- Print::update_filament_maps_to_config takes filament/volume/nozzle
maps, backfills an empty volume map from extruder types, rebuilds
filament_map_2, re-expands the per-filament variant arrays, and
recomputes retract overrides keyed by resolved slots
- grouping writes its result back in every non-sequential mode;
manual multi-nozzle grouping validates the user mapping and raises a
translatable error on deviation; the engine's concrete volume
assignment is deliberately not merged yet (per-filament arrays are
already consumed by filament id, so materializing High Flow now
would change motion before the layer-aware resolvers land)
- Print::apply treats the three map keys as engine outputs in auto
modes (erased from the diff and adopted), compares them against used
filaments in manual mode, and keeps the pre-expansion snapshot in
sync with the late normalization pass so rebuilt headers reflect the
sliced state instead of resurrecting stale values
- volume/nozzle maps and extruder_nozzle_stats join the invalidation
group of filament_map (wipe tower + skirt/brim)
- PresetBundle composes full configs with an optional per-filament
volume map (plate map, else defaults derived from each extruder's
flow type); project config keeps the map sized across filament
count changes
- PartPlate stores per-plate volume/nozzle maps; Plater injects them
at every slice-composition site (incl. g-code reload and wipe-tower
estimation); BackgroundSlicingProcess reads engine results back to
the plate in auto modes
- per-filament map trust guards relaxed to size-match everywhere now
that every producer sizes the map; single-filament explicit flow
assignments are honored
- tests: grouping volume maps stay concrete, merge semantics of
update_used_filament_values, single-filament override honoring
Motion g-code is byte-identical fleet-wide including Hybrid projects
(19-fixture gate + repro determinism double-slice). Header deltas:
the map keys now dump real values, and stale pre-normalization values
(e.g. enable_prime_tower on single-used-filament prints) no longer
leak into the config block.
Review the slicing-pipeline plugin comments for context a reader of the source
alone cannot follow, and rewrite them to stand on their own:
- drop pointers to uncommitted design/plan material ("§3.6 (Twistify design)",
"the brief's note", "Fix 4(a)/4(b)")
- fix dangling references to code this branch removed: the retired set_slices()
and view mutators, the former G-code post-processing capability/trampoline,
the "Post-processing" capability family, the pre-refactor array helper
- drop "v1"/"in v1" phase labels, keeping the behavior they described
- correct stale cross-references: Twistify.py -> the real sample path;
test_plugin_host_api.cpp:32-40 -> import_orca_module in python_test_support.hpp;
"the binding"/"graphs above" -> the named source
Comment/string-only; no code behavior change.
- Print::get_nozzle_config_index / get_filament_config_indx resolve a
filament's variant slot per layer from the nozzle group result, with
hashed index caches; when no group result is published (sequential
prints), they fall back to the static filament->extruder mapping so
behavior is unchanged
- filament_map_2 caches each filament's resolved print-variant slot;
rebuilt in Print::apply after the filament_map diff handling and in
the filament-map write-back
- filament retract overrides now key by slot indices: apply_override
fallback indexing flips to 0-based, Print::apply passes
filament_map/extruder indices, the write-back passes filament_map_2
(identical resolution while slots equal extruders)
- filament_volume_map/filament_nozzle_map/filament_map_2/
filament_self_index become PrintConfig static members (required for
member access); grouping input guards tightened so their registered
1-element defaults are never mistaken for real per-filament maps
(single-filament manual mode keeps the mix-marker fallback)
- update_filament_self_index_cache refreshed at every full-config
assignment
- tests: 0-based apply_override fallback, get_config_index_base
hit/miss/mixed-type cases
The resolvers are not consumed by the g-code writer yet. Non-Hybrid
g-code is unchanged except the config header, which now serializes the
three new static keys (defaults until the per-filament producer lands);
verified by the 19-fixture byte gate: 3 added header lines per fixture,
zero motion changes.
- get_extruder_nozzle_volume_count derives per-extruder volume-type slot
lists from extruder_nozzle_stats (absent stats = one slot per extruder)
- update_values_to_printer_extruders learns the slot layout: when any
extruder mixes volume types, option arrays keep one slot per
(extruder x volume type), extruder-ascending then volume-ascending;
single-slot resolution takes the filament's volume type on mixed
extruders
- update_values_to_printer_extruders_for_multiple_filaments applies a
per-filament nozzle_volume_type override from filament_volume_map
(when sized to the filament count) and remaps filament_self_index
through the same pipeline as every other filament key
- get_config_index_base + is_auto_filament_map_mode helpers (consumers
land with the per-filament config-index resolvers)
- callers updated: PresetBundle composition paths, PrintApply (counts
hoisted above the extruder_applied guard), Print write-back
- new tests: slot counting, Hybrid slot expansion incl. stride 2,
per-filament override, non-Hybrid degeneracy
Non-Hybrid printers keep their variant layout and values (proven by a
19-fixture byte gate; the only header delta is filament_self_index now
flowing through the same variant pipeline as its sibling filament
keys). Hybrid slices grow the config-block variant arrays to one entry
per sub-nozzle volume type; motion g-code is unchanged until the
g-code writer consumes the new slots.
Gate the entire parametric Design/CAD subsystem behind a single CMake
option so the fork can be built with or without it. With SLIC3R_CAD OFF
the build is behaviour-neutral against upstream OrcaSlicer; this is the
"parallel build" for upstream integration discussion.
Gated surface:
- option(SLIC3R_CAD) + add_definitions(-DSLIC3R_CAD)
- deps/OCCT/OCCT.cmake: BUILD_MODULE_ModelingAlgorithms=${SLIC3R_CAD}
(OFF matches upstream OCCT exactly; ON adds only TKFillet + TKOffset)
- TKFillet/TKOffset link, add_subdirectory(slvs) + libslvs
- CAD kernel + GUI sources, GLGizmoPrimitive (needs GeometryEngine),
CAD Catch2 tests
- 11 upstream C++ hook sites (GLCanvas3D, MainFrame, GLGizmosManager)
- TabPosition and gizmo EType enums switched to implicit numbering so
OFF reproduces upstream indices exactly
Verified on behemoth both ways: OFF and ON link snapmaker-orca +
libslic3r_tests (exit 0); ON shows the Design tab and passes 8 [design]
+ 1 [Deviation] tests, OFF omits them and shows upstream's tab layout.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
G-code post-processing is now a step of the slicing-pipeline plugin rather than a
separate capability type. One capability class can transform slices at the geometry
seams AND edit the final G-code, behind a single picker/option.
- Add SlicingPipelineStepPlugin::psGCodePostProcess (bound as
orca.slicing.Step.psGCodePostProcess). Unlike the geometry steps it fires from the
GUI export path in PostProcessor.cpp, not from Print::process(): ctx.print/ctx.object
are None and the plugin edits the file at ctx.gcode_path in place. It may run more
than once per slice (file export and/or upload) and its output is not shown in the
preview.
- Extend SlicingPipelineContext with gcode_path/host/output_name and a C++-only
full_config; config_value() falls back to it when there is no live Print.
- PostProcessor.cpp dispatches SlicingPipelinePluginCapability at psGCodePostProcess,
driven by the existing slicing_pipeline_plugin option.
- The exported G-code lives outside data_dir(), so the plugin audit sandbox would
block the write; the trampoline's audit setup grants ctx.gcode_path's folder as a
scoped allowed root, gated on a non-empty gcode_path so the geometry-step hooks gain
no extra filesystem access.
BREAKING CHANGE: the separate G-code post-processing capability type is removed.
- orca.gcode.GCodePluginCapabilityBase and orca.PluginType.PostProcessing are gone;
post-processing plugins migrate to orca.slicing.SlicingPipelineCapabilityBase +
Step.psGCodePostProcess (and gain ctx.params / ctx.config_value()).
- The post_process_plugin config option is removed; use slicing_pipeline_plugin.
Presets carrying the old key degrade to the standard unknown-key warning.
- Manifest type = "post-processing" now maps to Unknown (advisory only; the loader
dispatches on the C++ get_type()).
Also repairs two latent build breaks the branch carried: stale Step enum value usages
in test_slicing_pipeline_hook.cpp and a reference to the removed
ConfigOptionDef::PluginType::None in Tab::on_value_change (now is_plugin_backed()).
Adds the orca_gcode_stamp sample plugin and a psGCodePostProcess binding test.
Filament grouping already consumed per-filament forbidden nozzle volume
types, but every call site passed an empty map, so a variant-restricted
filament (e.g. one limited to "Direct Drive TPU High Flow") could be
auto-grouped onto an incompatible nozzle flow type on multi-variant
printers.
- add convert_to_nvt_type() to parse extruder variant strings
- add Print::get_filament_unprintable_flow(): forbidden volume types =
printer extruder variants minus the filament's declared variants;
filaments declaring no variants stay unrestricted
- feed the map into grouping at the by-object path (Print.cpp) and all
six mapping/planning sites in reorder_extruders_for_minimum_flush_volume
- unit-test the string parser
Non-restricted configurations produce an empty map, so existing
printers' grouping and g-code are unchanged.
The FilamentGroup property/golden harness checked a per-extruder
max_group_size cap unconditionally in check_constraints. That cap is an
invariant of the flush-partition solvers only (calc_group_by_enum /
calc_group_by_kmedoids, reached via calc_filament_group_for_flush), which
partition filaments subject to each extruder's capacity.
MatchMode (calc_filament_group_for_match) does not partition by capacity:
it maps every filament to the extruder holding the nearest-color loaded
AMS filament, and its solver capacity is the used-filament count, not
max_group_size (FilamentGroup.cpp:1067). So a legitimate MatchMode result
can place more than max_group_size filaments on one extruder.
The prop_a/b/c_mode_match specs run MatchMode, and their scenarios are
generated with std::uniform_int_distribution / std::shuffle, which are
implementation-defined. For a fixed mt19937 seed, libc++ (macOS), libstdc++
(Linux) and MSVC (Windows) draw different scenarios, so the CI failure only
surfaced on Linux/Windows while macOS passed. Verified locally: 248/600
config-A MatchMode seeds exceed the cap under libc++ — it is reachable
everywhere; seed 90400 just isn't an exceeding draw on macOS.
Gate section 3 on FGMode != MatchMode. No test case is removed or skipped:
all 57 FlushMode specs still assert the cap, MatchMode still asserts the
unprintable-filament/volume correctness constraints (which it honors), and
MatchMode grouping regressions are still caught by the golden score gate at
3% tolerance. Test-only change; slicing behavior and g-code are unaffected.
NfpPlacer stores std::reference_wrapper to the items it packs and re-reads
them from finalAlign() in its destructor (via clearItems()). Two placer
tests declared the placer before the items in the same scope, so the items
were destroyed first and the destructor dereferenced dangling references.
On macOS this is a deterministic SIGSEGV: libmalloc poisons the freed block
on free, so the item's point vector reads back as ~null (deref at 0x8). On
Linux/glibc the freed bytes usually survive, which is why it slipped through
upstream CI (introduced by #14267).
Declare the items before the placer so they outlive it, matching the pattern
the sibling 'packs many items' and 'obstacle' tests already use. Test-only;
the library lifetime contract (items must outlive the placer) is unchanged
and honored in production via _Nester in Arrange.cpp.
* fix: out-of-bounds read computing tool-ordering max layer height
calc_max_layer_height() loops over the extruder count (nozzle_diameter)
but indexes max_layer_height with the same counter, reading past the end
when that array is shorter. Silent on release builds, aborts under a
bounds-checked STL (_GLIBCXX_ASSERTIONS).
Read via get_at(), which falls back to the first entry when the index is
out of range, as Slicing.cpp already does for this option.
Add a fff_print regression test slicing a two-extruder printer with a
single-entry max_layer_height.
* docs: clarify how max_layer_height ends up short in the regression test
Normalization sizes it to the filament count under single_extruder_multi_material,
not "a mismatch a profile can ship" as the earlier comment guessed.
round() already had unit coverage; floor() and ceil() had none. Add the missing
positive cases for both signs, plus round()'s half-away-from-zero tie-break, and
one negative case asserting that a name outside the grammar's built-in function
set is treated as an undefined variable and throws, rather than being passed
through to a math library.
GCode::extrude_support declared its per-path speed helper as a function-local
static lambda that captures `this` by reference. The closure is built once, on
the first extrude_support call, and reused for the rest of the process, so a
second G-code export in the same process runs the helper against a `this` from
the first export's stack frame, which has already returned.
The stale `this` flows through NOZZLE_CONFIG(...) -> cur_extruder_index() ->
GCodeWriter::filament(), reading a garbage current-extruder id and indexing
with it. It is silent whenever the reused stack still holds a usable pointer,
and an order-dependent SIGSEGV otherwise; AddressSanitizer reports it as a
stack-use-after-return in GCodeWriter::filament(). It is the only static
capturing lambda in libslic3r.
Drop static so the closure is rebuilt each call against the live frame. Add an
fff_print regression test that slices a support object twice in one process; it
fails without the fix (stack-use-after-return under ASan) and passes with it.
* fix: prevent out-of-bounds crash in Arachne beading interpolation
SkeletalTrapezoidation::interpolate() derives an inset index from `left` but
uses it to index the merged beading, which follows the thicker of left/right.
When the thicker side has fewer insets, the index runs past the end and the
slicer crashes during "Generating walls".
Skip the adjustment when the index is out of range, as the adjacent guards
already do. interpolate() uses no instance state, so make it static and add a
regression test that exercises it directly.
Fixes#14584
Replaces the plugin-only set_slices/set_fill_surfaces/set_lslices mutators with a
faithful, mutable binding of the core geometry types, so a plugin edits the slicing
graph through the same object model the C++ code uses.
- Point, Polygon, ExPolygon, Surface and SurfaceCollection gain constructors,
writable accessors (contour/holes, set/append/clear, filter_by_type), transforms
(rotate/scale/translate), boolean ops and offset. Polygon exposes a zero-copy
writable numpy view via a make_writable_rows helper.
- LayerRegion.slices/fill_surfaces stay read-only refs but are now live,
in-place-editable SurfaceCollections; Layer.make_slices() re-derives the islands
and refreshes lslice bounding boxes.
- Rewrites the Inset and Twistify samples on the new API (in-place ExPolygon
transforms, ExPolygon.offset, SurfaceCollection.set), dropping their numpy
dependency; each touched layer calls make_slices() so downstream steps see the
edited footprint. Adds tests covering in-place edits through a live collection.
BREAKING CHANGE: set_slices/set_fill_surfaces/set_lslices and the internal
parse_expolygon(_list)/surfaces_from_py helpers are removed. Plugins mutate through
the class API (SurfaceCollection.set/append/clear, Polygon.set_points/append,
ExPolygon.set_holes) instead.
feat: add regex_replace() string transform to filename templates
The filename template language could test strings (=~, !~, one_of) but
never rewrite one, so there was no supported way to reshape a placeholder
value, such as dropping a file extension from {first_object_name}.
Add regex_replace(subject, /pattern/, replacement), reusing the existing
regex-literal syntax and boost::regex engine. Every placeholder keeps
returning its exact value and the template does the transform explicitly:
{regex_replace(first_object_name, /\.[^.]*$/, "")} strip any extension
The replacement may reference capture groups ($1, $2, ...). It is one
grammar function mirroring digits(), with the name registered as a keyword
so it is not parsed as a variable.
Brings in the Plugins dialog as-you-type search with fuzzy match highlighting
and clickable column-header sorting (name, version, source, status) — PRs
#14610 and #14611.
Adds PluginHostSlicing, which registers the print-graph data model (Print,
PrintObject, Layer, LayerRegion, Surface, ExPolygon, extrusions, ...) into the
orca.host submodule in the same raw-class style as PluginHostApi's Model/Preset
graph, with shared helpers in PluginBindingUtils. SlicingPipelinePluginCapability
is trimmed to the capability surface (the standalone SlicingNumpy helper is folded
away). Adds the Twistify example plugin next to Inset and broadens the binding,
hook, and plugin-install tests.
* fix: initialize Print::m_isBBLPrinter
Built outside the GUI/CLI (headless tests, embedded use) the member was read
uninitialized: is_BBL_printer()/wipe_tower_type() feed it into ToolOrdering,
which then non-deterministically dropped per-feature filament assignments.
Default it to false, the value the GUI and CLI already assign for non-Bambu
printers.
* docs(test): add the fff_print testing contract
tests/fff_print/README.md codifies how the suite is organized: one file per
subsystem (each owning both in-memory and emitted-G-code assertions), flat
behavioral test names with a single [Subsystem] tag, a robust-tests guide,
the shared helpers, and an add-a-test checklist. Linked from tests/CLAUDE.md.
* test(fff_print): reorganize the suite to the contract and add coverage
Bring every subsystem into one file per the README: rename the test_data
harness to test_helpers; consolidate skirt/brim; split multi-filament and
cooling into their own files; disperse the test_printgcode grab-bag and the
end-to-end smoke scenario into focused tests; fold test_gcode into
test_gcodewriter. Standardize names and tags, align cube tests on the cube()
helper, and de-qualify the flagship files.
New coverage: multi-filament per-feature and per-object routing; a skirt/brim
behavior matrix (the #14333 rework, including brim ears, with regression
coverage for #14319 and #14366); resolved extrusion-width and config
comments; custom-G-code placeholders; fan control and speed-marker
consumption.
Re-enable three slice tests previously tagged [NotWorking]: the clipper
"Coordinate outside allowed range" error that disabled them was specific to a
past CI runner environment and no longer reproduces.
* test(fff_print): tag arm64-flaky skirt/brim tests NotWorking
Four skirt/brim slice tests intermittently throw ClipperLib's "Coordinate
outside allowed range" on the macOS and Windows arm64 CI toolchains (an FP
divergence, not a slicing bug; see PR #14207). Linux x86_64 and aarch64 are
unaffected. Tag them [NotWorking] so ctest -LE NotWorking skips them.
* test(fff_print): re-enable the arm64 skirt/brim tests
These were tagged [NotWorking] as a stopgap when myfork's daily-driver build
combined them with the cross-platform CI on a base that predated upstream's
m_origin fix (99dea01cc3). With upstream merged in, Print::m_origin is
initialized and the "Coordinate outside allowed range" throw is gone, so the
tests pass on macOS/Windows arm64. Drop the tags.
Replace the toolbar sort dropdown with sortable Name/Source/Status column
headers that cycle ascending, descending, then clear. Add a Source column
and a PluginSortKey::None baseline for the cleared state. The whole header
cell is the click target and the sort triangle snaps in without a fade.
On Linux every account shares /tmp, but slicing builds temp paths there under
fixed, app-owned names via temporary_dir() (model backups, STEP import,
part-skip). The first user to slice creates and owns those dirs, so the next
user cannot write under them and slicing crashes with "No such file or
directory".
Tag the app temp root with the user id at startup (<temp>/orcaslicer_<uid>)
so every temporary_dir() consumer is isolated at once. The id stays at the
top level of the world-writable system temp so each user's dir is created
directly there; a shared parent dir would be owned by whichever user made it
first. The root is pre-created because STEP import writes into it directly.
Windows keeps the plain temp dir since it is already per-user.
Fixes#10108. Same root cause as #5969.
Introduces a plugin capability that runs Python at the seams of Print::process(),
letting a plugin read and rewrite slicing state as it is computed.
- New slicing_pipeline_plugin config option; selected plugin refs are serialized
into the print manifest.
- Print gains an injectable hook fired at each pipeline step (posSlice,
posPerimeters, posInfill, ...). It is a no-op when unset, fires only on genuine
(re)computation, and never on the use-cache path.
- orca.slicing submodule: SlicingPipelineCapabilityBase plus a trampoline and a
Step enum. Capabilities read the live graph through zero-copy int64 numpy views
(contour/holes geometry with unscaled coordinates, flattened toolpath data) and
edit it through 2D-geometry mutators with cache-invariant refresh.
- GUI dispatcher runs capabilities during slicing under the GIL, turns plugin
errors into slicing errors, honors cancellation, and adds the plugin picker.
- Ships the InsetEverySlice sample plugin and binding/hook tests.
{input_filename_base} is meant to be the saved project's file name. Before
#13753 a bug made it fall back to the first object's name when a project was
saved; #13753 fixed it to use the project name. Some users relied on the old
behavior to get the part name into their output file name and had no
placeholder to recover it ({model_name} is the 3mf designer metadata, blank
for plain STL imports).
Add {first_object_name} as a dedicated placeholder for the first printable
object on the current plate, populated in update_object_placeholders()
independently of {input_filename_base}.
Closes#14493
* Support accessing `coFloatsOrPercents` values in gcode template (OrcaSlicer/OrcaSlicer#14522)
* Vector option values are separated by comma
* Fix wrong cast used for checking nullability
gcc reads "\x10cad..." as one escape (c/a/d are hex digits → 0x10CAD > 255).
Split the string literal so the \x10 escape terminates. clang let it slide;
gcc (Linux/Windows CI) errored and blocked the OrcaSlicer build.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
orca_cad's test_geometry.cpp is upstream Catch2 v3 with no CAD suite, so the
surface_deviation check lives alongside the CAD tests here. Built + ran green
in orca_cad's kernel-test docker: All tests passed (4 assertions). Both forks
now carry the test.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
PR #13712 fixed the uninitialized Print::m_origin (commit 99dea01cc3, "Fix coord
out-of-range exception caused by m_origin memory not initialized to 0") that made
headless slice() intermittently throw ClipperLib's "Coordinate outside allowed
range". With that root cause fixed, the three tests disabled for it pass again,
so drop their [NotWorking] tags.
Port of the snaporca CAD work to the mainline fork.
- Onshape default planes (XY/XZ/YZ) at the bed centre (transparent, labelled);
modeling origin unified to the bed centre (CadDocument::modeling_origin);
world-axis triad moved to the bed centre on the Design canvas only.
- Datum plane: clickable ghost-plane base pick + draggable offset arrow.
- Slot: dims reassessed to inter-centre distance / radius / angle; fixed the
duplicate cap-arc radius quote.
- Hole: 3D cube move-handle on the face; binds to the face on the first click;
decluttered side-distance construction lines.
- Thread: derive the M spec (diameter/pitch/depth) from a picked cylindrical
surface or circular edge (GeometryEngine::circle_of_edge); fuse the helical
ridge onto the existing body; MakePipeShell fixed-binormal sweep (uniform, no
twist) + self-intersection/param guards.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
Mirror of snaporca-cad a82cb0d. snaporca-88g — three [CadDocument] tests
proving recompute() replays the whole timeline, so editing any feature (not
just the last) rebuilds downstream: mid-timeline extrude edit -> fillet
rebuilds; first-feature sketch edit propagates the chain; the same survives
serialize_recipe()/deserialize_recipe(); a sketch->extrude->hole->chamfer
chain rebuilds hole+chamfer on a mid-edited extrude. All 3 pass (34 assertions,
Catch2 v3). on_edit_feature edits the tree-selected feature at any position
(13/16 types); Import/Boolean/Cut get a status message instead of a silent
no-op (full dialogs = follow-up snaporca-nu9).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
CalibPressureAdvancePattern::line_width_first_layer() returned the raw
initial_layer_line_width, so a value of 0 (which means "use the default")
fed 0 into the Flow spacing math and threw FlowErrorNegativeSpacing,
crashing the whole app when slicing a PA pattern calibration.
Mirror the guard already present in the sibling line_width(): when the
configured width is non-positive, fall back to auto_extrusion_width.
Add a libslic3r regression test covering the width resolution.
Fixes#13188
Mirror of snaporca-cad ad822bf. The earlier mirror (2c0140afb9) implemented
persistence in the PrusaSlicer 3mf.cpp, but the GUI saves/loads projects via the
BBS-native backend (store_bbs_3mf / load_bbs_3mf), so the recipe was never
written to nor read from GUI-saved projects.
- bbs_3mf.cpp: BBS_CAD_RECIPE_FILE = "Metadata/SnapOrca_cad.bin"; writer
_add_cad_recipe_file_to_archive (called after layer-height in store_bbs_3mf);
reader branch in _load_model_from_file's metadata dispatch loop (iterate +
iequals on m_filename — mz_zip_reader_locate_file does not work on these
archives).
- Plater.cpp: load_files carries the Model-level cad_recipe onto q->model().
- test_3mf.cpp: [3mf] test asserting store_bbs_3mf embeds the recipe entry
byte-for-byte (read back via miniz, Catch2 v3).
Verified on behemoth: libslic3r_tests + the new [3mf] BBS test pass; orca-slicer
GUI links clean. Round-trip verified live on snaporca-cad (identical code path).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
Dual-fork mandate: port the parametric-recipe 3MF persistence from
snaporca-cad commits ed19eac+147e1c4 so a saved project reopens with the
editable CAD feature tree, not just the baked mesh.
Shared kernel/format/GUI (identical to snaporca-cad):
- CadDocument serialize_recipe/deserialize_recipe (cereal BinaryArchive,
versioned) + CadFeature split save/load + imported_solid<->BRep string.
- Model::cad_recipe carried through 3MF zip entry Metadata/SnapOrca_cad.bin
(writer + binary-verbatim reader branch).
- DesignPanel on_commit() stamps the recipe; on_tab_shown() rehydrates a
loaded project via load_recipe() (deserialize -> feed_bodies + refresh_tree).
Mainline-only adapters (no snaporca-cad counterpart — Catch2 v3 vs v2):
- tests/libslic3r/test_caddocument.cpp: <catch2/catch_all.hpp> +
`using Catch::Approx;` (v3 scopes Approx under Catch::).
- tests/libslic3r/CMakeLists.txt: register test_caddocument.cpp (the
original CAD port had left it out of the test build).
Verified on behemoth (snaporca-deps toolchain): libslic3r_tests clean;
[CadDocument] 17/18 (only the pre-existing tangent-to-circle SIGABRT fails,
identical to snaporca-tkz); K1 serialize round-trip + version-reject pass
(13 assertions); new [3mf] "CAD recipe blob survives a 3mf save/load cycle"
passes byte-for-byte; orca-slicer GUI links clean (186/186, DesignPanel.cpp
compiled). Interactive :10 click-through pending (no Design-tab automation).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01BVzKmX6Y1aEteit1HTXG4Q
SoftFever