Declare support_cooling_filter=1 on the three profiles (0.2/0.6/0.8
variants inherit from 0.4) and insert the cooling-filter conditional
into the H2D and H2S machine start g-code, inside the low-chamber-temp
airduct branch:
{if(cooling_filter_enabled)} M145.2 P0 F0 {else} M145.2 P0 F1 {endif}
H2D Pro intentionally gets no g-code edit: its duct firmware takes the
filter mode over the device channel only, so the flag merely enables
the toggle.
Impact on existing users at default settings: H2D/H2S start g-code gains
exactly one line (M145.2 P0 F1, filter off) in the cool-chamber branch;
nothing is removed or reordered. The existing support_air_filtration=1
overrides are deliberately kept so exhaust-fan behavior for ABS-class
filaments is unchanged, even though the machine-tab row is hidden while
the cooling-filter toggle is shown.
cooling_filter_enabled existed as a config option but was shown nowhere,
and there was no capability flag to gate it. The cooling filter and air
filtration are alternative accessories sharing the same duct, so a
printer declares one or the other.
- new hidden printer capability flag support_cooling_filter
- "Use cooling filter" toggle in the Accessory group, shown only when
the printer supports it; the air-filtration toggle hides in that case
(no vendor restriction: third-party printers keep air filtration)
- explicit defaults (0) in the common machine base
- H2C declares support_cooling_filter=1 instead of support_air_filtration;
its start-gcode already carries the cooling-filter conditional, so the
toggle is functional. On H2C this drops the two exhaust-fan lines that
air filtration emitted for ABS-class filaments, matching the printer's
actual duct accessory; H2C is new on this branch so no existing user
output changes.
Printers without the flag keep exactly the previous accessory UI and
g-code.
New printer option fan_direction (undefine/left/right/both, default
undefine) declares which side the auxiliary part-cooling airflow comes
from. When set and the printer has an auxiliary fan, auto-orient adds a
yaw rotation so the dominant overhang area faces the airflow, and newly
added primitive shapes are pre-oriented the same way (except the Cube,
whose axis-aligned bounding box the pressure-advance pattern calibration
depends on).
- FanDirection enum + fan_direction printer option (Accessory group,
enabled only with auxiliary_fan)
- orient engine: weighted overhang areas per candidate, yaw-direction
search, vertical rotation applied on top of the primary orientation;
the cooling weights are taken from the candidate actually chosen,
including the flat-bottom tie-break
- orient_for_cooling() for primitive placement
- set fan_direction=left on H2C/H2D/H2D Pro/X1/X1E/P1S 0.4 profiles
(X1C/H2S/P2S/X2D/Qidi X-Max 4 already carried the key, which now
takes effect)
With fan_direction unset or no auxiliary fan the vertical rotation stays
identity and auto-orient results are unchanged; slicing and g-code are
never affected.
The engine already implements prime_volume_mode (Default/Saving/Fast)
but nothing in the UI could set it, leaving prime-saving unreachable on
multi-sub-nozzle extruders and fast purge unreachable on printers that
support it.
- new PurgeModeDialog with selectable Standard/Fast or
Standard/Prime Saving cards depending on printer capability
- "Purge mode" sidebar button next to Flushing volumes; opens the
dialog and stores the choice in the project config
- printer preset-load gating: button shown only when the printer has
multiple sub-nozzles per extruder or sets support_fast_purge_mode;
stale project values the printer cannot honor reset to Default
- enable fast purge on A2L 0.4 (support_fast_purge_mode), explicit
default 0 in the common machine base
- new dialog strings added to OrcaSlicer.pot
Printers without these capabilities never show the button and their
projects keep prime_volume_mode at Default, so slicing output is
unchanged.
Filament grouping already consumed per-filament forbidden nozzle volume
types, but every call site passed an empty map, so a variant-restricted
filament (e.g. one limited to "Direct Drive TPU High Flow") could be
auto-grouped onto an incompatible nozzle flow type on multi-variant
printers.
- add convert_to_nvt_type() to parse extruder variant strings
- add Print::get_filament_unprintable_flow(): forbidden volume types =
printer extruder variants minus the filament's declared variants;
filaments declaring no variants stay unrestricted
- feed the map into grouping at the by-object path (Print.cpp) and all
six mapping/planning sites in reorder_extruders_for_minimum_flush_volume
- unit-test the string parser
Non-restricted configurations produce an empty map, so existing
printers' grouping and g-code are unchanged.
The FilamentGroup property/golden harness checked a per-extruder
max_group_size cap unconditionally in check_constraints. That cap is an
invariant of the flush-partition solvers only (calc_group_by_enum /
calc_group_by_kmedoids, reached via calc_filament_group_for_flush), which
partition filaments subject to each extruder's capacity.
MatchMode (calc_filament_group_for_match) does not partition by capacity:
it maps every filament to the extruder holding the nearest-color loaded
AMS filament, and its solver capacity is the used-filament count, not
max_group_size (FilamentGroup.cpp:1067). So a legitimate MatchMode result
can place more than max_group_size filaments on one extruder.
The prop_a/b/c_mode_match specs run MatchMode, and their scenarios are
generated with std::uniform_int_distribution / std::shuffle, which are
implementation-defined. For a fixed mt19937 seed, libc++ (macOS), libstdc++
(Linux) and MSVC (Windows) draw different scenarios, so the CI failure only
surfaced on Linux/Windows while macOS passed. Verified locally: 248/600
config-A MatchMode seeds exceed the cap under libc++ — it is reachable
everywhere; seed 90400 just isn't an exceeding draw on macOS.
Gate section 3 on FGMode != MatchMode. No test case is removed or skipped:
all 57 FlushMode specs still assert the cap, MatchMode still asserts the
unprintable-filament/volume correctness constraints (which it honors), and
MatchMode grouping regressions are still caught by the golden score gate at
3% tolerance. Test-only change; slicing behavior and g-code are unaffected.
NfpPlacer stores std::reference_wrapper to the items it packs and re-reads
them from finalAlign() in its destructor (via clearItems()). Two placer
tests declared the placer before the items in the same scope, so the items
were destroyed first and the destructor dereferenced dangling references.
On macOS this is a deterministic SIGSEGV: libmalloc poisons the freed block
on free, so the item's point vector reads back as ~null (deref at 0x8). On
Linux/glibc the freed bytes usually survive, which is why it slipped through
upstream CI (introduced by #14267).
Declare the items before the placer so they outlive it, matching the pattern
the sibling 'packs many items' and 'obstacle' tests already use. Test-only;
the library lifetime contract (items must outlive the placer) is unchanged
and honored in production via _Nester in Arrange.cpp.
fix: prevent startup crash when preset-sync directory scan hits a transient FS error
On startup the user-preset sync thread scans the preset folder for orphaned
.info files (scan_orphaned_info_files). It iterated the directory with a
throwing boost::filesystem::directory_iterator while running on a background
thread that has no exception guard. On macOS, readdir() can intermittently
fail with ENOTSUP (errno 45); boost then throws filesystem_error, which --
uncaught on the sync thread -- calls std::terminate and aborts the whole
application on startup.
- Iterate with the error_code-based directory_iterator so a transient read
failure is logged and skipped instead of thrown. The orphan scan is
best-effort and re-runs on the next sync, so skipping a cycle is harmless.
This mirrors the existing pattern in has_json_presets() and the plugin scan.
- Wrap the entire sync-thread body in try/catch as defense-in-depth, so no
future uncaught exception on that otherwise-unguarded thread can abort the
app.
The Filament Track Switch (H2-series accessory, product code O2L-FTS) feeds
every AMS to both extruders through a two-track switch. Port full support
across the device layer, project config, and GUI.
Device / config:
- Model the switch-aware AMS binding (the set of extruders an AMS can feed
and which input track A/B feeds it), switch readiness, the O2L-FTS firmware
module, and the fun2 capability bit for checking a slice against installed
hardware.
- Register has_filament_switcher and enable_filament_dynamic_map as project
config that persists with the project and restores from a saved 3mf, and
force both back to false on every project/printer/CLI load path. Live
device sync is the only thing that sets them true.
GUI:
- Sidebar sync activates the switch from live device state, attributes each
AMS to the extruder its input track feeds, shows a floating status icon
(ready / not-calibrated), and surfaces a one-time tip / not-calibrated
warning.
- Send dialog gains a non-blocking slice-vs-hardware mismatch warning and a
blocking error when a slice needs dynamic nozzle mapping but the switch is
missing or not set up.
- AMS load/unload guards, AMS-view routing glyph + un-calibrated banner +
hidden external-spool road, and mapping-popup external-spool lockout.
- Filament pickers collapse the per-extruder split into a single deduplicated
"AMS filaments" group with a smart-assign toggle when the switch is ready.
- Firmware-upgrade panel lists the O2L-FTS accessory and its version.
- Device-provided filament-change steps (ams.cfs) drive the change-step
display when firmware sends them, including the three switch steps.
- "Load current filament" asks which extruder to feed via a
FeedDirectionDialog when the switch is calibrated.
Inert without the accessory: every path is gated on the switch being
installed (MQTT aux bit 29, default off) or ready, both project flags default
false, and the per-extruder AMS attribution is byte-identical, so AMS state,
the send/load UI, and sliced g-code are unchanged for every printer that does
not report a Filament Track Switch.
* fix: out-of-bounds read computing tool-ordering max layer height
calc_max_layer_height() loops over the extruder count (nozzle_diameter)
but indexes max_layer_height with the same counter, reading past the end
when that array is shorter. Silent on release builds, aborts under a
bounds-checked STL (_GLIBCXX_ASSERTIONS).
Read via get_at(), which falls back to the first entry when the index is
out of range, as Slicing.cpp already does for this option.
Add a fff_print regression test slicing a two-extruder printer with a
single-entry max_layer_height.
* docs: clarify how max_layer_height ends up short in the regression test
Normalization sizes it to the filament count under single_extruder_multi_material,
not "a mismatch a profile can ship" as the earlier comment guessed.
round() already had unit coverage; floor() and ceil() had none. Add the missing
positive cases for both signs, plus round()'s half-away-from-zero tie-break, and
one negative case asserting that a name outside the grammar's built-in function
set is treated as an undefined variable and throws, rather than being passed
through to a math library.
GCode::extrude_support declared its per-path speed helper as a function-local
static lambda that captures `this` by reference. The closure is built once, on
the first extrude_support call, and reused for the rest of the process, so a
second G-code export in the same process runs the helper against a `this` from
the first export's stack frame, which has already returned.
The stale `this` flows through NOZZLE_CONFIG(...) -> cur_extruder_index() ->
GCodeWriter::filament(), reading a garbage current-extruder id and indexing
with it. It is silent whenever the reused stack still holds a usable pointer,
and an order-dependent SIGSEGV otherwise; AddressSanitizer reports it as a
stack-use-after-return in GCodeWriter::filament(). It is the only static
capturing lambda in libslic3r.
Drop static so the closure is rebuilt each call against the live frame. Add an
fff_print regression test that slices a support object twice in one process; it
fails without the fix (stack-use-after-return under ASan) and passes with it.
Multi-nozzle sync widget, AMS rack-nozzle mapping popup, calibration rework, send-dialog nozzle mapping and extruder-count UI. Includes the fix to persist the AMS sync badge on filament cards (H2C/A2L and direct-sync printers).
Nozzle rack data model and device-tab panel, multi-nozzle sync, per-nozzle filament blacklist, and print-dispatch nozzle mapping (DevNozzleMappingCtrl V0/V1).
* ci: run unit tests on Windows and macOS
The Unit Tests CI job only ran on Linux, so platform-specific bugs
invisible to a Linux build could land undetected (e.g. the MSVC-only
NfpPlacer crash fixed in #14267). The full non-[NotWorking] suite already
builds and passes on every shipped arch, so this wires them into CI.
A reusable unit_tests.yml, called once per built arch, downloads that
arch's test artifact and runs ctest. Each build leg builds the test
executables and uploads them; a single publish_test_results job on Linux
aggregates the JUnit results into one check.
Coverage: Linux x86_64 + aarch64, Windows x64 + arm64, macOS arm64.
macOS x86_64 is deferred (cross-built on arm64, needs Rosetta).
- build_release_vs.bat: "tests" token enables BUILD_TESTS
- build_release_macos.sh: -T builds and runs tests; ORCA_TESTS_BUILD_ONLY
builds them without running (used by CI)
- scripts/run_unit_tests.sh: parameterized test dir and build config
Addresses #11273.
* ci: bump actions/checkout to v7 in reusable unit_tests workflow
Match the actions/checkout v6->v7 bump (#14517) that upstream applied to
the inline test job this reusable workflow replaces.
* fix: isolate calibration temp paths per user
The calibration temp files under <temp>/calib were file-scope statics
initialized before set_temporary_dir() runs at startup, so they kept
using the shared system temp root and missed the per-user isolation
added in #14607. On Linux every account shares /tmp, so the first user
to calibrate owns /tmp/calib and later users fail to write there, the
same cross-user collision #14607 fixed for model backups, STEP import,
and part skip.
Build the paths lazily from temporary_dir() instead, through a
calib_temp_dir() accessor and a calib_temp_file() join helper. The base
becomes <temp>/orcaslicer_<uid>/calib on Linux and is unchanged on
Windows, where the temp dir is already per user.
Also make StoreParams::path a std::string rather than a non-owning
const char*. The calibration code had to keep a std::string alive
solely to feed that pointer, and the field was uninitialized by
default; owning the string removes the lifetime hazard for all three
callers and makes the entry guard a reliable empty() check. Confined to
the 3mf project exporter (three callers, two internal reads); no
on-disk, format, or ABI impact.
Follows up on #14607 per @Noisyfox's review suggestion.
* dedupe-issues.yml remove unsupported claude_args option
claude_args: is causing an error. Only calling for "--model" anyway, so replaced with model: option.
* Merge branch 'main' into MisterAnderson91-dedupe-issues-yml-update
* fix: prevent out-of-bounds crash in Arachne beading interpolation
SkeletalTrapezoidation::interpolate() derives an inset index from `left` but
uses it to index the merged beading, which follows the thicker of left/right.
When the thicker side has fewer insets, the index runs past the end and the
slicer crashes during "Generating walls".
Skip the adjustment when the index is out of range, as the adjacent guards
already do. interpolate() uses no instance state, so make it static and add a
regression test that exercises it directly.
Fixes#14584
* Support Painting: add Vertical/Horizontal axis-lock checkboxes
Adds the Vertical and Horizontal axis-lock checkboxes to the Support
Painting gizmo, matching the UI in the MMU Segmentation and Seam
Painter gizmos. The underlying constraint logic has lived in
GLGizmoPainterBase since #2424 and already applies to any
ToolType::BRUSH action — the Support gizmo was the only painter
without the UI to enable it.
The Circle and Sphere brush arms are consolidated into a single
"if (Circle || Sphere)" block matching the structure of
GLGizmoMmuSegmentation::on_render_input_window, eliminating
duplicate cursor-radius and axis-lock UI code.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Support Painting: keep Circle/Sphere as separate tool arms per review
Reviewer requested keeping a separate condition per tool for future
extensibility rather than merging Circle and Sphere into one branch.
This restores the upstream Circle/Sphere arm structure and adds the
Vertical/Horizontal axis-lock options to each arm, making the change
purely additive over upstream.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com>
Co-authored-by: yw4z <ywsyildiz@gmail.com>
feat: add regex_replace() string transform to filename templates
The filename template language could test strings (=~, !~, one_of) but
never rewrite one, so there was no supported way to reshape a placeholder
value, such as dropping a file extension from {first_object_name}.
Add regex_replace(subject, /pattern/, replacement), reusing the existing
regex-literal syntax and boost::regex engine. Every placeholder keeps
returning its exact value and the template does the transform explicitly:
{regex_replace(first_object_name, /\.[^.]*$/, "")} strip any extension
The replacement may reference capture groups ($1, $2, ...). It is one
grammar function mirroring digits(), with the name registered as a keyword
so it is not parsed as a variable.
* fix: initialize Print::m_isBBLPrinter
Built outside the GUI/CLI (headless tests, embedded use) the member was read
uninitialized: is_BBL_printer()/wipe_tower_type() feed it into ToolOrdering,
which then non-deterministically dropped per-feature filament assignments.
Default it to false, the value the GUI and CLI already assign for non-Bambu
printers.
* docs(test): add the fff_print testing contract
tests/fff_print/README.md codifies how the suite is organized: one file per
subsystem (each owning both in-memory and emitted-G-code assertions), flat
behavioral test names with a single [Subsystem] tag, a robust-tests guide,
the shared helpers, and an add-a-test checklist. Linked from tests/CLAUDE.md.
* test(fff_print): reorganize the suite to the contract and add coverage
Bring every subsystem into one file per the README: rename the test_data
harness to test_helpers; consolidate skirt/brim; split multi-filament and
cooling into their own files; disperse the test_printgcode grab-bag and the
end-to-end smoke scenario into focused tests; fold test_gcode into
test_gcodewriter. Standardize names and tags, align cube tests on the cube()
helper, and de-qualify the flagship files.
New coverage: multi-filament per-feature and per-object routing; a skirt/brim
behavior matrix (the #14333 rework, including brim ears, with regression
coverage for #14319 and #14366); resolved extrusion-width and config
comments; custom-G-code placeholders; fan control and speed-marker
consumption.
Re-enable three slice tests previously tagged [NotWorking]: the clipper
"Coordinate outside allowed range" error that disabled them was specific to a
past CI runner environment and no longer reproduces.
* test(fff_print): tag arm64-flaky skirt/brim tests NotWorking
Four skirt/brim slice tests intermittently throw ClipperLib's "Coordinate
outside allowed range" on the macOS and Windows arm64 CI toolchains (an FP
divergence, not a slicing bug; see PR #14207). Linux x86_64 and aarch64 are
unaffected. Tag them [NotWorking] so ctest -LE NotWorking skips them.
* test(fff_print): re-enable the arm64 skirt/brim tests
These were tagged [NotWorking] as a stopgap when myfork's daily-driver build
combined them with the cross-platform CI on a base that predated upstream's
m_origin fix (99dea01cc3). With upstream merged in, Print::m_origin is
initialized and the "Coordinate outside allowed range" throw is gone, so the
tests pass on macOS/Windows arm64. Drop the tags.
fix(gui): avoid null-pointer UB in create_scaled_bitmap with win == nullptr
create_scaled_bitmap() documents that win may be nullptr, but called
win->FromDIP() on it. Calling a member function through a null pointer
is undefined behavior: clang assumes `this` is non-null and deletes the
subsequent `win ?` null check added in #13117, turning the fallback
branch into an unconditional virtual call through a null vtable.
This crashed LLVM/clang-cl builds at startup (access violation reading
0x0 in BBLTopbar creation); MSVC builds were unaffected by luck.
Use the static, null-safe wxWindow::FromDIP(x, win) overload instead,
which falls back to the primary display DPI. Behavior is unchanged for
non-null windows.
On Linux every account shares /tmp, but slicing builds temp paths there under
fixed, app-owned names via temporary_dir() (model backups, STEP import,
part-skip). The first user to slice creates and owns those dirs, so the next
user cannot write under them and slicing crashes with "No such file or
directory".
Tag the app temp root with the user id at startup (<temp>/orcaslicer_<uid>)
so every temporary_dir() consumer is isolated at once. The id stays at the
top level of the world-writable system temp so each user's dir is created
directly there; a shared parent dir would be owned by whichever user made it
first. The root is pre-created because STEP import writes into it directly.
Windows keeps the plain temp dir since it is already per-user.
Fixes#10108. Same root cause as #5969.
* fix profile reference for Creality
* fix profile reference for Blocks
* fix profile reference for OrcaArena
* fix profile reference for re3D
* fix profile reference for Chuanying
* fix profile reference for Prusa
* fix profile reference for Wanhao France
* fix profile reference for MagicMaker
* fix profile reference for Afinia
Remove the ABS/ABS+/PLA/TPU/Value ABS/Value PLA filament presets that referenced the non-existent "Afinia H400 Pro" printer. The real printer is "Afinia H+1(HS)", already served by the @HS filament variants.
* fix profile reference for Comgrow
Remove the orphaned "0.20mm Standard @Comgrow T500 1.0" process preset and its process_list entry. Its only compatible printer "Comgrow T500 1.0 nozzle" never existed (the T500 model defines nozzle diameters 0.4/0.6/0.8 only).
* always run check_preset_references
The 409 conflict notification, the force-push confirmation dialog, and the payload-too-large (413) dialog now name the affected preset. The name was already parsed from the conflict body but never surfaced. The account-level preset-limit message stays generic since it isn't about one specific preset.
