The mixed-colour metadata options are parallel per-slot arrays in the project
config. A project saved before they were sized per slot stores a single value
for the gradient ones, and one saved before they existed stores none. The GUI
sizes all seven to the filament count when it opens a project; the CLI kept
the stored arrays and exported one-element defaults for absent ones, so a
project it exported carried one-element arrays where the GUI writes one entry
per filament. Slicing is unaffected, every reader treats a missing entry as
not mixed / no gradient, but the GUI-vs-CLI comparison reported the four
gradient keys on every mixed-filament project.
The resize helper moves from PresetBundle.cpp, where it was file-local, to
PrintConfig.cpp next to set_filament_dev_options(). It creates an option the
config lacks before sizing it, a no-op for the bundle's project config where
all seven always exist. The CLI calls it with its filament count once the
project and loaded filaments are merged, after the check that every mixed
slot has a filament of its own.
The device drying options hold several values per filament, as many as
the filament preset gives, and a project stores them as the filaments'
values one after another. The CLI filament merge wrote them like an
option with one value per filament, putting each preset's first value at
the filament's own index, so a project with three filaments whose preset
gives "1", "0" was exported with 1;1;1;0;1;0 where the GUI writes
1;0;1;0;1;0.
The merge now leaves these options out of the per-filament pass and
rebuilds them afterwards from every filament's values in slot order.
Without a fixed number of values per filament one slot cannot be
replaced in place, so the stored values are kept when any slot has no
config to rebuild from.
The slicing frame of a belt object started at its lowest vertex, but the
belt under the leading end of an overhang lies below that, by the
overhang's length times the tilt's shear. Every support generator works
in layers at z >= 0, so none of them could reach it: normal supports
stopped at the object's own lowest layer, and the two tree generators
each carried a stack of hacks to extend themselves below it (a post-hoc
copy of the lowest base area in TreeSupport, "virtual belt raft layers"
in TreeSupport3D/TreeModelVolumes), sized from the pre-rotation bbox
and capped at global z = 0, which is only right for the trailing half
of the belt.
Start the frame at the lowest belt-floor point under the footprint
instead, less a 10 mm margin along the belt for the base of a support
column (BeltSliceStrategy::apply_preslice_transforms and
BeltTransformPipeline::compute_belt_height_and_floor agree on it). The
layers between it and the first vertex come out empty, which belt
slicing already tolerates, and the generators need no extension at all:
- normal supports: the generator anchors its layer grid at the frame
origin, so run it in the object frame and shift the global belt Z
offset onto the result afterwards, as organic supports already did.
With the offset on the object layers a top contact at negative z
turned the intermediate-layer count negative and the generator
allocated layers until the kernel killed it (any overhang in the
leading half of the belt). Drop the first-layer flange expansion on a
belt: the first support layer is the leading tip of the support, not
a flange, and inflating it put lines in the air ahead of the belt.
- classic tree: a node now keeps dropping until its whole circle is in
the belt, so the branch tapers to a tip on the belt instead of
stopping, a radius above it, when its centre crosses.
- organic: the belt is no longer a support blocker. A blocker is a
collision, and a branch descending onto one slides off it, down the
tilted belt and ahead of the part; the belt is where branches end,
which the per-layer m_belt_floor clipping already does.
The belt brim is generated after the parallel support step instead of
inside it: belt_brim_obstacles() reads every object's layers and support
layers, which another object's support step rebuilds (and, now, shifts)
at the same time. This is the race behind the Windows arm64 segfault
in "Belt brim of each object precedes its perimeters on its own
filament".
Also: the belt tilt axis moves to Developer mode as its own row (a
shared line is shown by its first option's mode), first_layer_plane
band thickness, belt_support_floor_mode, belt_preslice_global and
gcode_back_transform are retired and presumed on, the gravity arrow is
a plain line along the up direction, and the "Show raw G-code (belt
only)" preview toggle is gone.
Regression test: "Belt supports reach the belt under a leading
overhang" slices a cube with a fin whose underside is parallel to the
layers, 20 mm ahead of the cube and up to 41 mm of slicing Z above the
belt, for normal, organic and classic tree supports, and checks that
the lowest support layer sits on the belt beneath its own lines.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Removed, with the keys added to handle_legacy()'s ignore list so saved
profiles and 3MFs keep loading:
- belt_slice_rotation_global and preslice_remap_global. Both were only
consulted when belt_preslice_global ("Global mesh transforms") was off,
which no profile does; belt_preslice_global is now the single global
mode and is presumed on everywhere the old flags were ORed in
(PrintObjectSlice, BeltBackTransform, BeltGCode, Print::process,
PrintApply). The Belt tilt row is axis + angle only.
- preslice_remap_x/y/z. No profile used the pre-slice axis remap; the belt
tilt axis plus the G-code axis remap cover the machines that exist, and
its implementation only agreed with itself for a plain swap (matrix
columns vs remap_bbox rows). BeltTransformPipeline::build_preslice_remap,
remap_bbox and has_preslice_remap are gone, the forward transform is the
rotation, and the G-code header no longer carries the remap.
- belt_support_z_offset_mode. Saved and invalidated steps, but no support
generator read it.
- first_layer_plane and first_layer_plane_offset, with FirstLayerPlane.cpp.
On every shipped configuration the band is measured from the belt
surface (GCode::belt_height_above_floor) and the evaluator was only
reached for an explicit XY/YZ/XZ choice or a non-zero offset, which
nobody set. first_layer_plane_thickness stays as the band unit,
relabelled "First layer band thickness".
UI: the Machine frame transforms group is five single-option rows (G-code
remap X / Y / Z, Decouple machine-frame tilt, Machine-frame tilt angle;
the angle row is shown only when decoupled) instead of two multi-column
lines, and the remap fields carry full labels.
Also carries the phong.fs struct fix from #16226 so the worktree build
links its shaders.
libslic3r_tests and fff_print_tests pass; clang-tidy diff check clean;
orca_profile_tool.py check clean.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Brings belt-printer up to main 4b4a261787. Resolutions:
- G-code header (#15897, #15915): main moved the header, config and
thumbnail block later in _do_export; write_belt_header() moves with it,
still after the thumbnails and outside the BTT_TFT gate.
- _extrude: first-layer acceleration keeps the per-path first-layer plane
test with main's cached nozzle index (#16028); main's set_speed out-param
form (#16108) everywhere else.
- GCodeWriter (#16108): the arc-to-polyline fallback for machine mappings
that cannot express G2/G3 now runs in the out-param extrude_arc_to_xy,
which is the overload GCode calls, and appends to the caller's string.
- GCodeProcessorResult: the belt fields join main's forwarding assign.
- Clipper2 (#15969): belt arrange helpers take Slic3r::Point; the tree
support join types lose their ClipperLib qualifier.
- CLI arrange (#15837): belt printers still reserve no wipe tower.
- Wipe tower options (#15841): the two new sparse-layer toggles are hidden
for belt printers like the rest of the tower options.
- Keyboard shortcuts (#15706): main's registry replaces the old key switch;
the belt view toggle is re-registered in the next commit.
- Print::process: the belt purge-plan undo runs before main's SliceStarted
event.
- scripts/filament_id_snapshot.json: deleted on main (a77209af8f).
- Includes and appended tests: union of both sides.
perf: skip estimating curled walls when nothing reads them
The curled extrusion estimate ran whenever a region had overhang speed on,
which is the default, but only the slowdown for curled perimeters reads the
curled lines it produces, and that slowdown is off by default. The step now
also requires a region with the slowdown on, and clears the curled lines
when it skips the estimate, so none are left from an earlier slice.
Also fixes stale fan commands due to the stale curled lines on the reused layers.
* Add Missing Includes Across src/libslic3r
Every libslic3r source and header now directly includes the headers declaring what it uses, rather than relying on the precompiled header or transitive includes. Generated with clang-tidy misc-include-cleaner, with libslic3r headers spelled libslic3r/... so they resolve outside the library's private include paths. MultiMaterialSegmentation.hpp, Support/SupportParameters.hpp and Format/STEP.hpp are made self-contained by hand.
* Make the libslic3r Headers Compile on Their Own
Each now includes, or forward-declares, what it uses instead of relying on what its includers happened to include first. Left out: I18N.hpp, which errors on purpose when included from GUI code, and VoxelizeCSGMesh.hpp and SLA/bicubic.h, which nothing includes and which no longer compile at all.
* Add the Includes Missing From the Hand-Fixed libslic3r Headers
clang-tidy would not edit these headers while they failed to compile on their own, so the first pass skipped them. With the headers now self-contained, a second pass adds the rest.
* Keep Windows Setup Ahead of the Added libslic3r Includes
Print.cpp and Thread.cpp open with a _WIN32 block that has to come first; without the precompiled header, Print.cpp otherwise reaches windows.h through OCCT with NONLS defined and boost/regex fails. OpenVDBUtils.cpp and SLA/SupportTreeBuilder.cpp had includes inside #ifndef NOMINMAX, which libslic3r defines on Windows, so those were skipped there. .clang-tidy also ignores the MSVC STL and UCRT internals, Boost.Multiprecision's fwd.hpp and CPython's Windows include directory.
* Re-Add libslic3r Includes After the Clipper2 2.0.1 Migration
Rebasing onto main took main's version of the files the Clipper2 migration rewrote, so their added includes are restored here, along with includes for main's new code. Clipper2's individual headers are now ignored by clang-tidy: they only build the Z variant through clipper2_z.hpp, which defines USINGZ first, so including clipper.core.h and the like directly broke ClipperZUtils.cpp.
Five commits: a section view for the 3D canvas, a faster G-code preview, user
preset values kept on extruder variants they don't list, debug build CMake
fixes, and a 30 minute timeout on macOS notarization.
Two conflicts, both in GLCanvas3D. The header's were neighboring
declarations, kept from both sides. In the transparent pass, the section view
removed the assemble view's painter block that followed our ghost render;
the ghost render stays where it was, at the end of that pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keep User Preset Values on Extruder Variants They Don't List
A user preset stores the variant list its parent had when it was saved.
When the parent later gains variants, update_diff_values_to_child_config
matched variants by name only and left the new ones at the parent's
value, so the user's settings were silently replaced there, and a
re-save wrote the system values into the user's file.
An unmatched parent variant now takes the child's first variant of the
same extruder, the rule slicing already uses in get_config_index_base.
A child without a variant list covers the parent's first extruder. The
name match also no longer indexes the child's extruder ids when it has
none.
* Share One Variant Column Rule Between Slicing, User Presets and Projects
Three places chose which variant column a value comes from, each with
its own copy of "the same variant and owner, else the owner's first
column": get_config_index_base when slicing, the user preset merge in
update_diff_values_to_child_config, and normalize_filament_values_to_variants
for projects and the CLI.
find_variant_column now holds that rule and map_variant_columns applies
it to a variant list, so a change to how missing variants are filled
reaches all three. Each caller keeps its own copy step. There is no
behaviour change: G-code is identical before and after. The one
relaxation is that get_config_index_base no longer reads past a short
id list when its two lists differ in length, which its assert already
rules out.
* Rename variant column helpers to variant index
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
138 commits. The count is large because texture displacement merged with its
whole branch history behind it, going back to July, alongside config and preset
file locking across instances, a foundation for configurable printer agent
connections, and a day of smaller fixes and CI work.
Two conflicts, both the same shape: each side had appended to a sorted list and
git could not choose an order. libslic3r's CMakeLists gained InstanceLock
alongside our IMEXHelpers and IMEXZones, and the preset bundle loading test
gained an include for ParallelResolve alongside ours for IMEXHelpers. Both sides
kept, alphabetical. No logic conflicted.
Verified: 740 targets build clean under -Werror, and the Release suite passes
1740 of 1740, up from 1665 -- the 75 new cases arrived with the merge and all
pass. That mattered more than usual here, since preset loading and config
locking are both areas the IMEX preset code touches.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
An ironing line spacing of 0 reached the fillers from a 3MF, the CLI or
the per-filament override, which has no GUI guard. Concentric ironing
then never finished slicing, because a zero inset never shrinks the
region, and rectilinear ironing was silently dropped. Tiny positive
values produced an unprintable number of lines.
Top surface and support ironing now clamp the spacing to the 0.05 mm
floor the process GUI guard already enforces, so these configurations
iron at that spacing. Spacings at or above the floor, including every
shipped profile, are unchanged. The concentric filler also returns early
on a non-positive step so no other caller can hang it, and the filament
settings page now resets a too-small override the same way the process
page does.
Eleven commits, including a typed-config G-code export speedup, a printer agent
refactor that generalizes the infrastructure beyond Bambu, gyroid optimization,
and three CLI crash fixes.
One conflict, in PrintConfig.cpp. Upstream introduced a new_def macro and began
migrating the placeholder table onto it, adding curr_bed_type that way in the
same block where this branch had added imex_mode, imex_mode_index and
imex_mode_gcode in the older def = this->add(...) form. Both sides are kept and
ours are converted to the macro, which expands to the same three statements and
wraps label and tooltip in L() exactly as before, so nothing changes about what
is registered or what is translatable.
Note for anyone building this branch: the agent refactor adds a dependency,
LibDataChannel, so the deps tree needs dep_DataChannel built before the app will
configure. A distribution package of the same name will be found first if one is
installed, and the resulting error names a missing RelWithDebInfo location
rather than the wrong package, so point LibDataChannel_DIR at the dependency
prefix if that happens.
Verified: 789 targets build clean under -Werror, and the Release suite passes
1665 of 1665, up from 1630 before the merge -- the 35 new cases arrived with it
and all pass.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Upstream moved pressure advance onto the extruder variant: enable_pressure_advance,
pressure_advance and the four adaptive keys joined filament_options_with_variant,
the repeated inline blocks in set_extruder() became a helper, and the lookups
moved from the filament id to get_filament_config_index().
All three conflicts were the same collision, because this branch had modified two
of those same inline blocks to pass a tool qualifier so each carriage is addressed
explicitly in parallel modes. Taking either side whole would have lost something:
upstream's drops the qualifier and leaves parallel carriages with no pressure
advance, ours drops the per-variant indexing and reads the wrong column on a
multi-variant printer. The helper now takes an optional tool, defaulting to -1,
which omits the qualifier. imex_pem_tool_for() already returns -1 off IMEX and in
primary mode, so non-IMEX output is unchanged, and the three call sites that never
passed a tool keep upstream's behavior exactly.
The third conflict was two test cases appended at the same place. Both are kept.
Separately, one defect that merged cleanly and so was not flagged: the loop that
emits pressure advance for secondary carriages at the start of a print still
bounded and indexed those vectors with a raw filament id. They are variant
expanded now, so their length is columns rather than filament slots -- the value
read was the wrong column, and the bound no longer sat in slot space, letting an
out-of-slot filament through. It now bounds on filament_diameter and translates
with get_filament_config_index(), which is what the sibling second-layer
temperature loop already does.
Verified: both changed translation units compile clean under -Werror. The merge
was resolved independently twice and the two resolutions agree on every line of
code. Not yet run: the Release test suite and a parallel-mode slice sweep.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The two conflicts are both places where upstream landed on top of IDEX/IQEX
code. In GCode.cpp the relocated file header block meets the IMEX placeholder
block, and the placeholders are set first: file_start_gcode is processed through
the placeholder parser now, which throws on a name it does not know, so a script
naming {imex_mode} would abort the export if the header ran first. In
test_multifilament.cpp both sides appended a case at the end of the file.
A coEnum config value has two representations: the typed ConfigOptionEnum<T> a
config cloned from the static classes carries, and the ConfigOptionEnumGeneric
that a config assembled from the option definitions creates - which is what a
preset, a project's own settings and the CLI all hold. imex_cfg_enum() accepted
only the first, so every IDEX/IQEX reader took the option default instead: a
printer saved as rear-left came back front-left in the settings, the bed zones
and the carriage markers, while the preset on disk still held rear-left.
Read the generic form too, keyed on the value map it carries, since only T's own
map yields a T. The last reader that matched on the coEnum tag alone and cast
across the two hierarchies now goes through the helper with everything else.
Declaring the three keys the static classes were missing is what lets a change
to imex_tool_layout invalidate the slice it moves, which it never did before.
The two that are only ever drawn stay out of that: a colour scheme and the
advisory margin bands do not reach a slice, so changing one must not discard it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Add Ultimaker S5 Profile - WIP
* Add Ultimaker physical printer base
* Ultimaker API WIP for base update.
* Fix undefined reference error.
* Add UMS5 profile, add placeholders for testAuth stuff.
* Fix non-const func definitions, make func names align with style guide.
* Localization stuff? IDK if this does anything or is required.
* Add cover image
* Auth code cleanup, add UI button for auth cred generation, implement various auth checks and tests.
* Fix auth stuff
* Clean up code
* Get upload code sort-of working, fix typo
* Update printer settings and start/end gcodes
* Add makeGriffinCompatible preprocessor script to prevent machine crash, update machine profile.
* Fix buildplate size, fix time missing bug, add S5 buildplate model
* Correct capitalization to UltiMaker
* Fix display bug, fix capitalization bug
* Implement credential generation button and logic
* Fix generate auth creds button, add todos, fix capitalization.
* Actually fix generate auth credentials.
* Fix generate auth creds message.
* Update UM S5 machine limits
* Revert accidental commit.
* Fix postprocessor, clean up code.
* Update presets for multi-extruder printing.
* Add Single Extruder and Fast profiles.
* Code cleanup
* Register and validate the UltiMaker S5 presets
* Show the Generate API Key button only for UltiMaker print hosts
The PR added it to the Physical Printer dialog for every host type, where pressing it runs an ordinary connection test and reports "API Key created". Gate it on the selected host type instead.
* Drop unused lambda captures in the UltiMaker host code
clang promotes -Wunused-lambda-capture to an error under the project's -Werror, so the file failed to build on macOS; the five callbacks do not touch this.
* Fix the Windows build of the UltiMaker print host
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Four files overlapped, and each resolution favours upstream where the two sides
had done the same work:
WipeTower's M104/M109 tool qualifier. Both sides bounds-checked the physical
extruder map lookup; upstream omits the T qualifier when the map cannot answer,
where this branch fell back to the logical index and so named a carriage that may
not be the one printing. Upstream's behaviour is what this branch documents
elsewhere, so its version is taken and the local helper is dropped.
get_extruders' mixed-slot switch. Upstream added the same concept to the CLI
overload as expand_mixed_slots, so the GUI overloads' parameter is renamed to
match rather than carrying two names for one idea.
GLCanvas3D's sequential-clearance branch gains upstream's
update_compacted_wipe_tower_clearance for the by-layer case.
The printer_agent re-sync in TabPrinter::reload_config was upstream's and their
preset-undo fix removed it, so it goes; the IMEX modes grid re-sync beside it
stays, since it spans three options and is not a Field.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Toolchange Cyclic Order
* Apply cyclic order to first layer
* Unit test
* Copilot fixes
---------
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
Merge origin/main (00429da739) into belt-printer.
Conflicts resolved:
- src/CMakeLists.txt: keep both wxInspector workarounds.
- GCodeProcessor.cpp: keep the belt compare_pos / z_for_height lines.
- PrintObjectSlice.cpp: the belt bbox-Z guard also covers main's
printable_region_ids bookkeeping.
- TreeSupport.cpp: the belt-floor check runs before main's PendingNode
queueing.
- Tab.hpp: keep the belt fields, drop the removed upload description
fields.
- tests/libslic3r/CMakeLists.txt: keep both test files.
Also included:
- eSUN PLA belt presets declare their own filament_id (OFkrxQC4) and
scripts/filament_id_snapshot.json is regenerated, as main's filament_id
check requires.
- Custom.json version bumped to 02.04.00.05 so the belt entries reach
existing installs.
- Fix the ambiguous WithinRel call in the belt apron width test, which
otherwise breaks the fff_print build.
