Closes review comment 1.
imex_parallel_mode and imex_head_filament_map were streamed raw into XML attribute
values, while every other free-text attribute in the same writer goes through
xml_escape. Mode names are free text, so "PLA & ABS", a quote or a "<" made the
document malformed. The failure is not a bad value on reload: both load paths for
model_settings.config return false on an expat error, and m_is_bbl_3mf is set
before the second entry loop runs, so the whole project fails to open with
"Archive does not contain a valid model config".
Both attributes now use xml_escape_double_quotes_attribute_value(), which also
emits tab, CR and LF as numeric character references. That matters and plain
xml_escape would not do: XML normalises literal whitespace in attribute values on
read, so a tab in a mode name would come back as a space and silently rename the
mode. The read side needs no change -- it takes expat's already-decoded value with
no second unescape -- so this is a lossless round trip and a file written by the
new code still loads in an older build.
The round-trip test used "copy_mode", which exercised none of this; it now carries
&, <, a quote and a tab, and also pins that ' and > come back unmodified, since
both are legal raw inside a double-quoted value.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Validate mixed-filament definitions during the published material pass: definitions whose components reference slots that do not exist or hold other mixed filaments, or that carry fewer than two components, are reported through the shared skipped_keys channel instead of shipping a mix the GUI integrity check would only flag later.
Fix the slot-limit exhaustion report being silently dropped: it wrote to published_config->skipped_keys, which the pass's final move-assignment from the local vector clobbers. All rejections now go through the local.
Remove the unreachable persist branch from add_detached_preset: no caller passes save_to_project=false, so the parameter is gone and the copy is always project-embedded.
Tests: cover the exhaustion path, the new definition validation, the identity-tier matching matrix (including substitute reporting), the structural-key denylist, whole-vector size-mismatch skips, relocation payload degradation, the "(Published 2)" uniquify chain, mixed blend colours staying out of shared preset configs, and duplicate-slot last-wins. Also fix the legacy-3mf scenario passing vacuously behind an if-guarded assertion. All existing published/3mf tests pass unchanged.
- Publish mixed-filament slots as whole units: serialize the filament_mixed_* definition into project_config on import, grow the receiver's parallel arrays in lockstep, and report unappliable definitions as skipped instead of dropping them silently
- Per-extruder printer selection: one inner tab per extruder, rows keyed by full "#N" ids; single-extruder receivers collapse variants onto their slot (first applied, rest skipped), multi-extruder receivers override element-wise
- New per-slot "Enable" toggle gating what gets published; enabling a mix auto-enables + Full Publishes its components
- Mixed page previews: fixed-size ratio bar, ternary triangle (3 components) and Material Ratio vs Model Height graph (gradients), always visible regardless of Enable
- Tab strip shows full swatch compositions with adjustable spacing; barycentric helpers shared via FilamentBitmapUtils
Brings in 54 upstream commits, the bulk of them the BambuStudio-ported color
mixing / mixed filament subsystem (#15347) plus its follow-ups, along with the
Assimp-backed colored OBJ import, warning-policy build changes, and assorted
profile and localization updates.
Two conflicts, both "each side added at the same point", resolved by keeping
both:
- Print::validate() -- our IMEX multi-color block and upstream's new gradient
mixed filament warning were inserted at the same spot after the empty
extruders check. They test unrelated conditions, so both are kept, each with
its own closing brace.
- tests/libslic3r/test_3mf.cpp -- our three IMEX per-plate round-trip scenarios
and upstream's mixed-filament round-trip scenario both append to the end of
the file, and each side added one include. All four scenarios and both
includes are kept.
Everything else merged cleanly, including GCode.cpp, ToolOrdering.cpp,
PartPlate.cpp and PrintConfig.cpp. Upstream left the is_extruder_used block
untouched, so the IMEX supplement still applies, and estimate_wipe_tower_polygon
is unchanged, so the prime tower hull work is unaffected.
Not addressed here, and worth its own change: a mixed filament is a virtual slot
that no nozzle carries, while physical_extruder_map routes logical slots to
physical heads. Print::extruders() lists mixed slots under their own id whereas
tool_ordering.all_extruders() lists them post-expansion, so the IMEX pem lookups
have no defined answer for a mixed slot. Upstream's own guards reject a mixed
filament where a physical slot is required; IMEX likely wants the same.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Per material slot, the Publish dialog can now embed the entire filament preset ("Full Publish") and require a curated filament type and/or colour:
- On export, full-publish vector options are masked to the author's slot so unrelated slot data never leaks into the published file.
- On load, slots are matched by the published type: a match keeps the receiver's material (full dumps ignored, partial keys applied); a mismatch replaces the slot with the first visible same-type library filament, falling back to a temporary embedded preset or skipped keys when none exists. Required colours apply regardless of the type match.
- The receiver's slot count grows only to the highest published slot.
- Published 3MFs load as a new project: the file's path is not adopted as the project filename, published metadata is stripped from the model, and the file is added to recent projects.
- Notifications list replaced slots, and the edited filament preset is refreshed so applied values surface in the GUI.
- Dialog: "Full Publish" toggle replaces the material opt-in and select-all headers; new Color/Type requirement rows with swatches.
- Add Ctrl+Shift+E shortcut for the Publish dialog (menu, key handling, and the keyboard shortcuts dialog).
- Tests for export slot masking, metadata round-trip, replacement semantics, slot growth, and skipped-key reporting.
Follow-up to #14785. Routes the tests that still hand-rolled temp paths through
the shared helpers and unifies the temp guards.
- Add ScopedTemporaryDir and a shared ScopedTemporaryPath base under it and
ScopedTemporaryFile.
- Move test_3mf's round-trip .3mf output out of the TEST_DATA_DIR source tree
(a fixed-name leak) and test_toolordering's fixed-name temp .gcode (a sharding
collision) onto ScopedTemporaryFile.
- Move test_config, test_slicing_pipeline_bindings, the test_3mf backup dirs, and
test_preset_bundle_loading onto the guards.
- Make slic3rutils ScopedDataDir compose ScopedTemporaryDir; dedupe
test_network_versions' fixture and delete test_plugin_lifecycle's duplicate.
test(libslic3r): replace the disabled convex_hull_2d test, closing #11269
The last "failing libslic3r test" from #11269 was the disabled
SCENARIO("2D convex hull of sinking object", "[3mf][.]") in test_3mf.cpp.
It checked ModelObject::convex_hull_2d for a sinking object against
PrusaSlicer's reference hull, but Orca's convex_hull_2d does not clip
geometry below the bed the way PrusaSlicer's its_convex_hull_2d_above does,
so the reference never matched. The test also wrote a debug mesh to a
hardcoded /tmp path and its comparison loop was inverted.
Remove it and add tests/libslic3r/test_model.cpp characterizing
convex_hull_2d on non-sinking transforms (identity and scale+offset),
where the projected footprint is unambiguous. Homed in a Model test file
since it exercises ModelObject, not 3MF.
Conflicts were all co-located additions rather than design collisions:
- GCode.cpp: adopt upstream's toolchange(filament_id, nozzle_id) signature and
per-variant set_config_index() while keeping the IMEX bare-T<n> suppression;
rebase the second-layer temperature loop's non-IMEX branch onto upstream's
get_filament_config_index() resolution.
- Preset.cpp / PresetBundle.cpp / PrintConfig.cpp: keep both sides' option-list
and enum-map entries.
- GLCanvas3D.cpp: upstream's printable_heights argument plus the IMEX ghost pass.
- PartPlate.cpp: keep <set> (still used).
- test_gcodewriter.cpp / test_3mf.cpp: keep both sides' test cases.
Brings in the IMEX test coverage (PA per-firmware, Temperature per-firmware,
[Variant] expansion, 3MF round-trip, imex_pem_tool_for helper + tests, and
the cherry-picked variant-truncation regression test).
Resolution notes:
- Two GCode.cpp call sites for set_pressure_advance had divergent edits:
* tests/imex-coverage rewrote them to use the new imex_pem_tool_for
helper (commit c2492ccc47), eliminating the inline parallel-mode
check entirely.
* feedback replaced the literal "primary" with kImexPrimaryMode in the
same lines (commit 085f5ccec8).
Resolution: keep the helper-call form. The kImex change is moot on lines
the helper replaces, and imex_pem_tool_for in IMEXHelpers.cpp is also
updated to use kImexPrimaryMode for consistency with the rest of the
codebase.
- Test test_3mf.cpp updated for upstream's load_bbs_3mf signature change
(PR adds is_orca_3mf out-parameter between is_bbl_3mf and file_version).
All three call sites in the new IMEX 3MF round-trip tests pass &is_orca
in addition to &is_bbl.
Full regression post-merge:
libslic3r: 143 cases / 48,553 assertions (+10 cases from new tests)
fff_print: 24 cases / 245 assertions (+10 cases from new tests)
sla_print: 21 cases / 14,100 assertions
libnest2d: 14 cases / 488 assertions
slic3rutils: 3 cases / 3 assertions
All tests pass.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Self-review found two weaknesses in the preceding test commits:
1) The equal-size [Variant] scenario claimed to distinguish the truncation
guard's `cur > target` predicate from a regression to `cur >= target`,
but both paths yield identical child values in practice: when
extruder_variant names match, set_with_restore's variant_index is fully
populated (no -1 slots) and the merge path restores every position from
backup — producing the same {1.5, 2.5} output as the skip path. The
test passes in both guard states.
Rewritten to use mismatched variant names between child and parent.
variant_index then has -1 slots, and set_with_restore overwrites those
positions with parent values. Now the merge path yields {0.8, 0.8} and
the skip path yields {1.5, 2.5} — observably different. Verified:
- `cur > target` (correct): 4 scenarios pass, 15 assertions
- `cur >= target` (regressed): equal-size scenario fails with
"1.5 is within 0.000000001 of 0.80000000000000004"
- Guard removed entirely: child>parent + stride=2 both fail with
truncation ("1 == 2" / "2 == 4")
2) The [3mf][IMEX] round-trip only covered a single plate. A plate-
indexing regression (IMEX metadata landing on the wrong plate, or
bleeding across plates on reload) would not have been caught.
Added a multi-plate scenario: two plates with distinct mode and
head-filament-map values. Asserts both land on their respective
destination plates after reload. Load-bearing verified:
- With IMEX serialization intact: 3 scenarios pass, 45 assertions
- With IMEX serialization disabled: positive + multi-plate fail
(both "nullptr != nullptr"); primary-mode passes (expects nullptr)
- With primary-mode short-circuit removed: primary-mode scenario
fails ("0x... == nullptr") because primary modes now serialize
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Validates that imex_parallel_mode and imex_head_filament_map survive a
full store_bbs_3mf → load_bbs_3mf cycle — the same silent-state-loss bug
class that produced the variant-vector truncation regression, applied to
IMEX plate state which rides the same XML metadata path.
- Positive round-trip: a plate with copy_mode + a non-trivial head
filament map ("1:2,2:3") is saved and reloaded; both options land on
the destination plate's config with the exact values preserved.
- Guard scope: a plate with mode="primary" and empty head-filament-map
does NOT emit metadata (per the serializer's short-circuit), and the
reload leaves both options absent from the destination config. If the
serializer ever regressed to writing primary-mode plates, the load
path would surface phantom "primary" strings on plates that shipped
clean — this catches that.
Both scenarios call set_temporary_dir to point the BBS exporter's backup
scaffolding at a writable per-process temp directory (by default it
resolves under root at runtime, which fails for non-root test
processes).
All 27 assertions in 2 test cases pass under [3mf][IMEX].
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Get libslic3r tests closer to passing
I can't get geometry tests to do anything useful. I've added extra
output, but it hasn't helped me figure out why they don't work
yet. That's also probably the last broken 3mf test doesn't work.
The config tests were mostly broken because of config name changes.
The placeholder_parser tests have some things that may-or-may-not
still apply to Orca.
* Vendor a 3.x version of Catch2
Everything is surely broken at this point.
* Allow building tests separately from Orca with build_linux.sh
* Remove unnecessary log message screwing up ctest
Same solution as Prusaslicer
* Make 2 TriangleMesh methods const
Since they can be.
* Move method comment to the header where it belongsc
* Add indirectly-included header directly
Transform3d IIRC
* libslic3r tests converted to Catch2 v3
Still has 3 failing tests, but builds and runs.
* Disable 2D convex hull test and comment what I've learned
Not sure the best way to solve this yet.
* Add diff compare method for DynamicConfig
Help the unit test report errors better.
* Perl no longer used, remove comment line
* Clang-format Config.?pp
So difficult to work with ATM
* Remove cpp17 unit tests
Who gives a shit
* Don't need explicit "example" test
We have lots of tests to serve as examples.
* Leave breadcrumb to enable sla_print tests
* Fix serialization of DynamicConfig
Add comments to test, because these code paths might not be even used
anymore.
* Update run_unit_tests to run all the tests
By the time I'm done with the PR all tests will either excluded by
default or passing, so just do all.
* Update how-to-test now that build_linux.sh builds tests separately
* Update cmake regenerate instructions
Read this online; hopefully works.
* Enable slic3rutils test with Catch2 v3
* Port libnest2d and fff_print to Catch2 v3
They build. Many failing.
* Add slightly more info to Objects not fit on bed exception
* Disable failing fff_print tests from running
They're mostly failing for "objects don't fit on bed" for an
infinite-sized bed. Given infinite bed is probably only used in tests,
it probably was incidentally broken long ago.
* Must checkout tests directory in GH Actions
So we get the test data
* Missed a failing fff_print test
* Disable (most/all) broken libnest2d tests
Trying all, not checking yet though
* Fix Polygon convex/concave detection tests
Document the implementation too. Reorganize the tests to be cleaner.
* Update the test script to run tests in parallel
* Get sla_print tests to build
Probably not passing
* Don't cause full project rebuild when updating test CMakeLists.txts
* Revert "Clang-format Config.?pp"
This reverts commit 771e4c0ad2.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Clifford Garwood