update_values_from_multi_to_multi_2 iterates the destination PRINTER's variant
list while writing into a row taken from the destination PRINT preset. Those two
lengths are maintained independently -- print_extruder_variant against
printer_extruder_variant -- and Tab::load_current_preset() runs the migration
before the print preset is re-selected for the new printer. Opening a project
saved on a single-variant printer and switching to a seven-variant one therefore
wrote six elements past the end of a one-element vector. The corruption stays
silent until the next allocation, so the abort surfaces somewhere unrelated and
the backtrace points at innocent code.
Size the row to the variant count before indexing it. Every write is then in
range, and the result carries one value per destination variant, which is what
the callers consume. Pad with nil rather than a copied value: set_to_index()
skips nil entries, so a variant the object has no opinion about keeps tracking
the print preset instead of being pinned to another variant's number.
The same shape -- a count from one array indexing another -- appears twice more
in this file. update_values_from_multi_to_multi has three of these writes
protected only by assert(idx < old_count), and NDEBUG is defined for every
non-Debug configuration, so those guards are absent from shipping builds.
update_values_from_single_to_multi has the read half. Both are bounded here;
leaving them would fix one third of one defect.
Source reads are bounded too. is_nil(size_t) indexes values[idx] without
checking, so an index past the end was undefined behaviour on that side as well.
Where the row already matches the variant list -- every case that was not
corrupting the heap -- the resize is a no-op and the output is unchanged.
Fixes#15455
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Brings in 54 upstream commits, the bulk of them the BambuStudio-ported color
mixing / mixed filament subsystem (#15347) plus its follow-ups, along with the
Assimp-backed colored OBJ import, warning-policy build changes, and assorted
profile and localization updates.
Two conflicts, both "each side added at the same point", resolved by keeping
both:
- Print::validate() -- our IMEX multi-color block and upstream's new gradient
mixed filament warning were inserted at the same spot after the empty
extruders check. They test unrelated conditions, so both are kept, each with
its own closing brace.
- tests/libslic3r/test_3mf.cpp -- our three IMEX per-plate round-trip scenarios
and upstream's mixed-filament round-trip scenario both append to the end of
the file, and each side added one include. All four scenarios and both
includes are kept.
Everything else merged cleanly, including GCode.cpp, ToolOrdering.cpp,
PartPlate.cpp and PrintConfig.cpp. Upstream left the is_extruder_used block
untouched, so the IMEX supplement still applies, and estimate_wipe_tower_polygon
is unchanged, so the prime tower hull work is unaffected.
Not addressed here, and worth its own change: a mixed filament is a virtual slot
that no nozzle carries, while physical_extruder_map routes logical slots to
physical heads. Print::extruders() lists mixed slots under their own id whereas
tool_ordering.all_extruders() lists them post-expansion, so the IMEX pem lookups
have no defined answer for a mixed slot. Upstream's own guards reject a mixed
filament where a physical slot is required; IMEX likely wants the same.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Upstream replaced MainFrame's fixed-index TabPosition enum with string-based
page ids ("feat: refactor notebook/tabs to be string based instead of fixed
index based"). The IMEX toolhead-visibility menu item was the only consumer of
that enum left on this branch, so its enable check now compares
m_tabpanel->GetSelectedPageName() against TAB_ID_PREVIEW -- the same form the
neighbouring upstream menu items use.
That mismatch is what broke CI: the branch built on its own, but the merge
commit CI builds no longer had TabPosition declared. No other conflicts.
666/666 tests pass in Release.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Adds a printer option that picks up the new tool without a blocking temperature
wait, travels to the wipe tower, and waits there right before purging, parked
beside the tower so the ooze from the heat-up lands next to it rather than on the
model. The incoming filament's target is raised ahead of the tool change, so the
heat-up overlaps both the change itself and the travel to the tower.
Off by default, and only offered for multi-extruder printers using a Type 2 wipe
tower; the generic toolchanger profile enables it.
* update snapmaker profiles. largely ported for Snapmaker Orca fork
* update prime volume
* set precise_outer_wall to 1
* Update per-material multi-tool ramming to the filament library
* Add per-filament overrides for toolchange retraction
* Set toolchange retraction per filament for Snapmaker U1
* set default support type to tree
* format snapmaker profiles
Labels, tooltips, menu items and dialog text mixed "IDEX/IQEX" with "IMEX"
for the same feature. IMEX is now the user-facing name throughout: IDEX and
IQEX are hardware categories, IMEX is the feature spanning them. The
hardware terms remain only where they help a user tell whether the feature
applies to their printer.
Comments and log messages keep IDEX/IQEX, where the specific carriage
topology is the more precise term.
Also corrects the imex_parallel_mode tooltip, which pointed at a
"Printer -> IDEX/IQEX tab" that does not exist; the options live under
Printer -> Multimaterial -> IMEX Configuration.
None of these strings appear in any .po or the .pot, so no translation is
affected.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Sync WipeTower from BambuStudio(through ca1881761)
* Fix post-slice self-invalidation on custom multi-extruder printers
* Complete the rib wipe tower port in WipeTower2
The rib tower is now always square (prime_tower_width is ignored, as the
GUI already implies), carries the rib origin offset like the BBL tower so
the rib tips sit inside the configured position, clamps the rib length to
the tower diagonal, and extends the ribs for short towers.
* Use the squared rib tower size in arrange estimates
estimate_wipe_tower_polygon reserved the arrange footprint and clamped the
tower X position with the raw prime_tower_width, under-reserving space
whenever the rib wall squares the tower to a different width.
* Print the WipeTower2 shell with a non-support, non-soluble filament
Like the BBL tower: the layer's sparse infill, wall, and brim go to the
first toolchange to a non-support/non-soluble filament, or are printed
with the incoming filament before any toolchange. The minimal-purge
clamp now also covers toolchanges that get no finish-layer saving.
Output is unchanged when no support/soluble filament is used.
* Port the skip-points gap wall to WipeTower2
prime_tower_skip_points was stubbed for Type2 towers: the wall call
hard-coded skip_points=false, the gap cutter received an empty vector,
and append_tcr2 never routed the entry travel. Now the toolchange entry
positions are precomputed from the finalized plan, the wall is cut open
at each entry, and the entry travel approaches around the tower bounding
box through the opening when it starts outside the tower. The geometry
helpers are re-synced with the BBL versions (add_extra_point guards,
per-point side selection). The cone wall keeps its separate path, where
the option stays inert.
Behavior change: non-BBL towers now honor the (default-on) checkbox with
gap walls and routed entries; with the option off the output is
unchanged, and the BBL tower path is untouched.
* Route the in-place toolchange tower entry through the skip-point gap
On multi-tool printers without ramming the tool changes away from the
tower and the entry travel is the tcr's own positioning move, which went
straight across the printed wall. Append the avoid-perimeter path to the
change-filament gcode instead, so the head approaches around the tower
and enters through the wall opening (append_tcr parity).
* Iron the purge start out through the skip-point gap in WipeTower2
Port the BBL tower's entry line ironing: extrude the first 3 mm of the
purge, retract, drag the nozzle 1.5x back out through the wall gap at
F600, creep back at F240 and unretract, so the toolchange start blob
ends up in the gap instead of on the wall. Fires only when the purge
starts at the left-edge entry heading right (in-place toolchangers);
SEMM ram/cooling wipes start mid-box and the priming line has no wall,
so both keep their previous output.
* Reserve WipeTower2 toolchange depth to match the printed purge
The planner reserved ramming rows gated only on enable_filament_ramming and
sized them with the SEMM 0.25s time step, while toolchange_Unload rams on
(semm && enable_filament_ramming) || filament_multitool_ramming with the
multitool time step. Disabling multitool ramming therefore left ~3 unprinted
rows per toolchange as blank bands in the tower. Without ramming the first
wipe line also needs reserved depth of its own (it no longer rides the last
ramming row), plus the y_step/2 offset the wipe start inherits from the
ramming start position - otherwise the tightened boxes truncate the ordered
purge at the box edge.
* Tile WipeTower2 purge rows contiguously across toolchange blocks
Without ramming, each purge block reserved one wipe pitch more than its
rows occupy (ceil+1 rounding plus the ram-geometry start offset), and the
wipe began a full pitch inside the block, leaving a blank band of exactly
two pitches between adjacent blocks. Plan the block as whole wipe rows,
start the first row so the row lattice continues across the block
boundary, and fill the reserved box instead of stopping at the ordered
volume, mirroring how the BBL WipeTower keeps planned depth identical to
printed rows. Ram-printing toolchanges (SEMM with ramming enabled,
multitool ramming) are unchanged.
* Scrub the WipeTower2 toolchange entry with the BBL flat-ironing spiral
The entry scrub now matches the BBL tower's toolchange_wipe_new sequence:
after the ironing drag the retracted nozzle runs a dry expanding-square
spiral centred on the wall-gap entry point before resuming the purge row.
The spiral runs whenever the gap wall is on (disable per filament via
filament_tower_ironing_area = 0); WipeTower2 no longer reads
prime_tower_flat_ironing.
* Restart the WipeTower2 wipe at the box boundary after multitool ramming
With the gap wall on a multi-tool printer, quantize the ram band up to its
whole reserved rows (as the BBL tower does for the old-tool purge) and start
CP TOOLCHANGE WIPE at the left-edge boundary on a fresh row below it instead
of continuing from wherever the ram serpentine ended. The entry scrub then
runs at the wall gap on ram toolchanges too, and the wipe box is whole rows,
so it is filled completely like the no-ram case. SEMM and skip-points-off
behavior is unchanged.
* Move the WipeTower2 wall gap to the wipe start row for ram toolchanges
* code cleanup
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* fix typo
---------
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
# Description
Changing a slicing plugin's configuration had no effect on the sliced
result until you forced a re-slice some other way; it now applies
immediately. Print, printer and filament presets also keep their plugin
configuration separately, so configuring a plugin on one no longer wipes
out what you set on another.
A plugin's custom configuration page gets the same round of improvements
in both the Plugins dialog and the per-preset dialog: it follows the
app's light/dark theme, keeps its state while you edit instead of
resetting under the cursor, and can tell whether it is being edited
globally or for a preset, so "Restore defaults" can be labeled for what
it will actually do. The two bundled examples show this off — Twistify
now ships a custom configuration UI, and Inspector is themed, groups
# Screenshots/Recordings/Graphs
https://github.com/user-attachments/assets/02ca062a-5143-49a3-abe0-a2a040b3a928
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
## Problem
On H2C (carousel) printers, the wipe tower purge volume calculation in
`_make_wipe_tower()` tracks filament state **per-extruder** (2 slots).
Since H2C has up to 7 carousel nozzle slots on a single extruder, all
filaments sharing that extruder are collapsed into one tracking slot.
This causes:
Test:
[5cubes.3mf.zip](https://github.com/user-attachments/files/30092551/5cubes.3mf.zip)
- **Massive redundant AMS flushing** every filament change on the
carousel triggers a full purge against the "previous" filament, even
when the target nozzle slot already has the correct filament loaded
- **60.9g total weight** instead of ~17g (**3.5× material waste**)
- **3h09m print time** instead of ~1h57m (**60% longer**)
## Root Cause
The code uses `nozzle_cur_filament_ids[extruder_id]` (a 2-element array)
to track which filament was last used for each extruder. BambuStudio
uses `NozzleStatusRecorder`, which tracks per `group_id` (physical
carousel slot 0..6).
## Changes
| File | Change |
|---|---|
| `Print.cpp` | Replace `nozzle_cur_filament_ids` with
`NozzleStatusRecorder`. Use `get_nozzle_for_filament()` to resolve the
physical carousel slot per layer. Select `filament_prime_volume_nc` for
nozzle changes, `filament_prime_volume` for filament changes. |
| `PrintConfig.hpp` | Add `ConfigOptionFloats filament_prime_volume`
(per-filament EC prime volume, missing from upstream but present in BBS
and H2C profiles) |
| `PrintConfig.cpp` | Register `filament_prime_volume` with default
45mm³ (matching BBS) |
| `Preset.cpp` | Add `filament_prime_volume` to preset keys |
Also includes `tests/compare_analyzer/` - two standalone Python tools
for G-code slice comparison and temperature timeline analysis (stdlib
only, no dependencies).
## Test Results (5-color H2C Hybrid print, same 3mf project)
| Metric | Upstream (broken) | **Fixed** | BBS (reference) |
|---|---|---|---|
| **Total weight** | 60.90g | **16.20g** ✅ | 17.47g |
| **Print time** | 3h09m | **1h57m** ✅ | 1h51m |
| **Filament changes** | 105 | 105 | 140 |
| **Tool changes** | 35 | 35 | 35 |
| **Critical discrepancies vs BBS** | ⚠️ YES | ✅ None | — |
## Analysis Tools (`tests/compare_analyzer/`)
Two standalone Python tools (stdlib only, no dependencies) for deep
G-code comparison:
- **`compare_slices.py`** - comprehensive .3mf slice comparison:
filament usage, nozzle mapping, tool change sequences, prime tower
analysis, temperature timeline, retract parameters, and automatic
critical discrepancy detection (weight/time anomalies)
- **`show_temp_plot.py`** - interactive HTML temperature timeline
plotter for visualising heater profiles during multi-nozzle prints
(supports single-file and side-by-side comparison)
Usage:
```bash
python3 tests/compare_analyzer/compare_slices.py file1.3mf file2.3mf --labels "Upstream" "Fixed"
python3 tests/compare_analyzer/show_temp_plot.py file1.3mf file2.3mf
```
## Screenshots
### OrcaSlicer Upstream (unfixed) - 60.90g, 3h09m
<img width="1512" height="982" alt="Screenshot 2026-07-16 at 15 22 58"
src="https://github.com/user-attachments/assets/3efb2bff-ff1e-43db-9669-feafa5921b51"
/>
### OrcaSlicer Fixed - 16.20g, 1h57m
<img width="1512" height="982" alt="Screenshot 2026-07-16 at 15 23 08"
src="https://github.com/user-attachments/assets/c1d36dc5-9b01-4691-80ef-7364540e1f4e"
/>
### BambuStudio Reference - 17.47g, 1h51m
<img width="1512" height="982" alt="Screenshot 2026-07-16 at 15 24 52"
src="https://github.com/user-attachments/assets/5c0b11e2-64f4-40e9-8c7c-3f42519786c3"
/>
### Temperature Timeline: Upstream vs Fixed
<img width="1511" height="829" alt="Screenshot 2026-07-16 at 15 23 35"
src="https://github.com/user-attachments/assets/926c2cb5-dfd4-4ce0-bb40-82e6165eb134"
/>
### Temperature Timeline: Fixed vs BBS
<img width="1512" height="825" alt="Screenshot 2026-07-16 at 15 23 51"
src="https://github.com/user-attachments/assets/85c72dda-e779-4aa6-8118-fb17e5f8482d"
/>
## Compatibility
Safe for non-carousel printers: when each extruder has a single nozzle,
`group_id == extruder_id`, so `NozzleStatusRecorder` behaves identically
to the original per-extruder tracking. The `filament_prime_volume`
default (45mm³) matches the existing global `prime_volume` default.
## Reference
BambuStudio `Print.cpp` `_make_wipe_tower()` L3341-3392 -
`NozzleStatusRecorder` pattern.
- WipeTower: use filament_ramming_volumetric_speed(_nc) for ramming, falling back to
max_vol_speed only when nil; gate precool temps on enable_pre_heating
- ToolOrderUtils: disable the inter-layer forecast in the per-nozzle base reorder so
H2D/H2C ordering is unchanged
- PrintConfig: stop stripping filament_prime_volume in handle_legacy; document that
prime_volume drives the Type2 wipe tower and filament_prime_volume the Type1 one
- GCodeProcessor: exclude post-print end-gcode M400 dwells from the M73 estimate and
drop the dead air-filtration state
- Trim verbose BambuStudio source-location comments across the port
Resolved 4 conflicts:
- PrintConfig.hpp / Preset.cpp: upstream restored calib_flowrate_topinfill_special_order
(removed in the prior merge, now re-added and re-registered); kept it alongside our
IMEX options (imex_parallel_mode, imex_head_filament_map).
- Plater.cpp: kept our <sstream> include plus upstream's <optional> and plugin includes.
- tests/fff_print/test_gcodewriter.cpp: both sides appended disjoint scenarios after a
shared base. Reconstructed as upstream's full file (base + its 3 toolchange/H2C
scenarios + the boost/filesystem include its helper needs) followed by our 10
set_pressure_advance / set_temperature scenarios. 22 scenarios total, no duplicates.
The preset option was plugin_preference_overrides while the GUI field type
that renders it was GUIType::plugin_config, for one and the same thing.
Settle on "config": the store, the dialog and the Python hooks all say config
already, so renaming that way touches 4 files instead of the whole plugin
subsystem and the public plugin API.
Keep the _overrides suffix — the option is the preset's override layer over
the base PluginConfig store, a distinction EffectiveCapabilityConfig tracks.
Also wrap the printer tab's group heading in L(); it was the only one of the
three missing it, and was therefore untranslatable.
The upstream _make_wipe_tower() tracked purge volumes per-extruder (2 slots),
which collapsed all H2C carousel filaments into one slot and caused massive
redundant AMS flushing (~40g instead of ~0.4g).
Changes:
- Print.cpp: Replace per-extruder nozzle_cur_filament_ids with BBS
NozzleStatusRecorder that tracks per group_id (carousel slot 0..6).
Use get_nozzle_for_filament() to resolve physical slot per layer.
Select filament_prime_volume_nc for nozzle changes, filament_prime_volume
for filament changes (BBS pattern).
- PrintConfig.hpp/cpp: Register filament_prime_volume (per-filament EC prime
volume, default 45mm³) matching BBS PrintConfig.
- Preset.cpp: Add filament_prime_volume to preset keys list.
Safe for non-carousel printers: group_id == extruder_id when each extruder
has one nozzle, so NozzleStatusRecorder behaves identically to the original
per-extruder tracking.
Reference to BBS: BambuStudio/src/libslic3r/Print.cpp _make_wipe_tower() L3341-3392
Resolve five conflicts, all of which needed both sides rather than a pick:
- BackgroundSlicingProcess: ours was a pure tabs->spaces reformat of base, so
keep main's per-filament volume/nozzle map read-back (its only change here).
- GUI_App: main's #12506 else-if attached to an `if` this branch deleted;
re-expressed onto the same-agent early-return path (the agent factory caches
per id, so pointer equality is the same predicate).
- MainFrame: both sides relocated Sync Presets independently; keep main's
push_notification plus the branch's Plugins menu items.
- Tab: the "TODO: Orca: Support hybrid" blocks were unchanged base, not a branch
decision; take main's enabled Hybrid to match the already auto-merged siblings.
- test_config: union of both sides' cases (6 plugin + 9 multi-nozzle).
Resolved conflicts in PrintConfig.hpp and Preset.cpp. Both were adjacent to upstream's
removal of calib_flowrate_topinfill_special_order (superseded by the new
top/bottom_surface_fill_order options); took upstream's removal from the option class
and the print-options list while keeping our new IMEX options (imex_parallel_mode,
imex_head_filament_map) and the IMEX enums (ImexToolLayout, ImexVizTheme) alongside
upstream's new SurfaceFillOrder enum. The option remains in PrintConfig's legacy
ignore-set so old projects still load.
Conflicts were all co-located additions rather than design collisions:
- GCode.cpp: adopt upstream's toolchange(filament_id, nozzle_id) signature and
per-variant set_config_index() while keeping the IMEX bare-T<n> suppression;
rebase the second-layer temperature loop's non-IMEX branch onto upstream's
get_filament_config_index() resolution.
- Preset.cpp / PresetBundle.cpp / PrintConfig.cpp: keep both sides' option-list
and enum-map entries.
- GLCanvas3D.cpp: upstream's printable_heights argument plus the IMEX ghost pass.
- PartPlate.cpp: keep <set> (still used).
- test_gcodewriter.cpp / test_3mf.cpp: keep both sides' test cases.
Resolves two conflicts:
- GLCanvas3D.hpp: keep both the IMEX ghost render declarations and
upstream's _render_wireframe_overlay().
- test_gcodewriter.cpp: both sides appended test cases to the same
region; keep upstream's origin/machine-limit tests alongside the
pressure-advance and temperature scenarios.
