stl_stats are newly only accessed by TriangleMesh::stats(),
most of the direct access to TriangleMesh::stl is gone with the exception
of parsing input files (3MF, AMF, obj).
Sometimes Clipper produces a polyline with more than 2 points when
clipping a line with a polygon or a set of polygons. We hope the intermediate
points are collinear with the line, so we may just ignore them.
Exporting G-code on a worker thread did not work correctly as the worker
threads were using user's locale, not "C" locale.
The "C" locale is newly enforced to TBB worker threads by
name_tbb_thread_pool_threads_set_locale()
WIP to G-code export parallelization through pipelining:
Decoupled CoolingBuffer from GCode / GCodeWriter, ready to be
pipelined on a different thread.
WIP to G-code export parallelization through pipelining:
GCodeProcessor is called during the G-code export,
the G-code is no more reopened and re-read, but it is pipelined
from the G-code generator.
GCodeViewer no more parses G-code just to extract line end positions.
Removed start_mapping_gcode_window(), void stop_mapping_gcode_window(),
they are no more needed.
This is a regression to a late PrusaSlicer 2.4.0-alpha0 change
8dfc0422a8
Faster and hopefully more reliable projection of paint-on support
blockers and enforcers on a sliced mesh.
Previous d89f01c717 did not fix it.
This is a regression to a late PrusaSlicer 2.4.0-alpha0 change
8dfc0422a8
Faster and hopefully more reliable projection of paint-on support
blockers and enforcers on a sliced mesh.
1) Activate installed filament or SLA material profile after update_compatible(),
so that the compatiblity and visibility flags of presets are updated.
2) Only activate the first newly installed filament / SLA material profile
if the active printer did not change. This also means that if no filament
profile was active before Wizard was open or it became incompatible with
the newly installed Printer profile, the default filament profile assigned
to the activated Printer is activated preferably, which may or may not
be one of the newly installed filament profiles.
object layer over raft interface:
"first_layer_speed_over_raft", "first_layer_acceleration_over_raft".
Fixes I have a question about the speed of the first layer after the raft. #6623
Fixes Layer After Raft Is Not Considered First Layer! #6166
1) Changed the name of the variable "brim_offset" to "brim_separation"
for clarity.
2) Added legacy conversion after loading an old 3MF that does not define
then new "brim_separation" variable: The "brim_separation" is being
filled in with the "elefant_foot_compensation" value to produce
equal brim separation to the old PrusaSlicer that saved that 3MF file.
The triangle-ray intersection function used a hard coded epsilon,
which did not work for triangle meshes, that were either too small
or too large. Newly the epsilon may be provided to the AABBTreeIndirect
search functions externally and IndexedMesh calculates a suitable
epsilon on demand from an average triangle mesh edge length.
6b03b66167
Renamed the new "printhost_ignore_check" option to "printhost_ssl_ignore_revoke"
Improved the Physical Printers dialog in regard to the new option checkbox
(added tooltip to the checkbox, moved it to the end of options).
Disabled the host_xxx options at the command line interface, they no
more work after these options were separated to Physical Printers profiles.
Little refactoring of Http.cpp/hpp, OctoPrint.cpp/hpp
Private local variables prefixed with m_, some renaming for clarity.
list of modified options.
Optimization of DynamicConfig::equals(), ::diff(), ::equal()
to iterate over the two compared std::map trees instead of
first generating a list of keys and then searching for each key
in the respective map.
Optimization of PresetCollection::current_is_dirty() and ::saved_is_dirty()
to call DynamicConfig::equals() instead of ::diff().
of a printer from MMU to non-MMU (when number of extruders changes).
Also slightly optimized in case a MMU-painted object is sliced in
single extruder mode.
In case the configuration snapshot cannot be taken before installing
configuration updates (because the current configuration state
is invalid), ask user whether to continue or abort.
1) Slic3r::RuntimeError was replaced with ConfigurationError,
all exceptions thrown by the configuration layer are derived
from ConfigurationError.
2) When parsing configuration files, ConfigurationError is catched and
rethrown extended with the file name being parsed.
1) Starting with this commit, configuration block exported into G-code
is delimited by "; prusaslicer_config = begin" and "; prusaslicer_config = end".
These delimiters look like any other key / value configuration pairs
on purpose to be compatible with older PrusaSlicer config parsing from G-code.
2) Config parser from G-code newly searches for "; generated by ..."
comment over the complete G-code, thus it is compatible with various
post processing scripts extending the G-code at the start.
3) Config parser from G-code parses PrusaSlicer version from
the "; generated by PrusaSlicer ...." header and if the G-code was
generated by PrusaSlicer 2.4.0-alpha0 and newer, it expects that
the G-code already contains the "; prusaslicer_config = begin / end"
tags and it relies on these tags to extract configuration.
4) A new simple and robust parser was written for reading project configuration
from 3MF / AMF, while a heuristic parser to read config from G-code located
at the end of the G-code file was used before.
1) New environment variable SLIC3R_PP_HOST contains one of
"File", "PrusaLink", "Repetier", "SL1Host", "OctoPrint", "FlashAir", "Duet", "AstroBox" ...
2) New environment variable SLIC3R_PP_OUTPUT_NAME contains the name
of the G-code file including path (for SLIC3R_PP_HOST == "File")
or a name of the file after upload to the host (PrusaLink, Octoprint ...)
3) The post-processing script may suggest a new output file name
(likely based on SLIC3R_PP_OUTPUT_NAME) by saving it as a single line
into a new "output name" temp file. The "output name" file name is
created by suffixing the input G-code file name with ".output_name".
Please note that the G-code viewer visualizes G-code before post-processing.
Fixes Broken PostProcessing when script changes out-filename #6042
Make is_converted_from_meters / is_converted_from_inches exclusive-or.
Maybe it would be better to make a single enum from the two booleans,
if they are exclusive-or?
1) Polished up wording of the error messages.
2) Made some messages in the SysInfo dialog localized.
3) Renamed LibraryCheck.cpp/hpp to BlacklistedLibraryCheck.cpp/hpp
4) CPPized the BlacklistedLibraryCheck WIN32 C code.
string or an UTF-8 string. Let's convert it to wxString before
showing an error message box.
boost::system shall return UTF-8 localized error messages as long
as we set -DBOOST_SYSTEM_USE_UTF8 in the top most CMakeFiles.txt,
which we do.
Vojtech Bubnik