This has no any influence on function. Just make
the limitation more clear and easily maintained.
So people can easily see timelapse function is not
supported in i3 printer
JIRA: none
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I0c88a5a0ce4b7e42117842c9673e1df022fdf618
Z height after timelaps gcode is changed. Should get
the new z height and save into gcode writer.
Jira: none, bug is found by self-test
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I25516def507782600f0f270a339c88ea01a472a3
Updating position to gcode writer in wipe tower
miss plate offset.
This is handling for github issue #2256
github: github issue #2256
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I915591ee919d10bb5bd2c2dcd5f1e98fd4b66503
Updating position to gcode writer in wipe tower
miss plate offset.
This is handling for github issue #2256
github: github issue #2256
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I915591ee919d10bb5bd2c2dcd5f1e98fd4b66503
We planed to skip uncessary filament changing when skip
object. However, this caused color mixing.
If we try to fix the color mixing issue, the flush gcode
should be generated by printer itself. This is not a short
time job.
So currently we never skip changing filament when skip
object. This will not save much time and flushing. But better
than none.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I6046cd2765cf68058712b4256402acc0be771144
(cherry picked from commit 7cbd0b35671518636dcca173220b25f6dc18ec1f)
What: As title. The original code is always apply
at the end of last object of last layer, whichi is before
layer change
Why: the fan spped will be skipped if the last object is
skipped. So we must move the layer time fan speed setting
after changing layer, where is common gcode block and does
not belong to any object.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I442f80e00778b524576210b451f81dd15e25e14c
As title. This function need to be used in calibration
page.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ia4228cbd195d87f433b59bc14129bd4acdd9df68
This is fix for jira-3493
Remove duplicated height pairs when add height range
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If74c1f8af1c911d709b9582a15ea8852630c1a67
Useless for BambuPrinter. But used by third party printer
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib6a63e78816b25696c25952508f76c3d9221e363
Mark code from OrcaSlicer with same comment tag for follow easily
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If4db502a1b0e6d0648c73f2f383b6d1cc8e1aa01
Thanks OrcaSlicer.
This is just function for klipper printer.
NEVER used for BBL printer.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I910abceb67f4dcb4260f74f5dd1b4fb614812670
This is fix for jira-1774, jira-2260, jira-2997.
This is also fix for github issue 1821.
Very old issue...And all caused by same reason.
Instance shift are too large for multi-plate,
which causes overflow in 2D boolean and generates
overlapped brim line.
Only apply local instance shift without plate shift.
And apply the plate offset at last step.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I23f7d1ec75c76dea1b4f5332f16ea8a3db14bddc
Should never use these two setting for bambuPrinter.
Thanks original code from OrcaSlicer.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ifda4086b71fd2ef170b044c7632d15fe2ef490fd
Thanks OrcaSlicer.
Also fix wrong setting id of these profile
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib34a46d1b1ae5681b755a7f5b1ef227b502b5262
Thanks OrcaSlicer. Also fix wrong
setting id in orca profile
Add one py file to check whether has duplicated setting_id
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I8461a1ae754253d8265ae5239fe91cc7ec775564
Thanks orca-slicer. Also fix the wrong
setting id from orca.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I68363dbc2a261a6ae13ac5569972446e032e77f0
Enable label object when does not print with multi
filament and object number is smaller than 65
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id670c6a5258f266076bc0a52c50ab5a28386f242
(cherry picked from commit 40248347908788ce6303ed255826011127d8eaa3)
This can avoid to simplify wall twice when
the only invalid step is infill.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie5a9ccc10d5331c29c716aece08cdb195352cfe3
These two settings is necessary for some
specific user case.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9d70679932ac90c34296393d0e8bb8aebd8ebe48
1 limit the range of setting
2 avoid too dense points when fuzzy skin enabled
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I6691fd03d2aa960b055b68100dfb338b640cb4af
Fix for floating layer under multi-color
printing while z_hop is zero.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I8cc96bd18020cac8424fe4c3e62fb87da118b826
This is fix for STUDIO-2079 that slicer may hang
when generated archimedean chords pattern lines.
Thanks prusa.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I923c1ef48f093b2ab9576cb04beb4787c903ca00
Don't know why this file is missing when cherry-pick...
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Iddfba50ef885fa08078bb9723a6ae2d5d5d0289d
"std::cout << float number" is unsafe which
may use , as decimal point when switch language.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I8a379117168eab0111dc93987b1d6130a741ade6
"std::cout << float number" is unsafe which
may use , as decimal point when switch language.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I8a379117168eab0111dc93987b1d6130a741ade6
This placeholder will be used by start gcode
to avoid calibrate support filament which is
the first filament.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I7c8d206346bf3d3a5325c06abb24c58834f7f505
Previous precision is not enough, and some mesh is not
of good quality.
This is handling for github issue #825
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I68901b41c1a3279c61678dbbcc93c887020f18a7
Using layer z to calculate total layer number is not
precision, because for some models with sharp top
layer, the top layer may be empty.
Check the final layer change in final gcode file.
This must be same with total layer number.
Jira: Studio-2123
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I5d001a8bb9548c3fb5f67fda966051ac3bb16502
Merge numerically very close Z values when calculate
total layer number
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I4e60ca69fe5b06b66283d6a763d0b231c3d11b5a
Seperate travel time from extrusion role time and
show it seperately.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Icf0aaf63c4d4ed7d1407037e5ae051d61938f973
This is fix for jira 2061
Layer height is double and may has small difference, which
influence total layer number when support is enabled.
Should use int data and consider EPSION when calculate total
layer number.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I1bb6c89f2afd162d2d7e7dcff4a9d6a00b94dab3
For pa-cf, the default setting of cooling is
forcing cooling for all outer wall.
And internal tester found that the slowing down by
layer time does not work for outer wall under
this situation.
This is fix for this issue.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I05aaa16d246f5ea6dc1ae9808050e1281646e184
Start gcode of P1P is wrong.
This is for github issue #1044
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id078b7c9020ef773373c3486f74dc51385b9dcc0
Clipper2 doesn't solve wrong line issue for some
specific model and sometimes has performance issue.
Return to clipper1.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I906f8b81083ac8c03ecc9fe3e8d2ade20be95c04
Clipper2 doesn't solve wrong line issue for some
specific model and sometimes has performance issue.
Return to clipper1.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I906f8b81083ac8c03ecc9fe3e8d2ade20be95c04
This is fix for jira STUDIO-1501
Global_endpoints should not include seam vertex.
So the initial value should be gcode_ids.size(),
rather than m_move_vertex
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Id4162e63640509521cc7c76bc0d860f27e0c316e
When fuzzy skin is used, it's unmeaning to calculate
the overhang degree of extrusion line, because there
are a lot of random fuzzy point which change the line.
Disable in this case. This can also speed slicing up
when fuzzy skin is used.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ia65e20e24fd7a5cd224635fd69a272387135ba12
This is fix for z hop issue that z hop of
layer change is always spiral list even when set
to normal lift
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I7b235a640b0538bedfe4cef61ca24108c1ba7246
Detour travel is wrong in multi color printing when
current position is unclear.
Don't generate detour travel in this case to avoid
colour mixture.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I2d24b04d99b8a0b34a46c9f88e522e97cb0fe354
Smooth timelaps has wipe tower and cause seam in vase
mode. Don't support
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I7aef1fc1ec2f5d57713fcc01e45ce99f385471c1
(cherry picked from commit 671203ada7c5d48a4eabad156d68d7cb1bb37b54)
As title
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I82a17cd8f82a87a898f933b5437836667136d834
(cherry picked from commit aedfffc4565113f186a55efa0e89366880a22fc6)
This is useful and need to be tuned
for some special 3-rd party filament.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I0527484d47c1bb9c89d5cc70bbaa34b5078b7e43
Move setting tab position according to user suggestion
in github issue #494
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie5b62e57d6d4c19504f40c62ffeff1418ceee1f8
Bambu pa-cf has been modified, generic pa-cf
should be changed as well
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ie859b41bd4d138a5fab204d6ad6a79806c3f0a9b
For some corner case, the bridge detect may choose the long
distance rathan than the short distance.
Calculate the percentage of archored lines and choose
the shortest length
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ia74842f3135681373f649a014c270a1b9d1755e7
It's necessary to edit nozzle diameter and releted
setting for 3rd printer.
For BBL printer, keep it read-only
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I97e32967bb686b7fbb7ac306a2bb7e03b5d8c5c5
Refer to prusa and enable arachne for wall.
Arachne also has corner case and cause strange
slicing result and bad quality when print, while
class engine is much better for these cases.
Provide option for user to choose.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ieb3a1c6a457ca610561f8734de4a122d74165afd
For very narrow bottom bridge, it's useless and even
harmful to be printed as bridge. Eliminate it.
This is handling for github issue #298
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I1dc614781a028716a6de59454577f0b7f3b5b1f5
1 Use 25% infill density. 60% is too high and useless
2 update filament change gcode
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I9a1fbbfb56b61723aa6e9d6bc44a22f467d92562
Should not insert new line in post process
which changes the the final line id in gcode
file
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ib8b837cf313a1308260db88bf5390fefe9708cc8
When travel in x-y-z move, the acceleration should
be limited by trivector rather than one axis.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: If8e5d394cf5d8772d324b9c851c047d9235d9b6b
salt.wei