The mixed-colour metadata options are parallel per-slot arrays in the project
config. A project saved before they were sized per slot stores a single value
for the gradient ones, and one saved before they existed stores none. The GUI
sizes all seven to the filament count when it opens a project; the CLI kept
the stored arrays and exported one-element defaults for absent ones, so a
project it exported carried one-element arrays where the GUI writes one entry
per filament. Slicing is unaffected, every reader treats a missing entry as
not mixed / no gradient, but the GUI-vs-CLI comparison reported the four
gradient keys on every mixed-filament project.
The resize helper moves from PresetBundle.cpp, where it was file-local, to
PrintConfig.cpp next to set_filament_dev_options(). It creates an option the
config lacks before sizing it, a no-op for the bundle's project config where
all seven always exist. The CLI calls it with its filament count once the
project and loaded filaments are merged, after the check that every mixed
slot has a filament of its own.
The device drying options hold several values per filament, as many as
the filament preset gives, and a project stores them as the filaments'
values one after another. The CLI filament merge wrote them like an
option with one value per filament, putting each preset's first value at
the filament's own index, so a project with three filaments whose preset
gives "1", "0" was exported with 1;1;1;0;1;0 where the GUI writes
1;0;1;0;1;0.
The merge now leaves these options out of the per-filament pass and
rebuilds them afterwards from every filament's values in slot order.
Without a fixed number of values per filament one slot cannot be
replaced in place, so the stored values are kept when any slot has no
config to rebuild from.
A project's listed settings are carried onto its base preset by update_non_diff_values_to_base_config, which matched variants by exact name and id. A variant the base gained after the project was saved got the base's value, while the same value in a user preset now falls back to the preset's first variant of that extruder. So an old project opened with its printer preset already modified, and saving it wrote the base's values into the 3MF.
The function now maps variants with map_variant_indices, as update_diff_values_to_child_config does: a base variant the project does not list takes the project's first variant of the same extruder. The variant lists themselves stay the base's, so a fallback never writes one variant's name over another's.
* Add Missing Includes Across src/libslic3r
Every libslic3r source and header now directly includes the headers declaring what it uses, rather than relying on the precompiled header or transitive includes. Generated with clang-tidy misc-include-cleaner, with libslic3r headers spelled libslic3r/... so they resolve outside the library's private include paths. MultiMaterialSegmentation.hpp, Support/SupportParameters.hpp and Format/STEP.hpp are made self-contained by hand.
* Make the libslic3r Headers Compile on Their Own
Each now includes, or forward-declares, what it uses instead of relying on what its includers happened to include first. Left out: I18N.hpp, which errors on purpose when included from GUI code, and VoxelizeCSGMesh.hpp and SLA/bicubic.h, which nothing includes and which no longer compile at all.
* Add the Includes Missing From the Hand-Fixed libslic3r Headers
clang-tidy would not edit these headers while they failed to compile on their own, so the first pass skipped them. With the headers now self-contained, a second pass adds the rest.
* Keep Windows Setup Ahead of the Added libslic3r Includes
Print.cpp and Thread.cpp open with a _WIN32 block that has to come first; without the precompiled header, Print.cpp otherwise reaches windows.h through OCCT with NONLS defined and boost/regex fails. OpenVDBUtils.cpp and SLA/SupportTreeBuilder.cpp had includes inside #ifndef NOMINMAX, which libslic3r defines on Windows, so those were skipped there. .clang-tidy also ignores the MSVC STL and UCRT internals, Boost.Multiprecision's fwd.hpp and CPython's Windows include directory.
* Re-Add libslic3r Includes After the Clipper2 2.0.1 Migration
Rebasing onto main took main's version of the files the Clipper2 migration rewrote, so their added includes are restored here, along with includes for main's new code. Clipper2's individual headers are now ignored by clang-tidy: they only build the Z variant through clipper2_z.hpp, which defines USINGZ first, so including clipper.core.h and the like directly broke ClipperZUtils.cpp.
Five commits: a section view for the 3D canvas, a faster G-code preview, user
preset values kept on extruder variants they don't list, debug build CMake
fixes, and a 30 minute timeout on macOS notarization.
Two conflicts, both in GLCanvas3D. The header's were neighboring
declarations, kept from both sides. In the transparent pass, the section view
removed the assemble view's painter block that followed our ghost render;
the ghost render stays where it was, at the end of that pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* Keep User Preset Values on Extruder Variants They Don't List
A user preset stores the variant list its parent had when it was saved.
When the parent later gains variants, update_diff_values_to_child_config
matched variants by name only and left the new ones at the parent's
value, so the user's settings were silently replaced there, and a
re-save wrote the system values into the user's file.
An unmatched parent variant now takes the child's first variant of the
same extruder, the rule slicing already uses in get_config_index_base.
A child without a variant list covers the parent's first extruder. The
name match also no longer indexes the child's extruder ids when it has
none.
* Share One Variant Column Rule Between Slicing, User Presets and Projects
Three places chose which variant column a value comes from, each with
its own copy of "the same variant and owner, else the owner's first
column": get_config_index_base when slicing, the user preset merge in
update_diff_values_to_child_config, and normalize_filament_values_to_variants
for projects and the CLI.
find_variant_column now holds that rule and map_variant_columns applies
it to a variant list, so a change to how missing variants are filled
reaches all three. Each caller keeps its own copy step. There is no
behaviour change: G-code is identical before and after. The one
relaxation is that get_config_index_base no longer reads past a short
id list when its two lists differ in length, which its assert already
rules out.
* Rename variant column helpers to variant index
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
138 commits. The count is large because texture displacement merged with its
whole branch history behind it, going back to July, alongside config and preset
file locking across instances, a foundation for configurable printer agent
connections, and a day of smaller fixes and CI work.
Two conflicts, both the same shape: each side had appended to a sorted list and
git could not choose an order. libslic3r's CMakeLists gained InstanceLock
alongside our IMEXHelpers and IMEXZones, and the preset bundle loading test
gained an include for ParallelResolve alongside ours for IMEXHelpers. Both sides
kept, alphabetical. No logic conflicted.
Verified: 740 targets build clean under -Werror, and the Release suite passes
1740 of 1740, up from 1665 -- the 75 new cases arrived with the merge and all
pass. That mattered more than usual here, since preset loading and config
locking are both areas the IMEX preset code touches.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Eleven commits, including a typed-config G-code export speedup, a printer agent
refactor that generalizes the infrastructure beyond Bambu, gyroid optimization,
and three CLI crash fixes.
One conflict, in PrintConfig.cpp. Upstream introduced a new_def macro and began
migrating the placeholder table onto it, adding curr_bed_type that way in the
same block where this branch had added imex_mode, imex_mode_index and
imex_mode_gcode in the older def = this->add(...) form. Both sides are kept and
ours are converted to the macro, which expands to the same three statements and
wraps label and tooltip in L() exactly as before, so nothing changes about what
is registered or what is translatable.
Note for anyone building this branch: the agent refactor adds a dependency,
LibDataChannel, so the deps tree needs dep_DataChannel built before the app will
configure. A distribution package of the same name will be found first if one is
installed, and the resulting error names a missing RelWithDebInfo location
rather than the wrong package, so point LibDataChannel_DIR at the dependency
prefix if that happens.
Verified: 789 targets build clean under -Werror, and the Release suite passes
1665 of 1665, up from 1630 before the merge -- the 35 new cases arrived with it
and all pass.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Fan speeds, multi-tool ramming, the tower interface and flush temperature
fallbacks and the custom G-code placeholders now use the extruder variant a
filament prints with on each layer, instead of reading by filament id.
Include variant-aware validation, temperature and pressure controls, named nozzle selection, and filament sidebar refresh.
Co-authored-by: Codex <codex@openai.com>
Upstream moved pressure advance onto the extruder variant: enable_pressure_advance,
pressure_advance and the four adaptive keys joined filament_options_with_variant,
the repeated inline blocks in set_extruder() became a helper, and the lookups
moved from the filament id to get_filament_config_index().
All three conflicts were the same collision, because this branch had modified two
of those same inline blocks to pass a tool qualifier so each carriage is addressed
explicitly in parallel modes. Taking either side whole would have lost something:
upstream's drops the qualifier and leaves parallel carriages with no pressure
advance, ours drops the per-variant indexing and reads the wrong column on a
multi-variant printer. The helper now takes an optional tool, defaulting to -1,
which omits the qualifier. imex_pem_tool_for() already returns -1 off IMEX and in
primary mode, so non-IMEX output is unchanged, and the three call sites that never
passed a tool keep upstream's behavior exactly.
The third conflict was two test cases appended at the same place. Both are kept.
Separately, one defect that merged cleanly and so was not flagged: the loop that
emits pressure advance for secondary carriages at the start of a print still
bounded and indexed those vectors with a raw filament id. They are variant
expanded now, so their length is columns rather than filament slots -- the value
read was the wrong column, and the bound no longer sat in slot space, letting an
out-of-slot filament through. It now bounds on filament_diameter and translates
with get_filament_config_index(), which is what the sibling second-layer
temperature loop already does.
Verified: both changed translation units compile clean under -Werror. The merge
was resolved independently twice and the two resolutions agree on every line of
code. Not yet run: the Release test suite and a parallel-mode slice sweep.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Support variant-specific cooling, pressure advance, purge, ramming and temperature ranges. Keep shared U1 values as singletons and verify element-zero fallback for missing variant entries. Preserve preset migration aliases and validate high-flow selections using their declared nozzle volumes.
Co-authored-by: Codex <codex@openai.com>
Pressure advance, adaptive pressure advance and its model can now take a
different value for each extruder variant of a filament, such as Standard and
High Flow nozzles, like the other per-variant filament settings. Projects
saved with one value per filament apply it to every variant of that filament,
and the addnorth BBL filaments in the Orca Filament Library are updated to the
per-variant layout.
The two conflicts are both places where upstream landed on top of IDEX/IQEX
code. In GCode.cpp the relocated file header block meets the IMEX placeholder
block, and the placeholders are set first: file_start_gcode is processed through
the placeholder parser now, which throws on a name it does not know, so a script
naming {imex_mode} would abort the export if the header ran first. In
test_multifilament.cpp both sides appended a case at the end of the file.
The CLI turned "align to Y axis" on for every i3 printer with no way to opt
out. With rotations forbidden the pre-rotation is the result, so every object
ends up turned 90 degrees from how it was loaded. The GUI defaults the
checkbox the same way for i3 printers, but lets the user untick it.
Add --align-to-y-axis. When it is not given the printer-structure rule still
applies, so existing calls are unchanged; the CLI's own options are filled
with defaults after parsing, so the keys the user typed are remembered to
tell the two apart.
* Add Ultimaker S5 Profile - WIP
* Add Ultimaker physical printer base
* Ultimaker API WIP for base update.
* Fix undefined reference error.
* Add UMS5 profile, add placeholders for testAuth stuff.
* Fix non-const func definitions, make func names align with style guide.
* Localization stuff? IDK if this does anything or is required.
* Add cover image
* Auth code cleanup, add UI button for auth cred generation, implement various auth checks and tests.
* Fix auth stuff
* Clean up code
* Get upload code sort-of working, fix typo
* Update printer settings and start/end gcodes
* Add makeGriffinCompatible preprocessor script to prevent machine crash, update machine profile.
* Fix buildplate size, fix time missing bug, add S5 buildplate model
* Correct capitalization to UltiMaker
* Fix display bug, fix capitalization bug
* Implement credential generation button and logic
* Fix generate auth creds button, add todos, fix capitalization.
* Actually fix generate auth credentials.
* Fix generate auth creds message.
* Update UM S5 machine limits
* Revert accidental commit.
* Fix postprocessor, clean up code.
* Update presets for multi-extruder printing.
* Add Single Extruder and Fast profiles.
* Code cleanup
* Register and validate the UltiMaker S5 presets
* Show the Generate API Key button only for UltiMaker print hosts
The PR added it to the Physical Printer dialog for every host type, where pressing it runs an ordinary connection test and reports "API Key created". Gate it on the selected host type instead.
* Drop unused lambda captures in the UltiMaker host code
clang promotes -Wunused-lambda-capture to an error under the project's -Werror, so the file failed to build on macOS; the five callbacks do not touch this.
* Fix the Windows build of the UltiMaker print host
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Four files overlapped, and each resolution favours upstream where the two sides
had done the same work:
WipeTower's M104/M109 tool qualifier. Both sides bounds-checked the physical
extruder map lookup; upstream omits the T qualifier when the map cannot answer,
where this branch fell back to the logical index and so named a carriage that may
not be the one printing. Upstream's behaviour is what this branch documents
elsewhere, so its version is taken and the local helper is dropped.
get_extruders' mixed-slot switch. Upstream added the same concept to the CLI
overload as expand_mixed_slots, so the GUI overloads' parameter is renamed to
match rather than carrying two names for one idea.
GLCanvas3D's sequential-clearance branch gains upstream's
update_compacted_wipe_tower_clearance for the by-layer case.
The printer_agent re-sync in TabPrinter::reload_config was upstream's and their
preset-undo fix removed it, so it goes; the IMEX modes grid re-sync beside it
stays, since it spans three options and is not a Field.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The parallel printing options shipped to testers as is_ixex and ixex_*,
became is_imex and imex_* when the feature stopped being called iXex, and
the two clearance keys were renamed once more to say what they measure:
nozzle to carriage edge on the collision side, not the carriage's full
width. Nothing translated any of it, so loading an existing printer profile
dropped every one of these values - the keys are unknown and cleared.
is_ixex is the one that matters most, because without it the others migrate
into a feature that stays switched off, leaving settings that look
configured and do nothing.
Per-plate mode is persisted twice and only one path went through
handle_legacy. Plate metadata in a 3MF is matched by exact attribute name
and written with set_key_value, so a project saved between the per-plate
mode landing and the rename loaded every plate back on Primary and sliced
single-carriage with no warning. The loader now accepts the old attribute
name.
ixex_primary_col and ixex_primary_row are dropped rather than mapped: the
primary is a role inside the mode's active-tools string now, not a grid
coordinate, and they were never in an option list, so no saved file carries
them.
The test drives the full era-1 key list and asserts the enum values rather
than non-nullness, since a forward-compatible substitution would otherwise
hide a failed deserialize behind a default. handle_legacy had no test before
this.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* CLI: --inspect-paint — dump per-facet paint state as JSON
Reads the per-facet enforcer/blocker/extruder/fuzzy-skin state stored
on every ModelVolume (supported_facets / seam_facets /
mmu_segmentation_facets / fuzzy_skin_facets) and emits a structured
JSON summary to stdout. Machine-readable alternative to opening the
paint gizmos.
Per (object, volume, layer, state): facet count, surface area in
mm², and mesh-local bounding box. Empty layers collapse to
{"empty": true}. Summary at the top level rolls up totals.
One correctness detail worth calling out: FacetsAnnotation::
get_facets_strict returns an indexed_triangle_set whose `vertices`
array is the whole source mesh — only `indices` are filtered to the
painted triangles. A naive bounding_box(its) would report the whole
mesh's bbox even when only a few facets are painted. The helper
its_referenced_bbox() walks only the vertices actually indexed by
the painted triangles, so `bbox` correctly localizes the painted
region.
Rationale: every paint-driven workflow — GUI-painted .3mf verified
in CI, AI agents planning support enforcers, MMU color layout checks
— needs to know what's already painted on a model. Today that's a
GUI-only read. --inspect-paint closes that loop for scripted callers.
New file src/slic3r/Utils/PaintCLI.{hpp,cpp} (~215 lines). Depends
only on Model, TriangleMesh, TriangleSelector, FacetsAnnotation, and
nlohmann::json — all already in tree. No new dependencies, no
signature changes, no behavior change when the flag is absent.
Registered as an action (parallel to --info) so it satisfies the
"needs an action" check and bypasses the GUI fallback; control falls
through the normal post-action path to a clean exit 0.
Verification:
unpainted STL: every layer {"empty": true}, summary zero
GUI-painted .3mf: enforcer count / area / bbox match painter
clean JSON: parseable via jq
* CLI --inspect-paint: exit after printing, reject conflicting actions
- Finish like the end of CLI::run once the JSON is written, as the
tooltip says. The callback manager is Linux-only, so its use is
guarded.
- Reject actions that would otherwise be skipped without notice
(--slice, --export-3mf, ...) before loading. Load-time options such as
--uptodate are still accepted.
- Replace invalid UTF-8 in object names and paths instead of throwing.
- Report every input file as sources; inputs are merged into one model
before actions run.
* CLI --inspect-paint: reject a run without input
Without an input file or --load-assemble-list there is nothing to
inspect, and the run printed nothing and exited 0. Reject it up front
with CLI_INVALID_PARAMS, next to the other invalid-parameter checks.
Rodrigo Faselli