* Support 'Default' filament option (index 0)
Treat filament index 0 as the new "Default" (use active object/part filament) instead of using 1. Update config defaults and tooltips for wall/sparse/solid infill filament options (min/default -> 0, tooltip explains "Default"). Adjust normalization and propagation logic to respect explicit feature overrides and only apply base extruder when feature values are zero; only copy sparse->solid infill when sparse > 0. Introduce FeatureFilamentOverrideMask and clamp_feature_filament_to_valid to resolve and clamp feature filaments. Update UI lists and selection behavior to expose a "Default" entry and handle zero-based indices in PartPlate and Plater.
* enable_filament_for_features option
Co-Authored-By: LixNix <105106115+lixnix@users.noreply.github.com>
* \n
* Allow wipe_tower_filament to equal nozzle count
Relax the assertion in Print::extruders to permit wipe_tower_filament == config().nozzle_diameter.size(). The configuration value is 1-based and the code subtracts 1 when pushing the extruder index, so equality should be valid and selecting the last nozzle should not trigger an assertion.
* Revert "Allow wipe_tower_filament to equal nozzle count"
This reverts commit 2c976574327a8bcdc74a1b296bf1aaff7752a94e.
* Revert "enable_filament_for_features option"
This reverts commit 01c13baeddb8e26793f752deab788ee4d086975b.
* Migrate legacy feature filament defaults
Add migration logic to convert legacy feature filament selections from 1 to 0 for older 3mf files. Introduces a local migrate_legacy_feature_filament_defaults lambda in src/OrcaSlicer.cpp and src/slic3r/GUI/Plater.cpp that scans keys (wall_filament, sparse_infill_filament, solid_infill_filament, support_filament, support_interface_filament) on configs/objects/volumes, updates values, counts conversions and logs the result. Also adds a Semver check for "2.4.0-dev" in OrcaSlicer to trigger the migration for files older than that version. This preserves expected default filament selections when loading older project files.
* Update OrcaSlicer.cpp
* Extract migration helper to ConfigMigrations
Centralize legacy feature-filament default migration by moving the duplicated lambda into ConfigMigrations::migrate_legacy_feature_filament_defaults (src/libslic3r/Config.cpp) and declaring it in Config.hpp. Update OrcaSlicer.cpp and slic3r/GUI/Plater.cpp to call the new function instead of inline lambdas. The helper converts specific feature filament keys (wall_filament, sparse_infill_filament, solid_infill_filament, support_filament, support_interface_filament) from int 1 to 0 and returns the count of conversions to avoid duplicated migration logic.
* Remove DynamicFilamentList1Based and consolidate lists
Delete the specialized DynamicFilamentList1Based struct and its global instance. Update Choice registrations to use the single dynamic_filament_list for wall, sparse_infill and solid_infill filaments, and remove the extra update call for the removed instance. This consolidates filament choice handling and removes duplicated logic in Plater.cpp.
* move it
* fix objects
* Update Config.hpp
* Update profiles
* Fix data race in extra bridge layer generation causing spurious bridges on top surfaces
* Guard second bridge layer against top most surfaces
* CoPilot review comments & lighting infill threading fix.
* Elefant foot compensation for solid layers
Elefant foot compensation for solid layers above bottommost by infill density manipulation.
* Update Fill.cpp
* change the option to expert cat
* use is_approx for float
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Port Z Anti-Aliasing from BambuStudio-ZAA (https://github.com/adob/BambuStudio-ZAA)
to OrcaSlicer. ZAA eliminates stair-stepping on curved and sloped top surfaces
by raycasting each extrusion point against the original 3D mesh and micro-adjusting
Z height to follow the actual surface geometry.
Key changes:
- Add ContourZ.cpp raycasting algorithm (~330 lines)
- Extend geometry with 3D support (Point3, Line3, Polyline3, MultiPoint3)
- Template arc fitting for 2D/3D compatibility
- Change ExtrusionPath::polyline from Polyline to Polyline3
- Add 5 ZAA config options (zaa_enabled, zaa_min_z, etc.)
- Add posContouring pipeline step in PrintObject
- Update GCode writer for 3D coordinate output
- Add ZAA settings UI in Print Settings > Quality
- Add docs/ZAA.md with usage and implementation details
ZAA is opt-in and disabled by default. When disabled, the slicing pipeline
is unchanged.
* Brim can follow EFC outline
* Optimization
* Update Spanish EFC brim description
Adopt reviewer-proposed wording from RF47.
Co-authored-by: RF47 <RF47@users.noreply.github.com>
* Tag Orca specific changes
Tag Orca specific changes vs. Bambu using the comment //ORCA: . This helps when reviewing merge commits from upstream Bambu so we don't end up causing regressions when pulling in commits from upstream
* Tooltip update
---------
Co-authored-by: RF47 <RF47@users.noreply.github.com>
Co-authored-by: Ioannis Giannakas <59056762+igiannakas@users.noreply.github.com>
Fix: Fixing the logic of the adaptive layer height for supports
Removing `tree_support_adaptive_layer_height` because its logic duplicates `independent_support_layer_height`
1. Detect unprintable area for extruder when slicing
2. Always do filament map again if object pos changed
jira:STUDIO-9473
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic01b8be8e3b08ba6b34efb2d3c451c9e985a03e8
(cherry picked from commit f1445ff0477795e9baf3792348ff27d79ee2308c)
* refactor Infill rotation template
* clean up comments
* set default solid_infill_rotate_template to empty
* Fix an issue that infill_direction solid_infill_direction not working as expected
* Add Extra Solid Infill Feature
Introduced a new feature to insert extra solid infills at specific layers for enhanced strength in 3D prints.
* fix doc error
* fix image name
* support "#K" for Explicit Layer List
* update wiki
* Add some new non-overlapping functions for rotation surfaces/infills
I can't post the entire package of changes yet, but this is just the beginning. These features do not affect the latest changes to the pattern rotation system. They are merely adding new functionality.
* Added relative rotation of the infill according to the template.
* Update PrintConfig.cpp
* Update PrintConfig.cpp
* Update PrintConfig.cpp
* Add height limitation
* Both sparse and solid. +one-time instructions
* implementation v3
need for clean code in future
* + Multiply Instructions
* Add solid layers into sparse infill
* Update Layer.hpp
* Update PrintObject.cpp
* Update Tab.cpp
* Remove some bugs and increase quality
* rename apply_model_direction to align_infill_direction_to_model
* Change the data type of top_surface_direction and bottom_surface_direction to float so that they are consistent with other infill direction parameters.
* remove top_surface_direction and bottom surface_direction options
* clean code
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Feature: Fuzzy Skin Extrusion Mode
This extension allows you to add new features to the fuzzy skin generator.
* Add auto switch to Arachne mode
* Move dialog to `update_print_fff_config` and update how `is_msg_dlg_already_exist` is used
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* Infill Line Multiplier
* Modular Offset Function
* Lightning multiline
* Crosshatch Multiline
ipCrosshatch
* cleaning
Cleaning
clean2
* 3d Honeycomb
cut poliline ends
* Fill Tpmsd Multiline
Fill Tpmsd Multiline
* Update Multiline function
multiline funcion simplify
* Update FillTpmsD
* FillHoneycomb
* Update src/libslic3r/PrintConfig.cpp
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
* Fix Honeycomb Multiline
Simplify polylines in honeycomb infill generation
* Improve multiline infill support and pattern simplification
Moved multiline infill application after pattern translation and simplification in Fill3DHoneycomb, and added multiline support to FillAdaptive. Updated honeycomb and 3D honeycomb infill to simplify polylines to 5x line width. Extended GUI and config to support multiline for Adaptive Cubic infill pattern and clarified max value comment.
minimum changes
Co-Authored-By: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
* Increase multiline fill spacing in honeycomb infill
Adjusts the spacing parameter in the multiline_fill function to 1.1 times the original spacing, potentially improving infill distribution or print quality.
* Refine fill_multiline tooltip and pattern support logic
Updated the tooltip for the 'fill_multiline' parameter to improve clarity and punctuation. Refactored the logic in ConfigManipulation.cpp to clarify which infill patterns support multiline infill.
* better management of non supported infill patterns
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Co-authored-by: Ian Bassi <12130714+ianalexis@users.noreply.github.com>
* Create top surface density option
* Update tooltip
* Specify what 0% top infill means
* Add density for bottom layers
* Discourage users from using top/bottom density incorrectly
* Fix percent don't need translation
* Fix incorrect indentation
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
* SPE-2405: Add Zig Zag infill that is rectilinear infill but with a consistent pattern between layers.
This Zig Zag infill is inspired by the Zig Zag infill in Cura.
Change-Id: I798affa99f4b5c3bd67f47643e67530fb7c3e0cb
(cherry picked from commit 2808d04d5deef6f99f9618648e46f11de03efc98)
* Add Cross zag and locked-zag for shoes
Ported from BambuStudio
* wip
* sparse infill roratation template
* solid_infill_rotate_template
* remove rotate_solid_infill_direction
* hide sparse infill rotation template for non applicable infill pattern
* hide solid_infill_rotate_template for non supported solid infill patterns
* update icon
* support empty string for ConfigOptionFloats deserialize
* fix build errors
---------
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
* Generate support interface iron extrusion
* Always ironing last
* Add options
* Move ironing speed to speed tab
* Don't iron places that are covered by upper support layers
* Disable support interface spacing settings when support ironing is enabled
* Update text
* Clipper: Verify range of int32 coordinates on input.
Cherry-picked from prusa3d/PrusaSlicer@fa7debf49d
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* ClipperLib: Optimized PointInPolygon() to calculate cross products
with int64s instead of doubles.
Cherry-picked from prusa3d/PrusaSlicer@9dca8403fe
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* Reworked the ClipperLib / Polygon types to use
the tbb::scallable_allocator to better scale on multiple threads.
Cherry-picked from prusa3d/PrusaSlicer@9cde96993e
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* use tbb::scallable_allocator for Polygons and ExPolygon::holes
to better scale on multiple threads
Cherry-picked from prusa3d/PrusaSlicer@b67ad6434d
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* Fixed compilation on GCC and CLang
Cherry-picked from prusa3d/PrusaSlicer@b3b44681a9
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* Remove clipper2 which is not used
* Removed shiny profiler from clipperlib
Cherry-picked from prusa3d/PrusaSlicer@7e77048593
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* ClipperLib: Further optimization of memory allocation using scalable_allocator.
ClipperLib: SimplifyPolygon() - changed default winding number to positive,
added strictly_simple parameter.
ClipperUtlis simplify_polygons() - removed "remove_collinear" parameter
Cherry-picked from prusa3d/PrusaSlicer@a7e17df25f
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* ClipperLib: emplace_back() instead of push_back().
Cherry-picked from prusa3d/PrusaSlicer@2e150795b1
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* Fixed issue in a 32bit clipper, where IntersectPoint() checked for
the Y coordinate of the calculated intersection point for validity,
but the Y coordinate was already rounded to 32bits, thus an overflow
may have in rare cases masked invalidity of the result.
Cherry-picked from prusa3d/PrusaSlicer@b39c33414f
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* Fixed Vojtech's out of boundary assert in Clipper library.
Cherry-picked from prusa3d/PrusaSlicer@0a202dcff3
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
* Update clipper to 6.4.2.
Cherry-picked from prusa3d/PrusaSlicer@b8b3cccb40
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
* Try fix cmake opencv
---------
Co-authored-by: Vojtech Bubnik <bubnikv@gmail.com>
Co-authored-by: Lukáš Hejl <hejl.lukas@gmail.com>
* Merge tiny cracks that is part of a large bottom surface into bottom surface (SoftFever/OrcaSlicer#9329)
* Revert bottom offset
* Top surfaces will have perimeters around, which need to be removed from bottom surfaces so bridges not extended to visible areas
* FIX: enable circle fitting of tree support with larger threshold
jira: STUDIO-8588
Change-Id: Ia566fa14f7f786ff905fc3484885634811a6d686
(cherry picked from commit bambulab/BambuStudio@82c72b19bd)
* Additional control over bridges
* Label updates
* Detect and handle layers over external bridges
* Label updates
* To-Do placeholders
* Filter out small external bridges
* Apply safety offset for internal bridge polygon intersections
* code comments
* Increase bridge offsets to 3 perimeters total (1.5 perimeter in each dimension)
* Filter out bridges based on perimeter counts to focus bridge on areas where bridge infill is actually generated in the end.
* Fixing bugs
* Convert tick boxes to drop down menu
* Additional geometry checks for second internal bridge to ensure no small polygons are left over.
* Minor code refactor for clarity
* Further refinements in polygon logic
* Polygon logic refinements pt3
* Further union operations to ensure clean geometry
* Fix compile error
* Clean up constructors
* Only create bridges on stInternalSolid areas, not sparse infill.
* Refactor internal second bridge logic to stand alone parallel for loop to avoid thread deadlocks
* Revert change to only consider stInternalSolid areas for second internal bridge layer.
This resulted in partly unsupported solid infill areas above as the remainder was too narrow to generate sparse infill
* Updated beta statements and tooltip changes
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
1. speedup organic tree support by using parallel for intersection of bed area
jira: STUDIO-8451
2. add extra wall for hybrid tree support's tall branches
3. disable circle fitting for tree support. This feature produces inconsistent
circles for tree supports.
4. expose the option tree_support_branch_diameter_angle. Tree supports'
strength can be improved by increasing this value.
Change-Id: If3688ca895df98a77f6ca538077daf8fe94e53f1
(cherry picked from commit 7697eb3dc8f87204d28e6be9adaf55dfcdadbc74)
Change the behavior of "tree support wall count" option, let it control precisely.
0 means auto.
jira: STUDIO-8068
github: 4780
Change-Id: I6d1a64cff9b121f5c0a3e910c5ddbfe6db198687
(cherry picked from commit a557bbe758cd352fa9bb48323995ed2c90737577)
Previously painting support enforces on vertical faces doesn't work, as projecting the facets downwards will give empty polygons.
Now we use a different mechanism to enable vertical paint-on enforces, by directly adding contact nodes.
Note: this feature only works with tree support as only tree support has contact nodes.
jira: none
Change-Id: Id171b1665566d142a6427285baccb40c0aa00949
(cherry picked from commit 9c882f61eb37350a4486df58de48f0ae489f2d15)
(cherry picked from commit 68625a6e601e2feef8e56693da1f58372b27b560)
