Each vendor's system presets serialize into a single <vendor>.opc built at
package time, and a shipped build carries that file alone — the profile JSON
and its sub-file tree are pruned. The vendor loader, the setup wizard's profile
list and the resource installer all read a vendor through its cache, falling
back to parsing whenever one is absent, stale or unreadable, so the cache stays
an optimization and never a source of truth. Caches hold presets in source form
and resolve inheritance at load, through the same code the JSON path uses.
apply_vendor_preset_group was copying fields manually and missed
bundle_id, user_id, base_id, sync_info, updated_time, key_values,
ini_str. Replace field-by-field copy with move assignment of the
fully-deserialized Preset, then restore the vendor pointer which
is excluded from serialization.
Replace N per-vendor .cache files with a single system_presets.cache
that holds all vendors and presets in one serialized blob.
Cache load is now all-or-nothing: on hit all vendors are applied from
the bundle (sub-second); on miss all vendors are parsed from JSON and
a fresh bundle is written to the user cache dir.
Invalidation is driven by bundle_key - a sorted concatenation of all
vendor JSON version strings. Any vendor update invalidates the whole
cache and triggers re-parse on next launch.
Guide wizard (WebGuideDialog) loads the bundled cache into a plain
PresetBundle instead of a separate VendorGuideData struct, removing
the duplicate data model.
generate_system_cache simplified from a per-vendor loop to a single
save_system_presets_cache() call producing one output file.
# Description
On Klipper the wipe tower's motion-queue synchronization silently did
nothing. Klipper acts on commands the moment it parses them, and its
`G4` reads only `P` in milliseconds — it ignores `S` — so the `G4 S0`
the tower used to flush the queue before a temperature change never
synchronized anything, and the cooling delay after a filament's cooling
moves passed instantly instead of waiting. The tower now emits `M400`
for the flush and `G4 P<ms>` for the dwell when the flavor is Klipper.
Only `gcode_flavor = klipper` is affected; G-code for every other flavor
is byte-identical, so no shipped profile or existing project file
changes.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
The wipe tower's "Delay after unloading" never happened on Klipper. It was
emitted as G4 S<seconds>, and Klipper's G4 reads only the P parameter, in
milliseconds, so the pause was silently skipped. The option now produces a
dwell Klipper actually performs.
Also corrects the planner flush rationale, which cited an extruder position
reset that Klipper resolves at parse time and does not need synchronized, and
adds end-to-end coverage that slices a two-filament print and checks the
emitted wipe tower G-code on both a Klipper and a non-Klipper flavor.
No change to any other firmware flavor's output, and no shipped profile sets a
non-zero delay, so no shipped profile's output moves either.
The wipe tower emitted G4 S0 to make the firmware finish its queued moves
before commands that must not take effect early. Klipper's G4 reads only the
P parameter, so that flush never happened there and a temperature change could
land seconds ahead of the moves it was meant to follow. Klipper now gets M400
instead, through one helper shared by both wipe tower implementations.
No change to any other firmware flavor's output, so no shipped profile or saved
project is affected.
* update snapmaker profiles. largely ported for Snapmaker Orca fork
* update prime volume
* set precise_outer_wall to 1
* Update per-material multi-tool ramming to the filament library
* Add per-filament overrides for toolchange retraction
* Set toolchange retraction per filament for Snapmaker U1
* set default support type to tree
* format snapmaker profiles
The linear approximation used a heuristic segment count clamped to 4..16, so the
lift ran as a coarse polygon. Every vertex is a direction change large enough to
hit the firmware's jerk limit, forcing a decelerate/accelerate at each corner —
the lift micro-stutters instead of running at speed. The segment count now comes
from the chord deviation against the slicing resolution, reusing
Geometry::ArcWelder::arc_discretization_steps, which keeps the turn at each
vertex shallow enough for the firmware to carry speed through the whole move.
Points are emitted through GCodeG1Formatter so they carry the same quantization
as the rest of the G-code, and the move comment now trails the feedrate line to
match _travel_to_z and the G2/G3 branch. No change when arc fitting is enabled.
* fix: make the error dialog caret point at the character it's blaming
Custom G-code parse errors print the offending line with a '^' under the
character that broke, positioned with spaces so it only lines up in a
fixed-width font. Since v2.3.2 these dialogs rendered entirely in the
proportional UI font, so the caret drifted left of its column and landed
on unrelated text.
Render only the code excerpts (the offending source line and its caret) in
the fixed-width face, leaving the surrounding prose in the UI font, and
reserve the horizontal scrollbar's height so a long line does not clip.
Rename the flag to has_code_excerpts to match what it now means.
Fixes#14869
* refactor(GUI): use <code> instead of <tt> for error excerpts
wxHTML maps <tt>, <code>, <kbd> and <samp> to the same fixed-width
handler, so this renders identically. <code> is the non-deprecated
tag and matches what the original code used.
* fix(GUI): align the error caret with real spaces, not
The caret line was padded with so its spaces would survive inline
HTML. wxHTML measures every glyph by its font extent, so where the fixed
font lacks a U+00A0 glyph the fallback renders it about twice as wide, and
the all- caret line outran the source, drifting the ^ to the right.
Wrap the excerpts in a small <excerpt> tag, registered on the dialog's own
parser, that switches on wxHTML literal-whitespace mode so the caret uses
real spaces that match the source column in any font. It sits inside <code>
for the fixed face; <pre> would do both but forces a blank line above it.
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
Replace per-printer auto-activation
(is_current_printer_agent_plugin)
with a global experimental AppConfig
toggle, default off: legacy
print-host behavior is unchanged
until the user opts in. The toggle
drives device-tab routing, print
button defaults, connect-button
visibility and sidebar layout, and
dedups machine-select dialog opens.
