The green highlight and tint no longer cover a colour preview, and return while a stroke is
painted. The Fast view also keeps the other parts of a multi-part object.
The new Mixed colors setting caps how many mixed filaments a bake adds. They are picked from the
texture's colours, and only the ones the bake paints with are created. Previewing no longer creates
filament slots, both previews show a mix in its slot's colour, and the bake paints each mix with the
slot it actually got.
* Block undo and redo while a background job runs
A job is queued against the model as it stands and hands its result back
when it finishes, so undoing underneath it leaves that result landing on
geometry it was never computed for. Undo and redo now wait for the job
and say so, and can_undo()/can_redo() report the same, so the toolbar
and the menu items stay in step.
* Say what to do about the running operation, not just that it blocks
Review feedback: "Stop it first" is the only way out the old text offered,
and stopping is rarely what the user wants. Waiting for the operation to
finish works just as well, so the notification now names both.
A `<metadata>` element without a `type` attribute makes
`get_attribute()` return nullptr, which was then assigned to a
`std::string` and read as a C string.
Check it the way the sibling metadata handler already does, and stop the
parse.
Regression test in `tests/libslic3r/test_amf.cpp`, a new file: the suite
had no AMF test at all.
# Description
Belt printer support is now part of `main` (#14394), so the separate
`_belt` nightly builds from the `belt-printer` branch are no longer
needed. Nightly builds are published from `main` only again, under their
usual names. The README drops its section on the parallel belt builds
and lists belt printer support among the main features, crediting its
main author, Joseph Robertson (@HarrierPigeon). The nightly release page
has already been updated to match.
No change to slicing output or to main's nightly asset names — CI and
README only.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
# Belt printing for OrcaSlicer
This merges the `belt-printer` branch into `main`. It adds support for
conveyor-belt ("infinite Z") printers like the BabyBelt Pro, the
IdeaFormer IR3 V2 and the CR-30 family, along with the things that had
to grow around it: tilted-plane slicing, supports that terminate on the
belt, belt-aware brims, a purge tower that works without a flat bed,
multi-colour belt prints, a preview that shows the part the way it was
designed, and starter profiles.
It has been a long road (the first attempt was #12733 back in March, the
pipeline has been rebuilt twice since) and a lot of people have put work
into it. Credits are at the bottom; please tell me if I've missed
anyone.
Closes#2628, closes#11344, closes#6885, closes#9004, closes#14188.
---
## How belt printing works
Slicers assume the bed sits on the XY plane and layers stack along Z. A
belt printer breaks that in two ways at once: the belt is tilted
(usually 45°) and the axis that advances the belt is the printer's Z, so
the "bed" lives on the XZ plane and is, in principle, infinitely long.
<img width="6360" height="2702" alt="A flat bed vs a tilted belt"
src="https://github.com/user-attachments/assets/3f5542f2-6dab-42bf-9233-f96d863b40c8"
/>
Rather than teach every part of the slicer about tilted beds, the branch
leaves the slicing engine alone and transforms what goes in and what
comes out. The pipeline has five steps.
<details>
<summary><b>The five steps in detail</b></summary>
### 1. Pre-slice rotation
The mesh is rotated by the belt angle before slicing
(`BeltSliceStrategy`, `BeltTransform`), so that the ordinary horizontal
slicer produces layers that are actually tilted planes relative to the
part. Rotation is about X by default (belt along Y); Y rotation and a Z
lift are supported too. A "global" mode rotates every object about one
common origin, which is what keeps several parts on one belt consistent
with each other.
### 2. Slice
Nothing special. The mesh is rotated, the slicer does what it always
does. This is the reason most of Orca's features (walls, infill, seams,
ironing, painting, …) just work on a belt without belt-specific code.
### 3. Supports
Supports are generated after slicing against a virtual floor: the belt
surface, expressed in the rotated frame (`BeltFloorContext`). Normal,
tree and organic supports all terminate on that plane instead of on Z=0,
and nothing may be generated below it. Painted supports and seams are
transformed with the same `trafo_sliced()` as the layers.
### 4. G-code back-transform
The G-code is rotated back into the model's Cartesian frame
(`BeltBackTransform`). A nice side effect: with step 5 switched off you
can slice at a non-standard angle and print the result on a normal
printer. The first belt-sliced Benchy was printed exactly that way, on a
Sovol SV08.
### 5. Machine frame
The printer doesn't know its bed is tilted. To make straight walls come
out straight, the axes are remapped (the default mapping is X → reversed
X, Y → Z, Z → Y) and the result is sheared and scaled:
```math
\begin{bmatrix} X \\ Y \\ Z \end{bmatrix}
\longrightarrow
\begin{bmatrix} X \\ \dfrac{Y}{\cos\alpha} \\ Z + Y\cdot\tan\alpha \end{bmatrix}
```
This lives in `GCodeWriter` behind a small `MachineKinematics` strategy
(`BeltKinematics` on belts, identity otherwise), so the writer itself
has one code path. The slicing angle and the machine angle can differ if
you want to, e.g. slice at 30° on a 45° machine — mind your nozzle
clearance if you do.
</details>
A short recording of the back-transform from the original PR:
https://github.com/user-attachments/assets/cdb9cc83-711d-48b7-9d86-a014a32c5e8e
---
## What had to change to make it work
Belt mode is gated on the `belt_printer` printer setting; with it off,
every code path below is the old one.
<details>
<summary><b>Slicing and geometry</b></summary>
- `PrintObjectSlice` / `PrintObject`: the rotation, Z lift and
per-object layer-grid shift, plus the invalidation that goes with them.
Modifiers and painted volumes are transformed with the same matrix as
the model.
- `FirstLayerPlane`: "the first layer" on a belt is a band along the
belt, not the first slicing layer. First-layer speed, line width and the
fan band are measured against it.
- `Print::validate`: clearance checks against the gantry instead of the
printable height; skirt, raft, draft shield, the classic prime tower,
arc fitting, spiral vase with brim, and scarf-joint seams are refused or
disabled on belts because each of them either doesn't exist on a belt or
moves the belt the wrong way (a scarf seam starts one layer low, which
on a belt is a 0.28 mm back-step into the previous layer at every seam).
- Z-hop defaults to 0 on belt profiles; a lift on a belt is a belt move.
</details>
<details>
<summary><b>Supports</b></summary>
- `SupportMaterial`, `TreeSupport`, `TreeSupport3D`, `TreeModelVolumes`:
a shared `BeltFloorContext` provides the belt plane; supports clip to
it, extension layers are numbered sequentially, and the first-layer
flange that used to be stamped under everything is gone.
- `build_plate_tilt_x/y` (from #12733) is now derived from the slicing
rotation in `Print::apply`, so GUI and CLI agree; it's capped below 90°.
- Organic supports that reach the belt no longer produce negative flow.
</details>
<details>
<summary><b>Brims (#15155)</b></summary>
A belt first layer is effectively a single line of contact, so a brim
matters more than usual. `BeltBrim` generates per-layer bands along the
belt plus an "apron" ahead of the part, in the object's brim filament.
Two belt-specific settings came with it: **Leading edge brim length**
(more lines on the side printed first) and **Extra brim width** (across
the belt), plus a **Leading edge only** brim type.
<img width="1849" height="1043" alt="belt brim"
src="https://github.com/user-attachments/assets/f963ed8e-53e7-48f8-a495-123cb9ae27f7"
/>
</details>
<details>
<summary><b>Multi-colour: the belt purge tower</b></summary>
The classic wipe tower can't exist on a belt (its G-code bypasses the
transform and it needs a flat bed to stand on). Instead the GUI
generates a long, thin "purge prism" beside the parts, flush with the
far edge of the belt, one per plate (`BeltPurgeTower.cpp`). It is a real
model object, so it is sliced like everything else, and
`Print::_plan_belt_purge` routes every filament change into it via
`flush_into_objects`. It's sized from the flush matrix, split into one
island per simultaneous tool change, snapped onto the parts' layer grid,
cut off after the last colour change and stripped of infill no change
claimed, so what prints is a good deal smaller than the model you see in
Prepare.
</details>
<details>
<summary><b>G-code generation and cooling</b></summary>
- `GCodeWriter` + `MachineKinematics`/`BeltKinematics`: the
back-transform, axis remap, shear and scale, lifts that are belt moves,
and the first-layer travel speed.
- `GCode.cpp` / `BeltGCode`: a belt header (slicing rotation, remaps,
machine tilt) that the preview reads back; it is written outside the
optional header block so printers with a BTT TFT thumbnail still get it.
Exclude-object outlines are emitted in the plate frame.
- `CoolingBuffer`: the "first layers" the fan stays off for are a band
above the belt, marked per extrusion segment by the generator
(`;_BELT_BAND_START/END`) and honoured on every layer.
- `GCodeProcessor`: belt header parsing, start-G-code Z handling, and
height checks that don't compare belt travel against the printable
height.
- `ToolOrdering` / `BeltPurge`: filament changes are detected by
scanning the ordering (an apron layer never carries the first-layer
flag).
</details>
<details>
<summary><b>GUI</b></summary>
- Printer settings tab: the belt group (slicing rotation, angle, global
mode, infinite Y, purge tower, floor settings). The axis remap and
pre-slice remap options are Develop-mode only.
- `ConfigManipulation`: everything that doesn't apply on a belt is
greyed out (skirt, raft, draft shield, the wipe tower group, scarf
seams, …).
- Preview: a "designed view" that back-transforms the toolpaths onto the
model so you see the part upright, with `B` toggling the raw
machine-frame G-code (`GCodeViewer`, `Shortcuts`). The tilt comes from
the belt header, so imported G-code behaves.
- Arrange: parts are packed from the end of the belt that prints first,
colours are grouped into runs so each filament change happens once, the
purge tower's strip and the brim width are reserved, and piles aimed at
an off-centre `best_object_pos` are clamped to the bed (`Arrange.cpp`,
`ArrangeJob.cpp`, one clamp in `libnest2d`).
- `PartPlate`: plate icons stay in the gap between plates on a long,
narrow bed; the plate is open along Y for containment tests on an
infinite-Y belt.
- Calibration: a belt temperature tower (overhang variant) that slices
correctly on a tilt.
- The old tilted-bed rendering in Prepare was dormant and has been
removed; the bed is shown as the slicing pipeline treats it.
</details>
<details>
<summary><b>Config options</b></summary>
Printer: `belt_printer`, `belt_printer_infinite_y`,
`belt_slice_rotation`, `belt_slice_rotation_angle`,
`belt_slice_rotation_global`, `belt_preslice_global`,
`belt_frame_tilt_decouple`, `belt_frame_tilt_angle`,
`belt_support_floor_mode`, `belt_support_floor_offset`,
`belt_support_z_offset_mode`, `enable_belt_purge_tower`,
`first_layer_plane`, `first_layer_plane_offset`,
`first_layer_plane_thickness`, `build_plate_tilt_x/y`,
`gcode_back_transform`, `gcode_remap_x/y/z`, `preslice_remap_x/y/z`,
`preslice_remap_global`.
Process: `belt_purge_tower_width`, `leading_brim_length`,
`extra_brim_width`, brim type `leading_edge_only`. Object:
`belt_purge_tower_object`.
All of them have defaults that leave non-belt printers untouched, and
old `belt_support_floor_mode` values map to `none`.
</details>
<details>
<summary><b>Tests</b></summary>
`tests/libslic3r/test_belt_brim.cpp` and `test_arrange.cpp`, and belt
cases in `fff_print` (`test_print.cpp`, `test_skirt_brim.cpp`,
`test_gcodewriter.cpp`, `test_gcode_processor.cpp`): scarf gate, fan
band, gantry clearance, organic supports on the belt, brim with and
without the purge tower, apron widths, machine mapping at non-45°
angles, first-travel lift, start-G-code Z, arrange clamp and colour
grouping. All three suites pass on Linux, and the tree-wide profile
check passes.
</details>
---
## Starter profiles
Three vendors ship belt profiles. Belt mode needs the printer settings
at **Advanced** or above to show its group.
<img alt="advanced mode"
src="https://github.com/user-attachments/assets/7a519ce5-b3b5-400c-a914-4f208bb577b0"
/>
| Printer | Vendor bundle | Nozzles | Processes | Filaments |
|---|---|---|---|---|
| **Generic Belt Printer** (`MyBeltPrinter`) | Custom | 0.2, 0.4, 0.6,
0.8 | 0.20mm Standard, 0.12mm Fine | library |
| **BabyBelt Pro** (Printcepts) | Printcepts | 0.4 | 0.20mm Standard |
Generic PLA, Generic PETG, eSUN PLA |
| **IdeaFormer IR3 V2** | IdeaFormer | 0.4 | 0.20mm Standard | Generic
PLA, Generic PETG, eSUN PLA |
To set up a printer that isn't listed: pick **Generic Belt Printer**,
set the belt width and length, save the profile, then copy in your
machine's start/end G-code and limits and tune from there.
<img alt="generic belt printer"
src="https://github.com/user-attachments/assets/90134d55-d6fe-4dba-8695-5ea44e78ec2b"
/>
<details>
<summary>BabyBelt Pro</summary>
<img width="2467" height="1392" alt="BabyBelt Pro"
src="https://github.com/user-attachments/assets/2b448cee-339e-43c9-964b-1ee9044044c7"
/>
</details>
---
## Contributions
### @HarrierPigeon
***Majority of design & implementation***
I did most of the work here by myself with AI tools (primarily Claude,
some Codex.)
PRs #12733, #12998, #14385, #15155, #15361, #15156, #15526, #16127
### The @Unlayered3D Team
***Rotation-Mode Pipeline***
The initial version of this sheared the model in the pre-slice pipeline.
Talking with them convinced me to switch to the current
rotate->slice->unrotate-> remap & shear method, which had significant
immediate improvements. Working with them has been a blast.
### @tommasobbianchi
***IdeaFormer IR3V2 Profile, eSUN PLA Tuning, G-Code Render / Preview***
TommyB came in at the perfect time to help keep me motivated and
contributed several things I hadn't had the werewithal to implemement
yet. Without their contributions and encouragement, we wouldn't be here
yet.
### The BabyBelt Community
**BabyBelt Pro** — @rexit1982 for the profile, and @RobMink of
Printcepts for the printer and a lot of patient testing.
**Field reports** — Many members of the BabyBelt community helped,
testing on their machines, providing G-Code and examples of issues, and
encouraging me to keep working on it. Among them:
- @RobMink - creator of the BabyBelt
- @rexit1982 - initial BabyBelt Pro profile, bug hunter
- @shubhracc - found a *lot* of technical bugs
- @NeoDLC - bug hunter
and BabyBelt Discord members who found bugs & gave feedback in no
particular order:
- @horatio42 - also provided a build machine while mine was down
- @HotCubCar - requested belt printer brim support
- Swap_File
- @Nyctelios
- Sup
- @matschi140
- @Rise-Run
- @shooby-dooby
### OrcaSlicer Maintainers
**Generic belt printer** — @SoftFever
**Keeping on top of upstream** @RF47 & @HanifKoh
**Review and fixes** — @HanifKoh (#15685 and the review on this PR).
Among them: plates after the first printed off the bed on belts; painted
supports and seams ignored the belt transform; support generation failed
at a 90° tilt; the object table crashed on the Support column on every
printer because tilt keys were in the per-object tables; apron brims
printed in the wrong filament; `build_plate_tilt` went stale outside the
GUI; the CLI reserved a wipe tower on belts; every G-code file was
treated as belt G-code because the config block carries the angle; tests
didn't compile on Clang/MSVC; plus a long list of smaller clean-ups and
the review questions that led to the clearance check, the header length
fix, the retired floor modes and the removal of the diagnostic logging.
### Additional Thanks
A special thanks to LDO Motors, who provided equipment for validating
multicolor, and my wife, who not only put up with with this obsession,
and the addition of three belt printers to our home, but has encouraged
me to keep going ever since I started this project six months ago.
---
## Known Issues
- The purge prism's first tool is chosen by the shared `ToolOrdering`
logic; on some layouts the print opens on the wrong filament and makes
one extra change at the thin tip of the prism (the "cannot absorb the
full purge volume" warning at a low height).
- Colour grouping in arrange is a soft cost: when the belt is too short
for clean runs, colours overlap rather than spill onto another plate.
- Three OrcaFilamentLibrary filaments still carry `filament_z_hop` 0.4;
belt profiles override it to 0.
Also: slicing at an angle other than the machine's (decoupled frame
tilt) is supported but not something the starter profiles exercise.
## Summary
Fixes#15944.
The plugin audit deny-list matched `secret`, `cert`, and
`conf` as substrings of every path component. This blocked
valid imports during plugin capability execution, for example
`numpy/__config__.py`, because `conf` appeared inside the
module filename.
This PR changes deny keyword matching to use whole path
components instead of substring matches. It keeps the
intended protections for sensitive locations and config
files, while allowing dependency and stdlib modules whose
names merely contain those strings.
## Changes
- Match denied path keywords as whole components instead of
substrings.
- Keep denying sensitive directory names such as:
- `secret`
- `secrets`
- `cert`
- `certs`
- `certificate`
- `certificates`
- `conf`
- `config`
- Keep denying config files by extension:
- `.conf`
- `.ini`
- Allow legitimate Python module/package paths such as:
- `numpy/__config__.py`
- `numpy/_core/_ufunc_config.py`
- `configparser.py`
- `sysconfig.py`
- `logging/config.py`
- `certifi/cacert.pem`
- Include the denied target and reason in `PermissionError`
messages when the audit hook blocks an operation.
- Remove an unused `<memory>` include from
`PluginAuditManager.hpp`.
## Why
The previous substring matching caused false positives for
common dependency and standard-library paths. It also made
failures hard to diagnose because the Python exception did
not include the refused path.
The new behavior is narrower: it blocks sensitive path
components and config file extensions without treating
unrelated names like `__config__.py`, `configparser.py`,
`Conference`, or `Concert` as secrets.
## Testing
- Added/updated unit coverage in
`tests/slic3rutils/test_plugin_audit.cpp` for:
- whole-component keyword matches
- `.conf` / `.ini` blocking
- case-insensitive matching
- false-positive paths from #15944
Plugin used for testing:
[orca_audit_numpy_config_repro.py](https://github.com/user-attachments/files/33143848/orca_audit_numpy_config_repro.py)
Make the connected-net layout affordable on a dense patch
Laying a patch out as a connected net cost ~175 ms on a 42k-triangle patch,
against ~21 ms for the unwrap it works from, and the gizmo asks for it on every
preview, overlay and bake. Measured on a real project the grid behind it ran
~19 million triangle-pair tests per net, nearly all of them misses: a cell
holds every triangle whose box touches it, and a candidate really meets a
couple of them.
Keep a bounding box with each stored triangle and answer those misses with four
comparisons instead of a full intersection. The net drops to ~53 ms with
identical output - the seam metrics on the test project did not move by one.
Two further attempts were measured and dropped, and are recorded in the comment
so they are not tried again: a free-space pre-check per chart came out slower,
because a folded chart lands against the net by construction and the cells
under it are occupied anyway, and splitting the boxes into their own array for
locality lost more to growing two vectors per bucket than it gained.
Also pick a pair's fold line from the longest boundary they share rather than
whichever edge came first, and grow the net strongest-adjacency-first rather
than breadth-first by area. Only the fold a chart is reached by comes out
matching, so a chart claimed across a short boundary leaves the long one it
shared with its true neighbour torn.
texture_unwrap_dump reports an unwrap from a saved project - charts, their
topology, folded triangles, where the texture is discontinuous and how long
those seams are. All of the above was found with it, and it is what keeps a
claim about this code honest; reading the 3D view and guessing had produced
three wrong diagnoses in a row.
* Explain the texture displacement views that cannot be used, and show them
Checker and Distortion are views of a layer's unwrap, so they mean nothing on
any other mapping - but they were offered on all of them and simply drew
nothing when picked. Fade them out on anything but Unwrap (LSCM), with the
reason in the tooltip, and have a click bring the UV editor up on the view it
selected, since that pane is where the unwrap is actually worked on.
Neither view was visible even when it did apply. The overlay is built from the
base patch and drawn with a polygon offset, which biases depth values rather
than moving geometry, so it cannot win against the displaced preview standing
in front of it. Leave that preview out while a UV-check view is on and draw the
undisplaced surface instead, which is what the offset assumes and what the
mapping being inspected belongs to.
In the UV editor, a tool that cannot be used right now is faded rather than
disabled. A disabled window gets no mouse events on GTK or MSW, so every one of
those tools - Cut, Join, Unjoin, Clear seams, Clear UV edits, the select modes,
Snap, Frame - silently had no tooltip in the state where the user most needs to
know what is missing. Each now says what to do instead. The tile size, the
island statistics, the status line and the three select modes gained tooltips
of their own; the select modes now name the gestures they enable, which were
documented nowhere.
* UV editor: keep the mouse capture balanced
The canvas captured the mouse on every button press without checking whether
it already held one, released it in a single place, and handled no capture
loss at all. Two sequences leaked a capture: pressing a second button during a
drag nested a second one that the single release on button-up could not undo,
and a modal R/S skipped that release entirely while waiting for a confirming
click that may never come.
A leaked capture is not a local problem on macOS, where wxEVT_MOUSE_CAPTURE_LOST
is never sent and nothing recovers it. While any wx window holds a capture,
wxOSX routes every mouse event to that window and never calls through to
NSWindow, so the application stops seeing motion and enter/leave, and native
tooltips stop appearing anywhere in it.
Capture through grab_mouse()/drop_mouse() so there is at most one, give it back
on any button-up including a modal gesture (which tracks the pointer and needs
no capture), and cancel on wxEVT_MOUSE_CAPTURE_LOST: commit nothing, put back
what a modal rotate or scale already applied, and do not release a capture that
is already gone.
---------
Co-authored-by: ExPikaPaka <mrfsfyt@gmail.com>
* Fix a crash on loading a 3MF with empty project settings
opt_float() dereferences what option<>() returns without checking it, and
option<>() is called with create = false. Three CLI sites read printable_height
that way, so a 3mf whose Metadata/project_settings.config holds an empty object
takes the CLI down with a null dereference. Both models shipped in
resources/handy_models are such files, so `--info` on either of them segfaults.
Guard the three reads the way the neighbouring reads of
extruder_clearance_height_to_rod and friends already are. All three target
variables are initialised to 0 and the consumer tests for > 0, so an absent
setting already had a defined meaning and nothing changes for a project that
carries the setting.
* Add a CLI regression test for a project with empty settings
Runs --info over a copy of a shipped model whose Metadata/project_settings.config
has been rewritten to an empty object, so the test keeps covering the crash no
matter what settings the shipped models carry later.
Verified both ways: the test passes against this branch and fails with a
segmentation fault against a build without the guards.
---------
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
libpng reports a bad file by longjmp()ing back to the buffer set with
setjmp(), and the frame it lands in must own nothing that needs
destroying: with exceptions enabled MSVC unwinds the stack as part of
longjmp, and returning from a frame unwound that way crashes. It did on
Windows while working everywhere else.
The read callback also returned quietly on a short read, leaving libpng
to decode whatever happened to be in the output buffer.
The calls that can fail now sit in two helpers that own nothing but
pointers, so every C++ object the decoders need stays in their own
frames, and a short read is reported through png_error().
Every BambuStudio project opened with a "BambuStudio Project" info dialog
(or, from BambuStudio 2.8.2, one saying the file is newer than the
compatible version and to update the software), followed by the
configuration-substitution dialogs for the project and its embedded
presets. None of them asks anything and all of them fire for every
BambuStudio file.
For BambuStudio projects (untagged files newer than 2.3.2, the existing
test) log the version with the unrecognized settings, and each replaced
value, instead. The geometry-only, invalid-values and G-code safety
dialogs stay, and other 3MFs are unchanged.
The Slice-plate hover popup (FilamentGroupPopup, a wxPopupTransientWindow)
takes the mouse capture while it is shown, and on macOS its OnIdle handler
reacquires that capture whenever the cursor sits outside the popup. If the
popup is still shown when the modal filament grouping dialog opens, wx routes
every dialog mouse event to the now-hidden popup, because WX_filterSendEvent
short-circuits to the capture window while GetCapture() is non-null. The
dialog's filament blocks never receive a mouse-down, so they can't be dragged
and the whole app looks frozen even though its modal loop is healthy and the
keyboard still works.
Dismiss the popup synchronously before the dialog opens: Dismiss() hides it
and releases the capture, and hiding it stops OnIdle from reacquiring. This is
a no-op where the popup is never shown (Linux, where the hover popup is
disabled, and any non-dual-nozzle printer).
## Description
Addresses the three items in @raistlin7447's review of 2026-10-08 on
#14394
(https://github.com/OrcaSlicer/OrcaSlicer/pull/14394#pullrequestreview-5459955028),
one commit each.
**Leading-edge brim with a leading overhang (BeltBrim.cpp).** The
leading-edge cut was taken at the first layer with geometry. With an
overhang on the leading side that layer is the overhang's tip, which is
sliced before the part reaches the belt and does not touch it, so the
cut lay ahead of the part. Reproduced on the BabyBelt profile with a 20
mm cube and a fin over its leading end, leading brim length 10 mm, width
5 mm:
| Part | Leading-edge brim before | After |
|---|---|---|
| Plain cube | 53 brim lines | 53 (unchanged) |
| Cube + 30 mm fin | 9, a sliver well ahead of the part | 53 |
| Cube + 40 mm fin | none | 53 |
| Cube + 30 mm fin, leading length 0 | none | 18 |
As suggested, the cut now uses the first layer whose contact band in the
footprint loop is non-empty: the loop records it while it builds the
footprint.
**Dead empty-layer drop (GCode.cpp).** The by-layer
`collect_layers_to_print()` built its groups only from the per-object
entries, and the per-object overload already drops every belt entry that
prints nothing, so the group-level drop could never remove anything.
Removed; its explanation moved to the drop that does the work. No output
change.
**First-layer point test comment (GCode.cpp).** Reworded to say what the
lambda undoes (what `point_to_gcode()` added and the writer took off),
since on a belt `m_origin` is rotated by `on_set_origin()` and is not
"the instance part". Comment only.
## Tests
- New test "Leading-edge-only brim ignores an overhang ahead of the
part" (30 and 40 mm fins): the leading-edge brim of the cube with the
fin must match the plain cube's. Fails without the fix (plain 53 brim
layers vs 10 and 0 with the fins), passes with it (53 and 53).
- `fff_print_tests` 364 cases and `libslic3r_tests` pass.
- Before/after G-code on the current `belt-printer` head (baseline built
from it, both binaries run from the build tree with the same resources):
byte-identical for a multi-color belt project, a two-filament belt
project with the belt purge tower, two cubes printed by object, a
flat-bed organic-support project, and two plain-cube leading-edge brims.
Only the three overhang cases change, as in the table.
- `OrcaSlicer_profile_validator -s` on Printcepts, IdeaFormer, Custom
(belt) and Prusa (control): clean.
- `scripts/clang_tidy_diff.py` against `belt-printer`: clean.
Unrelated, noticed while comparing outputs: `PrintObject::m_id`
(Print.hpp) has no initializer, so on the CLI path the `; printing
object ... id:` labels can carry an arbitrary value that differs between
builds. Pre-existing; not touched here.
OS: Linux (Ubuntu), GCC, local build. Written with AI assistance (Claude
Code); every change reviewed and tested locally as listed.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
The comment said the lambda takes off "the instance part" of m_origin.
On a belt m_origin has been rotated by on_set_origin() by then, so
m_origin minus the plate offset is not the instance shift. Say what the
code does: undo what point_to_gcode() added and what the writer took
off. Comment only.
Reported by raistlin7447 in the review of #14394.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The by-layer collect_layers_to_print() dropped every merged layer group
in which nothing prints, and the per-object overload drops every belt
entry that prints nothing. The merged groups are built only from the
per-object entries, so after the second drop every group holds at least
one entry that prints and the first never removed anything. Remove it
and keep its explanation at the drop that does the work. No output
changes.
Reported by raistlin7447 in the review of #14394.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The leading-edge-only brim is the outer brim cut down to the part's first
contact with the belt. The cut was taken at the first layer with
geometry, but with an overhang on the leading side that layer is the
overhang's tip, which is sliced before the part reaches the belt and
does not touch it. The cut then lay ahead of the part: a 30 mm fin
left a sliver of brim well ahead of a 20 mm cube, and a 40 mm fin, or a
leading brim length of 0, left none at all.
The footprint loop already finds the layers that touch the belt (their
contact band is not empty); record the first of them and cut there.
The new test slices a cube with and without a 30 or 40 mm fin over its
leading end and checks that the leading-edge brim is the same. It fails
without the fix.
Reported by raistlin7447 in the review of #14394.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
* build_linux.sh: add -J to build several dependencies at once
The top-level deps build is fixed at -j1, so one dependency compiles at a
time while the small ones leave most cores idle. -J N raises that level.
-j still applies in full to each dependency, so the worst case is -J times
-j compile jobs: ninja has no job server to share a pool across the nested
builds. Without -J nothing changes.
* Quote the job count for shellcheck (SC2086)
---------
Co-authored-by: ExPikaPaka <mrfsfyt@gmail.com>
SoftFever