Brings in 54 upstream commits, the bulk of them the BambuStudio-ported color
mixing / mixed filament subsystem (#15347) plus its follow-ups, along with the
Assimp-backed colored OBJ import, warning-policy build changes, and assorted
profile and localization updates.
Two conflicts, both "each side added at the same point", resolved by keeping
both:
- Print::validate() -- our IMEX multi-color block and upstream's new gradient
mixed filament warning were inserted at the same spot after the empty
extruders check. They test unrelated conditions, so both are kept, each with
its own closing brace.
- tests/libslic3r/test_3mf.cpp -- our three IMEX per-plate round-trip scenarios
and upstream's mixed-filament round-trip scenario both append to the end of
the file, and each side added one include. All four scenarios and both
includes are kept.
Everything else merged cleanly, including GCode.cpp, ToolOrdering.cpp,
PartPlate.cpp and PrintConfig.cpp. Upstream left the is_extruder_used block
untouched, so the IMEX supplement still applies, and estimate_wipe_tower_polygon
is unchanged, so the prime tower hull work is unaffected.
Not addressed here, and worth its own change: a mixed filament is a virtual slot
that no nozzle carries, while physical_extruder_map routes logical slots to
physical heads. Print::extruders() lists mixed slots under their own id whereas
tool_ordering.all_extruders() lists them post-expansion, so the IMEX pem lookups
have no defined answer for a mixed slot. Upstream's own guards reject a mixed
filament where a physical slot is required; IMEX likely wants the same.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Adds a new "Length" row to the sequential marker position popup in GCodeViewer and updates row capacity accordingly.
For arc commands (G2/G3) that are split into multiple vertices, it now sums segment distances across vertices with the same gcode_id so the displayed value reflects the full move length instead of a single chord.
Resolved 4 conflicts:
- PrintConfig.hpp / Preset.cpp: upstream restored calib_flowrate_topinfill_special_order
(removed in the prior merge, now re-added and re-registered); kept it alongside our
IMEX options (imex_parallel_mode, imex_head_filament_map).
- Plater.cpp: kept our <sstream> include plus upstream's <optional> and plugin includes.
- tests/fff_print/test_gcodewriter.cpp: both sides appended disjoint scenarios after a
shared base. Reconstructed as upstream's full file (base + its 3 toolchange/H2C
scenarios + the boost/filesystem include its helper needs) followed by our 10
set_pressure_advance / set_temperature scenarios. 22 scenarios total, no duplicates.
Follow-up to the cross-gantry mirror axis change, from an adversarial review of it.
GCodeViewer builds its own copy of the zone grid to place the sequential-preview
carriage markers, and it must reproduce PartPlate::calc_imex_zones exactly or the
markers drift away from the ghosts they are meant to track. It did not, in two ways,
because sizing the grid and placing a cell answer different questions:
- Sizing: calc_imex_zones counts every Copy/Mirror tool's OWN column, including the
non-representatives of an aggregated (Span) gantry -- they still donate a column.
GCodeViewer only ever saw the representative, so on an aggregated gantry it could
count fewer columns than the plate and lay its markers out against wider strips.
- Placement: calc_imex_zones PINS an aggregated cell to the primary's column, because
that row-strip spans the full bed and has no column of its own. GCodeViewer used the
representative's own column, which put the marker a strip away from the ghost
whenever the representative was not column-paired with the primary.
Track the two sets separately: grid_tool_ids sizes the grid from own columns, eff_col_of
pins only aggregated tools when placing. Out-of-grid tool indices are deliberately left
unfiltered -- calc_imex_zones drops them while calc_imex_ghosts keeps them, so no policy
here can agree with both, and a comment says so rather than pretending otherwise.
Also:
- The mirror-axis rule lived in three copies (two PartPlate lambdas plus an inline
re-derivation here). Hoist it to imex_mirror_axis_for() so the ghosts and the markers
cannot drift apart, and unit-test it, including degenerate tools_per_gantry.
- Drop imex_head_transform's mirror_axis default. A defaulted axis silently hands a
forgetful caller the X reflection, which is wrong for every cross-gantry tool and
fails silently -- exactly how a stale test kept certifying the old rule.
- Replace that stale test: it asserted a diagonal mirror "flips X only", the rule this
work overturned, and stayed green only because of the default.
- A secondary sharing the primary's gantry now takes the primary's Y box facing. The
box shows the side a tool could be hit from, and two tools on one beam can only be
hit by the same other gantry. No-op on the rear-* layouts, where the hardcoded value
already matched; on front-* layouts it pointed the box away from the only tools that
could reach it.
- Correct two comments that described the aggregated X-frame substitution as a
reflection plane. It is not one: it exists to zero gantry_offset.x, and removing it
would push aggregated ghosts a column off their strip.
Verified: 385/385 tests; CLI slice of the IMEX regression project is byte-identical to
the previous commit's G-code apart from the timestamp, confirming this is
visualization-only and cannot affect sliced output.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A Mirror tool reflects across the boundary it shares with the primary's zone, and
which boundary that is depends on where the tool sits:
- Same gantry: the tools are side by side along X, so the shared boundary is
vertical and the reflection negates X. This is what single-gantry IDEX does,
and it was the only case the code modelled.
- Different gantry: the zones are stacked along Y (front strip vs rear strip),
so the shared boundary is horizontal and the reflection negates Y. The part
that comes off gantry 1 is a Y-reflection of the tool directly behind it.
imex_head_transform() hardcoded diag(-1, 1, 1) for every mirror, as its own TODO
acknowledged. Lift the axis to a caller-supplied ImexMirrorAxis; PartPlate picks it
from the tool's gantry row. Both reflections keep det = -1, so a mirrored part stays
a true mirror image rather than a 180-degree rotation, which would print the
primary's part merely turned around.
The correct axis removes two workarounds. Both ghost paths special-cased aggregated
mirrors to "drop the X reflection, translate 1:1 and bake the flip into the mesh"
because reflecting X pushed the ghost off-bed as the primary was dragged. With a Y
reflection the X translation is already zero for aggregated tools, so that falls out
for free and the special cases are deleted.
Preview markers follow the same rule, which also fixes two placement bugs:
- Mirrors reflected across a Copy tool's zone edge, falling back to the primary's
column when a row had no Copy. In iq-mirror (0:P,1:C,2:M,3:M) the front row has
no Copy, so t2 and t3 both fell back and computed the identical X — both drawn
on top of each other in t3's zone. A mirror now reflects within its own zone.
- The toolhead footprint box flipped to the far side of the nozzle for any mirror
right of the primary. That only holds for an X-axis mirror, which reverses the
carriage's orientation; a cross-gantry mirror keeps the X orientation of the
tool behind it, so its box stays on the same side.
Tests cover the cross-gantry and diagonal cases, that the axis is caller-supplied
rather than inferred from the offset vector, and that both axes are reflections
(det = -1) rather than rotations.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Conflicts were all co-located additions rather than design collisions:
- GCode.cpp: adopt upstream's toolchange(filament_id, nozzle_id) signature and
per-variant set_config_index() while keeping the IMEX bare-T<n> suppression;
rebase the second-layer temperature loop's non-IMEX branch onto upstream's
get_filament_config_index() resolution.
- Preset.cpp / PresetBundle.cpp / PrintConfig.cpp: keep both sides' option-list
and enum-map entries.
- GLCanvas3D.cpp: upstream's printable_heights argument plus the IMEX ghost pass.
- PartPlate.cpp: keep <set> (still used).
- test_gcodewriter.cpp / test_3mf.cpp: keep both sides' test cases.
Resolves two conflicts:
- GLCanvas3D.hpp: keep both the IMEX ghost render declarations and
upstream's _render_wireframe_overlay().
- test_gcodewriter.cpp: both sides appended test cases to the same
region; keep upstream's origin/machine-limit tests alongside the
pressure-advance and temperature scenarios.
Multi-nozzle sync widget, AMS rack-nozzle mapping popup, calibration rework, send-dialog nozzle mapping and extruder-count UI. Includes the fix to persist the AMS sync badge on filament cards (H2C/A2L and direct-sync printers).
Catches the iXex/IDEX parallel-printing branch up to upstream main
(102 commits). Two content conflicts resolved:
- src/libslic3r/Preset.cpp: s_Preset_printer_options — kept upstream's
new "use_3mf" key and our iMEX printer-capability/mode keys.
- tests/fff_print/test_gcodewriter.cpp: upstream revived the disabled
suite (#14196), dropping the obsolete [.]-tagged lift() test and its
config_lift_unlift.ini; kept their set_speed + z_hop tests and appended
our 10 per-firmware set_pressure_advance/set_temperature scenarios.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
fix: apply smart preview defaults per extruder count session
- Track last extruder count (1=single, 2+=multi) instead of boolean flag
- Apply appropriate default (ColorPrint/FeatureType) when count changes
- User selections persist within same extruder count
- Symmetric behavior: both single and multi actively apply defaults
- Delete duplicate dead code block (uncommented TODO scaffolding)
Behavior:
- First slice (any type) → appropriate default
- User changes view → persists on re-slice
- Switch single→single or multi→multi → persists
- Switch single↔multi → appropriate default applies
Switching to a printer with fewer filaments (e.g. H2D -> X2D) threw
std::out_of_range in check_filament_printable. Clear stale per-volume
extruder config on count shrink and bound-check filament indices at the
read sites.
The firmware-managed-zones writer offset centers the slice at bed origin,
so prim_pos and the preview toolpaths sit in a shifted frame relative to
the plate-local bed bounds the secondary-marker zone math uses. Computing
secondaries against unshifted bed bounds puts them off the build plate.
Skip the secondary-marker / toolhead-box computation when the
firmware-managed-zones option is enabled. The firmware physically fans the
centered toolpath out into the zones at print time, so the honest preview
is the single centered toolpath with no secondaries.
Reported by @Felix14-v2 on PR #13086.
- Layout enum read via opt<ConfigOptionEnum<ImexToolLayout>>() did a
dynamic_cast that fails for the ConfigOptionEnumGeneric type enums load
as from presets, silently defaulting to FrontLeft. This desynced flip_y
from PartPlate::calc_imex_zones, computing secondaries against the wrong
primary zone and rendering them off the bed. Use option<>() (type-checked
static_cast), matching how PartPlate reads the same key.
- Span modes now collapse each non-primary gantry to one active marker via
group_imex_active_tools_by_gantry() (the same aggregation PartPlate uses
for zones), since only one tool prints per zone at a time. Previously every
Copy/Mirror tool got its own marker.
- Aggregated mirror markers reflect across the bed centerline rather than a
column edge; the aggregated strip spans full-X, so edge reflection would
push the marker off the bed.
Includes nozzle-diameter guards for printers without nozzle info (#13255,
now landed upstream) and manual-calibration nozzle mismatch fix (#13882).
# Conflicts:
# src/slic3r/GUI/GCodeViewer.cpp
# src/slic3r/GUI/GLCanvas3D.hpp
# src/slic3r/GUI/Tab.cpp
* feat(viewer): Display travel distance and move count in G-code summary
This commit introduces a new feature that enhances the G-code viewer by displaying the total travel distance and the total number of travel moves in the 'Line Type' summary.
This provides users with more detailed statistics about their prints, helping them to better understand the printer's behavior and identify opportunities to optimize travel moves for faster print times.
This commit also fixes a critical bug in the G-code processor where the travel distance was being calculated incorrectly. The distance variable was not being updated for non-extruding travel moves, leading to inaccurate statistics. The calculation has been corrected to ensure it is performed for all relevant move types, resulting in accurate travel distance reporting.
* Subfix segments
kilo mega giga tera peta exa
* Add missing values
* Grams to Kilos and tons
* add distance
* Fix tool view
* Record and display seam distances
Track seam-related distances in print statistics and show them in the GCode viewer. Added total_seam_gap_distance and total_seam_scarf_distance to PrintEstimatedStatistics (with initialization). In GCode::extrude_loop the code now computes seam gap and scarf distances and accumulates them for external perimeters. GCodeViewer uses the summed seam distance when the Seams option is selected in the legend.
* Fix travel / wipe distances
* Update GCode.cpp
* Filament changes estimated time
---------
Co-authored-by: Steve Scargall <37674041+sscargal@users.noreply.github.com>
* Fix speed popup refresh and sizing in Preview
Fix two UX issues in the Preview actual speed profile popup.
Keyboard-driven horizontal slider changes could leave the popup visually stale
until a later input event, which made keyboard navigation feel delayed.
Also, the speed-profile popup could briefly render at an incorrect height
before resizing on the next frame.
This change makes keyboard slider updates explicitly request a follow-up frame,
so refresh no longer depends on incidental mouse activity.
It also removes auto-resize from ToolPositionTableWnd and sizes the popup
before begin() each frame. The popup height is computed from plot height,
table rows, and window paddings, then clamped to at least the height of the
adjacent ToolPosition window.
The popup width is now computed from translated header text and padding terms,
with a 16:9-derived minimum for a more stable appearance. The width is cached
for the session and recalculated when UI scale changes.
Result:
- keyboard navigation updates reliably
- popup no longer shows the transient wrong-height first draw
- sizing is more stable across scale and localization
* Fix ToolPosition window also + other fixes
* Fix compile error when ENABLE_ACTUAL_SPEED_DEBUG disabled
IMGUI_DEFINE_MATH_OPERATORS is needed even if ENABLE_ACTUAL_SPEED_DEBUG is not enabled
* Guard seam fallback vertex index in GCodeViewer
Felix14-v2 PR review feedback (https://github.com/OrcaSlicer/OrcaSlicer/pull/13086#issuecomment-4323696312)
plus the slice-time validation work that follows from his bug list.
UI polish:
- Capitalize "Primary" in display (right-click mode menu, plate tooltip).
Sentinel stays lowercase for wire compatibility.
- Pre-slice-warnings checkbox now uses Orca's ::CheckBox so it matches the
green toggle style of the rest of the IDEX/IQEX configuration page.
- DPI-scaled the IMEXModesCtrl (modes editor) sub-panels, button grid,
text wraps, gcode textarea, and the ghost-tooltip swatch (imgui.scaled).
Legend swatches sized to body-text height for visual balance.
- Primary mode tool buttons in the modes editor are now disabled (read-
only): cycling roles on the IMEX-off mode is a no-op and confusing.
- Modes editor sub-panels now explicitly inherit the app's window-default
dark colour so chromeless ScalableButtons don't render with a visible
light box around their icons on GTK dark themes.
- Per-mode-line reset arrows in the modes editor: each row gets a small
reset bitmap that snaps that row's name+tools+gcode triplet back to the
saved preset's value. matches_config() guard on the page-level reload
prevents the textbox-being-typed-into from being destroyed mid-keystroke.
- New View menu item "Show IDEX/IQEX Toolhead" — toggles the per-carriage
footprint boxes during G-code preview playback. Gated to Preview tab +
IMEX printer; backed by app_config so it persists.
Coordinated config migrations:
- imex_tool_layout and imex_viz_theme migrate from coString to coEnum
(ImexToolLayout / ImexVizTheme). Existing wire format preserved so
saved presets and 3MFs deserialize unchanged. Side-benefit: both now
pick up standard Field rendering and so finally show reset arrows.
Slice-time safeguards (the validation half):
- imex_suppresses_bare_toolchange(parallel_mode, count): suppresses the
slicer's bare T<n> at print-start in any IMEX parallel mode (the user's
imex_mode_gcode + machine_start_gcode owns tool activation there). Mid-
print T<n> emits normally — Print::validate blocks the configurations
where mid-print T<n> wouldn't make sense. Applied to both code paths
inside GCode::set_extruder (the long multi-extruder path AND the
single-extruder path that fires when multiple_extruders=false).
- imex_multicolor_block_reason(): hard-stop validator returning a user-
facing reason string when the active IMEX configuration can't physically
support multi-color. Catches IDEX (1 tool/gantry), 2-tool-active IQEX
(no within-gantry swap topology), and any MMU/AFC lane sharing among
used filaments. Wired into Print::validate as a slice blocker, and into
PartPlate::has_imex_multimaterial_conflict so the plater badge agrees
with the slice block (no more false positives where the badge warns but
the slice goes through).
- New imex_mode_types config option (parallel array to imex_mode_names)
and imex_mode_type_for() helper. Mode-type tag drives behaviour: zones,
ghosts, and validation interpret modes differently per type. Initial
types: "primary", "copy", "mirror", "split". Split modes are explicitly
designed for paired-gantry IQEX multi-color and bypass the gantry-pair
check in imex_multicolor_block_reason (MMU sharing still blocks them).
Test coverage:
- New unit tests cover imex_suppresses_bare_toolchange (4 cases),
imex_multicolor_block_reason (8 cases including IDEX, IQEX 2-/4-tool-
active, MMU sharing, missing primary, Split type), and imex_mode_type_for
(3 cases including legacy fallback). Total: 186 IMEX assertions across
71 test cases, all passing.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Follow-up to 085f5ccec8. Self-review of that commit's grep output missed
GCodeViewer.cpp. Three sites in the layer-preview multi-carriage marker
logic still compared against the bare "primary" literal:
- GCodeViewer.cpp:1538 — process-preset mode default
- GCodeViewer.cpp:1542 — per-plate mode override gate
- GCodeViewer.cpp:1551 — secondary marker computation gate
All three now use kImexPrimaryMode. The file already includes
IMEXHelpers.hpp (line 13) so no new include needed.
Verified by grepping the full IMEX-touching set: only IMEXHelpers.hpp
itself (the constant definition) still references the literal string,
which is correct.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Four quick-fix items surfaced by pre-PR self-review.
GCodeViewer.cpp:1607
Null-check get_curr_plate() before dereferencing. Other call sites in
the file already guard; this was the only unguarded one in the IMEX
layer-preview path. In practice m_plate_list always has a plate, but
the inconsistency is easy to fix and removes the only ungated deref.
PartPlate.cpp:build_imex_cache_key
Cache key for IMEX zone geometry truncated nozzle_clearance_x/y to int
before stringifying — a config change from 30.0 to 30.5 would not
invalidate the cache. Match the *10 precision pattern already used for
imex_carriage_margin so 0.1 mm steps invalidate correctly.
Plater.cpp:select_plate_by_hover_id (right-click popup)
Two issues:
1. Lambda captured `modes` by reference. PopupMenu() is synchronous
today so the reference outlived the menu's event handling, but the
pattern is fragile — anyone refactoring to async Popup() would
silently dangle. Capture by value.
2. Used wxID_HIGHEST + i for menu item IDs — standard wx anti-pattern
because it can collide with other handlers listening in that range.
Allocate per-item IDs via wxNewId() and look up the chosen mode by
finding the event ID in a parallel vector. The lookup becomes O(N)
instead of O(1) but N is small (mode count) and this is clicker
latency, not a hot path.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
PartPlate::calc_imex_zones, GCodeViewer::render, and Plater::collect_imex_warnings
each hand-rolled their own "phys:P/C/M" tokenizer with subtly different error
handling. Replace the three inline loops with parse_imex_active_tools +
imex_primary_tool_for_mode so the Primary/Copy/Mirror classification agrees
across zones, the G-code viewer legend, and slice warnings.
No behavior change: the shared helpers preserve the 1=Primary / 2=Copy /
3=Mirror encoding already consumed downstream and continue to accept the
legacy bare-index form as Primary.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Add runtime display backend detection for Wayland support
Add LinuxDisplayBackend utility to detect X11 vs Wayland at runtime
using GDK_IS_X11_DISPLAY / GDK_IS_WAYLAND_DISPLAY macros. This is
the foundation for removing the forced GDK_BACKEND=x11 and enabling
native Wayland support.
- New files: LinuxDisplayBackend.hpp/.cpp with get_linux_display_backend(),
is_running_on_wayland(), and is_running_on_x11()
- Propagate wxHAVE_GDK_X11 / wxHAVE_GDK_WAYLAND from FindGTK3.cmake
as compile definitions to libslic3r_gui
- No-op on non-Linux platforms (returns Unknown / false)
* Fix Phase 1 code quality: pragma once, source ordering, static cache
* Make X11 initialization conditional for Wayland support
Remove the unconditional GDK_BACKEND=x11 force that blocked native
Wayland. Replace with conditional logic:
- EGL safety fallback: re-force X11 only when wxUSE_GLCANVAS_EGL is
off and WAYLAND_DISPLAY is set, with a warning log
- XInitThreads() only called when DISPLAY is set (X11 in use)
- __GLX_VENDOR_LIBRARY_NAME only set when DISPLAY is present (GLX-specific)
- WEBKIT_DISABLE_COMPOSITING_MODE only set under XWayland (both
DISPLAY and WAYLAND_DISPLAY present)
- Guard X11/Xlib.h include with __has_include for robustness
- Restore display validation to accept either DISPLAY or WAYLAND_DISPLAY
This is Phase 2 of the Wayland support plan.
* Fix Phase 2: safer EGL macro check, add clarifying comments
* Add GLAD2 library and replace GLEW linkage in build system
Set up GLAD2 as a static library to replace GLEW for OpenGL loading.
GLAD2 supports both GLX and EGL, which is required for Wayland support.
- Create src/glad/ with pre-generated GLAD2 sources (GL 4.6 compat)
- Add src/glad/CMakeLists.txt building glad as a static library
- Wire glad into src/CMakeLists.txt before libvgcode
- Modify libvgcode to use shared glad for GL path (keeps local copy
only for GLES2/Emscripten) to avoid duplicate symbol conflicts
- Replace GLEW::GLEW with glad in libslic3r_gui link libraries
Note: GLEW is kept in deps for OpenCSG. Code migration from GL/glew.h
to glad/gl.h headers will follow in Phase 3B+3C.
* Fix Phase 3A+3D: libvgcode GLAD include, dead files, dlopen dep, OpenGL link var
* Migrate from GLEW to GLAD: replace headers and API calls across codebase
Replace all #include <GL/glew.h> with <glad/gl.h> across 49 source files.
Migrate GLEW API calls to GLAD equivalents:
- glewInit/glewExperimental -> gladLoaderLoadGL()
- GLEW_EXT_* / GLEW_ARB_* extension checks -> GLAD_GL_EXT_* / GLAD_GL_ARB_*
- Remove GLEW-specific EGL/GLX mismatch #error guards (not needed with GLAD)
- Replace unavailable EXT symbols with core GL equivalents in
GLCanvas3D.cpp (GL_MAX_SAMPLES, glRenderbufferStorageMultisample,
glBlitFramebuffer, GL_READ/DRAW_FRAMEBUFFER)
- Update log messages from glewInit to gladLoadGL
* Fix Phase 3B+3C: remove GLEW find, clean EXT symbols, update attribution
- Remove find_package(GLEW) block from root CMakeLists.txt since GLEW
is no longer linked by any main application code
- Remove "glew" from SLIC3R_STATIC option description
- Replace all remaining EXT framebuffer symbols with core equivalents
in render_thumbnail_framebuffer_ext and _rectangular_selection_picking_pass
- Update AboutDialog credits from GLEW to GLAD
* Enable EGL in wxWidgets and add runtime GLX/EGL selection for Wayland
- Set wxUSE_GLCANVAS_EGL=ON in wxWidgets build and Flatpak manifest
- Add PreferGLX() call on X11 sessions for driver compatibility
- Remove Phase 2 safety fallback (EGL is now always compiled in)
- Guard SwapBuffers against hidden canvases to prevent Wayland stalls
* Fix Phase 4: move PreferGLX to app startup, fix FPS counter guard
Move wxGLCanvas::PreferGLX() from OpenGLManager::create_wxglcanvas()
(static initializer) to GUI_App::on_init_inner() before any wxGLCanvas
is constructed. This prevents a race where SkipPartCanvas could trigger
wxGLBackend::Init() before the GLX preference is set. The new location
also adds explicit is_running_on_wayland() detection with a warning for
unknown backends.
Move increment_fps_counter() inside the IsShownOnScreen() guard so FPS
is only counted when a frame is actually swapped.
* Update GLFW from 3.3.7 to 3.4 for runtime Wayland/X11 backend selection
Replace the compile-time GLFW_USE_WAYLAND flag (which locked to a single
backend) with GLFW 3.4's GLFW_BUILD_WAYLAND + GLFW_BUILD_X11 flags that
build both backends and auto-select at runtime based on the available
display server. This enables the CLI thumbnail renderer to work on both
Wayland and X11 sessions without separate builds.
* wayland: Fix UI call sites that rely on global screen coordinates
On Wayland, wxGetMousePosition() returns (0,0) and SetPosition() is a
no-op for top-level windows. Fix the highest-impact call sites:
- GLCanvas3D: Use cached m_mouse.position from event handlers instead
of wxGetMousePosition() + ScreenToClient() in get_local_mouse_position()
- Plater: Use event-relative coords via ClientToScreen(e.GetPosition())
instead of wxGetMousePosition() in 3 leave-window handlers
- BBLTopbar: Use event.GetPosition() and FindToolByPosition() directly
in mouse handlers instead of wxGetMousePosition()/FindToolByCurrentPosition()
- Search: Use focus-based dismiss logic on Wayland instead of
wxGetMousePosition()-based rect checks in SearchDialog and
SearchObjectDialog
- GUI_App: Skip SetPosition() in window_pos_restore() on Wayland where
it is a no-op; still restore size and maximize state
- Button: Position tooltip relative to button widget via ClientToScreen
instead of wxGetMousePosition()
* Fix SearchDialog Wayland dismiss: guard against search_line focus
* flatpak: Add Wayland socket permission for native Wayland support
* spec
* Fix crash on Wayland when wxWidgets lacks EGL support
Restore the safety fallback that forces GDK_BACKEND=x11 when wxWidgets
was not built with wxUSE_GLCANVAS_EGL=ON. Without this, the GLX backend
tries to access a non-existent X11 display on native Wayland, crashing
in wxGLCanvas::IsDisplaySupported() with SIGSEGV at offset 0xe4.
Also add a defense-in-depth guard in detect_multisample() that skips
the IsDisplaySupported call entirely on Wayland without EGL.
Root cause: deps/wxWidgets must be rebuilt after enabling EGL. The
compile-time check in OrcaSlicer.cpp detects the mismatch and falls
back safely.
* Fix EGL detection: use wxHAS_EGL instead of wxUSE_GLCANVAS_EGL
wxUSE_GLCANVAS_EGL is a CMake build option, NOT a C++ preprocessor
macro. The actual macro defined in wxWidgets setup.h is wxHAS_EGL.
All compile-time EGL checks were using the wrong macro, causing
the safety fallback to always trigger even with a properly built
EGL-enabled wxWidgets.
* Fix GL function pointers invalidated on Wayland/EGL
gladLoaderLoadGL() dlopen's libGL.so.1 to resolve GL function pointers
via dlsym, then immediately dlclose's the handle. On X11/GLX this is
fine because the GLX context keeps libGL.so mapped. On Wayland/EGL,
nothing else holds libGL.so open, so dlclose unmaps it and all function
pointers become dangling — causing SIGSEGV on the first GL call.
Fix: on Wayland, use gladLoadGL(eglGetProcAddress) which resolves
function pointers through the EGL loader without opening/closing
libGL.so.
* fix crash on start and various rendering issues
* fix crash on close
* small refactor
* move GPU selection to desktop file
* clean up a bit
* clean up more
* fix appimage error
IMEXModesCtrl:
- Primary mode is now a non-deletable first row stored as sentinel
"primary" in imex_mode_names; older configs load cleanly
- New rows default T0 → Primary when no tool assignment is stored
- Filter "primary" from plater popup/cycle list to prevent double entry
- imex_tools_per_gantry cap raised 2 → 4
Zone sizing:
- Zone width/height now based on active tool count only; inactive tools
donate their bed share to active neighbors (fixes 4-tool layout)
- Active col/row maps (col_to_zone/row_to_zone) applied consistently
across zone fills, collision strips, and primary zone box
GCodeViewer animation:
- Mirror position formula fixed: left-of-copy reflects across copy
zone's left edge; right-of-copy reflects across right edge
(T3 was rendering on top of T1)
- strip_width/row_strip_height use active counts, matching PartPlate
Stability:
- Early return in calc_imex_zones() when tool_states is empty; prevents
OOB crash on new printer with stale process-preset mode name
- is_imex toggle in on_config_change calls refresh_imex_icons() so the
plate mode icon appears without requiring a new project
GCode:
- Remove "primary" guard so Primary mode gcode field is emitted at
start of print
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add per-plate iXex mode icon to the plate toolbar (normal, hover, dark, dark-hover SVG variants)
- Left-click cycles through available modes; right-click shows a popup menu with all modes as radio items
- Mode changes are recorded in the undo/redo snapshot system
- Fix double context menu: suppress EVT_GLCANVAS_PLATE_RIGHT_CLICK and EVT_GLCANVAS_RIGHT_CLICK when the iXex icon popup was already shown
- Remove ixex_parallel_mode combo from Print Settings > Other > Special mode (superseded by per-plate icon)
- Remove dead code: refresh_ixex_mode_combo(), m_ixex_mode_combo member, related Tab reload hook
- iXex mode persisted in 3MF project files via existing plate metadata serialization
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Config key rename (breaking for saved profiles — call out in PR):
ixex_carriage_width_x/y → ixex_nozzle_clearance_x/y
Labels updated to "Nozzle Clearance X/Y" with consistent tooltips
describing the measurement as nozzle-to-collision-side-edge distance.
Strip math fix:
Previously halved the clearance value (× 0.5) under the assumption
the nozzle was centered in the carriage. The measurement is now the
literal nozzle-to-edge distance, so the × 0.5 factor is removed.
The collision strip width now equals the configured value directly.
Carriage box visualization (GCodeViewer):
- Add per-carriage box_offset_x/y so the nozzle marker sits at the
physically correct edge of the footprint box rather than centered.
- X: zone-based by default (nozzle at inner edge facing bed center).
Copy secondaries inherit the primary's X orientation (same movement
direction). Mirror secondaries use the collision-side edge.
- Y: always row-based regardless of copy/mirror mode. Gantry is always
behind the nozzle (high-Y); front-row primaries with a back-row
secondary override to place nozzle at the low-Y edge.
- Fix stale mesh bug: GLModel::init_from() is a no-op when already
initialized. Call reset() before init_from() so mesh rebuilds
correctly when nozzle clearance values change in config.
- Remove m_ixex_toolhead_box_dims (was the now-unnecessary cache key).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Introduces first-class parallel printing (copy/mirror modes) for printers
with multiple independent X-axis carriages. Branded iXex (independent X
extruder), targeting Klipper firmware with a firmware-agnostic design.
- PrintConfig: new printer options declaring iXex capability and geometry
(is_ixex, ixex_gantry_count, ixex_tools_per_gantry, carriage dims,
tool layout, and per-mode name/role/gcode arrays)
- Preset: iXex keys registered in printer and process preset option lists
- Tab: IXexModesCtrl visual grid editor in Printer preset tab; mode
dropdown in Process → Others tab; clear_pages() nulls iXex pointers to
prevent dangling-pointer crash on preset save
- PartPlate: 2D zone visualization (active/dimmed/dividers) and
placement-violation detection (has_ixex_placement_violations) that
blocks slicing when objects fall outside the primary zone
- Plater: violation detection wired into update_background_process so
the Slice button is disabled with an error notification on violation
- GCode: mode-activation G-code injected before machine_start_gcode
- GCodeViewer: multi-carriage toolhead markers in sequential preview,
filament legend annotated with active carriage count and mode name
- Wrap GetToolTipCtrl() call in GUI_App.cpp with #if wxVERSION_NUMBER < 3300
guard, as this API may not be accessible in wxWidgets 3.3. The dark tooltip
theming is cosmetic and non-critical.
- Add explicit #include <wx/utils.h> to 7 source files that use functions from
that header (wxGetMousePosition, wxLaunchDefaultBrowser, wxGetDisplaySize,
wxBell) but relied on transitive includes. This preempts breakage from
wxWidgets 3.3 reducing transitive includes.
Files with wx/utils.h added: BBLTopbar.cpp, CreatePresetsDialog.cpp,
CameraPopup.cpp, GLCanvas3D.cpp, GCodeViewer.cpp, GUI_ObjectList.cpp,
FilamentMapPanel.cpp.
Skipped BindDialog.cpp and FilamentPickerDialog.cpp as they already include
wx/wx.h which provides wx/utils.h transitively.
Part of wxWidgets 3.1.5 -> 3.3.2 upgrade.
