filament_minimal_purge_on_wipe_tower became variant-keyed upstream, which
invalidated the comment claiming none of full_config's keys were.
WipeTower2::extract_wipe_volumes indexes it by raw filament slot. Not reachable
with shipped presets; noted rather than worked around.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Addresses the interface notes on the IDEX/IQEX modes editor.
Add Mode moves from below the rows to the top of the panel, beside a "?" button
that now carries the overview text as its tooltip. At the bottom the button
shifted down the page every time a mode was added, so where it sat depended on
how many modes already existed. It is an Orca Button in the Confirm style, width
matched to the mode column it creates a row in, and the panel opens on the
legend rather than on a paragraph.
Remove moves out of the right-hand column, where it sat one icon away from
Edit -- a destructive control beside the one pressed most -- to under the name
field it deletes, and its icon becomes a boxed minus rather than an X, which
read as "close". Reset joins Edit in the right-hand column, which is now
top-aligned so the icons hold position regardless of row height. Tool tiles are
square at 24px, and the header spacer tracks that width so the column titles
stay over their columns when the grid changes shape.
The two text fields were landing on GTK's near-black default border, invisible
against the panel: measured 45,45,49 against a 43,43,43 background, where the
settings fields above use 74,74,81. wxTextCtrl cannot color its own border, so
each sits in a one pixel frame taking the color TextInput derives for the
theme, and carries wxBORDER_NONE so Windows and macOS do not draw a native edge
inside it. The G-code boxes also take the monospace face EditGCodeDialog uses.
Bed zone fills drop to roughly half opacity in the Standard theme. They cover
whole quadrants for a whole session, so at swatch saturation they dominate the
scene. The collision strip is dimmed less, since it marks where a head hits
something. The deuteranopia, tritanopia and high contrast themes keep their
alphas: those are chosen for discriminability, which is the opposite trade.
Also fixes the icon size never applying. All four ScalableButton call sites
passed eight arguments, so the size bound to use_default_disabled_bitmap and
bmp_px_cnt kept its default of 16. Both are passed now.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A plate can carry its own parallel mode, or leave it on Primary and inherit the
process preset's. set_imex_mode() erases the key on Primary precisely so the
preset's value survives the config merge, and the slicer honors it: Print::validate()
and the G-code path both read the merged object config, so such a plate slices, and
emits, in the preset's mode.
Three places that describe that plate did not resolve it the same way. They read
the plate's own value and stopped, so on a plate left at Primary:
the multi-material conflict badge stayed dark on a plate validate() will refuse,
which is the one invariant the comment above it claims to keep;
the bed-temperature and filament-type warnings never ran, so the job went out in
copy or mirror with a mismatched bed and no notice;
the plate tooltip reported Primary for a plate about to print in another mode.
The geometric badge beside the first of those already resolved correctly, because
it goes through the zone layout, so one badge fired while its neighbour stayed
dark on the same plate.
The fallback had been written out by hand four times. Three are now collapsed onto
one accessor, get_effective_imex_mode(); the fourth is in libslic3r, which cannot
call a GUI method and resolves the two modes itself from arguments. The remaining
callers of the raw get_imex_mode() want the raw value and keep it: the accessor
itself, the zone layout call that passes both modes separately, the mode menu and
the left-click cycle, which act on what the plate stores, and the reset that looks
for plates whose own mode was removed.
The tooltip is the one place the two readings meet. It headlines the stored mode,
because it sits on the button whose menu and click act on that value, and names
the inherited mode after it when they differ -- so one control no longer says
three different things while still telling the user what will actually print.
Reachability, honestly: nothing in the UI writes the process preset's copy today,
so this needs a hand-edited preset, a vendor process profile or a project that
carries one. It is latent rather than live -- and it stops being latent the moment
a process-level mode selector exists. Note the key lives in the process preset, so
one value there would govern every Primary plate in every project using it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The two conflicts are both places where upstream landed on top of IDEX/IQEX
code. In GCode.cpp the relocated file header block meets the IMEX placeholder
block, and the placeholders are set first: file_start_gcode is processed through
the placeholder parser now, which throws on a name it does not know, so a script
naming {imex_mode} would abort the export if the header ran first. In
test_multifilament.cpp both sides appended a case at the end of the file.
A coEnum config value has two representations: the typed ConfigOptionEnum<T> a
config cloned from the static classes carries, and the ConfigOptionEnumGeneric
that a config assembled from the option definitions creates - which is what a
preset, a project's own settings and the CLI all hold. imex_cfg_enum() accepted
only the first, so every IDEX/IQEX reader took the option default instead: a
printer saved as rear-left came back front-left in the settings, the bed zones
and the carriage markers, while the preset on disk still held rear-left.
Read the generic form too, keyed on the value map it carries, since only T's own
map yields a T. The last reader that matched on the coEnum tag alone and cast
across the two hierarchies now goes through the helper with everything else.
Declaring the three keys the static classes were missing is what lets a change
to imex_tool_layout invalidate the slice it moves, which it never did before.
The two that are only ever drawn stay out of that: a colour scheme and the
advisory margin bands do not reach a slice, so changing one must not discard it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
set_hover_tooltip records one string per frame, so the multi-material warning
replaced the mode tooltip instead of joining it, and hovering the icon on a
conflicted plate no longer said which mode was active or that clicking cycles
it. The two are composed into one string, paragraph separated.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The estimate no longer reports a tower for a single filament whose flush matrix
purges, so the comments that justify calling prime_tower_is_printed() instead of
reading a depth now cite what still holds: it reads neither enable_prime_tower
nor print_sequence. GCodeViewer's comments name render_scene(), the function
that replaced the render() they still pointed at, and the pass contract mentions
the toolhead boxes it draws.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The merge of upstream main (dc021c6ef6) resolved the GCodeViewer.cpp conflict
from #15674 by keeping both sides. That left a stray `}` in
SequentialView::render_overlay, so the file no longer compiles. It also kept
the IMEX carriage update and the toolhead-box GL draw in the ImGui overlay
pass, which #15674 no longer uses for 3D geometry.
The carriage update and the toolhead boxes now run in render_scene next to the
primary marker, and render_marker draws the secondary markers. render_overlay
goes back to what upstream has, without the duplicated marker-position block
and the unused bottom_margin the merge left behind.
The same upstream change renamed PartPlate::show_tooltip to set_hover_tooltip;
the two IMEX call sites follow it.
Four files overlapped, and each resolution favours upstream where the two sides
had done the same work:
WipeTower's M104/M109 tool qualifier. Both sides bounds-checked the physical
extruder map lookup; upstream omits the T qualifier when the map cannot answer,
where this branch fell back to the logical index and so named a carriage that may
not be the one printing. Upstream's behaviour is what this branch documents
elsewhere, so its version is taken and the local helper is dropped.
get_extruders' mixed-slot switch. Upstream added the same concept to the CLI
overload as expand_mixed_slots, so the GUI overloads' parameter is renamed to
match rather than carrying two names for one idea.
GLCanvas3D's sequential-clearance branch gains upstream's
update_compacted_wipe_tower_clearance for the by-layer case.
The printer_agent re-sync in TabPrinter::reload_config was upstream's and their
preset-undo fix removed it, so it goes; the IMEX modes grid re-sync beside it
stays, since it spans three options and is not a Field.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
imex_wipe_tower_hull() open-coded "does this plate print a tower?" as one
filament and no forcing reason. normalize_fdm_2, which is what actually
clears enable_prime_tower before slicing, has a second arm the copy omitted,
and reads the mixed-filament flag project-wide where the copy read the
plate. Two cases went wrong in opposite directions.
A ByObject plate with several objects prints no tower and the scene draws
none, yet the copy validated one and could refuse the slice with "the prime
tower overlaps an area reserved for IDEX/IQEX parallel printing" - with
nothing on screen to move.
A plate using one plain slot while some other slot in the project is a blend
does print a tower, because normalize_fdm_2 keeps it for any mixed filament
in the project, and the copy skipped validation entirely, so the tower could
be placed in a carriage zone and sliced.
prime_tower_is_printed() in libslic3r states the rule once, and both the
gate and a test use it. The counts are the ones normalize_fdm_2 is handed:
filament slots as authored, so a mixed slot counts once, and distinct
objects rather than instances. filament_is_mixed is a project option, so it
is passed in rather than read from the print preset.
The test drives every combination the rule looks at and compares the verdict
against normalize_fdm_2 itself, so the two cannot drift again without
failing.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The block describing what imex_wipe_tower_hull() does and does not cover had
drifted. It named estimate_wipe_tower_size, which upstream replaced with
estimate_wipe_tower_footprint; it described the plate filament count as an
override where the rewritten estimate treats it as a floor; and it
documented a Type2 stabilization cone as unhandled when the estimate now
folds the cone's worst-axis bulge into the margin the hull is built from, so
a second allowance would double-count. The comment on the m_print arm of the
guard now says what that arm actually does, which is nothing, since the
estimate stopped reading m_print.
It also records why the gate takes "is a tower printed" from
normalize_fdm_2's rule rather than from the estimate: the estimate reports a
tower for a single filament whenever the flush matrix purges, which would
hard-block a plate whose tower normalize_fdm_2 had already cleared, with
nothing drawn on screen to move.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Review findings on the IDEX/IQEX parallel printing code, all in paths the
feature owns.
- physical_extruder_map lookups used ConfigOptionVector::get_at(), which
clamps an out-of-range index to values.front() rather than reporting a
miss. The map holds one entry per nozzle while filament ids index slots,
and nothing caps the slot count at the nozzle count, so a project authored
with more filaments than the printer has extruders silently addressed the
primary's head: pressure advance pinned to the wrong carriage, and
skip-primary loops suppressing whichever head sat at pem[0]. Bounds-check
at all four sites and treat the miss as "no mapping" (-1). Covered by a new
imex_pem_tool_for test; the header note now warns against get_at here.
- IMEXFilamentPickerPopover leaked a top-level window per ghost click:
wxPopupTransientWindow::Dismiss() only hides, and never reaches OnDismiss().
Destroy from an OnDismiss() override and dismiss the picker through
DismissAndNotify(), which is the path a successful pick takes.
- ArrangeJob read PartPlate's IMEX zone cache from the worker thread, where
a cache miss rebuilds GLModel members with no GL context current while the
GUI thread may be painting them. Snapshot the zones in prepare(), on the
main thread, already converted to plate-local coordinates.
- The mode grid anchored its row window to the Primary's gantry row. A window
as tall as the grid can only start at row 0, so this drew tiles for tools
that do not exist and hid real ones. Render the whole grid instead; a
Primary outside it is a data problem the zone layout already reports.
- Build the mode tooltip from one format string rather than two catalog
fragments concatenated around a runtime value, so translators can move the
mode name within the sentence, and register IMEXModesCtrl.cpp for string
extraction.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A valid mixed filament already slices the same on the CLI as in the GUI;
these are the places where the CLI still skipped a rule the GUI applies.
- Keep the prime tower when a mixed filament is used, even if every
--load-filaments preset is the same. A mixed filament swaps between its
components every layer, so turning the tower off left the swaps with
nothing to purge on.
- Leave a mixed slot's row and column of the flush matrix at zero when
--filament-colour triggers a recompute, as the GUI does; a mixed slot
never reaches a nozzle.
- Refuse a mixed slot that has no filament of its own. Feature filament
ids aimed at it were past the filament count, got reset to filament 1
and the model silently printed in one colour.
- Refuse a plate that uses a mixed filament whose components are
different filament types, the type half of the GUI's
Sidebar::has_broken_mixed_filament. Missing or out-of-range components
are already rejected for the whole project by validate().
get_extruders_under_cli gains an expand_mixed_slots flag so the gate
can see mixed slots rather than their components; existing callers
keep the expanded list.
Both refusals exit with the new CLI_MIXED_FILAMENT_INVALID (-69).
# Description
Each plate keeps a registry of the instances it holds
(`PartPlate::obj_to_instance_set`). The plate's filament list
(`get_extruders`), its wipe tower preview and position clamp, the object
list grouping and the saved project's per-plate instance list all read
it. Two paths left it stale:
* `Plater::increase_instances` (the `+` key / toolbar) adds the copy to
the model but never registers it with any plate.
* `GLCanvas3D::do_move` (drag release and arrow keys) ended with
`notify_instance_update(-1, 0)`, so only instance 0 of each selected
object was re-registered. Rotate, scale and mirror already notify every
instance.
So a copy created with `+` and dragged onto another plate stayed unknown
to that plate: the project saved afterwards listed it on no plate, and a
multi-filament copy moved onto a single-filament plate drew no wipe
tower there and never got its tower position clamped. The Print side
selects instances by geometry, so the plate still sliced, which is why
this went unnoticed.
This PR
* registers new copies with their plate at creation;
* has `do_move` notify exactly the instances it moved (every instance of
the object when a part was moved in Volume mode), rather than instance 0
or all instances - notifying an instance that stayed put invalidates its
plate's slice result, so `(-1, -1)` as used by rotate would have
un-sliced every plate holding a sibling copy;
* drops the registry entry again when `decrease_instances` removes a
copy.
A second commit finishes the switch #15532 started with
`contain_any_instance_totally()`: `get_extruders_without_support()`,
`check_single_extruder_mixed_filament_risk()` and
`check_compatible_of_nozzle_and_filament()` still tested instance 0
only, so an object whose copy - not its original - sits on the plate was
skipped by all three.
No new options, no format change. The `is_new` flag is deliberately not
passed for the copies: a copy landing on a spiral-vase plate gets the
same "apply spiral mode settings?" prompt a dragged instance gets,
instead of a silent rewrite of the object's settings.
# Screenshots/Recordings/Graphs
Before:
<img width="1920" height="1080" alt="05-moved"
src="https://github.com/user-attachments/assets/3cf9f5a9-1a4e-41e8-8c57-578f849d8c29"
/>
After:
<img width="1920" height="1080" alt="05-moved"
src="https://github.com/user-attachments/assets/1b801a7e-b7cd-4ffb-bd1d-b701f90dade6"
/>
## Tests
Re-run after the rebase, both binaries driven through the same headless
harness (Xvfb 1920x1080, llvmpipe) on the same fixture: `cubeA`
(filament 1) alone on plate 1, `cubeB` (a two-part object, filaments 2
and 1) alone on plate 2, so plate 1 shows no wipe tower at load. Select
the plate-2 object, press `+`, walk the copy onto plate 1 with 36 x Left
(10 mm per press, one `do_move` each), save, slice plate 1.
Before is main `8af92214d0` - i.e. with #15532's
`contain_any_instance_totally()` already in place, so the only
difference is this PR.
* **Before:** the saved `model_settings.config` lists plate 1 with
`cubeA` only and plate 2 with `cubeB` instance 0. The copy (instance 1)
is listed **on no plate at all**, and plate 1 draws no wipe tower even
though a two-filament object is sitting on it.
* **After:** plate 1 lists `cubeA` **and** `cubeB` instance 1; plate 2
still lists instance 0. The plate-1 tower preview appears, and slicing
plate 1 succeeds with the tower actually generated - the filament panel
reports 1.10 m / 0.48 m in its Tower column over 51 filament changes,
and the G-code carries `EXCLUDE_OBJECT_END NAME=cubeB.stl_id_1_copy_0`.
Same camera and fixture on both runs, so the screenshots above are
directly comparable.
* build: clear 2 warnings - cast the NSTextField the class check already proved
mainframe_text_field is NSTextField* and was assigned a bare NSView*, which
Clang reports as -Wincompatible-pointer-types. Both assignments sit inside
if ([viewObject class] == [NSTextField self]), so the runtime type is already
guaranteed, and the line above the second one casts the same variable the same
way to call setTextColor. macOS only, since nothing else compiles this file.
* build: clear 6 warning categories from the clang-cl inventory
-Wmissing-braces (9). Aggregates whose first member is itself an aggregate.
GUID's fourth member is BYTE[8], so the trailing eight bytes take their own
braces. The others were reaching for zero-initialization with {0} and say {}
now. bbs_3mf's backup Task ends in an anonymous union, which needs braces of
its own; those braces initialize the union's first member rather than the one
named at the call site, so the RemoveBackup site says so in a comment.
-Wmacro-redefined (11). SendMultiMachinePage.hpp defines five names that
Preferences.hpp, PresetBundleDialog.hpp, ExportPresetBundleDialog.hpp and
TroubleshootDialog.hpp also define with different values, so the value in
force depended on include order. All nine of this file's DESIGN_ macros take
the SEND_ prefix it already uses for its own macros, values unchanged, so a
DESIGN_ name added elsewhere later cannot collide with it again. They read as
one page-local palette, a 900 to 400 gray ramp plus sizes, so the four with
no current readers stay: dropping them would leave gaps in a named scale. test_marchingsquares.cpp defines NOMINMAX,
which libslic3r already passes as a PUBLIC compile definition, so it takes
the #ifndef guard the other suites use.
-Wbraced-scalar-init (3). Two PushStyleVar calls resolve to the float
overload, so the braces were initializing a scalar. ConfigOptionFloatsNullable
already takes an initializer_list, so the inner braces did the same thing.
-Wmicrosoft-goto (2). Both gotos in copy_file_gui jump forward over the
initialization of size, dwRead and dwWrite, which only MSVC accepts. Those
declarations move up to join the others at the top of the function.
-Wunused-private-field (3). Every use of ColourPicker's m_clrData and
m_picker_widget is behind !defined(__linux__), so on Linux they are written
and never read; the members now carry the same guard. ParamsPanel's
m_size_move is read nowhere. Tab has its own, which is the one Tab.cpp uses.
-Wnonportable-include-path (2). BaseException.h asked for "stackwalker.h"
and the file on disk is StackWalker.h.
get_extruders() and estimate_wipe_tower_size() already ask whether any
instance of an object sits on the plate; the support-less extruder scan, the
mixed-filament risk check and the nozzle/filament compatibility check still
tested instance 0 only, so an object whose copy - not its original - was
placed on the plate was skipped by all three.
The preview brim, the placement margin and the pre-generation validation
warning each decided on their own whether the tower has a Type2 cone
base, reading the wall type and cone angle three different ways. The
preview's read cast the preset's enum to ConfigOptionEnum<T>, which a
preset-shaped config never holds, so the cone base was never previewed.
estimate_wipe_tower_first_layer_outline now answers that question once,
beside the footprint estimate, from the config and the resolved planner;
all three sites take the outline from it. The libslic3r case reads the
outline off a preset-shaped config, where the old cast came back empty.
Smooth timelapse no longer charges a prime volume it does not purge. A
tower printed with no tool change is exactly the idle depth: the
stability minimum for Type2, the wrapping detection depth for Type1.
Charging a full prime_volume on top made the previewed and arranged
tower deeper than the one that is printed.
The Type2 half of "a tool change reserves a tower whatever the purge
volumes resolve to" arrives with the base commit; here it only has to
survive the planner split, since Type1 already reserves per filament.
The wipe tower filament only joins the tool ordering when there is a
tower to join, which is the has_wipe_tower() half of the guard
Print::extruders applies.
The shared estimate reserved every tower with one volume-per-purge rule
and the stability floor. Both planners do more: WipeTower (Type1) wipes
each filament's own prime volume in whole lines, one block per
adhesiveness category sized by its worst layer, rams the leaving
filament at every nozzle change, and squares a rib tower from the
planned depth; WipeTower2 (Type2) spaces its lines by
wipe_tower_extra_spacing, not the Type1-only infill gap, and its extra
flow cancels out of the depth. Both extend the ribs rather than the body
below the stability minimum, size every layer including a thinner first
one, and lay the brim in whole loops, WipeTower reporting half a spacing
of line width on top.
All of that now lives in estimate_wipe_tower_footprint, fed the planner
(resolve_wipe_tower_type mirrors Print::wipe_tower_type and the CLI's
Bambu Lab detection) and the filament ids rather than a count. Print
passes its own tool set; the PartPlate adapter derives the plate's ids
from the passed config and treats an explicit count as a floor, so the
CLI's count-only callers size per filament too. The placement clamp also
reserves a Type2 cone's base bulge, which the body box does not cover.
The planner-mirroring helpers sit beside the planners in WipeTower and
WipeTower2 so the two stay in sync; the libslic3r cases pin them to
footprints measured from generated G-code.
A raft is not a reason to reserve a tower. Print::apply runs
normalize_fdm_2, which clears enable_prime_tower for a plate that purges
one filament unless smooth timelapse or wrapping detection is on, so a
single-filament plate with a raft prints no tower at all and the estimate
was reserving bed area for one. Drop the input; need_wipe_tower is now
exactly the two exceptions normalize_fdm_2 honours, named there so the
next reason added has to be checked against it.
The GUI preview and the validation containment check each re-derived
"is a tower printed here" from the filament count instead of reading the
estimate, so both missed the towers printed with no tool change to purge
for. They now take the answer from the footprint, which is the drift this
shared estimate exists to remove. A tower that is not printed estimates to
zero, so its hull is degenerate and every check on it passes trivially -
the containment check needs no gate of its own.
WipeTowerData::width was written only by the pre-generation estimate and
left at zero for the whole post-generation life of the Print, while its
neighbour depth held the real value. Set it from the generator in both
branches.
The plate's height scan transformed every model part's full mesh per
instance on each scene reload, discarding all but the z extent. The
cached convex hull has the same z extent.
A plate loaded from a sliced .gcode.3mf holds no objects and its filaments
live in slice_filaments_info; the config-taking get_extruders overload
returned an empty list for it, which sized the tower for a placeholder two
filaments. It now answers the way the wx overload does, without reaching
the plater.
Also drop estimate_wipe_tower_size, which has no callers.
Five sites carried a hardcoded fallback for imex_tools_per_gantry that had
to match the value registered in print_config_def, with nothing enforcing
the agreement, and several explanatory comments miscounted the sites they
described or cited stale line numbers.
Add imex_cfg_int/_float/_bool/_enum<T> to IMEXHelpers, which return the
value registered for the key when it is absent from the config, so the
registration is the single source and there is nothing left to keep in
sync. Route every read of the IMEX geometry keys through them: 32 call
sites across IMEXZones, PartPlate, GCodeViewer and Tab. The only direct
lookup left is the bail in PartPlate::imex_multicolor_block_reason, which
must not default because it reports a routing conflict and a defaulted
grid would produce a false warning.
imex_cfg_enum uses dynamic_cast on both halves rather than the type()
comparison the others use: every ConfigOptionEnum<T> reports coEnum, so a
type() check cannot tell one enum type from another and would cast a
ConfigOptionEnum<OtherEnum> to the requested T. The ConfigOptionPercent :
ConfigOptionFloat inheritance that rules dynamic_cast out for the float
accessor has no analogue for enums.
Correct the comments that prompted this: the cache-key input list in
PartPlate named five inputs for a nine-part key, the ImexMarkerKey note
in GCodeViewer called imex_tool_layout an input only the preview reads
when the plate keys it too, and four file:line citations pointed at the
wrong lines. Values are unchanged at every converted site; cache key
strings keep their existing representation.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Fix incorrect early exit for CLI mode no-support preventing parameters from being read
* Use PartPlate's m_height to allow CLI to perform proper BuildVolume check
* Add safeguard against extruder_pintable_heights and extruder_areas vector size mismatch
* Preserve printable_height precision in PartPlate/PartPlateList
* Fixed multiple BuildVolume warning issue, and keep check_outside diff minimal
No IMEX code upstream, so nothing in this merge touches the feature. All 21 overlapping
files auto-resolved; verified every upstream addition is present in the merged tree.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Closes review comment 10.
`461c69c83e` settled this in April — IMEX internally, IDEX/IQEX as the user-facing label — but the
UI strings were never converted. Every translated string naming the feature now reads IDEX/IQEX:
41 occurrences across the printer and process option labels and tooltips, the modes editor, the
plate mode indicator, the pre-slice warnings, the placement refusals and the slicing errors. The
reviewer listed eight; the rest were in the same class.
Nothing else moves. The config keys keep the `imex_` spelling — `is_imex`, `imex_mode_names`,
`imex_parallel_mode` and the rest are on-disk format in existing printer presets and 3MF projects,
so renaming them would break every profile and project already saved. C++ identifiers, filenames,
comments and test names keep IMEX as well: it stays the internal name of the subsystem, which is
what covers the topology space (one gantry with 2-4 tools, 2x1 and 2x2 grids) that neither acronym
names on its own. Where a tooltip quotes a key, the key spelling is preserved and only the feature
word around it changed.
The `is_imex` tooltip is reworded rather than substituted: it already named the hardware families
parenthetically, so a literal replacement would have said IDEX/IQEX twice in one sentence.
No translation impact — no IMEX string had reached OrcaSlicer.pot or any catalogue, so there is
nothing to migrate. One test asserted on the old error text and now matches the new one.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
calc_imex_zones() is now 69 lines: fetch the two edited configs, call
compute_imex_zone_layout(), store the result, and clip each returned rect to the
bed outline to build the GLModels. That last step is the only part that needs GUI
types, which is why it stayed. See the extraction commit for the behaviour-
preservation evidence.
refresh_imex_slice_offset() is deleted along with its call in
update_slice_context(); the offset is derived in the engine now, and it was
computing it in the plate-list world frame, which double-counted the plate origin
for every plate after the first.
Two smaller changes:
- The zone/ghost cache key omitted imex_tool_layout, which decides which physical
corner tool 0 occupies and therefore moves every zone rectangle, collision strip
and ghost offset while every other keyed field stays put. A layout change
produced an identical key. That this currently appears to work is incidental --
some other path happens to rebuild -- and not something to depend on. Found by
building the preview's own cache key against this one.
- The tools-per-gantry fallback for a missing key was 1 in two places where
PrintConfig registers 2 and the zone code uses 2. All four sites now agree; a
missing key otherwise grouped tools against a grid divided a different way.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
PartPlate::store_to_3mf_structure read first_layer_time from the indirect cali_bboxes_data struct,
which the GUI populates at Plater.cpp:10600 but the CLI never writes to. The result was uninitialized
memory leaking into slice_info.config
Read directly from get_slice_result()->initial_layer_time, which is populated by
GCodeProcessor::finalize() in both code paths and matches the pattern already used a few lines
above for gcode_prediction.
Also default-initialize PlateBBoxData::first_layer_time to 0.0f as a defense against any other consumer
reading it without an explicit write.
The badge is meant to predict whether slicing will be refused, and it delegates
to the same helper for that reason. It was feeding that helper a different
filament list. get_extruders(true) resolves a mixed slot into its physical
components -- right for AMS mapping, which has to know what is actually loaded
-- while Print::validate counts the slot itself.
So a plate holding one two-component blend reads as two filaments to the badge
and one to validate. The badge sees two, decides the plate is fine, and stays
silent; the slice is then refused. It also runs the other way: a plate the user
sees as a single colour draws a multi-material warning, because the expansion
made it look like two.
Give get_extruders an expand_mixed flag, defaulted so every existing caller
keeps the resolved list, and have the badge ask for the authored one.
The badge was also only mirroring validate's multi-color rule, not its first
one -- a mixed filament is unsupported in a parallel mode outright. Without it
the badge stays quiet on exactly the plate validate refuses first.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Brings the upstream color-mixing feature and its follow-ups onto the branch so the
IMEX placement and primary-routing checks are built and tested against them for the
first time.
Merged clean, no conflicts. Not yet exercised together: a mixed filament is a virtual
slot no nozzle carries, while physical_extruder_map routes logical slots to physical
heads, so the IMEX pem lookups have no defined answer for one. Print::extruders()
lists mixed slots under their own id while tool_ordering.all_extruders() lists them
post-expansion, and the IMEX code reads both.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Brings in 54 upstream commits, the bulk of them the BambuStudio-ported color
mixing / mixed filament subsystem (#15347) plus its follow-ups, along with the
Assimp-backed colored OBJ import, warning-policy build changes, and assorted
profile and localization updates.
Two conflicts, both "each side added at the same point", resolved by keeping
both:
- Print::validate() -- our IMEX multi-color block and upstream's new gradient
mixed filament warning were inserted at the same spot after the empty
extruders check. They test unrelated conditions, so both are kept, each with
its own closing brace.
- tests/libslic3r/test_3mf.cpp -- our three IMEX per-plate round-trip scenarios
and upstream's mixed-filament round-trip scenario both append to the end of
the file, and each side added one include. All four scenarios and both
includes are kept.
Everything else merged cleanly, including GCode.cpp, ToolOrdering.cpp,
PartPlate.cpp and PrintConfig.cpp. Upstream left the is_extruder_used block
untouched, so the IMEX supplement still applies, and estimate_wipe_tower_polygon
is unchanged, so the prime tower hull work is unaffected.
Not addressed here, and worth its own change: a mixed filament is a virtual slot
that no nozzle carries, while physical_extruder_map routes logical slots to
physical heads. Print::extruders() lists mixed slots under their own id whereas
tool_ordering.all_extruders() lists them post-expansion, so the IMEX pem lookups
have no defined answer for a mixed slot. Upstream's own guards reject a mixed
filament where a physical slot is required; IMEX likely wants the same.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
# Description
This PR ports the color mixing feature from BambuStudio.
The port is based on the previous work by @ianalexis in #15231.
This PR completes the port and fixes various bugs.
Several improvements were also made during the porting process.
WIP
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
