When running under XWayland (Wayland sessions with GDK_BACKEND=x11),
WebKit2GTK's compositing mode can fail silently, causing the Setup
Wizard WebView to freeze or render blank. This leaves users stuck on
the "Loading......" screen indefinitely.
Changes:
- Set WEBKIT_DISABLE_COMPOSITING_MODE=1 to force software rendering,
matching the fix used by BambuStudio
- Enable the 20-second timeout fallback in load.js so the wizard
proceeds even if the C++ -> JavaScript signal fails
* Fix active filament preset not matching wizard selection on first run
After completing the setup wizard with only a non-PLA filament selected
(e.g. Generic ABS), the active filament preset defaulted to Generic PLA
instead of the user's selection. This happened because load_presets()
falls back to Generic PLA when the initial printer differs from the
preferred printer, and the first_added_filament override was disabled.
Add post-load correction in apply_config() that switches the active
filament to the first compatible wizard-selected filament when the
current active filament is not in the wizard selection. Also fix the
guide JS (22.js, 23.js) to use the filalist attribute for building
the filament array, and add platform-specific build test commands to
CLAUDE.md.
* Replace @System filaments with vendor-specific overrides in wizard
When the wizard selects a generic filament like "Generic ABS @System",
check if a vendor-specific override exists (e.g. BBL "Generic ABS")
and use that instead. This ensures printer-tuned profiles are preferred,
preventing load_installed_filaments from adding unwanted BBL defaults.
When printers from the default bundle are also selected, both variants
are kept since those printers need the @System version.
Also adds diagnostic logging for filament loading in LoadProfileFamily.
* Guard against persisting presets for Default Printer and fix filament override logic
Prevent export_selections from saving stale preset settings for the
built-in "Default Printer" placeholder, which is only the initial state
before a real printer is loaded. Also require a non-default vendor printer
to be selected before replacing @System filaments with vendor-specific
overrides in the wizard, avoiding incorrect filament substitution when
only the default bundle is present.
layer_height_profile_adaptive() was using object_print_z_height()
(shrinkage-compensated) to bound the profile, but
update_layer_height_profile() validates against
object_print_z_uncompensated_max. When shrinkage compensation is
active, the mismatch causes the adaptive profile to be silently
cleared every frame and replaced with flat layers.
Use object_print_z_uncompensated_height() instead, matching both
the validator and the existing layer_height_profile_from_ranges()
implementation which already uses the uncompensated value.
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
Replaced GitHub wiki URLs with new orcaslicer.com documentation links for several hints to provide more accurate and up-to-date references.
Co-authored-by: yw4z <yw4z@outlook.com>
* Add overhang_reverse config to calibration routines
Set the 'overhang_reverse' configuration option to false in both calib_temp and calib_retraction functions to ensure consistent calibration behavior.
* Disable overhang_reverse in calib_pa function
Adds a line to set the 'overhang_reverse' configuration option to false when running the calib_pa function, ensuring this feature is disabled during calibration.
* Disable reverse on even for PA Tower
* Remove unncesary overhang_reverse disablers
* Update Plater.cpp
Update Plater.cpp
* Update Plater.cpp
# Description
<!--
> Please provide a summary of the changes made in this PR. Include details such as:
> * What issue does this PR address or fix?
> * What new features or enhancements does this PR introduce?
> * Are there any breaking changes or dependencies that need to be considered?
-->
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the changes made in this PR.
-->
Changed the help link for the 'symmetric_infill_y_axis' option from 'strength_settings_patterns#zig-zag' to 'strength_settings_infill#symmetric-infill-y-axis' to provide more accurate documentation.
