src/slic3r/GUI/wxMediaCtrl3.cpp:181:23: error: ‘info’ was not declared in this scope
181 | BOOST_LOG_TRIVIAL(info) << msg.ToUTF8().data();
| ^~~~
src/slic3r/GUI/wxMediaCtrl3.cpp:181:5: error: ‘BOOST_LOG_TRIVIAL’ was not declared in this scope
181 | BOOST_LOG_TRIVIAL(info) << msg.ToUTF8().data();
| ^~~~~~~~~~~~~~~~~
(cherry picked from commit c5c41e20ca2fc7f3b53a4c769961f73df6992008)
src/slic3r/GUI/wxMediaCtrl3.cpp: In member function ‘void wxMediaCtrl3::paintEvent(wxPaintEvent&)’:
src/slic3r/GUI/wxMediaCtrl3.cpp:121:5: error: ‘wxPaintDC’ was not declared in this scope; did you mean ‘wxPoint’?
121 | wxPaintDC dc(this);
| ^~~~~~~~~
| wxPoint
(cherry picked from commit 9ab5009235d212699f91e01d7f930f92849ed1e3)
src/slic3r/GUI/wxMediaCtrl2.cpp: In lambda function:
src/slic3r/GUI/wxMediaCtrl2.cpp:170:13: error: ‘wxMessageBox’ was not declared in this scope; did you mean ‘wxInfoMessageBox’?
170 | wxMessageBox(_L("Your system is missing H.264 codecs for GStreamer, which are required to play video. (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-libav packages, then restart Bambu Studio?)"), _L("Error"), wxOK);
| ^~~~~~~~~~~~
| wxInfoMessageBox
src/slic3r/GUI/wxMediaCtrl2.cpp: In member function ‘void wxMediaCtrl2::Load(wxURI)’:
src/slic3r/GUI/wxMediaCtrl2.cpp:179:5: error: ‘wxLog’ has not been declared
179 | wxLog::EnableLogging(false);
| ^~~~~
(cherry picked from commit 73908d38d8b1f7c8dcae92d55711bc08cbfff23c)
In file included from src/slic3r/GUI/AVVideoDecoder.cpp:1:
src/slic3r/GUI/AVVideoDecoder.hpp:28:20: error: ‘wxImage’ has not been declared
28 | bool toWxImage(wxImage &image, wxSize const &size);
| ^~~~~~~
src/slic3r/GUI/AVVideoDecoder.hpp:28:36: error: ‘wxSize’ has not been declared
28 | bool toWxImage(wxImage &image, wxSize const &size);
| ^~~~~~
src/slic3r/GUI/AVVideoDecoder.hpp:38:10: error: ‘vector’ in namespace ‘std’ does not name a template type
38 | std::vector<uint8_t> bits_;
| ^~~~~~
src/slic3r/GUI/AVVideoDecoder.hpp:9:1: note: ‘std::vector’ is defined in header ‘<vector>’; did you forget to ‘#include <vector>’?
8 | #include <libswscale/swscale.h>
+++ |+#include <vector>
9 | }
src/slic3r/GUI/AVVideoDecoder.cpp:145:89: error: invalid use of incomplete type ‘class wxBitmap’
145 | bitmap = wxBitmap((char const *) bits_.data(), size.GetWidth(), size.GetHeight(), 32);
| ^
(cherry picked from commit 781ce14e061366da64fdc2d0d592fa35ee57e67e)
src/slic3r/GUI/wxMediaCtrl3.h:80:10: error: ‘condition_variable’ in namespace ‘std’ does not name a type
80 | std::condition_variable m_cond;
| ^~~~~~~~~~~~~~~~~~
src/slic3r/GUI/wxMediaCtrl3.h:27:1: note: ‘std::condition_variable’ is defined in header ‘<condition_variable>’; did you forget to ‘#include <condition_variable>’?
26 | #include "Printer/BambuTunnel.h"
+++ |+#include <condition_variable>
27 |
src/slic3r/GUI/wxMediaCtrl3.h:81:10: error: ‘thread’ in namespace ‘std’ does not name a type
81 | std::thread m_thread;
| ^~~~~~
src/slic3r/GUI/wxMediaCtrl3.h:27:1: note: ‘std::thread’ is defined in header ‘<thread>’; did you forget to ‘#include <thread>’?
26 | #include "Printer/BambuTunnel.h"
+++ |+#include <thread>
27 |
In file included from src/slic3r/GUI/MediaPlayCtrl.h:17,
from src/slic3r/GUI/MediaPlayCtrl.cpp:1:
src/slic3r/GUI/wxMediaCtrl3.h:77:13: error: field ‘m_frame’ has incomplete type ‘wxImage’
77 | wxImage m_frame;
| ^~~~~~~
(cherry picked from commit 727a73333bd67acf5ff2b1c51ff284c2bacdb413)
* Move Generic vendor above Bambu vendor in AMS material setting.
* Remove hardcoded sorted_names. Alphabetically sort Bambu with all vendors
* Fix sorting with case insensitive comparison
* Use arithmetic to get rank distance because priorities are stored in a vector. This lets us remove the <interator> include.
* Move currently active filaments added to the Prepare sidebar to the top of the AMS Material Selection combo box.
It is likely the user wants to set the material to the currently active filament.
* Reduce logging verbosity.
* Refactor current active preset filament finding to find nested preset inheritance.
* Initialize pointer to null before usage.
* Remove old commit code
* Remove new line
---------
Co-authored-by: Ioannis Giannakas <59056762+igiannakas@users.noreply.github.com>
Co-authored-by: yw4z <ywsyildiz@gmail.com>
* Fix detached copies of system presets
* Clarify detached preset compatibility
* Show unique preset state in save dialog
* Update SavePresetDialog.cpp
---------
Co-authored-by: yw4z <ywsyildiz@gmail.com>
* fix(GUI): honor "Ignore" when layer height exceeds the configured maximum
Entering a layer height above the printer's max_layer_height on the Print
Settings tab fired two guards in sequence. Tab::on_value_change prompts
"...Adjust to the set range automatically?" with an Adjust/Ignore choice, and
ConfigManipulation::update_print_fff_config then showed an OK-only "Too large
layer height. Reset to X" dialog whose result was never checked, so it always
reset the value. The second guard overrode the user's "Ignore", resetting the
layer height regardless.
Changes:
- Extract the shared Adjust/Ignore dialog into
ConfigManipulation::layer_height_out_of_range_dialog, reused by the tab
(Tab::on_value_change) and the per-object/part settings panels. The dialog now
names the value it will clamp to and reads correctly for too-low as well as
too-high.
- The tab/plate path is already covered by Tab::on_value_change, so the
duplicate reset is dropped from update_print_fff_config.
- The per-object/part panels have no on_value_change hook, so add
ConfigManipulation::check_object_layer_height and call it from the object
settings update paths, gated on the edited option (changed_opt_key ==
"layer_height"). It prompts once per layer-height edit and does not re-prompt
when unrelated object settings change after the user chose "Ignore".
Fixes#14214
* refactor(GUI): unify the layer-height range check across tab and object panels
Copilot review of #14369 noted that the per-object check only guarded the
max at extruder 0 and skipped the too-low case, diverging from the tab.
Move the whole range check into ConfigManipulation::check_layer_height,
used by both Tab::on_value_change and the per-object/part panels. It takes
the widest [min, max] window across the printer's extruders, offers
Adjust/Ignore in both directions, and resets a near-zero value. The tab's
inline block collapses to one call, dropping the duplicated limit logic.
* fix(GUI): only enforce layer-height limits that are actually set
max_layer_height defaults to 0 (unset), so the unconditional range check
offered to clamp any layer height to 0 on presets that don't define it.
Guard each branch (near-zero, too-high, too-low) so an unset limit disables
that direction; the slice-time nozzle-diameter check still applies.
Also run check_layer_height before update_print_fff_config in the object
panels so a near-zero per-object value prompts the same way the tab does,
with update_print_fff_config's fallback still covering the no-minimum case.
_update_select_plate_toolbar_stats_item(true) runs from
on_action_slice_all before the select-plate toolbar has necessarily been
initialized. m_all_plates_stats_item is only assigned in
_init_select_plate_toolbar, so slicing a multi-plate project shortly
after startup (before the Preview tab has rendered) leaves the pointer
null while show_stats_item is true, and the branch dereferences it,
crashing with SIGSEGV.
Every other dereference of this pointer already null-checks it. Add the
same check here so the all-plates stats item is left unselected until the
toolbar is initialized instead of crashing.
Fixes#15116
Fix Windows crash in Replace all with 3D file
Keep the replacement result message as wxString and substitute the volume
name directly.
On Windows, wxString::ToStdString() cannot encode the Unicode status icon
through the active ANSI code page and returns an empty string. Passing that
empty string to boost::format with a volume-name argument throws
boost::too_many_args and exits OrcaSlicer.
Prime towers reserved depth from the prime volume alone, ignoring the flush
matrix: rib-wall towers in both the engine and the preview, and rectangle and
cone towers in the preview, which never carried the flush-aware estimate the
engine already used. The preview also read the print preset, which does not
carry the printer- and filament-scope keys the estimate needs and so silently
fell back to defaults. On multi-nozzle printers the flush matrix, which holds
one block per nozzle, was additionally read as a single block. The tower could
come out too small for the purge it has to hold.
The flush-based estimate also skipped the height-based minimum depth that the
prime-volume one applies, so low-flush prints could estimate a tower shallower
than the one that actually gets built.
The placement clamps and the tower-approach router both stood in the bed's
bounding box for the bed itself, so on a delta or hexagonal bed the prime tower
could be parked in a corner that does not exist and the nozzle could be routed
across it. Both now test the real printable outline, slicing reports a tower
that does not fit instead of printing it off the bed, and a tower parked near an
edge is routed along the clamped side rather than falling back to a straight
line across the tower.
Also fixes the placement validation rotating the tower hull by degrees read as
radians about the plate origin, and never rotating the generated tower footprint
at all.
Adds a printer option that picks up the new tool without a blocking temperature
wait, travels to the wipe tower, and waits there right before purging, parked
beside the tower so the ooze from the heat-up lands next to it rather than on the
model. The incoming filament's target is raised ahead of the tool change, so the
heat-up overlaps both the change itself and the travel to the tower.
Off by default, and only offered for multi-extruder printers using a Type 2 wipe
tower; the generic toolchanger profile enables it.
* fixes: memcpy(...) writing to an object of type OrientParams with no trivial copy-assignment; use copy-assignment or copy-initialization instead [-Wclass-memaccess]
* review result: replaces anonymous namespace with static
* fixes: %g directive writing between 1 and 13 bytes into a region of size between 6 and 18 [-Wformat-overflow=]
* fixes: %5s directive writing between 5 and 63 bytes into a region of size 58 [-Wformat-overflow=]
* fixes: catching polymorphic type by value [-Wcatch-value=]
* fixes: [-Wcomment]; removes whitespaces
* increases buffer size from 71B to 90B to avoid potential ovfl.
* update snapmaker profiles. largely ported for Snapmaker Orca fork
* update prime volume
* set precise_outer_wall to 1
* Update per-material multi-tool ramming to the filament library
* Add per-filament overrides for toolchange retraction
* Set toolchange retraction per filament for Snapmaker U1
* set default support type to tree
* format snapmaker profiles
* fix: make the error dialog caret point at the character it's blaming
Custom G-code parse errors print the offending line with a '^' under the
character that broke, positioned with spaces so it only lines up in a
fixed-width font. Since v2.3.2 these dialogs rendered entirely in the
proportional UI font, so the caret drifted left of its column and landed
on unrelated text.
Render only the code excerpts (the offending source line and its caret) in
the fixed-width face, leaving the surrounding prose in the UI font, and
reserve the horizontal scrollbar's height so a long line does not clip.
Rename the flag to has_code_excerpts to match what it now means.
Fixes#14869
* refactor(GUI): use <code> instead of <tt> for error excerpts
wxHTML maps <tt>, <code>, <kbd> and <samp> to the same fixed-width
handler, so this renders identically. <code> is the non-deprecated
tag and matches what the original code used.
* fix(GUI): align the error caret with real spaces, not
The caret line was padded with so its spaces would survive inline
HTML. wxHTML measures every glyph by its font extent, so where the fixed
font lacks a U+00A0 glyph the fallback renders it about twice as wide, and
the all- caret line outran the source, drifting the ^ to the right.
Wrap the excerpts in a small <excerpt> tag, registered on the dialog's own
parser, that switches on wxHTML literal-whitespace mode so the caret uses
real spaces that match the source column in any font. It sits inside <code>
for the fixed face; <pre> would do both but forces a blank line above it.
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
Replace per-printer auto-activation
(is_current_printer_agent_plugin)
with a global experimental AppConfig
toggle, default off: legacy
print-host behavior is unchanged
until the user opts in. The toggle
drives device-tab routing, print
button defaults, connect-button
visibility and sidebar layout, and
dedups machine-select dialog opens.
set_live_printer_agent centralizes
the swap: deselect the machine,
clear stale sidebar state and the
previous agent's Other Devices, then
install the new agent (or null when
its provider vanished). Plugin
load/unload callbacks refresh the
dropdown and re-run agent selection.
load_last_machine no longer falls
back to the first available machine.
A dedicated PrinterAgentChoice field
reads rows straight from the live
agent registry and stores the agent
id string, replacing the fake-coEnum
index mapping. The field moves to
TabPrinter and registers with the
searcher so UnsavedChanges renders
it; the PhysicalPrinterDialog copy
and its update hook are removed
(#125). switch_printer_agent now
resolves ids via
resolve_printer_agent_id.
* Fix gizmo being closed after releasing mouse outside the gizmo floating window
The left up event of a drag started on the gizmo floating window (e.g.
selecting text in an input field) and released over the bed was treated
as a click on the plate, which deselected the objects and closed the
active gizmo. Add the ignore_left_up guard to the plate select branch,
matching the deselect branch above.
Co-Authored-By: Claude <noreply@anthropic.com>
* Fix Emboss gizmo being closed after releasing mouse outside its floating window
The Emboss gizmo has its own close-on-click-away handler
(on_mouse_change_selection) that was not protected against left up events
originating from ImGui windows, so the gizmo was still closed when a drag
started on its floating window (e.g. selecting text in the input field)
ended over the 3D scene. Expose the canvas's ignore_left_up state to
gizmos and skip the close check for such releases.
Co-Authored-By: Claude <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* Remove titlebar from splash screen on Wayland
* Broadly check for window decorations and added explanatory description
* Fixed hiding title bar on Wayland for all desktop environments
* Update format
---------
Co-authored-by: noisyfox <timemanager.rick@gmail.com>
chunmao.guo