Eigen::MatrixBase<DerivedF>& F,
         const Eigen::MatrixBase<DerivedI>& I,
         CGAL::AABB_tree<
-          CGAL::AABB_traits<
+          CGAL::AABB_traits_3<
             Kernel, 
-            CGAL::AABB_triangle_primitive<
+            CGAL::AABB_triangle_primitive_3<
               Kernel, typename std::vector<
                 typename Kernel::Triangle_3 >::iterator > > > & tree,
         std::vector<typename Kernel::Triangle_3 > & triangles,

deps_src/libnest2d/include/libnest2d/placers/nfpplacer.hpp

@@ -88,18 +88,6 @@ struct NfpPConfig {
      */
     bool explore_holes = false;
 
-    /**
-     * @brief Keep the final pile on the bin.
-     *
-     * The final alignment centres the pile on the alignment target. A target
-     * near an edge (a belt printer starts its parts at the leading end of the
-     * belt) would push part of a pile that is larger than the room around that
-     * point off the bed; with this set the pile stops at the edge instead, and a
-     * pile that does not fit along an axis is centred on it. Off by default, so
-     * the alignment of every other printer is unchanged.
-     */
-    bool clamp_to_bin = false;
-
     /**
      * @brief If true, use all CPUs available. Run on a single core otherwise.
      */
@@ -1125,23 +1113,6 @@ private:
 
         auto d = cb - ci;       
 
-        // Keep the pile on the bin (see Config::clamp_to_bin). The items' boxes carry
-        // their inflation, which is the margin left at the edge.
-        if (config_.clamp_to_bin) {
-            auto on_bin = [](Coord lo, Coord hi, Coord bin_lo, Coord bin_hi, Coord shift) {
-                if (hi - lo >= bin_hi - bin_lo)
-                    return (bin_lo + bin_hi) / 2 - (lo + hi) / 2;
-                if (lo + shift < bin_lo)
-                    shift = bin_lo - lo;
-                if (hi + shift > bin_hi)
-                    shift = bin_hi - hi;
-                return shift;
-            };
-            setX(d, on_bin(getX(bb.minCorner()), getX(bb.maxCorner()), getX(bbin.minCorner()), getX(bbin.maxCorner()), getX(d)));
-            setY(d, on_bin(getY(bb.minCorner()), getY(bb.maxCorner()), getY(bbin.minCorner()), getY(bbin.maxCorner()), getY(d)));
-            cb = ci + d;
-        }
-
         // BBS make sure the item won't clash with excluded regions
         // do we have wipe tower after arranging?
         std::set<int> extruders;

docs/HLSD/preset-cache.md

@@ -39,7 +39,7 @@ presets are never serialized — they have their own storage and their own lifec
 
 | Location | Contents on a shipped build | Role |
 |---|---|---|
-| `resources/profiles/` | `<vendor>.opc` alone — the profile and its preset JSONs both pruned | What the app ships with; what installing copies from, and the only thing it is read for |
+| `resources/profiles/` | `<vendor>.opc` alone — the profile and its preset JSONs both pruned | What the app ships with and what installing copies from; read directly for vendors not installed |
 | `<data_dir>/system/` | `<vendor>.opc` alone, or `<vendor>.json` + `<vendor>/` after an update | What the user has installed |
 | `<data_dir>/system/` (dev build) | `<vendor>.json` + `<vendor>/` + `<vendor>.opc` written at runtime | A developer tree caches as it parses |
 | `<data_dir>/cache/wizard_profile_data.json` | The wizard's derived vendor catalog plus the stamps it was built from | Written and read by the setup wizard only; never shipped (see "The wizard's profile-data cache") |
@@ -182,10 +182,11 @@ one startup.
 
 **A vendor is loaded from where it is installed and nowhere else.** For startup that
 is `<data_dir>/system/`; resources reaches the app by being *installed* into that
-directory first, never by being loaded from. (The setup wizard is the one caller with
+directory first, never by being loaded from. (The setup wizard and the Create Printer
-a different notion of "where": it also shows vendors the user has not installed, and
+dialog also offer vendors the user has not installed, and load those from
-loads those from `resources/profiles` — see "The wizard's profile-data cache".) There
+`resources/profiles`; see "The wizard's profile-data cache". The dialog's vendor-only and
-is one lookup tier and one parse source:
+filament-only scans read a cache only where it is the whole installation, and never write
+one.) There is one lookup tier and one parse source:
 
 ```
 load vendor V from <data_dir>/system:

resources/calib/temperature_tower/gen_belt_temp_tower.py

@@ -1,79 +0,0 @@
-#!/usr/bin/env python3
-"""Belt temperature-tower asset generator (discrete-provini design).
-
-A vertical temperature tower cannot be sliced on a belt printer, so lay a row of
-DISCRETE provini (one per temperature) along the belt (designed Y) with a fixed
-surface gap. Each provino is the chevron+arc unit (belt_temp_provino_unit.stl,
-keel-first); its temperature is ENGRAVED upright into the 50 mm face — a raised
-number would be an unsupported overhang on the belt. The C++ calib_temp belt branch
-(Plater.cpp) injects one M104 per zone 70 layers INTO provino i:
-  print_z[i] = i * PITCH * cos(theta) + 70 * layer_height   (theta = 45)
-inside the body, not in the empty inter-provino gap (which has no sliced layers for
-the event to attach to). PITCH below is the shared geometry contract with that code —
-keep them in sync.
-
-Generates one STL per filament temp range used by Temp_Calibration_Dlg.
-"""
-import numpy as np, trimesh, os
-from matplotlib.textpath import TextPath
-from matplotlib.font_manager import FontProperties
-from shapely.geometry import Polygon as ShPoly
-from shapely.ops import unary_union
-
-HERE = os.path.dirname(os.path.abspath(__file__))
-UNIT = os.path.join(HERE, 'belt_temp_provino_unit.stl')   # single provino, keel-first
-SURF_GAP = 25.0            # surface-to-surface gap between provini (mm) — user spec
-TEXT_H = 9.0
-TEXT_DEPTH = 0.8           # engraving depth (numbers are CUT into the face, not raised:
-                          # a raised number is an unsupported Y-overhang on the belt)
-TEXT_OVERSHOOT = 0.6       # extra height poking out of the face for a clean boolean cut
-
-# Temperature ranges (start, end) per filament family, 5 C step. File name encodes them.
-RANGES = [(230,190),(270,230),(250,230),(280,240),(240,210),(320,280)]
-
-unit = trimesh.load(UNIT)
-dY = unit.bounds[1,1] - unit.bounds[0,1]
-PITCH = dY + SURF_GAP                       # designed-Y pitch == C++ contract constant
-print(f"unit dY={dY:.2f}  PITCH={PITCH:.3f}  (C++ contract: print_z[i]=i*{PITCH:.3f}*cos45)")
-
-# 50 mm face normal (0,-1,1)/sqrt2 ; UPRIGHT basis u=+X det(+1) (verified non-mirrored)
-n = np.array([0,-1,1.])/np.sqrt(2)
-u = np.array([1,0,0.]); v = np.array([0,1,1.])/np.sqrt(2)
-R = np.column_stack([u,v,n])
-fn = unit.face_normals; fc = unit.triangles_center; fa = unit.area_faces
-sel = (fn@n) > 0.9
-face_c = (fc[sel]*fa[sel,None]).sum(0)/fa[sel].sum()
-
-def text_mesh(s):
-    tp = TextPath((0,0), s, size=TEXT_H, prop=FontProperties(family='DejaVu Sans'))
-    rings = [ShPoly(p) for p in tp.to_polygons() if len(p)>=3]
-    rings.sort(key=lambda r:r.area, reverse=True)
-    used=[False]*len(rings); parts=[]
-    for i,o in enumerate(rings):
-        if used[i]: continue
-        holes=[]
-        for j in range(i+1,len(rings)):
-            if not used[j] and o.contains(rings[j]): holes.append(rings[j].exterior.coords); used[j]=True
-        parts.append(ShPoly(o.exterior.coords,holes)); used[i]=True
-    poly = unary_union(parts)
-    geoms = list(poly.geoms) if poly.geom_type=='MultiPolygon' else [poly]
-    m = trimesh.util.concatenate([trimesh.creation.extrude_polygon(g,height=TEXT_DEPTH+TEXT_OVERSHOOT) for g in geoms])
-    c = m.bounds.mean(axis=0); m.apply_translation([-c[0],-c[1],0]); return m
-
-for t_start, t_end in RANGES:
-    temps = list(range(t_start, t_end-1, -5))
-    parts=[]
-    for i,T in enumerate(temps):
-        c = unit.copy(); c.apply_translation([0, i*PITCH, 0])
-        t = text_mesh(str(T)); M=np.eye(4); M[:3,:3]=R; t.apply_transform(M)
-        # place the text spanning from TEXT_DEPTH inside the face to TEXT_OVERSHOOT outside,
-        # then CUT it out of the provino (engrave) — no raised material, no Y-overhang.
-        t.apply_translation(face_c - n*TEXT_DEPTH + np.array([0,i*PITCH,0]))
-        c = trimesh.boolean.difference([c, t], engine='manifold')
-        parts.append(c)
-    asset = trimesh.util.concatenate(parts)
-    out = os.path.join(HERE, f"belt_temp_tower_{t_start}_{t_end}.stl")
-    asset.export(out)
-    dims = np.round(asset.bounds[1]-asset.bounds[0],1)
-    wt = all(p.is_watertight for p in parts)
-    print(f"  {t_start}->{t_end}: {len(temps)} zones  bbox={dims}  watertight={wt}  -> {os.path.basename(out)}")

resources/profiles/Creality.json

@@ -1,6 +1,6 @@
 {
 	"name": "Creality",
-	"version": "02.03.02.86",
+	"version": "02.03.02.87",
 	"force_update": "0",
 	"description": "Creality configurations",
 	"machine_model_list": [

resources/profiles/Creality/creality_ender2pro_buildplate_texture.svg

@@ -0,0 +1 @@
+<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 175 175"><path d="M59.89,164.54s.06.03.06.06v1.7s-.03.06-.06.06l-5.42.02c-1.6,0-2.89,1.31-2.87,2.92.02,1.58,1.34,2.83,2.91,2.83h5.37s.06.03.06.06v1.7s-.03.06-.06.06h-5.36c-2.66,0-4.82-2.18-4.74-4.84.07-2.47,2.07-4.47,4.53-4.55l5.57-.02ZM68.08,170.15c1.56,0,2.82-1.28,2.8-2.85-.02-1.54-1.31-2.77-2.85-2.77h-6.85s-.06.03-.06.06v9.3s.03.06.06.06h1.7s.06-.03.06-.06v-7.47s.03-.06.06-.06h5.05c.53,0,.98.41,1,.94.02.56-.43,1.01-.98,1.01h-4.83c-.06,0-.08.07-.04.11l5.5,5.51s.03.02.04.02h2.4c.06,0,.08-.07.04-.11l-3.69-3.7s0,0,0,0h.57ZM96.24,164.54h-1.7s-.06.03-.06.06v8.3c0,.58.47,1.05,1.05,1.05h6.76s.06-.03.06-.06v-1.7s-.03-.06-.06-.06h-5.92s-.06-.03-.06-.06v-7.47s-.03-.06-.06-.06M88.42,164.61c-.05-.08-.17-.08-.22,0l-5.34,9.26s.03.05.06.1h1.96s.04-.02.05-.03l3.32-5.76h.11l2.23,3.87s-.03.05-.06.1h-2.91s-.04.02-.05.03l-.98,1.7s.03.05.05.1c1.58,0,6.28,0,7.05,0,.05,0,.08-.05.05-.09-.58-1-5.33-9.26-5.33-9.26M125.16,164.54h-2.22s-.04,0-.05.02l-3.22,3.85s-.07.03-.1,0l-3.23-3.85s-.03-.02-.05-.02c-.49,0-7.47,0-10.16,0-.04,0-.06.03-.06.06v1.7s.03.06.06.06h3.67s.06.03.06.06v7.47s.03.06.06.06h1.7s.06-.03.06-.06v-7.47s.03-.06.06-.06h3.69s.04,0,.05.02l3.2,3.82s.02.03.02.04v3.65s.03.06.06.06h1.7s.06-.03.06-.06v-3.65s0-.03.02-.04l4.66-5.56s0-.1-.05-.1M103.47,173.96h1.7s.06-.03.06-.06v-9.29s-.03-.06-.06-.06h-1.7s-.06.03-.06.06v9.29s.03.06.06.06M81.84,166.31v-1.7s-.03-.06-.06-.06h-5.28c-2.6,0-4.71,2.11-4.71,4.71s2.11,4.71,4.71,4.71h5.28s.06-.03.06-.06v-1.7s-.03-.06-.06-.06h-5.28c-1.27,0-2.35-.83-2.74-1.97h8.02s.06-.03.06-.06v-1.7s-.03-.06-.06-.06h-8.02c.38-1.14,1.46-1.97,2.74-1.97h5.28s.06-.03.06-.06" style="fill:#bcbec0;"/></svg>

resources/profiles/Creality/creality_sermoond3_buildplate_texture.svg

@@ -0,0 +1 @@
+<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 175 175"><path d="M59.89,164.54s.06.03.06.06v1.7s-.03.06-.06.06l-5.42.02c-1.6,0-2.89,1.31-2.87,2.92.02,1.58,1.34,2.83,2.91,2.83h5.37s.06.03.06.06v1.7s-.03.06-.06.06h-5.36c-2.66,0-4.82-2.18-4.74-4.84.07-2.47,2.07-4.47,4.53-4.55l5.57-.02ZM68.08,170.15c1.56,0,2.82-1.28,2.8-2.85-.02-1.54-1.31-2.77-2.85-2.77h-6.85s-.06.03-.06.06v9.3s.03.06.06.06h1.7s.06-.03.06-.06v-7.47s.03-.06.06-.06h5.05c.53,0,.98.41,1,.94.02.56-.43,1.01-.98,1.01h-4.83c-.06,0-.08.07-.04.11l5.5,5.51s.03.02.04.02h2.4c.06,0,.08-.07.04-.11l-3.69-3.7s0,0,0,0h.57ZM96.24,164.54h-1.7s-.06.03-.06.06v8.3c0,.58.47,1.05,1.05,1.05h6.76s.06-.03.06-.06v-1.7s-.03-.06-.06-.06h-5.92s-.06-.03-.06-.06v-7.47s-.03-.06-.06-.06M88.42,164.61c-.05-.08-.17-.08-.22,0l-5.34,9.26s.03.05.06.1h1.96s.04-.02.05-.03l3.32-5.76h.11l2.23,3.87s-.03.05-.06.1h-2.91s-.04.02-.05.03l-.98,1.7s.03.05.05.1c1.58,0,6.28,0,7.05,0,.05,0,.08-.05.05-.09-.58-1-5.33-9.26-5.33-9.26M125.16,164.54h-2.22s-.04,0-.05.02l-3.22,3.85s-.07.03-.1,0l-3.23-3.85s-.03-.02-.05-.02c-.49,0-7.47,0-10.16,0-.04,0-.06.03-.06.06v1.7s.03.06.06.06h3.67s.06.03.06.06v7.47s.03.06.06.06h1.7s.06-.03.06-.06v-7.47s.03-.06.06-.06h3.69s.04,0,.05.02l3.2,3.82s.02.03.02.04v3.65s.03.06.06.06h1.7s.06-.03.06-.06v-3.65s0-.03.02-.04l4.66-5.56s0-.1-.05-.1M103.47,173.96h1.7s.06-.03.06-.06v-9.29s-.03-.06-.06-.06h-1.7s-.06.03-.06.06v9.29s.03.06.06.06M81.84,166.31v-1.7s-.03-.06-.06-.06h-5.28c-2.6,0-4.71,2.11-4.71,4.71s2.11,4.71,4.71,4.71h5.28s.06-.03.06-.06v-1.7s-.03-.06-.06-.06h-5.28c-1.27,0-2.35-.83-2.74-1.97h8.02s.06-.03.06-.06v-1.7s-.03-.06-.06-.06h-8.02c.38-1.14,1.46-1.97,2.74-1.97h5.28s.06-.03.06-.06" style="fill:#bcbec0;"/></svg>

resources/profiles/Creality/machine/Creality Ender-2 Pro.json

@@ -2,9 +2,9 @@
 	"type": "machine_model",
 	"name": "Creality Ender-2 Pro",
 	"nozzle_diameter": "0.4",
-	"bed_model": "creality_k1_buildplate_model.stl",
+	"bed_model": "creality_ender2pro_buildplate_model.stl",
 	"default_bed_type": "Cool Plate",
-	"bed_texture": "",
+	"bed_texture": "creality_ender2pro_buildplate_texture.svg",
 	"family": "Creality",
 	"hotend_model": "",
 	"machine_tech": "FFF",

resources/profiles/Creality/machine/Creality Sermoon D3 Pro.json

@@ -2,9 +2,9 @@
 	"type": "machine_model",
 	"name": "Creality Sermoon D3 Pro",
 	"nozzle_diameter": "0.4",
-	"bed_model": "creality_cr10v2_buildplate_model.stl",
+	"bed_model": "creality_sermoond3_buildplate_model.stl",
 	"default_bed_type": "High Temp Plate",
-	"bed_texture": "creality_cr10v2_buildplate_texture.svg",
+	"bed_texture": "creality_sermoond3_buildplate_texture.svg",
 	"family": "Creality",
 	"hotend_model": "",
 	"machine_tech": "FFF",

resources/profiles/Creality/machine/Creality Sermoon D3.json

@@ -2,9 +2,9 @@
 	"type": "machine_model",
 	"name": "Creality Sermoon D3",
 	"nozzle_diameter": "0.4",
-	"bed_model": "creality_cr10v2_buildplate_model.stl",
+	"bed_model": "creality_sermoond3_buildplate_model.stl",
 	"default_bed_type": "High Temp Plate",
-	"bed_texture": "creality_cr10v2_buildplate_texture.svg",
+	"bed_texture": "creality_sermoond3_buildplate_texture.svg",
 	"family": "Creality",
 	"hotend_model": "",
 	"machine_tech": "FFF",

resources/profiles/Creality/machine/Creality Sermoon V1 Pro.json

@@ -2,9 +2,9 @@
 	"type": "machine_model",
 	"name": "Creality Sermoon V1 Pro",
 	"nozzle_diameter": "0.4",
-	"bed_model": "creality_k1_buildplate_model.stl",
+	"bed_model": "creality_sermoonv1_buildplate_model.stl",
 	"default_bed_type": "Cool Plate",
-	"bed_texture": "",
+	"bed_texture": "creality_sermoonv1_buildplate_texture.svg",
 	"family": "Creality",
 	"hotend_model": "",
 	"machine_tech": "FFF",

resources/profiles/Custom.json

@@ -1,13 +1,9 @@
 {
 	"name": "Custom Printer",
-	"version": "02.04.00.08",
+	"version": "02.04.00.07",
 	"force_update": "0",
 	"description": "My configurations",
 	"machine_model_list": [
-		{
-			"name": "Generic Belt Printer",
-			"sub_path": "machine/MyBeltPrinter.json"
-		},
 		{
 			"name": "Generic Klipper Printer",
 			"sub_path": "machine/MyKlipper.json"
@@ -54,10 +50,6 @@
 			"name": "0.08mm Extra Fine @MyKlipper",
 			"sub_path": "process/0.08mm Extra Fine @MyKlipper.json"
 		},
-		{
-			"name": "0.12mm Fine @MyBeltPrinter",
-			"sub_path": "process/0.12mm Fine @MyBeltPrinter.json"
-		},
 		{
 			"name": "0.12mm Fine @MyKlipper",
 			"sub_path": "process/0.12mm Fine @MyKlipper.json"
@@ -70,10 +62,6 @@
 			"name": "0.16mm Optimal @MyKlipper",
 			"sub_path": "process/0.16mm Optimal @MyKlipper.json"
 		},
-		{
-			"name": "0.20mm Standard @MyBeltPrinter",
-			"sub_path": "process/0.20mm Standard @MyBeltPrinter.json"
-		},
 		{
 			"name": "0.20mm Standard @MyKlipper",
 			"sub_path": "process/0.20mm Standard @MyKlipper.json"
@@ -274,10 +262,6 @@
 			"name": "MyKlipper 0.8 nozzle",
 			"sub_path": "machine/MyKlipper 0.8 nozzle.json"
 		},
-		{
-			"name": "fdm_belt_common",
-			"sub_path": "machine/fdm_belt_common.json"
-		},
 		{
 			"name": "fdm_toolchanger_common",
 			"sub_path": "machine/fdm_toolchanger_common.json"
@@ -290,22 +274,6 @@
 			"name": "MyRRF 0.4 nozzle",
 			"sub_path": "machine/MyRRF 0.4 nozzle.json"
 		},
-		{
-			"name": "MyBeltPrinter 0.2 nozzle",
-			"sub_path": "machine/MyBeltPrinter 0.2 nozzle.json"
-		},
-		{
-			"name": "MyBeltPrinter 0.4 nozzle",
-			"sub_path": "machine/MyBeltPrinter 0.4 nozzle.json"
-		},
-		{
-			"name": "MyBeltPrinter 0.6 nozzle",
-			"sub_path": "machine/MyBeltPrinter 0.6 nozzle.json"
-		},
-		{
-			"name": "MyBeltPrinter 0.8 nozzle",
-			"sub_path": "machine/MyBeltPrinter 0.8 nozzle.json"
-		},
 		{
 			"name": "MyToolChanger 0.2 nozzle",
 			"sub_path": "machine/MyToolChanger 0.2 nozzle.json"

resources/profiles/Custom/machine/MyBeltPrinter 0.2 nozzle.json

@@ -1,27 +0,0 @@
-{
-	"type": "machine",
-	"name": "MyBeltPrinter 0.2 nozzle",
-	"inherits": "fdm_belt_common",
-	"from": "system",
-	"setting_id": "3w1uyJdmm14QhDnH",
-	"instantiation": "true",
-	"printer_model": "Generic Belt Printer",
-	"default_print_profile": "0.12mm Fine @MyBeltPrinter",
-	"nozzle_diameter": [
-		"0.2"
-	],
-	"max_layer_height": [
-		"0.16"
-	],
-	"min_layer_height": [
-		"0.04"
-	],
-	"printer_variant": "0.2",
-	"printable_area": [
-		"0x0",
-		"350x0",
-		"350x350",
-		"0x350"
-	],
-	"printable_height": "300"
-}

resources/profiles/Custom/machine/MyBeltPrinter 0.4 nozzle.json

@@ -1,20 +0,0 @@
-{
-	"type": "machine",
-	"name": "MyBeltPrinter 0.4 nozzle",
-	"inherits": "fdm_belt_common",
-	"from": "system",
-	"setting_id": "6nRHUtvJOUffocbu",
-	"instantiation": "true",
-	"printer_model": "Generic Belt Printer",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"printer_variant": "0.4",
-	"printable_area": [
-		"0x0",
-		"350x0",
-		"350x350",
-		"0x350"
-	],
-	"printable_height": "300"
-}

resources/profiles/Custom/machine/MyBeltPrinter 0.6 nozzle.json

@@ -1,26 +0,0 @@
-{
-	"type": "machine",
-	"name": "MyBeltPrinter 0.6 nozzle",
-	"inherits": "fdm_belt_common",
-	"from": "system",
-	"setting_id": "K0m9HbUNwKT4UCJV",
-	"instantiation": "true",
-	"printer_model": "Generic Belt Printer",
-	"nozzle_diameter": [
-		"0.6"
-	],
-	"max_layer_height": [
-		"0.4"
-	],
-	"min_layer_height": [
-		"0.12"
-	],
-	"printer_variant": "0.6",
-	"printable_area": [
-		"0x0",
-		"350x0",
-		"350x350",
-		"0x350"
-	],
-	"printable_height": "300"
-}

resources/profiles/Custom/machine/MyBeltPrinter 0.8 nozzle.json

@@ -1,26 +0,0 @@
-{
-	"type": "machine",
-	"name": "MyBeltPrinter 0.8 nozzle",
-	"inherits": "fdm_belt_common",
-	"from": "system",
-	"setting_id": "rHAweDz4eNwttPNA",
-	"instantiation": "true",
-	"printer_model": "Generic Belt Printer",
-	"nozzle_diameter": [
-		"0.8"
-	],
-	"max_layer_height": [
-		"0.6"
-	],
-	"min_layer_height": [
-		"0.2"
-	],
-	"printer_variant": "0.8",
-	"printable_area": [
-		"0x0",
-		"350x0",
-		"350x350",
-		"0x350"
-	],
-	"printable_height": "300"
-}

resources/profiles/Custom/machine/MyBeltPrinter.json

@@ -1,12 +0,0 @@
-{
-	"type": "machine_model",
-	"name": "Generic Belt Printer",
-	"model_id": "my_belt_01",
-	"nozzle_diameter": "0.4;0.2;0.6;0.8",
-	"machine_tech": "FFF",
-	"family": "MyPrinter",
-	"bed_model": "Custom_350_bed.stl",
-	"bed_texture": "orcaslicer_bed_texture.svg",
-	"hotend_model": "",
-	"default_materials": "Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System"
-}

resources/profiles/Custom/machine/fdm_belt_common.json

@@ -1,95 +0,0 @@
-{
-	"type": "machine",
-	"name": "fdm_belt_common",
-	"inherits": "fdm_klipper_common",
-	"from": "system",
-	"instantiation": "false",
-	"gcode_flavor": "klipper",
-	"single_extruder_multi_material": "0",
-	"default_filament_profile": [
-		"Generic PLA @System"
-	],
-	"default_print_profile": "0.20mm Standard @MyBeltPrinter",
-	"max_layer_height": [
-		"0.32"
-	],
-	"min_layer_height": [
-		"0.08"
-	],
-	"deretraction_speed": [
-		"30"
-	],
-	"extruder_colour": [
-		"#FCE94F"
-	],
-	"extruder_offset": [
-		"0x0"
-	],
-	"long_retractions_when_cut": [
-		"0"
-	],
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"retract_before_wipe": [
-		"70%"
-	],
-	"retract_length_toolchange": [
-		"2"
-	],
-	"retract_lift_above": [
-		"0"
-	],
-	"retract_lift_below": [
-		"0"
-	],
-	"retract_lift_enforce": [
-		"All Surfaces"
-	],
-	"retract_restart_extra": [
-		"0"
-	],
-	"retract_restart_extra_toolchange": [
-		"0"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"retraction_distances_when_cut": [
-		"18"
-	],
-	"retraction_length": [
-		"0.8"
-	],
-	"retraction_minimum_travel": [
-		"1"
-	],
-	"retraction_speed": [
-		"30"
-	],
-	"travel_slope": [
-		"3"
-	],
-	"wipe": [
-		"1"
-	],
-	"wipe_distance": [
-		"1"
-	],
-	"z_hop": [
-		"0"
-	],
-	"z_hop_types": [
-		"Normal Lift"
-	],
-	"gcode_remap_x": "rev_x",
-	"gcode_remap_y": "pos_z",
-	"gcode_remap_z": "pos_y",
-	"belt_printer": "1",
-	"belt_slice_rotation": "x",
-	"belt_slice_rotation_angle": "45",
-	"build_plate_tilt_x": "45",
-	"purge_in_prime_tower": "0",
-	"scan_first_layer": "0",
-	"auxiliary_fan": "0"
-}

resources/profiles/Custom/process/0.12mm Fine @MyBeltPrinter.json

@@ -1,20 +0,0 @@
-{
-	"type": "process",
-	"name": "0.12mm Fine @MyBeltPrinter",
-	"inherits": "fdm_process_klipper_common",
-	"from": "system",
-	"setting_id": "EugqqdLJ423bgEwN",
-	"instantiation": "true",
-	"layer_height": "0.12",
-	"initial_layer_print_height": "0.12",
-	"bottom_shell_layers": "5",
-	"top_shell_layers": "6",
-	"support_top_z_distance": "0.08",
-	"support_bottom_z_distance": "0.08",
-	"skirt_loops": "0",
-	"skirt_distance": "0",
-	"compatible_printers": [
-		"MyBeltPrinter 0.2 nozzle",
-		"MyBeltPrinter 0.4 nozzle"
-	]
-}

resources/profiles/Custom/process/0.20mm Standard @MyBeltPrinter.json

@@ -1,17 +0,0 @@
-{
-	"type": "process",
-	"name": "0.20mm Standard @MyBeltPrinter",
-	"inherits": "fdm_process_klipper_common",
-	"from": "system",
-	"setting_id": "YzCDAgH3uLOM53pF",
-	"instantiation": "true",
-	"layer_height": "0.2",
-	"initial_layer_print_height": "0.2",
-	"skirt_loops": "0",
-	"skirt_distance": "0",
-	"compatible_printers": [
-		"MyBeltPrinter 0.4 nozzle",
-		"MyBeltPrinter 0.6 nozzle",
-		"MyBeltPrinter 0.8 nozzle"
-	]
-}

resources/profiles/IdeaFormer.json

@@ -1,54 +0,0 @@
-{
-    "name": "IdeaFormer",
-    "version": "02.00.00.06",
-    "force_update": "0",
-    "description": "IdeaFormer belt printer configurations",
-    "machine_model_list": [
-        {
-            "name": "IdeaFormer IR3 V2",
-            "sub_path": "machine/IdeaFormer IR3 V2.json"
-        }
-    ],
-    "process_list": [
-        {
-            "name": "fdm_process_common",
-            "sub_path": "process/fdm_process_common.json"
-        },
-        {
-            "name": "0.20mm Standard @IdeaFormer IR3 V2",
-            "sub_path": "process/0.20mm Standard @IdeaFormer IR3 V2.json"
-        }
-    ],
-    "filament_list": [
-        {
-            "name": "Generic PLA @IdeaFormer IR3 V2",
-            "sub_path": "filament/Generic PLA @IdeaFormer IR3 V2.json"
-        },
-        {
-            "name": "eSUN PLA @IdeaFormer IR3 V2",
-            "sub_path": "filament/eSUN PLA @IdeaFormer IR3 V2.json"
-        },
-        {
-            "name": "Generic PETG @IdeaFormer IR3 V2",
-            "sub_path": "filament/Generic PETG @IdeaFormer IR3 V2.json"
-        }
-    ],
-    "machine_list": [
-        {
-            "name": "fdm_machine_common",
-            "sub_path": "machine/fdm_machine_common.json"
-        },
-        {
-            "name": "fdm_klipper_common",
-            "sub_path": "machine/fdm_klipper_common.json"
-        },
-        {
-            "name": "fdm_belt_common",
-            "sub_path": "machine/fdm_belt_common.json"
-        },
-        {
-            "name": "IdeaFormer IR3 V2 0.4 nozzle",
-            "sub_path": "machine/IdeaFormer IR3 V2 0.4 nozzle.json"
-        }
-    ]
-}

resources/profiles/IdeaFormer/filament/Generic PETG @IdeaFormer IR3 V2.json

@@ -1,77 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PETG @IdeaFormer IR3 V2",
-	"inherits": "Generic PETG @System",
-	"from": "system",
-	"setting_id": "n4zaXcUUzTqAxq5f",
-	"instantiation": "true",
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"compatible_printers": [
-		"IdeaFormer IR3 V2 0.4 nozzle"
-	],
-	"filament_type": [
-		"PETG"
-	],
-	"filament_vendor": [
-		"Generic"
-	],
-	"filament_settings_id": [
-		"Generic PETG @IdeaFormer IR3 V2"
-	],
-	"filament_flow_ratio": [
-		"0.95"
-	],
-	"filament_cost": [
-		"25"
-	],
-	"nozzle_temperature": [
-		"240"
-	],
-	"nozzle_temperature_initial_layer": [
-		"245"
-	],
-	"cool_plate_temp": [
-		"80"
-	],
-	"cool_plate_temp_initial_layer": [
-		"80"
-	],
-	"fan_min_speed": [
-		"40"
-	],
-	"fan_max_speed": [
-		"60"
-	],
-	"overhang_fan_threshold": [
-		"25%"
-	],
-	"overhang_fan_speed": [
-		"80"
-	],
-	"full_fan_speed_layer": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"slow_down_layer_time": [
-		"4"
-	],
-	"fan_cooling_layer_time": [
-		"100"
-	],
-	"filament_retraction_length": [
-		"2"
-	],
-	"filament_retraction_speed": [
-		"40"
-	],
-	"filament_deretraction_speed": [
-		"40"
-	],
-	"filament_start_gcode": [
-		"; Generic PETG @IdeaFormer IR3 V2 — belt PETG, bed 80C"
-	]
-}

resources/profiles/IdeaFormer/filament/Generic PLA @IdeaFormer IR3 V2.json

@@ -1,65 +0,0 @@
-{
-	"type": "filament",
-	"name": "Generic PLA @IdeaFormer IR3 V2",
-	"inherits": "Generic PLA @System",
-	"from": "system",
-	"setting_id": "1xjycsEAFh6KQIhp",
-	"instantiation": "true",
-	"filament_extruder_variant": [
-		"Direct Drive Standard"
-	],
-	"compatible_printers": [
-		"IdeaFormer IR3 V2 0.4 nozzle"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_vendor": [
-		"Generic"
-	],
-	"filament_settings_id": [
-		"Generic PLA @IdeaFormer IR3 V2"
-	],
-	"nozzle_temperature": [
-		"215"
-	],
-	"hot_plate_temp": [
-		"75"
-	],
-	"hot_plate_temp_initial_layer": [
-		"75"
-	],
-	"cool_plate_temp": [
-		"75"
-	],
-	"cool_plate_temp_initial_layer": [
-		"75"
-	],
-	"textured_plate_temp": [
-		"75"
-	],
-	"textured_plate_temp_initial_layer": [
-		"75"
-	],
-	"close_fan_the_first_x_layers": [
-		"3"
-	],
-	"full_fan_speed_layer": [
-		"8"
-	],
-	"slow_down_min_speed": [
-		"20"
-	],
-	"filament_retraction_length": [
-		"1.5"
-	],
-	"filament_retraction_speed": [
-		"35"
-	],
-	"filament_deretraction_speed": [
-		"30"
-	],
-	"filament_start_gcode": [
-		"; Generic PLA @IdeaFormer IR3 V2 — belt PLA, bed 75C"
-	]
-}

resources/profiles/IdeaFormer/filament/eSUN PLA @IdeaFormer IR3 V2.json

@@ -1,36 +0,0 @@
-{
-	"type": "filament",
-	"name": "eSUN PLA @IdeaFormer IR3 V2",
-	"inherits": "Generic PLA @IdeaFormer IR3 V2",
-	"from": "system",
-	"setting_id": "XqkviBmFHEglXueX",
-	"filament_id": "OFkrxQC4",
-	"instantiation": "true",
-	"compatible_printers": [
-		"IdeaFormer IR3 V2 0.4 nozzle"
-	],
-	"filament_type": [
-		"PLA"
-	],
-	"filament_vendor": [
-		"eSUN"
-	],
-	"filament_settings_id": [
-		"eSUN PLA @IdeaFormer IR3 V2"
-	],
-	"nozzle_temperature_initial_layer": [
-		"200"
-	],
-	"nozzle_temperature": [
-		"200"
-	],
-	"enable_pressure_advance": [
-		"1"
-	],
-	"pressure_advance": [
-		"0.12"
-	],
-	"filament_max_volumetric_speed": [
-		"20"
-	]
-}

resources/profiles/IdeaFormer/machine/IdeaFormer IR3 V2 0.4 nozzle.json

@@ -1,98 +0,0 @@
-{
-	"type": "machine",
-	"name": "IdeaFormer IR3 V2 0.4 nozzle",
-	"inherits": "fdm_belt_common",
-	"from": "system",
-	"setting_id": "MDQZgwRgg72lmjtu",
-	"instantiation": "true",
-	"printer_model": "IdeaFormer IR3 V2",
-	"printer_variant": "0.4",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"printable_area": [
-		"0x0",
-		"250x0",
-		"250x2000",
-		"0x2000"
-	],
-	"printable_height": "250",
-	"belt_printer_infinite_y": "1",
-	"thumbnails": [
-		"48x48/PNG",
-		"300x300/PNG"
-	],
-	"default_filament_profile": [
-		"Generic PLA @IdeaFormer IR3 V2"
-	],
-	"default_print_profile": "0.20mm Standard @IdeaFormer IR3 V2",
-	"use_relative_e_distances": "1",
-	"machine_max_acceleration_extruding": [
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_retracting": [
-		"1000",
-		"1000"
-	],
-	"machine_max_acceleration_travel": [
-		"9000",
-		"9000"
-	],
-	"machine_max_acceleration_x": [
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_y": [
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_z": [
-		"100",
-		"100"
-	],
-	"machine_max_jerk_x": [
-		"10",
-		"10"
-	],
-	"machine_max_jerk_y": [
-		"10",
-		"10"
-	],
-	"machine_max_jerk_z": [
-		"0.4",
-		"0.4"
-	],
-	"machine_max_speed_e": [
-		"60",
-		"60"
-	],
-	"machine_max_speed_x": [
-		"500",
-		"500"
-	],
-	"machine_max_speed_y": [
-		"500",
-		"500"
-	],
-	"machine_max_speed_z": [
-		"20",
-		"20"
-	],
-	"retraction_length": [
-		"2"
-	],
-	"retraction_speed": [
-		"40"
-	],
-	"deretraction_speed": [
-		"40"
-	],
-	"retract_lift_below": [
-		"300"
-	],
-	"machine_start_gcode": "; === IdeaFormer IR3 V2 Belt Printer Start ===\n; Axes: X=lateral, Y=gantry height (probe), Z=belt\nG90 ; absolute positioning\nM82 ; absolute extruder\nG21 ; millimeters\nG28 ; home all axes\nG1 Y20 F500 ; lift nozzle 20mm from belt\n; Bed + hotend temps come from the active filament profile. Belt PLA requires 75 C bed — use Generic/eSun PLA @IdeaFormer IR3 V2 filament presets to get it automatically.\nM140 S[hot_plate_temp_initial_layer] ; set bed temp\nM104 S[nozzle_temperature_initial_layer] ; hotend temp\nM109 S[nozzle_temperature_initial_layer] ; wait hotend\nM190 S[hot_plate_temp_initial_layer] ; wait bed\n; --- Purge blob ---\nG92 E0 ; zero extruder\nG1 Y.1 ; nozzle 0.1mm above belt\nG1 E15 F1000 ; purge 15mm blob\nG1 Z20 E25 F800 ; belt advance 20mm + extrude\nG1 E23 ; retract 2mm\nG28 Y ; re-probe belt surface\nG1 E25 ; de-retract\n; --- Prime lines (full 250mm bed width) ---\nFMS_on ; filament motion sensor\nG1 X250 E50 F2000 ; prime line 1\nG92 Z0 ; reset belt origin\nG1 Z.4 ; belt advance 0.4mm\nG1 X0 E75 ; prime line 2\nG1 F1000 ; default feedrate\nG92 E0 Z0 ; zero extruder + belt = print origin\n",
-	"machine_end_gcode": "; === IdeaFormer IR3 V2 Belt Printer End ===\nM400 ; wait for moves to finish\nM104 S0 ; heater off\nM140 S0 ; bed off\nG92 E0 ; zero extruder\nG1 E-5 F300 ; retract 5mm\nG4 P5000 ; wait for ooze\nG91 ; relative mode - keep every end move relative on a belt\nG1 Y20 F1000 ; raise gantry 20mm for clearance over the part\nG1 Z676 F3000 ; advance belt one full machine-depth to eject the part and clean the belt\nG90 ; back to absolute\nG28 X ; home X only - NEVER 'G28' all: that homes Z/belt and reverses the whole print back into the gantry\nFMS_off ; filament motion sensor off\nBED_MESH_CLEAR\nM84 ; disable motors\n",
-	"machine_pause_gcode": "PAUSE",
-	"layer_change_gcode": "G92 E0 ; belt: reset extruder at layer change (relative E)"
-}

resources/profiles/IdeaFormer/machine/IdeaFormer IR3 V2.json

@@ -1,12 +0,0 @@
-{
-	"type": "machine_model",
-	"name": "IdeaFormer IR3 V2",
-	"model_id": "IdeaFormer_IR3_V2",
-	"nozzle_diameter": "0.4",
-	"machine_tech": "FFF",
-	"family": "IdeaFormer",
-	"bed_model": "",
-	"bed_texture": "",
-	"hotend_model": "",
-	"default_materials": "Generic PLA @IdeaFormer IR3 V2;Generic PETG @IdeaFormer IR3 V2"
-}

resources/profiles/IdeaFormer/machine/fdm_belt_common.json

@@ -1,98 +0,0 @@
-{
-	"type": "machine",
-	"name": "fdm_belt_common",
-	"inherits": "fdm_klipper_common",
-	"from": "system",
-	"instantiation": "false",
-	"gcode_flavor": "klipper",
-	"single_extruder_multi_material": "0",
-	"default_filament_profile": [
-		"Generic PLA @System"
-	],
-	"default_print_profile": "0.20mm Standard @IdeaFormer IR3 V2",
-	"max_layer_height": [
-		"0.32"
-	],
-	"min_layer_height": [
-		"0.08"
-	],
-	"deretraction_speed": [
-		"30"
-	],
-	"extruder_colour": [
-		"#FCE94F"
-	],
-	"extruder_offset": [
-		"0x0"
-	],
-	"long_retractions_when_cut": [
-		"0"
-	],
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"retract_before_wipe": [
-		"70%"
-	],
-	"retract_length_toolchange": [
-		"2"
-	],
-	"retract_lift_above": [
-		"0"
-	],
-	"retract_lift_below": [
-		"0"
-	],
-	"retract_lift_enforce": [
-		"All Surfaces"
-	],
-	"retract_restart_extra": [
-		"0"
-	],
-	"retract_restart_extra_toolchange": [
-		"0"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"retraction_distances_when_cut": [
-		"18"
-	],
-	"retraction_length": [
-		"0.8"
-	],
-	"retraction_minimum_travel": [
-		"1"
-	],
-	"retraction_speed": [
-		"30"
-	],
-	"travel_slope": [
-		"3"
-	],
-	"wipe": [
-		"1"
-	],
-	"wipe_distance": [
-		"1"
-	],
-	"z_hop": [
-		"0"
-	],
-	"z_hop_types": [
-		"Normal Lift"
-	],
-	"gcode_remap_x": "rev_x",
-	"gcode_remap_y": "pos_z",
-	"gcode_remap_z": "pos_y",
-	"printer_extruder_id": [
-		"1"
-	],
-	"belt_printer": "1",
-	"belt_slice_rotation": "x",
-	"belt_slice_rotation_angle": "45",
-	"build_plate_tilt_x": "45",
-	"purge_in_prime_tower": "0",
-	"scan_first_layer": "0",
-	"auxiliary_fan": "0"
-}

resources/profiles/IdeaFormer/machine/fdm_klipper_common.json

@@ -1,140 +0,0 @@
-{
-	"type": "machine",
-	"name": "fdm_klipper_common",
-	"inherits": "fdm_machine_common",
-	"from": "system",
-	"instantiation": "false",
-	"gcode_flavor": "klipper",
-	"machine_max_acceleration_e": [
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_extruding": [
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_retracting": [
-		"5000",
-		"5000"
-	],
-	"machine_max_acceleration_travel": [
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_x": [
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_y": [
-		"20000",
-		"20000"
-	],
-	"machine_max_acceleration_z": [
-		"500",
-		"200"
-	],
-	"machine_max_speed_e": [
-		"25",
-		"25"
-	],
-	"machine_max_speed_x": [
-		"500",
-		"200"
-	],
-	"machine_max_speed_y": [
-		"500",
-		"200"
-	],
-	"machine_max_speed_z": [
-		"12",
-		"12"
-	],
-	"machine_max_jerk_e": [
-		"2.5",
-		"2.5"
-	],
-	"machine_max_jerk_x": [
-		"9",
-		"9"
-	],
-	"machine_max_jerk_y": [
-		"9",
-		"9"
-	],
-	"machine_max_jerk_z": [
-		"0.2",
-		"0.4"
-	],
-	"machine_min_extruding_rate": [
-		"0",
-		"0"
-	],
-	"machine_min_travel_rate": [
-		"0",
-		"0"
-	],
-	"max_layer_height": [
-		"0.32"
-	],
-	"min_layer_height": [
-		"0.08"
-	],
-	"printable_height": "250",
-	"extruder_clearance_radius": "65",
-	"extruder_clearance_height_to_rod": "36",
-	"extruder_clearance_height_to_lid": "140",
-	"printer_settings_id": "",
-	"printer_technology": "FFF",
-	"printer_variant": "0.4",
-	"retraction_minimum_travel": [
-		"1"
-	],
-	"retract_before_wipe": [
-		"70%"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"retraction_length": [
-		"0.8"
-	],
-	"retract_length_toolchange": [
-		"2"
-	],
-	"z_hop": [
-		"0.4"
-	],
-	"retract_restart_extra": [
-		"0"
-	],
-	"retract_restart_extra_toolchange": [
-		"0"
-	],
-	"retraction_speed": [
-		"30"
-	],
-	"deretraction_speed": [
-		"30"
-	],
-	"z_hop_types": "Normal Lift",
-	"single_extruder_multi_material": "1",
-	"change_filament_gcode": "",
-	"wipe": [
-		"1"
-	],
-	"default_filament_profile": [
-		"Generic PLA @System"
-	],
-	"default_print_profile": "0.20mm Standard @MyKlipper",
-	"bed_exclude_area": [
-		"0x0"
-	],
-	"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\n",
-	"machine_end_gcode": "PRINT_END",
-	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
-	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
-	"machine_pause_gcode": "PAUSE",
-	"scan_first_layer": "0",
-	"nozzle_type": "undefine",
-	"auxiliary_fan": "0"
-}

resources/profiles/IdeaFormer/machine/fdm_machine_common.json

@@ -1,118 +0,0 @@
-{
-	"type": "machine",
-	"name": "fdm_machine_common",
-	"from": "system",
-	"instantiation": "false",
-	"printer_technology": "FFF",
-	"deretraction_speed": [
-		"40"
-	],
-	"extruder_colour": [
-		"#FCE94F"
-	],
-	"extruder_offset": [
-		"0x0"
-	],
-	"gcode_flavor": "marlin",
-	"machine_max_acceleration_e": [
-		"5000"
-	],
-	"machine_max_acceleration_extruding": [
-		"10000"
-	],
-	"machine_max_acceleration_retracting": [
-		"1000"
-	],
-	"machine_max_acceleration_x": [
-		"10000"
-	],
-	"machine_max_acceleration_y": [
-		"10000"
-	],
-	"machine_max_acceleration_z": [
-		"500"
-	],
-	"machine_max_speed_e": [
-		"60"
-	],
-	"machine_max_speed_x": [
-		"500"
-	],
-	"machine_max_speed_y": [
-		"500"
-	],
-	"machine_max_speed_z": [
-		"10"
-	],
-	"machine_max_jerk_e": [
-		"5"
-	],
-	"machine_max_jerk_x": [
-		"8"
-	],
-	"machine_max_jerk_y": [
-		"8"
-	],
-	"machine_max_jerk_z": [
-		"0.4"
-	],
-	"machine_min_extruding_rate": [
-		"0"
-	],
-	"machine_min_travel_rate": [
-		"0"
-	],
-	"max_layer_height": [
-		"0.32"
-	],
-	"min_layer_height": [
-		"0.08"
-	],
-	"printable_height": "250",
-	"extruder_clearance_radius": "65",
-	"extruder_clearance_height_to_rod": "36",
-	"extruder_clearance_height_to_lid": "140",
-	"nozzle_diameter": [
-		"0.4"
-	],
-	"printer_settings_id": "",
-	"printer_variant": "0.4",
-	"retraction_minimum_travel": [
-		"2"
-	],
-	"retract_before_wipe": [
-		"70%"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"retraction_length": [
-		"1"
-	],
-	"retract_length_toolchange": [
-		"1"
-	],
-	"z_hop": [
-		"0"
-	],
-	"retract_restart_extra": [
-		"0"
-	],
-	"retract_restart_extra_toolchange": [
-		"0"
-	],
-	"retraction_speed": [
-		"60"
-	],
-	"single_extruder_multi_material": "1",
-	"change_filament_gcode": "",
-	"wipe": [
-		"1"
-	],
-	"default_print_profile": "",
-	"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
-	"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end",
-	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
-	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
-	"machine_pause_gcode": "M601"
-}

resources/profiles/IdeaFormer/process/0.20mm Standard @IdeaFormer IR3 V2.json

@@ -1,23 +0,0 @@
-{
-	"type": "process",
-	"name": "0.20mm Standard @IdeaFormer IR3 V2",
-	"inherits": "fdm_process_common",
-	"from": "system",
-	"setting_id": "91atcIwv5728phqX",
-	"instantiation": "true",
-	"layer_height": "0.2",
-	"initial_layer_print_height": "0.2",
-	"initial_layer_line_width": "0.42",
-	"wall_loops": "2",
-	"reduce_infill_retraction": "1",
-	"detect_overhang_wall": "1",
-	"skirt_loops": "0",
-	"skirt_distance": "0",
-	"sparse_infill_pattern": "grid",
-	"sparse_infill_speed": "200",
-	"support_base_pattern": "rectilinear",
-	"support_interface_pattern": "rectilinear",
-	"compatible_printers": [
-		"IdeaFormer IR3 V2 0.4 nozzle"
-	]
-}

resources/profiles/IdeaFormer/process/fdm_process_common.json

@@ -1,106 +0,0 @@
-{
-	"type": "process",
-	"name": "fdm_process_common",
-	"from": "system",
-	"instantiation": "false",
-	"reduce_crossing_wall": "0",
-	"max_travel_detour_distance": "0",
-	"bottom_surface_pattern": "monotonic",
-	"bottom_shell_thickness": "0",
-	"bridge_speed": "50",
-	"brim_width": "5",
-	"brim_object_gap": "0.1",
-	"compatible_printers": [],
-	"compatible_printers_condition": "",
-	"print_sequence": "by layer",
-	"default_acceleration": "1000",
-	"initial_layer_acceleration": "500",
-	"top_surface_acceleration": "1000",
-	"travel_acceleration": "1000",
-	"inner_wall_acceleration": "1000",
-	"outer_wall_acceleration": "700",
-	"bridge_no_support": "0",
-	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0",
-	"enable_arc_fitting": "0",
-	"wall_infill_order": "inner wall/outer wall/infill",
-	"infill_direction": "45",
-	"sparse_infill_density": "15%",
-	"sparse_infill_pattern": "crosshatch",
-	"initial_layer_print_height": "0.2",
-	"infill_combination": "0",
-	"infill_wall_overlap": "25%",
-	"interface_shells": "0",
-	"ironing_flow": "10%",
-	"ironing_spacing": "0.15",
-	"ironing_speed": "30",
-	"ironing_type": "no ironing",
-	"reduce_infill_retraction": "1",
-	"filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[initial_tool]}_{printer_model}_{print_time}.gcode",
-	"detect_overhang_wall": "1",
-	"slowdown_for_curled_perimeters": "1",
-	"overhang_1_4_speed": "0",
-	"overhang_2_4_speed": "50",
-	"overhang_3_4_speed": "30",
-	"overhang_4_4_speed": "10",
-	"line_width": "110%",
-	"inner_wall_line_width": "110%",
-	"outer_wall_line_width": "100%",
-	"top_surface_line_width": "93.75%",
-	"sparse_infill_line_width": "110%",
-	"initial_layer_line_width": "120%",
-	"internal_solid_infill_line_width": "120%",
-	"support_line_width": "96%",
-	"wall_loops": "3",
-	"print_settings_id": "",
-	"raft_layers": "0",
-	"seam_position": "aligned",
-	"skirt_distance": "2",
-	"skirt_height": "3",
-	"min_skirt_length": "4",
-	"skirt_loops": "0",
-	"minimum_sparse_infill_area": "15",
-	"spiral_mode": "0",
-	"standby_temperature_delta": "-5",
-	"enable_support": "0",
-	"resolution": "0.012",
-	"support_type": "normal(auto)",
-	"support_on_build_plate_only": "0",
-	"support_top_z_distance": "0.2",
-	"support_bottom_z_distance": "0.2",
-	"support_filament": "0",
-	"support_interface_loop_pattern": "0",
-	"support_interface_filament": "0",
-	"support_interface_top_layers": "2",
-	"support_interface_bottom_layers": "2",
-	"support_interface_spacing": "0.5",
-	"support_interface_speed": "80",
-	"support_base_pattern": "default",
-	"support_base_pattern_spacing": "2.5",
-	"support_speed": "150",
-	"support_threshold_angle": "30",
-	"support_object_xy_distance": "0.35",
-	"tree_support_branch_angle": "30",
-	"tree_support_wall_count": "0",
-	"detect_thin_wall": "0",
-	"top_surface_pattern": "monotonicline",
-	"top_shell_thickness": "0.8",
-	"enable_prime_tower": "1",
-	"wipe_tower_no_sparse_layers": "0",
-	"prime_tower_width": "60",
-	"xy_hole_compensation": "0",
-	"xy_contour_compensation": "0",
-	"layer_height": "0.2",
-	"bottom_shell_layers": "3",
-	"top_shell_layers": "4",
-	"bridge_flow": "1",
-	"initial_layer_speed": "45",
-	"initial_layer_infill_speed": "45",
-	"outer_wall_speed": "45",
-	"inner_wall_speed": "80",
-	"sparse_infill_speed": "150",
-	"internal_solid_infill_speed": "150",
-	"top_surface_speed": "50",
-	"gap_infill_speed": "30",
-	"travel_speed": "200"
-}

resources/profiles/Kingroon.json

@@ -1,7 +1,7 @@
 {
 	"name": "Kingroon",
 	"url": "https://kingroon.com/",
-	"version": "02.04.00.03",
+	"version": "02.04.00.04",
 	"force_update": "1",
 	"description": "Kingroon configuration files",
 	"machine_model_list": [

resources/profiles/Kingroon/machine/Kingroon KLP1.json

@@ -5,6 +5,8 @@
 	"nozzle_diameter": "0.4",
 	"machine_tech": "FFF",
 	"family": "Kingroon",
+	"bed_model": "klp1_bed.stl",
+	"bed_texture": "Kingroon_buildplate.svg",
 	"hotend_model": "",
 	"default_materials": "Generic ABS @System;Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic ASA @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System"
 }

resources/profiles/Kingroon/machine/Kingroon KP3S 3.0.json

@@ -5,8 +5,8 @@
 	"nozzle_diameter": "0.4",
 	"machine_tech": "FFF",
 	"family": "Kingroon",
-	"bed_model": "kp3s_bed.stl",
+	"bed_model": "mini_bed.stl",
-	"bed_texture": "Kingroon_buildplate.png",
+	"bed_texture": "Kingroon_buildplate.svg",
 	"hotend_model": "",
 	"default_materials": "Generic ABS @System;Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic ASA @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System"
 }