main's profile checks reject the belt bundles: their filaments override
variant keys with one value under the library's six-variant presets, the
copied vendor commons carry keys the slicer no longer reads, the IR3 V2
and BabyBelt Pro machine limits miss the silent-mode entry, and the Custom
belt base pins printer_extruder_id to one entry under a three-variant list.
- The BabyBelt Pro and IR3 V2 filaments name the one extruder variant
their printers have, as the other vendors' filaments built on the
library do, and drop every override that only repeats the library value
(diameter, density, temperature range, most of the fan settings...).
The eSUN filaments inherit the narrowed list.
- The Custom belt base inherits printer_extruder_id from its base.
- normalize drops silent_mode, adaptive_layer_height and
tree_support_with_infill; fix-variant gives the machine limits their
silent-mode entry, which they read from the single value before.
- The IR3 V2 drops two limits equal to its base in both modes.
- Custom's index is regenerated and all three vendor versions bumped.
Flattening every belt preset before and after, nothing a belt printer
reads changes: printer_extruder_id is one id per variant, all 1.
Printcepts and IdeaFormer keep their own machine and process bases: only
filaments can inherit across vendor bundles (from OrcaFilamentLibrary), so
they cannot build on the Custom belt printer.
On a belt printer a lift is a move along the belt axis (0.4 mm / sin 45 =
0.57 mm of belt travel out and back on every hop), not a lift away from the
part. The three belt printer bases now ship z_hop 0, the IR3 V2 leaf no
longer restates 0.4, and the BabyBelt Pro and IR3 V2 filaments stop
overriding the printer with filament_z_hop 0.4. The option stays editable.
The belt-printer branch is failing two profile gates. Both stem from the
three belt-only vendors (Custom's generic belt printer, IdeaFormer,
Printcepts) not existing upstream, so upstream maintenance passed them by.
Slice check: 4 of 1015 printers failed - Custom's MyBeltPrinter 0.2/0.4/
0.6/0.8 nozzle all fell back to "Default Setting". No process profile in
the Custom vendor listed any MyBeltPrinter in compatible_printers, and
Custom's fdm_belt_common pointed default_print_profile at
"0.20mm Standard @System", which does not exist in that vendor's index,
so the generic belt printer had no usable process at all. This gap dates
to when MyBeltPrinter was added (2026-04-07); it only started failing now
because the slice-check job is newer than that.
Adds two process profiles modelled on the sibling @MyKlipper ones:
- 0.20mm Standard @MyBeltPrinter - 0.4/0.6/0.8 nozzles
- 0.12mm Fine @MyBeltPrinter - 0.2/0.4 nozzles
The split is forced by hardware: the 0.2 nozzle preset caps
max_layer_height at 0.16, so a single 0.20mm profile cannot legally cover
it. fdm_belt_common now defaults to the standard profile and the 0.2
nozzle preset overrides to the fine one.
setting_id: 14 files failed the rules introduced in #14432. That
migration renumbered 7425 files across 61 vendors but skipped these three,
leaving BabyBelt Pro, IdeaFormer IR3 V2 and MyBeltPrinter squatting the
"G*" id space reserved for Bambu (GMPC0BBP01, GMIF001, GM_BELT_00x) and
four instantiated filament/process presets carrying no setting_id at all.
Regenerated with scripts/assign_vendor_setting_ids.py.
Also repoints the identical dangling "0.20mm Standard @System" in
Printcepts' and IdeaFormer's fdm_belt_common at their own real process
profiles. That is a no-op today because both concrete printers override
it, but it is the same landmine that took out MyBeltPrinter.
Vendor index versions bumped so check_installed_vendor_profiles() will
re-install the corrected profiles over an existing install.
Note: changing a shipped preset's setting_id can orphan user presets that
reference it as base_id. #14432 accepted that tradeoff for 61 vendors;
this keeps these three consistent with the rest.
Verified: orca_extra_profile_check.py reports 0 errors across 66 vendors
(was 14 files with errors), and OrcaSlicer_profile_validator -s slices all
1015 printer presets successfully (was 4 failures).
harrierpigeon