* CLI: --inspect-paint — dump per-facet paint state as JSON
Reads the per-facet enforcer/blocker/extruder/fuzzy-skin state stored
on every ModelVolume (supported_facets / seam_facets /
mmu_segmentation_facets / fuzzy_skin_facets) and emits a structured
JSON summary to stdout. Machine-readable alternative to opening the
paint gizmos.
Per (object, volume, layer, state): facet count, surface area in
mm², and mesh-local bounding box. Empty layers collapse to
{"empty": true}. Summary at the top level rolls up totals.
One correctness detail worth calling out: FacetsAnnotation::
get_facets_strict returns an indexed_triangle_set whose `vertices`
array is the whole source mesh — only `indices` are filtered to the
painted triangles. A naive bounding_box(its) would report the whole
mesh's bbox even when only a few facets are painted. The helper
its_referenced_bbox() walks only the vertices actually indexed by
the painted triangles, so `bbox` correctly localizes the painted
region.
Rationale: every paint-driven workflow — GUI-painted .3mf verified
in CI, AI agents planning support enforcers, MMU color layout checks
— needs to know what's already painted on a model. Today that's a
GUI-only read. --inspect-paint closes that loop for scripted callers.
New file src/slic3r/Utils/PaintCLI.{hpp,cpp} (~215 lines). Depends
only on Model, TriangleMesh, TriangleSelector, FacetsAnnotation, and
nlohmann::json — all already in tree. No new dependencies, no
signature changes, no behavior change when the flag is absent.
Registered as an action (parallel to --info) so it satisfies the
"needs an action" check and bypasses the GUI fallback; control falls
through the normal post-action path to a clean exit 0.
Verification:
unpainted STL: every layer {"empty": true}, summary zero
GUI-painted .3mf: enforcer count / area / bbox match painter
clean JSON: parseable via jq
* CLI --inspect-paint: exit after printing, reject conflicting actions
- Finish like the end of CLI::run once the JSON is written, as the
tooltip says. The callback manager is Linux-only, so its use is
guarded.
- Reject actions that would otherwise be skipped without notice
(--slice, --export-3mf, ...) before loading. Load-time options such as
--uptodate are still accepted.
- Replace invalid UTF-8 in object names and paths instead of throwing.
- Report every input file as sources; inputs are merged into one model
before actions run.
* CLI --inspect-paint: reject a run without input
Without an input file or --load-assemble-list there is nothing to
inspect, and the run printed nothing and exited 0. Reject it up front
with CLI_INVALID_PARAMS, next to the other invalid-parameter checks.
* Toolchange Cyclic Order
* Apply cyclic order to first layer
* Unit test
* Copilot fixes
---------
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
* CLI: --ground-face-* / --lay-flat / --center-on-bed orientation primitives
Adds the CLI counterparts to the GUI's lay-flat / face-pick gizmos.
Scripted / CI / AI pipelines can now set orientation without rendering
a wxWidgets frame; today the only way is a GUI round-trip.
New CLI actions (all operate in the mesh-local frame so they compose
with prior --rotate-* / --orient flags):
--ground-largest-face 1 Auto-detect the largest planar-face
or --lay-flat 1 cluster (area-weighted), rotate so its
normal points -Z. Covers "this part has
one obvious flat side" cases.
--ground-face-normal NX,NY,NZ Pick the face whose mesh-local
normal best matches the given
vector; ground it. e.g.
`--ground-face-normal 1,0,0`
stands a part on its +X side.
--ground-face-point X,Y,Z Find the triangle containing the
given mesh-local point; ground its
face. Disambiguates when several
faces share a normal (largest
containing triangle wins).
--center-on-bed 1 Translate so the XY bounding-box
centroid lands at the bed center
(derived from printable_area).
New file `src/slic3r/Utils/MeshOrient.{hpp,cpp}`:
- collect_triangles_object / compute_face_clusters — quantize
per-triangle normals (0.001, ~0.06°) and area-weighted-average
within clusters. Same clustering logic used by lay-flat.
- apply_ground_rotation — same math as Selection::flattening_rotate
in the GUI (Selection.cpp:1432): world-space quaternion from the
transformed normal to -Z, applied as offset * new_rot * old_no_offset
on every instance of every object, then a per-instance Z-lift so the
grounded face lands at exactly 0 (avoids "No layers were detected"
from FP-error z≈-1e-9).
- ground_face_point uses a top-N cluster search + point-in-triangle
test in local space; largest-area triangle wins on ambiguity.
Rationale: without these, any CLI pipeline that needs a specific
face on the bed must either encode custom rotation math per part or
break out of the pipeline into the GUI. Both are bad for
reproducibility. The --ground-face-* triple + the largest-face
auto-mode cover essentially every orientation intent expressible
in a slicing wizard.
Scope:
- `src/slic3r/Utils/MeshOrient.{hpp,cpp}` — new, ~420 lines
- `src/slic3r/CMakeLists.txt` — 2-line registration
- `src/libslic3r/PrintConfig.cpp` — 5 new CLIMiscConfigDef entries
- `src/OrcaSlicer.cpp` — 58-line handler block + 1 include
No behaviour change when the flags are absent.
(cherry picked from commit c45a9795e1)
* CLI grounding: choose among the Lay on Face planes, per object
Addresses review:
- Move the geometry of GLGizmoFlatten::update_planes() into
libslic3r/LayOnFace and use it from the gizmo and the CLI, so the
--ground-* options pick convex-hull faces per object and instance,
with part transformations (--rotate-x/y) applied.
- Drop --center-on-bed, the --lay-flat alias and MeshOrient; make
--ground-largest-face a coBool.
- Parse --ground-face-normal and --ground-face-point strictly. A point
that only some objects contain grounds those and leaves the others.
- Fold in --inspect-mesh from #14603, reporting the same planes.
- Tests in tests/libslic3r/test_lay_on_face.cpp: bounding boxes before
and after, rotate then ground, two objects, and a ribbed part whose
parallel inner faces outsum its base.
* CLI --inspect-mesh, --ground-face-*: reject missing input and empty values
- Without an input file or --load-assemble-list, --inspect-mesh printed
nothing and exited 0. Reject it up front with CLI_INVALID_PARAMS.
- An explicit empty --ground-face-normal or --ground-face-point was
silently ignored. Only options given on the command line reach the
transforms loop, so an empty value now fails the strict parse like any
other malformed value.
A valid mixed filament already slices the same on the CLI as in the GUI;
these are the places where the CLI still skipped a rule the GUI applies.
- Keep the prime tower when a mixed filament is used, even if every
--load-filaments preset is the same. A mixed filament swaps between its
components every layer, so turning the tower off left the swaps with
nothing to purge on.
- Leave a mixed slot's row and column of the flush matrix at zero when
--filament-colour triggers a recompute, as the GUI does; a mixed slot
never reaches a nozzle.
- Refuse a mixed slot that has no filament of its own. Feature filament
ids aimed at it were past the filament count, got reset to filament 1
and the model silently printed in one colour.
- Refuse a plate that uses a mixed filament whose components are
different filament types, the type half of the GUI's
Sidebar::has_broken_mixed_filament. Missing or out-of-range components
are already rejected for the whole project by validate().
get_extruders_under_cli gains an expand_mixed_slots flag so the gate
can see mixed slots rather than their components; existing callers
keep the expanded list.
Both refusals exit with the new CLI_MIXED_FILAMENT_INVALID (-69).
A build without SLIC3R_PCH had never been tried on macOS. Three files
used what pchheader.hpp happened to include: LocalesUtils.cpp needs
<sstream> and <iomanip>, and the two dialogs need <wx/tooltip.h>. The
GTK port's headers and libstdc++ pull these in transitively, the Cocoa
port's headers and libc++ do not.
# Description
Each plate keeps a registry of the instances it holds
(`PartPlate::obj_to_instance_set`). The plate's filament list
(`get_extruders`), its wipe tower preview and position clamp, the object
list grouping and the saved project's per-plate instance list all read
it. Two paths left it stale:
* `Plater::increase_instances` (the `+` key / toolbar) adds the copy to
the model but never registers it with any plate.
* `GLCanvas3D::do_move` (drag release and arrow keys) ended with
`notify_instance_update(-1, 0)`, so only instance 0 of each selected
object was re-registered. Rotate, scale and mirror already notify every
instance.
So a copy created with `+` and dragged onto another plate stayed unknown
to that plate: the project saved afterwards listed it on no plate, and a
multi-filament copy moved onto a single-filament plate drew no wipe
tower there and never got its tower position clamped. The Print side
selects instances by geometry, so the plate still sliced, which is why
this went unnoticed.
This PR
* registers new copies with their plate at creation;
* has `do_move` notify exactly the instances it moved (every instance of
the object when a part was moved in Volume mode), rather than instance 0
or all instances - notifying an instance that stayed put invalidates its
plate's slice result, so `(-1, -1)` as used by rotate would have
un-sliced every plate holding a sibling copy;
* drops the registry entry again when `decrease_instances` removes a
copy.
A second commit finishes the switch #15532 started with
`contain_any_instance_totally()`: `get_extruders_without_support()`,
`check_single_extruder_mixed_filament_risk()` and
`check_compatible_of_nozzle_and_filament()` still tested instance 0
only, so an object whose copy - not its original - sits on the plate was
skipped by all three.
No new options, no format change. The `is_new` flag is deliberately not
passed for the copies: a copy landing on a spiral-vase plate gets the
same "apply spiral mode settings?" prompt a dragged instance gets,
instead of a silent rewrite of the object's settings.
# Screenshots/Recordings/Graphs
Before:
<img width="1920" height="1080" alt="05-moved"
src="https://github.com/user-attachments/assets/3cf9f5a9-1a4e-41e8-8c57-578f849d8c29"
/>
After:
<img width="1920" height="1080" alt="05-moved"
src="https://github.com/user-attachments/assets/1b801a7e-b7cd-4ffb-bd1d-b701f90dade6"
/>
## Tests
Re-run after the rebase, both binaries driven through the same headless
harness (Xvfb 1920x1080, llvmpipe) on the same fixture: `cubeA`
(filament 1) alone on plate 1, `cubeB` (a two-part object, filaments 2
and 1) alone on plate 2, so plate 1 shows no wipe tower at load. Select
the plate-2 object, press `+`, walk the copy onto plate 1 with 36 x Left
(10 mm per press, one `do_move` each), save, slice plate 1.
Before is main `8af92214d0` - i.e. with #15532's
`contain_any_instance_totally()` already in place, so the only
difference is this PR.
* **Before:** the saved `model_settings.config` lists plate 1 with
`cubeA` only and plate 2 with `cubeB` instance 0. The copy (instance 1)
is listed **on no plate at all**, and plate 1 draws no wipe tower even
though a two-filament object is sitting on it.
* **After:** plate 1 lists `cubeA` **and** `cubeB` instance 1; plate 2
still lists instance 0. The plate-1 tower preview appears, and slicing
plate 1 succeeds with the tower actually generated - the filament panel
reports 1.10 m / 0.48 m in its Tower column over 51 filament changes,
and the G-code carries `EXCLUDE_OBJECT_END NAME=cubeB.stl_id_1_copy_0`.
Same camera and fixture on both runs, so the screenshots above are
directly comparable.
* build: clear 2 warnings - cast the NSTextField the class check already proved
mainframe_text_field is NSTextField* and was assigned a bare NSView*, which
Clang reports as -Wincompatible-pointer-types. Both assignments sit inside
if ([viewObject class] == [NSTextField self]), so the runtime type is already
guaranteed, and the line above the second one casts the same variable the same
way to call setTextColor. macOS only, since nothing else compiles this file.
* build: clear 6 warning categories from the clang-cl inventory
-Wmissing-braces (9). Aggregates whose first member is itself an aggregate.
GUID's fourth member is BYTE[8], so the trailing eight bytes take their own
braces. The others were reaching for zero-initialization with {0} and say {}
now. bbs_3mf's backup Task ends in an anonymous union, which needs braces of
its own; those braces initialize the union's first member rather than the one
named at the call site, so the RemoveBackup site says so in a comment.
-Wmacro-redefined (11). SendMultiMachinePage.hpp defines five names that
Preferences.hpp, PresetBundleDialog.hpp, ExportPresetBundleDialog.hpp and
TroubleshootDialog.hpp also define with different values, so the value in
force depended on include order. All nine of this file's DESIGN_ macros take
the SEND_ prefix it already uses for its own macros, values unchanged, so a
DESIGN_ name added elsewhere later cannot collide with it again. They read as
one page-local palette, a 900 to 400 gray ramp plus sizes, so the four with
no current readers stay: dropping them would leave gaps in a named scale. test_marchingsquares.cpp defines NOMINMAX,
which libslic3r already passes as a PUBLIC compile definition, so it takes
the #ifndef guard the other suites use.
-Wbraced-scalar-init (3). Two PushStyleVar calls resolve to the float
overload, so the braces were initializing a scalar. ConfigOptionFloatsNullable
already takes an initializer_list, so the inner braces did the same thing.
-Wmicrosoft-goto (2). Both gotos in copy_file_gui jump forward over the
initialization of size, dwRead and dwWrite, which only MSVC accepts. Those
declarations move up to join the others at the top of the function.
-Wunused-private-field (3). Every use of ColourPicker's m_clrData and
m_picker_widget is behind !defined(__linux__), so on Linux they are written
and never read; the members now carry the same guard. ParamsPanel's
m_size_move is read nowhere. Tab has its own, which is the one Tab.cpp uses.
-Wnonportable-include-path (2). BaseException.h asked for "stackwalker.h"
and the file on disk is StackWalker.h.
get_extruders() and estimate_wipe_tower_size() already ask whether any
instance of an object sits on the plate; the support-less extruder scan, the
mixed-filament risk check and the nozzle/filament compatibility check still
tested instance 0 only, so an object whose copy - not its original - was
placed on the plate was skipped by all three.
An instance added with "+" was never registered with the plate it landed on,
and moving an instance only re-registered instance 0 of its object, so a copy
dragged onto another plate stayed unknown to that plate's registry. The
plate's filament list, its wipe tower preview and the position clamp all read
that registry, so a multi-filament copy moved onto a single-filament plate
drew no tower there and its tower position was never clamped.
Register new copies at creation, notify exactly the instances a move changed
(every instance of the object when one of its parts moved), and drop the
registry entry when a copy is removed again.
build: clear eleven single-site clang-cl warning categories
Each of these is the last site left in its category, and every one is the
compiler saying it cannot tell what the code meant. Nothing here changes
defined behavior.
- OrcaSlicer_app_msvc.cpp printed a DWORD with %d
- StackWalker.cpp ran delete[] through an LPVOID
- ToolOrdering.cpp used a bare ; as a deliberate skip loop's body
- WipeTower.cpp had finish_block_tcr = finish_block_tcr, so the branch that
reached it did nothing. Folding the condition into the enclosing if leaves
the other branch untouched
- GCodeProcessor.cpp had an else binding to the inner if while the outer if
carried no braces
- AmsMappingPopupUpdate.cpp wrote >= 1 || <= 3 where its own comment says &&
- CalibrationWizardPresetPage.cpp left max_decimal_length unset through a
pair of conditions that cover every value but not visibly so
- DevManager.cpp bound map elements to pair<K, V> rather than
pair<const K, V>, copying every one
- SyncAmsInfoDialog.cpp had extraneous parentheses around a comparison
- Http.cpp had if (speed > 0.01) speed = speed;. speed now starts at 0 as
well, because curl_easy_getinfo leaves the target untouched when it fails
and the value reaches Progress either way
- SnapmakerPrinterAgent.cpp truncated npos into an unsigned int, so the
!= npos guard was always true. A colour with no # still yields 0, because
the wrap produced 0 as well
Nine categories go to zero. -Wtautological-overlap-compare and
-Wsometimes-uninitialized reach zero when #15583 merges their second site.
Ian Chua