A dedicated PrinterAgentChoice field
reads rows straight from the live
agent registry and stores the agent
id string, replacing the fake-coEnum
index mapping. The field moves to
TabPrinter and registers with the
searcher so UnsavedChanges renders
it; the PhysicalPrinterDialog copy
and its update hook are removed
(#125). switch_printer_agent now
resolves ids via
resolve_printer_agent_id.
Replace per-printer auto-activation
(is_current_printer_agent_plugin)
with a global experimental AppConfig
toggle, default off: legacy
print-host behavior is unchanged
until the user opts in. The toggle
drives device-tab routing, print
button defaults, connect-button
visibility and sidebar layout, and
dedups machine-select dialog opens.
set_live_printer_agent centralizes
the swap: deselect the machine,
clear stale sidebar state and the
previous agent's Other Devices, then
install the new agent (or null when
its provider vanished). Plugin
load/unload callbacks refresh the
dropdown and re-run agent selection.
load_last_machine no longer falls
back to the first available machine.
A dedicated PrinterAgentChoice field
reads rows straight from the live
agent registry and stores the agent
id string, replacing the fake-coEnum
index mapping. The field moves to
TabPrinter and registers with the
searcher so UnsavedChanges renders
it; the PhysicalPrinterDialog copy
and its update hook are removed
(#125). switch_printer_agent now
resolves ids via
resolve_printer_agent_id.
test(libslic3r): replace the disabled convex_hull_2d test, closing #11269
The last "failing libslic3r test" from #11269 was the disabled
SCENARIO("2D convex hull of sinking object", "[3mf][.]") in test_3mf.cpp.
It checked ModelObject::convex_hull_2d for a sinking object against
PrusaSlicer's reference hull, but Orca's convex_hull_2d does not clip
geometry below the bed the way PrusaSlicer's its_convex_hull_2d_above does,
so the reference never matched. The test also wrote a debug mesh to a
hardcoded /tmp path and its comparison loop was inverted.
Remove it and add tests/libslic3r/test_model.cpp characterizing
convex_hull_2d on non-sinking transforms (identity and scale+offset),
where the projected footprint is unambiguous. Homed in a Model test file
since it exercises ModelObject, not 3MF.
* Fix gizmo being closed after releasing mouse outside the gizmo floating window
The left up event of a drag started on the gizmo floating window (e.g.
selecting text in an input field) and released over the bed was treated
as a click on the plate, which deselected the objects and closed the
active gizmo. Add the ignore_left_up guard to the plate select branch,
matching the deselect branch above.
Co-Authored-By: Claude <noreply@anthropic.com>
* Fix Emboss gizmo being closed after releasing mouse outside its floating window
The Emboss gizmo has its own close-on-click-away handler
(on_mouse_change_selection) that was not protected against left up events
originating from ImGui windows, so the gizmo was still closed when a drag
started on its floating window (e.g. selecting text in the input field)
ended over the 3D scene. Expose the canvas's ignore_left_up state to
gizmos and skip the close check for such releases.
Co-Authored-By: Claude <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* imgui: Clamp mouse y-coordinate in multi-line click/drag to text bounds
In single-line mode, click and drag already clamped y to the line's
y-coordinate so the cursor would continue to follow the x-position when
the mouse went off the top or bottom of the text. Multi-line mode did
not clamp, so stb_text_locate_coord() would return 0 (above) or n
(below), snapping the cursor to the very start or end of text and
ignoring the x-coordinate entirely.
Now both modes walk the row layout to compute the top of the first row
(y_min) and bottom of the last row (y_max, minus half a line height to
add tolerance for rounding), then clamp y to that range before passing
it to stb_text_locate_coord(). This means dragging or clicking above
the text now places the cursor on the first line at the x-coordinate,
and dragging/clicking below places it on the last line at the
x-coordinate, matching the single-line precedent.
* Fix issue that cursor cannot be placed at the last empty line
BeltAffine activates the FirstLayerPlane evaluator unconditionally, so on a
non-belt printer on_first_layer(point) stopped agreeing with the legacy
slicing-layer-0 test. Every per-path first-layer call site in _extrude then
took the non-first-layer branch, and first-layer speeds were skipped: brim
came out at the volumetric fallback (24.6 mm/s) instead of initial_layer_speed
(10 mm/s). This is the shared speed path, so it affected all printers on this
branch, not just belt ones.
Auto resolves to BeltAffine only when belt_printer is set with a non-zero
slicing rotation, and to XY (evaluator inactive, legacy behaviour) otherwise --
exactly what the option's own description already promised.
Caught by "Brim uses first layer speed" (upstream #14616), which arrived with
the upstream merge; the bad default dates back to a9bae54f20 (#30). Verified
against a pristine upstream/main build, which passes the same test.
tests/fff_print: 100/100 test cases, 1085 assertions (was 99/100).
Both belt regression tests still pass, confirming Auto still resolves to
BeltAffine for belt printers.
Note: this changes a config default. Projects and profiles that stored
first_layer_plane explicitly are unaffected; those relying on the default will
now get correct first-layer speeds on non-belt printers, so their G-code
changes accordingly.
Processes a minimal belt start sequence through GCodeProcessor::process_buffer
and asserts the move preceding the first extrusion keeps its real Z, so it can
no longer back-transform to model Y~=0 and produce the phantom extrusion line.
Belt printers are non-Bambu, so the processor uses the compatible reserved
tags ("TYPE:"); the test sets s_IsBBLPrinter=false (saved/restored via an RAII
guard) to mirror the real printer. Proven to fail without the fix (the
prepare-stage move's Z is pinned to the first-layer height, 0 here) and pass
with it.
On a belt printer the sliced preview drew a stray extrusion-colored line
from Y~=0 to the model, rendered in the first extrusion role's color. It is
not a travel and does not occur on non-belt printers.
GCodeProcessor::store_move_vertex pins a move's stored Z to the first-layer
height during the start-G-code "prepare" stage. That is a harmless cosmetic
tidy-up on a normal printer, but on a belt printer the designed-view
back-transform couples machine Z into the rendered model Y (the belt tilt
mixes the height and belt-feed axes). Pinning Z back-transforms the last
prepare-stage move (the unretract before the first extrusion) to model
Y ~= 0, and libvgcode then draws a phantom extrusion segment from Y ~= 0 to
the first real toolpath.
Keep the real Z for belt printers (gated on belt_tilt_angle, parsed from the
G-code header before the body) so prepare-stage moves back-transform
correctly. Non-belt processing is byte-identical. The emitted G-code was
already correct; this is a preview-geometry fix.
Locks in the fix from the previous commit. A fresh BeltGCodeWriter has an
unestablished planar position (is_current_position_clear() == false) and its
m_pos.xy is the origin (0,0). With a pending NormalLift z-hop, travel_to_xyz
used to lift in place via _travel_to_z(), which in belt mode shears the origin
into a machine Y ~= the layer Z — a move far up the gantry.
The test configures an X-tilt 45 deg belt transform, defers a z-hop via
lazy_lift, travels to a near-belt first point (transformed gantry Y ~= 1mm),
and asserts no emitted move has Y anywhere near the layer Z. Verified to fail
without the fix (max emitted Y = 100.0 vs the destination's ~1.0) and pass with
it.
On a belt printer the first travel of the print emitted a bogus move to
the bed corner with the nozzle far up the gantry, e.g.
G1 X95 Y168.19 Z237.857 F12000
right after the first "; printing object" line. Y168 (≈ the layer Z)
is out of the gantry's range.
Root cause: the layer-change z-hop is deferred via lazy_lift and consumed
by the first BeltGCodeWriter::travel_to_xyz, whose NormalLift branch does a
separate lift-in-place via _travel_to_z(target.z()). On a normal printer
_travel_to_z emits a Z-only move, but in belt mode Z is coupled to Y/X, so
_travel_to_z re-emits the current m_pos through the belt shear. At print
start (and after custom gcode) m_pos.xy is still the uninitialised origin
(0,0), which the back-transform + axis-remap shear into machine
(X=bed_max, Y=layer_z) — the illegal move.
Guard the NormalLift branch on is_current_position_clear(), matching the
SlopeLift branch directly above it which already does so. When the position
isn't established there is nothing to lift over, and the xy_z_move that
follows travels straight to the destination with full XYZ, establishing the
correct position. Bookkeeping is unaffected: in this path m_lifted stays 0,
so no spurious restore move is produced.
Verified by re-slicing the repro project: the start-of-print move is now
G1 X44.946 Y.621 Z237.857 (straight to the first object point), no move
touches the bed-max X edge, and the max Y over the whole file is 62.8mm
(printable_height 100).
On Linux the bundled CPython silently links the system OpenSSL instead of
the one built in deps/, and the dependency build then fails:
install: cannot stat 'Modules/_ssl.cpython-312-x86_64-linux-gnu.so':
No such file or directory
The chain:
* OpenSSL's linux-x86_64 target sets multilib=64, so 'make install_sw'
installs the static libs to <prefix>/lib64 while every other dependency
in the prefix uses <prefix>/lib.
* CPython's --with-openssl=<dir> only ever emits -L<dir>/lib. It does not
look in lib64, so -lssl resolves to the system OpenSSL.
* gcc -shared does not error on unresolved symbols, so the link appears to
succeed. _ssl.c was compiled against the bundled 1.1.1w headers, which
map SSL_get1_peer_certificate onto the pre-3.0 SSL_get_peer_certificate
-- a symbol OpenSSL 3.x removed. The module then fails to import:
_ssl failed to import: undefined symbol: SSL_get_peer_certificate
Could not build the ssl module!
* With no _ssl built, 'make install' cannot stat it and the build stops.
Passing --libdir=lib keeps the prefix single-layout, so CPython's -L<dir>/lib
finds the bundled static libraries and links against the headers it was
compiled with.
CMake-based dependencies were unaffected throughout, because CMake's
FindOpenSSL searches lib64 on its own; only CPython's autoconf path is
sensitive to this.
Affects any distribution where OpenSSL selects the lib64 layout, which is the
Fedora, openSUSE and Arch families. Debian and Ubuntu are unaffected, which is
why CI has not seen it.
Verified on Arch (GCC 16.1.1, CMake 4.4.2): the dependency build completes and
the bundled interpreter reports the bundled OpenSSL rather than the system one:
$ deps/build/OrcaSlicer_dep/usr/local/libpython/bin/python3.12 \
-c 'import ssl; print(ssl.OPENSSL_VERSION)'
OpenSSL 1.1.1w 11 Sep 2023
Not verified on macOS or Windows. The flag is accepted by OpenSSL's Configure
on all platforms and Darwin targets do not set multilib, so it should be a
no-op there, but CI is the check.
Upstream retyped travel_speed and travel_speed_z to ConfigOptionFloatsNullable
and initial_layer_travel_speed to ConfigOptionFloatsOrPercentsNullable, so the
scalar .value / get_abs_value() accessors no longer compile. BeltGCodeWriter.cpp
is belt-only and merged without conflict, so this only surfaced at build time.
Index them the way the base GCodeWriter does -- .get_at(m_cached_extruder_idx)
and get_abs_value_at(..., m_cached_extruder_idx) -- keeping belt's per-point
first_layer_for_point test rather than the base class's m_is_first_layer.
m_cached_extruder_idx moves from private to the existing protected block that
already exposes writer state to subclasses, so the belt writer resolves the
per-extruder index identically to the base writer instead of guessing one.
Brings the belt-printer work up to date with 591 upstream commits.
Conflict resolutions (12 files, 42 hunks):
- GCode.cpp: adopted upstream's per-filament/per-nozzle config refactor
(get_filament_config_index, NOZZLE_CONFIG), the extracted
generate_timelapse_gcode + farthest-point timelapse, and the
ConfigOptionFloatsNullable calibration options. Re-applied the belt
hooks on top: init_belt_writer / axis remap / FirstLayerPlane setup,
on_set_origin, the belt-corrected calib_z for the volumetric speed
tower, and path_on_first_layer (belt's per-path first-layer test) in
place of upstream's layer-index on_first_layer() in the acceleration,
jerk and overhang-detection paths. Swept upstream's new m_writer.
uses to m_writer-> since belt holds the writer by unique_ptr.
- interpolate_value_across_layers: kept upstream's banded stepping and
belt's object-Z-span ratio; dropped upstream's duplicate ratio decl.
- Plater.cpp: took upstream's guarded add_model(...) early-returns and
the VFA vfa_layer_height plumbing; kept the belt temp-tower path,
_calib_apply_belt_mode and belt_calib_flip_ringing_tower. Dropped the
VFA "cut upper" block, superseded upstream by model scaling.
- Brim.cpp: upstream's ObjectInstanceID-keyed brimAreaMap, keeping the
belt early-return.
- 3DScene.cpp: kept both the belt build-plate tilt up_direction and
upstream's per-extruder printable-height shading.
- GCodeViewer.cpp: kept upstream's dim-previous-layers setup and belt's
exemption from the same-result early return.
- TreeSupport.cpp: upstream's >= 0 roof-layer fix inside belt's
belt-floor branch.
- calib.cpp / GCode.hpp / GCodeWriter.{cpp,hpp} / Print.hpp: upstream's
additions adapted to belt's pointer-held writer and helpers.
- Custom.json: kept profile version 02.04.00.03 (belt) over upstream's
02.04.00.01; both bumped from 02.04.00.00.
Building this tree needs the wxInspector dependency, which upstream
added in the interim (python3 and wxWidgets 3.3.2 were already present
in the shared deps prefix).
* Remove titlebar from splash screen on Wayland
* Broadly check for window decorations and added explanatory description
* Fixed hiding title bar on Wayland for all desktop environments
* Update format
---------
Co-authored-by: noisyfox <timemanager.rick@gmail.com>
* fixes: may be used uninitialized [-Wmaybe-uninitialized]
* fixes: arc_len_next may be used uninitialized [-Wmaybe-uninitialized]
* review result: reverts {} initializer with = to keep code style consistent
LayerResult's second field is typed size_t, so std::numeric_limits::max
should also use size_t and not something related to coordinates for the
layer_id.
# Description
On multi-tool printers using the type 2 wipe tower, the travel to the
tower ignored the configured Z hop type and always used a plain vertical
hop, so the nozzle rose in place over the part and oozed instead of
lifting away with the travel. It now follows the filament's Z hop
setting, matching what the type 1 tower already does.
Only toolchange travels to a type 2 tower change. Normal Lift and z_hop
= 0 are unaffected, and no extrusion moves change in any mode.
# Screenshots/Recordings/Graphs
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
The tower travel took retract()'s default vertical Z hop instead of the
configured one, so the nozzle rose in place over the part and oozed
rather than departing with the travel. Pass the filament's z_hop_types
through, mapping Auto to a spiral lift as append_tcr does.
* Sync WipeTower from BambuStudio(through ca1881761)
* Fix post-slice self-invalidation on custom multi-extruder printers
* Complete the rib wipe tower port in WipeTower2
The rib tower is now always square (prime_tower_width is ignored, as the
GUI already implies), carries the rib origin offset like the BBL tower so
the rib tips sit inside the configured position, clamps the rib length to
the tower diagonal, and extends the ribs for short towers.
* Use the squared rib tower size in arrange estimates
estimate_wipe_tower_polygon reserved the arrange footprint and clamped the
tower X position with the raw prime_tower_width, under-reserving space
whenever the rib wall squares the tower to a different width.
* Print the WipeTower2 shell with a non-support, non-soluble filament
Like the BBL tower: the layer's sparse infill, wall, and brim go to the
first toolchange to a non-support/non-soluble filament, or are printed
with the incoming filament before any toolchange. The minimal-purge
clamp now also covers toolchanges that get no finish-layer saving.
Output is unchanged when no support/soluble filament is used.
* Port the skip-points gap wall to WipeTower2
prime_tower_skip_points was stubbed for Type2 towers: the wall call
hard-coded skip_points=false, the gap cutter received an empty vector,
and append_tcr2 never routed the entry travel. Now the toolchange entry
positions are precomputed from the finalized plan, the wall is cut open
at each entry, and the entry travel approaches around the tower bounding
box through the opening when it starts outside the tower. The geometry
helpers are re-synced with the BBL versions (add_extra_point guards,
per-point side selection). The cone wall keeps its separate path, where
the option stays inert.
Behavior change: non-BBL towers now honor the (default-on) checkbox with
gap walls and routed entries; with the option off the output is
unchanged, and the BBL tower path is untouched.
* Route the in-place toolchange tower entry through the skip-point gap
On multi-tool printers without ramming the tool changes away from the
tower and the entry travel is the tcr's own positioning move, which went
straight across the printed wall. Append the avoid-perimeter path to the
change-filament gcode instead, so the head approaches around the tower
and enters through the wall opening (append_tcr parity).
* Iron the purge start out through the skip-point gap in WipeTower2
Port the BBL tower's entry line ironing: extrude the first 3 mm of the
purge, retract, drag the nozzle 1.5x back out through the wall gap at
F600, creep back at F240 and unretract, so the toolchange start blob
ends up in the gap instead of on the wall. Fires only when the purge
starts at the left-edge entry heading right (in-place toolchangers);
SEMM ram/cooling wipes start mid-box and the priming line has no wall,
so both keep their previous output.
* Reserve WipeTower2 toolchange depth to match the printed purge
The planner reserved ramming rows gated only on enable_filament_ramming and
sized them with the SEMM 0.25s time step, while toolchange_Unload rams on
(semm && enable_filament_ramming) || filament_multitool_ramming with the
multitool time step. Disabling multitool ramming therefore left ~3 unprinted
rows per toolchange as blank bands in the tower. Without ramming the first
wipe line also needs reserved depth of its own (it no longer rides the last
ramming row), plus the y_step/2 offset the wipe start inherits from the
ramming start position - otherwise the tightened boxes truncate the ordered
purge at the box edge.
* Tile WipeTower2 purge rows contiguously across toolchange blocks
Without ramming, each purge block reserved one wipe pitch more than its
rows occupy (ceil+1 rounding plus the ram-geometry start offset), and the
wipe began a full pitch inside the block, leaving a blank band of exactly
two pitches between adjacent blocks. Plan the block as whole wipe rows,
start the first row so the row lattice continues across the block
boundary, and fill the reserved box instead of stopping at the ordered
volume, mirroring how the BBL WipeTower keeps planned depth identical to
printed rows. Ram-printing toolchanges (SEMM with ramming enabled,
multitool ramming) are unchanged.
* Scrub the WipeTower2 toolchange entry with the BBL flat-ironing spiral
The entry scrub now matches the BBL tower's toolchange_wipe_new sequence:
after the ironing drag the retracted nozzle runs a dry expanding-square
spiral centred on the wall-gap entry point before resuming the purge row.
The spiral runs whenever the gap wall is on (disable per filament via
filament_tower_ironing_area = 0); WipeTower2 no longer reads
prime_tower_flat_ironing.
* Restart the WipeTower2 wipe at the box boundary after multitool ramming
With the gap wall on a multi-tool printer, quantize the ram band up to its
whole reserved rows (as the BBL tower does for the old-tool purge) and start
CP TOOLCHANGE WIPE at the left-edge boundary on a fresh row below it instead
of continuing from wherever the ram serpentine ended. The entry scrub then
runs at the wall gap on ram toolchanges too, and the wipe box is whole rows,
so it is filled completely like the no-ram case. SEMM and skip-points-off
behavior is unchanged.
* Move the WipeTower2 wall gap to the wipe start row for ram toolchanges
* code cleanup
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* fix typo
---------
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
# Description
<!--
> Please provide a summary of the changes made in this PR. Include
details such as:
> * What issue does this PR address or fix?
> * What new features or enhancements does this PR introduce?
> * Are there any breaking changes or dependencies that need to be
considered?
-->
This PR updates OTA vendor profile handling and fixes a Windows-only
startup race that could terminate OrcaSlicer silently.
## Changes
- Correct vendor profile version comparison logic.
- Trigger vendor profile synchronization after the startup printer
preset is restored.
- Remove duplicate vendor synchronization from the general startup
updater.
- Replace global temporary archive cleanup with targeted per-vendor
cleanup.
- Add updater-thread exception handling to prevent uncaught filesystem
errors from terminating the process.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
Andrew