The Filament Track Switch (H2-series accessory, product code O2L-FTS) feeds
every AMS to both extruders through a two-track switch. Port full support
across the device layer, project config, and GUI.
Device / config:
- Model the switch-aware AMS binding (the set of extruders an AMS can feed
and which input track A/B feeds it), switch readiness, the O2L-FTS firmware
module, and the fun2 capability bit for checking a slice against installed
hardware.
- Register has_filament_switcher and enable_filament_dynamic_map as project
config that persists with the project and restores from a saved 3mf, and
force both back to false on every project/printer/CLI load path. Live
device sync is the only thing that sets them true.
GUI:
- Sidebar sync activates the switch from live device state, attributes each
AMS to the extruder its input track feeds, shows a floating status icon
(ready / not-calibrated), and surfaces a one-time tip / not-calibrated
warning.
- Send dialog gains a non-blocking slice-vs-hardware mismatch warning and a
blocking error when a slice needs dynamic nozzle mapping but the switch is
missing or not set up.
- AMS load/unload guards, AMS-view routing glyph + un-calibrated banner +
hidden external-spool road, and mapping-popup external-spool lockout.
- Filament pickers collapse the per-extruder split into a single deduplicated
"AMS filaments" group with a smart-assign toggle when the switch is ready.
- Firmware-upgrade panel lists the O2L-FTS accessory and its version.
- Device-provided filament-change steps (ams.cfs) drive the change-step
display when firmware sends them, including the three switch steps.
- "Load current filament" asks which extruder to feed via a
FeedDirectionDialog when the switch is calibrated.
Inert without the accessory: every path is gated on the switch being
installed (MQTT aux bit 29, default off) or ready, both project flags default
false, and the per-extruder AMS attribution is byte-identical, so AMS state,
the send/load UI, and sliced g-code are unchanged for every printer that does
not report a Filament Track Switch.
* fix: out-of-bounds read computing tool-ordering max layer height
calc_max_layer_height() loops over the extruder count (nozzle_diameter)
but indexes max_layer_height with the same counter, reading past the end
when that array is shorter. Silent on release builds, aborts under a
bounds-checked STL (_GLIBCXX_ASSERTIONS).
Read via get_at(), which falls back to the first entry when the index is
out of range, as Slicing.cpp already does for this option.
Add a fff_print regression test slicing a two-extruder printer with a
single-entry max_layer_height.
* docs: clarify how max_layer_height ends up short in the regression test
Normalization sizes it to the filament count under single_extruder_multi_material,
not "a mismatch a profile can ship" as the earlier comment guessed.
round() already had unit coverage; floor() and ceil() had none. Add the missing
positive cases for both signs, plus round()'s half-away-from-zero tie-break, and
one negative case asserting that a name outside the grammar's built-in function
set is treated as an undefined variable and throws, rather than being passed
through to a math library.
GCode::extrude_support declared its per-path speed helper as a function-local
static lambda that captures `this` by reference. The closure is built once, on
the first extrude_support call, and reused for the rest of the process, so a
second G-code export in the same process runs the helper against a `this` from
the first export's stack frame, which has already returned.
The stale `this` flows through NOZZLE_CONFIG(...) -> cur_extruder_index() ->
GCodeWriter::filament(), reading a garbage current-extruder id and indexing
with it. It is silent whenever the reused stack still holds a usable pointer,
and an order-dependent SIGSEGV otherwise; AddressSanitizer reports it as a
stack-use-after-return in GCodeWriter::filament(). It is the only static
capturing lambda in libslic3r.
Drop static so the closure is rebuilt each call against the live frame. Add an
fff_print regression test that slices a support object twice in one process; it
fails without the fix (stack-use-after-return under ASan) and passes with it.
Multi-nozzle sync widget, AMS rack-nozzle mapping popup, calibration rework, send-dialog nozzle mapping and extruder-count UI. Includes the fix to persist the AMS sync badge on filament cards (H2C/A2L and direct-sync printers).
Nozzle rack data model and device-tab panel, multi-nozzle sync, per-nozzle filament blacklist, and print-dispatch nozzle mapping (DevNozzleMappingCtrl V0/V1).
* ci: run unit tests on Windows and macOS
The Unit Tests CI job only ran on Linux, so platform-specific bugs
invisible to a Linux build could land undetected (e.g. the MSVC-only
NfpPlacer crash fixed in #14267). The full non-[NotWorking] suite already
builds and passes on every shipped arch, so this wires them into CI.
A reusable unit_tests.yml, called once per built arch, downloads that
arch's test artifact and runs ctest. Each build leg builds the test
executables and uploads them; a single publish_test_results job on Linux
aggregates the JUnit results into one check.
Coverage: Linux x86_64 + aarch64, Windows x64 + arm64, macOS arm64.
macOS x86_64 is deferred (cross-built on arm64, needs Rosetta).
- build_release_vs.bat: "tests" token enables BUILD_TESTS
- build_release_macos.sh: -T builds and runs tests; ORCA_TESTS_BUILD_ONLY
builds them without running (used by CI)
- scripts/run_unit_tests.sh: parameterized test dir and build config
Addresses #11273.
* ci: bump actions/checkout to v7 in reusable unit_tests workflow
Match the actions/checkout v6->v7 bump (#14517) that upstream applied to
the inline test job this reusable workflow replaces.
* fix: isolate calibration temp paths per user
The calibration temp files under <temp>/calib were file-scope statics
initialized before set_temporary_dir() runs at startup, so they kept
using the shared system temp root and missed the per-user isolation
added in #14607. On Linux every account shares /tmp, so the first user
to calibrate owns /tmp/calib and later users fail to write there, the
same cross-user collision #14607 fixed for model backups, STEP import,
and part skip.
Build the paths lazily from temporary_dir() instead, through a
calib_temp_dir() accessor and a calib_temp_file() join helper. The base
becomes <temp>/orcaslicer_<uid>/calib on Linux and is unchanged on
Windows, where the temp dir is already per user.
Also make StoreParams::path a std::string rather than a non-owning
const char*. The calibration code had to keep a std::string alive
solely to feed that pointer, and the field was uninitialized by
default; owning the string removes the lifetime hazard for all three
callers and makes the entry guard a reliable empty() check. Confined to
the 3mf project exporter (three callers, two internal reads); no
on-disk, format, or ABI impact.
Follows up on #14607 per @Noisyfox's review suggestion.
* dedupe-issues.yml remove unsupported claude_args option
claude_args: is causing an error. Only calling for "--model" anyway, so replaced with model: option.
* Merge branch 'main' into MisterAnderson91-dedupe-issues-yml-update
* fix: prevent out-of-bounds crash in Arachne beading interpolation
SkeletalTrapezoidation::interpolate() derives an inset index from `left` but
uses it to index the merged beading, which follows the thicker of left/right.
When the thicker side has fewer insets, the index runs past the end and the
slicer crashes during "Generating walls".
Skip the adjustment when the index is out of range, as the adjacent guards
already do. interpolate() uses no instance state, so make it static and add a
regression test that exercises it directly.
Fixes#14584
Replaces the plugin-only set_slices/set_fill_surfaces/set_lslices mutators with a
faithful, mutable binding of the core geometry types, so a plugin edits the slicing
graph through the same object model the C++ code uses.
- Point, Polygon, ExPolygon, Surface and SurfaceCollection gain constructors,
writable accessors (contour/holes, set/append/clear, filter_by_type), transforms
(rotate/scale/translate), boolean ops and offset. Polygon exposes a zero-copy
writable numpy view via a make_writable_rows helper.
- LayerRegion.slices/fill_surfaces stay read-only refs but are now live,
in-place-editable SurfaceCollections; Layer.make_slices() re-derives the islands
and refreshes lslice bounding boxes.
- Rewrites the Inset and Twistify samples on the new API (in-place ExPolygon
transforms, ExPolygon.offset, SurfaceCollection.set), dropping their numpy
dependency; each touched layer calls make_slices() so downstream steps see the
edited footprint. Adds tests covering in-place edits through a live collection.
BREAKING CHANGE: set_slices/set_fill_surfaces/set_lslices and the internal
parse_expolygon(_list)/surfaces_from_py helpers are removed. Plugins mutate through
the class API (SurfaceCollection.set/append/clear, Polygon.set_points/append,
ExPolygon.set_holes) instead.
* Support Painting: add Vertical/Horizontal axis-lock checkboxes
Adds the Vertical and Horizontal axis-lock checkboxes to the Support
Painting gizmo, matching the UI in the MMU Segmentation and Seam
Painter gizmos. The underlying constraint logic has lived in
GLGizmoPainterBase since #2424 and already applies to any
ToolType::BRUSH action — the Support gizmo was the only painter
without the UI to enable it.
The Circle and Sphere brush arms are consolidated into a single
"if (Circle || Sphere)" block matching the structure of
GLGizmoMmuSegmentation::on_render_input_window, eliminating
duplicate cursor-radius and axis-lock UI code.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Support Painting: keep Circle/Sphere as separate tool arms per review
Reviewer requested keeping a separate condition per tool for future
extensibility rather than merging Circle and Sphere into one branch.
This restores the upstream Circle/Sphere arm structure and adds the
Vertical/Horizontal axis-lock options to each arm, making the change
purely additive over upstream.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com>
Co-authored-by: yw4z <ywsyildiz@gmail.com>
feat: add regex_replace() string transform to filename templates
The filename template language could test strings (=~, !~, one_of) but
never rewrite one, so there was no supported way to reshape a placeholder
value, such as dropping a file extension from {first_object_name}.
Add regex_replace(subject, /pattern/, replacement), reusing the existing
regex-literal syntax and boost::regex engine. Every placeholder keeps
returning its exact value and the template does the transform explicitly:
{regex_replace(first_object_name, /\.[^.]*$/, "")} strip any extension
The replacement may reference capture groups ($1, $2, ...). It is one
grammar function mirroring digits(), with the name registered as a keyword
so it is not parsed as a variable.
Brings in the Plugins dialog as-you-type search with fuzzy match highlighting
and clickable column-header sorting (name, version, source, status) — PRs
#14610 and #14611.
Adds PluginHostSlicing, which registers the print-graph data model (Print,
PrintObject, Layer, LayerRegion, Surface, ExPolygon, extrusions, ...) into the
orca.host submodule in the same raw-class style as PluginHostApi's Model/Preset
graph, with shared helpers in PluginBindingUtils. SlicingPipelinePluginCapability
is trimmed to the capability surface (the standalone SlicingNumpy helper is folded
away). Adds the Twistify example plugin next to Inset and broadens the binding,
hook, and plugin-install tests.
Port from BambuStudio commit c8f70c6ca. Shows a warning when AMS
is actively drying during print job preparation, alerting users that
the drying temperature will be lowered during printing.
