* Move Generic vendor above Bambu vendor in AMS material setting.
* Remove hardcoded sorted_names. Alphabetically sort Bambu with all vendors
* Fix sorting with case insensitive comparison
* Use arithmetic to get rank distance because priorities are stored in a vector. This lets us remove the <interator> include.
* Move currently active filaments added to the Prepare sidebar to the top of the AMS Material Selection combo box.
It is likely the user wants to set the material to the currently active filament.
* Reduce logging verbosity.
* Refactor current active preset filament finding to find nested preset inheritance.
* Initialize pointer to null before usage.
* Remove old commit code
* Remove new line
---------
Co-authored-by: Ioannis Giannakas <59056762+igiannakas@users.noreply.github.com>
Co-authored-by: yw4z <ywsyildiz@gmail.com>
* Fix detached copies of system presets
* Clarify detached preset compatibility
* Show unique preset state in save dialog
* Update SavePresetDialog.cpp
---------
Co-authored-by: yw4z <ywsyildiz@gmail.com>
* fix(GUI): honor "Ignore" when layer height exceeds the configured maximum
Entering a layer height above the printer's max_layer_height on the Print
Settings tab fired two guards in sequence. Tab::on_value_change prompts
"...Adjust to the set range automatically?" with an Adjust/Ignore choice, and
ConfigManipulation::update_print_fff_config then showed an OK-only "Too large
layer height. Reset to X" dialog whose result was never checked, so it always
reset the value. The second guard overrode the user's "Ignore", resetting the
layer height regardless.
Changes:
- Extract the shared Adjust/Ignore dialog into
ConfigManipulation::layer_height_out_of_range_dialog, reused by the tab
(Tab::on_value_change) and the per-object/part settings panels. The dialog now
names the value it will clamp to and reads correctly for too-low as well as
too-high.
- The tab/plate path is already covered by Tab::on_value_change, so the
duplicate reset is dropped from update_print_fff_config.
- The per-object/part panels have no on_value_change hook, so add
ConfigManipulation::check_object_layer_height and call it from the object
settings update paths, gated on the edited option (changed_opt_key ==
"layer_height"). It prompts once per layer-height edit and does not re-prompt
when unrelated object settings change after the user chose "Ignore".
Fixes#14214
* refactor(GUI): unify the layer-height range check across tab and object panels
Copilot review of #14369 noted that the per-object check only guarded the
max at extruder 0 and skipped the too-low case, diverging from the tab.
Move the whole range check into ConfigManipulation::check_layer_height,
used by both Tab::on_value_change and the per-object/part panels. It takes
the widest [min, max] window across the printer's extruders, offers
Adjust/Ignore in both directions, and resets a near-zero value. The tab's
inline block collapses to one call, dropping the duplicated limit logic.
* fix(GUI): only enforce layer-height limits that are actually set
max_layer_height defaults to 0 (unset), so the unconditional range check
offered to clamp any layer height to 0 on presets that don't define it.
Guard each branch (near-zero, too-high, too-low) so an unset limit disables
that direction; the slice-time nozzle-diameter check still applies.
Also run check_layer_height before update_print_fff_config in the object
panels so a near-zero per-object value prompts the same way the tab does,
with update_print_fff_config's fallback still covering the no-minimum case.
_update_select_plate_toolbar_stats_item(true) runs from
on_action_slice_all before the select-plate toolbar has necessarily been
initialized. m_all_plates_stats_item is only assigned in
_init_select_plate_toolbar, so slicing a multi-plate project shortly
after startup (before the Preview tab has rendered) leaves the pointer
null while show_stats_item is true, and the branch dereferences it,
crashing with SIGSEGV.
Every other dereference of this pointer already null-checks it. Add the
same check here so the all-plates stats item is left unselected until the
toolbar is initialized instead of crashing.
Fixes#15116
min_length_factor and is_top_or_bottom_layer had no default initializers, and the FillConcentric/FillConcentricInternal callers never set them, so WallToolPaths::removeSmallLines() thresholded on stack garbage. Which short extrusion lines it dropped then depended on memory layout, so concentric solid-infill output was nondeterministic between runs and across machines. Give every member a default, matching the adjacent FillParams. The perimeter path was already fine because it builds the struct via make_paths_params().
Fix Windows crash in Replace all with 3D file
Keep the replacement result message as wxString and substitute the volume
name directly.
On Windows, wxString::ToStdString() cannot encode the Unicode status icon
through the active ANSI code page and returns an empty string. Passing that
empty string to boost::format with a volume-name argument throws
boost::too_many_args and exits OrcaSlicer.
- Emit coincident belt_brim_by_layer bands even when the leading object layer
has no InstanceVisit (zero-extrusion lead-in / no coinciding support), so the
brim at first belt contact is no longer dropped.
- Register each coincident band's brim filament in ToolOrdering and emit each
band exactly once, in its brim-filament pass; emit ordinary-layer aprons in
the brim pass before object extrusion (correct tool, brim-first) instead of
with whatever tool was active.
- has_belt_brim(): inner-only brims need brim_width>0 (leading/extra produce no
inner geometry), fixing spurious prime-tower/spiral rejection; mirror in
wants_brim. Single-extruder/single-object output is unchanged except
previously-dropped bands now print.
- BeltGCodeWriter::travel_to_xyz final branch used config.travel_speed
instead of the computed first-layer-aware travel_speed.
- extrude_to_xyz decided emit_xyz vs emit_xy from pre-remap Z; emit full
XYZ whenever an axis remap is active so remapped machine-Z is never
dropped.
- base travel_to_xyz now applies apply_axis_remap() on all emitted
destinations (standalone remap on non-belt printers was unremapped).
- spiral/arc travels fall back to normal linear lift under active remap
(endpoint-only remap can't preserve arc plane/I-J).
- set_axis_remap() is now synced unconditionally each export to avoid a
reused writer retaining a stale non-identity mapping.
update_fff() zeroed any build_plate_tilt matching the dormant belt-derived
tilt (default X/45) within 0.01, wiping a legitimate manual tilt on a
non-belt tilted-bed printer. Track the belt->non-belt transition and the
exact values belt-sync wrote, clearing only those on an in-place toggle;
reset tracking on preset load so preset switches never wipe tilt.
select_facets_by_angle replaced upstream's limit.dot(down) threshold with
cos(threshold), changing facet selection for non-uniformly-scaled/mirror
objects on ALL printers. Restore the exact upstream computation when no
build-plate tilt is active; keep the tilted-gravity form only under tilt.
Belt slope-shading changes recomputed up_direction (with a printer-preset
config lookup) and normal_z per volume; both are frame-invariant. Compute
once before the to_render loop and reuse the already-hoisted
support_normal_z. Uniforms are still set per volume; visuals unchanged.
SupportMaterial::detect_overhangs copied lower_layer_polygons per region
even without build-plate tilt; hoist the tilted copy out of the region
loop and use the original polygons directly when untilted. TreeSupport3D
flattened lslices_extrudable to Polygons unconditionally; restore the
upstream ExPolygons offset on the untilted path.
The 2-node merge moved the two valid=false writes outside the mutex that
upstream held together with the contact_nodes push_back; restore a single
critical section per branch (belt branch also guards to_buildplate).
Remove an unused top_interface_layers local in drop_nodes.
reset() cleared the sibling machine_frame_transform_active but not
belt_tilt_angle/belt_z_origin/preslice_remap_*; a reused result carried
stale belt metadata into a subsequent normal print, flipping the store_z
branch and corrupting start-gcode preview Z for non-belt prints.
Non-belt branch of set_bed_shape reset only the 3DBed renderer, not the
BuildVolume; Bed3D::set_shape early-returns on unchanged bed, so a
belt->normal switch or in-place belt toggle-off left the BuildVolume with
m_is_belt_printer=true and inflated Y bounds -> out-of-bounds objects
treated as printable on a normal printer.
Prime towers reserved depth from the prime volume alone, ignoring the flush
matrix: rib-wall towers in both the engine and the preview, and rectangle and
cone towers in the preview, which never carried the flush-aware estimate the
engine already used. The preview also read the print preset, which does not
carry the printer- and filament-scope keys the estimate needs and so silently
fell back to defaults. On multi-nozzle printers the flush matrix, which holds
one block per nozzle, was additionally read as a single block. The tower could
come out too small for the purge it has to hold.
The flush-based estimate also skipped the height-based minimum depth that the
prime-volume one applies, so low-flush prints could estimate a tower shallower
than the one that actually gets built.
"Leading edge only" describes where a part meets a moving belt, so it has no
meaning on a fixed bed and should not clutter the Brim type dropdown there.
Filtered the same way support_style and wipe_tower_wall_type already are a few
lines above in TabPrint::toggle_options(): the field holds its own copy of the
option definition, and Choice maps the combobox selection straight onto that
copy's enum_values, so rewriting the values, the labels and the combobox items
together keeps the mapping correct.
The entry is kept when it is the current value, so opening a project that uses
it on a non-belt printer cannot leave the control displaying an option it does
not offer - which would silently rewrite the setting on the next edit.
Print::validate() already warns that it prints as an ordinary outer brim there.
Matches the scope of the existing precedents: the per-object override panel is
not filtered.
The placement clamps and the tower-approach router both stood in the bed's
bounding box for the bed itself, so on a delta or hexagonal bed the prime tower
could be parked in a corner that does not exist and the nozzle could be routed
across it. Both now test the real printable outline, slicing reports a tower
that does not fit instead of printing it off the bed, and a tower parked near an
edge is routed along the clamped side rather than falling back to a straight
line across the tower.
Also fixes the placement validation rotating the tower hull by degrees read as
radians about the plate origin, and never rotating the generated tower footprint
at all.
Six issues found by reviewing the previous commit against belt-printer, two of
them release-blocking.
Data race (high). Print::process() runs generate_support_material() for all
objects in a tbb::parallel_for, and make_belt_brim() runs at its tail, but
belt_brim_obstacles() read every OTHER object's support_layers() - which a
concurrent task may be inside clear_support_layers() deleting. That is a
use-after-free, and even when it survives, the obstacle set depends on which
object finishes first. Only this object's own supports are consulted now; they
are complete at that point. Foreign objects still contribute their slices,
which are finished and immutable before the support phase.
Apron bands dropped (high), two separate causes. An apron band prints below
its own object's first layer, but another object can already be printing at
that print_z, in which case process_layer() takes the ordinary path and never
emitted the band - the emission is now shared by both paths. Separately, a
band whose print_z matched a support layer of the SAME object was overwritten
in the print-wide merge, which keeps one record per object per z and could not
detect the collision because LayerToPrint::layer() is null for a band. The
per-object pairing loop is now a three-way merge over object, support and apron
streams, so each object contributes at most one record per z.
Multi-instance was far too strict (medium). It refused belt brim for every
multi-instance object, killing plain brim width and inner brim too, and only
warned when a leading length was set. Only movement ALONG the belt changes an
instance's belt-floor Z, so copies side by side ACROSS the belt share one set of
bands perfectly well; belt_brim_instances_compatible() now tests just that, and
the warning fires whenever the brim is actually suppressed.
Apron layer bookkeeping (medium). Apron layers count toward m_layer_count and
advance m_layer_index, but emitted no Z/height tags, left m_last_layer_z,
m_max_layer_z and m_last_height stale - so the first object layer computed its
height against a pre-apron Z - and skipped before_layer_change_gcode and
layer_change_gcode entirely. All of that now matches the ordinary path.
Obstacle cost (low). belt_brim_obstacles() ran a full-plate union per band.
A bounding-box pre-filter drops non-overlapping objects before materialising any
polygon, and the union is skipped for trivial inputs.
Deliberately unchanged: every apron band still reports cooling layer_id 0.
CoolingBuffer uses it for the initial_layer_fan_speed override and the
close_fan_the_first_x_layers gate, and every band lies on the belt plane itself,
so it is all first-layer material by the only definition that means anything on
a belt. Numbering the bands would ramp the fan up while still printing on the
belt. Now documented at the assignment rather than left implicit.
A belt printer slices in a rotated frame, so the belt surface is a tilted
plane rather than the Z=0 bed plane. Each slicing layer touches the belt
only along a narrow strip at its leading edge - about 0.2mm at 45 degrees -
so a part's first layer is really a first line, with almost no contact patch
to hold it down while the belt drags it forward. Brim was hard-disabled on
belt printers, leaving no remedy at all.
Generate the brim on the belt plane instead. The object's belt footprint is
the union over layers of each slice clipped to that layer's contact band; the
brim is offset from it in a "flattened" frame where the shear axis is
stretched by 1/cos(tilt), so ordinary Clipper offsets measure true on-belt
distance. It is emitted as cross-belt lines, one per layer band, anchored to
a fixed fraction of the band so every line shares a nozzle-to-belt clearance
and therefore comes out the same width; flow is matched to the resulting band
pitch, keeping the sheet uniform and gap-free.
Three new controls, all belt-only:
* Leading brim length - extends the brim ahead of the part along the belt,
on every downhill-facing edge of its contact area. This apron necessarily
prints BELOW the object's first layer, since layer 0 is the part's leading
contact, so it needs brim-only bands of its own.
* Extra brim width - widens the brim sideways across the belt only.
* Brim type "Leading edge only" - brim at the part's first belt contact and
nothing after it. Appended last in BrimType so no existing value shifts;
degrades to an outer brim off belt printers, with a warning.
The apron bands are lightweight records rather than a Layer subclass, so no
fabricated Layer::id() can leak into initial-layer temperature selection, the
spiral vase probe, cooling or gradual interpolation. They are generated in
posSupportMaterial because their print_z values must exist before ToolOrdering
is built at psWipeTower, and they are emitted from a short dedicated branch in
process_layer that runs before any layer pointer is dereferenced.
The footprint is closed before offsetting outwards: a belt contact patch is
often a broken-up strip, and the merged offset rings of two islands closer
than 2 x brim_width would otherwise fill the space between them - space that
lies under the part.
Also fixes a pre-existing bug where PrintObject::get_first_layer_bbox()
overwrote a valid bbox with an unassigned one on any belt printer with a brim
configured, because has_brim() was true while make_brim() returned early.
Belt brim is refused alongside the prime tower and spiral vase, and requires
one instance per PrintObject - translating an instance along the belt axis
changes its physical belt-floor Z. Untilted belt printers are unchanged: they
still get no brim, since the plate brim is emitted out of skirt_brim_groups(),
which _make_skirt() never builds for a belt printer.
Ian Chua