* ci(flatpak): run the unit suite in a separate job, mirroring the other arches
Alternative to the in-job step: split build and test like the Linux/Windows/
macOS legs. The flatpak build now builds the test binaries in-sandbox (the
action's run-tests fires the module's build-only test-commands), prunes the
kept build tree to the test binaries + CTest metadata + data, and uploads it
with /app as a test asset (size reported to the run summary).
A new unit_tests_flatpak matrix job downloads that asset on a native runner,
restores the module-build symlink, and runs the suite via flatpak-builder
--run (which bind-mounts /run/build so TEST_DATA_DIR resolves) against the
GNOME SDK's bounds-checked STL. Results feed publish_test_results.
Costs a per-arch asset upload/download + a runtime install on the test
runner; the trade-off vs the in-job step is a genuine separate graph box.
* ci(flatpak): run tests via `flatpak build` to avoid rofiles-fuse
`flatpak-builder --run` sets up a rofiles-fuse overlay that this CI container
rejects (Failure spawning rofiles-fuse, exit_status: 256), even in a fresh job
with a machine-id and the runtime installed, and --disable-rofiles-fuse is not
accepted in --run mode. `flatpak build` enters the sandbox via bwrap directly,
so it sidesteps rofiles-fuse; bind-mounting the build tree at /run/build gives
the same path the compiled-in TEST_DATA_DIR expects.
* ci(flatpak): slim the test asset (strip binaries, drop source tree)
The first cut shipped ~1 GB: the test exes carried debug info (the SDK builds
with -g and only the app gets stripped) and the packaged module dir included
the whole copied source tree the tests never read at runtime. Strip the test
binaries and keep only build_flatpak/tests, tests/ (TEST_DATA_DIR) and scripts/.
The irreducible remainder is /app, which the exes link against.
* ci(flatpak): extract the test run into a reusable unit_tests_flatpak workflow
Move the flatpak test job out of build_all.yml into a reusable
unit_tests_flatpak.yml, called once per arch (Flatpak x86_64 / aarch64) the
same way the other arches call unit_tests.yml. build_all.yml keeps only the
build + asset packaging; the reusable workflow downloads the asset, runs the
suite via `flatpak build`, and uploads results as test-results-<artifact> for
publish_test_results. Drops the now-unused manifest checkout (flatpak build
does not need it).
* ci(flatpak): trim comments to the non-obvious
No behavior change.
* ci(flatpak): drop redundant caller comment
* ci(flatpak): drop redundant trim comment
* ci(flatpak): drop size-report scaffolding and redundant if-guards
* ci(flatpak): force the app module to rebuild so the test asset always exists
flatpak-builder caches modules by content hash and skips a hit, producing no
build tree and no test asset, so a re-run of the same commit would leave the
separate test job with nothing to download. Inject a per-run cache-buster into
the OrcaSlicer module's build-options (part of its cache key) so it always
rebuilds, mirroring how the other arches cache only deps and always rebuild the
app and tests. The deps modules stay cached.
* ci(flatpak): trim cache-buster comment, fix stale step name
* fix: guard H2C per-filament array reads against short config arrays
The H2C tool-ordering, wipe-tower, and g-code export paths index per-filament
config arrays by filament/tool id. A config with fewer entries than the filament
count (partial or legacy projects, minimal test configs) makes these reads run
past the end of the vector: silent under a normal STL, but UB that aborts under
the flatpak build's bounds-checked STL (_GLIBCXX_ASSERTIONS).
Route the reads through the existing clamping accessors (get_at,
get_filament_category, is_in_same_extruder) and add a small clamp helper for
filament_change_length. The guards are no-ops when the arrays are sized to the
filament count, so correctly specified configs are unaffected.
* ci(flatpak): build filament_group_tests too
The suite landed on main after this branch was cut and arrived via a later merge,
so it was missing from the target list and ctest failed the leg with
filament_group_tests_NOT_BUILT.
Not tests/all, which build_linux.sh uses: that is a Ninja subdirectory target and
this build configures with the default Makefile generator, where it does not exist.
* ci(flatpak): give the embedded-interpreter tests a valid Python home
python_test_support.hpp sets PyConfig.home to <testdir>/python when that
path resolves. WIN32/APPLE populate it with a copied bundled runtime; the
flatpak leg had no such branch, so home resolved to a directory with no
stdlib and all 21 embedded plugin tests failed at "failed to get the
Python codec of the filesystem encoding".
Symlink <testdir>/python to the bundled /app/libpython that already ships
in the flatpak (the test exe links libpython3.12.so from there via rpath),
so the interpreter initializes without duplicating the runtime.
* ci(flatpak): sync the ToolOrdering guard mirror with #14789
Match #14709's build_filament_group_context guard to the version on
#14789 (size filament_info to filament_nums, truncate filament_ids)
so the folded guard is a byte-identical mirror that drops cleanly when
#14789 merges, instead of leaving a stale hunk that conflicts on rebase.
* fix: guard WipeTower per-filament array reads against short config arrays
The BambuStudio WipeTower sync reintroduced raw per-filament array
indexing that reads out of bounds when a config leaves an array shorter
than the filament count: m_physical_extruder_map in format_line_M104/M109
(indexed even when empty), and m_filament_categories in get_wall_skip_points
and get_wall_filament_for_all_layer. Silent on a normal STL, a hard abort
under the bounds-checked STL the Flatpak build uses.
Bounds-check the physical extruder map before indexing (omitting the T
token, as the existing -1 path already does), and route the two raw
m_filament_categories reads through the clamping get_filament_category()
accessor the surrounding code already uses. No change for correctly-sized
configs.
* fix: default-initialize WallToolPathsParams fields
min_length_factor and is_top_or_bottom_layer had no default initializers, and the FillConcentric/FillConcentricInternal callers never set them, so WallToolPaths::removeSmallLines() thresholded on stack garbage. Which short extrusion lines it dropped then depended on memory layout, so concentric solid-infill output was nondeterministic between runs and across machines. Give every member a default, matching the adjacent FillParams. The perimeter path was already fine because it builds the struct via make_paths_params().
* fix: bounds-check the toolchange flush-volume and HRC per-filament lookups
GCode::set_extruder's toolchange flush-volume lookup and
GCodeProcessor::update_slice_warnings's HRC check index per-filament and
per-extruder arrays (flush_volumes_matrix, the filament map, the nozzle list)
by filament/extruder id. When a config leaves one of those arrays shorter than
the filament count (partial or legacy multi-extruder projects, minimal
configs), the reads run off the end: silent on a normal STL, a hard abort under
_GLIBCXX_ASSERTIONS.
Route both reads through bounds checks: the flush lookup falls back to no flush,
matching the existing unknown-old-filament branch beside it, and the HRC check
skips an unmapped filament, mirroring the required_nozzle_HRC guard on the line
above. When the arrays are sized to the filament count the values are unchanged,
so correctly-specified configs are unaffected.
* ci: retrigger checks
* ci: name the flatpak rebuild token after the cache it defeats
Since #15650 the Flatpak job also has a compiler cache, so a bare
"cache-buster" no longer says which cache is meant. Call it
flatpak_builder_cache_buster, and name the build-dir trim step after
the flatpak-builder cache save it keeps lean.
* ci: ship resources/profiles and resources/printers in the flatpak test asset
Two slic3rutils tests added in 4aa0e1d60b read
resources/printers/bambu_filament_ids.json through PROFILES_DIR/.., and
the asset dropped resources/ entirely, so both failed parsing an empty
stream on each Flatpak leg. Keep the two subtrees the tests reach;
test_gcodewriter's shipped-profile case stops skipping on this leg too.
* ci: restore the CRLF line endings of build_all.yml
The last merge from upstream/main rewrote the file with LF endings, which
turns the 60-line change into a whole-file diff on GitHub. Upstream has had
this file as CRLF since it was created, so put it back.
* ci: trigger Build all on changes to the unit-test workflows
The path filters only matched build_*.yml, so an edit to unit_tests.yml or
unit_tests_flatpak.yml could merge without ever running.
* ci: put a timeout on the flatpak unit-test step
Matches the 20 minutes of the regular unit-test workflow; without it a hung
test holds the runner for the six-hour job default.
Orca content-addresses every system filament, Bambu's included, but a printer,
its AMS and its vendor's cloud know only that vendor's own catalog ids. The
printer agent now translates between the two: outbound MQTT and FTP traffic, the
AMS mapping sent with a print job, and the ids written into a 3mf bound for the
printer all leave in the printer's own ids, while status messages, loaded
projects and SD-card prints arrive in Orca's. An id with no mapping passes
through unchanged, and an agent whose printers already speak Orca's ids
translates nothing at all.
Bambu's map is generated from BambuStudio's own shipped bundle; a missing or
unreadable file leaves every lookup an identity rather than taking the app down.
The profile check validates the map's shape, and profile CI now runs on the paths
that can change it. docs/HLSD/filament_id.md records the places the map
deliberately does not reach.
* Block plugins from reading or writing app config and cloud credentials
Add a denied-filename registry to the plugin audit sandbox, seeded with OrcaSlicer's config (.conf/.ini) and the cloud refresh-token file. The deny is checked above the loading-mode read exemption and the allowed roots, so a plugin cannot reach these files even though they sit inside data_dir(), which is itself an allowed root. Case-insensitive prefix matching also covers the .bak/.tmp companions that hold the same data, and os.rename/os.remove are hooked alongside open so the files cannot be deleted or clobbered either.
Adapt the speed dial's ActionRegistry to the collapsed
get_plugin_capability(PluginCapabilityId) overload, and restore the
script success/skipped status message the dialog lost when its
PluginScriptRunner refactor was superseded by ActionRegistry.
The merge kept this branch's PluginConfig design, which deletes
PluginDescriptor::settings, get_plugin_settings() and ctx.params, but left
references to them behind: the slic3rutils target did not build, and the
bindings test still asserted the removed ctx.params attribute.
Port the two settings tests onto PluginConfig instead of dropping them. They
guard a field bug where a cloud-metadata refresh wiped a plugin's settings and
it silently ran on its own defaults, so the equivalent properties are still
worth pinning: that a stored config survives the refresh, and that an edited
config reaches the plugin through a real dispatch.
Also defer PluginsConfigDialog's web commands off the webview script-message
callback, as PluginsDialog already does. Its remove_preset_override handler put
a modal wxMessageBox on that stack, which is the GTK crash class fixed in
b779a7bfed/f2ccbfc8b5 for the sibling dialog.
Cloud catalog records never carry [tool.orcaslicer.plugin.settings], so the
metadata merge wiped the locally-parsed settings and plugins silently ran on
their built-in defaults (ctx.params arrived empty).
Drop the orphaned PluginCallbackList (dead
after the PluginManager migration) and hop
run_on_*_callbacks onto the UI thread via
CallAfter, snapshotting under the mutex on the
worker first. Keeps wx subscribers off the
detached load/unload workers.
Only one action source ever existed, so the
IActionSource interface and ScriptActionSource
are gone. ActionRegistry now subscribes to the
plugin loader and enumerates actions directly
in init() - no polymorphism for one impl.
Replace the opaque FNV-hash SpeedDialActionId
with a readable composed id of the form
prefix:title:source_key. Split AppAction's
single source field into source_key (stable
identity, e.g. plugin_key) and source_name
(display), so identity and display no longer
share one field.
* fix: impl refactor
* fix: unload/load python module, race conditions, freezes
* remove dead code
* remove extra hook
* remove more dead code
* fix gil run script
Lifecycle callbacks can be registered while
another thread dispatches them, risking races
and iterator invalidation.
Snapshot shared callback objects under a mutex,
then invoke them unlocked to preserve reentrancy
and mutable callback state.
Move plugin capability enumeration, loader
subscriptions, and action construction into
ScriptActionSource. Keep ActionRegistry focused
on generic action state, dispatch, and snapshots.
Use source rather than package for generic origin
metadata so future non-plugin providers share the
same interface. Action IDs and persisted
configuration remain unchanged.
Subscribe before initial enumeration so plugin
events cannot be missed between the snapshot and
callback registration. Add a focused test for
source startup.
Brings in the Plugins dialog as-you-type search with fuzzy match highlighting
and clickable column-header sorting (name, version, source, status) — PRs
#14610 and #14611.
Introduces a plugin capability that runs Python at the seams of Print::process(),
letting a plugin read and rewrite slicing state as it is computed.
- New slicing_pipeline_plugin config option; selected plugin refs are serialized
into the print manifest.
- Print gains an injectable hook fired at each pipeline step (posSlice,
posPerimeters, posInfill, ...). It is a no-op when unset, fires only on genuine
(re)computation, and never on the use-cache path.
- orca.slicing submodule: SlicingPipelineCapabilityBase plus a trampoline and a
Step enum. Capabilities read the live graph through zero-copy int64 numpy views
(contour/holes geometry with unscaled coordinates, flattened toolpath data) and
edit it through 2D-geometry mutators with cache-invariant refresh.
- GUI dispatcher runs capabilities during slicing under the GIL, turns plugin
errors into slicing errors, honors cancellation, and adds the plugin picker.
- Ships the InsetEverySlice sample plugin and binding/hook tests.
Fix Unit Tests CI job silently running zero tests
scripts/run_unit_tests.sh selected tests with `ctest -L "Http|PlaceholderParser"`,
but catch_discover_tests() was called without ADD_TAGS_AS_LABELS, so Catch2 tags
were never registered as CTest labels. The -L filter matched nothing and the job
passed green while running no tests ("No tests were found!!!"). Tests have not run
in CI since PR #11485 added that -L line (2025-12-23).
Register tags as labels via a shared orcaslicer_discover_tests() wrapper in
tests/CMakeLists.txt (passing ADD_TAGS_AS_LABELS), routed through all five test
suites. Restore full-suite execution by replacing the narrow -L selection with a
`-LE NotWorking` exclusion, so all reliable tests gate PRs again (the suite ran in
full before #11485).
Tag the two OrcaCloudServiceAgent display-name tests [NotWorking]: their
constructor reaches wxStandardPaths::Get().GetUserDataDir(), which dereferences
the null wxTheApp in the headless test binary and segfaults on every platform.
Excluded until the agent can be constructed without the wx app context.
CI now runs 151 tests (was 0) and passes.
* Add OrcaCloud sync platform and preset bundle sharing system
Introduce OrcaCloud, a cloud sync platform for user presets, alongside
a preset bundle system that enables sharing printer/filament/process
profiles as local exportable bundles or subscribed cloud bundles.
OrcaCloud platform:
- Auth to Orca Cloud
- Encrypted token storage (file-based or system keychain)
- User preset sync with
- Profile migration from default/bambu folders on first login
- Homepage integration with entrance to cloud.orcaslicer.com
Preset bundles:
- Local bundle import/export with bundle_structure.json metadata
- Subscribed cloud bundles with version-based update checking
- Thread-safe concurrent bundle access with read-write mutex
- Canonical bundle preset naming (_local/<id>/... and _subscribed/<id>/...)
- Bundle presets are read-only; grouped under subheaders in combo boxes
- PresetBundleDialog with auto-sync toggle, refresh, update notifications
- Hyperlinked bundle names to cloud bundle pages
Co-authored-by: Sabriel Koh <sabrielkcr@gmail.com>
Co-authored-by: Derrick <derrick992110@gmail.com>
Co-authored-by: Mykola Nahirnyi <mnahirnyi@amcbridge.com>
Co-authored-by: Ian Chua <iancrb00@gmail.com>
Co-authored-by: Draginraptor <draginraptor@gmail.com>
Co-authored-by: ExPikaPaka <112851715+ExPikaPaka@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Co-authored-by: Ocraftyone <Ocraftyone@users.noreply.github.com>
Co-authored-by: yw4z <ywsyildiz@gmail.com>
Co-authored-by: peterm-m <101202951+peterm-m@users.noreply.github.com>
* Fixed an issue on Windows it failed to login Orca Cloud with Google account
* Get libslic3r tests closer to passing
I can't get geometry tests to do anything useful. I've added extra
output, but it hasn't helped me figure out why they don't work
yet. That's also probably the last broken 3mf test doesn't work.
The config tests were mostly broken because of config name changes.
The placeholder_parser tests have some things that may-or-may-not
still apply to Orca.
* Vendor a 3.x version of Catch2
Everything is surely broken at this point.
* Allow building tests separately from Orca with build_linux.sh
* Remove unnecessary log message screwing up ctest
Same solution as Prusaslicer
* Make 2 TriangleMesh methods const
Since they can be.
* Move method comment to the header where it belongsc
* Add indirectly-included header directly
Transform3d IIRC
* libslic3r tests converted to Catch2 v3
Still has 3 failing tests, but builds and runs.
* Disable 2D convex hull test and comment what I've learned
Not sure the best way to solve this yet.
* Add diff compare method for DynamicConfig
Help the unit test report errors better.
* Perl no longer used, remove comment line
* Clang-format Config.?pp
So difficult to work with ATM
* Remove cpp17 unit tests
Who gives a shit
* Don't need explicit "example" test
We have lots of tests to serve as examples.
* Leave breadcrumb to enable sla_print tests
* Fix serialization of DynamicConfig
Add comments to test, because these code paths might not be even used
anymore.
* Update run_unit_tests to run all the tests
By the time I'm done with the PR all tests will either excluded by
default or passing, so just do all.
* Update how-to-test now that build_linux.sh builds tests separately
* Update cmake regenerate instructions
Read this online; hopefully works.
* Enable slic3rutils test with Catch2 v3
* Port libnest2d and fff_print to Catch2 v3
They build. Many failing.
* Add slightly more info to Objects not fit on bed exception
* Disable failing fff_print tests from running
They're mostly failing for "objects don't fit on bed" for an
infinite-sized bed. Given infinite bed is probably only used in tests,
it probably was incidentally broken long ago.
* Must checkout tests directory in GH Actions
So we get the test data
* Missed a failing fff_print test
* Disable (most/all) broken libnest2d tests
Trying all, not checking yet though
* Fix Polygon convex/concave detection tests
Document the implementation too. Reorganize the tests to be cleaner.
* Update the test script to run tests in parallel
* Get sla_print tests to build
Probably not passing
* Don't cause full project rebuild when updating test CMakeLists.txts
* Revert "Clang-format Config.?pp"
This reverts commit 771e4c0ad2.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
Kris Austin