1.Add automatic calculation of the wipe_tower's brim width by height；
2.modify the min_depth_per_height and the default ridwidth
jira: none
Change-Id: Idd96bc90e8e631aa8481b559e1e9fec24c6b822f
(cherry picked from commit 4dd4e9e12c02d945a0ac3fd2020f75313c5b2cc9)
The old speed 50mm/s is too high and cause some print quality problems.
Also change the display of overhang speeds to better adhere to the code.
jira: STUDIO-9641
Change-Id: I6efa981db5bf88a9cf5bb70abb443cdfa1783025
(cherry picked from commit 979fefffd528ab1fb4e670fd88f716a3aed2e6f2)
when obj is small, it uses the full build volume to compute the empty cell
we need to use the shared one
jira: STUDIO-9583
Change-Id: I4cc183df38e054a7b94579637a49168c2fb77992
(cherry picked from commit fea423cdad4ee1a24c077cfeed99962e89953d5b)
(cherry picked from commit 06d483ee462f6b1a7a3f39805c81ac0b6f0dfcca)
1.Add more filament map modes
2.Filament map and mode are set as project config
3.Plate filament map is only valid when plate filament mode is
manual
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I33b2f853e0b77b9d605be1f2f1172b44df43da15
(cherry picked from commit e45f8c6dc2146e1e31a1c21e8aaada540af112d0)
jira: STUDIO-9131
reason: sometimes the popup window causes Print::Apply using invalid configs
Change-Id: I1764050f7177a65625f4668b2e1f86c80a4d4e5a
(cherry picked from commit 5a32ce3599883b9976e32ef2c864967efd52fbc2)
(cherry picked from commit e16da5da85bc8b758e79223581c21fdd98a89a25)
* refactor Infill rotation template
* clean up comments
* set default solid_infill_rotate_template to empty
* Fix an issue that infill_direction solid_infill_direction not working as expected
* Add Extra Solid Infill Feature
Introduced a new feature to insert extra solid infills at specific layers for enhanced strength in 3D prints.
* fix doc error
* fix image name
* support "#K" for Explicit Layer List
* update wiki
* refactor Infill rotation template
* clean up comments
* set default solid_infill_rotate_template to empty
* Fix an issue that infill_direction solid_infill_direction not working as expected
* update based on feedback
JIRA: STUDIO-9111
Change-Id: I5ed619d57b6857f5d4a1e38662d2fe03640222a3
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit 993228d3e99e7976a3839b29453b53023ec18b71)
1.Always set filament retract params to filament_num size.In
gcode export module, we can always use filament idx to get
retract params
2. add logic in update_filament_maps_to_config to update the
retraction related params which can be overiden by filament
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia45dd1401aa3565d062d5da1c9f4a2ba8966f693
(cherry picked from commit 4b083d8d8220b8f65a1b804688cb2d6e238eb4e6)
The length of default value for extruder printable height
should be same with extruder printable area
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I01bf5e2a9ddb2faadbbe0a01f4ff2c5582b8ac45
(cherry picked from commit 01bb0c6d661f1d72448782523fb612b2aabfec00)
and modify the min_depth_per_height
jira: none
Change-Id: I4860df661b4dd1f66677112d14e60560bc4a73be
(cherry picked from commit 00810d685d01a91b5373f3315413aaef1fe49cbc)
to support different printable height of multi_extruder
jira:none
Change-Id: I265c65e15fc8f598c3456556557bb6977b5de820
(cherry picked from commit 933adbaaf0eaf361e39f131dd5536dca91214d43)
1. add slicing errors for gcode in unprintable area, also for filament mapping
2. use common area for auto arrange
3. support filament_map/filament_map_mode related params
4. add logic to check the filament maps before slicing
5. uptodate support multi-extruder
6. switch new machine/filament support multi-extruder
7. process config params support transfer between mult-extruder and
single-extruder
8. improve machine-limit logic support multi-extruder
9. flush-volume support multi-extruder
10. add default params to support auto mapping slicing
jira: no-jira
Change-Id: Ice39a365841322ddb586d39c56ff923626822528
(cherry picked from commit f518d6804a9de69deef81c20cd22005a4bbd0cd4)
1. Machine with multi extruder should set length of extruder offset
to extruder num
2. Register retract_restart_extra
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic3eb324cb91dc70b091c8922936d2709c361cc38
(cherry picked from commit 13df1ee7bab2bf13c9f5ffca6ad1228ff48e885e)
1.Use max flow network to handle limit
2.Support setting master extruder id
3.Fix the issue in the KMedoids algorithm where data is overwritten
after each retry.
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Idd2bedf39f61e7a65eb4199852f60b8fbebe0a7d
(cherry picked from commit 3cfb49a1b9dc2c76066ec441f1028f99a4bf99c4)
1. also remove original nozzle_volume_type from printer
and move into project config
2. support save nozzle_volume_type into appconfig
and load from it at beginning or printer switch
jira: no-jira
Change-Id: I01fc82d142fc633fc59a238796a71b9f8d180efb
(cherry picked from commit fe8b904e7551cde83b1ead75922e9b60278b50ad)
2. modify the filament_flow_ratio to nullable
jira:none
Change-Id: I3f0569ee643cfe9473c6029ca0e04f4b80c8332e
(cherry picked from commit ed61d1d31bdc79f064567deacf35e05bd123880d)
1. Nozzle Volume and Nozzle Type support multi extruder now
jira:NONE
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie171b5105bd3830db3a992cadd365b785008c47a
(cherry picked from commit 2ebd14667e43dc745556f5e7bcbb7c2ccad4a007)
1.During the filament change, the extruder will extrude an extra length
of grap_length for the corresponding detection, so the purge volume can
reduce this length.
jira:NEW
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I14f55a3200c1dd48b1603e50280d0c29e1319ebe
(cherry picked from commit 16cadec565f987e6baae97428d5392c1f8e7ad39)
