* Fix data race in extra bridge layer generation causing spurious bridges on top surfaces
* Guard second bridge layer against top most surfaces
* CoPilot review comments & lighting infill threading fix.
Fix adaptive fill issues
- Disconnecting from walls at low density
- Not supporting rotation
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
* Introduce option to control number of skirt walls after first layer
* Merge branch 'main' into Introduce-option-to-control-number-of-walls-on-skirt-after-first-layer
* Merge branch 'main' into Introduce-option-to-control-number-of-walls-on-skirt-after-first-layer
* One wall draft shield options refactor
* Merge remote-tracking branch 'upstream/main' into Introduce-option-to-control-number-of-walls-on-skirt-after-first-layer
* Merge branch 'main' into Introduce-option-to-control-number-of-walls-on-skirt-after-first-layer
* Renamed to single loop draft shield
* Merge branch 'main' into Introduce-option-to-control-number-of-walls-on-skirt-after-first-layer
* Merge branch 'main' into Introduce-option-to-control-number-of-walls-on-skirt-after-first-layer
* Check for air filtration support on the printer level before emitting air filtration gcode command
* Merge branch 'main' into Check-air-filtration-support-at-the-printer-level-too
* Removed expand factor from IOI as it was incorrectly causing perimeter failing to observe IOI reordering.
* Merge branch 'main' into Bug-Fix-IOI-re-ordering-failing-to-reorder-in-certain-edge-cases
* Additional control over bridges
* Label updates
* Detect and handle layers over external bridges
* Label updates
* To-Do placeholders
* Filter out small external bridges
* Apply safety offset for internal bridge polygon intersections
* code comments
* Increase bridge offsets to 3 perimeters total (1.5 perimeter in each dimension)
* Filter out bridges based on perimeter counts to focus bridge on areas where bridge infill is actually generated in the end.
* Fixing bugs
* Convert tick boxes to drop down menu
* Additional geometry checks for second internal bridge to ensure no small polygons are left over.
* Minor code refactor for clarity
* Further refinements in polygon logic
* Polygon logic refinements pt3
* Further union operations to ensure clean geometry
* Fix compile error
* Clean up constructors
* Only create bridges on stInternalSolid areas, not sparse infill.
* Refactor internal second bridge logic to stand alone parallel for loop to avoid thread deadlocks
* Revert change to only consider stInternalSolid areas for second internal bridge layer.
This resulted in partly unsupported solid infill areas above as the remainder was too narrow to generate sparse infill
* Updated beta statements and tooltip changes
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Enhancement: ERS segment length - convert to float
To allow splitting of line segments down to 0.5mm for improved external surface finish.
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Option to limit ERS to external perimeters and overhangs only
* Label name
* Label update
* Merge branch 'main' into Limit-ERS-to-external-perimeters-and-overhangs
* Merge branch 'main' into Limit-ERS-to-external-perimeters-and-overhangs
* Merge branch 'SoftFever:main' into Limit-ERS-to-external-perimeters-and-overhangs
* Merge branch 'SoftFever:main' into Limit-ERS-to-external-perimeters-and-overhangs
* Merge branch 'main' into Limit-ERS-to-external-perimeters-and-overhangs
* Merge branch 'SoftFever:main' into Limit-ERS-to-external-perimeters-and-overhangs
* Merge branch 'main' into Limit-ERS-to-external-perimeters-and-overhangs
* Merge branch 'SoftFever:main' into Limit-ERS-to-external-perimeters-and-overhangs
* Merge branch 'main' into Limit-ERS-to-external-perimeters-and-overhangs
* Ported filament shrinkage compensation from Prusa Slicer. Updated logic to be 100 = no shrinkage to be consistent with orca definitions
* Code comments update
* Merge branch 'main' into Filament-Shrinkage-compension---port-from-Prusa-slicer
* Merge remote-tracking branch 'upstream/main' into Filament-Shrinkage-compension---port-from-Prusa-slicer
* Merge branch 'main' into Filament-Shrinkage-compension---port-from-Prusa-slicer
* Wiki home page fix links and readme update to link to wiki
* Update README.md
* Fixed developer reference links
* Update linkage from slicer settings to Wiki for layer height, line width and seam settings
* adaptive PA documentation
* Update adaptive-pressure-advance.md
* updated screenshots
* formatting
* Update adaptive-pressure-advance.md
* Update adaptive-pressure-advance.md
* Update adaptive-pressure-advance.md
* Include adaptive PA link
* Improvements in Inner Outer Inner wall ordering logic
* Updated to BFS algorithm, made ordering more robust and corrected edge cases
* Doc updates
* Refinements in perimeter sorting
* Removal of touch threshold and code debugging to improve sequencing
* Code cleanup
* Code refinements on perimeter distance thresholds
* Extend perimeter re-ordering to more than inset index 2, to reduce travel moves when printing neighbouring features
* Refinements to IOI perimeter re-ordering algorithm to improve travel scenarios where multiple external perimeters are contained in the same island.
* Documentation updates
* Removed unnecessary code
* Removed bespoke to_points function and replaced with ExtrusionLine member already present. Removed squaredDistance and replaced with Eigen library call.
* Refactor code to move distancing functions to the multipoint class. Renamed for more clarity on their purpose.
* Fix z hop performed after retraction in PA pattern calibration. Fix zhop config value not used
* Updated gathering of z hop value method for consistency
* Increase granularity of extrusion move splitting for small line segments ending in an overhang
* Parameter tweak
* Increase granularity of estimation for curled perimeters
* Adjust parameters following experimentation with overhang prints
* Updated overhang segmentation logic
* Cleanup code comments
* Adaptive Pressure advance options setup
* Dynamic PA - PCHIP interpolator code and tests
* Integrate dynamic PA with slicing code - emit new PA values per speed change
* Link adaptive PA to role change instead of speed change
* Adaptive PA - Alpha 2
Reduce the frequency of requested PA changes by introducing a "state" variable.
Implement user toggle for adapting PA for external walls for overhangs
* Hide adaptive PA for overhangs
* Convert Adaptive PA to use volumetric flow model and start preparing for converting to Gcode post processor
* Converted Dynamic PA to a post processing filter. Reverted changes in GCode cpp and created tagging mechanism to allow filter to apply PA changes.
* Removed adaptive PA for overhangs
* Foundations for two dimensional adaptive PA based on acceleration and volumetric flow speed
* Minor code cleanup and updating of tooltips
* Renaming files for better clarity and generate classes documentation
* Update src/libslic3r/PrintConfig.cpp
Co-authored-by: ElectricalBoy <15651807+ElectricalBoy@users.noreply.github.com>
* Update src/libslic3r/PrintConfig.cpp
Co-authored-by: ElectricalBoy <15651807+ElectricalBoy@users.noreply.github.com>
* Update src/libslic3r/PrintConfig.cpp
Co-authored-by: ElectricalBoy <15651807+ElectricalBoy@users.noreply.github.com>
* Introduce average mm3_mm over the length of a multipath for adaptive PA
* Updates for multipath handling part 2
* Introduce average mm3_mm over the length of a multipath for adaptive PA
* Trigger PA evaluation more frequently to catch edge cases where speed changes across islands of the same feature type.
* Updates for multipath handling part 2
* Adaptive PA: Implement average flow estimation on loops
* Code formatting
* Fix adaptive PA not adapting for small disconnected external wall line segments.
* Updated to take max print speed of upcoming feature to calculate new PA value.
This is to resolve issue of incorrect PA value used when starting a new feature at an overhang.
* Code clean up
* Performance tuning
* Further performance tuning by reducing use of regex commands in the nested loops and fix bug preventing gcode line output
* Further performance tuning and tweaks to stop searching for max speed after the first travel move.
* Reduce debug information
* Updated debug info
* Fix an issue on seams on specific models when wipe before external perimeter was enabled. Also cleanup documentation and add new to-do's
* Prepare for adaptive PA for overhangs, fix wipe bug & clean up code and comments
* Initial commit for adapting PA when extruding fully overhanging perimeters
* Ignore wipe command when identifying current print speed
* Option to evaluate adaptive PA on overhang regions in preparation for Klipper experimental option testing
* Update to issue PA changes for varying flow conditions within the same feature
* Fix bug where adaptive PA was enabled erroneously for role changes and ignoring user's preference.
* Refactored some code
* More refactoring
* Some bug fixes and enabled comments only when verbose g-code is enabled
* Introduced dedicated PA option for bridges
* Code refactoring to optimise initialisation of PA processor (making it faster). Fix a bug where PA was not always set after a toolchange. Improve general error handling and robustness.
* Updates to adaptive PA tooltips
* Bridging PA check with Epsilon instead of 0.
* Adaptive PA: addressing comments
---------
Co-authored-by: ElectricalBoy <15651807+ElectricalBoy@users.noreply.github.com>
* POC - Do not slow down external perimeters to meet minimum layer time
* POC - Do not slow down external perimeters to meet minimum layer time - rework
* Revert "POC - Do not slow down external perimeters to meet minimum layer time"
This reverts commit d84ff93f90.
* Dont slow down external perimeters to meet layer time target v2
* Reverted previous implementation
* UI fixes for dont slow down for layer cooling
* Update dont slow down outer walls naming convention
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Potential fix for other layers bed temperature not applied
* Merge branch 'main' into Potential-fix-for-other-layers-bed-temperature-not-applied
* Merge branch 'main' into Potential-fix-for-other-layers-bed-temperature-not-applied
* ENH: Enabled gap fill algorithm for all solid fill types
* Made gap fill an option & refactored code into its own method
* Code comment updates
* Converted gap fill to enum and control filter out gap fill in the UI
* Update label for consistency
* Spelling mistake
* #3603 - fix "Wipe before external loop" causing blobs on single wall perimeters
* Updated parameters to pass by const reference to avoid re-creation of object
* ENH: Improve internal bridge detection for sloped surfaces
* Moved lightning detection out of the parallel threads
* Naming conventions
* Revised approach - use reduced expansion multipliers
* Further reduce filtering, flagged option as experimental
* Corrected code comment
* Updated tool tip
* Introduced filtering drop down option
* Attempt to fix retraction issues with PA pattern calibration
* PA pattern test fix - retract and wipe on layer change
* Naming convention
* fix crash
* PR: Fix crash when printing by object after 1.8.2 code merge
* PR: Revert change in tool ordering - reorder_extruders_for_minimum_flush_volume to enable tool sequencing based on projected flush volumes
* Bumping up reordering to up to 12 different colors on same layer.
* Updated tool ordering to distinguish between bbl printers when reordering tools
* Update to code comment
* Updated population handling of is_bbl_printer variable
* Wipe retraction adjusted based on available wipe distance and retraction speed
* Wipe Improvements: Removed debug code, removed retract before wipe and made the respect retract speed an option.
* Wipe improvements: Spelling & grammar
* Revert "Wipe improvements: Spelling & grammar"
This reverts commit c8f8612b3f.
* Revert "Wipe Improvements: Removed debug code, removed retract before wipe and made the respect retract speed an option."
This reverts commit ba515ffb62.
* Wipe improvements: Using retraction before wipe parameter to judge when to do excess retraction
* Wipe Improvements: Floating point comparison check
* Wipe Improvements: Refactoring the code
* Wipe Improvements: Updated Wipe Distance tool tip
* Wipe Improvements: Removed redundant code
* Wipe Improvements: Use unscale_
* FIX: mistake in filament vendor
jira:[NEW]
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3af712e417379d8b98ae18feebffe465bfa1e72d
* NEW:set customized materials for the A1 P1 series
Change-Id: I9c34f62867c074bf9ebb315013e5e40526e0eac7
* FIX: the flow rate ratio crashes after load model
for third party printer
Jira: 5244
Change-Id: Idd829c9d99eeba9d180653ac8de4e51b9a0d6370
* FIX: The maximum value is not printed in PA line mode
Jira: 5046 4951
Change-Id: Ic81f9a75ce7f088fe950fdde283ff5c942cd6e83
* ENH:add preset check for sending files
Change-Id: Ia3313d281b5ce91e277b380498014ffdac5debd3
* FIX: locale loading user preset
Change-Id: I88521e4b10cb802d9253eb79a6b78b3286f15a33
Jira: STUDIO-5436
* FIX: sync user preset notify crash on exit
Change-Id: I88f5dbcbd487293ea847ea6092efb61744399541
Jira: STUDIO-5413
* ci: update build version to 01.08.01.56
Change-Id: Id7a9718d5f920da50d52fd2ef220acf5d3270d3c
* GUI/Field: Fix crash in color picker init (#2220)
wxButton->GetBitmap() may return an invalid wxBitmap.
Guard against this.
* FIX: custom filament preset display in cali history issue
jira: new
Change-Id: I4145450a231adff542ab1a7428b3479f4074e06a
* FIX: meshboolean transform result issue
jira: STUDIO-5425
Change-Id: If66fe909ce4458c1b3192e4fd8a3d758fe7c7eaa
* FIX: fix combobox and delete btn in filament setting enabled
Jira: XXXX
Change-Id: I8b659bd77ceb97c8cea9d3e5e931f4ea50822721
* ci: update build version to 01.08.01.57
Change-Id: I7a6f5439863ca81275ae8b80f1b5cf0bb36c4c0f
* Fix crashing of flow rate calibration post BS 1.8 merge
* Revert Staggered Inner Seam logic from Prusa slicer that was overwritten by the BS1.8 update
---------
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Co-authored-by: xun.zhang <xun.zhang@bambulab.com>
Co-authored-by: hu.wang <hu.wang@bambulab.com>
Co-authored-by: zhimin.zeng <zhimin.zeng@bambulab.com>
Co-authored-by: tao wang <tao.wang@bambulab.com>
Co-authored-by: chunmao.guo <chunmao.guo@bambulab.com>
Co-authored-by: gerrit <gerrit@bambulab.com>
Co-authored-by: mia <652892+mia-0@users.noreply.github.com>
Co-authored-by: liz.li <liz.li@bambulab.com>
Co-authored-by: maosheng.wei <maosheng.wei@bambulab.com>
* Dev 1.9 - Regroup Advanced Quality Options
* Regroup Advanced Quality Options
* Regroup advanced quality options and flow rate labels
* Updates labels for consistency. Renamed Order of walls to Walls printing order. Updated walls printing order and print infill first tooltip
* Another option spelling mistake
* Another spelling mistake part 2
* Updated localisation files
* Updated de localisation file post upstream merge to resolve conflicts
* Fix merge error when transferring change to branch.
* update locale file for one more message
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Ioannis Giannakas