# Description
Previously, wipe tower behavior was determined by the printer model.
In this PR, we introduced an option that lets users choose which wipe
tower type to use.
BBL printers remain hardcoded to Type 1. Qidi profiles default to Type
1.
This may be useful for users with a filament-cutter-based system
(similar to Bambu printers) who want to use similar configurations—they
can select the "Type 1" wipe tower. That said, Wipe Tower Type 2 is
generally recommended for all printers, whether they use a typical MMU
setup, a filament cutter, or a tool changer.
# Screenshots/Recordings/Graphs
<img width="1307" height="854" alt="Screenshot 2026-03-15 at 22 27 29"
src="https://github.com/user-attachments/assets/04bc5c42-88c4-458a-a933-a22f8408b6a8"
/>
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
The check_profiles workflow used gh pr comment directly, which fails for
fork PRs due to read-only GITHUB_TOKEN. Split into artifact upload +
workflow_run pattern so comments post with proper write permissions.
## FIXES
• Corrects area height on windows while using 125% and 175% scaling. it
shows scrollbar when it incorrectly set. i have used directly size of
combobox this time instead static number
## IMPROVEMENTS
• Removes restriction for restarting orca when setting changed
# Description
Add the localization/ directory to the Flatpak source list so
run_gettext.sh can compile .po files into .mo translations.
Replace LC_ALL=C.UTF-8 with LC_NUMERIC=C in the entrypoint script to
preserve the user's language settings while still preventing
decimal-separator parsing issues.
fixes#12714
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
Add the localization/ directory to the Flatpak source list so
run_gettext.sh can compile .po files into .mo translations.
Replace LC_ALL=C.UTF-8 with LC_NUMERIC=C in the entrypoint script
to preserve the user's language settings while still preventing
decimal-separator parsing issues.
# Description
This pull request fixes the bug where Orca Slicer enters an infinite
loop when a density of zero is introduced for the top layer solid infill
# Screenshots/Recordings/Graphs
<img width="2560" height="1392" alt="image"
src="https://github.com/user-attachments/assets/5bf5c220-a398-483f-9f69-63dadbc888af"
/>
Note: For bottom solid infill, this is not a problem because the minimum
density is 10%.
Makes sure all non-bbl printers go through the same filament reordering
code so custom filament sequence is properly handled, while skipping the
filament grouping part by mapping all filaments to group 0.
This is the same method used by BBL printer to calculate the optimal
filament grouping so should be robust.
Fix#12449Fix#12766
# Description
<!--
> Please provide a summary of the changes made in this PR. Include
details such as:
> * What issue does this PR address or fix?
> * What new features or enhancements does this PR introduce?
> * Are there any breaking changes or dependencies that need to be
considered?
-->
Happy Hare now writes mmu lane data to the moonraker db similar to AFC,
so we can normalize to the one implementation. For now, i've just
re-ordered it so that the moonraker db is checked first. I want this
because I've actually updated the happy hare data to include more data
than we had access to via the "mmu" object. For happy hare we now have
access to vendor name, which we can eventually use to further fine tune
the auto-matched filament preset.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
_n/a_
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
# Description
Qidi printers run Klipper and we don't want arc fitting enabled for
these.
This is wrongly enabled in QidiStudio as well, likely where these
profiles originated.
With certain irrational beam interlocking parameters, it will take a few
minutes to complete the interlocking generation; even worse:
cancellation doesn't work once it started.
This PR fix that by adding cancellation check inside some of the most
time consuming loops so it can be stopped ASAP.
Also cherry picked a sanity check from
https://github.com/bambulab/BambuStudio/pull/9925 by @mpaperno. Thanks!
The following test project (which was modified from the upper PR by
@mpaperno) took me more than 90s to complete with 0.1mm beam width:
[Interloack-Test2.orca.3mf.txt](https://github.com/user-attachments/files/25975637/Interloack-Test2.orca.3mf.txt)
# Description
I was just building the project and checked out the CMakeLists to see if
there are some optional features I can disable to speed up compilation
and tripped on this chinese comment.
This just translates the comment to English for consistency
Previously, wipe tower behavior was determined by checking if the printer
was a QIDI vendor. This introduces a configurable enum (Type 1 / Type 2)
so any printer can select its wipe tower implementation. BBL printers
remain hardcoded to Type 1. Qidi profiles default to Type 1.
# Description
The wipe tower config position (wipe_tower_x/y) could be outside the plate boundary (e.g. default y=250 on a 200mm printer). No constraint was applied at slice time, so the tower was generated out-of-bounds.
issue reported in #12731
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the changes made in this PR.
-->
The wipe tower config position (wipe_tower_x/y) could be outside the
plate boundary (e.g. default y=250 on a 200mm printer). No constraint
was applied at slice time, so the tower was generated out-of-bounds.
Happy Hare now writes mmu lane data to the moonraker db similar to AFC, so we can normalize to the one implementation. For now, i've just re-ordered it so that the moonraker db is checked first. I want this because I've actually updated the happy hare data to include more data than we had access to via the "mmu" object. For happy hare we now have access to vendor name, which we can eventually use to further fine tune the auto-matched filament preset.
std::map::at() throws std::out_of_range when option.category or
"Basic information" is not present in the tab's category_icon_map,
crashing the app. Replace with a safe find()-based helper lambda
that falls back to an empty string (no icon) when the key is missing.
Add a guard that skips creating fill params for top surfaces when the configured density is less than or equal to zero. This avoids generating surface fills for zero/negative densities and prevents unnecessary processing or potential errors when top surface density is disabled.
In CLI mode, PartPlateList is constructed with a NULL plater pointer
(OrcaSlicer.cpp:3612). When set_shapes() calls PartPlate::set_shape(),
it unconditionally executes render data preparation code that
dereferences the null plater through calls like generate_print_polygon()
→ wxGetApp().plater(), causing a segmentation fault (exit code 139).
This adds a null check on m_plater in PartPlate::set_shape() to skip
the render-only code block that generates logo triangles, print/exclude
polygons, gridlines, icon vertices, and plate name textures.
These rendering operations are not needed in CLI mode and this change
has no impact on GUI mode where m_plater is always valid.
