Every remaining legacy filament_id outside the BBL/QD_* islands re-derives
from its product triple (filament_vendor / filament_type / family name),
completing the content-addressed id model of filament_id_plan_v3.md:
- Relocation pre-step: 14 fdm_filament_* template forks (Cubicon x3,
Prusa x6, RH3D x6 minus the pc fork already re-homed) stop declaring
ids; the 16 presets that rode Prusa's forks now declare the id they
already resolved (verified zero effective-id drift over all 5892
instantiated presets).
- --drop-redundant-ids: 6 Custom/MyToolChanger generics drop copied GF
ids and ride their OFL families.
- --remint over all 62 non-island vendors: 2647 declarations re-derived;
identical products converge cross-bundle (showcase: PolyLite PLA is now
OF5CgdDq in OrcaFilamentLibrary, Qidi, OrcaArena and Snapmaker).
- Prusament @XL completions surfaced by the relocation: filament_vendor
["Prusa Polymers"] on the 8 @XL declarers; Prusament PA-CF typed
PA11-CF (the product is Prusament PA11CF) and PC-CF typed PC-CF
(-CF family typed as base polymer); each family converges on one id.
- Succession: 331 ids retired with mode-rule successors, 355 never-shipped
v1 mints forgotten with chain splicing, 151 GF-shaped ids released to
the island space with hints, 27 curated BBL-generic -> OFL-generic
hints (GFL99 -> OFDSrzZ8 class). New --retire "OLD=NEW" maintenance
mode records lineage for OGFC99/OGFG99/OGFN99 (the shipped ids of OFL's
Generic PC/PETG/PA in released versions, whose claims migrated in v3.1
while Cubicon's inert fork declarations kept them alive).
- Retiring the P-hex system ids removes the last system ids from
check_ams_filament_valid's destructive P-gate.
- AMS-ambiguity fixes surfaced by convergence (validator -f): 4 presets
riding another family's id through inherits now declare their true
family id (Elegoo Generic ASA-CF/PETG-CF, Snapmaker PolyLite Dual PLA /
PolyLite J1 PLA); 9 Cubicon @base presets and Dremel Generic PLA, which
duplicate their per-printer variants on the same printers, split onto
the salt-1 iteration of their triple (sanctioned by the mint-conformance
check; --remint now leaves salt-conformant declarations alone).
Gates: assign_filament_ids --check 0; orca_extra_profile_check 0;
116 python unit tests; config-equivalence over all 5892 instantiated
presets (byte-identical configs except the 14 sanctioned Prusament
vendor/type corrections; setting_id and compatible_printers unchanged;
per-family convergence and ledger conservation verified); profile
validator base/-f/-r(BBL)/-r(Qidi) all green; libslic3r_tests 48610
assertions; Moonraker OFL generic map check; custom-preset fixture
archives v1.9.0-v2.4.1.
Phase v3.1 of filament_id_plan_v3.md: every OFL-declared filament_id
re-derives from its product triple; the succession ledger absorbs the old
ids. Config-equivalence verified: flattened effective configs differ ONLY
in filament_id (284 consistent old->new changes tree-wide, including every
vendor preset that rides an OFL family), zero config/compatible_printers/
setting_id drift.
Structural pre-step (id-value-neutral, verified): OFL generic family ids
move from the shared fdm_filament_* template bases onto the product-named
"Generic X @System" presets, so the v3 triple's family component is the
product name, not an internal file name (12 relocations; 2 dead duplicate
declarations on fdm_filament_pa/pet pruned; every consumer chain itemized
first - the +12 instantiated_with_id entries are this deliberate pattern,
matching the 11 generics that already declared on @System).
fdm_filament_pc keeps its declaration this phase: 7 Prusa presets (Prusa
Generic PC, Prusament PC Blend) inherit it directly and re-home in the
v3.2 Prusa worksheet; its transitional id is documented in the plan.
Re-mint: 301 declarations re-derived (e.g. Generic PLA OGFL99 ->
OFDSrzZ8 = mint("filament_product/Generic/PLA/Generic PLA")). Snapshot:
1477 ids (+300/-292). Ledger:
- 230 shipped ids retired with mode-rule successors (OGF* library ids,
OFLSBS99, DREMC/FILAR/AliZ/eSUN/... legacy strings). DREMC010 had been
shared by a PPA-CF and a TPU family - a data bug this split resolves;
its successor follows its only shipped claim (DREMC PPA-CF).
- 25 GF-shaped ids OFL had copied from the Bambu catalog (GFOT00x
Overture, GFSEP0xx) are RELEASED to the BBL island space with hints at
the re-minted families - never retired, so a future legitimate BBL
catalog addition is never blocked; plus an explicit GFOT001 ->
OFxA1p01 hint (Overture PLA Pro, still live in BBL).
- 37 never-shipped v1 branch mints dropped from lineage
(--forget-never-shipped; they exist in no release, no forwarding
needed).
- OGFC99/OGFG99/OGFL96/OGFN99/OGFSNL08 stay live (still declared by
vendor bundles); they retire in v3.2 when those declarers re-mint.
Gates: 106 unit tests OK; --check exit 0; orca_extra_profile_check exit 0;
validator -l 2 / -f tree-wide / -r BBL+Qidi exit 0; Moonraker OFL map
check resolves all 29 aliases against the re-minted presets; flatten
equivalence pre/post as above; snapshot regen idempotent.
Implements phase v3.0 of filament_id_plan_v3.md - tooling and client
prerequisites. No filament_id values change in this commit.
Tooling (scripts/assign_filament_ids.py; 106 unit tests):
- The mint key becomes "filament_product/<filament_vendor>/<filament_type>/
<family_name>", resolved loader-faithfully from the declarer's flattened
config - bundle-independent and content-addressed; identity fixes re-id
by design and are made safe by the succession ledger. --mint now takes
the triple.
- The snapshot gains "triples" and "triple_exceptions" sections, folded
into the equality gate: any vendor/type/name change surfaces as a
reviewable snapshot diff. Check 3 rewritten to triple-mint conformance
with (id, triple) grandfathering; check 5 generalized from OFL generics
to every OFL-riding vendor preset; new check 8 (triple integrity) and
check 9 (succession integrity).
- The retired ledger moves to resources/profiles/retired_filament_ids.json
so it ships with the app; schema {claims, successor} plus cross-island
"hints". The 14 v1 entries are migrated with mode-rule successors.
Vanished ids in a foreign island's space (GF*/QD_*) are RELEASED with a
hint instead of retired: the island catalog owns them and may
legitimately (re)ship them, which check 4 must never block.
- New maintenance modes: --remint VENDOR, --drop-redundant-ids VENDOR,
--add-hint "OLD=NEW", and --update-snapshot --forget-never-shipped FILE
(never-shipped ids drop from lineage; chains splice through them).
Runtime (C++):
- Succession helpers in libslic3r/Preset (pure chain-follow + lazy ledger
load from resources), consulted only on resolution miss in
get_filament_by_filament_id, both AMS sync predicates,
add_ams_filaments, setting_id_to_type, and the calibration-history
lookup; behavior is byte-identical while the ledger has no matching
entry. Catch2 coverage in tests/libslic3r.
- W1 hardening: check_ams_filament_valid no longer remote-wipes trays or
rewrites temps for P-shaped ids that a system preset carries (ten such
system ids ship today); the size==8 && [0]=='P' assert is relaxed; the
unguarded filament_list find deref in the temp-equation check returns
non-destructively on a miss.
- MoonrakerPrinterAgent: the 23 hardcoded OFL generic ids are replaced by
a runtime lookup of "Generic <family> @System" (id-equivalent on
today's shipped profiles, follows future re-mints automatically);
scripts/test_moonraker_lane_data.py derives its expectations from the
shipped profiles and gains --check-ofl-map.
Profile data (W3 - type is now a key component, so type bugs are fixed
before any re-mint):
- 17 same-name-different-type groups corrected across 50 files (OFL
Generic PETG-CF/PE-CF/PP-CF; Flashforge ASA Basic/ASA-CF/ABS-CF/HIPS/
PAHT-CF/PLA Silk; FusRock PAHT; Creality Generic PA6-CF; InfiMech PETG;
Anycubic TPU 95A / TPU for ACE; Prusa Generic PA-CF/PLA-CF) - every
value validated against MaterialType::all(); 3 Snapmaker U1 roots gain
their missing filament_vendor. Flattened-config equivalence vs the
previous commit: exactly the 54 intended diffs, zero BBL.
- doc/developer-reference/filament_id.md rewritten for the v3 rule.
Ambiguous type divergences (Prusa Generic TPU/TPU HF FLEX-vs-TPU, FusRock
S-Multi/S-PAHT) and all same-type vendor-tag divergences are deferred to
the v3.2 vendor worksheets, catalogued with analysis.
The custom-preset fixture validation (check_profiles.yml step 5, run locally
against the v2.3.2/v2.4.0/v2.4.1 archives) caught a real regression in the
previous Cubicon fix: those archives contain user presets whose inherits
names the @base presets directly ("can not find parent Cubicon ABS @base").
A system preset with instantiation:false is not added to the preset
collection, so flipping the nine @bases was equivalent to deleting their
names - exactly the user-preset drop hazard the migration rules forbid.
Repair: restore all nine @bases byte-identically to their pre-flip state
(instantiated, setting_id, original P510cf* ids; Cubicon PC @base keeps its
minted OFnLnZQo from the copy-paste fix). The AMS ambiguity is instead
resolved Dremel-style: each family's three passthrough variants share one
fresh variant-tier mint as own keys, so on every printer the base and the
variant carry different ids. Zero preset-set change, zero config change,
user presets and fixtures resolve exactly as before the migration.
Verified: fixture archives v2.3.2/v2.4.0/v2.4.1 no longer report missing
parents; config-equivalence holds; orca_extra_profile_check.py exit 0;
assign_filament_ids.py --check exit 0; validator -l 2 exit 0; tree-wide
extended -f still exit 0.
Phase 2 completion - Volumic, Ratrig, Chuanying, Afinia, Eryone, FLSun,
Tiertime, Blocks, CONSTRUCT3D, Co Print, CoLiDo, DeltaMaker, Ginger
Additive, OrcaArena, Peopoly, Wanhao France, iQ. All are P1 copy-paste or
small structural fixes; owners keep their ids by Bambu-catalog/OFL/historic-
introducer precedence, impostor families get fresh deterministic mints,
zero effective-config change:
- Volumic 10 mints (ABS/ASA/PP, PETG/PCTG/ESD, PLA/UNIVERSAL, PA/PPS lines);
Ratrig 10 (BigNozzle/PunkFil lines off the Generic line's ids); Chuanying
8 (plus 3 redundant own-id lines removed so parents' minted ids flow to
the 0.25-nozzle variants); FLSun 4 (S1/T1 High Speed + Silk); Peopoly 4
(Lancer lines off Generic PLA's GFL99); Afinia 3 (Value PLA/ABS+/Value ABS
inside the frozen GFx##_## scheme); Co Print 3 (ABS/PETG/TPU off GFL99).
- Tiertime: Generic SBS had copy-pasted Generic PLA's ids on both printer
lines - one family mint on both variants collapses the split. Eryone: PP
copy-pasted PETG-CF's EFL43 (same introducing commit) - PP minted.
Blocks: ASA-CF copy-pasted PLA-CF's BSFI010 - ASA-CF minted. CONSTRUCT3D:
High Flow PETG minted off GFG99. CoLiDo: both claimants of the invented
GFA99 re-minted. DeltaMaker: Brand PLA minted off GFL99. OrcaArena:
Generic PLA Silk minted; the Bambu-clone Arena PLA Silk keeps GFA05
(catalog precedence). iQ: Grauts HPP4GF25 minted off Fiberthree's IQM1.
- Ginger Additive (P5): the shared fdm_filament_common template carried
P510eff9; moved onto the two pellet families (Generic PETG keeps it as
first claimant, Generic PLA minted), template key removed after verifying
every inheritor still resolves an id.
- Wanhao France (P4): YUMI PLA Bowden stops over-claiming the six
direct-drive printers covered by YUMI PLA Direct Drive (trim only, no
mints).
Verified: config-equivalence gate zero unexpected diffs; extra check exit 0;
--check exit 0; validator -l 2 exit 0; and with all 30 vendor migrations
now applied, the extended validator's -f check is clean TREE-WIDE
(0 ambiguity errors, down from 1256 baseline / 16448 with the library-aware
extension); -r exit 0 for BBL and Qidi.
Phase 2 long-tail migrations (25 collision groups), zero effective-config
change:
Snapmaker (11 + the tree's one live library-cross group): three Benchy demo
presets coexisting via compatible_prints gating (invisible to the -f check)
get their own mints; the TPE/TPU-High-Flow lines riding shared bases get
family mints across the plain/U1/Dual/J1 variants; 'Snapmaker PLA Matte @U1'
minted; 'Snapmaker PET @Dual' unified onto its own family root id;
'Snapmaker PA-CF @U1' had its compatible_printers triple-duplicated
(self-collision) - deduplicated. The PolyTerra J1/Dual PLA presets that
re-exposed the library's PolyTerra PLA (alias rename) get family mints while
'PolyTerra PLA @0.2 nozzle' keeps the library id via inheritance. Fiberon
families keep their authentic byte-copied Bambu catalog ids (sanctioned
multi-vendor brand sharing, frozen in the snapshot).
FlyingBear (8): every preset carries an own-key Bambu generic id; owners
keep theirs, 15 impostor families (S1/Ghost7/Hyper lines) re-minted
family-atomically - '@S1' and '@Ghost7' siblings move together (20 edits).
Sovol (6): the GFL99 copy-paste epidemic. The five same-alias
'Generic * @Sovol SV08 MAX' tunings just DROP their wrong own-id lines so
the library family ids flow through inheritance (alias-shadow-verified);
Generic PLA Silk / SUNLU PETG adopt their library family ids as own keys
(their inherits point at other families, so deletion would collide); the 21
dedicated Sovol/Polymaker families get fresh mints (23 edits).
'Sovol SV07 PLA' keeps GFL99 unambiguously (sole claimant on SV07), frozen
in the snapshot.
Verified: config-equivalence gate zero unexpected diffs; extra check exit 0;
--check exit 0; validator -l 2 exit 0; extended -f -v Snapmaker/FlyingBear/
Sovol all exit 0.
Phase 2 long-tail migrations (56 collision groups across six vendors), zero
effective-config change except where stated:
Cubicon (17): 'Cubicon PC @base' verbatim-copied PA-CF's P510cfd0 at
introduction (90a6c53ad5; PC was the config-light stub) - the PC family gets
a fresh mint via its root. The other groups were all one shape: nine @base
presets instantiated on exactly the two printers their dedicated variants
cover with byte-identical passthrough configs, so no compatible_printers
trim exists that CI would accept (instantiated presets must claim a
printer). Fix: flip the nine @bases to instantiation:false and drop their
setting_ids (bases carry none by convention). Every printer keeps an
identical-config selectable preset per family - verified programmatically
before flipping; no machine default_materials references an @base name.
Dremel (3): 'Dremel Generic PLA' is deliberately selectable alongside its
per-printer variants (#6837 re-exposed it), and the variants carry real
overrides - a genuine AMS ambiguity with no config-neutral trim. The three
variants share the fresh family mint OFUYjPc4 as own keys; the root keeps
GFL99. A deliberate same-family id split (P8 shape): Dremel has no device
ecosystem consuming filament_id, and every alternative is a user-visible
regression of #6837. default_materials resolve unchanged.
Anycubic (14): copy-paste/generic-riding across three id eras; 2022-era
Anycubic Generic ABS/PETG/PLA/TPU keep the catalog ids, 13 families
re-minted atomically (72 edits incl. 48 forced same-family re-ids), retiring
the invented GFABS/GFL92/GFL93/GFPLA* space-containing ids.
Artillery (8): GFL99 umbrella + P-hex copy-pastes; Artillery Generic PLA
keeps GFL99, Artillery PLA keeps Pfcf9c4c, 17 families minted (52 edits),
P284941e retired.
InfiMech (14): pure verbatim Bambu-generic copy-paste; the six InfiMech
Generic owners keep their ids, 15 impostor families minted (34 edits).
Creality (8): HF generics copy-pasted GFL99 + id-less sub-brand lines riding
keeper families; owners keep their git-verified ids, 8 families minted (17
edits, own-key layout for members inheriting heterogeneous per-series
parents).
Verified per batch: config-equivalence gate zero unexpected diffs (the nine
Cubicon @base instantiation flips are the only preset-set changes, reviewed
above); orca_extra_profile_check.py exit 0; assign_filament_ids.py --check
exit 0; validator -l 2 exit 0; extended -f exit 0 for all six vendors
(-v Cubicon/Dremel/Anycubic/Artillery/InfiMech/Creality); 14 fully-vanished
ids appended to the retirement ledger.
Phase 2 of the filament_id cleanup (31 collision groups, all one mechanism:
material-class ids on shared fdm_filament_* templates collapsing HF/-CF/
Prusament lines onto one id, plus 3 overclaims). 18 new @base family roots
(owner generic keeps the legacy id, 12 impostor families get deterministic
mints), 72 config-neutral inherits repoints, 6 template filament_id keys
removed (only where every id-less inheritor is covered by a new root;
fdm_filament_asa/pc keep theirs for the frozen Prusament @XL riders),
3 compatible_printers trims on MINIIS printers covered by dedicated @MINIIS
variants. Frozen name-shaped and _NN per-variant ids stay byte-identical.
Verified: config-equivalence gate zero unexpected diffs; extra check exit 0;
--check exit 0; validator -l 2 exit 0; extended -f -v Prusa exit 0 (was 31
groups / 1035 printer-level errors on the pre-apply copy).
Phase 2 of the filament_id cleanup (37 collision groups; one systematic
mistake: every commercial line inherits the material-class @base and its
E<MAT>B00 id). 23 new per-line @base roots with fresh deterministic mints
(no per-line roots existed, contrary to the plan text), 155 inherits
repoints, 23 index entries inserted between the parent @base and the line's
members (load-bearing order), 6 in-place mints on single-member generic
derivatives.
The @base-owning families keep their ids (Elegoo PLA=EPLAB00 etc.); 2 forced
family-atomic re-ids outside collision groups (Elegoo Rapid TPU 95A @EN2
Series/@Elegoo Giga follow their family). Residual 2-family shares
(GPETGB00/GASAB00 with the Centauri -CF lines, pure-template ETPUB00/
EPAHTB00) are printer-disjoint, validator-clean, and frozen in the snapshot.
Verified: config-equivalence gate zero unexpected diffs; extra check exit 0;
--check exit 0; validator -l 2 exit 0; extended -f -v Elegoo exit 0 (was 37
groups / 1332 printer-level errors on the pre-apply copy).
Phase 2 of the filament_id cleanup (69 within-vendor collision groups plus
the 9 live library-cross groups on Creator 5/5 Pro). 507 filament_id edits +
12 compatible_printers trims (G3U 0.6/0.8 bases and HS bases over-claiming
printers covered by dedicated variants):
- The FFG01 umbrella (~140 presets across many families) is broken up: the
git-verified introducing family (Flashforge Generic PLA) keeps FFG01, and
83 other families get fresh deterministic mints; the GFB99/GFG99/GFL99
G3U-era block is resolved the same way.
- Flashforge-branded presets riding OrcaFilamentLibrary generic ids
(OGFB99/OGFG99/OGFL98/OGFL99/OGFN96/OGFN98/OGFS98/OGFS99/OGFU99) get their
own family mints; true generic tunings (Generic PLA / PLA Silk / BVOH)
keep the library id with the library base name (alias-shadow-consistent).
- Layout deviation, signed off: minted ids are declared as own keys on every
instantiated member instead of new @base roots, because these families
inherit up to six heterogeneous per-era umbrella parents and
config-preserving roots would add ~80 artificial files. The snapshot
ledger records the resulting instantiated_with_id/id_overrides growth,
which is exactly the ratchet mechanism for keeping such shapes visible.
Verified: config-equivalence gate zero unexpected diffs; extra check exit 0;
--check exit 0; validator -l 2 exit 0; extended -f -v Flashforge exit 0
(was 69 groups + 9 library-cross).
Phase 1 of the filament_id cleanup (filament_id_plan.md section 5): resolve the
16 library-internal ids that covered several different materials at once and
were visible on every printer of every vendor (empty compatible_printers =
compatible with all).
- 7 existing @base roots get their copy-pasted id replaced with a fresh
deterministic mint (Elas PLA/ASA copy-pastes of Bambu-mirror ids, eSUN
copy-pastes incl. the OGFL06 eSUN PLA-Marble / Fiberon PETG-ESD polymer
mismatch).
- 30 rootless families (23 Elegoo product lines riding the material-class
E*B00 ids, Generic PETG HF / PETG-CF / PP-CF / PP-GF / PE-CF / PLA Matte
riding their parent generic's template id, PolyLite Dual PLA) each get a new
config-equivalent @base root carrying the minted id, inheriting the family's
previous parent; members re-pointed; index entries inserted before the
@System entries (loader's filament_id map is built in file order).
- Keepers by precedence stay byte-identical: Bambu-catalog mirrors
(OGFA00/OGFB01/OGFG00, PolyLite/Overture/Fiberon lines), the OFL generics
(OGFG99/OGFL99/OGFP97/OGFP99), and the Elegoo root-owning families.
Verified: config-equivalence gate — flattened effective configs of all 5892
instantiated presets are byte-identical to pre-migration except the prescribed
filament_id changes; orca_extra_profile_check.py exit 0;
assign_filament_ids.py --check exit 0; validator -l 2 exit 0 (66 vendors);
extended validator -f -v OrcaFilamentLibrary exit 0 (16 collision ids
resolved) and -f -v BBL exit 0 (all 26 BBL-shared ids are same-material
mirrors, alias-shadowed on every overlapping BBL printer — no BBL file
touched). Snapshot: +37 minted ids, id_overrides +30 (new roots override
their template parents by design).
# Description
This PR expands profile validation so we can catch backward
compatibility issues with custom presets generated by older OrcaSlicer
releases. It also adds missing `renamed_from` metadata for presets that
were renamed or moved, so older user presets can resolve their original
parent names against the current system profiles.
## Background
Many users have reported missing preset issues after upgrading past
2.4.1. Investigation showed two common causes:
- preset lookup and compatibility checks did not always account for
`renamed_from`
- some renamed base presets were missing the old preset name in their
`renamed_from` metadata
The existing profile workflow validates the current system profile tree
and a single nightly-generated custom preset bundle. That is useful for
catching current profile errors, but it does not validate user presets
generated by older OrcaSlicer versions against the current system
profiles. As a result, older missing-parent compatibility gaps can slip
through.
## Changes
- Update `check_profiles.yml` to validate historical custom preset
fixtures from `OrcaSlicer/OrcaSlicer-profile-validator`.
- Download the fixture manifest from the public `fixture-archive`
release.
- Validate each `orca_custom_presets_<version>.zip` fixture
independently against the current PR's `resources/profiles`.
- Generate per-version validation logs and upload them as workflow
artifacts.
- Fail profile validation if any historical fixture version fails.
- Add missing `renamed_from` aliases for renamed/moved presets found by
the historical fixture validation.
## Profile Compatibility Fixes
This PR adds aliases for older parent names including:
- `0.20mm Bambu Support W @BBL X1C` -> `0.20mm Standard @BBL X1C`
- `Bambu PLA Impact @BBL X1C` -> `Bambu PLA Impact @System`
- `Ginger Generic rPLA` -> `Ginger Generic PLA`
- `Ginger Generic rPETG` -> `Ginger Generic PETG`
- legacy `Panchroma PLA Stain` BBL filament names -> current `Panchroma
PLA Satin` names
- legacy Elegoo casing/name variants such as `Elegoo RAPID PLA+`,
`Elegoo RAPID PETG`, `Elegoo RAPID PETG+`, and `Elegoo PETG Pro @System`
## Validation Flow
The custom preset validation step now:
1. Downloads `manifest.json` from the `fixture-archive` release.
2. Iterates over every fixture listed in the manifest.
3. Copies the current branch's `resources/profiles` into a temporary
profile tree.
4. Removes any existing `user` directory from that temporary tree.
5. Unzips exactly one historical fixture into the temporary tree.
6. Runs `OrcaSlicer_profile_validator -p <temp profile tree> -l 2`.
7. Writes a version-specific log and a consolidated summary.
This keeps validation scoped per fixture version and avoids mixing
generated user presets from different OrcaSlicer releases.
## Fixture Source
Historical fixtures are stored as public release assets in:
`OrcaSlicer/OrcaSlicer-profile-validator`, release tag `fixture-archive`
Each release asset is expected to be named like:
```text
orca_custom_presets_v2.4.1.zip
```
## Testing
Validated locally with:
- current system profile validation
- BBL filament subtype validation
- historical custom preset fixture validation
- extra profile JSON check in a clean profile tree
The affected historical fixture set passed after adding the missing
`renamed_from` aliases.
The release manifest controls which fixture versions are validated.
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
* validator: detect duplicate filament subtype per printer (opt-in)
A filament is matched from the AMS by (filament_id + printer compatibility);
if two compatible filament presets for one printer share a filament_id, the
match is ambiguous and the runtime silently picks whichever loads first.
Add PresetBundle::check_duplicate_filament_subtypes(), gated behind a new
has_errors(check_duplicate_filament_subtypes) parameter and the validator's
-f/--check_filament_subtypes flag (off by default). For each system printer it
groups its vendor's compatible filament presets by filament_id and errors on
any group of 2+, reporting each preset as a clickable file:// URI with a single
"how to fix" hint. CI runs it for BBL only (-v BBL -f) until the other vendors'
profiles are cleaned up.
* profiles: fix ambiguous BBL filament matches
Resolve the duplicate-filament-subtype errors flagged by the validator:
- align compatible_printers with Bambu Studio where Orca over-claimed a nozzle
that already has a dedicated preset (Bambu PLA Basic/Matte/ABS @BBL H2DP;
Bambu ASA/PETG HF @BBL H2DP 0.6 nozzle; Fiberon PETG-ESD @BBL X1)
- fix a copy-pasted printer name in Overture Matte PLA @BBL A1M 0.2 nozzle
- fix a wrong inherits in Panchroma PLA Silk @BBL X1C 0.2 nozzle (was inheriting
Panchroma PLA @base, giving it filament_id GFPM001 instead of GFPM004)
Bump BBL profile version.
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
---------
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* profiles: enforce globally-unique, per-vendor-namespaced setting_id
Many non-Bambu vendors copied Bambu's generic setting_ids (GFSA04 alone
appeared in 1557 files), so setting_id was not globally unique. This
namespaces every vendor's ids and reserves Bambu/OrcaFilamentLibrary space.
- Reserve "G*" (Bambu) and "O*" (OrcaFilamentLibrary) id spaces.
- Assign each other vendor a 2-char prefix (first+last letter, collision
resolved) and renumber every instantiated preset to <PREFIX><NNNN>.
- Strip setting_id from base profiles (instantiation:false) per Bambu's
convention; assign one to instantiated presets that lacked it.
- Remove the pre-existing misspelled "settings_id" key (91 files).
- filament_id is left untouched (it is a per-material id).
- Add one-time migration script scripts/assign_vendor_setting_ids.py with a
persisted registry resources/profiles/vendor_prefixes.json. Re-runs freeze
existing ids; only new vendors/profiles get new ids.
- Bump version in each changed vendor index file.
- Extend scripts/orca_extra_profile_check.py with a CI guard: global
uniqueness, in-namespace, no base setting_id, no gaps, no settings_id typo.
7425 profile files changed across 61 vendors; 0 cross-vendor collisions;
validator clean; migration idempotent. BBL and OrcaFilamentLibrary id spaces
untouched.
* profiles: add setting_id authoring guide for new vendors / profiles
* profiles: drop in-repo README; setting_id guide now lives in the wiki
* profiles: derive setting_id deterministically from vendor/type/name
* bump profile version
fix(profiles): add printable_area to fdm_U1 so all nozzle variants inherit correct 270x270 bed
The 0.2/0.6/0.8 nozzle profiles inherit from fdm_U1 which had no
printable_area defined, causing them to fall back to a smaller default
bed size. The 0.4 profile was the only one that set it explicitly.
Move printable_area and printable_height to the shared parent (fdm_U1)
so all Snapmaker U1 nozzle variants get the correct 270x270mm bed.
Bump vendor version to trigger profile re-sync on existing installs.
Co-authored-by: ni4223 <ni4223@users.noreply.github.com>
The `@FF AD5M 0.25 nozzle` filament variants carried the base profile's
full printer list (AD5M/AD5M Pro/AD5X 0.4/0.6/0.8) instead of the 0.25
nozzle printers. Combined with base profiles that also listed the AD5X
0.4/0.6/0.8 printers already covered by dedicated `@FF AD5X` variants,
multiple presets with the same alias became compatible with the same
printer. The filament combobox keys presets by full name but displays
them by alias, so these surfaced as duplicate entries (e.g. "Flashforge
PLA Silk", "Flashforge ASA Basic" shown twice).
Fix the `compatible_printers` lists (data only, no settings changed):
- Repoint the 15 `@FF AD5M 0.25 nozzle` variants to the actual 0.25
nozzle printers (Adventurer 5M 0.25 + Adventurer 5M Pro 0.25).
- Remove the redundant AD5X 0.4/0.6/0.8 entries from the base profiles
where dedicated AD5X variants already exist.
- Bump Flashforge profile version to 02.04.00.02.
Each affected filament now resolves to exactly one preset per printer,
and the previously uncovered AD5M 0.25 nozzle printers gain coverage.
* Snapmaker U1: add 0.2mm and 0.8mm nozzle profiles
Add machine and process profiles for the Snapmaker U1's 0.2mm and
0.8mm nozzles, and complete the 0.6mm process lineup. Follows the
same data-only pattern used to add the 0.6 / 0.4+0.6 nozzles in
commit afc3756.
The U1 ships with 0.4, 0.4+0.6 and 0.6 nozzle options today; the 0.2
and 0.8 nozzles are supported hardware but have no profiles, so they
cannot be selected. This adds them the Orca-native way: per-nozzle
machine presets plus a model-file dropdown entry, with their process
profiles filtered in via compatible_printers.
Machine (2): lean presets inheriting fdm_U1, mirroring the existing
SM_U1_06 (0.6) preset and overriding only the per-nozzle values;
setting_ids SM_U1_02 / SM_U1_08.
Process (21): 2 per-nozzle commons (fdm_process_U1_0.2_common,
_0.8_common) holding the nozzle line widths, plus 19 profiles
(0.2: 8, 0.6: 6, 0.8: 5) that inherit their per-nozzle common and
carry their own layer height, matching upstream's factoring. The two
0.24 Standard profiles that shared id GP029 are split into
GP029_06_024 / GP029_08_024.
Model dropdown: machine/Snapmaker U1.json nozzle_diameter
"0.4;0.4+0.6;0.6" -> "0.2;0.4;0.4+0.6;0.6;0.8".
Vendor index: register the new presets in Snapmaker.json.
The existing 0.4 / 0.6 / 0.4+0.6 presets resolve identically before
and after. scripts/orca_extra_profile_check.py and the profile
validator both pass.
* chore(profiles): bump Snapmaker vendor version to 02.04.00.04
Bump the Snapmaker vendor config_version so existing installs pick up the new 0.2mm and 0.8mm U1 nozzle profiles. PresetUpdater only re-imports a vendor bundle when the shipped version is strictly greater than the cached one.
---------
Co-authored-by: ni4223 <ni4223@users.noreply.github.com>
Several Artillery and Flashforge machine profiles set the first-layer nozzle temperature with M104 (set, no wait) immediately before the purge/prime line. The purge then runs before the nozzle reaches temperature, so filament is extruded through a nozzle that is not yet hot enough to melt it. Changed M104 to M109 so the printer waits for the target temperature before purging.
Affected profiles:
- Artillery Sidewinder X3 Plus / X3 Pro / X4 Plus / X4 Pro (0.4 nozzle)
- Flashforge AD5X (0.25/0.4/0.6/0.8)
- Flashforge Adventurer 5M / 5M Pro (0.25/0.8 overrides + shared fdm_adventurer5m_common, which also covers the 0.4/0.6 variants via inheritance)
Refs #4337
* feat: add support for 3MF file format in printer configurations and export options
* fix file extension
* enable 3mf for X Max 4
* disable use_3mf for X Plus 4
* Fixed an issue where `label_object_enabled` was not properly propagated to 3mf
* enable exclude object for Max 4
* remove hardcoded use 3mf for flashforge, move them to the new printer profiles config
* Sync Elegoo profiles from ElegooSlicer
Update vendor Elegoo.json, filament/machine/process trees, and OrcaFilamentLibrary
Elegoo entries. Align machine default material names with existing filament preset names.
* feat: expose filament_name for G-code export filename format
Derive from filament_settings_id for the first active extruder and strip the suffix after @, matching ElegooSlicer so filename_format can use {filament_name}.
* chore: reorder Elegoo entries in OrcaFilamentLibrary
Group Elegoo @base profiles and bump library version to 02.03.02.62.
* sync OrcaFilamentLibrary.json with Elegoo filament profiles
* fix: clean up Elegoo process renamed_from for profile validation
Add single renamed_from only where preset names changed from legacy Orca
names; remove duplicate Rapid @System library entries that conflicted with
ECC2 vendor presets.
* fix(profiles): add missing Elegoo renamed_from for profile validation
CI custom-preset tests still inherit legacy Orca preset names that no
longer exist after the Elegoo bundle update. Add renamed_from on process,
Neptune 4 machines, OrcaFilamentLibrary filaments, and Giga profiles so
inherits resolve again, without changing print parameters.
* fix(profiles,elegoo): resolve renamed presets and CC2 SET_PRINT_STATS_INFO G-code
Resolve legacy preset names through renamed_from when validating presets and loading external projects. Add missing renamed_from aliases for Elegoo Giga process and OrcaFilamentLibrary filaments. Combine TOTAL_LAYER and CURRENT_LAYER in one SET_PRINT_STATS_INFO command on Centauri Carbon 2 (ECC2), Centauri (EC), and Centauri Carbon (ECC) 0.4 nozzle profiles.
* chore(profiles): bump Elegoo and OrcaFilamentLibrary profile versions
Refresh installed profile bundles after renamed_from aliases, CC2 SET_PRINT_STATS_INFO G-code, and Preset.cpp renamed preset resolution fixes.
* Fix junction deviation and jerk settings behavior
Process settings now follow the selected printer's junction deviation
configuration. When machine_max_junction_deviation is enabled,
default_junction_deviation is shown and jerk settings are hidden. When
junction deviation is disabled, jerk settings are restored and
default_junction_deviation is hidden.
Fix a validation issue where junction deviation mismatch warnings could
be reported even when machine_max_junction_deviation was set to 0.
Warnings now apply only when junction deviation is active and point
directly to default_junction_deviation.
Also simplify Motion ability page visibility checks by reusing local
firmware-flavor booleans.
* GUI tweak
- separate Junction Deviation segment
- JD and Jerk stay visible
