1.Caused by too big tolerance
jira:STUDIO-10236
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0ba182991bc70ca2d3a34a85b87fa7539c5e50d9
(cherry picked from commit d2ae5ea32c55c0023b27fac73a7479c2bd9a7e1c)
1.Always pop up to switch support type for PVA filaments
2.Rename the old "on_filament_change" to "on_filament_count_change",
add a new function as "on_filament_change"
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib5a96f2334bbe016db6661864d44e66c1fc5660f
(cherry picked from commit a17aa8c701d05cee57fb9d422a5bcde9f434fd7b)
1.Add a Trietree to match command instead of the switch sentence.
2.Support VM104 and VM109
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5f6b3d1bf87baebc0a20c2589a5138538469dfec
(cherry picked from commit 85cb4a41c2a7e42552d7b8c04864e5199ae942e9)
Only update the last group id if there really has filaments
jira:STUDIO-10108
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I646f54c0bc4817f0b64364edc52b7263d2833c3c
(cherry picked from commit c6a12c38c589e15194a13632397754338cc82c93)
1. Remove error tip for unprintable areas if no longer needed
2. Add link for filament map dialog in error tip
jira:STUDIO-10073
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic3235038de73a85964c6dbcb9b4f435e7aa47d34
(cherry picked from commit 1793060e96cec973d9606bd4fbe36686671e0fee)
1.Add filament type into consideration when selecting best map for
ams in filament saving mode
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I7d4a4ff66da479ab560eaeea614e5bbf0f930d3f
(cherry picked from commit 4b6f82d042cadbd65e66edbb1c8287791da5caa3)
1. Only check printablily if have explicit filament map
2. Refine some sentences
jira:STUDIO-9753,STUDIO-9727
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2fc3aa2276dc6f514c50ac2fcaf9509f41e778f3
(cherry picked from commit 73f92d27dab667c8893ab96e47f3832ce9d2de60)
1. Add tag to mark the global map mode
2. Fix some wrong usage of bmp in code
3. Fix display error in dark mode
jira:STUDIO-9729
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Idb36a5022c403e02c26d7fe23a95dd6877deca90
(cherry picked from commit 5a2abf7e211327cde57717b5ab7b79b63c967bbd)
1.Add sync command. Now gcode and dirrectly add time sync command
2.Add support for ceil and floor in placeholder
3.Update change filament gcode for H2D
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6dd97cbd96bae1c2751c08357ff64947876d7471
(cherry picked from commit c99fcd454c2499b0c0e3ed9402a2182c00a9bffa)
1. Enable hover and pop up even if slice btn is disabled. Always
trigger background process schedule
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie9c63c952eeb0f8a7611dd9929e656360609d11a
(cherry picked from commit 9340b4f89e3bd33f4f6d826118e90babe0ca694c)
1. Always change the map and mode in plate if plate mode is not default
2. Always add pop up before slice
3. Fix the mapping issue in gcode viewer
jira: studio-9523,studio-9519,studio-9513,studio-9479
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0d7d5daf081951ea2d49e06565762ac24064e77c
(cherry picked from commit afaa48520e16b6808f05e511ac1cfe91acadc84b)
Set fan speed to 40
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I861f78e2cca4b31daf41e2cba0a4b9b11a658a5d
(cherry picked from commit 4a087ef78070af66d7551aacdca74c9a2d4463f2)
1. Detect unprintable area for extruder when slicing
2. Always do filament map again if object pos changed
jira:STUDIO-9473
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic01b8be8e3b08ba6b34efb2d3c451c9e985a03e8
(cherry picked from commit f1445ff0477795e9baf3792348ff27d79ee2308c)
1. Add protection for building machine filaments.Sometimes we don't
know the info about maahcine filament
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3198d3a1a8825aa50aa49734f60a32620fc4f890
(cherry picked from commit 0c60cefe5e188ba966f4c254f833ae81bc5da476)
1. Optimize performance with pop up
2. Optimize display in dark mode
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic0f72a42e791fb58b84e7a88d7a34ced3a9e8c38
(cherry picked from commit 481ebc4a4b9353d8c9ef9d6bf64cb0006364e839)
1.fix crash when deleting filaments after sync ams or inital start up
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I00c96fcebf7e0fbc127414eae44f184e3caf4dd9
(cherry picked from commit 6fb0ef6e68ed673d04c1c2311835e9988b1c70d3)
(cherry picked from commit 78b00bd0e3243bc4a4d1b72547b02ee85bf7a19a)
1.When there are identical materials, try to make the quantity of
materials for each nozzle as similar as possible after grouping.
2.Fix an encoding error
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iad77d7a995b9c25d004026f409c7e2ecbb8269db
(cherry picked from commit 13d7cd06252678b6b084d17438e99ff808a4191d)
(cherry picked from commit 3cd587d09e066d6c6a27d466b7f663dfd5d674f3)
1.Should use idx in used filaments in filament group algorithm
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5acc849827d84db090e61a45e80a3df2866b2724
(cherry picked from commit 84c55c10edfda91df16843f317ebc7912205b202)
(cherry picked from commit daaca0368626e68ba5bdb0ce6a90111292454119)
1. Initilize the sentences in construct function
2. Fix some ui bugs
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I991df343932bb60d5ba86f41f641661f2159da47
(cherry picked from commit 05383187e02cc0dec6a541859d44237a63d01820)
1.Compare stats of AutoForFlush with other filament map modes
2.Refine the function signature of filament group
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iec2aff069d8c44343df8b82f045c61354c7d1c2a
(cherry picked from commit 95e49986f32070756182a31843f4f37f863f07ac)
1. Clear filament map info in plate when switch to single extruder
profile
2. Use real filament map when check tpu validality
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I45a3e8c91dd52e7300a563eda3ffb167c19b7074
(cherry picked from commit d27304e5ef2f43424046b1a1fabc8d999508be4e)
1. Check machine sync logic before pop up filament map
2. Switch to auto for flush mode if is not synced
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I05ef0e610418767f763c5579f5fc85a4e9b79c47
(cherry picked from commit 5d7f8b126789ca4f8f20d5cfbcc70ac24efd4d6c)
1. Add filament group pop up when slice
2. Add more filament modes in filament dialog
3. Add capsule button
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8bc3a2e08696e406b89e550a0335a1a36728ee65
(cherry picked from commit f1702a5c3604f685a3b35ea0e83d29bdbbd90f70)
1.Add more filament map modes
2.Filament map and mode are set as project config
3.Plate filament map is only valid when plate filament mode is
manual
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I33b2f853e0b77b9d605be1f2f1172b44df43da15
(cherry picked from commit e45f8c6dc2146e1e31a1c21e8aaada540af112d0)
1.Should get value by filament id instead of extruder id
2.Fix many other issues caused by incorrect usage
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3278d7de0f8976a97c9e5ccef80bba4a58553f5a
(cherry picked from commit 30c51dd1171fc16ba778308745fab2eb246aedd0)
(cherry picked from commit e9027478f8948352d99d33519994b044ca18a65a)
1.Always set filament retract params to filament_num size.In
gcode export module, we can always use filament idx to get
retract params
2. add logic in update_filament_maps_to_config to update the
retraction related params which can be overiden by filament
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia45dd1401aa3565d062d5da1c9f4a2ba8966f693
(cherry picked from commit 4b083d8d8220b8f65a1b804688cb2d6e238eb4e6)
1. Set shared retract length size to 2. Filaments in one extruder
shares the param
2. Move toolchange function before unretract function in append_tcr
to get the correct logic
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I215a542ce36107071fad39f1f9e30234fb19a3a0
(cherry picked from commit c4ef6e9e0950c58a8c5f612662145c6a256884ad)
The length of default value for extruder printable height
should be same with extruder printable area
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I01bf5e2a9ddb2faadbbe0a01f4ff2c5582b8ac45
(cherry picked from commit 01bb0c6d661f1d72448782523fb612b2aabfec00)
1.Only do reorder if requseted.In by object mode,we only need
to collect the filaments in the object for filament grouping
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id88f2449c6d3c5d45b9ff87513308d997fa72da1
(cherry picked from commit 7b5818fe6c538123373243ec8dfedc3c2fa68e6d)
1.Always do filament group to get correct filament map
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie4e61c310f6c0cfeacb2a49c4f065f9674b6a35f
(cherry picked from commit 242554557b1ecd72355841826af707580fc583b6)
1. Use cie de2000 as color distance
2.Consider colors with de < 5 as the same color when calculating
flush
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I4b451910a21c9db3471c63c270f1f120e3c5d160
(cherry picked from commit 72bc6f44cfab9145aecdb843ac4a03a9338a8cc6)
1. Do not consider empty filament when selecting group for ams
2. Function "collect_filaments_in_groups" is frequently called,
optimize memory allocation to speed up.
jira: NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iad8c9a257bc2dd832c77e650f8c052fb9d8379a0
(cherry picked from commit 21379e13366fd70f0042e85dcf8ee220185c782d)
1. Machine with multi extruder should set length of extruder offset
to extruder num
2. Register retract_restart_extra
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic3eb324cb91dc70b091c8922936d2709c361cc38
(cherry picked from commit 13df1ee7bab2bf13c9f5ffca6ad1228ff48e885e)
1.Caused by uninitialized filament map in mapping for AMS
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I71ce6001fc6f2e72eb9303fcaba0bac16ad70dc9
(cherry picked from commit 48023e4c154c118c9396b6065b7e2476970fd441)
1.Only consider groups with a distance within the threshold
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I91526a796a0f7f1ed3e77c41076c1f85620dd944
(cherry picked from commit 1379b838466f9b0a188fc916c31916626b933dc4)
1.Use max flow network to handle limit
2.Support setting master extruder id
3.Fix the issue in the KMedoids algorithm where data is overwritten
after each retry.
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Idd2bedf39f61e7a65eb4199852f60b8fbebe0a7d
(cherry picked from commit 3cfb49a1b9dc2c76066ec441f1028f99a4bf99c4)
1.Set the default size of ams filament to 2
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie985ecfa44cb9fcaf21406303e32bb56e731f351
(cherry picked from commit b4d85663325eb9be1be48e1eee3d3128e31650db)
1.If the group result differs little in flush,we will choose the one
that best fits the ams filaments
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Icd147b406e3494c841ef13564ad1b1231ad798fd
(cherry picked from commit 0b95bdd9d950918ea6979da6b4d62b2d2cd25b99)
1. Caused by setting the current filament to filaments used
in machine start gcode
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If6789b1e02aadc6d03610b7b7cc4c829ae767a7d
(cherry picked from commit 8c88fabe8f0476280ff18bafc320a1d1e4a01a99)
1.Use float to store the weight copmputed in the procedure.Avoid the
issue where filament weight remains at 0 after changing filaments
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Iff0cfc6e22f34affbc232dbfe196f27ee06d2d9e
(cherry picked from commit 994e4f4840a6734ab479e10d39462cc692bc4d77)
1. Nozzle Volume and Nozzle Type support multi extruder now
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie171b5105bd3830db3a992cadd365b785008c47a
(cherry picked from commit 2ebd14667e43dc745556f5e7bcbb7c2ccad4a007)
1.Use min cost max flow to solve the tool order
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I909845039b67c7fe3ddd42580ad3f1d71d52262d
(cherry picked from commit 0716b8518ef62e0eac7c45de8bafb1458d8f9a8e)
xun.zhang