Every remaining legacy filament_id outside the BBL/QD_* islands re-derives
from its product triple (filament_vendor / filament_type / family name),
completing the content-addressed id model of filament_id_plan_v3.md:
- Relocation pre-step: 14 fdm_filament_* template forks (Cubicon x3,
Prusa x6, RH3D x6 minus the pc fork already re-homed) stop declaring
ids; the 16 presets that rode Prusa's forks now declare the id they
already resolved (verified zero effective-id drift over all 5892
instantiated presets).
- --drop-redundant-ids: 6 Custom/MyToolChanger generics drop copied GF
ids and ride their OFL families.
- --remint over all 62 non-island vendors: 2647 declarations re-derived;
identical products converge cross-bundle (showcase: PolyLite PLA is now
OF5CgdDq in OrcaFilamentLibrary, Qidi, OrcaArena and Snapmaker).
- Prusament @XL completions surfaced by the relocation: filament_vendor
["Prusa Polymers"] on the 8 @XL declarers; Prusament PA-CF typed
PA11-CF (the product is Prusament PA11CF) and PC-CF typed PC-CF
(-CF family typed as base polymer); each family converges on one id.
- Succession: 331 ids retired with mode-rule successors, 355 never-shipped
v1 mints forgotten with chain splicing, 151 GF-shaped ids released to
the island space with hints, 27 curated BBL-generic -> OFL-generic
hints (GFL99 -> OFDSrzZ8 class). New --retire "OLD=NEW" maintenance
mode records lineage for OGFC99/OGFG99/OGFN99 (the shipped ids of OFL's
Generic PC/PETG/PA in released versions, whose claims migrated in v3.1
while Cubicon's inert fork declarations kept them alive).
- Retiring the P-hex system ids removes the last system ids from
check_ams_filament_valid's destructive P-gate.
- AMS-ambiguity fixes surfaced by convergence (validator -f): 4 presets
riding another family's id through inherits now declare their true
family id (Elegoo Generic ASA-CF/PETG-CF, Snapmaker PolyLite Dual PLA /
PolyLite J1 PLA); 9 Cubicon @base presets and Dremel Generic PLA, which
duplicate their per-printer variants on the same printers, split onto
the salt-1 iteration of their triple (sanctioned by the mint-conformance
check; --remint now leaves salt-conformant declarations alone).
Gates: assign_filament_ids --check 0; orca_extra_profile_check 0;
116 python unit tests; config-equivalence over all 5892 instantiated
presets (byte-identical configs except the 14 sanctioned Prusament
vendor/type corrections; setting_id and compatible_printers unchanged;
per-family convergence and ledger conservation verified); profile
validator base/-f/-r(BBL)/-r(Qidi) all green; libslic3r_tests 48610
assertions; Moonraker OFL generic map check; custom-preset fixture
archives v1.9.0-v2.4.1.
Phase 2 completion - Volumic, Ratrig, Chuanying, Afinia, Eryone, FLSun,
Tiertime, Blocks, CONSTRUCT3D, Co Print, CoLiDo, DeltaMaker, Ginger
Additive, OrcaArena, Peopoly, Wanhao France, iQ. All are P1 copy-paste or
small structural fixes; owners keep their ids by Bambu-catalog/OFL/historic-
introducer precedence, impostor families get fresh deterministic mints,
zero effective-config change:
- Volumic 10 mints (ABS/ASA/PP, PETG/PCTG/ESD, PLA/UNIVERSAL, PA/PPS lines);
Ratrig 10 (BigNozzle/PunkFil lines off the Generic line's ids); Chuanying
8 (plus 3 redundant own-id lines removed so parents' minted ids flow to
the 0.25-nozzle variants); FLSun 4 (S1/T1 High Speed + Silk); Peopoly 4
(Lancer lines off Generic PLA's GFL99); Afinia 3 (Value PLA/ABS+/Value ABS
inside the frozen GFx##_## scheme); Co Print 3 (ABS/PETG/TPU off GFL99).
- Tiertime: Generic SBS had copy-pasted Generic PLA's ids on both printer
lines - one family mint on both variants collapses the split. Eryone: PP
copy-pasted PETG-CF's EFL43 (same introducing commit) - PP minted.
Blocks: ASA-CF copy-pasted PLA-CF's BSFI010 - ASA-CF minted. CONSTRUCT3D:
High Flow PETG minted off GFG99. CoLiDo: both claimants of the invented
GFA99 re-minted. DeltaMaker: Brand PLA minted off GFL99. OrcaArena:
Generic PLA Silk minted; the Bambu-clone Arena PLA Silk keeps GFA05
(catalog precedence). iQ: Grauts HPP4GF25 minted off Fiberthree's IQM1.
- Ginger Additive (P5): the shared fdm_filament_common template carried
P510eff9; moved onto the two pellet families (Generic PETG keeps it as
first claimant, Generic PLA minted), template key removed after verifying
every inheritor still resolves an id.
- Wanhao France (P4): YUMI PLA Bowden stops over-claiming the six
direct-drive printers covered by YUMI PLA Direct Drive (trim only, no
mints).
Verified: config-equivalence gate zero unexpected diffs; extra check exit 0;
--check exit 0; validator -l 2 exit 0; and with all 30 vendor migrations
now applied, the extended validator's -f check is clean TREE-WIDE
(0 ambiguity errors, down from 1256 baseline / 16448 with the library-aware
extension); -r exit 0 for BBL and Qidi.
* profiles: enforce globally-unique, per-vendor-namespaced setting_id
Many non-Bambu vendors copied Bambu's generic setting_ids (GFSA04 alone
appeared in 1557 files), so setting_id was not globally unique. This
namespaces every vendor's ids and reserves Bambu/OrcaFilamentLibrary space.
- Reserve "G*" (Bambu) and "O*" (OrcaFilamentLibrary) id spaces.
- Assign each other vendor a 2-char prefix (first+last letter, collision
resolved) and renumber every instantiated preset to <PREFIX><NNNN>.
- Strip setting_id from base profiles (instantiation:false) per Bambu's
convention; assign one to instantiated presets that lacked it.
- Remove the pre-existing misspelled "settings_id" key (91 files).
- filament_id is left untouched (it is a per-material id).
- Add one-time migration script scripts/assign_vendor_setting_ids.py with a
persisted registry resources/profiles/vendor_prefixes.json. Re-runs freeze
existing ids; only new vendors/profiles get new ids.
- Bump version in each changed vendor index file.
- Extend scripts/orca_extra_profile_check.py with a CI guard: global
uniqueness, in-namespace, no base setting_id, no gaps, no settings_id typo.
7425 profile files changed across 61 vendors; 0 cross-vendor collisions;
validator clean; migration idempotent. BBL and OrcaFilamentLibrary id spaces
untouched.
* profiles: add setting_id authoring guide for new vendors / profiles
* profiles: drop in-repo README; setting_id guide now lives in the wiki
* profiles: derive setting_id deterministically from vendor/type/name
* bump profile version
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces.
This effectively reduces the size by almost 20 MB.
| Current | New |
|---|---|
| 85.2 Mib | 67 Mib |
Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON.
> [!NOTE]
> Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
1. Change default ensure_vertical_shell_thickness value back to ensure_all as suggested by @igiannakas
2. Change default sparse_infill_pattern vaule to ipCrossHatch
Size reductions
construct_1_xl_buildplate_model > 1073 from 2250KB
construct_1_buildplate_model > 599 from 608KB
Just joined parts and optimized planar surfaces. didn't changed borders
Also adding a feature for creating 3D bed models from SVG graphics will give a nice reduction on size. Constantly new printers added to profiles. it will be nice upgrade to reduce size of folder
