The parallel printing options shipped to testers as is_ixex and ixex_*,
became is_imex and imex_* when the feature stopped being called iXex, and
the two clearance keys were renamed once more to say what they measure:
nozzle to carriage edge on the collision side, not the carriage's full
width. Nothing translated any of it, so loading an existing printer profile
dropped every one of these values - the keys are unknown and cleared.
is_ixex is the one that matters most, because without it the others migrate
into a feature that stays switched off, leaving settings that look
configured and do nothing.
Per-plate mode is persisted twice and only one path went through
handle_legacy. Plate metadata in a 3MF is matched by exact attribute name
and written with set_key_value, so a project saved between the per-plate
mode landing and the rename loaded every plate back on Primary and sliced
single-carriage with no warning. The loader now accepts the old attribute
name.
ixex_primary_col and ixex_primary_row are dropped rather than mapped: the
primary is a role inside the mode's active-tools string now, not a grid
coordinate, and they were never in an option list, so no saved file carries
them.
The test drives the full era-1 key list and asserts the enum values rather
than non-nullness, since a forward-compatible substitution would otherwise
hide a failed deserialize behind a default. handle_legacy had no test before
this.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* build: clear 2 warnings - cast the NSTextField the class check already proved
mainframe_text_field is NSTextField* and was assigned a bare NSView*, which
Clang reports as -Wincompatible-pointer-types. Both assignments sit inside
if ([viewObject class] == [NSTextField self]), so the runtime type is already
guaranteed, and the line above the second one casts the same variable the same
way to call setTextColor. macOS only, since nothing else compiles this file.
* build: clear 6 warning categories from the clang-cl inventory
-Wmissing-braces (9). Aggregates whose first member is itself an aggregate.
GUID's fourth member is BYTE[8], so the trailing eight bytes take their own
braces. The others were reaching for zero-initialization with {0} and say {}
now. bbs_3mf's backup Task ends in an anonymous union, which needs braces of
its own; those braces initialize the union's first member rather than the one
named at the call site, so the RemoveBackup site says so in a comment.
-Wmacro-redefined (11). SendMultiMachinePage.hpp defines five names that
Preferences.hpp, PresetBundleDialog.hpp, ExportPresetBundleDialog.hpp and
TroubleshootDialog.hpp also define with different values, so the value in
force depended on include order. All nine of this file's DESIGN_ macros take
the SEND_ prefix it already uses for its own macros, values unchanged, so a
DESIGN_ name added elsewhere later cannot collide with it again. They read as
one page-local palette, a 900 to 400 gray ramp plus sizes, so the four with
no current readers stay: dropping them would leave gaps in a named scale. test_marchingsquares.cpp defines NOMINMAX,
which libslic3r already passes as a PUBLIC compile definition, so it takes
the #ifndef guard the other suites use.
-Wbraced-scalar-init (3). Two PushStyleVar calls resolve to the float
overload, so the braces were initializing a scalar. ConfigOptionFloatsNullable
already takes an initializer_list, so the inner braces did the same thing.
-Wmicrosoft-goto (2). Both gotos in copy_file_gui jump forward over the
initialization of size, dwRead and dwWrite, which only MSVC accepts. Those
declarations move up to join the others at the top of the function.
-Wunused-private-field (3). Every use of ColourPicker's m_clrData and
m_picker_widget is behind !defined(__linux__), so on Linux they are written
and never read; the members now carry the same guard. ParamsPanel's
m_size_move is read nowhere. Tab has its own, which is the one Tab.cpp uses.
-Wnonportable-include-path (2). BaseException.h asked for "stackwalker.h"
and the file on disk is StackWalker.h.
import_presets reduced each zip entry to a basename by stripping only
'/', so on Windows an entry named with '\' separators kept its
directory components and was extracted wherever they pointed. Strip
both separators, and reject any entry whose name still escapes the
extraction folder.
The preset name from the JSON and the bundle id from
bundle_structure.json were joined onto the preset directory unchecked
as well, which let either of them write outside it on every platform.
Both are now validated before anything is written.
The check is the is_path_within_root helper the 3MF importer already
had, moved to Utils so both importers share it. It treats '/' and '\'
as separators on every platform, so a bundle that would escape on one
OS is rejected on all of them.
Closes review comment 1.
imex_parallel_mode and imex_head_filament_map were streamed raw into XML attribute
values, while every other free-text attribute in the same writer goes through
xml_escape. Mode names are free text, so "PLA & ABS", a quote or a "<" made the
document malformed. The failure is not a bad value on reload: both load paths for
model_settings.config return false on an expat error, and m_is_bbl_3mf is set
before the second entry loop runs, so the whole project fails to open with
"Archive does not contain a valid model config".
Both attributes now use xml_escape_double_quotes_attribute_value(), which also
emits tab, CR and LF as numeric character references. That matters and plain
xml_escape would not do: XML normalises literal whitespace in attribute values on
read, so a tab in a mode name would come back as a space and silently rename the
mode. The read side needs no change -- it takes expat's already-decoded value with
no second unescape -- so this is a lossless round trip and a file written by the
new code still loads in an older build.
The round-trip test used "copy_mode", which exercised none of this; it now carries
&, <, a quote and a tab, and also pins that ' and > come back unmodified, since
both are legal raw inside a double-quoted value.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* build: remove std::move that blocks copy elision
std::move wrapped around a temporary, or around a local being returned,
stops the compiler constructing it in place. Each edit is the fix clang
suggests, which is to delete the std::move call and keep its argument.
Three of the 39 sites save a move, the two return std::move(local) in
Print.cpp and TreeSupport.cpp:2749. The rest are equivalent either way
and match how the codebase already writes this elsewhere.
Clears 39 -Wpessimizing-move warnings.
* build: drop null checks on references and this
A reference cannot be bound to null and this cannot be null, so the
compiler folds these conditions to true and drops the guard. Seven are
if (&bitmap && bitmap.IsOk()), where IsOk() already does the work; two
test this directly. The guarded code runs either way, so removing the
dead operand changes nothing.
Clears 11 -Wundefined-bool-conversion warnings.
Brings in 54 upstream commits, the bulk of them the BambuStudio-ported color
mixing / mixed filament subsystem (#15347) plus its follow-ups, along with the
Assimp-backed colored OBJ import, warning-policy build changes, and assorted
profile and localization updates.
Two conflicts, both "each side added at the same point", resolved by keeping
both:
- Print::validate() -- our IMEX multi-color block and upstream's new gradient
mixed filament warning were inserted at the same spot after the empty
extruders check. They test unrelated conditions, so both are kept, each with
its own closing brace.
- tests/libslic3r/test_3mf.cpp -- our three IMEX per-plate round-trip scenarios
and upstream's mixed-filament round-trip scenario both append to the end of
the file, and each side added one include. All four scenarios and both
includes are kept.
Everything else merged cleanly, including GCode.cpp, ToolOrdering.cpp,
PartPlate.cpp and PrintConfig.cpp. Upstream left the is_extruder_used block
untouched, so the IMEX supplement still applies, and estimate_wipe_tower_polygon
is unchanged, so the prime tower hull work is unaffected.
Not addressed here, and worth its own change: a mixed filament is a virtual slot
that no nozzle carries, while physical_extruder_map routes logical slots to
physical heads. Print::extruders() lists mixed slots under their own id whereas
tool_ordering.all_extruders() lists them post-expansion, so the IMEX pem lookups
have no defined answer for a mixed slot. Upstream's own guards reject a mixed
filament where a physical slot is required; IMEX likely wants the same.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Conflicts were all co-located additions rather than design collisions:
- GCode.cpp: adopt upstream's toolchange(filament_id, nozzle_id) signature and
per-variant set_config_index() while keeping the IMEX bare-T<n> suppression;
rebase the second-layer temperature loop's non-IMEX branch onto upstream's
get_filament_config_index() resolution.
- Preset.cpp / PresetBundle.cpp / PrintConfig.cpp: keep both sides' option-list
and enum-map entries.
- GLCanvas3D.cpp: upstream's printable_heights argument plus the IMEX ghost pass.
- PartPlate.cpp: keep <set> (still used).
- test_gcodewriter.cpp / test_3mf.cpp: keep both sides' test cases.
Resolves two conflicts:
- GLCanvas3D.hpp: keep both the IMEX ghost render declarations and
upstream's _render_wireframe_overlay().
- test_gcodewriter.cpp: both sides appended test cases to the same
region; keep upstream's origin/machine-limit tests alongside the
pressure-advance and temperature scenarios.
- Print::update_filament_maps_to_config takes filament/volume/nozzle
maps, backfills an empty volume map from extruder types, rebuilds
filament_map_2, re-expands the per-filament variant arrays, and
recomputes retract overrides keyed by resolved slots
- grouping writes its result back in every non-sequential mode;
manual multi-nozzle grouping validates the user mapping and raises a
translatable error on deviation; the engine's concrete volume
assignment is deliberately not merged yet (per-filament arrays are
already consumed by filament id, so materializing High Flow now
would change motion before the layer-aware resolvers land)
- Print::apply treats the three map keys as engine outputs in auto
modes (erased from the diff and adopted), compares them against used
filaments in manual mode, and keeps the pre-expansion snapshot in
sync with the late normalization pass so rebuilt headers reflect the
sliced state instead of resurrecting stale values
- volume/nozzle maps and extruder_nozzle_stats join the invalidation
group of filament_map (wipe tower + skirt/brim)
- PresetBundle composes full configs with an optional per-filament
volume map (plate map, else defaults derived from each extruder's
flow type); project config keeps the map sized across filament
count changes
- PartPlate stores per-plate volume/nozzle maps; Plater injects them
at every slice-composition site (incl. g-code reload and wipe-tower
estimation); BackgroundSlicingProcess reads engine results back to
the plate in auto modes
- per-filament map trust guards relaxed to size-match everywhere now
that every producer sizes the map; single-filament explicit flow
assignments are honored
- tests: grouping volume maps stay concrete, merge semantics of
update_used_filament_values, single-filament override honoring
Motion g-code is byte-identical fleet-wide including Hybrid projects
(19-fixture gate + repro determinism double-slice). Header deltas:
the map keys now dump real values, and stale pre-normalization values
(e.g. enable_prime_tower on single-used-filament prints) no longer
leak into the config block.
* fix: isolate calibration temp paths per user
The calibration temp files under <temp>/calib were file-scope statics
initialized before set_temporary_dir() runs at startup, so they kept
using the shared system temp root and missed the per-user isolation
added in #14607. On Linux every account shares /tmp, so the first user
to calibrate owns /tmp/calib and later users fail to write there, the
same cross-user collision #14607 fixed for model backups, STEP import,
and part skip.
Build the paths lazily from temporary_dir() instead, through a
calib_temp_dir() accessor and a calib_temp_file() join helper. The base
becomes <temp>/orcaslicer_<uid>/calib on Linux and is unchanged on
Windows, where the temp dir is already per user.
Also make StoreParams::path a std::string rather than a non-owning
const char*. The calibration code had to keep a std::string alive
solely to feed that pointer, and the field was uninitialized by
default; owning the string removes the lifetime hazard for all three
callers and makes the entry guard a reliable empty() check. Confined to
the 3mf project exporter (three callers, two internal reads); no
on-disk, format, or ABI impact.
Follows up on #14607 per @Noisyfox's review suggestion.
Catches the iXex/IDEX parallel-printing branch up to upstream main
(102 commits). Two content conflicts resolved:
- src/libslic3r/Preset.cpp: s_Preset_printer_options — kept upstream's
new "use_3mf" key and our iMEX printer-capability/mode keys.
- tests/fff_print/test_gcodewriter.cpp: upstream revived the disabled
suite (#14196), dropping the obsolete [.]-tagged lift() test and its
config_lift_unlift.ini; kept their set_speed + z_hop tests and appended
our 10 per-firmware set_pressure_advance/set_temperature scenarios.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
* feat: add support for 3MF file format in printer configurations and export options
* fix file extension
* enable 3mf for X Max 4
* disable use_3mf for X Plus 4
* Fixed an issue where `label_object_enabled` was not properly propagated to 3mf
* enable exclude object for Max 4
* remove hardcoded use 3mf for flashforge, move them to the new printer profiles config
Across 6 files the literal "primary" string was the sentinel for "no IMEX
parallel mode active" — used for short-circuiting in serialization, ghost
visualization, zone calc, popup-menu list construction, the IMEXModesCtrl
non-deletable first row, and several layer-of-export checks. A typo in
any one would silently bypass the guard.
Define kImexPrimaryMode in IMEXHelpers.hpp with a docstring describing
what equality with it means semantically, and route every call site
through it. No behavior change.
Touched: bbs_3mf.cpp, GCode.cpp, PartPlate.cpp, Plater.cpp, Tab.cpp.
The bbs_3mf and Tab files now include IMEXHelpers.hpp; the other three
already did.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Using bbs versioning for bbs atributes
* Orca tags
* Bump SLIC3R version to match current BBS
* New import logic
* to_string_sf
* 2.3.2 No tagged
* Update comment
Replaces the plater-icon popover with colored transparent ghost copies
of primary-head instances on the plate, one per secondary active head
under its Copy/Mirror role transform. Left-click on a ghost opens a
compact filament picker popover for the ghost's head (MMU lane override).
Ghosts track the primary through drag/rotate/scale/mirror and invalidate
on mode or pem changes.
Key pieces:
IMEXHelpers -- imex_head_transform (Primary/Copy/Mirror), shared role
parser, per-head filament resolution with X-axis Mirror anchor.
PartPlate -- ghost state, volume rebuild on mode/map/object mutation,
primary_origin plumbed for Mirror reflection across the primary-row
gantry plane.
GLCanvas3D -- ghost rendering with per-head filament color and
translucent blending; picking routed via volume composite id.
Plater -- ghost click + tooltip; plater icon left-click always cycles.
IMEXFilamentPickerPopover -- BitmapComboBox row for one secondary head,
writes imex_head_filament_map on selection.
bbs_3mf -- round-trip the per-plate imex_head_filament_map option.
PrintConfig -- add imex_head_filament_map as a plate option.
MMU/AFC routing for parallel modes relies on the printer profile's
physical_extruder_map (see prior commit for authoring format). Primary-
row heads and their per-plate filament overrides are resolved through
that map, so PA and temperature emission address the correct physical
extruder when multiple logical slots share one carriage.
Tests: IMEXHelpers coverage for Primary/Copy/Mirror transforms
including a 2x2 off-row regression guard for the X-axis reflection fix.
* identified code for snapping to buidlplate
* rename internal name to ensure_on_bed to be consistent, saves option in 2mf, finish Move UI, use in both ensure_on_bed() functions
* makes auto_drop a per-object setting, removes global setting
* remove adUndef, add auto_drop to constructor/serialize
* fixes drop() button
* add "auto_drop" checkmark to "load as single object" dialog,
nothing changes if auto_drop == yes || "load as single object",
if auto_drop == false and "load as single object" == false the objects now retain their relative position to each other
* retains auto_drop (and printable) state when assembling or splitting objects,
adds ObjectList::printable_state_changed() overload to be able to only provide ModelObject* vector
* adds dialog when splitting to ask if auto_drop should be disabled,
only shows when auto_drop enabled and atleast one volume floating
* adds arrow indicator on bounding box if auto_drop == false
* removes unneeded code, keeps "auto_drop" naming consistent
* makes for loop simpler in set_printable, set_auto_drop and get_auto_drop,
makes get_auto_drop const,
fixes wording in Snapshot text
---------
Co-authored-by: Hanno Witzleb <hannowitzleb@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
- Add per-plate iXex mode icon to the plate toolbar (normal, hover, dark, dark-hover SVG variants)
- Left-click cycles through available modes; right-click shows a popup menu with all modes as radio items
- Mode changes are recorded in the undo/redo snapshot system
- Fix double context menu: suppress EVT_GLCANVAS_PLATE_RIGHT_CLICK and EVT_GLCANVAS_RIGHT_CLICK when the iXex icon popup was already shown
- Remove ixex_parallel_mode combo from Print Settings > Other > Special mode (superseded by per-plate icon)
- Remove dead code: refresh_ixex_mode_combo(), m_ixex_mode_combo member, related Tab reload hook
- iXex mode persisted in 3MF project files via existing plate metadata serialization
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
